contrib/ntp/ntpdc/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # we traditionally installed software in bindir, while it should have gone
  18 # in sbindir.  Now that we offer a choice, look in the "other" installation
  19 # subdir to warn folks if there is another version there.
  20
  21
  22
  23 VPATH = @srcdir@
  24 am__is_gnu_make = { \
  25   if test -z '$(MAKELEVEL)'; then \
  26     false; \
  27   elif test -n '$(MAKE_HOST)'; then \
  28     true; \
  29   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  30     true; \
  31   else \
  32     false; \
  33   fi; \
  34 }
  35 am__make_running_with_option = \
  36   case $${target_option-} in \
  37       ?) ;; \
  38       *) echo "am__make_running_with_option: internal error: invalid" \
  39               "target option '$${target_option-}' specified" >&2; \
  40          exit 1;; \
  41   esac; \
  42   has_opt=no; \
  43   sane_makeflags=$$MAKEFLAGS; \
  44   if $(am__is_gnu_make); then \
  45     sane_makeflags=$$MFLAGS; \
  46   else \
  47     case $$MAKEFLAGS in \
  48       *\\[\ \   ]*) \
  49         bs=\\; \
  50         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  51           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  52     esac; \
  53   fi; \
  54   skip_next=no; \
  55   strip_trailopt () \
  56   { \
  57     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  58   }; \
  59   for flg in $$sane_makeflags; do \
  60     test $$skip_next = yes && { skip_next=no; continue; }; \
  61     case $$flg in \
  62       *=*|--*) continue;; \
  63         -*I) strip_trailopt 'I'; skip_next=yes;; \
  64       -*I?*) strip_trailopt 'I';; \
  65         -*O) strip_trailopt 'O'; skip_next=yes;; \
  66       -*O?*) strip_trailopt 'O';; \
  67         -*l) strip_trailopt 'l'; skip_next=yes;; \
  68       -*l?*) strip_trailopt 'l';; \
  69       -[dEDm]) skip_next=yes;; \
  70       -[JT]) skip_next=yes;; \
  71     esac; \
  72     case $$flg in \
  73       *$$target_option*) has_opt=yes; break;; \
  74     esac; \
  75   done; \
  76   test $$has_opt = yes
  77 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  78 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  79 pkgdatadir = $(datadir)/@PACKAGE@
  80 pkgincludedir = $(includedir)/@PACKAGE@
  81 pkglibdir = $(libdir)/@PACKAGE@
  82 pkglibexecdir = $(libexecdir)/@PACKAGE@
  83 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  84 install_sh_DATA = $(install_sh) -c -m 644
  85 install_sh_PROGRAM = $(install_sh) -c
  86 install_sh_SCRIPT = $(install_sh) -c
  87 INSTALL_HEADER = $(INSTALL_DATA)
  88 transform = $(program_transform_name)
  89 NORMAL_INSTALL = :
  90 PRE_INSTALL = :
  91 POST_INSTALL = :
  92 NORMAL_UNINSTALL = :
  93 PRE_UNINSTALL = :
  94 POST_UNINSTALL = :
  95 build_triplet = @build@
  96 host_triplet = @host@
  97 EXTRA_PROGRAMS = ntpdc$(EXEEXT) ntpdc-layout$(EXEEXT)
  98 subdir = ntpdc
  99 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 100 am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
 101         $(top_srcdir)/sntp/libopts/m4/stdnoreturn.m4 \
 102         $(top_srcdir)/sntp/m4/ax_c99_struct_init.m4 \
 103         $(top_srcdir)/sntp/m4/define_dir.m4 \
 104         $(top_srcdir)/sntp/m4/hms_search_lib.m4 \
 105         $(top_srcdir)/sntp/m4/libtool.m4 \
 106         $(top_srcdir)/sntp/m4/ltoptions.m4 \
 107         $(top_srcdir)/sntp/m4/ltsugar.m4 \
 108         $(top_srcdir)/sntp/m4/ltversion.m4 \
 109         $(top_srcdir)/sntp/m4/lt~obsolete.m4 \
 110         $(top_srcdir)/sntp/m4/ntp_cacheversion.m4 \
 111         $(top_srcdir)/sntp/m4/ntp_compiler.m4 \
 112         $(top_srcdir)/sntp/m4/ntp_crosscompile.m4 \
 113         $(top_srcdir)/sntp/m4/ntp_crypto_rand.m4 \
 114         $(top_srcdir)/sntp/m4/ntp_debug.m4 \
 115         $(top_srcdir)/sntp/m4/ntp_dir_sep.m4 \
 116         $(top_srcdir)/sntp/m4/ntp_facilitynames.m4 \
 117         $(top_srcdir)/sntp/m4/ntp_googletest.m4 \
 118         $(top_srcdir)/sntp/m4/ntp_ipv6.m4 \
 119         $(top_srcdir)/sntp/m4/ntp_lib_m.m4 \
 120         $(top_srcdir)/sntp/m4/ntp_libevent.m4 \
 121         $(top_srcdir)/sntp/m4/ntp_libntp.m4 \
 122         $(top_srcdir)/sntp/m4/ntp_lineeditlibs.m4 \
 123         $(top_srcdir)/sntp/m4/ntp_locinfo.m4 \
 124         $(top_srcdir)/sntp/m4/ntp_openssl.m4 \
 125         $(top_srcdir)/sntp/m4/ntp_pkg_config.m4 \
 126         $(top_srcdir)/sntp/m4/ntp_problemtests.m4 \
 127         $(top_srcdir)/sntp/m4/ntp_prog_cc.m4 \
 128         $(top_srcdir)/sntp/m4/ntp_rlimit.m4 \
 129         $(top_srcdir)/sntp/m4/ntp_sntp.m4 \
 130         $(top_srcdir)/sntp/m4/ntp_unitytest.m4 \
 131         $(top_srcdir)/sntp/m4/ntp_ver_suffix.m4 \
 132         $(top_srcdir)/sntp/m4/ntp_vpathhack.m4 \
 133         $(top_srcdir)/sntp/m4/openldap-thread-check.m4 \
 134         $(top_srcdir)/sntp/m4/openldap.m4 \
 135         $(top_srcdir)/sntp/m4/os_cflags.m4 \
 136         $(top_srcdir)/sntp/m4/snprintf.m4 \
 137         $(top_srcdir)/sntp/m4/version.m4 $(top_srcdir)/configure.ac
