markj [Sat, 3 May 2014 04:44:03 +0000 (04:44 +0000)]
Allow "a.out" as an alias for the executable if no other matching entries
are found. This improves compatibility with Solaris' libproc and fixes a
number of failing DTrace tests that rely on this feature.
rmacklem [Sat, 3 May 2014 00:13:45 +0000 (00:13 +0000)]
The new draft specification for NFSv4.0 specifies that a server
should either accept owner and owner_group strings that are just
the digits of the uid/gid or return NFS4ERR_BADOWNER.
This patch adds a sysctl vfs.nfsd.enable_stringtouid, which can
be set to enable the server w.r.t. accepting numeric string. It
also ensures that NFS4ERR_BADOWNER is returned if numeric uid/gid
strings are not enabled. This fixes the server for recent Linux
nfs4 clients that use numeric uid/gid strings by default.
Reported and tested by: craigyk@gmail.com
MFC after: 2 weeks
ken [Fri, 2 May 2014 20:25:09 +0000 (20:25 +0000)]
Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
asomers [Fri, 2 May 2014 16:24:09 +0000 (16:24 +0000)]
Fix a panic caused by doing "ifconfig -am" while a lagg is being destroyed.
The thread that is destroying the lagg has already set sc->sc_psc=NULL when
the "ifconfig -am" thread gets to lacp_req(). It tries to dereference
sc->sc_psc and panics. The solution is for lacp_req() to check the value of
sc->sc_psc. If NULL, harmlessly return an lacp_opreq structure full of
zeros. Full details in GNATS.
rwatson [Fri, 2 May 2014 07:57:40 +0000 (07:57 +0000)]
Garbage collect mtxpool_lockbuilder, the mutex pool historically used
for lockmgr and sx interlocks, but unused since optimised versions of
those sleep locks were introduced. This will save a (quite) small
amount of memory in all kernel configurations. The sleep mutex pool is
retained as it is used for 'struct bio' and several other consumers.
eadler [Fri, 2 May 2014 07:14:22 +0000 (07:14 +0000)]
lindev(4): finish the partial commit in r265212
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD. /dev/full was never linux-specific and provides a generally useful
feature.
Document this in UPDATING and bump __FreeBSD_version. This will be documented
in the PH shortly.
eadler [Fri, 2 May 2014 05:30:49 +0000 (05:30 +0000)]
lindev(4): remove the device
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD. /dev/full was never linux-specific and provides a generally useful
feature.
Document this in UPDATING and bump __FreeBSD_version. This will be documented
in the PH shortly.
neel [Fri, 2 May 2014 04:51:31 +0000 (04:51 +0000)]
Don't allow MPtable generation if there are multiple PCI hierarchies. This is
because there isn't a standard way to relay this information to the guest OS.
Add a command line option "-Y" to bhyve(8) to inhibit MPtable generation.
If the virtual machine is using PCI devices on buses other than 0 then it can
still use ACPI tables to convey this information to the guest.
ian [Fri, 2 May 2014 01:28:19 +0000 (01:28 +0000)]
Honor the max-frequency property if it appears in the fdt data.
Adjust the exynos and zedboard dts files to use max-frequency (the
documented standard property) instead of clock-frequency.
Submitted by: Thomas Skibo <ThomasSkibo@sbcglobal.net>
mjg [Fri, 2 May 2014 00:52:13 +0000 (00:52 +0000)]
Ignore the error from pipespace_new when creating a pipe.
It can fail if pipe map is exhausted (as a result of too many pipes created),
but it is not fatal and could be provoked by unprivileged users. The only
consequence is worse performance with given pipe.
adrian [Fri, 2 May 2014 00:48:09 +0000 (00:48 +0000)]
Add tracking for self-generated frames when the VAP is in sleep state.
The hardware can generate its own frames (eg RTS/CTS exchanges, other
kinds of 802.11 management stuff, especially when it comes to 802.11n)
and these also have PWRMGT flags. So if the VAP is asleep but the
NIC is in force-awake for some reason, ensure that the self-generated
frames have PWRMGT set to 1.
