emaste [Tue, 13 Aug 2019 15:41:36 +0000 (15:41 +0000)]
Remove some more leftover rlogin man page xrefs
rcmds were removed in r32435 and these three man pages can trivially
drop the references.
There's still a reference in pts.4 because it describes a mode
(TIOCPKT_NOSTOP), and only lists rlogin/rlogind as examples of programs
that use that mode. To update later.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
ae [Tue, 13 Aug 2019 12:47:53 +0000 (12:47 +0000)]
Save ip_ttl value and restore it after checksum calculation.
Since ipvoly is used for checksum calculation, part of original IP
header is zeroed. This part includes ip_ttl field, that can be used
later in IP_MINTTL socket option handling.
rrs [Tue, 13 Aug 2019 12:41:15 +0000 (12:41 +0000)]
Place back in the dependency on HPTS via module depends versus
a fatal error in compiling. This was taken out by mistake
when I mis-merged from the 18q22p2 sources of rack in NF. Opps.
ian [Tue, 13 Aug 2019 03:49:53 +0000 (03:49 +0000)]
Fix the driver name in ads111x.4, and hook the manpage up to the build.
The driver was originally written with the name ads1115, but at the last
minute it got renamed to ads111x to reflect its support for many related
chips, but I forgot to update the manpage to match the renaming before
committing it all.
pfg [Tue, 13 Aug 2019 01:24:43 +0000 (01:24 +0000)]
Add deprecation notice to snd_ds1(4).
As suggested in:
https://wiki.freebsd.org/WhatsGoing/FreeBSD13
We will be dropping the snd_ds1 driver. The driver is known to be buggy
and no one has been working on it for years now.
Users of old Yamaha cards may have luck with the OSS drivers instead.
MFC after: 3 days
Diferential Revision: https://reviews.freebsd.org/D21138
imp [Mon, 12 Aug 2019 23:25:21 +0000 (23:25 +0000)]
Fix powerpc LINT build
tcpratelimit isn't supported as there's now atomic_add_64, so add it to the exclusion list
Add comment for why PPC_PROBE_CHIPSET is on the list
Remove UKBD_DFLT_KEYMAP now that ukbd works on all platforms.
imp [Mon, 12 Aug 2019 22:58:56 +0000 (22:58 +0000)]
Create files.x86
files.x86 is for the parts of the system that are common to both i386 and amd64
due too their nature. First up, to get the ball rolling, is fdc, the floppy disk
support. It works only on amd64 and i386 these days, and that's unlikely to
change.
Reviewed by: jhb, cem (earlier versrions)
Differential Revision: https://reviews.freebsd.org/D21210
imp [Mon, 12 Aug 2019 22:58:44 +0000 (22:58 +0000)]
Move sc out of the global file
x86 needs sc, as does sparc64. powerpc doesn't use it by default, but some old
powermac notebooks do not work with vt yet for reasons unknonw. Even so, I've
removed it from powerpc LINT. It's not in daily use there, and the intent is to
100% switch to vt now that it works for that platform to limit support burden.
All the other architectures omit some or all of the screen savers from their
lint config. Move them to the x86 NOTES files and remove the exclusions. This
reduces slightly the number of savers sparc64 compiles, but since they are in
GENERIC, the overage is adequate and if someone reaelly wants to sort them out
in sparc64 they can sweat the details and the testing.
kib [Mon, 12 Aug 2019 20:27:33 +0000 (20:27 +0000)]
Increase YPMAXRECORD to 16M to be compatible with Linux.
Since YP protocol definition uses the constant to declare
variable-size opaque byte strings, the change should be binary
compatible with existing installations which do not expose keys or
values larger than 1024 bytes.
All uses of local variables with YPMAXRECORD sizes were removed to
avoid insane stack use. On the other hand, variables with static
lifetime should be fine and only result in increased VA use.