 138 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 139         $(ACLOCAL_M4)
 140 DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
 141         $(am__DIST_COMMON)
 142 mkinstalldirs = $(install_sh) -d
 143 CONFIG_HEADER = $(top_builddir)/config.h
 144 CONFIG_CLEAN_FILES = nl.pl
 145 CONFIG_CLEAN_VPATH_FILES =
 146 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" \
 147         "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
 148         "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"
 149 PROGRAMS = $(bin_PROGRAMS) $(libexec_PROGRAMS) $(sbin_PROGRAMS)
 150 am_ntpdc_OBJECTS = ntpdc.$(OBJEXT) ntpdc_ops.$(OBJEXT) \
 151         ntpdc-opts.$(OBJEXT)
 152 ntpdc_OBJECTS = $(am_ntpdc_OBJECTS)
 153 am__DEPENDENCIES_1 =
 154 ntpdc_DEPENDENCIES = version.o $(am__DEPENDENCIES_1) \
 155         ../libntp/libntp.a $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 156         $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 157         $(am__DEPENDENCIES_1)
 158 AM_V_lt = $(am__v_lt_@AM_V@)
 159 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 160 am__v_lt_0 = --silent
 161 am__v_lt_1 =
 162 ntpdc_layout_SOURCES = ntpdc-layout.c
 163 ntpdc_layout_OBJECTS = ntpdc-layout.$(OBJEXT)
 164 ntpdc_layout_DEPENDENCIES =
 165 AM_V_P = $(am__v_P_@AM_V@)
 166 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 167 am__v_P_0 = false
 168 am__v_P_1 = :
 169 AM_V_GEN = $(am__v_GEN_@AM_V@)
 170 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 171 am__v_GEN_0 = @echo "  GEN     " $@;
 172 am__v_GEN_1 =
 173 AM_V_at = $(am__v_at_@AM_V@)
 174 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 175 am__v_at_0 = @
 176 am__v_at_1 =
 177 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 178 depcomp = $(SHELL) $(top_srcdir)/sntp/libevent/build-aux/depcomp
 179 am__depfiles_maybe = depfiles
 180 am__mv = mv -f
 181 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 182         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 183 LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 184         $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 185         $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 186         $(AM_CFLAGS) $(CFLAGS)
 187 AM_V_CC = $(am__v_CC_@AM_V@)
 188 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 189 am__v_CC_0 = @echo "  CC      " $@;
 190 am__v_CC_1 =
 191 CCLD = $(CC)
 192 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 193         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 194         $(AM_LDFLAGS) $(LDFLAGS) -o $@
 195 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 196 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 197 am__v_CCLD_0 = @echo "  CCLD    " $@;
 198 am__v_CCLD_1 =
 199 SOURCES = $(ntpdc_SOURCES) ntpdc-layout.c
 200 DIST_SOURCES = $(ntpdc_SOURCES) ntpdc-layout.c
 201 am__can_run_installinfo = \
 202   case $$AM_UPDATE_INFO_DIR in \
 203     n|no|NO) false;; \
 204     *) (install-info --version) >/dev/null 2>&1;; \
 205   esac
 206 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 207 am__vpath_adj = case $$p in \
 208     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 209     *) f=$$p;; \
 210   esac;
 211 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 212 am__install_max = 40
 213 am__nobase_strip_setup = \
 214   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 215 am__nobase_strip = \
 216   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 217 am__nobase_list = $(am__nobase_strip_setup); \
 218   for p in $$list; do echo "$$p $$p"; done | \
 219   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 220   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 221     if (++n[$$2] == $(am__install_max)) \
 222       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 223     END { for (dir in files) print dir, files[dir] }'
 224 am__base_list = \
 225   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 226   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 227 am__uninstall_files_from_dir = { \
 228   test -z "$$files" \
 229     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 230     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 231          $(am__cd) "$$dir" && rm -f $$files; }; \
 232   }
 233 man1dir = $(mandir)/man1
 234 man8dir = $(mandir)/man8
 235 NROFF = nroff
 236 MANS = $(man1_MANS) $(man8_MANS) $(man_MANS)
 237 DATA = $(html_DATA) $(noinst_DATA)
 238 HEADERS = $(noinst_HEADERS)
 239 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 240 # Read a list of newline-separated strings from the standard input,
 241 # and print each of them once, without duplicates.  Input order is
 242 # *not* preserved.
 243 am__uniquify_input = $(AWK) '\
 244   BEGIN { nonempty = 0; } \
 245   { items[$$0] = 1; nonempty = 1; } \
 246   END { if (nonempty) { for (i in items) print i; }; } \
 247 '
 248 # Make sure the list of sources is unique.  This is necessary because,
 249 # e.g., the same source file might be shared among _SOURCES variables
 250 # for different programs/libraries.
