jhb [Tue, 10 Feb 2015 21:41:56 +0000 (21:41 +0000)]
MFC 277709:
Use an sbuf to generate the output of the net.inet.tcp.hostcache.list
sysctl to avoid a possible buffer overflow if the cache grows while the
text is being generated.
jhb [Tue, 10 Feb 2015 16:34:42 +0000 (16:34 +0000)]
MFC 273800:
Rework virtual machine hypervisor detection.
- Move the existing code to x86/x86/identcpu.c since it is x86-specific.
- If the CPUID2_HV flag is set, assume a hypervisor is present and query
the 0x40000000 leaf to determine the hypervisor vendor ID. Export the
vendor ID and the highest supported hypervisor CPUID leaf via
hv_vendor[] and hv_high variables, respectively. The hv_vendor[]
array is also exported via the hw.hv_vendor sysctl.
- Merge the VMWare detection code from tsc.c into the new probe in
identcpu.c. Add a VM_GUEST_VMWARE to identify vmware and use that in
the TSC code to identify VMWare.
hselasky [Tue, 10 Feb 2015 13:29:44 +0000 (13:29 +0000)]
MFC r278103:
The flowid and hashtype should be copied from the originating packet
when fragmenting IP packets to preserve the order of the packets in a
stream. Else the resulting fragments can be sent out of order when the
hardware supports multiple transmit rings.
hselasky [Tue, 10 Feb 2015 13:25:29 +0000 (13:25 +0000)]
MFC r278074:
Optimise allocation of USB DMA structures. By default don't double map
allocations if only one element should be allocated per page
cache. Make one allocation per element compile time configurable. Fix
a comment while at it.
hselasky [Tue, 10 Feb 2015 13:16:53 +0000 (13:16 +0000)]
MFC r278071:
Section 3.2.9 in the XHCI specification about control transfers says
that we should use a normal-TRB if there are more TRBs extending the
data-stage TRB. Add a dedicated state bit to the internal USB transfer
flags to handle this case.
dim [Tue, 10 Feb 2015 07:35:16 +0000 (07:35 +0000)]
MFC r278348:
Fix a number of -Wcast-qual warnings in ath's ar9300_attach.c, by making
the ia_array field of struct ar9300_ini_array const, and removing the
const-dropping casts. No functional change.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D1725
marius [Sun, 8 Feb 2015 23:09:01 +0000 (23:09 +0000)]
MFC: r276377, r276714
- No longer exclude malo(4) and mwl(4), they have been fixed in r275870
(MFCed to stable/10 in r278415) and r275871 (MFCed to stable/10 in
r278416) respectively to build with PAE enabled.
- For the PAE kernel configuration file, no longer exclude devices that
are known to be 64-bit DMA clean from amd64.
marius [Sun, 8 Feb 2015 21:41:18 +0000 (21:41 +0000)]
MFC: r266744, r267712, r276351, r277043
- Add PCI ID for AMT based serial interface found on the Lenovo T61.
- add support for MosChip MCS9922... This is found on an ExpressCard.. [1]
- Add PCI ID for the Oxford Semiconductor OXPCIe952 device.
marius [Sun, 8 Feb 2015 20:44:44 +0000 (20:44 +0000)]
MFC: r276299
- Make PCI_QUIRK_MSI_INTX_BUG work by using the ID of the actual PCI device
for the lookup.
- For devices affected by PCI_QUIRK_MSI_INTX_BUG, ensure PCIM_CMD_INTxDIS
is cleared when using MSI/MSI-X.
- Employ PCI_QUIRK_MSI_INTX_BUG for BCM5714(S)/BCM5715(S)/BCM5780(S) rather
than clearing PCIM_CMD_INTxDIS unconditionally for all devices in bge(4).
jhb [Fri, 6 Feb 2015 18:41:57 +0000 (18:41 +0000)]
MFC 276065:
Explicitly treat timeouts when waiting for IBF or OBF to change state as an
error. This fixes occasional hangs in the IPMI kcs thread when using
ipmitool locally.
jhb [Fri, 6 Feb 2015 18:13:29 +0000 (18:13 +0000)]
MFC 277714:
natd(8) will work with an unconfigured interface and effectively not do
anything until the interface is assigned an address. This fixes
ipfw_nat to do the same by using an IP of INADDR_ANY instead of
aborting the nat setup if the requested interface is not yet configured.
hselasky [Thu, 5 Feb 2015 21:18:44 +0000 (21:18 +0000)]
MFC r277136:
Resolve a special case deadlock: When two or more threads are
simultaneously detaching kernel drivers on the same USB device we can
get stuck in the "usb_wait_pending_ref_locked()" function because the
conditions needed for allowing detach are not met.
