Marius Strobl [Mon, 4 Jun 2012 20:45:33 +0000 (20:45 +0000)]
The workaround added in r151650 for handling firmwares that don't allow
a single device to be opened multiple times concurrently unfortunately
isn't sufficient with ZFS. This is due to the fact, that ZFS may open
different partitions of a single device simultaneously. So the best we
can do in this case is to cache the lastly used device path and close
and open devices in ofwd_strategy() as needed.
PR: 165025
Submitted by: Gavin Mu
MFC after: 1 week
Dimitry Andric [Mon, 4 Jun 2012 20:36:11 +0000 (20:36 +0000)]
Fix build of aicasm when CC=clang. This was due to a side-effect of the
EARLY_BUILD macro: the -Qunused-arguments flag isn't passed anymore when
building this particular program. However, with clang 3.1 and -Werror,
such unused argument warnings are flagged as errors, causing buildkernel
to fail at this stage, due to the -nostdinc flag passed during linking.
Since the -nostdinc flag isn't actually needed, just remove it.
Xin LI [Mon, 4 Jun 2012 18:02:09 +0000 (18:02 +0000)]
Replace the use of wall clock time with monotonically increasing
clock. In general, gettimeofday() is not appropriate interface
when accounting for elasped time because it can go backward, in
which case the policy code could errornously consider the limit
as exceeded.
MFC after: 1 week
Reported by: Mahesh Arumugam
Submitted by: Dorr H. Clark via gnn
Sponsored by: Citrix / NetScaler
Zachary Loafman [Mon, 4 Jun 2012 16:04:01 +0000 (16:04 +0000)]
Fix DTrace TSC skew calculation:
The skew calculation here is exactly backwards. We were able to repro
it on a multi-package ESX server running a FreeBSD VM, where the TSCs
can be pretty evil.
MFC after: 1 week
Submitted by: Jeff Ford <jeffrey.ford2@isilon.com>
Reviewed by: avg, gnn
Gleb Smirnoff [Mon, 4 Jun 2012 12:49:21 +0000 (12:49 +0000)]
Optimise kern_sendfile(): skip cycling through the entire mbuf chain in
m_cat(), storing pointer to last mbuf in chain in local variable and
attaching new mbuf to the end of chain.
Submitter reports that CPU load dropped for > 10% on a web server
serving large files with this optimisation.
Warner Losh [Mon, 4 Jun 2012 04:24:59 +0000 (04:24 +0000)]
Eliminate the now-unused AT91C_MASTER_CLOCK option and change the one
place in the source it was used to the more correct AT91C_MAIN_CLOCK.
Sort AT91C_MAIN_CLOCK into a better location in the options.arm file.
Alan Cox [Mon, 4 Jun 2012 03:51:08 +0000 (03:51 +0000)]
Various small changes to PV entry management:
Constify pc_freemask[].
pmap_pv_reclaim()
Eliminate "freemask" because it was a pessimization. Add a comment about
the resident count adjustment.
free_pv_entry() [i386 only]
Merge an optimization from amd64 (r233954).
get_pv_entry()
Eliminate the move to tail of the pv_chunk on the global pv_chunks list.
(The right strategy needs more thought. Moreover, there were unintended
differences between the amd64 and i386 implementation.)
Dimitry Andric [Sun, 3 Jun 2012 20:35:41 +0000 (20:35 +0000)]
During buildworld and buildkernel, define EARLY_BUILD in the earlier
stages (build-tools, cross-tools, etc) of the build, so we can detect in
bsd.*.mk whether to pass compiler-specific flags to ${CC}.
In particular, this commit will allow using WITH_CLANG_IS_CC when the
base compiler is still gcc, and when ${CC}, ${CXX} and ${CPP} are left
at their defaults. The early stages will then be built using gcc, and
no clang-specific flags will be passed to it. The later stages will be
built as usual.
The EARLY_BUILD define can also serve other uses, such as building the
world stage C++ executables with libc++ instead of libstdc++: during the
early build stages, we cannot assume libc++ is already available, so we
must still build with libstdc++ at that time.