Glibc made same change, increasing the allowed length for keys and
values in YP to 16M, in 2013.
luporl [Mon, 12 Aug 2019 12:51:47 +0000 (12:51 +0000)]
[PPC64] Save FPU registers before enabling VSX
Fixed trap handler logic, in order to make it save FPU registers,
if FPU is enabled, before enabling VSX. Without this change, FPU
register contents were being lost when set before VSX was enabled.
https://www.illumos.org/issues/6585
In any pool without the extensible dataset feature flag already enabled,
creating a dataset with dedup set to use one of the new checksums would result
in the following panic as soon as any data was added:
panic[cpu0]/thread=ffffff0006761c40: feature_get_refcount(spa, feature,
&refcount) != 48 (0x30 != 0x30), file: ../../common/fs/zfs/zfeature.c line 390
ffffff0006761830fffffffffba8fbdd () ffffff0006761890 zfs:feature_do_action+11a () ffffff00067618c0 zfs:spa_feature_incr+1e () ffffff0006761920 zfs:dmu_object_zapify+b7 () ffffff00067619b0 zfs:dsl_dataset_activate_feature+97 () ffffff0006761a20 zfs:dsl_dataset_sync+ba () ffffff0006761ab0 zfs:dsl_pool_sync+153 () ffffff0006761b70 zfs:spa_sync+26e () ffffff0006761c20 zfs:txg_sync_thread+227 () ffffff0006761c30 unix:thread_start+8 ()
Inspection showed that feature->fi_feature was 7, which is the value of
SPA_FEATURE_EXTENSIBLE_DATASET in the spa_feature enum.
Testing shows that the panic can be prevented by explicitly setting extensible
dataset as a dependency for the sha512, edonr, and skein feature flags.
Alternatively, the new checksums code could possibly be changed to obviate the
need for the dependency.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Richard Laager <rlaager@wiktel.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: ilovezfs <ilovezfs@icloud.com>
avg [Mon, 12 Aug 2019 10:30:00 +0000 (10:30 +0000)]
a stop gap fix for a race between dnode_hold and dnode_sync_free
The race was introduced in r337669, the large dnode feature import from
ZoL. The problem was debugged by ZoL developers and then,
independently, on FreeBSD.
The fix is an early proposal by Brian Behlendorf:
https://github.com/behlendorf/zfs/commit/50f32ed74e42aa28522e9681fb8ae55239fa33a7
This fix never went into ZoL. A larger change that was committed later
included a different solution because of the re-worked code.
Ideally, we want to revert this fix and re-synchronize FreeBSD large
dnode code with that in illumos (or newer ZoL). illumos has a later
import of the feature from ZoL that does not have the bug.
PR: 236480
Obtained from: Brian Behlendorf <behlendorf1@llnl.gov>
Submitted by: ncrogers@gmail.com (patch adaptation)
Reported by: ncrogers@gmail.com
Tested by: ncrogers@gmail.com,
Dennis Noordsij <dennis.noordsij@alumni.helsinki.fi>,
Julien Cigar <julien@perdition.city>
MFC after: 10 days
avg [Mon, 12 Aug 2019 10:00:32 +0000 (10:00 +0000)]
Allow ZVOL bookmarks to be listed recursively
Many thanks to cryx-freebsd@h3q.com for reporting the problem and
submitting a fix. I have chosen to take an equivalent but textually
different patch from ZoL just to avoid increasing divergence between
OpenZFS flavours.
jhibbits [Mon, 12 Aug 2019 03:03:56 +0000 (03:03 +0000)]
powerpc: Unify pmap definitions between AIM and Book-E
This is part 2 of r347078, pulling the page directory out of the Book-E
pmap. This breaks KBI for anything that uses struct pmap (such as vm_map)
so any modules that access this must be rebuilt.
cy [Mon, 12 Aug 2019 02:42:47 +0000 (02:42 +0000)]
Initialize the frentry (the control block that defines a rule) checksum
to zero. Matching checksums save time and effort by mitigating the need
for full rule compare.
cy [Sun, 11 Aug 2019 23:54:52 +0000 (23:54 +0000)]
Calculate the number interface array elements using the new FR_NUM macro
instead of the hard-coded value of 4. This is a precursor to increasing
the number of interfaces speficied in "on {interface, ..., interface}".
Note that though this feature is coded in ipf_y.y, it is partially
supported in the ipfilter kld, meaning it does not work yet (and is yet
to be documented in ipf.5 too).
cy [Sun, 11 Aug 2019 23:54:49 +0000 (23:54 +0000)]
r272552 applied the patch from ipfilter upstream fil.c r1.129 to fix
broken ipfilter rule matches (upstream bug #554). The upstream patch
was incomplete, it resolved all but one rule compare issue. The issue
fixed here is when "{to, reply-to, dup-to} interface" are used in
conjuncion with "on interface". The match was only made if the on keyword
was specified in the same order in each case referencing the same rule.
This commit fixes this.