While at it ensure that "flag_iserror" is only written when "priv_mtx"
is locked, which is protecting it.
hselasky [Thu, 5 Feb 2015 20:49:13 +0000 (20:49 +0000)]
MFC r277179, r277199 and r277391:
Add a kernel function to delist our kernel character devices, so that
the device name can be re-used right away in case we are destroying
the character devices in the background.
gjb [Thu, 5 Feb 2015 16:28:18 +0000 (16:28 +0000)]
Apply r278265 from head:
Security Advisory information is included on several
pages in the release notes. Rather than duplicating
the information between various files, add two new
files to include in all pages that currently display
the information.
gjb [Thu, 5 Feb 2015 14:12:05 +0000 (14:12 +0000)]
Add an entity to use to link to SAs and ENs.
Update the Security Advisories and Errata Notices
section to use the new entity.
Prefer https:// for other URLs.
gjb [Thu, 5 Feb 2015 13:07:41 +0000 (13:07 +0000)]
MFC [1] r278115, r278116:
r278115:
Move the 'Upgrading from Previous Releases of FreeBSD'
section to the top of the file, following the introduction.
r278116:
Overhaul the relnotes page to reorganize the sections.
With the previous layout, the majority of the release
notes were categorized under one main "What's New"
section, which in addition to making the page difficult
to parse relevant bits, also had a few rendering issues,
such as 'Note' blocks visually not appearing as if they
pertain to a particular change.
This change removes the "What's New" section, integrating
it with the introduction. In addition, each section now
provides a brief description of its contents, broken down
further into a subsection for each "topic", making it much
easier to find a specific topic in the page.
ken [Tue, 3 Feb 2015 22:49:12 +0000 (22:49 +0000)]
MFC isp(4) driver changes:
r276839, r276842, r277513, r277514, r277515
------------------------------------------------------------------------
r276839 | ken | 2015-01-08 10:41:28 -0700 (Thu, 08 Jan 2015) | 49 lines
Fix Fibre Channel Command Reference Number handling in the isp(4) driver.
The Command Reference Number is used for precise delivery of
commands, and is part of the FC-Tape functionality set. (This is
only enabled for devices that support precise delivery of commands.)
It is an 8-bit unsigned number that increments from 1 to 255. The
commands sent by the initiator must be processed by the target in
CRN order if the CRN is non-zero.
There are certain scenarios where the Command Reference Number
sequence needs to be reset. When the target is power cycled, for
instance, the initiator needs to reset the CRN to 1. The initiator
will know this because it will see a LIP (when directly connected)
or get a logout/login event (when connected to a switch).
The isp(4) driver was not resetting the CRN when a target
went away and came back. When it saw the target again after a
power cycle, it would continue the CRN sequence where it left off.
The target would ignore the command because the CRN sequence is
supposed to be reset to 1 after a power cycle or other similar
event.
The symptom that the user would see is that there would be lots of
aborted INQUIRY commands after a tape library was power cycled, and
the library would fail to probe. The INQUIRY commands were being
ignored by the tape drive due to the CRN issue mentioned above.
isp_freebsd.c:
Add a new function, isp_fcp_reset_crn(). This will reset
all of the CRNs for a given port, or the CRNs for all LUNs
on a target.
Reset the CRNs for all targets on a port when we get a LIP,
loop reset, or loop down event.
Reset the CRN for a particular target when it arrives, is changed
or departs. This is less precise behavior than the
clearing behavior specified in the FCP-4 spec (which says
that it should be reset for PRLI, PRLO, PLOGI and LOGO),
but this is the level of information we have here. If this
is insufficient, then we will need to add more precise
notification from the lower level isp(4) code.
isp_freebsd.h:
Add a prototype for isp_fcp_reset_crn().
Sponsored by: Spectra Logic
MFC after: 1 week
------------------------------------------------------------------------
r276842 | ken | 2015-01-08 10:51:12 -0700 (Thu, 08 Jan 2015) | 44 lines
Close a race in the isp(4) driver that caused devices to disappear
and not automatically come back if they were gone for a short
period of time.