Warner Losh [Sun, 3 Jun 2012 18:34:32 +0000 (18:34 +0000)]
Minor rearrangement of the locore <-> initarm interface. Pass in a
structure with the first 4 registers to allow a wider range of boot
loaders to work. Future commits will make use of this to centralize
support for the different loaders.
Andriy Gapon [Sun, 3 Jun 2012 08:30:00 +0000 (08:30 +0000)]
cpucontrol: use CPUCTL_UPDATE ioctl on correct file descriptor
I guess that means that microcode update has never worked for AMD CPUs.
Please also note that only older AMD CPUs and micrcode file format are
supported anyway (pre 10h family).
Interface routes are refcounted as packets move through the stack,
and there's garbage collection tied to it so that route changes can
safely propagate while traffic is flowing. In our setup, we weren't
changing or deleting any routes, but the refcounting logic in
ip6_input() was wrong and caused a reference leak on every inbound
V6 packet. This eventually caused a 32bit overflow, and the resulting
0 value caused the garbage collection to run on the active route.
That then snowballed into the panic.
Marius Strobl [Sun, 3 Jun 2012 01:07:55 +0000 (01:07 +0000)]
- Now that the DataFlash related drivers work properly (at91_spi(4) since
r236495 and at45d(4) since r236496), enable them by default.
- Sort BOOTP options.
Marius Strobl [Sun, 3 Jun 2012 01:00:55 +0000 (01:00 +0000)]
- Loop up to 3 seconds when waiting for a device to get ready. [1]
- Make the device description match the driver name.
- Identify the chip variant based on the JEDEC and use that information
to use the proper values for page count, offset and size instead of
hardcoding a AT45DB642x with 2^N byte page support disabled.
- Take advantage of bioq_takefirst().
- Given that CONTINUOUS_ARRAY_READ_HF (0x0b) command isn't even mentioned
in Atmel's DataFlash Application Note, as suggested by the previous
comment may not work on all all devices and actually doesn't properly
on at least AT45DB321D (JEDEC 0x1f2701), rewrite at45d_task() to use
CONTINUOUS_ARRAY_READ (0xe8) for reading instead. This rewrite is laid
out in a way allowing to easily add support for BIO_DELETE later on.
- Add support for reads and writes not starting on a page boundary.
- Verify the flash content after writing.
- Let at45d_task() gracefully handle errors on SPI transfers and the
device not becoming ready afterwards again. [1]
- Use DEVMETHOD_END. [1]
- Use NULL instead of 0 for pointers. [1]
Marius Strobl [Sun, 3 Jun 2012 00:54:10 +0000 (00:54 +0000)]
- Prepend the device description with "AT91" to reflect its nature. [1]
- Move DMA tag and map creature to at91_spi_activate() where the other
resource allocation also lives. [1]
- Flesh out at91_spi_deactivate(). [1]
- Work around the "Software Reset must be Written Twice" erratum.
- For now, run the bus at the slowest speed possible in order to work
around data corruption on transit even seen with 9 MHz on ETHERNUT5
(15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as
a poor man's work-around for the "NPCSx rises if no data data is to be
transmitted" erratum of RM9200. Being able to use the appropriate bus
speed would require:
1) Adding a proper work-around for the RM9200 bug consisting of taking
the chip select control away from the SPI peripheral and managing it
directly as a GPIO line.
2) Taking the maximum frequencies supported by the actual board and the
slave devices into account and basing the whole thing on the master
clock instead of hardcoding a divisor as previously done.
3) Fixing the above mentioned data corruption.
- KASSERT that TX/RX command and data sizes match on transfers.
- Introduce a mutex ensuring that only one child device is running a SPI
transfer at a time. [1]
- Add preliminary, #ifdef'ed out support for setting the chip select. [1]
- Use the RX instead of the TX commando size when setting up the RX side
of a transfer.
- For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the
completion of the TX part of transfers before stopping the whole thing
again.
- Use DEVMETHOD_END. [1]
- Use NULL instead of 0 for pointers. [1, partially]
Use plain store for atomic_store_rel on x86, instead of implicitly
locked xchg instruction. IA32 memory model guarantees that store has
release semantic, since stores cannot pass loads or stores.
