emaste [Wed, 11 Dec 2019 16:43:54 +0000 (16:43 +0000)]
security.7: add caveat about interim sysctl paths from r355436
r355436 moved mitigation sysctls to machdep.mitigations but did not
rationalize the sense of the invidual knobs. Clarify that the old
names remain the canonical way to set these mitigations.
Backwards compatibility will be maintained for the original names
(e.g. hw.ibrs_disable), but not from the interim names
(e.g. machdep.mitigations.ibrs.disable).
avg [Wed, 11 Dec 2019 15:52:29 +0000 (15:52 +0000)]
add a sanity check to the system call registration code
A system call number should be at least reserved.
We do not expect an attempt to register a fixed number system call
when nothing at all is known about it.
dim [Tue, 10 Dec 2019 22:10:25 +0000 (22:10 +0000)]
Add a few missed source files to libllvm, for the MK_LLVM_TARGET_BPF=yes
case. Otherwise, linking of clang and other llvm based executables
would complain about missing symbols.
jhb [Tue, 10 Dec 2019 21:56:44 +0000 (21:56 +0000)]
Correct the offset of static TLS variables for Initial-Exec on RISC-V.
TP points to the start of the TLS block after the tcb, but
Obj_Entry.tlsoffset includes the tcb, so subtract the size of the tcb
to compute the offset relative to TP.
This is identical to the same fixes for powerpc in r339072 and r342671.
Reviewed by: James Clarke
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22661
ian [Tue, 10 Dec 2019 21:48:21 +0000 (21:48 +0000)]
Do not attach children of owc_gpiobus until interrupts are working.
The children of the bus need to do IO on the bus to probe for hardware
presence. Doing IO means timing the bus states using sbinuptime(), and
that requires working timecounters, which are not initialized until after
device attachment has completed.
wulf [Tue, 10 Dec 2019 20:23:05 +0000 (20:23 +0000)]
[ig4] Remove unused methods from bus interface
bus_get/set_resource methods are implemented in child device (iicbus).
As their implementation with bus_generic_rl_get/set calls do not
recurse up the tree, the versions in ig4 are never called.
kevans [Tue, 10 Dec 2019 19:16:00 +0000 (19:16 +0000)]
sed: process \r, \n, and \t
This is both reasonable and a common GNUism that a lot of ported software
expects.
Universally process \r, \n, and \t into carriage return, newline, and tab
respectively. Newline still doesn't function in contexts where it can't
(e.g. BRE), but we process it anyways rather than passing
UB \n (escaped ordinary) through to the underlying regex engine.
Adding a --posix flag to disable these was considered, but sed.1 already
declares this version of sed a super-set of POSIX specification and this
behavior is the most likely expected when one attempts to use one of these
escape sequences in pattern space.
This differs from pre-r197362 behavior in that we now honor the three
arguably most common escape sequences used with sed(1) and we do so outside
of character classes, too.
Other escape sequences, like \s and \S, will come later when GNU extensions
are added to libregex; sed will likely link against libregex by default,
since the GNU extensions tend to be fairly un-intrusive.
scottl [Tue, 10 Dec 2019 18:57:39 +0000 (18:57 +0000)]
Fix the TAA state machine to do the right thing when the TAA
migitation is available in microcode and the operator has set
the sysctl to automatic mode.
bdrewery [Tue, 10 Dec 2019 18:50:50 +0000 (18:50 +0000)]
Fix WITHOUT_CLANG build.
This decouples MK_LLVM_TARGET_ALL from MK_CLANG. It is fine if
LLVM_TARGET_* are set even if MK_CLANG is disabled. It never
made sense to depend MK_LLVM_TARGET_* to MK_CLANG (which I did
in r335706).
markj [Tue, 10 Dec 2019 18:15:20 +0000 (18:15 +0000)]
Add a helper function to the swapout daemon's deactivation code.
vm_swapout_object_deactivate_pages() is renamed to
vm_swapout_object_deactivate(), and the loop body is moved into the new
vm_swapout_object_deactivate_page(). This makes the code a bit easier
to follow and is in preparation for some functional changes.
markj [Tue, 10 Dec 2019 18:14:50 +0000 (18:14 +0000)]
Introduce vm_page_astate.
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
ian [Mon, 9 Dec 2019 21:55:44 +0000 (21:55 +0000)]
Allow baud rates of 1,228,800 and 1,843,200 on CP2101/2/3 usb-serial adapters.
