Highlights:
- Bugfix for order in which /delete-node/ and /delete-property/ are
processed [0]
- /omit-if-no-ref/ support has been added (used only by U-Boot at this
point, in theory)
- GPL dtc compat version bumped to 1.4.7
- Various small fixes and compatibility improvements
Kyle Evans [Thu, 28 Mar 2019 03:31:51 +0000 (03:31 +0000)]
if_bridge(4): ensure all traffic passing over the bridge is accounted for
Consider a bridge0 with em0 and em1 members. Traffic rx'd by em0 and
transmitted by bridge0 through em1 gets accounted for in IPACKETS/IBYTES
and bridge0 bpf -- assuming it's not unicast traffic destined for em1.
Unicast traffic destined for em1 traffic is not accounted for by any
mechanism, and isn't pushed through bridge0's bpf machinery as any other
packets that pass over the bridge do.
Fix this and simplify GRAB_OUR_PACKETS by bailing out early if it was rx'd
by the interface that it was addressed for. Everything else there is
relevant for any traffic that came in from one member that's being directed
at another member of the bridge.
Ravi Pokala [Wed, 27 Mar 2019 21:50:01 +0000 (21:50 +0000)]
Teach jedec_dimm(4) to be more forgiving of non-fatal errors.
It looks like some DIMMs claim to have a TSOD, but actually don't. Some
claim they weren't able to change the SPD page, but they did. Neither of
those should be fatal errors.
PR: 235944
Submitted by: Greg V <greg@unrelenting.technology>
Reported by: Greg V <greg@unrelenting.technology>
Reviewed by: cem
MFC after: 1 weeks
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D19681
Mark Johnston [Wed, 27 Mar 2019 19:40:18 +0000 (19:40 +0000)]
Fix pidfile_open(3) to handle relative paths with multiple components.
r322369's use of basename(3) was incorrect and worked by accident so
long as the pidfile path was absolute or consisted of a single
component. Fix the basename() usage and add a regression test.
Reported by: 0mp
Reviewed by: cem
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19728
Mark Johnston [Wed, 27 Mar 2019 19:32:21 +0000 (19:32 +0000)]
Prepend DW_AT_comp_dir to relative line number directory table entries.
Relative directories may appear in the line number program for a CPU if
files were included via a relative path, for instance with "-I.".
Previously, dwarf_srclines(3) and dwarf_srcfiles(3) would return the
relative path, so addr2line, for instance, would do the same. However,
we can get an absolute path by prepending the compilation directory, so
change libdwarf to do that to improve compatibility with GNU binutils
and since it is more useful in general.
Reviewed by: jhb
Discussed with: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19705
Bruce Evans [Wed, 27 Mar 2019 18:03:34 +0000 (18:03 +0000)]
Fix accessing pixels under the mouse cursor:
Reading of single pixels didn't look under the cursor.
Copying of 1x1 bitmaps didn't look under the cursor for either reading
or writing.
Copying of larger bitmaps looked under the cursor for at most the
destination.
Copying of larger bitmaps looked under a garbage cursor (for the Display
bitmap) when the destination is a MEMBUF. The results are not used, so
this only wasted time and flickered the cursor.
Writing of single pixels looked under a garbage cursor for MEMBUF
destinations, as above except this clobbered the current cursor and
didn't update the MEMBUF. Writing of single pixels is not implemented
yet in depths > 8. Otherwise, writing of single pixels worked. It was
the only working case for accessing pixels under the cursor.
Clearing of MEMBUFs wasted time freezing the cursor in the Display bitmap.
The fixes abuse the top bits in the color arg to the cursor freezing
function to control the function. Also clear the top 8 bits so that
applications can't clobber the control bits or create 256 aliases for
every 24-bit pixel value in depth 32.
Races fixed:
Showing and hiding the cursor only tried to avoid races with the mouse
event signal handler for internal operations. There are still many
shorter races from not using volatile or sig_atomic_t for the variable
to control this. This variable also controls freezes, and has more
complicated states than before.
The internal operation of unfreezing the cursor opened a race window
by unsetting the signal/freeze variable before showing the cursor.
