melifaro [Fri, 18 Dec 2020 22:00:57 +0000 (22:00 +0000)]
Switch direct rt fields access in rtsock.c to newly-create field acessors.
rtsock code was build around the assumption that each rtentry record
in the system radix tree is a ready-to-use sockaddr. This assumptions
turned out to be not quite true:
* masks have their length tweaked, so we have rtsock_fix_netmask() hack
* IPv6 addresses have their scope embedded, so we have another explicit
deembedding hack.
Change the code to decouple rtentry internals from rtsock code using
newly-created rtentry accessors. This will allow to eventually eliminate
both of the hacks and change rtentry dst/mask format.
markj [Fri, 18 Dec 2020 16:04:48 +0000 (16:04 +0000)]
acpi: Ensure that adjacent memory affinity table entries are coalesced
The SRAT may contain multiple distinct entries that together describe a
contiguous region of physical memory. In this case we were not
coalescing the corresponding entries in the memory affinity table, which
led to fragmented phys_avail[] entries. Since r338431 the vm_phys_segs[]
entries derived from phys_avail[] will be coalesced, resulting in a
situation where vm_phys_segs[] entries do not have a covering
phys_avail[] entry. vm_page_startup() will not add such segments to the
physical memory allocator, leaving them unused.
Reported by: Don Morris <dgmorris@earthlink.net>
Reviewed by: kib, vangyzen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27620
jrtc27 [Fri, 18 Dec 2020 15:07:14 +0000 (15:07 +0000)]
virtio_mmio: Fix feature negotiation copy-paste issue in r361943
This caused us to write to the low half of the feature word twice, once with
the high bits and once with the low bits. Common legacy device implementations
seem to be fairly lenient about being able to write to the feature bits
multiple times, but Arm's models use a stricter implementation that will ignore
the second write. This fixes using vtnet(4) on those models.
mw [Fri, 18 Dec 2020 10:09:21 +0000 (10:09 +0000)]
Fix abort in jemalloc extent coalescing.
Fix error in extent_try_coalesce_impl(), which could cause abort
to happen when trying to coalesce extents backwards. The error could
happen because of how extent_before_get() function works. This function
gets address of previous extent, by subtracting page size from current
extent address. If current extent is located at PAGE_SIZE offset, this
address resolved to 0x0000. An assertion in rtree_leaf_elm_lookup
then caused the running program to abort.
This problem was discovered when trying to build world on 32-bit
machines with ASLR and PIE enabled. The problem was encountered
on armv7 and i386 machines, but most likely other 32-bit
architectures are affected as well.
While this patch fixes one problem with buildworld on 32-bit platforms
with ASLR, the build still fails, however it happens much later
and due to lack of memory.
The change is aligned with accepted fix in the upstream Jemalloc
repository (https://github.com/jemalloc/jemalloc/pull/1973).
As it doesn't apply on top of Jemalloc tree, its updated version
was eventually merged: https://github.com/jemalloc/jemalloc/pull/2003
kib [Fri, 18 Dec 2020 03:46:50 +0000 (03:46 +0000)]
pci_iov: When pci_iov_detach(9) is called, destroy VF children
instead of bailing out with EBUSY if there are any.
If driver module is unloaded, or just device is forcibly detached from
the driver, there is no way for driver to correctly unload otherwise.
Esp. if there are resources dedicated to the VFs which prevent turning
down other resources.
grehan [Fri, 18 Dec 2020 00:38:48 +0000 (00:38 +0000)]
Fix issues with various VNC clients.
- support VNC version 3.3 (macos "Screen Sharing" builtin client)
- wait until client has requested an update prior to sending framebuffer data
- don't send an update if no framebuffer updates detected
- increase framebuffer poll frequency to 30Hz, and double that when
kbd/mouse input detected
- zero uninitialized array elements in rfb_send_server_init_msg()
- fix overly large allocation in rfb_init()
- use atomics for flags shared between input and output threads
- use #defines for constants
This work was contributed by Marko Kiiskila, with reuse of some earlier
work by Henrik Gulbrandsen.
jhb [Thu, 17 Dec 2020 20:31:17 +0000 (20:31 +0000)]
Use a template assembly file for firmware object files.