The datasheets for these chips claim the maximum is 921,600, but testing
shows these two higher rates also work (but no rates above 921,600 other
than these two work; these represent dividing the base buad clock by 3 and 2
respectively).
markj [Mon, 9 Dec 2019 19:25:15 +0000 (19:25 +0000)]
Configure headphone redirection for the Dell L780 and X1 Carbon 7th gen.
As we do for many other laptops, put the headphone jack and speakers in
the same association by default so that the generic sound device
automatically switches between them.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
dim [Mon, 9 Dec 2019 19:17:56 +0000 (19:17 +0000)]
Correctly check for C++17 and higher when declaring timespec_get()
Summary:
In rS338751, the check to declare `timespec_get()` for C++17 and higher
was incorrectly done against a `cplusplus` define, while it should have
been `__cplusplus`.
Fix this by using `__cplusplus`, and also bump `__FreeBSD_version` so it
becomes possible to correctly check for `timespec_get()` in upstream
libc++ headers.
jhb [Mon, 9 Dec 2019 19:17:28 +0000 (19:17 +0000)]
Copy out aux args after the argument and environment vectors.
Partially revert r354741 and r354754 and go back to allocating a
fixed-size chunk of stack space for the auxiliary vector. Keep
sv_copyout_auxargs but change it to accept the address at the end of
the environment vector as an input stack address and no longer
allocate room on the stack. It is now called at the end of
copyout_strings after the argv and environment vectors have been
copied out.
This should fix a regression in r354754 that broke the stack alignment
for newer Linux amd64 binaries (and probably broke Linux arm64 as
well).
Reviewed by: kib
Tested on: amd64 (native, linux64 (only linux-base-c7), and i386)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22695
ian [Mon, 9 Dec 2019 19:00:39 +0000 (19:00 +0000)]
Switch gpioths(4) from using a callout to a taskqueue for periodic polling
of the sensor hardware. Part of the polling process involves signalling
the chip then waiting 20 milliseconds. This was being done with DELAY(),
which is a pretty rude thing to do in a callout. Now a taskqueue_thread
task is scheduled to do the polling, and because sleeping is allowed in
the task context, pause_sbt() replaces DELAY() for the 20ms wait.
kevans [Mon, 9 Dec 2019 17:34:40 +0000 (17:34 +0000)]
RPI: Fix DMA/SDHCI on the BCM2836 (Raspberry Pi 2)
r354875 pushed VCBUS <-> ARMC translations to runtime determination, but
incorrectly mapped addresses for the BCM2836 -- SOC_BCM2835 and SOC_BCM2836
are actually mutually exclusive, so the BCM2836 config (GENERIC) would have
taken the latter path in the header and used 0x3f000000 as peripheral start.
Easily fixed -- split out the BCM2836 into its own memmap config and use
that instead if SOC_BCM2836 is included. With this, we get back to userland
again.
Reported by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
luporl [Mon, 9 Dec 2019 13:40:23 +0000 (13:40 +0000)]
Enable use of ofwcons for early debug
This change enables the use of OpenFirmware Console (ofwcons), even when VGA is
available, allowing early kernel messages to be seen, that is important in case
of crashes before VGA console initialization.
This is specially useful in virtualized environments, where the user/developer
doesn't have full control of the virtualization engine (e.g. OpenStack).
The old behavior is preserved by default and, in order to use ofwcons, a few
tunables that have been introduced need to be set:
- hw.ofwfb.disable=1 - disable OFW FrameBuffer device
- machdep.ofw.mtx_spin=1 - change PPC OFW mutex to SPIN type, to match kernel
console's mutex type
- debug.quiesce_ofw=0 - don't call OFW quiesce, needed to keep ofwcons I/O
working
More details can be found at differential revision D20640.
dougm [Sun, 8 Dec 2019 22:33:51 +0000 (22:33 +0000)]
Define a vm_map method for user-space for advancing from a map entry
to its successor in cases where examining a map entry requires a
helper like kvm_read_all. Use that method, with kvm_read_all, to fix
procstat_getfiles_kvm, which tries to find the successor now without
using such a helper. This addresses a problem introduced by r355491.
mjg [Sun, 8 Dec 2019 21:30:04 +0000 (21:30 +0000)]
vfs: introduce v_irflag and make v_type smaller
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
mjg [Sun, 8 Dec 2019 21:13:07 +0000 (21:13 +0000)]
vfs: clean up vputx a little
1. replace hand-rolled macros for operation type with enum
2. unlock the vnode in vput itself, there is no need to branch on it. existence
of VPUTX_VPUT remains significant in that the inactive variant adds LK_NOWAIT
to locking request.