The isp(4) driver has a 30 second gone device timer that gets
activated whenever a device goes away. If the device comes back
before the timer expires, we don't send a notification to CAM that
it has gone away. If, however, there is a command sent to the
device while it is gone and before it comes back, the isp(4) driver
sends the command back with CAM_SEL_TIMEOUT status.
CAM responds to the CAM_SEL_TIMEOUT status by removing the device.
In the case where a device comes back within the 30 second gone
device timer window, though, we weren't telling CAM the device
came back.
So, fix this by tracking whether we have told CAM the device is
gone, and if we have, send a rescan if it comes back within the 30
second window.
ispvar.h:
In the fcportdb_t structure, add a new bitfield,
reported_gone. This gets set whenever we return a command
with CAM_SEL_TIMEOUT status on a Fibre Channel device.
isp_freebsd.c:
In isp_done(), if we're sending CAM_SEL_TIMEOUT for for a
command sent to a FC device, set the reported_gone bit.
In isp_async(), in the ISPASYNC_DEV_STAYED case, rescan the
device in question if it is mapped to a target ID and has
been reported gone.
In isp_make_here(), take a port database entry argument,
and clear the reported_gone bit when we send a rescan to
CAM.
In isp_make_gone(), take a port database entry as an
argument, and set the reported_gone bit when we send an
async event telling CAM consumers that the device is gone.
Sponsored by: Spectra Logic
MFC after: 1 week
------------------------------------------------------------------------
r277514 | will | 2015-01-21 13:27:11 -0700 (Wed, 21 Jan 2015) | 18 lines
Force commit to record the correct log for r277513.
If the user sends an XPT_RESET_DEV CCB, make sure to reset the
Fibre Channel Command Reference Number if we're running on a FC
controller.
We send a SCSI Target Reset when we get this CCB, and as a result
need to reset the CRN to 1 on the next command.
isp_freebsd.c:
In the XPT_RESET_DEV implementation in isp_action(), reset
the CRN if we're on a FC controller.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112787 on 2015/01/15
------------------------------------------------------------------------
r277515 | will | 2015-01-21 13:32:36 -0700 (Wed, 21 Jan 2015) | 25 lines
Fix SCSI status byte reporting on 4Gb and 8Gb Qlogic boards.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
ken [Tue, 3 Feb 2015 22:18:48 +0000 (22:18 +0000)]
MFC r276835:
r276835 | ken | 2015-01-08 09:58:40 -0700 (Thu, 08 Jan 2015) | 91 lines
Improve camcontrol(8) handling of drive defect data.
This includes a new summary mode (-s) for camcontrol defects that
quickly tells the user the most important thing: how many defects
are in the requested list. The actual location of the defects is
less important.
Modern drives frequently have more than the 8191 defects that can
be reported by the READ DEFECT DATA (10) command. If they don't
have that many grown defects, they certainly have more than 8191
defects in the primary (i.e. factory) defect list.
The READ DEFECT DATA (12) command allows for longer parameter
lists, as well as indexing into the list of defects, and so allows
reporting many more defects.
This has been tested with HGST drives and Seagate drives, but
does not fully work with Seagate drives. Once I have a Seagate
spec I may be able to determine whether it is possible to make it
work with Seagate drives.
scsi_da.h: Add a definition for the new long block defect
format.
Add bit and mask definitions for the new extended
physical sector and bytes from index defect
formats.
Add a prototype for the new scsi_read_defects() CDB
building function.
scsi_da.c: Add a new scsi_read_defects() CDB building function.
camcontrol(8) was previously composing CDBs manually.
This is long overdue.
camcontrol.c: Revamp the camcontrol defects subcommand. We now
go through multiple stages in trying to get defect
data off the drive while avoiding various drive
firmware quirks.
We start off by requesting the defect header with
the 10 byte command. If we're in summary mode (-s)
and the drive reports fewer defects than can be
represented in the 10 byte header, we're done.
Otherwise, we know that we need to issue the
12 byte command if the drive reports the maximum
number of defects.
If we're in summary mode, we're done if we get a
good response back when asking for the 12 byte header.
If the user has asked for the full list, then we
use the address descriptor index field in the 12
byte CDB to step through the list in 64K chunks.
64K is small enough to work with most any ancient
or modern SCSI controller.
Add support for printing the new long block defect
format, as well as the extended physical sector and
bytes from index formats. I don't have any drives
that support the new formats.
Add a hexadecimal output format that can be turned
on with -X.
Add a quiet mode (-q) that can be turned on with
the summary mode (-s) to just print out a number.
Revamp the error detection and recovery code for
the defects command to work with HGST drives.