 251 am__define_uniq_tagged_files = \
 252   list='$(am__tagged_files)'; \
 253   unique=`for i in $$list; do \
 254     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 255   done | $(am__uniquify_input)`
 256 ETAGS = etags
 257 CTAGS = ctags
 258 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/nl.pl.in \
 259         $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libopts.mf \
 260         $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf \
 261         $(top_srcdir)/sntp/check-libntp.mf \
 262         $(top_srcdir)/sntp/libevent/build-aux/depcomp README
 263 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 264 ACLOCAL = @ACLOCAL@
 265 ALLOCA = @ALLOCA@
 266 AMTAR = @AMTAR@
 267 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 268 AR = @AR@
 269 AUTOCONF = @AUTOCONF@
 270 AUTOHEADER = @AUTOHEADER@
 271 AUTOMAKE = @AUTOMAKE@
 272 AWK = @AWK@
 273 BUILD_THREAD = @BUILD_THREAD@
 274 CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
 275 CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
 276 CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
 277 CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
 278 CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
 279 CC = @CC@
 280 CCDEPMODE = @CCDEPMODE@
 281 CFLAGS = @CFLAGS@
 282 CFLAGS_LIBEVENT = @CFLAGS_LIBEVENT@
 283 CFLAGS_NTP = @CFLAGS_NTP@
 284 CHUTEST = @CHUTEST@
 285 CONFIG_SHELL = @CONFIG_SHELL@
 286 CPP = @CPP@
 287 CPPFLAGS = @CPPFLAGS@
 288 CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
 289 CPPFLAGS_NTP = @CPPFLAGS_NTP@
 290 CXX = @CXX@
 291 CXXCPP = @CXXCPP@
 292 CXXDEPMODE = @CXXDEPMODE@
 293 CXXFLAGS = @CXXFLAGS@
 294 CYGPATH_W = @CYGPATH_W@
 295 DCFD = @DCFD@
 296 DEFS = @DEFS@
 297 DEPDIR = @DEPDIR@
 298 DLLTOOL = @DLLTOOL@
 299 DSYMUTIL = @DSYMUTIL@
 300 DUMPBIN = @DUMPBIN@
 301 ECHO_C = @ECHO_C@
 302 ECHO_N = @ECHO_N@
 303 ECHO_T = @ECHO_T@
 304 EDITLINE_LIBS = @EDITLINE_LIBS@
 305 EGREP = @EGREP@
 306 EXEEXT = @EXEEXT@
 307 FGREP = @FGREP@
 308 GREP = @GREP@
 309 GTEST_CONFIG = @GTEST_CONFIG@
 310 GTEST_CPPFLAGS = @GTEST_CPPFLAGS@
 311 GTEST_CXXFLAGS = @GTEST_CXXFLAGS@
 312 GTEST_LDFLAGS = @GTEST_LDFLAGS@
 313 GTEST_LIBS = @GTEST_LIBS@
 314 HAVE_INLINE = @HAVE_INLINE@
 315 HAVE_LEAPSMEARINTERVAL = @HAVE_LEAPSMEARINTERVAL@
 316 HAVE_RLIMIT_MEMLOCK = @HAVE_RLIMIT_MEMLOCK@
 317 HAVE_RLIMIT_STACK = @HAVE_RLIMIT_STACK@
 318 INSTALL = @INSTALL@
 319 INSTALL_DATA = @INSTALL_DATA@
 320 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 321 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 322 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 323 LD = @LD@
 324 LDADD_LIBEVENT = @LDADD_LIBEVENT@
 325 LDADD_LIBNTP = @LDADD_LIBNTP@
 326 LDADD_LIBUTIL = @LDADD_LIBUTIL@
 327 LDADD_NLIST = @LDADD_NLIST@
 328 LDADD_NTP = @LDADD_NTP@
 329 LDFLAGS = @LDFLAGS@
 330 LDFLAGS_NTP = @LDFLAGS_NTP@
 331 LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
 332 LIBM = @LIBM@
 333 LIBOBJS = @LIBOBJS@
 334 LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
 335 LIBOPTS_DIR = @LIBOPTS_DIR@
 336 LIBOPTS_LDADD = @LIBOPTS_LDADD@
 337 LIBPARSE = @LIBPARSE@
 338 LIBS = @LIBS@
 339 LIBTOOL = @LIBTOOL@
 340 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 341 LIPO = @LIPO@
 342 LN_S = @LN_S@
 343 LSCF = @LSCF@
 344 LTHREAD_LIBS = @LTHREAD_LIBS@
 345 LTLIBOBJS = @LTLIBOBJS@
 346 MAKEINFO = @MAKEINFO@
 347 MAKE_ADJTIMED = @MAKE_ADJTIMED@
 348 MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
 349 MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
 350 MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
 351 MAKE_LIBPARSE = @MAKE_LIBPARSE@
 352 MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
 353 MAKE_NTPDSIM = @MAKE_NTPDSIM@
 354 MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
 355 MAKE_NTPTIME = @MAKE_NTPTIME@
 356 MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
 357 MAKE_TICKADJ = @MAKE_TICKADJ@
 358 MAKE_TIMETRIM = @MAKE_TIMETRIM@
 359 MANIFEST_TOOL = @MANIFEST_TOOL@
 360 MANTAGFMT = @MANTAGFMT@
 361 MKDIR_P = @MKDIR_P@
 362 NM = @NM@
 363 NMEDIT = @NMEDIT@
 364 NTPDATE_DB = @NTPDATE_DB@
 365 NTPDATE_DL = @NTPDATE_DL@
 366 NTPDATE_DS = @NTPDATE_DS@
 367 NTPDATE_MS = @NTPDATE_MS@
 368 NTPDATE_NI = @NTPDATE_NI@
 369 NTPDC_DB = @NTPDC_DB@
 370 NTPDC_DL = @NTPDC_DL@
 371 NTPDC_DS = @NTPDC_DS@
 372 NTPDC_MS = @NTPDC_MS@
 373 NTPDC_NI = @NTPDC_NI@
 374 NTPDSIM_DB = @NTPDSIM_DB@
 375 NTPDSIM_DL = @NTPDSIM_DL@
 376 NTPDSIM_DS = @NTPDSIM_DS@
 377 NTPDSIM_MS = @NTPDSIM_MS@
 378 NTPDSIM_NI = @NTPDSIM_NI@
 379 NTPD_DB = @NTPD_DB@
 380 NTPD_DL = @NTPD_DL@
 381 NTPD_DS = @NTPD_DS@
 382 NTPD_MS = @NTPD_MS@
 383 NTPD_NI = @NTPD_NI@
 384 NTPQ_DB = @NTPQ_DB@
 385 NTPQ_DL = @NTPQ_DL@
 386 NTPQ_DS = @NTPQ_DS@
 387 NTPQ_MS = @NTPQ_MS@
 388 NTPQ_NI = @NTPQ_NI@
 389 NTPSNMPD_DB = @NTPSNMPD_DB@
 390 NTPSNMPD_DL = @NTPSNMPD_DL@
 391 NTPSNMPD_DS = @NTPSNMPD_DS@
 392 NTPSNMPD_MS = @NTPSNMPD_MS@
 393 NTPSNMPD_NI = @NTPSNMPD_NI@
 394 NTPSWEEP_DB = @NTPSWEEP_DB@
 395 NTPSWEEP_DL = @NTPSWEEP_DL@
 396 NTPSWEEP_DS = @NTPSWEEP_DS@
 397 NTPSWEEP_MS = @NTPSWEEP_MS@
 398 NTPSWEEP_NI = @NTPSWEEP_NI@
 399 NTPTIME_DB = @NTPTIME_DB@
 400 NTPTIME_DL = @NTPTIME_DL@
 401 NTPTIME_DS = @NTPTIME_DS@
 402 NTPTIME_MS = @NTPTIME_MS@
 403 NTPTIME_NI = @NTPTIME_NI@
 404 NTPTRACE_DB = @NTPTRACE_DB@
 405 NTPTRACE_DL = @NTPTRACE_DL@
 406 NTPTRACE_DS = @NTPTRACE_DS@
 407 NTPTRACE_MS = @NTPTRACE_MS@
 408 NTPTRACE_NI = @NTPTRACE_NI@
 409 NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
 410 NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
 411 NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
 412 NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
 413 NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
 414 NTP_KEYSDIR = @NTP_KEYSDIR@
 415 NTP_WAIT_DB = @NTP_WAIT_DB@
 416 NTP_WAIT_DL = @NTP_WAIT_DL@
 417 NTP_WAIT_DS = @NTP_WAIT_DS@
 418 NTP_WAIT_MS = @NTP_WAIT_MS@
 419 NTP_WAIT_NI = @NTP_WAIT_NI@
 420 OBJDUMP = @OBJDUMP@
 421 OBJEXT = @OBJEXT@
 422 OTOOL = @OTOOL@
 423 OTOOL64 = @OTOOL64@
 424 PACKAGE = @PACKAGE@
 425 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 426 PACKAGE_NAME = @PACKAGE_NAME@
 427 PACKAGE_STRING = @PACKAGE_STRING@
 428 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 429 PACKAGE_URL = @PACKAGE_URL@
 430 PACKAGE_VERSION = @PACKAGE_VERSION@
 431 PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
 432 PATH_PERL = @PATH_PERL@
 433 PATH_RUBY = @PATH_RUBY@
 434 PATH_SEPARATOR = @PATH_SEPARATOR@
 435 PATH_TEST = @PATH_TEST@
 436 PERLLIBDIR = @PERLLIBDIR@
 437 PKG_CONFIG = @PKG_CONFIG@
 438 POSIX_SHELL = @POSIX_SHELL@
 439 PROPDELAY = @PROPDELAY@