3. remove the useless v_usecount assertion. few lines above the checks if
v_usecount > 0 and leaves. should the value be negative, refcount would fail.
4. the CTR return vnode %p to the freelist is incorrect as vdrop may find the
vnode with holdcnt > 1. if the like should exist, it should be moved there
5. no need to error = 0 for everyone
Reviewed by: kib, jeff (previous version)
Differential Revision: https://reviews.freebsd.org/D22718
ian [Sun, 8 Dec 2019 21:12:33 +0000 (21:12 +0000)]
Add a MODULE_DEPEND() for the gpioths driver. Also, note that the prior commit
changed the sysctl format for the temperature from "I" to "IK", and
correspondingly changed the units from integer degrees C to decikelvin.
For access via sysctl(8) the output will be the same except that now
decimal fractions will be shown when available.
ian [Sun, 8 Dec 2019 20:42:58 +0000 (20:42 +0000)]
Add support for more chips to the gpioths driver.
Previously the driver supported the DHT11 sensor. Now it supports
DHT11, DHT12, DHT21, DHT22, AM3201, AM3202.
All these chips are similar, differing primarily in supported temperature
and humidity ranges and accuracy (and, presumably, cost). There are two
basic data formats reported by the various chips, and it is possible to
figure out at runtime which format to use for decoding the data based on
the range of values in a single byte of the humidity measurement. (which
is detailed in a comment block, so I won't recapitulate it here).
ian [Sun, 8 Dec 2019 20:36:13 +0000 (20:36 +0000)]
Simplify sysctl stuff in the gpioths driver. There is no need to use local
functions to handle the sysctls, they all just access simple readonly
integer variables. There's no need to track the oids of the ones we add,
since the teardown is done by newbus code, not the driver itself.
Also remove the DDB code, because it just provides access to the same data
that the sysctls already provide.
ian [Sun, 8 Dec 2019 20:13:42 +0000 (20:13 +0000)]
Several small fixes for the gpioths (temp/humidity sensor) driver.
At the end of a read cycle, set the gpio pin to INPUT rather than OUTPUT.
The state of the single-wire "bus" when idle should be high; setting the
pin to input allows the external pullup to pull the line high. Setting it
to output (and leaving it driving low) was leading a good read cycle followed
by one that would fail, and it just continued like that forever, effectively
reading the sensor once every 10 seconds instead of 5.
In the attach function, do an initial read from the device before registering
the sysctls for accessing the last-read values, to prevent reading spurious
values for the first 5 seconds after the driver attaches.
Do a callout_drain() in the detach function to prevent crashes after
unloading the module.
jhibbits [Sun, 8 Dec 2019 04:36:42 +0000 (04:36 +0000)]
powerpc: Use builtins for fls/flsl
Summary:
There's no need to use the fallback fls() and flsl() libkern functions
when the PowerISA includes instructions that already do the bulk of the
work. Take advantage of this through the GCC builtins __builtin_clz()
and __builtin_clzl().
jhibbits [Sun, 8 Dec 2019 04:17:04 +0000 (04:17 +0000)]
powerpc64/pmap: micro-optimize some PVO-PTE logic
Summary:
moea64_pte_sync_native() and moea64_pte_unset_native() don't need the
full PTE created, they only need to check that the PVO has a matching
PTE to the PTE in the page table. Don't waste time creating the full
PTE in this case.
jeff [Sun, 8 Dec 2019 01:55:23 +0000 (01:55 +0000)]
Fix two problems with r355149. The sysctl name collision code assumed that
zones would never be freed. In the case of tmpfs this was not true. While
here test for the right bit to disable the keg related sysctls for zones
that don't have kegs.
jeff [Sun, 8 Dec 2019 01:47:29 +0000 (01:47 +0000)]
Do not assert that the object lock is held in vm_object_set_writeable_dirty.
A valid reference is all that is required. If we race with a deallocation
we will harmlessly misidentify the type of an already dead object.
jeff [Sun, 8 Dec 2019 01:15:06 +0000 (01:15 +0000)]
Use a variant slab structure for offpage zones. This saves space in
embedded slabs but also is an opportunity to tidy up code and add
accessor inlines.
rmacklem [Sun, 8 Dec 2019 00:06:00 +0000 (00:06 +0000)]
Fix kernel handling of a NFSERR_MINORVERSMISMATCH NFSv4 server reply.