The reason for this is that interface name strings and comment keyword
comments are stored in a a variable length field starting at fr_names
in the frentry struct. These strings are placed into this variable length
in the order they are encountered by ipf_y.y and indexed through index
pointers in fr_ifnames, fr_comment or one of the frdest struct fd_name
fields. (Three frdest structs are within frentry.) Order matters and
this patch takes this into account.
While in here it was discovered that though ipfilter is designed to
support multiple interface specifiations per rule (up to four), this
undocumented (the man page makes no mention of it) feature does not work.
A todo is to fix the multiple interfaces feature at a later date. To
understand the design decision as to why only four were intended, it is
suspected that the decision was made because Sun workstations and PCs
rarely if ever exceeded four NICs at the time, this is not true in 2019.
ian [Sun, 11 Aug 2019 23:19:56 +0000 (23:19 +0000)]
Revert r350841. I didn't realize that on this chip, reading the interrupt
status register clears pending interrupts. By moving that code out of the
interrupt handler into a taskqueue task, I effectively created an interrupt
storm by returning from the handler with the interrupt source still active.
We'll have to find a different solution for this driver's need to sleep
in an ithread context.
ian [Sat, 10 Aug 2019 20:08:37 +0000 (20:08 +0000)]
Remove use of intr_config_hook from the am335x_pmic and tda19988 drivers.
Long ago this was needed, but now low-level i2c controller drivers cleverly
defer attachment of the bus until interrupts are enabled (if they require
interrupts to function), so that every i2c slave device doesn't have to.
manu [Sat, 10 Aug 2019 18:50:37 +0000 (18:50 +0000)]
allwinner: Add a new clock aw_clk_m
We used the aw_clk_nm clock for clock with only one divider factor
and used a fake multiplier factor. This cannot work properly as we
end up writing the "fake" factor to the register (and so always set
the LSB to 1).
Create a new clock for those.
The reason for not using the clk_div clock is because those clocks are
a bit special. Since they are (almost) all related to video we also need
to set the parent clock (the main PLL) to a frequency that they can support.
As the main PLL have some minimal frequency that they can support we need to
be able to set the main PLL to a multiple of the desired frequency.
Let say you want to have a 71Mhz pixel clock (typical for a 1280x800 display)
and the main PLL cannot go under 192Mhz, you need to set it to 3 times the
desired frequency and set the divider to 3 on the hdmi clock.
So this also introduce the CLK_SET_ROUND_MULTIPLE flag that allow for this kind
of scenario.
manu [Sat, 10 Aug 2019 17:58:30 +0000 (17:58 +0000)]
allwinner: Rework the BUS_PASS on drivers
- Put all clock and control unit driver in BUS_PASS_RESOURCE except
for the DE2 CCU as it needs the main CCU to be available.
- Use BUS_PASS_CPU for a20_cpu_cfg as it makes more sense.
- For aw_syscon use SCHEDULER pass as we need it early for drivers
that attach in BUS_PASS_SUPPORTDEV
- For the rest we can use BUS_PASS_SUPPORTDEV
ian [Sat, 10 Aug 2019 17:48:11 +0000 (17:48 +0000)]
When responding to an interrupt in the am335x_pmic driver, use a taskqueue
thread to do the work that involves i2c IO, which sleeps while the IO is
in progress.
ngie [Sat, 10 Aug 2019 15:53:42 +0000 (15:53 +0000)]
tests/sys/opencrypto: enable armv8crypto on aarch64
This change makes required modifications in runtests to also only require the
aesni module on Intel (i386/amd64) platforms, as it is an Intel specific
module.
MFC after: 1 month
MFC to: ^/stable/12 (support not present on ^/stable/11)
Submitted by: Greg V <greg@unrelenting.technology>
Differential Revision: https://reviews.freebsd.org/D21018
brooks [Fri, 9 Aug 2019 23:50:57 +0000 (23:50 +0000)]
Don't add -Wno-class-memaccess with older gcc.
This is a gcc 8.0+ warning which needed to be silenced on for the riscv
build. amd64-xtoolchain-gcc still uses gcc 6.4.0 and does not understand
this flag.
jtl [Fri, 9 Aug 2019 05:18:59 +0000 (05:18 +0000)]
In m_pulldown(), before trying to prepend bytes to the subsequent mbuf,
ensure that the subsequent mbuf contains the remainder of the bytes
the caller sought. If this is not the case, fall through to the code
which gathers the bytes in a new mbuf.
This fixes a bug where m_pulldown() could fail to gather all the desired
bytes into consecutive memory.