Now, this (like basically everything to do with powersave) is still
racy - the only way to guarantee that it's all actually consistent
is to pause transmit and let it finish before transitioning the VAP
to sleep, but this at least gets the basic method of tracking and
updating the state debugged.
pfg [Thu, 1 May 2014 01:42:48 +0000 (01:42 +0000)]
citrus: Avoid invalid code points.
From the OpenBSD log:
The UTF-8 decoder should not accept byte sequences which decode to unicode
code positions U+D800 to U+DFFF (UTF-16 surrogates), U+FFFE, and U+FFFF.
grehan [Thu, 1 May 2014 00:12:24 +0000 (00:12 +0000)]
Provide an alias for the userboot console and name it 'comconsole'.
This allows existing loader.conf files that set "console=comconsole"
to work without failing. No functional difference otherwise.
Turns out this .if evaluated not in the context of the makedtb target
sometimes due to Makefile expansion rules. Make the test for things
being NULL elsewhere...
Omit "too many sections" warnings if the ELF file is not dynamically
linked (and is therefore skipped anyway), and otherwise output it only
once. An errant core file would previously cause kldxref to output a
number of warnings.
Also introduce a MAXSEGS #define and replace literal 2 with it, to make
comparisons clear.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Omit from the universe build all config files tagged with
#NO_UNIVERSE. Many of these config files are important examples, but
add little to no regresive value to the intended purpose of
UNIVERSE. We now build over 120 kernels during universe. There's
really little to no value to this over building say 60 or even 30 of
them (either is still a way too big number). This is especially true
for kernels that are nothing more than including a common base and
adding a static DTB file. Start by pruning 1/3 of the arm kernels that
add little regresion value.
Allow FDT_DTS_FILE to be a list, either in the makedtb target, or in a
kernel config file. If you also want to have a static DTB compiled
into your kernel, however, it cannot be a list. We have no mechanism
in the kernel for picking one, so that doesn't make sense and will
result in a compile-time error.
Reintroduce priority for the TRIM ZIOs instead of using the "NOW" priority
The changes how TRIM requests are generated to use ZIO_TYPE_FREE + a priority
instead of ZIO_TYPE_IOCTL, until processed by vdev_geom; only then is it
translated the required geom values. This reduces the amount of changes
required for FREE requests to be supported by the new IO scheduler. This
also eliminates the need for a specific DKIOCTRIM.
Also fixed FREE vdev child IO's from running ZIO_STAGE_VDEV_IO_DONE as part
of their schedule.
As the new IO scheduler can result in a request to execute one type of IO to
actually run a different type of IO it requires that zio_trim requests are
processed without holding the trim map lock (tm->tm_lock), as the free request
execute call may result in write request running hence triggering a
trim_map_write_start call, which takes the trim map lock and hence would result
in recused on no-recursive sx lock.
This is based off avg's original work, so credit to him.
Do not reread SCSI disk VPD pages on every device open.
Instead of rereading VPD pages on every device open, do it only on initial
device probe, and in cases when device reported via UNIT ATTENTIONs that
something has changed. Capacity is still rereaded on every open because
it is more critical for operation and more probable to change in run time.
On my tests with Intel 530 SSDs on mps(4) HBA this change reduces time
GEOM needs to retaste the device (that includes few open/close cycles)
from ~150ms to ~30ms.
adrian [Wed, 30 Apr 2014 02:19:41 +0000 (02:19 +0000)]
Bring over some initial power save management support, reset path
fixes and beacon programming / debugging into the ath(4) driver.
The basic power save tracking:
* Add some new code to track the current desired powersave state; and
* Add some reference count tracking so we know when the NIC is awake; then
* Add code in all the points where we're about to touch the hardware and
push it to force-wake.
Then, how things are moved into power save:
* Only move into network-sleep during a RUN->SLEEP transition;
* Force wake the hardware up everywhere that we're about to touch
the hardware.
The net80211 stack takes care of doing RUN<->SLEEP<->(other) state
transitions so we don't have to do it in the driver.
Next, when to wake things up:
* In short - everywhere we touch the hardware.