When an NFSv4 server replies NFSERR_MINORVERSMISMATCH, it does not generate
a status result for the first operation in the compound. Without this
patch, this will result in a bogus EBADXDR error return.
Returning EBADXDR is relatively harmless, but a correct reply of
NFSERR_MINORVERSMISMATCH is needed by the pNFS client to select the correct
minor version to use for a File Layout DS now that there can be NFSv4.2
DS servers.
mount_nfs.c still needs to be fixed for this, although how the mount fails
is only useful to help sysadmins isolate why a mount fails.
Found during testing of the NFSv4.2 client and server.
rmacklem [Sat, 7 Dec 2019 23:13:51 +0000 (23:13 +0000)]
Add some definitions for NFSv4.2 which will be used by subsequent commits.
This is a preliminary commit of NFSv4.2 definitions that will be used by
subsequent commits which adds NFSv4.2 support to the NFS client and server.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
kib [Sat, 7 Dec 2019 18:07:49 +0000 (18:07 +0000)]
Only return EPERM from kill(-pid) when no process was signalled.
As mandated by POSIX. Also clarify the kill(2) manpage.
While there, restructure the code in killpg1() to use helper which
keeps overall state of the process list iteration in the killpg1_ctx
structued, later used to infer the error returned.
Reported by: amdmi3
Reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D22621
dougm [Sat, 7 Dec 2019 17:14:33 +0000 (17:14 +0000)]
Remove the next and prev fields from vm_map_entry, to save a bit of
space. Where the vm_map tree now has null pointers, store pointers to
next and previous entries in right and left fields, making the binary
tree threaded. Have the predecessor and successor functions compute
what the prev and next fields previously stored.
mmel [Sat, 7 Dec 2019 16:14:23 +0000 (16:14 +0000)]
Add support for booting kernel directly from U-Boot using booti command.
In some cases, like is locked bootstrap or device's inability to boot from
removable media, we cannot use standard boot sequence and is necessary to
boot kernel directly from U-Boot.
jhibbits [Sat, 7 Dec 2019 03:34:03 +0000 (03:34 +0000)]
powerpc/pmap: NUMA-ize vm_page_array on powerpc
Summary:
This matches r351198 from amd64. This only applies to AIM64 and Book-E.
On AIM64 it short-circuits with one domain, to behave similar to
existing. Otherwise it will allocate 16MB huge pages to hold the page
array, across all NUMA domains. On the first domain it will shift the
page array base up, to "upper-align" the page array in that domain, so
as to reduce the number of pages from the next domain appearing in this
domain. After the first domain, subsequent domains will be allocated in
full 16MB pages, until the final domain, which can be short. This means
some inner domains may have pages accounted in earlier domains.
On Book-E the page array is setup at MMU bootstrap time so that it's
always mapped in TLB1, on both 32-bit and 64-bit. This reduces the TLB0
overhead for touching the vm_page_array, which reduces up to one TLB
miss per array access.
Since page_range (vm_page_startup()) is no longer used on Book-E but is on
32-bit AIM, mark the variable as potentially unused, rather than using a
nasty #if defined() list.
rmacklem [Sat, 7 Dec 2019 01:10:38 +0000 (01:10 +0000)]
Set the XATTRSUPPORT attribute bit for NFSv4.2, always cleared for now.
Since r355472 added code which clears the XATTRSUPPORT bit for non-NFSv4.2
mounts, it is now safe to set it.
There will be a series of these preliminary commits that will prepare for
a major commit of the NFSv4.2 client/server changes currently found in
subversion under projects/nfsv42/sys.
This commit completes updates to nfsproto.h required by the NFSv4.2.
kib [Sat, 7 Dec 2019 00:28:08 +0000 (00:28 +0000)]
x86: Restore the critical section around whole ipi_bitmap_handler() if
hardclock IPI is delivered.
In the current code after r355311, critical section is taken only
around hardclockintr() call, and sched_preempt() is called after the
section is exited. If we reschedule after exit, as we typically would
due to conditions that caused IPI, in ULE the runq tdq_ipipending is
not cleared, which blocks generation of further preempt IPIs.
Since all relatively modern (10 years) hardware has per-cpu event
timers, restoring the critical section conditionally does not affect
it.
Reported and tested by: cy
Diagnosed and reviewed by: jeff (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22716
projects / FreeBSD / FreeBSD.git / log