 440 PTHREAD_LIBS = @PTHREAD_LIBS@
 441 RANLIB = @RANLIB@
 442 SED = @SED@
 443 SET_MAKE = @SET_MAKE@
 444 SHELL = @SHELL@
 445 SNMP_CFLAGS = @SNMP_CFLAGS@
 446 SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
 447 SNMP_LIBS = @SNMP_LIBS@
 448 SNTP = @SNTP@
 449 SNTP_DB = @SNTP_DB@
 450 SNTP_DL = @SNTP_DL@
 451 SNTP_DS = @SNTP_DS@
 452 SNTP_MS = @SNTP_MS@
 453 SNTP_NI = @SNTP_NI@
 454 STDNORETURN_H = @STDNORETURN_H@
 455 STRIP = @STRIP@
 456 TESTDCF = @TESTDCF@
 457 TICKADJ_DB = @TICKADJ_DB@
 458 TICKADJ_DL = @TICKADJ_DL@
 459 TICKADJ_DS = @TICKADJ_DS@
 460 TICKADJ_MS = @TICKADJ_MS@
 461 TICKADJ_NI = @TICKADJ_NI@
 462 TIMETRIM_DB = @TIMETRIM_DB@
 463 TIMETRIM_DL = @TIMETRIM_DL@
 464 TIMETRIM_DS = @TIMETRIM_DS@
 465 TIMETRIM_MS = @TIMETRIM_MS@
 466 TIMETRIM_NI = @TIMETRIM_NI@
 467 UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
 468 UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
 469 UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
 470 UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
 471 UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
 472 VERSION = @VERSION@
 473 VER_SUFFIX = @VER_SUFFIX@
 474 YACC = @YACC@
 475 YFLAGS = @YFLAGS@
 476 abs_builddir = @abs_builddir@
 477 abs_srcdir = @abs_srcdir@
 478 abs_top_builddir = @abs_top_builddir@
 479 abs_top_srcdir = @abs_top_srcdir@
 480 ac_ct_AR = @ac_ct_AR@
 481 ac_ct_CC = @ac_ct_CC@
 482 ac_ct_CXX = @ac_ct_CXX@
 483 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 484 am__include = @am__include@
 485 am__leading_dot = @am__leading_dot@
 486 am__quote = @am__quote@
 487 am__tar = @am__tar@
 488 am__untar = @am__untar@
 489 bindir = @bindir@
 490 build = @build@
 491 build_alias = @build_alias@
 492 build_cpu = @build_cpu@
 493 build_os = @build_os@
 494 build_vendor = @build_vendor@
 495 builddir = @builddir@
 496 datadir = @datadir@
 497 datarootdir = @datarootdir@
 498 docdir = @docdir@
 499 dvidir = @dvidir@
 500 exec_prefix = @exec_prefix@
 501 host = @host@
 502 host_alias = @host_alias@
 503 host_cpu = @host_cpu@
 504 host_os = @host_os@
 505 host_vendor = @host_vendor@
 506 htmldir = @htmldir@
 507 includedir = @includedir@
 508 infodir = @infodir@
 509 install_sh = @install_sh@
 510 libdir = @libdir@
 511 libexecdir = @libexecdir@
 512 localedir = @localedir@
 513 localstatedir = @localstatedir@
 514 mandir = @mandir@
 515 mkdir_p = @mkdir_p@
 516 oldincludedir = @oldincludedir@
 517 pdfdir = @pdfdir@
 518 prefix = @prefix@
 519 program_transform_name = @program_transform_name@
 520 psdir = @psdir@
 521 sbindir = @sbindir@
 522 sharedstatedir = @sharedstatedir@
 523 srcdir = @srcdir@
 524 subdirs = @subdirs@
 525 sysconfdir = @sysconfdir@
 526 target_alias = @target_alias@
 527 top_build_prefix = @top_build_prefix@
 528 top_builddir = @top_builddir@
 529 top_srcdir = @top_srcdir@
 530 NULL =
 531 bin_PROGRAMS = $(NTPDC_DB)
 532 libexec_PROGRAMS = $(NTPDC_DL)
 533 sbin_PROGRAMS = $(NTPDC_DS)
 534 EXTRA_DATA = check-layout
 535 BUILT_SOURCES = @MAKE_CHECK_LAYOUT@ ntpdc-opts.c ntpdc-opts.h \
 536         check-libopts check-libntp .deps-ver
 537 AM_CFLAGS = $(CFLAGS_NTP)
 538 AM_CPPFLAGS = $(NTP_INCS) $(LIBOPTS_CFLAGS) $(CPPFLAGS_NTP)
 539 AM_LDFLAGS = $(LDFLAGS_NTP)
 540
 541 # LDADD might need RESLIB and ADJLIB
 542 ntpdc_LDADD = version.o $(LIBOPTS_LDADD) ../libntp/libntp.a \
 543         $(LDADD_LIBNTP) $(LIBM) $(PTHREAD_LIBS) $(EDITLINE_LIBS) \
 544         $(LDADD_NTP)
 545 # ntpdc-layout doesn't need any additional libraries at all
 546 ntpdc_layout_LDADD =
 547 DISTCLEANFILES = .version version.c config.log $(man_MANS)
 548 CLEANFILES = check-layout layout.here nl.c ntpdc-layout check-libopts \
 549         check-libntp .deps-ver
 550 noinst_HEADERS = ntpdc.h
 551 ETAGS_ARGS = Makefile.am
 552 EXTRA_DIST = \
 553         invoke-ntpdc.menu       \
 554         invoke-ntpdc.texi       \
 555         layout.std              \
 556         nl_in.c                 \
 557         nl.pl                   \
 558         ntpdc-opts.def          \
 559         ntpdc.1ntpdcman         \
 560         ntpdc.1ntpdcmdoc        \
 561         ntpdc.man.in            \
 562         ntpdc.mdoc.in           \
 563         ntpdc.html              \
 564         ntpdc.texi              \
 565         $(NULL)
 566
 567 man1_MANS =
 568 man8_MANS =
 569 man_MANS = ntpdc.$(NTPDC_MS)
 570 html_DATA = \
 571         $(srcdir)/ntpdc.html            \
 572         $(NULL)
 573
 574 noinst_DATA = \
 575         $(srcdir)/invoke-ntpdc.menu     \
 576         $(srcdir)/invoke-ntpdc.texi     \
 577         $(srcdir)/ntpdc.man.in          \
 578         $(srcdir)/ntpdc.mdoc.in         \
 579         $(NULL)
 580
 581 run_ag = cd $(srcdir) &&        env PATH="$(abs_builddir):$(PATH)" AUTOGEN_DNE_DATE=-D  \
 582                 autogen -L ../sntp/include -L ../sntp/ag-tpl --writable
 583
 584 std_def_list = \
 585         $(top_srcdir)/sntp/include/debug-opt.def                \
 586         $(top_srcdir)/sntp/include/autogen-version.def          \
 587         $(top_srcdir)/sntp/include/copyright.def                \
 588         $(top_srcdir)/sntp/include/homerc.def                   \
 589         $(top_srcdir)/sntp/include/ntp.lic                      \
 590         $(top_srcdir)/sntp/include/version.def                  \
 591         $(NULL)
 592
 593 ntpdc_SOURCES = ntpdc.c ntpdc_ops.c ntpdc-opts.c ntpdc-opts.h
 594 NTP_INCS = -I$(top_srcdir)/include -I$(top_srcdir)/lib/isc/include \
 595         -I$(top_srcdir)/lib/isc/$(LIBISC_PTHREADS_NOTHREADS)/include \
 596         -I$(top_srcdir)/lib/isc/unix/include
 597 all: $(BUILT_SOURCES)
 598         $(MAKE) $(AM_MAKEFLAGS) all-am
 599
 600 .SUFFIXES:
 601 .SUFFIXES: .c .lo .o .obj
 602 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/sntp/check-libntp.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__configure_deps)
 603         @for dep in $?; do \
 604           case '$(am__configure_deps)' in \
 605             *$$dep*) \
 606               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 607                 && { if test -f $@; then exit 0; else break; fi; }; \
 608               exit 1;; \
 609           esac; \
 610         done; \
 611         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ntpdc/Makefile'; \
 612         $(am__cd) $(top_srcdir) && \
 613           $(AUTOMAKE) --foreign ntpdc/Makefile
 614 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 615         @case '$?' in \
 616           *config.status*) \
 617             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 618           *) \