Similar to r366897, this uses the .incbin directive to pull in a
firmware file's contents into a .fwo file. The same scheme for
computing symbol names from the filename is used as before to maximize
compatiblity and not require rebuilding existing .fwo files for
NO_CLEAN builds. Using ld -o binary requires extra hacks in linkers
to either specify ABI options (e.g. soft- vs hard-float) or to ignore
ABI incompatiblities when linking certain objects (e.g. object files
with only data). Using the compiler driver avoids the need for these
hacks as the compiler driver is able to set all the appropriate ABI
options.
emaste [Thu, 17 Dec 2020 19:58:29 +0000 (19:58 +0000)]
Add initial version of git commit message preparation hook
Start with a slightly modified version of the SVN commit template, to
allow developers to experiment. This will be updated in the future as
our process and techniques evolve.
This can be installed by copying or symlinking into the .git/hooks/
directory.
Feedback from: cem, jhb
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27633
kib [Thu, 17 Dec 2020 19:51:39 +0000 (19:51 +0000)]
Fix a race in tty_signal_sessleader() with unlocked read of s_leader.
Since we do not own the session lock, a parallel killjobc() might
reset s_leader to NULL after we checked it. Read s_leader only once
and ensure that compiler is not allowed to reload.
While there, make access to t_session somewhat more pretty by using
local variable.
kevans [Thu, 17 Dec 2020 18:24:36 +0000 (18:24 +0000)]
lualoader: cli: provide a show-module-options loader command
This effectively dumps everything lualoader knows about to the console using
the libsa pager; that particular lua interface was added in r368591.
A pager stub implementation has been added that just dumps the output as-is
as a compat shim for older loader binaries that do not have lpager. This
stub should be moved into a more appropriate .lua file if we add anything
else that needs the pager.
manu [Thu, 17 Dec 2020 17:11:14 +0000 (17:11 +0000)]
Add IRQ resource to SPIBUS
Add capability to SPIBUS to have child device with IRQ.
For example many ADC chip have a dedicated pin to signal "data ready"
and the host can just wait for a interrupt to go out and read the result.
It is the same code as in R282674 and R282702 for IICBUS by Michal Meloun
Submitted by: Oskar Holmund <oskar.holmlund@ohdata.se>
Differential Revision: https://reviews.freebsd.org/D27396
kib [Thu, 17 Dec 2020 17:08:25 +0000 (17:08 +0000)]
Change POSIX compliance level for visibility of strerror_l(3).
Third-party code tests for strerror_l(3) without specifying
_POSIX_SOURCE, and then expects that the function is prototyped with
_POSIX_SOURCE set to 200112.
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
afedorov [Thu, 17 Dec 2020 16:52:40 +0000 (16:52 +0000)]
[bhyve] virtio-net: Do not allow receiving packets until features have been negotiated.
Enforce the requirement that the RX callback cannot be called after a reset until the features have been negotiated.
This fixes a race condition where the receive callback is called during a device reset.
mhorne [Thu, 17 Dec 2020 15:00:19 +0000 (15:00 +0000)]
bsdinstall: remove VTOC8 partition scheme option
Now that sparc64 has been removed, there are no kernels built with
support for the VTOC8 partitioning scheme by default. Remove the option
from the installer, as it is unsupported on all installer images
produced by re@.
The existing logic is nice in theory, but in practice freebsd-update will
not preserve the timestamps on these files. When doing a major upgrade, e.g.
from 12.1-RELEASE -> 12.2-RELEASE, pwd.mkdb et al. appear in the INDEX and
we clobber the timestamp several times in the process of packaging up the
existing system into /var/db/freebsd-update/files and extracting for
comparisons. This leads to these files not getting regenerated when they're
most likely to be needed.
Measures could be taken to preserve timestamps, but it's unclear whether
the complexity and overhead of doing so is really outweighed by the marginal
benefit.
I observed this issue when pkg subsequently failed to install a package that
wanted to add a user, claiming that the user was removed in the process.
bapt@ pointed to this pre-existing bug with freebsd-update as the cause.
pfg [Thu, 17 Dec 2020 02:54:32 +0000 (02:54 +0000)]
/etc/services: attempt to bring the database to this century 2/2.
This is the final half of splitting r358153 in two, in order to avoid a build
system bugs and being able to merge an earlier change to previous releases.
