]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/shortlog
FreeBSD/FreeBSD.git
2019-05-09 Michael TuexenDon't use C++ style comments.
2019-05-09 Mateusz Piotrowskinfsd.8: Fix mandoc -Tlint and igor warnings
2019-05-09 Kyle Evanstuntap: Don't down tap interfaces if LINK0 is set
2019-05-09 Andrey V. ElsukovAdd if_ipsec.ko symlink to ipsec.ko kernel module.
2019-05-09 Kyle Evanstuntap: Properly detach tap ifp
2019-05-09 Toomas Soomeloader: use DPRINTF in biosdisk.c and define safe DPRINTF
2019-05-09 Kyle Evansifconfig(8): Partial revert of r347241
2019-05-09 Toomas Soomeloader: no-TERM_EMU is broken now
2019-05-09 Marius Strobl- Merge r338254 from cxgbe(4):
2019-05-09 Toomas Soomeloader: ptable_print() needs two tabs sometimes
2019-05-09 Toomas Soomeloader: implement proper 8 char tab stops
2019-05-09 Hans Petter... Fix memory leak of PCI BUS structure in the LinuxKPI.
2019-05-09 Hans Petter... Fix regression issue after r346645 in the LinuxKPI.
2019-05-09 Andrey V. ElsukovIn mld_v2_cancel_link_timers() check number of referenc...
2019-05-09 Michael TuexenReceiver side DSACK implemenation.
2019-05-09 Michael TuexenPrevent cwnd to collapse down to 1 MSS after exiting...
2019-05-08 Gleb SmirnoffExistense of PCB route caching doesn't allow us to...
2019-05-08 Emmanuel Vadotetc/Makefile: Remove empty newline
2019-05-08 Colin PercivalBump EC2 AMI filesystem size up to 4000 MB.
2019-05-08 Warner Loshrename nvme_ctrlr_destroy_qpair to nvme_ctrlr_destroy_q...
2019-05-08 Konstantin... x86: Put other CPUs into tight loop when updating Intel...
2019-05-08 Emmanuel Vadotdts: Import files from Linux 5.1
2019-05-08 Brooks DavisUpdate dme(4) to reflect that it will not be removed...
2019-05-08 Emmanuel VadotImport Linux 5.1 DTS files
2019-05-08 Emmanuel Vadotdtb: allwinner: Add the pinebook dtb to the build
2019-05-08 Edward Tomasz... Add usage example to tree(3).
2019-05-08 Edward Tomasz... Mark inline functions with __unused; prevents compiler...
2019-05-08 Li-Wen HsuFix expected output after r347207
2019-05-08 Matt MacyEnable sys/disk.h consumers to avoid pulling in network...
2019-05-08 Emmanuel Vadotpkgbase: Deal with the last etc files
2019-05-08 Mateusz GuzikReduce umtx-related work on exec and exit
2019-05-08 Justin Hibbitspowerpc/booke: Rewrite pmap_sync_icache() a bit
2019-05-08 Ruslan BukinConnect Xilinx AXI drivers and Cadence Ethernet MAC...
2019-05-08 Justin Hibbitspowerpc/booke: Do as much work outside of TLB locks...
2019-05-08 Ruslan BukinAdd driver for the Xilinx AXI Direct Memory Access...
2019-05-08 Emmanuel VadotAdd support for USB 3.0 XHCI via ACPI
2019-05-08 Ruslan BukinAdd driver for Xilinx AXI Ethernet tri-mode (10/100...
2019-05-08 Ruslan Bukino Implement a bounce buffer based on device reserved...
2019-05-08 Antoine BrodinAdd wc(1) to native-xtools so that it can be used in...
2019-05-08 Conrad Meyerrandom(4): Don't complain noisily when an entropy sourc...
2019-05-08 Ed MasteAvoid literal @generated tag in file-generating scripts
2019-05-08 Hans Petter... Fix LINT linking issue.
2019-05-08 Hans Petter... Fix LINT compilation issue.
2019-05-08 Hans Petter... Bump the Mellanox driver version numbers and the FreeBS...
2019-05-08 Hans Petter... Make command workqueue persistant in mlx5core.
2019-05-08 Hans Petter... Fix race between driver unload and dumping firmware...
2019-05-08 Hans Petter... Ensure the flowtable rules are not freed twice in mlx5e...
2019-05-08 Hans Petter... Undo previous steps upon returning failure in mlx5en(4).
2019-05-08 Hans Petter... Make sure the flow destination structure does not use...
