Enji Cooper [Sat, 25 Oct 2014 04:52:48 +0000 (04:52 +0000)]
- Print out "Bail out!" in die(..) so prove terminates immediately
- Handle the output from newer versions of openssl md5, similar to what
pjd@ did in r248304
Fix cpsw_detach() to not panic when called from cpsw_attach().
For an unkown reason (at moment), sometimes if_cpsw cannot read from PHY
and fails to attach calling cpsw_detach() which end up in a panic.
Fix it by doing the proper check before detach the miibus and also fix the
leak of few variables.
And to actually make it work, ether_ifattach() has to be moved to the end
of cpsw_attach() to avoid a race where calling ether_ifdetach() before
domain_init() (which will only run later on) would make it crash at
INP_INFO_RLOCK() on in_pcbpurgeif0().
Mark Johnston [Fri, 24 Oct 2014 20:29:14 +0000 (20:29 +0000)]
Eliminate conf_lock and instead rely on the NSS write lock to protect
NSS configuration state.
As a side effect, this fixes a race condition which can occur if multiple
threads call nsdispatch(3) concurrently before nsswitch.conf has been
parsed. Previously, the thread holding conf_lock could cause other threads
to return from nss_configure() before nsswitch.conf had been parsed, forcing
them to fall back to the default sources for their NSS methods.
John Baldwin [Fri, 24 Oct 2014 20:02:44 +0000 (20:02 +0000)]
The current POSIX semaphore implementation stores the _has_waiters flag
in a separate word from the _count. This does not permit both items to
be updated atomically in a portable manner. As a result, sem_post()
must always perform a system call to safely clear _has_waiters.
This change removes the _has_waiters field and instead uses the high bit
of _count as the _has_waiters flag. A new umtx object type (_usem2) and
two new umtx operations are added (SEM_WAIT2 and SEM_WAKE2) to implement
these semantics. The older operations are still supported under the
COMPAT_FREEBSD9/10 options. The POSIX semaphore API in libc has
been updated to use the new implementation. Note that the new
implementation is not compatible with the previous implementation.
However, this only affects static binaries (which cannot be helped by
symbol versioning). Binaries using a dynamic libc will continue to work
fine. SEM_MAGIC has been bumped so that mismatched binaries will error
rather than corrupting a shared semaphore. In addition, a padding field
has been added to sem_t so that it remains the same size.
John Baldwin [Fri, 24 Oct 2014 19:58:24 +0000 (19:58 +0000)]
Add COMPAT_FREEBSD9 and COMPAT_FREEBSD10 options to wrap code that
provides compatability for FreeBSD 9.x and 10.x binaries. Enable
these options in kernel configs that enable other COMPAT_FREEBSD<n>
options.
Fix a bug where DMA maps created with bus_dmamap_create() won't increment
the map count and without being able to keep track of the current map
allocation, bus_dma_tag_destroy() will fail to proceed and will return
EBUSY even after all the maps have been correctly destroyed with
bus_dmamap_destroy().
Found while testing the detach method of a NIC.
Tested on: BBB (am335x)
Reviewed by: cognet, ian
MFC after: 1 week
Rui Paulo [Fri, 24 Oct 2014 18:39:15 +0000 (18:39 +0000)]
HPET: create /dev/hpetN as a way to access HPET from userland.
In some cases, TSC is broken and special applications might benefit
from memory mapping HPET and reading the registers to count time.
Most often the main HPET counter is 32-bit only[1], so this only gives
the application a 300 second window based on the default HPET
interval.
Other applications, such as Intel's DPDK, expect /dev/hpet to be
present and use it to count time as well.
Although we have an almost userland version of gettimeofday() which
uses rdtsc in userland, it's not always possible to use it, depending
on how broken the multi-socket hardware is.
Install the acpi_hpet.h so that applications can use the HPET register
definitions.
[1] I haven't found a system where HPET's main counter uses more than
32 bit. There seems to be a discrepancy in the Intel documentation
(claiming it's a 64-bit counter) and the actual implementation (a
32-bit counter in a 64-bit memory area).