 619             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 620             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 621         esac;
 622 $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/sntp/check-libntp.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__empty):
 623
 624 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 625         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 626
 627 $(top_srcdir)/configure:  $(am__configure_deps)
 628         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 629 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 630         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 631 $(am__aclocal_m4_deps):
 632 nl.pl: $(top_builddir)/config.status $(srcdir)/nl.pl.in
 633         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 634 install-binPROGRAMS: $(bin_PROGRAMS)
 635         @$(NORMAL_INSTALL)
 636         @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 637         if test -n "$$list"; then \
 638           echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
 639           $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
 640         fi; \
 641         for p in $$list; do echo "$$p $$p"; done | \
 642         sed 's/$(EXEEXT)$$//' | \
 643         while read p p1; do if test -f $$p \
 644          || test -f $$p1 \
 645           ; then echo "$$p"; echo "$$p"; else :; fi; \
 646         done | \
 647         sed -e 'p;s,.*/,,;n;h' \
 648             -e 's|.*|.|' \
 649             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 650         sed 'N;N;N;s,\n, ,g' | \
 651         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 652           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 653             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 654             else { print "f", $$3 "/" $$4, $$1; } } \
 655           END { for (d in files) print "f", d, files[d] }' | \
 656         while read type dir files; do \
 657             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 658             test -z "$$files" || { \
 659             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 660             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 661             } \
 662         ; done
 663
 664 uninstall-binPROGRAMS:
 665         @$(NORMAL_UNINSTALL)
 666         @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 667         files=`for p in $$list; do echo "$$p"; done | \
 668           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 669               -e 's/$$/$(EXEEXT)/' \
 670         `; \
 671         test -n "$$list" || exit 0; \
 672         echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
 673         cd "$(DESTDIR)$(bindir)" && rm -f $$files
 674
 675 clean-binPROGRAMS:
 676         @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
 677         echo " rm -f" $$list; \
 678         rm -f $$list || exit $$?; \
 679         test -n "$(EXEEXT)" || exit 0; \
 680         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 681         echo " rm -f" $$list; \
 682         rm -f $$list
 683 install-libexecPROGRAMS: $(libexec_PROGRAMS)
 684         @$(NORMAL_INSTALL)
 685         @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
 686         if test -n "$$list"; then \
 687           echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
 688           $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
 689         fi; \
 690         for p in $$list; do echo "$$p $$p"; done | \
 691         sed 's/$(EXEEXT)$$//' | \
 692         while read p p1; do if test -f $$p \
 693          || test -f $$p1 \
 694           ; then echo "$$p"; echo "$$p"; else :; fi; \
 695         done | \
 696         sed -e 'p;s,.*/,,;n;h' \
 697             -e 's|.*|.|' \
 698             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 699         sed 'N;N;N;s,\n, ,g' | \
 700         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 701           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 702             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 703             else { print "f", $$3 "/" $$4, $$1; } } \
 704           END { for (d in files) print "f", d, files[d] }' | \
 705         while read type dir files; do \
 706             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 707             test -z "$$files" || { \
 708             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
 709             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
 710             } \
 711         ; done
 712
 713 uninstall-libexecPROGRAMS:
 714         @$(NORMAL_UNINSTALL)
 715         @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
 716         files=`for p in $$list; do echo "$$p"; done | \
 717           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 718               -e 's/$$/$(EXEEXT)/' \
 719         `; \
 720         test -n "$$list" || exit 0; \
 721         echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
 722         cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
 723
 724 clean-libexecPROGRAMS:
 725         @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \
 726         echo " rm -f" $$list; \
 727         rm -f $$list || exit $$?; \
 728         test -n "$(EXEEXT)" || exit 0; \
 729         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 730         echo " rm -f" $$list; \
 731         rm -f $$list
 732 install-sbinPROGRAMS: $(sbin_PROGRAMS)
 733         @$(NORMAL_INSTALL)
 734         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 735         if test -n "$$list"; then \
 736           echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
 737           $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
 738         fi; \
 739         for p in $$list; do echo "$$p $$p"; done | \
 740         sed 's/$(EXEEXT)$$//' | \
 741         while read p p1; do if test -f $$p \
 742          || test -f $$p1 \
 743           ; then echo "$$p"; echo "$$p"; else :; fi; \
 744         done | \
 745         sed -e 'p;s,.*/,,;n;h' \
 746             -e 's|.*|.|' \
 747             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 748         sed 'N;N;N;s,\n, ,g' | \
 749         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 750           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 751             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 752             else { print "f", $$3 "/" $$4, $$1; } } \
 753           END { for (d in files) print "f", d, files[d] }' | \
 754         while read type dir files; do \