2019-05-08 Hans Petter... Flush command workqueue when command completion is...
2019-05-08 Hans Petter... Make command timeout way shorter in mlx5core.
2019-05-08 Hans Petter... Remove non-functional MLX5E_MAX_RX_SEGS macro in mlx5en(4).
2019-05-08 Hans Petter... Fix for compilation warning in mlx5en(4).
2019-05-08 Hans Petter... Rename functions from mlx5_fwdump to mlx5_ctl in mlx5core.
2019-05-08 Hans Petter... Ensure that only one command is specified at a time...
2019-05-08 Hans Petter... Implement firmware reset from userspace in mlx5tool(8).
2019-05-08 Hans Petter... Add Firmware Reset Level, MFRL, register accessors...
2019-05-08 Hans Petter... Add ConnectX-6 DX HCA ID to libmlx5.
2019-05-08 Hans Petter... Expose per-lane counters before correction mechanism...
2019-05-08 Hans Petter... Add support for extended PCIe counters in mlx5en(4).
2019-05-08 Hans Petter... Extend the counters framework in mlx5en(4).
2019-05-08 Hans Petter... Update performance counter bits in mlx5core.
2019-05-08 Hans Petter... Implement reading PCI power status in mlx5core.
2019-05-08 Hans Petter... Move workqueue from mlx5en(4) to mlx5core.
2019-05-08 Hans Petter... Always return success for RoCE modify port in mlx5ib.
2019-05-08 Hans Petter... Add support for new rates to mlx5ib.
2019-05-08 Hans Petter... Add support for 200Gbit speeds to libibverbs.
2019-05-08 Hans Petter... Add new rates to ibcore.
2019-05-08 Hans Petter... Do not add IFM_10G_LR and IFM_40G_ER4 to supported...
2019-05-08 Hans Petter... Add support for 200Gb ethernet speeds to mlx5core.
2019-05-08 Hans Petter... Remove unused speed enums in mlx5core.
2019-05-08 Hans Petter... Control automatic update of firmware on driver load...
2019-05-08 Hans Petter... Correct check for the calibration generation in mlx5en(4).
2019-05-08 Hans Petter... Let rx_out_of_buffer be a 32-bit counter in mlx5en(4).
2019-05-08 Hans Petter... Add vnic steering drop statistics in mlx5en(4).
2019-05-08 Hans Petter... Use software counters for rx_packets and rx_bytes in...
2019-05-08 Hans Petter... Add mlx5_firmware_update() in mlx5core.
2019-05-08 Hans Petter... Handle IB_EVENT_DEVICE_FATAL event in ipoib.
2019-05-08 Hans Petter... Fix for double bus master disable in mlx5core.
2019-05-08 Hans Petter... Document userspace firmware flash in mlx5tool(8) and...
2019-05-08 Hans Petter... Implement userspace firmware update for ConnectX-4...
2019-05-08 Hans Petter... Rename mlx5_fwdump_addr to more neutral mlx5_tool_addr...
2019-05-08 Hans Petter... Add mlxfw callbacks in mlx5core.
2019-05-08 Hans Petter... Initial version of Mellanox in-kernel firmware upgrade...
2019-05-08 Hans Petter... Convert remaining module parameters into SYSCTLs in...
2019-05-08 Hans Petter... Remove redundant line of code in mlx5core.
2019-05-08 Hans Petter... Change implicit and probably erronous EPERM to EIO...
2019-05-08 Hans Petter... Fix typo.
2019-05-08 Hans Petter... Fix style.
2019-05-08 Hans Petter... Fix netstat counters mapping in mlx5en(4).
2019-05-08 Hans Petter... Fix endless loop in ipoib_poll().
2019-05-08 Hans Petter... Avoid leaking send queue mbufs during error recovery...
2019-05-08 Hans Petter... Add helper functions to set/query MCC/MCDA/MCQI registe...
2019-05-08 Hans Petter... Enhance MCAM reg to allow query on access reg support...
2019-05-08 Hans Petter... Add MCC (Management Component Control) register definit...
2019-05-08 Hans Petter... Add reading the mcam_reg in mlx5core.
2019-05-08 Hans Petter... Query and cache PCAM, MCAM registers on initialization...
2019-05-08 Hans Petter... Implement PCAM, MCAM access register commands in mlx5core.
2019-05-08 Hans Petter... Expose PCAM, MCAM registers infrastructure in mlx5core.
2019-05-08 Hans Petter... Add sysctl(8) to control fast unload support in mlx5core.
next