]> CyberLeo.Net >> Repos - FreeBSD/releng/10.2.git/blob - contrib/apr-util/dbm/apr_dbm_berkeleydb.c
- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1
[FreeBSD/releng/10.2.git] / contrib / apr-util / dbm / apr_dbm_berkeleydb.c
1 /* Licensed to the Apache Software Foundation (ASF) under one or more
2  * contributor license agreements.  See the NOTICE file distributed with
3  * this work for additional information regarding copyright ownership.
4  * The ASF licenses this file to You under the Apache License, Version 2.0
5  * (the "License"); you may not use this file except in compliance with
6  * the License.  You may obtain a copy of the License at
7  *
8  *     http://www.apache.org/licenses/LICENSE-2.0
9  *
10  * Unless required by applicable law or agreed to in writing, software
11  * distributed under the License is distributed on an "AS IS" BASIS,
12  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13  * See the License for the specific language governing permissions and
14  * limitations under the License.
15  */
16
17 #include "apr_strings.h"
18 #define APR_WANT_MEMFUNC
19 #include "apr_want.h"
20
21 #define APU_WANT_DB
22 #include "apu_want.h"
23
24 #if APR_HAVE_STDLIB_H
25 #include <stdlib.h> /* for abort() */
26 #endif
27
28 #include "apu_config.h"
29 #include "apu.h"
30
31 #if APU_HAVE_DB 
32 #include "apr_dbm_private.h"
33
34 /*
35  * We pick up all varieties of Berkeley DB through db.h (included through
36  * apu_select_dbm.h). This code has been compiled/tested against DB1,
37  * DB_185, DB2, DB3, and DB4.
38  */
39
40 #if   defined(DB_VERSION_MAJOR) && (DB_VERSION_MAJOR >= 4)
41 /* We will treat anything greater than 4.1 as DB4.
42  * We can treat 4.0 as DB3.
43  */
44 #if   DB_VERSION_MAJOR > 4 || (defined(DB_VERSION_MINOR) && (DB_VERSION_MINOR >= 1))
45 #define DB_VER 4
46 #elif DB_VERSION_MAJOR == 4
47 #define DB_VER 3
48 #endif
49 #elif defined(DB_VERSION_MAJOR) && (DB_VERSION_MAJOR == 3)
50 #define DB_VER 3
51 #elif defined(DB_VERSION_MAJOR) && (DB_VERSION_MAJOR == 2)
52 #define DB_VER 2
53 #else
54 #define DB_VER 1
55 #endif
56
57 typedef struct {
58     DB *bdb;
59 #if DB_VER != 1
60     DBC *curs;
61 #endif
62 } real_file_t;
63
64
65 #if DB_VER == 1
66 #define TXN_ARG
67 #else
68 #define TXN_ARG NULL,
69 #endif
70
71 #define GET_BDB(f)      (((real_file_t *)(f))->bdb)
72
73 #define do_fetch(bdb, k, v)     ((*(bdb)->get)(bdb, TXN_ARG &(k), &(v), 0))
74
75 #if DB_VER == 1
76 #include <sys/fcntl.h>
77 #define APR_DBM_DBMODE_RO       O_RDONLY
78 #define APR_DBM_DBMODE_RW       O_RDWR
79 #define APR_DBM_DBMODE_RWCREATE (O_CREAT | O_RDWR)
80 #define APR_DBM_DBMODE_RWTRUNC  (O_CREAT | O_RDWR | O_TRUNC)
81 #else
82 #define APR_DBM_DBMODE_RO       DB_RDONLY
83 #define APR_DBM_DBMODE_RW       0
84 #define APR_DBM_DBMODE_RWCREATE DB_CREATE
85 #define APR_DBM_DBMODE_RWTRUNC  DB_TRUNCATE
86 #endif /* DBVER == 1 */
87
88 /* --------------------------------------------------------------------------
89 **
90 ** UTILITY FUNCTIONS
91 */
92
93 /* map a DB error to an apr_status_t */
94 static apr_status_t db2s(int dberr)
95 {
96     if (dberr != 0) {
97         /* ### need to fix this */
98         return APR_OS_START_USEERR + dberr;
99     }
100
101     return APR_SUCCESS;
102 }
103
104
105 static apr_status_t set_error(apr_dbm_t *dbm, apr_status_t dbm_said)
106 {
107     apr_status_t rv = APR_SUCCESS;
108
109     /* ### ignore whatever the DBM said (dbm_said); ask it explicitly */
110
111     if (dbm_said == APR_SUCCESS) {
112         dbm->errcode = 0;
113         dbm->errmsg = NULL;
114     }
115     else {
116         /* ### need to fix. dberr was tossed in db2s(). */
117         /* ### use db_strerror() */
118         dbm->errcode = dbm_said;
119 #if DB_VER == 1 || DB_VER == 2
120         dbm->errmsg = NULL;
121 #else
122         dbm->errmsg = db_strerror(dbm_said - APR_OS_START_USEERR);
123 #endif
124         rv = dbm_said;
125     }
126
127     return rv;
128 }
129
130 /* --------------------------------------------------------------------------