Bruce Evans [Wed, 27 Mar 2019 08:02:55 +0000 (08:02 +0000)]
Fix copying of bitmaps in depths > 8. This fix is complete, except different
depths for the source and target are not supported. The bits for higher
numbered planes (mostly for red) were either not copied or were copied to
lower numbered planes for nearby pixels.
Quick fix for creation of mouse cursor bitmaps in all depths. This fix is
only complete for the default lightwhite cursor with a black frame.
Even the lightwhite and black colors are hard to find. The templates
use 0xff for lightwhite, but that means brightblue in the simplest mode
(Truecolor depth 24). Other modes are even more complicated -- they are
singly or doubly indirect throught palette(s) and changing of the palettes
by applications is supported.
Details:
Replicate the template value for Truecolor modes to fill out the target
depth (and more for depths not a multiple of 8). Do this for every
drawing of the cursor so that it sort of works for mouse cursor bitmaps
set by applications.
Use 0xf for lightwhite in most other modes. Only do this for the
default cursor so that it doesn't affect mouse cursor bitmaps set by
applications. 0xf mostly works because it was originally for CGA
lightwhite and is emulated using 1 or 2 indirections on EGA and VGA.
0x3f (EGA white) and 0xff (VGA black) direct palette indexes mostly
don't work since backwards compatibility inhibits or prevents them
representing lightwhite. But 0x3f (EGA white) must be used for mode
37 (VGA_MODEX) (320x240x8 V) since this mode is closer to EGA than VGA.
Conrad Meyer [Tue, 26 Mar 2019 22:45:41 +0000 (22:45 +0000)]
x86: Use XSAVEOPT for fpusave(), when available
Remove redundant npxsave_core definition while here.
Suggested by: Anton Rang
Reviewed by: kib, Anton Rang <rang AT acm.org>
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19665
John Baldwin [Tue, 26 Mar 2019 20:56:12 +0000 (20:56 +0000)]
Add special psuedo-options for the base/{binutils,gcc} ports.
The WITH_PORT_BASE_{BINUTILS,GCC} options are used to prevent 'make check-old'
and 'make delete-old' from deleting files installed by the base/binutils
and base/gcc packages as normally one disables the in-tree variants
(e.g. WITHOUT_BINUTILS) when using these packages.
Ed Maste [Tue, 26 Mar 2019 20:32:05 +0000 (20:32 +0000)]
stand: remove CLANG_NO_IAS from zfsldr
Many components under stand/ had CLANG_NO_IAS added when Clang's
Integrated Assembler (IAS) did not handle .codeNN directives. Clang
gained support quite some time ago, and we can now build stand/ with
IAS.
Note that in some cases there are small differences in the generated
output, so CLANG_NO_IAS should be removed only after testing (or after
finding no differences in the output). For zfsldr I compared objdump
output between GNU as- and Clang IAS-built zfsldr and .text was
identical (changes were limited to the object's ELF headers and debug
info).
Ed Maste [Tue, 26 Mar 2019 19:38:25 +0000 (19:38 +0000)]
init: pedantic correction to "can't exec" script warning
Direct /etc/rc exec was introduced in r337321, with a fallback to
passing it to sh if direct exec fails. "Can't exec" is slightly
misleading in this case (the script is still executed, just not
directly).
Change default value of kern.bootfile to reflect reality
In most cases kernel.bootfile is populated from the information
provided by loader(8). There are certain scenarios when loader
is not available, for instance when kernel is loaded by u-boot
or some other BootROM directly. In this case the default value
"/kernel" points to invalid location and breaks some functinality,
like using installkernel on self-hosted system or dtrace's CTF
lookup. This can be fixed by setting the value manually but the
default that reflects correct location is better than default that
points to invalid one.
Current default was set around FreeBSD 1, when "/kernel" was the
actual path. Transition to /boot/kernel/kernel happened circa FreeBSD 3.
Make smartpqi(4) behave better when running out of memory, by returning
CAM_RESRC_UNAVAIL instead of CAM_REQUEUE_REQ. This makes CAM delay a bit
before retrying, so that the retries actually get a chance to succeed.