Call the new scsi_read_defects() CDB building
function instead of rolling the CDB ourselves.
Pay attention to the residual from the defect list
request when printing it out, so we don't run off
the end of the list.
Use the new scsi_nv library routines to convert
from strings to numbers and back.
camcontrol.8: Document the new defect formats (longblock, extbfi,
extphys) and command line options (-q, -s, -S and
-X) for the defects subcommand.
Explain a little more about what drives generally
do and don't support.
ken [Tue, 3 Feb 2015 21:54:59 +0000 (21:54 +0000)]
MFC 276831:
r276831 | ken | 2015-01-08 09:27:56 -0700 (Thu, 08 Jan 2015) | 30 lines
Fix a bug in the CAM SCSI probe code that caused changes in inquiry
data to go undetected.
The probe code does an MD5 checksum of the inquiry data (and page
0x80 serial number if available) before doing a reprobe of an
existing device, and then compares a checksum after the probe to
see whether the device has changed.
This check was broken in January, 2000 by change 56146 when the extended
inquiry probe code was added.
In the extended inquiry probe case, it was calculating the checksum
a second time. The second time it included the updated inquiry
data from the short inquiry probe (first 36 bytes). So it wouldn't
catch cases where the vendor, product, revision, etc. changed.
This change will have the effect that when a device's inquiry data is
updated and a rescan is issued, it will disappear and then reappear.
This is the appropriate action, because if the inquiry data or serial
number changes, it is either a different device or the device
configuration may have changed significantly. (e.g. with updated
firmware.)
scsi_xpt.c: Don't calculate the initial MD5 checksum on
standard inquiry data and the page 0x80 serial
number if we have already calculated it.
kib [Tue, 3 Feb 2015 11:54:33 +0000 (11:54 +0000)]
MFC r277794:
The sys_quotactl() contract demands that the mount point is
vfs_unbusy()ed when the cmd is Q_QUOTAON, regardless of other input
parameters or error return.
mav [Tue, 3 Feb 2015 08:06:13 +0000 (08:06 +0000)]
MFC r277419:
Allow skipping dmu_buf_will_dirty() call in dsl_dir_transfer_space().
dsl_dir_transfer_space() is mostly called after dsl_dir_diduse_space(),
which already calls dmu_buf_will_dirty() for the same dbuf and tx, so
its duplicate call in those cases will change nothing, only spend time.
Skipping this call by four times reduces time spent in dbuf_write_done()
and descendants, updating dataset statistics with several congested lock
acquisitions. When rewriting 8K zvol blocks at 1GB/s rate, this reduces
CPU time spent inside dbuf_write_done(), according to profiling, from 45%
of 683K samples to 18% of 422K.
nwhitehorn [Tue, 3 Feb 2015 00:29:58 +0000 (00:29 +0000)]
MFC r277792:
Fix bug in mapppings of multiple pages exposed by updates to the VSCSI
support in QEMU. Each page of a many page mapping was getting mapped to
the same physical address, which is not the desired behavior.
loos [Mon, 2 Feb 2015 12:48:13 +0000 (12:48 +0000)]
MFC r277042:
Add support to turn off Beaglebone with poweroff(8) or shutdown(8) -p.
To cut off the power we need to start the shutdown sequence by writing
the OFF bit on PMIC.
Once the PMIC is programmed the SoC needs to toggle the PMIC_PWR_ENABLE
pin when it is ready for the PMIC to cut off the power. This is done by
triggering the ALARM2 interrupt on SoC RTC.
The RTC driver only works in power management mode which means it won't
provide any kind of time keeping functionality. It only implements a way
to trigger the ALARM2 interrupt when requested.
loos [Mon, 2 Feb 2015 11:42:35 +0000 (11:42 +0000)]
MFC r276751:
Remove the check that prevent carp(4) advskew to be set to '0'.
CARP devices are created with advskew set to '0' and once you set it to
any other value in the valid range (0..254) you can't set it back to zero.
The code in question is also used to prevent that zeroed values overwrite
the CARP defaults when a new CARP device is created. Since advskew already
defaults to '0' for newly created devices and the new value is guaranteed
to be within the valid range, it is safe to overwrite it here.
dim [Sun, 1 Feb 2015 01:42:38 +0000 (01:42 +0000)]
MFC r273434 (by bapt):
Do not define bad_array_new_length::bad_array_new_length in libc++ anymore
when used in combinaison with libcxxrt since it is now defined there already.
This fixes building world