131 **
132 ** DEFINE THE VTABLE FUNCTIONS FOR BERKELEY DB
133 **
134 ** ### we may need three sets of these: db1, db2, db3
135 */
136
137 static apr_status_t vt_db_open(apr_dbm_t **pdb, const char *pathname,
138                                apr_int32_t mode, apr_fileperms_t perm,
139                                apr_pool_t *pool)
140 {
141     real_file_t file;
142     int dbmode;
143
144     *pdb = NULL;
145
146     switch (mode) {
147     case APR_DBM_READONLY:
148         dbmode = APR_DBM_DBMODE_RO;
149         break;
150     case APR_DBM_READWRITE:
151         dbmode = APR_DBM_DBMODE_RW;
152         break;
153     case APR_DBM_RWCREATE:
154         dbmode = APR_DBM_DBMODE_RWCREATE;
155         break;
156     case APR_DBM_RWTRUNC:
157         dbmode = APR_DBM_DBMODE_RWTRUNC;
158         break;
159     default:
160         return APR_EINVAL;
161     }
162
163     {
164         int dberr;
165
166 #if DB_VER >= 3
167         if ((dberr = db_create(&file.bdb, NULL, 0)) == 0) {
168             if ((dberr = (*file.bdb->open)(file.bdb,
169 #if DB_VER == 4
170                                            NULL,
171 #endif
172                                            pathname, NULL, 
173                                            DB_HASH, dbmode, 
174                                            apr_posix_perms2mode(perm))) != 0) {
175                 /* close the DB handler */
176                 (void) (*file.bdb->close)(file.bdb, 0);
177             }
178         }
179         file.curs = NULL;
180 #elif DB_VER == 2
181         dberr = db_open(pathname, DB_HASH, dbmode, apr_posix_perms2mode(perm),
182                         NULL, NULL, &file.bdb);
183         file.curs = NULL;
184 #else
185         file.bdb = dbopen(pathname, dbmode, apr_posix_perms2mode(perm),
186                           DB_HASH, NULL);
187         if (file.bdb == NULL)
188             return APR_EGENERAL;      /* ### need a better error */
189         dberr = 0;
190 #endif
191         if (dberr != 0)
192             return db2s(dberr);
193     }
194
195     /* we have an open database... return it */
196     *pdb = apr_pcalloc(pool, sizeof(**pdb));
197     (*pdb)->pool = pool;
198     (*pdb)->type = &apr_dbm_type_db;
199     (*pdb)->file = apr_pmemdup(pool, &file, sizeof(file));
200
201     /* ### register a cleanup to close the DBM? */
202
203     return APR_SUCCESS;
204 }
205
206 static void vt_db_close(apr_dbm_t *dbm)
207 {
208     (*GET_BDB(dbm->file)->close)(GET_BDB(dbm->file)
209 #if DB_VER != 1
210                                  , 0
211 #endif
212         );
213 }
214
215 static apr_status_t vt_db_fetch(apr_dbm_t *dbm, apr_datum_t key,
216                                 apr_datum_t * pvalue)
217 {
218     DBT ckey = { 0 };
219     DBT rd = { 0 };
220     int dberr;
221
222     ckey.data = key.dptr;
223     ckey.size = key.dsize;
224
225     dberr = do_fetch(GET_BDB(dbm->file), ckey, rd);
226
227     /* "not found" is not an error. return zero'd value. */
228     if (dberr ==
229 #if DB_VER == 1
230         RET_SPECIAL
231 #else
232         DB_NOTFOUND
233 #endif
234         ) {
235         memset(&rd, 0, sizeof(rd));
236         dberr = 0;
237     }
238
239     pvalue->dptr = rd.data;
240     pvalue->dsize = rd.size;
241
242     /* store the error info into DBM, and return a status code. Also, note
243        that *pvalue should have been cleared on error. */
244     return set_error(dbm, db2s(dberr));
245 }
246
247 static apr_status_t vt_db_store(apr_dbm_t *dbm, apr_datum_t key,
248                                 apr_datum_t value)
249 {
250     apr_status_t rv;
251     DBT ckey = { 0 };
252     DBT cvalue = { 0 };
253
254     ckey.data = key.dptr;
255     ckey.size = key.dsize;
256
257     cvalue.data = value.dptr;
258     cvalue.size = value.dsize;
259
260     rv = db2s((*GET_BDB(dbm->file)->put)(GET_BDB(dbm->file),
261                                          TXN_ARG
262                                          &ckey,
263                                          &cvalue,