Dimitry Andric [Sat, 2 Jun 2012 11:07:19 +0000 (11:07 +0000)]
Install libcxxrt's C++ ABI and unwind headers. This is done in libc++'s
Makefile, so these headers go into the same destination directory as
libc++'s own headers, currently /usr/include/c++/v1.
Ed Schouten [Sat, 2 Jun 2012 10:50:25 +0000 (10:50 +0000)]
Remove invalid remark about pipes.
The stat structures returned on pipes seems to contain all the
information required by POSIX. Especially the wording "and thus to a
pipe" makes little sense, because it seems to imply a certain
relationship between sockets and pipes that simply isn't there.
Alexander Motin [Sat, 2 Jun 2012 08:29:07 +0000 (08:29 +0000)]
Rewrite enabling NCQ for SATA devices in a way more alike to SCSI TCQ.
This allows to control it with `camcontrol negotiate adaX -T (en|dis)able`
on the fly, same as for SCSI devices.
Matt Jacob [Fri, 1 Jun 2012 23:29:48 +0000 (23:29 +0000)]
Clean up and complete the incomplete deferred enable code.
Make the default role NONE if target mode is selected. This
allows ctl(8) to switch to/from target mode via knob settings.
If we default to role 'none', this causes a reset of the
24XX f/w which then causes initiators to wake up and notice
when we come online.
John Baldwin [Fri, 1 Jun 2012 18:33:40 +0000 (18:33 +0000)]
Add a new -e flag to pciconf(8)'s list mode to display PCI error details.
Currently this dumps the status of any error bits in the PCI status register
and PCI-express device status register. It also lists any errors indicated
by version 1 of PCI-express Advanced Error Reporting (AER).
John Baldwin [Fri, 1 Jun 2012 15:52:41 +0000 (15:52 +0000)]
Commit a portion of 233708 I missed earlier and don't include the
definition of igb_start() and igb_start_locked() (nor set if_start in
the ifnet) when igb(4) uses if_transmit.
John Baldwin [Fri, 1 Jun 2012 15:42:37 +0000 (15:42 +0000)]
Extend VERBOSE_SYSINIT to also print out the name of variables passed
to SYSINIT routines if they can be resolved via symbol look up in DDB.
To avoid false positives, only honor a name if the symbol resolves
exactly to the pointer value (no offset).
Mitsuru IWASAKI [Fri, 1 Jun 2012 15:26:32 +0000 (15:26 +0000)]
Call AcpiLeaveSleepStatePrep() in interrupt disabled context
(described in ACPICA source code).
- Move intr_disable() and intr_restore() from acpi_wakeup.c to acpi.c
and call AcpiLeaveSleepStatePrep() in interrupt disabled context.
- Add acpi_wakeup_machdep() to execute wakeup MD procedures and call
it twice in interrupt disabled/enabled context (ia64 version is
just dummy).
- Rename wakeup_cpus variable in acpi_sleep_machdep() to suspcpus in
order to be shared by acpi_sleep_machdep() and acpi_wakeup_machdep().
- Move identity mapping related code to acpi_install_wakeup_handler()
(i386 version) for preparation of x86/acpica/acpi_wakeup.c
(MFC candidate).
Alan Cox [Fri, 1 Jun 2012 03:56:12 +0000 (03:56 +0000)]
pmap_alloc_vhpt() doesn't need the pages that it allocates to be mapped
into the kernel map, so vm_page_alloc_contig() can be used in place of
contigmalloc().
Warner Losh [Fri, 1 Jun 2012 02:55:42 +0000 (02:55 +0000)]
Initialize the clocks before we call cninit() so that the serial
console so initialized will work upon return from cninit. While this
is the very next line, other platforms setup all this stuff before
calling cninit. Also, initialize the SDRAM base register in the inner
block in at91_ramsize().
Tom Judge [Thu, 31 May 2012 19:33:51 +0000 (19:33 +0000)]
- Fix my botched merge and correct mentor ordering. (Spotted by flo)
- Fix missing new line in node block. (Spotted by gavin)
- Sort the node list while I'm here.