Factor out resource limit enforcement code in the ELF loader.
It makes the code slightly easier to follow, and might make
it easier to fix the resouce accounting to also account for
the interpreter.
The PROC_UNLOCK() is moved earlier - I don't see anything
it should protect; the lim_max() is a wrapper around lim_rlimit(),
and that, differently from lim_rlimit_proc(), doesn't require
the proc lock to be held.
Randall Stewart [Tue, 26 Mar 2019 10:41:27 +0000 (10:41 +0000)]
Fix a small bug in the tcp_log_id where the bucket
was unlocked and yet the bucket-unlock flag was not
changed to false. This can cause a panic if INVARIANTS
is on and we go through the right path (though rare).
* Cache moea64_need_lock in a local variable; gcc generates slightly better
code this way, it doesn't need to reload the value from memory each read.
* VPN cropping is only needed on PowerPC ISA 2.02 and older cores, a subset
of those that need serialization, so move this under the need_lock check,
so those that don't need the lock don't even need to check this.
Kyle Evans [Tue, 26 Mar 2019 02:45:23 +0000 (02:45 +0000)]
Allow kernel config to specify DTS/DTSO to build, and out-of-tree support
This allows for directives such as
makeoptions DTS+=/out/of/tree/myboard.dts
# in tree! Same rules applied as if this were in a dtb/ module
makeoptions DTS+=otherboard.dts
to be specified in config(5) and have these built/installed alongside th
kernel. The assumption that overlays live in an overlays/ directory is only
made for in-tree DTSO, but we still make the assumption that out-of-tree
arm64 DTS will be in vendored directories (for now).
This lowers the cost to hacking on an overlay or dts by being able to
quickly throw it in a custom config, especially if it doesn't fit one of the
current dtb/modules quite appropriately or it's not intended for commit
there.
The build/install targets were split out of dtb.mk to centralize the build
logic and leave out the all/realinstall/CLEANFILES additions... it was
believed that we didn't want to pollute the kernel build with these.
The build rules were converted to suffix rules at the suggestion of Ian to
clean things up a little bit in a world where we can have mixed
in-tree/out-of-tree DTS/DTSO specified.
Reviewed by: ian
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19351
Kyle Evans [Tue, 26 Mar 2019 02:33:27 +0000 (02:33 +0000)]
lualoader: Clear the screen before prompting for password
Assuming that the autoboot sequence was interrupted, we've done enough
cursor manipulation that the prompt for the password will be sufficiently
obscured a couple of lines up. Clear the screen and reset the cursor
position here, too.
Mark Johnston [Mon, 25 Mar 2019 21:38:58 +0000 (21:38 +0000)]
Reject F_SETLK_REMOTE commands when sysid == 0.
A sysid of 0 denotes the local system, and some handlers for remote
locking commands do not attempt to deal with local locks. Note that
F_SETLK_REMOTE is only available to privileged users as it is intended
to be used as a testing interface.
Reviewed by: kib
Reported by: syzbot+9c457a6ae014a3281eb8@syzkaller.appspotmail.com
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19702
Martin Matuska [Mon, 25 Mar 2019 11:49:57 +0000 (11:49 +0000)]
MFV r345495:
Sync libarchive with vendor.
Relevant vendor changes:
PR #1153: fixed 2 bugs in ZIP reader [1]
PR #1143: ensure archive_read_disk_entry_from_file() uses ARCHIVE_READ_DISK
Changes to file flags code, support more file flags on FreeBSD:
UF_OFFLINE, UF_READONLY, UF_SPARSE, UF_REPARSE, UF_SYSTEM
UF_ARCHIVE is not supported by intention (yet)
Bruce Evans [Mon, 25 Mar 2019 11:48:40 +0000 (11:48 +0000)]
Fix another type of buffer overrun for segmented modes. The buffer index
was not taken modulo the window size in VGLClear().
Segmented modes also need a kernel fix to almost work. The ioctl to set
the window origin is broken.