Enji Cooper [Fri, 24 Oct 2014 16:18:16 +0000 (16:18 +0000)]
- Add sys/types.h for the APIs in sys/sysctl.h
- Poke at VM_MIN_ADDRESS in machine/vmparam.h because FreeBSD doesn't have a
vm.minaddress sysctl analog
- Expect ENOMEM instead of EAGAIN in mlock_limits
- Provide mlock an mmap'ed page twice to simulate MAP_WIRED on NetBSD
Enji Cooper [Fri, 24 Oct 2014 16:07:31 +0000 (16:07 +0000)]
Correct my previous commit:
- getrusage_utime_back succeeds reliably on FreeBSD
- getrusage_utime_zero passes/fails in a seemingly non-deterministic manner.
Skip it for now (and fix it later)
In the initial port of this testcase to FreeBSD, the results failed reliably
in the same manner as it does on NetBSD
Roger Pau Monné [Fri, 24 Oct 2014 09:48:58 +0000 (09:48 +0000)]
amd64: make uiomove_fromphys functional for pages not mapped by the DMAP
Place the code introduced in r268660 into a separate function that can be
called from uiomove_fromphys. Instead of pre-allocating two KVA pages use
vmem_alloc to allocate them on demand when needed. This prevents blocking if
a page fault is taken while physical addresses from outside the DMAP are
used, since the lock is now removed.
Also introduce a safety catch in PHYS_TO_DMAP and DMAP_TO_PHYS.
amd64/amd64/pmap.c:
- Factor out the code to deal with non DMAP addresses from pmap_copy_pages
and place it in pmap_map_io_transient.
- Change the code to use vmem_alloc instead of a set of pre-allocated
pages.
- Use pmap_qenter and don't pin the thread if there can be page faults.
amd64/amd64/uio_machdep.c:
- Use pmap_map_io_transient in order to correctly deal with physical
addresses not covered by the DMAP.
amd64/include/pmap.h:
- Add the prototypes for the new functions.
amd64/include/vmparam.h:
- Add safety catches to make sure PHYS_TO_DMAP and DMAP_TO_PHYS are only
used with addresses covered by the DMAP.
Enji Cooper [Fri, 24 Oct 2014 03:53:49 +0000 (03:53 +0000)]
- Test for EINVAL requirement when passing an invalid flag in to msync(2)
- Expect ENOMEM instead of EFAULT when msync'ing a previously munmap'ed region
on FreeBSD
Enji Cooper [Fri, 24 Oct 2014 03:42:37 +0000 (03:42 +0000)]
- Ignore EINVAL check with mknod(path, S_IFCHR, -1) as the testcase is always
executed on a non-devfs filesystem
- Expect mknod(path, S_IFREG, 0) to fail on FreeBSD
Justin Hibbits [Fri, 24 Oct 2014 03:33:01 +0000 (03:33 +0000)]
Three updates to PowerPC FBT:
* Use a constant to define the number of stack frames in a probe exception.
* Only allow function symbols in powerpc64 ('.' prefixed)
* Set the fbtp_roffset for return probes, so the correct dtrace_probe call is
made.
In all cases except CTLTYPE_STRING, penv is NULL here, so passing it
indiscriminately to printf() and freeenv() is incorrect. Add a NULL
check before freeenv(); as for printf(), we could use req.newptr
instead, but we'd have to select the correct format string based on
the type, and that's too much work for an error message, so just
remove it.
Marcel Moolenaar [Thu, 23 Oct 2014 22:33:27 +0000 (22:33 +0000)]
Add generated headers xoversion.h and xoconfig.h. These are the result
of configuring the source tree:
% automake --add-missing
% autoconf
% ./configure
Ian Lepore [Thu, 23 Oct 2014 22:21:22 +0000 (22:21 +0000)]
Install a temporary workaround to avoid problems in fdt data with linux's
workaround for an imx6 chip erratum. Linux works around the bug with
changes in fdt data that we can't currently handle, so to enable running
with standard vendor-supplied fdt data, this watches for an attempt to map
the gpio1_6 interrupt and remaps it back to the standard ethernet interrupt.