* The hardware will take care of staying awake if things are queued
in the transmit queue(s); it'll then transit down to sleep if
there's nothing left. This way we don't have to track the
software / hardware transmit queue(s) and keep the hardware
awake for those.
Then, some transmit path fixes that aren't related but useful:
* Force EAPOL frames to go out at the lowest rate. This improves
reliability during the encryption handshake after 802.11
negotiation.
Next, some reset path fixes!
* Fix the overlap between reset and transmit pause so we don't
transmit frames during a reset.
* Some noisy environments will end up taking a lot longer to reset
than normal, so extend the reset period and drop the raise the
reset interval to be more realistic and give the hardware some
time to finish calibration.
* Skip calibration during the reset path. Tsk!
Then, beacon fixes in station mode!
* Add a _lot_ more debugging in the station beacon reset path.
This is all quite fluid right now.
* Modify the STA beacon programming code to try and take
the TU gap between desired TSF and the target TU into
account. (Lifted from QCA.)
adrian [Wed, 30 Apr 2014 02:03:13 +0000 (02:03 +0000)]
* Only update ah_powerMode if we're setting the chip sleep state.
Some code will appear soon that is actually setting the chip powerstate
separate from the self-generated frames power state.
* Allow the AR5416 family chips to actually have the power state changed
from the self generated state change.
Move rt_setmetrics() from rtsock.c to route.c.
All rtsock-initiated rte creation/modification are now
performed in route.c holding radix tree write lock.
This reduces the need for per-rte mutex.
Some Linux guests will implement a 'halt' by disabling the APIC and executing
the 'HLT' instruction. This condition was detected by 'vm_handle_hlt()' and
converted into the SPINDOWN_CPU exitcode . The bhyve(8) process would exit
the vcpu thread in response to a SPINDOWN_CPU and when the last vcpu was
spun down it would reset the virtual machine via vm_suspend(VM_SUSPEND_RESET).
This functionality was broken in r263780 in a way that made it impossible
to kill the bhyve(8) process because it would loop forever in
vm_handle_suspend().
Unbreak this by removing the code to spindown vcpus. Thus a 'halt' from
a Linux guest will appear to be hung but this is consistent with the
behavior on bare metal. The guest can be rebooted by using the bhyvectl
options '--force-reset' or '--force-poweroff'.
For the VM_PHYSSEG_DENSE case, checking the requested range to fall
into the area backed by vm_page_array wrongly compared end with
vm_page_array_size. It should be adjusted by first_page index to be
correct.
Also, the corner and incorrect case of the requested range extending
after the end of the vm_page_array was incorrectly handled by
allocating the segment.
Fix the comparision for the end of range and return EINVAL if the end
extends beyond vm_page_array.
Discussed with: royger
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Exit with an error when make is called without a target at the top level
rather than poluting the source tree and causing use confusion in future
builds.
Fix "netstat -gW" behavior broken in r259638.
netstat has two options for printing multicast tables:
sysctl (the default one for live systems) and kvm-based one (for cores).
It looks like kvm-based one hasn't been working since it's been introduced
in r190012 due to absence of mfctablesize kernel symbol.
Check for all ipv4-multicast symbols being correctly resolved was introduced
in r259638 regardless of 'live' value leading to "No IPv4 MROUTING" error
message.
From the OpenBSD log:
The UTF-8 decoder should not accept byte sequences which decode to unicode
code positions U+D800 to U+DFFF (UTF-16 surrogates), U+FFFE, and U+FFFF.
Fix a panic when removing an IP address from an interface, if the same address
exists on another interface. The panic was introduced by change 264887, which
changed the fibnum parameter in the call to rtalloc1_fib() in
ifa_switch_loopback_route() from RT_DEFAULT_FIB to RT_ALL_FIBS. The solution
is to use the interface fib in that call. For the majority of users, that will
be equivalent to the legacy behavior.
After r264897 restore the ability to add bootoptions from FDT for
platforms which do not use loaders or kernels that want to hardcode
options or for FDT passed in by loader.
Also fix a build issue by putting the kmdp variable accessed back under
the #ifdef FDT; we may wish to revisit decision in which case more
code needs changing.