These bugs are rarely problems since non-VESA modes only need
segmentation to support multiple pages but libvgl doesn't support
multiple pages and treats these modes as non-segmented, and VESA modes
are usually mapped linearly except on old hardware so they really are
non-segmented.
Relevant vendor changes:
PR #1153: fixed 2 bugs in ZIP reader
PR #1143: ensure archive_read_disk_entry_from_file() uses ARCHIVE_READ_DISK
Changes to file flags code, support more file flags on FreeBSD:
UF_OFFLINE, UF_READONLY, UF_SPARSE, UF_REPARSE, UF_SYSTEM
UF_ARCHIVE is not supported by intention (yet)
Allan Jude [Mon, 25 Mar 2019 07:46:20 +0000 (07:46 +0000)]
Make TMPFS_PAGES_MINRESERVED a kernel option
TMPFS_PAGES_MINRESERVED controls how much memory is reserved for the system
and not used by tmpfs.
On very small memory systems, the default value may be too high and this
prevents these small memory systems from using reroot, which is required
for them to install firmware updates.
Bruce Evans [Sun, 24 Mar 2019 20:43:21 +0000 (20:43 +0000)]
Oops, my previous commit to libvgl was missing the change of VGLSetBorder()
to match the change in its declaration. Change the declaration back to
"byte color" since setting of the border color is not supported for more
than 256 colors.
Bruce Evans [Sun, 24 Mar 2019 19:41:45 +0000 (19:41 +0000)]
Add support for arbitrary font widths. Only multiples of 8 were supported.
Since the font format is undocumented, it is unclear how non-multiples
of 8 should be padded to bytes in the font file. Use the same
representation as bdf text format (big- endian, with padding in the
lower bits).
Bruce Evans [Sun, 24 Mar 2019 19:27:03 +0000 (19:27 +0000)]
Fix reading of pixels in (4 and 8-plane) planar modes.
There seems to be no alternative to reading each plane independently using
3 slow i/o's per plane (this delivers 8 nearby pixels, but we don't buffer
the results so run 8 times slower than necessary.
All the code for this was there, but it was ifdefed out and replaced by
simpler code that cannot work in planar modes. The ifdefed out code
was correct except it was missing a volatile declaration, so compilers
optimized the multiple dummy reads in it to a single read.
Ian Lepore [Sun, 24 Mar 2019 19:11:45 +0000 (19:11 +0000)]
Support device-independent labels for geom_flashmap slices.
While geom_flashmap has always supported label names for its slices, it does
so by appending "s.labelname" to the provider device name, meaning you still
have to know the name and unit of the hardware device to use the labels.
These changes add support for device-independent geom_flashmap labels, using
the standard geom_label infrastructure. geom_flashmap now creates a softc
struct attached to its geom, and as it creates slices it stores the label
into an array in the softc. The new geom_label_flashmap uses those labels
when tasting a geom_flashmap provider.
Scott Long [Sun, 24 Mar 2019 19:09:50 +0000 (19:09 +0000)]
r329522 created problemss with commands that enter the TIMEDOUT state but
are successfully returned by the card (usually due to an abort being issued
as part of timeout recovery). Remove what amounts to an insufficient
KASSERT, and don't overwrite the state value. State should probably be
re-designed, and that will be done with a future commit.
Bruce Evans [Sun, 24 Mar 2019 18:57:03 +0000 (18:57 +0000)]
Fix buffer overruns in modes with color depth more than 8.
Support for 16-bit and 32-bit Truecolor modes was supposed to be
complete in r70991 of main.c and in nearby revisions for other files, but
it was broken by the overruns in most cases (all cases were the mouse
is enabled, and most cases where bitmaps are used). r70991 also
uninintentionally added support for depths 9-15, 17-23 and 25-31.
Depth 24 was more obviously broken and its support is ifdefed out. In
the other ranges, only depth 15 is common. It was broken by buffer
overruns in all cases.
bitmap.c:
- the static buffer was used even when it was too small (but it was
large enough to often work accidentally in depth 16)
- the size of the dynamically allocated buffer was too small
- the sizing info bitmap->PixelBytes was not inititialzed in the bitmap
constructor. It often ended up as 0 for MEMBUFs, so using it in more
places gave more null pointer accesses. (It is per-bitmap, but since
conversion between bitmaps of different depths is not supported (except
from 4 bits by padding to 8), it would work better if it were global.)
main.c:
- depths were rounded down instead of up to a multiple of 8, so PixelBytes
was 1 too small for depths above 8 except 16, 24 and 32.