This can be undone when the intrng project is completed and our gpio drivers
can also be interrupt controllers.
Alan Cox [Thu, 23 Oct 2014 21:02:40 +0000 (21:02 +0000)]
Under PAE ULONG is insufficient for representing the physical memory size. Use QUAD
for "hw.physmem" so that a physical memory size greater than 4 GB can be specified
from the boot loader.
Move if_get_counter initialization from if_attach into if_alloc.
Also, initialize all counters before ifnet will become available in the system.
This fixes possible access to uninitialized ifned fields.
Fix a bug where some DTS layouts could cause the premature ending of the
search (i.e. without returning any result) and you would end up with a
random MAC address.
Change the search algorithm to a recursive one to ensure that all the nodes
on DTS will be verified.
The previous algorithm could not keep up if the DTS has too many sub-nodes.
Enji Cooper [Thu, 23 Oct 2014 08:05:03 +0000 (08:05 +0000)]
- Omit setrlimit_nthr testcase on FreeBSD (requires lwp.h, et al)
- Expect overflow with rlim_max at INT64_MAX, not UINT64_MAX (rlim_t is int64_t
on FreeBSD)
Enji Cooper [Thu, 23 Oct 2014 06:18:28 +0000 (06:18 +0000)]
Port t_pipe2.c to FreeBSD
- Omit the pipe2_nosigpipe testcase on FreeBSD (FreeBSD doesn't have
O_NOSIGPIPE).
- Convert "fcntl(n, F_CLOSEM)" to "closefrom(n)".
- Save and restore the resource limit on the number of files (RLIMIT_NOFILE).
Ian Lepore [Thu, 23 Oct 2014 03:13:14 +0000 (03:13 +0000)]
Unconditionally enable the clocks for all imx6 devices that we have drivers
for, or that are required to run the chip (such as busses). Turn off all
the devices we don't yet have drivers for.
Some day we will have a fully functional imx6 clock driver so that we can
manage clocks based on fdt data. This will have to do until then.
Colin Percival [Wed, 22 Oct 2014 23:41:15 +0000 (23:41 +0000)]
Populate the GELI passphrase cache with the kern.geom.eli.passphrase
variable (if any) provided in the boot environment. Unset it from
the kernel environment after doing this, so that the passphrase is
no longer present in kernel memory once we enter userland.
This will make it possible to provide a GELI passphrase via the boot
loader; FreeBSD's loader does not yet do this, but GRUB (and PCBSD)
will have support for this soon.
Mark Johnston [Wed, 22 Oct 2014 23:35:56 +0000 (23:35 +0000)]
Fix some buglets in the error-handling of getdevice(). In particular, report
an error if the argument to pciconf -a doesn't have a unit number, rather
than triggering an assertion failure.
Colin Percival [Wed, 22 Oct 2014 23:35:32 +0000 (23:35 +0000)]
Avoid leaking data from the kernel environment: When we convert the
initial static environment to a dynamic one, zero the static environment
buffer, and zero individual values when kern_unsetenv and freeenv are
called.
Rick Macklem [Wed, 22 Oct 2014 22:27:51 +0000 (22:27 +0000)]
Clip the settings for the NFS rsize, wsize mount options
to a power of 2. For non-power of 2 settings, intermittent
page faults have been reported. Although the bug that causes
these page faults/crashes has not been identified, it does
not appear to occur when rsize, wsize is a power of 2.
Enji Cooper [Wed, 22 Oct 2014 21:04:54 +0000 (21:04 +0000)]
The NetBSD libc tests use several definitions/macros that aren't available in
FreeBSD
Add the missing compat definitions/macros to lib/libnetbsd so the testcases
can be compiled with libnetbsd without having to invent ad hoc #define's, or
having to convert things over to FreeBSD idioms
Rick Macklem [Wed, 22 Oct 2014 20:47:11 +0000 (20:47 +0000)]
Clip the settings for the NFS rsize, wsize mount options
to a power of 2. For non-power of 2 settings, intermittent
page faults have been reported. Although the bug that causes
these page faults/crashes has not been identified, it does
not appear to occur when rsize, wsize is a power of 2.