 755             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 756             test -z "$$files" || { \
 757             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
 758             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
 759             } \
 760         ; done
 761
 762 uninstall-sbinPROGRAMS:
 763         @$(NORMAL_UNINSTALL)
 764         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 765         files=`for p in $$list; do echo "$$p"; done | \
 766           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 767               -e 's/$$/$(EXEEXT)/' \
 768         `; \
 769         test -n "$$list" || exit 0; \
 770         echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
 771         cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 772
 773 clean-sbinPROGRAMS:
 774         @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
 775         echo " rm -f" $$list; \
 776         rm -f $$list || exit $$?; \
 777         test -n "$(EXEEXT)" || exit 0; \
 778         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 779         echo " rm -f" $$list; \
 780         rm -f $$list
 781
 782 ntpdc$(EXEEXT): $(ntpdc_OBJECTS) $(ntpdc_DEPENDENCIES) $(EXTRA_ntpdc_DEPENDENCIES)
 783         @rm -f ntpdc$(EXEEXT)
 784         $(AM_V_CCLD)$(LINK) $(ntpdc_OBJECTS) $(ntpdc_LDADD) $(LIBS)
 785
 786 ntpdc-layout$(EXEEXT): $(ntpdc_layout_OBJECTS) $(ntpdc_layout_DEPENDENCIES) $(EXTRA_ntpdc_layout_DEPENDENCIES)
 787         @rm -f ntpdc-layout$(EXEEXT)
 788         $(AM_V_CCLD)$(LINK) $(ntpdc_layout_OBJECTS) $(ntpdc_layout_LDADD) $(LIBS)
 789
 790 mostlyclean-compile:
 791         -rm -f *.$(OBJEXT)
 792
 793 distclean-compile:
 794         -rm -f *.tab.c
 795
 796 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc-layout.Po@am__quote@
 797 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc-opts.Po@am__quote@
 798 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc.Po@am__quote@
 799 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc_ops.Po@am__quote@
 800
 801 .c.o:
 802 @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 803 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 804 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 805 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 806 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 807
 808 .c.obj:
 809 @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 810 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 811 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 812 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 813 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 814
 815 .c.lo:
 816 @am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 817 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 818 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 819 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 820 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 821
 822 mostlyclean-libtool:
 823         -rm -f *.lo
 824
 825 clean-libtool:
 826         -rm -rf .libs _libs
 827 install-man1: $(man1_MANS) $(man_MANS)
 828         @$(NORMAL_INSTALL)
 829         @list1='$(man1_MANS)'; \
 830         list2='$(man_MANS)'; \
 831         test -n "$(man1dir)" \
 832           && test -n "`echo $$list1$$list2`" \
 833           || exit 0; \
 834         echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
 835         $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
 836         { for i in $$list1; do echo "$$i"; done;  \
 837         if test -n "$$list2"; then \
 838           for i in $$list2; do echo "$$i"; done \
 839             | sed -n '/\.1[a-z]*$$/p'; \
 840         fi; \
 841         } | while read p; do \
 842           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 843           echo "$$d$$p"; echo "$$p"; \
 844         done | \
 845         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 846               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 847         sed 'N;N;s,\n, ,g' | { \
 848         list=; while read file base inst; do \
 849           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 850             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 851             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 852           fi; \
 853         done; \
 854         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 855         while read files; do \
 856           test -z "$$files" || { \
 857             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 858             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 859         done; }
 860
 861 uninstall-man1:
 862         @$(NORMAL_UNINSTALL)
 863         @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
 864         files=`{ for i in $$list; do echo "$$i"; done; \
 865         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 866           sed -n '/\.1[a-z]*$$/p'; \
 867         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 868               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 869         dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 870 install-man8: $(man8_MANS) $(man_MANS)
 871         @$(NORMAL_INSTALL)
 872         @list1='$(man8_MANS)'; \
 873         list2='$(man_MANS)'; \
 874         test -n "$(man8dir)" \
 875           && test -n "`echo $$list1$$list2`" \
 876           || exit 0; \
 877         echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
 878         $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
 879         { for i in $$list1; do echo "$$i"; done;  \
 880         if test -n "$$list2"; then \
 881           for i in $$list2; do echo "$$i"; done \
 882             | sed -n '/\.8[a-z]*$$/p'; \
 883         fi; \
 884         } | while read p; do \
 885           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 886           echo "$$d$$p"; echo "$$p"; \
 887         done | \
 888         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 889               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 890         sed 'N;N;s,\n, ,g' | { \
 891         list=; while read file base inst; do \
 892           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 893             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
 894             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
 895           fi; \
 896         done; \
 897         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 898         while read files; do \
 899           test -z "$$files" || { \
 900             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