Add a note to UPDATING to avoid people building from very old systems from
having issues with mergemaster
rmacklem [Thu, 17 Dec 2020 00:20:57 +0000 (00:20 +0000)]
Make mountcritremote dependent upon nfscbd.
Although it is not often needed, the nfscbd(8) should be running when
NFSv4 mounts are done if callback functionality is required.
Callback functionality is required for the NFSv4 server to issue
delegations or pNFS layouts.
This patch adds nfscbd to the mountcritremote's REQUIRED line
to ensure it is started before NFS mounts specified in /etc/fstab
are done.
brooks [Thu, 17 Dec 2020 00:00:21 +0000 (00:00 +0000)]
newvers.sh: Speed up git_tree_modified
We're looking for file content differences, so ask the question of git
more directly. This helps a lot, saving tens of thousands of fork()s,
when the builder and editor see different stat() results (e.g., UIDs),
as they might with containers.
mjg [Wed, 16 Dec 2020 18:01:41 +0000 (18:01 +0000)]
fd: remove redundant saturation check from fget_unlocked_seq
refcount_acquire_if_not_zero returns true on saturation.
The case of 0 is handled by looping again, after which the originally
found pointer will no longer be there.
mmel [Wed, 16 Dec 2020 14:39:24 +0000 (14:39 +0000)]
Use the standard method for localizing of MSI-X table bar.
Current way, hardcoded value plus heuristic is not conform to the PCI(e)
specification and it fails on systems where MSI-X bar is not initialized by
BIOS/ACPI (many arm or arm64 systems for example).
Instead, use the standard PCI(e) capability for determining of
MSIX table bar address.
mmel [Wed, 16 Dec 2020 14:36:57 +0000 (14:36 +0000)]
Allocate right number of pages for the bounced buffers crossing the page.
One of the disadvantages of our current busdma code is the fact that
we process the bounced buffer in a page-by-page manner. This means that
the short (subpage) buffer allocated across page boundaries is bounced
to 2 separate pages.
This suboptimal behavior is consistent across all platforms and can be
related to (probably unimplementable or incompatible with bouncing)
BUS_DMA_KEEP_PG_OFFSET flag.
Therefore, allocate one additional page to be fully comply with this
requirement.
jhb [Wed, 16 Dec 2020 00:13:32 +0000 (00:13 +0000)]
Use uintptr_t instead of unsigned long for pointers.
The sense_ptr thing is quite broken. As near as I can tell, the
driver tries to copyout to a physical address rather than whatever
user address the sense buffer should be copied to. It is not
immediately obvious what user address the sense buffer should be
copied to.
emaste [Tue, 15 Dec 2020 17:44:19 +0000 (17:44 +0000)]
Retire obsolete GDB 6.1.1
GDB 6.1.1 was released in June 2004 and is long obsolete. It does not
support all of the architectures that FreeBSD does, and imposes
limitations on the FreeBSD kernel build, such as the continued use of
DWARF2 debugging information.
It was kept (in /usr/libexec/) only for use by crashinfo(8), which
extracts some basic information from a kernel core dump after a crash.
Crashinfo already prefers gdb from port/package if installed.
Future work may add kernel debug support to LLDB or find another path
for crashinfo's needs, but in any case we do not want to ship the
excessively outdated GDB in FreeBSD 13.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27610
manu [Tue, 15 Dec 2020 15:13:06 +0000 (15:13 +0000)]
release: Rename arm64/RPI3.conf to arm64/RPI.conf
We now have a u-boot port and config.txt for booting on all 64bits
variant of the RPI boards (RPI2v1.1, RPI3* and RPI4*) so use
the new u-boot-rpi-arm64 and the config_arm64.txt files.
kib [Mon, 14 Dec 2020 22:52:29 +0000 (22:52 +0000)]
amd64 pmap: fix PCID mode invalidations
When r362031 moved local TLB invalidation after shootdown IPI send, it
moved too much. In particular, PCID-mode clearing of the pm_gen
generation counters must occur before IPIs are send, which is in fact
described by the comment before seq_cst fence in the invalidation
functions.
Fix it by extracting pm_gen clearing into new helper
pmap_invalidate_preipi(), which is executed before a call to
smp_masked_tlb_shootdown().
Rest of the local invalidation callbacks is simplified as result, and
become very similar to the remote shootdown handlers (to be merged in
some future).
