Add a new module, pam_opieaccess(8), which is responsible for checking
/etc/opieaccess and ~/.opiealways so we can decide what to do after
pam_opie(8) fails.
Sponsored by: DARPA, NAI Labs
Reviewed by: ache, markm
Josef Karthauser [Mon, 21 Jan 2002 05:02:21 +0000 (05:02 +0000)]
Merge from NetBSD:
ohci.c: -r1.69 to 1.71
ohcireg.h: -r1.14
Some of these deltas are based upon patches that we submitted back to
NetBSD. They got manifested slightly differently though, so I've brought
back those differences to bring our code bases closer together.
The logs from the NetBSD version of ohci.c:
revision 1.71
date: 2000/02/01 05:42:52; author: augustss; state: Exp; lines: +13 -2
Put some #ifdefs around power and shutdown hooks.
----------------------------
revision 1.70
date: 2000/01/31 22:35:13; author: augustss; state: Exp; lines: +7 -7
Rename TAILMASK to HEADMASK, since it really masks the head pointer.
From FreeBSD.
----------------------------
revision 1.69
date: 2000/01/31 22:09:13; author: augustss; state: Exp; lines: +18 -14
Change where the has table for physical-to-virtual address translation
is handled. Partly from FreeBSD.
Josef Karthauser [Mon, 21 Jan 2002 04:24:33 +0000 (04:24 +0000)]
Merge from NetBSD:
ohci.c: -r1.68
ohcireg.h: -r1.13
date: 2000/01/31 20:17:25; author: augustss; state: Exp;
Fiddle with over-current protect when turning on port power to make
things work for some OHCI controllers.
Maxim Sobolev [Mon, 21 Jan 2002 01:16:11 +0000 (01:16 +0000)]
Allow dump device be configured as early as possible using loader(8) tunable.
This allows obtaining crash dumps from the panics occured during late stages
of kernel initialisation before system enters into single-user mode.
Josef Karthauser [Sun, 20 Jan 2002 23:48:43 +0000 (23:48 +0000)]
Merge from NetBSD:
revision 1.125
date: 2000/09/23 21:00:10; author: augustss; state: Exp; lines: +19 -3
Avoid "bandwidth reclamation" for control transfers. The kue device chokes
on it.
Josef Karthauser [Sun, 20 Jan 2002 23:38:33 +0000 (23:38 +0000)]
Merge from NetBSD:
uhci.c: -r1.124
uhcireg.h: -r1.13
date: 2000/08/13 18:20:14; author: augustss; state: Exp;
Fix race condition when unlinking xfers. Thanks to IWAMOTO Toshihiro
<iwamoto@sat.t.u-tokyo.ac.jp> for analyzing the problem and suggesting a fix.
Fixes PR 10662.
Josef Karthauser [Sun, 20 Jan 2002 20:12:25 +0000 (20:12 +0000)]
Merge from NetBSD:
uhci.c: -r1.123 (and a tiny bit of -r1.92)
uhcivar.h: -r1.32
date: 2000/08/13 16:18:09; author: augustss; state: Exp;
Implement what in Intel-speech is known as "bandwidth
reclamation". It means that we continously poll USB devices
that have a pending transfer instead of polling just once
every ms. This speeds up some transfers at the expense of
using more PCI bandwidth.
Mike Smith [Sun, 20 Jan 2002 08:51:08 +0000 (08:51 +0000)]
Add the 'iir' driver, for the Intel Integrated RAID controllers and
prior ICP Vortex models. This driver was developed by Achim Leubner
of Intel (previously with ICP Vortex) and Boji Kannanthanam of Intel.
Submitted by: "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com>
MFC after: 2 weeks
Mike Smith [Sun, 20 Jan 2002 06:21:33 +0000 (06:21 +0000)]
ICP have been acquired by Intel, and their driver is now the Intel
Integrated RAID driver, supported by <boji.t.kannanthanam@intel.com> and
<achim.leubner@intel.com>.
Submitted by: "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com>
Warner Losh [Sun, 20 Jan 2002 03:28:29 +0000 (03:28 +0000)]
The Libretto L series has no $PIR table, but does have a _PIR table.