 901             $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
 902         done; }
 903
 904 uninstall-man8:
 905         @$(NORMAL_UNINSTALL)
 906         @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
 907         files=`{ for i in $$list; do echo "$$i"; done; \
 908         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 909           sed -n '/\.8[a-z]*$$/p'; \
 910         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 911               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 912         dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
 913 install-htmlDATA: $(html_DATA)
 914         @$(NORMAL_INSTALL)
 915         @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
 916         if test -n "$$list"; then \
 917           echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
 918           $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
 919         fi; \
 920         for p in $$list; do \
 921           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 922           echo "$$d$$p"; \
 923         done | $(am__base_list) | \
 924         while read files; do \
 925           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 926           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 927         done
 928
 929 uninstall-htmlDATA:
 930         @$(NORMAL_UNINSTALL)
 931         @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
 932         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 933         dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir)
 934
 935 ID: $(am__tagged_files)
 936         $(am__define_uniq_tagged_files); mkid -fID $$unique
 937 tags: tags-am
 938 TAGS: tags
 939
 940 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 941         set x; \
 942         here=`pwd`; \
 943         $(am__define_uniq_tagged_files); \
 944         shift; \
 945         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 946           test -n "$$unique" || unique=$$empty_fix; \
 947           if test $$# -gt 0; then \
 948             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 949               "$$@" $$unique; \
 950           else \
 951             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 952               $$unique; \
 953           fi; \
 954         fi
 955 ctags: ctags-am
 956
 957 CTAGS: ctags
 958 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 959         $(am__define_uniq_tagged_files); \
 960         test -z "$(CTAGS_ARGS)$$unique" \
 961           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 962              $$unique
 963
 964 GTAGS:
 965         here=`$(am__cd) $(top_builddir) && pwd` \
 966           && $(am__cd) $(top_srcdir) \
 967           && gtags -i $(GTAGS_ARGS) "$$here"
 968 cscopelist: cscopelist-am
 969
 970 cscopelist-am: $(am__tagged_files)
 971         list='$(am__tagged_files)'; \
 972         case "$(srcdir)" in \
 973           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 974           *) sdir=$(subdir)/$(srcdir) ;; \
 975         esac; \
 976         for i in $$list; do \
 977           if test -f "$$i"; then \
 978             echo "$(subdir)/$$i"; \
 979           else \
 980             echo "$$sdir/$$i"; \
 981           fi; \
 982         done >> $(top_builddir)/cscope.files
 983
 984 distclean-tags:
 985         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 986
 987 distdir: $(DISTFILES)
 988         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 989         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 990         list='$(DISTFILES)'; \
 991           dist_files=`for file in $$list; do echo $$file; done | \
 992           sed -e "s|^$$srcdirstrip/||;t" \
 993               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 994         case $$dist_files in \
 995           */*) $(MKDIR_P) `echo "$$dist_files" | \
 996                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 997                            sort -u` ;; \
 998         esac; \
 999         for file in $$dist_files; do \
1000           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1001           if test -d $$d/$$file; then \
1002             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1003             if test -d "$(distdir)/$$file"; then \
1004               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1005             fi; \
1006             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1007               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1008               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1009             fi; \
1010             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1011           else \
1012             test -f "$(distdir)/$$file" \
1013             || cp -p $$d/$$file "$(distdir)/$$file" \
1014             || exit 1; \
1015           fi; \
1016         done
1017 check-am: all-am
1018 check: $(BUILT_SOURCES)
1019         $(MAKE) $(AM_MAKEFLAGS) check-am
1020 all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
1021 installdirs:
1022         for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"; do \
1023           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1024         done
1025 install: $(BUILT_SOURCES)
1026         $(MAKE) $(AM_MAKEFLAGS) install-am
1027 install-exec: install-exec-am
1028 install-data: install-data-am
1029 uninstall: uninstall-am
1030
1031 install-am: all-am
1032         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1033
1034 installcheck: installcheck-am
1035 install-strip:
1036         if test -z '$(STRIP)'; then \
1037           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1038             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1039               install; \
1040         else \
1041           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1042             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1043             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1044         fi
1045 mostlyclean-generic:
1046
1047 clean-generic:
1048         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1049
1050 distclean-generic:
1051         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1052         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1053         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1054
1055 maintainer-clean-generic:
1056         @echo "This command is intended for maintainers to use"
1057         @echo "it deletes files that may require special tools to rebuild."