PR: 238787
Reported by: A reddit user
Discussed with: emaste
Obtained from: NetBSD
MFC after: 3 days
imp [Thu, 8 Aug 2019 20:09:36 +0000 (20:09 +0000)]
Stopgap fix for gcc platforms.
Our in-tree gcc doesn't have a no-tree-vectorize optimization knob, so we get a
warning that it's unused. This causes the build to fail on all our gcc platforms.
Add a quick version check as a stop-gap measure to get CI building again.
rmacklem [Thu, 8 Aug 2019 20:07:38 +0000 (20:07 +0000)]
Remove some harmless cruft from vn_generic_copy_file_range().
An earlier version of the patch had code that set "error" between
line#s 2797-2799. When that code was moved, the second check for "error != 0"
could never be true and the check became harmless cruft.
This patch removes the cruft, mainly to make Coverity happy.
rmacklem [Thu, 8 Aug 2019 19:53:07 +0000 (19:53 +0000)]
Fix copy_file_range(2) for an unlikely race during hole finding.
Since the VOP_IOCTL(FIOSEEKDATA/FIOSEEKHOLE) calls are done with the
vnode unlocked, it is possible for another thread to do:
- truncate(), lseek(), write()
between the two calls and create a hole where FIOSEEKDATA returned the
start of data.
For this case, VOP_IOCTL(FIOSEEKHOLE) will return the same offset for
the hole location. This could result in an infinite loop in the copy
code, since copylen is set to 0 and the copy doesn't advance.
Usually, this race is avoided because of the use of rangelocks, but the
NFS server does not do range locking and could do a sequence like the
above to create the hole.
This patch checks for this case and makes the hole search fail, to avoid
the infinite loop.
At this time, it is an open question as to whether or not the NFS server
should do range locking to avoid this race.
imp [Thu, 8 Aug 2019 17:48:07 +0000 (17:48 +0000)]
Make arm64 32-bit mode compile with COMPAT_43
The COMPAT_43 option isn't quite like the other compat options, and arm64 makes
attempts to support it in 64-bit mode. In 32-bit compat mode, however, two
syscall implementations that COMPAT_FREEBSD32 assumes will be there are
missing. Provide implementations for these: ofreebsd32_sigreturn (which we'll
never encounter, so implement it as nosys as is done in kern_sig.c) and
ofreebsd32_getpagesize, where we'll always return 4096 since that's the only
PAGE_SIZE we support, similar to how the ia32 implementation does things.
The chain command can be used to chain load another binary.
If veriexec is enabled we should verify it first.
Note that on EFI systems the verification was already done
through firmware, assuming that Secure Boot was enabled there.
kib [Thu, 8 Aug 2019 16:48:19 +0000 (16:48 +0000)]
Fix stack grow for init.
During early stages of kern_exec(), including strings copyout,
p_textvp for init is NULL. This prevented stack grow from working for
init execution.
Without stack gap enabled, initial stack segment size is enough for
strings passed by kernel to init. With the gap enabled, the used
address might fall out of the initial segment, which kills init.
Exclude initproc from the check for contexts which should not cause
stack grow in the target map.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
thj [Thu, 8 Aug 2019 11:43:09 +0000 (11:43 +0000)]
Rename IPPROTO 33 from SEP to DCCP
IPPROTO 33 is DCCP in the IANA Registry:
https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml
IPPROTO_SEP was added about 20 years ago in r33804. The entries were added
straight from RFC1700, without regard to whether they were used.
The reference in RFC1700 for SEP is '[JC120] <mystery contact>', this is an
indication that the protocol number was probably in use in a private network.
As RFC1700 is no longer the authoritative list of internet numbers and that
IANA assinged 33 to DCCP in RFC4340, change the header to the actual
authoritative source.
frag6: move public structure into file local space.
Move ip6asfrag and the accompanying IP6_REASS_MBUF macro from
ip6_var.h into frag6.c as they are not used outside frag6.c.
Sadly struct ip6q is all over the mac framework so we have to
leave it public.
This reduces the public KPI space.
MFC after: 3 months
X-MFC: possibly MFC the #define only to stable branches
Sponsored by: Netflix
Consitently put () around return values.
Do not assign variables at the time of variable declaration.
Sort variables. Rename ia to ia6, remove/reuse some variables used only
once or twice for temporary calculations.
Cleanup some comments (start with upper case, ends in punctuation,
use width and do not consume vertical space). Update comments to
RFC8200. Some whitespace changes.
projects / FreeBSD / FreeBSD.git / log