This typo keeps us from properly routing an interrupt for CardBus
bridges on this machine. So, now we look for $PIR and then _PIR to
cope. With these changes, the Libretto L1 now works properly.
Evidentally, the idea comes from patch that the Japanese version of
RedHat (or against a Japanese version of Red Hat), but my Japanese
isn't good enough to to know for sure.
Reported by: Hiroyuki Aizu-san <eyes@navi.org>
# This may be an MFC candidate, but I'm not yet sure.
Alan Cox [Sun, 20 Jan 2002 00:52:44 +0000 (00:52 +0000)]
o Revision 1.99 ("KSE Milestone 2") left the aio daemons
sleeping on a process object but changed the corresponding
wakeup()s to the thread object. The result was that non-raw
aio ops waited for an aio daemon to timeout before action
was taken. Now, we sleep on the thread object.
Matthew Dillon [Sat, 19 Jan 2002 23:20:02 +0000 (23:20 +0000)]
I've been meaning to do this for a while. Add an underscore to the
time_to_xxx() and xxx_to_time() functions. e.g. _time_to_xxx()
instead of time_to_xxx(), to make it more obvious that these are
stopgap functions & placemarkers and not meant to create a defacto
standard. They will eventually be replaced when a real standard
comes out of committee.
If user not exist in OPIE system, return failure immediately instead
of producing fake prompts with random numbers which can be detected by
potential intruder in two tries and totally confuse non-OPIE users.
Matthew Dillon [Sat, 19 Jan 2002 02:14:45 +0000 (02:14 +0000)]
Remove 'VXLOCK: interlock avoided' warnings. This can now occur in normal
operation. The vgonel() code has always called vclean() but until we
started proactively freeing vnodes it would never actually be called with
a dirty vnode, so this situation did not occur prior to the vnlru() code.
Now that we proactively free vnodes when kern.maxvnodes is hit, however,
vclean() winds up with work to do and improperly generates the warnings.
Reviewed by: peter
Approved by: re (for MFC)
MFC after: 1 day
Joerg Wunsch [Fri, 18 Jan 2002 22:17:35 +0000 (22:17 +0000)]
Well, RELEASE_BUILD_FIXIT has now been renamed into RELEASE_CRUNCH.
At least, the old version is still good for the MFC though (where
everything is still going the old way). ;-)
Ian Dowse [Fri, 18 Jan 2002 21:54:02 +0000 (21:54 +0000)]
Cut more than 500 bytes off the size of the alpha boot1 by adding
a simple version of bcopy() so we avoid picking up the overly-complex
implementation in libc (via libstand). This is not necessary on
-current, but RELENG_4 has apparently just exceeded the 15-sector
limit for boot1.
Kenneth D. Merry [Fri, 18 Jan 2002 18:00:00 +0000 (18:00 +0000)]
Add 'camcontrol rescan all' and 'camcontrol reset all' functionality to
camcontrol.
This enables rescanning all busses or resetting all busses in a system.
The current implementation is not the ideal way to do it -- the ideal way
to do it would be for the transport layer to handle wildcarded busses on
bus rescan and reset operations. The current implementation enumerates all
the busses and sends a rescan or reset CCB individually. Handling this
behavior in the transport layer will happen later.
Ruslan Ermilov [Fri, 18 Jan 2002 15:25:01 +0000 (15:25 +0000)]
From ChangeLog:
: 2002-01-17 Ruslan Ermilov <ru@FreeBSD.org>
:
: * tmac/doc.common: Initialize %I register for the %I macro to
: avoid (harmless) warning.
: * tmac/doc.tmac (Bd): There is no reason to enforce -compact
: when in the SYNOPSIS section.
Ruslan Ermilov [Fri, 18 Jan 2002 14:33:04 +0000 (14:33 +0000)]
Introduce an interface announcement message for the routing
socket so that routing daemons and other interested parties
know when an interface is attached/detached.
Marcel Moolenaar [Fri, 18 Jan 2002 07:55:23 +0000 (07:55 +0000)]
Add a definition of ddb_regs. ddb_regs is declared as extern in
db_machdep.h to fix the link failure (multiple definitions)
caused by disabling the emission of common symbols. As a result,
there were no definitions at all. While here, remove useless
declarations.