Move pin of the thread to pmap_invalidate_preipi(), and do unpin in
smp_masked_tlb_shootdown().
Reported and tested by: mjg (previous version)
Reviewed by: alc, cem (previous version), markj
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D227588
melifaro [Mon, 14 Dec 2020 22:23:08 +0000 (22:23 +0000)]
Enable ROUTE_MPATH support in GENERIC kernels.
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
tuexen [Mon, 14 Dec 2020 22:13:58 +0000 (22:13 +0000)]
Improve the counting of blocks used to transfer a file from the
server to the client in case of not using an OACK: Don't miss
the first block in case of it is not also the last one.
mmel [Mon, 14 Dec 2020 13:10:19 +0000 (13:10 +0000)]
Finish implementation of ARM PMU interrupts.
The ARM PMU may use single per-core interrupt or may use multiple generic
interrupts, one per core. In this case, special attention must be paid to
the correct identification of the physical location of the core, its order
in the external database (FDT) and the associated cpuid.
Also keep in mind that a SoC can have multiple different PMUs
(usually one per cluster)
mmel [Mon, 14 Dec 2020 11:57:43 +0000 (11:57 +0000)]
Verify (and fix) the context_id argument passed to the mpentry () by PSCI.
Some older PSCI implementations corrupt (or do not pass) the context_id
argument to newly started secondary cores. Although the ideal solution to this
problem is u-boot update, we can find the correct value for the argument (cpuid)
by comparing of real core mpidr register with the value stored in pcu->mpidr.
hselasky [Mon, 14 Dec 2020 11:56:16 +0000 (11:56 +0000)]
Be bug compatible with other operating systems by allowing non-sequential
interface numbering for USB descriptors in userspace. Else certain USB
control requests using the interface number, won't be recognized by the
USB firmware.
Refer to section 9.2.3 in the USB 2.0 specification:
Interfaces are numbered from zero to one less than the number of concurrent interfaces
supported by the configuration.
jrtc27 [Mon, 14 Dec 2020 00:54:05 +0000 (00:54 +0000)]
loader: Ignore the .interp section on RISC-V
Without this we risk having the .interp section be placed earlier in the
file and mess with section offsets; in particular it has been seen to be
placed at the start of the file and cause the PE/COFF header to not be
at address 0. This is the same fix as was done for arm64 in r365578.
jrtc27 [Mon, 14 Dec 2020 00:50:45 +0000 (00:50 +0000)]
strdup.3: Function appeared in 4.3BSD-Reno, not 4.4BSD
Linux claims 4.3BSD, we claim 4.4BSD and OpenBSD claims 4.3BSD-Reno. It turns
out that OpenBSD got it right: the function was added in late 1988 a few months
after 4.3BSD-Tahoe, well in advance of 4.3BSD-Reno.
jrtc27 [Mon, 14 Dec 2020 00:47:59 +0000 (00:47 +0000)]
mips: Fix sub-word atomics implementation
These aligned the address but then always used the least significant
bits of the value in memory, which is the wrong half 50% of the time for
16-bit atomics and the wrong quarter 75% of the time for 8-bit atomics.
These bugs were all present in r178172, the commit that added the mips
port, and have remained for its entire existence to date.
jrtc27 [Mon, 14 Dec 2020 00:46:24 +0000 (00:46 +0000)]
loader: Print autoboot countdown immediately, not at 9
For the first second otime and ntime are equal so no message gets
printed. Instead we should print the countdown right from the start,
although we do it at the end of the first iteration so that if a key has
already been pressed then the message is suppressed.
tuexen [Sun, 13 Dec 2020 23:51:51 +0000 (23:51 +0000)]
Harden the handling of outgoing streams in case of an restart or INIT
collision. This avouds an out-of-bounce access in case the peer can
break the cookie signature. Thanks to Felix Wilhelm from Google for
reporting the issue.
se [Sun, 13 Dec 2020 19:06:59 +0000 (19:06 +0000)]
Fix WITHOUT_ICONV build
Move the include of langinfo.h out of the WITH_ICONV condition block,
since it is not dependent on ICONV. This was correct when nl_langinfo()
had only been called in the WITH_ICONV case, but that is no longer the
case.
projects / FreeBSD / FreeBSD.git / log