264                                          0));
265
266     /* store any error info into DBM, and return a status code. */
267     return set_error(dbm, rv);
268 }
269
270 static apr_status_t vt_db_del(apr_dbm_t *dbm, apr_datum_t key)
271 {
272     apr_status_t rv;
273     DBT ckey = { 0 };
274
275     ckey.data = key.dptr;
276     ckey.size = key.dsize;
277
278     rv = db2s((*GET_BDB(dbm->file)->del)(GET_BDB(dbm->file),
279                                          TXN_ARG
280                                          &ckey,
281                                          0));
282
283     /* store any error info into DBM, and return a status code. */
284     return set_error(dbm, rv);
285 }
286
287 static int vt_db_exists(apr_dbm_t *dbm, apr_datum_t key)
288 {
289     DBT ckey = { 0 };   /* converted key */
290     DBT data = { 0 };
291     int dberr;
292
293     ckey.data = key.dptr;
294     ckey.size = key.dsize;
295
296     dberr = do_fetch(GET_BDB(dbm->file), ckey, data);
297
298     /* note: the result data is "loaned" to us; we don't need to free it */
299
300     /* DB returns DB_NOTFOUND if it doesn't exist. but we want to say
301        that *any* error means it doesn't exist. */
302     return dberr == 0;
303 }
304
305 static apr_status_t vt_db_firstkey(apr_dbm_t *dbm, apr_datum_t * pkey)
306 {
307     real_file_t *f = dbm->file;
308     DBT first = { 0 };
309     DBT data = { 0 };
310     int dberr;
311
312 #if DB_VER == 1
313     dberr = (*f->bdb->seq)(f->bdb, &first, &data, R_FIRST);
314 #else
315     if ((dberr = (*f->bdb->cursor)(f->bdb, NULL, &f->curs
316 #if DB_VER >= 3 || ((DB_VERSION_MAJOR == 2) && (DB_VERSION_MINOR > 5))
317                                    , 0
318 #endif
319              )) == 0) {
320         dberr = (*f->curs->c_get)(f->curs, &first, &data, DB_FIRST);
321         if (dberr == DB_NOTFOUND) {
322             memset(&first, 0, sizeof(first));
323             (*f->curs->c_close)(f->curs);
324             f->curs = NULL;
325             dberr = 0;
326         }
327     }
328 #endif
329
330     pkey->dptr = first.data;
331     pkey->dsize = first.size;
332
333     /* store any error info into DBM, and return a status code. */
334     return set_error(dbm, db2s(dberr));
335 }
336
337 static apr_status_t vt_db_nextkey(apr_dbm_t *dbm, apr_datum_t * pkey)
338 {
339     real_file_t *f = dbm->file;
340     DBT ckey = { 0 };
341     DBT data = { 0 };
342     int dberr;
343
344     ckey.data = pkey->dptr;
345     ckey.size = pkey->dsize;
346
347 #if DB_VER == 1
348     dberr = (*f->bdb->seq)(f->bdb, &ckey, &data, R_NEXT);
349     if (dberr == RET_SPECIAL) {
350         dberr = 0;
351         ckey.data = NULL;
352         ckey.size = 0;
353     }
354 #else
355     if (f->curs == NULL)
356         return APR_EINVAL;
357
358     dberr = (*f->curs->c_get)(f->curs, &ckey, &data, DB_NEXT);
359     if (dberr == DB_NOTFOUND) {
360         (*f->curs->c_close)(f->curs);
361         f->curs = NULL;
362         dberr = 0;
363         ckey.data = NULL;
364         ckey.size = 0;
365     }
366 #endif
367
368     pkey->dptr = ckey.data;
369     pkey->dsize = ckey.size;
370
371     /* store any error info into DBM, and return a status code. */
372     /* ### or use db2s(dberr) instead of APR_SUCCESS? */
373     return set_error(dbm, APR_SUCCESS);
374 }
375
376 static void vt_db_freedatum(apr_dbm_t *dbm, apr_datum_t data)
377 {
378     /* nothing to do */
379 }
380
381 static void vt_db_usednames(apr_pool_t *pool, const char *pathname,
382                             const char **used1, const char **used2)
383 {
384     *used1 = apr_pstrdup(pool, pathname);
385     *used2 = NULL;
386 }
387
388
389 APU_MODULE_DECLARE_DATA const apr_dbm_type_t apr_dbm_type_db = {
390     "db",
391
392     vt_db_open,
393     vt_db_close,
394     vt_db_fetch,
395     vt_db_store,
396     vt_db_del,
397     vt_db_exists,
398     vt_db_firstkey,
399     vt_db_nextkey,
400     vt_db_freedatum,
401     vt_db_usednames
402 };
403
404 #endif /* APU_HAVE_DB */