- PixelBytes was not initialized for 4-bit planar modes. It isn't really
used for frame buffer accesses in these modes, but needs to be 1 in
MEMBUF images.
mouse.c:
- the mouse cursor buffers were too small.
vgl.h:
- PixelBytes was not initialized in the static bitmap constructor. It
should be initialized to the value for the current mode, but that is
impossible in a static constructor. Initialize it to -1 so as to
fail if it is used without further initialization.
All modes that are supposed to be supported now don't crash in
nontrivial tests, and almost work. Missing uses of PixelBytes now
give in-bounds wrong pointers instead of overruns. Misconversions of
bitmaps give multiple miscolored mouse cursors instead of 1 white one,
and similarly for bitmaps copied through a MEMBUF.
Ian Lepore [Sun, 24 Mar 2019 18:51:52 +0000 (18:51 +0000)]
Distinguish between "no partition" and "choose best partition" with a constant.
The values of the d_slice and d_partition fields of a disk_devdesc have a
few values with special meanings in the disk_open() routine. Through various
evolutions of the loader code over time, a d_partition value of -1 has
meant both "use the first ufs partition found in the bsd label" and "don't
open a bsd partition at all, open the raw slice."
This defines a new special value of -2 to mean open the raw slice, and it
gives symbolic names to all the special values used in d_slice and
d_partition, and adjusts all existing uses of those fields to use the new
constants.
The phab review for this timed out without being accepted, but I'm still
citing it below because there is useful commentary there.
Ian Lepore [Sun, 24 Mar 2019 18:02:27 +0000 (18:02 +0000)]
Revert accidental change that should not have been included in r345475.
I had changed this value as part of a local experiment, and neglected to
change it back before committing the other changes.
Ian Lepore [Sun, 24 Mar 2019 17:53:26 +0000 (17:53 +0000)]
Truncate a too-long interrupt handler name when there is only one handler.
There are only 19 bytes available for the name of an interrupt plus the
name(s) of handlers/drivers using it. There is a mechanism from the days of
shared interrupts that replaces some of the handler names with '+' when they
don't all fit into 19 bytes.
In modern times there is typically only one device on an interrupt, but long
device names are the norm, especially with embedded systems. Also, in systems
with multiple interrupt controllers, the names of the interrupts themselves
can be long. For example, 'gic0,s54: imx6_anatop0' doesn't fit, and
replacing the device driver name with a '+' provides no useful info at all.
When there is only one handler but its name was too long to fit, this
change truncates enough leading chars of the handler name (replacing them
with a '-' char to indicate that some chars are missing) to use all 19
bytes, preserving the unit number typically on the end of the name. Using
the prior example, this results in: 'gic0,s54:-6_anatop0' which provides
plenty of info to figure out which device is involved.
PR: 211946
Reviewed by: gonzo@ (prior version without the '-' char)
Differential Revision: https://reviews.freebsd.org/D19675
Bruce Evans [Sun, 24 Mar 2019 16:47:43 +0000 (16:47 +0000)]
Fix libvgl to not always fail to initialize due to its invalid mmap()
args (neither MAP_PRIVATE nor MAP_SHARED). It was broken in r271635
and/or r271724 by stricter checking. The compatibility code in r271724
doesn't work for my old binaries (actually new binaries with old
libraries).
Dmitry Chagin [Sun, 24 Mar 2019 14:50:02 +0000 (14:50 +0000)]
Update syscall.master to 5.0.
For 32-bit Linuxulator, ipc() syscall was historically
the entry point for the IPC API. Starting in Linux 4.18, direct
syscalls are provided for the IPC. Enable it.
Dmitry Chagin [Sun, 24 Mar 2019 14:44:35 +0000 (14:44 +0000)]
Linux between 4.18 and 5.0 split IPC system calls.
In preparation for doing this in the Linuxulator modify our linux_shmat()
to match actual Linux shmat() system call.
Michael Tuexen [Sat, 23 Mar 2019 22:46:29 +0000 (22:46 +0000)]
Limit the number of bytes which can be queued for SCTP sockets.
This is joint work with rrs@.
Reported by: syzbot+307f167f9bc214f095bc@syzkaller.appspotmail.com
MFC after: 1 week
Ravi Pokala [Sat, 23 Mar 2019 19:53:15 +0000 (19:53 +0000)]
Add descriptions for sysctls in kern_mib.c and sysctl.3 which lack them.
r343532 noted the difference between "hw.realmem" and "hw.physmem", which I
was previously unaware of. I discovered that neither sysctl had a
description visible via `sysctl -d', so I found where they were defined and
added suitable descriptions. While in the file, I went ahead and added
descriptions for all the others which lacked them. I also updated sysctl.3
accordingly
ASLR: check for max_addr after applying randomization, not before.
Otherwise resulting address from vm_map_find() migh not satisfy the
upper limit. For instance, it could affect MAP_32BIT flag from 64bit
processes.
Found by: Doug Moore <dougm@rice.edu>
Reviewed by: alc, Doug Moore <dougm@rice.edu>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19688
Add ability to automatically load ipfw_nat64, ipfw_nptv6 and ipfw_pmod
modules by declaring corresponding variables in rc.conf. Also document
them in rc.conf(5).
Dimitry Andric [Sat, 23 Mar 2019 14:10:05 +0000 (14:10 +0000)]
Pull in r356809 from upstream llvm trunk (by Eli Friedman):
[ARM] Don't form "ands" when it isn't scheduled correctly.
In r322972/r323136, the iteration here was changed to catch cases at
the beginning of a basic block... but we accidentally deleted an
important safety check. Restore that check to the way it was.
This should fix "Assertion failed: (LiveCPSR && "CPSR liveness tracking
is wrong!"), function UpdateCPSRUse" errors when building the devel/xwpe
port for armv7.
Marcin Wojtas [Sat, 23 Mar 2019 05:13:51 +0000 (05:13 +0000)]
Allow using TPM as entropy source.
TPM has a built-in RNG, with its own entropy source.
The driver was extended to harvest 16 random bytes from TPM every 10 seconds.
A new build option "TPM_HARVEST" was introduced - for now, however, it
is not enabled by default in the GENERIC config.
Attempting to build www/firefox on POWER9 resulted in a HMI exception being
thrown, a fatal trap currently. This is typically caused by timer facility
errors, but examination of the Hypervisor Maintenance Exception Register
(HMER) yielded only that an exception had recovered, with no information of
the actual exception cause.
When an HMI occurs, OPAL_HANDLE_HMI or OPAL_HANDLE_HMI2 must be called to
handle the exception at the firmware level. If the exception is handled, we
can continue.
This adds only the preliminary handler, enough to prevent package building
from panicking. An enhancement in the future is to use the flags returned
by OPAL_HANDLE_HMI2 to print more useful error messages, and log maintenance
events.
Marcin Wojtas [Sat, 23 Mar 2019 02:48:47 +0000 (02:48 +0000)]
Update mvneta/e6000sw for new DSA Device Tree Bindings
In the latest Linux kernel revisions the DSA (Distributed
Switch Architecture) device tree binding was changed.
Instead of the top level dsa@ node, the switch and its
ports is represented as a child node of the mdio bus.
With that other modifications were added, such as
relation with the ethernet port of the SoC. Adjust
e6000sw etherswitch and mvneta drivers to that.
Tested on Armada 3720 EspressoBin and Armada 388 Clearfog Pro boards.
Mariusz Zaborski [Sat, 23 Mar 2019 02:17:07 +0000 (02:17 +0000)]
strings: return an error code and the char value separately
If we returning 32 bits value it's hard to distinguish if the returned value
is a valid one or if its an error (in case of EOF). For that reason separate
exit code of the function from the returned character.