1058         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1059 clean: clean-am
1060
1061 clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
1062         clean-libtool clean-sbinPROGRAMS mostlyclean-am
1063
1064 distclean: distclean-am
1065         -rm -rf ./$(DEPDIR)
1066         -rm -f Makefile
1067 distclean-am: clean-am distclean-compile distclean-generic \
1068         distclean-tags
1069
1070 dvi: dvi-am
1071
1072 dvi-am:
1073
1074 html: html-am
1075
1076 html-am:
1077
1078 info: info-am
1079
1080 info-am:
1081
1082 install-data-am: install-data-local install-htmlDATA install-man
1083
1084 install-dvi: install-dvi-am
1085
1086 install-dvi-am:
1087
1088 install-exec-am: install-binPROGRAMS install-libexecPROGRAMS \
1089         install-sbinPROGRAMS
1090         @$(NORMAL_INSTALL)
1091         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1092 install-html: install-html-am
1093
1094 install-html-am:
1095
1096 install-info: install-info-am
1097
1098 install-info-am:
1099
1100 install-man: install-man1 install-man8
1101
1102 install-pdf: install-pdf-am
1103
1104 install-pdf-am:
1105
1106 install-ps: install-ps-am
1107
1108 install-ps-am:
1109
1110 installcheck-am:
1111
1112 maintainer-clean: maintainer-clean-am
1113         -rm -rf ./$(DEPDIR)
1114         -rm -f Makefile
1115 maintainer-clean-am: distclean-am maintainer-clean-generic
1116
1117 mostlyclean: mostlyclean-am
1118
1119 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1120         mostlyclean-libtool
1121
1122 pdf: pdf-am
1123
1124 pdf-am:
1125
1126 ps: ps-am
1127
1128 ps-am:
1129
1130 uninstall-am: uninstall-binPROGRAMS uninstall-htmlDATA \
1131         uninstall-libexecPROGRAMS uninstall-man uninstall-sbinPROGRAMS
1132
1133 uninstall-man: uninstall-man1 uninstall-man8
1134
1135 .MAKE: all check install install-am install-exec-am install-strip
1136
1137 .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
1138         clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
1139         clean-libtool clean-sbinPROGRAMS cscopelist-am ctags ctags-am \
1140         distclean distclean-compile distclean-generic \
1141         distclean-libtool distclean-tags distdir dvi dvi-am html \
1142         html-am info info-am install install-am install-binPROGRAMS \
1143         install-data install-data-am install-data-local install-dvi \
1144         install-dvi-am install-exec install-exec-am install-exec-hook \
1145         install-html install-html-am install-htmlDATA install-info \
1146         install-info-am install-libexecPROGRAMS install-man \
1147         install-man1 install-man8 install-pdf install-pdf-am \
1148         install-ps install-ps-am install-sbinPROGRAMS install-strip \
1149         installcheck installcheck-am installdirs maintainer-clean \
1150         maintainer-clean-generic mostlyclean mostlyclean-compile \
1151         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1152         tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
1153         uninstall-htmlDATA uninstall-libexecPROGRAMS uninstall-man \
1154         uninstall-man1 uninstall-man8 uninstall-sbinPROGRAMS
1155
1156 .PRECIOUS: Makefile
1157
1158
1159 install-data-local: install-html
1160
1161 $(srcdir)/ntpdc-opts.h: $(srcdir)/ntpdc-opts.c
1162         @: do-nothing action to avoid default SCCS get, .h built with .c
1163
1164 $(srcdir)/ntpdc-opts.c: $(srcdir)/ntpdc-opts.def $(std_def_list)
1165         $(run_ag) ntpdc-opts.def
1166
1167 ###
1168
1169 $(srcdir)/ntpdc.1ntpdcman: $(srcdir)/ntpdc-opts.def $(std_def_list)
1170         $(run_ag) -DMAN_SECTION=1ntpdcman -Tagman-cmd.tpl ntpdc-opts.def
1171
1172 $(srcdir)/ntpdc.man.in: $(srcdir)/ntpdc.1ntpdcman $(top_srcdir)/sntp/scripts/mansec2subst.sed
1173         sed -f $(top_srcdir)/sntp/scripts/mansec2subst.sed $(srcdir)/ntpdc.1ntpdcman > $(srcdir)/ntpdc.man.in+
1174         mv $(srcdir)/ntpdc.man.in+ $(srcdir)/ntpdc.man.in
1175
1176 ###
1177
1178 $(srcdir)/ntpdc.1ntpdcmdoc: $(srcdir)/ntpdc-opts.def $(std_def_list)
1179         $(run_ag) -DMAN_SECTION=1ntpdcmdoc -Tagmdoc-cmd.tpl ntpdc-opts.def
1180
1181 $(srcdir)/ntpdc.mdoc.in: $(srcdir)/ntpdc.1ntpdcmdoc $(top_srcdir)/sntp/scripts/mansec2subst.sed
1182         sed -f $(top_srcdir)/sntp/scripts/mansec2subst.sed $(srcdir)/ntpdc.1ntpdcmdoc > $(srcdir)/ntpdc.mdoc.in+
1183         mv $(srcdir)/ntpdc.mdoc.in+ $(srcdir)/ntpdc.mdoc.in
1184
1185 ###
1186
1187 ntpdc.$(NTPDC_MS): $(srcdir)/ntpdc.$(MANTAGFMT).in $(top_builddir)/config.status
1188         $(top_builddir)/config.status --file=ntpdc.$(NTPDC_MS)+:$(srcdir)/ntpdc.$(MANTAGFMT).in
1189         mv ntpdc.$(NTPDC_MS)+ ntpdc.$(NTPDC_MS)
1190
1191 ###
1192
1193 $(srcdir)/invoke-ntpdc.menu: $(srcdir)/invoke-ntpdc.texi
1194         @: do-nothing action to avoid default SCCS get, .menu built with .texi
1195
1196 $(srcdir)/invoke-ntpdc.texi: $(srcdir)/ntpdc-opts.def $(std_def_list)
1197         $(run_ag) -Tagtexi-cmd.tpl -DLEVEL=section ntpdc-opts.def
1198         $(top_srcdir)/scripts/build/check--help $@
1199
1200 $(srcdir)/ntpdc.html: $(srcdir)/invoke-ntpdc.menu $(srcdir)/invoke-ntpdc.texi $(srcdir)/ntpdc.texi $(top_srcdir)/sntp/include/version.texi
1201         cd $(srcdir) && ( makeinfo --force --html --no-split -I ../sntp -o ntpdc.html ntpdc.texi || true )
1202
1203 ntpdc-layout.o: nl.c
1204
1205 layout.here: ntpdc-layout
1206         ./ntpdc-layout > $@
1207
1208 check-layout: ntpdc-layout $(srcdir)/layout.std layout.here
1209         cmp $(srcdir)/layout.std layout.here && echo stamp > $@
1210
1211 $(PROGRAMS): version.o
1212
1213 $(top_srcdir)/sntp/scm-rev:
1214         cd ../sntp && $(MAKE) $(AM_MAKEFLAGS) check-scm-rev
1215
1216 version.c: $(ntpdc_OBJECTS) ../libntp/libntp.a Makefile $(top_srcdir)/sntp/scm-rev
1217         env CSET=`cat $(top_srcdir)/sntp/scm-rev` $(top_builddir)/scripts/build/mkver ntpdc
1218
1219 version.o: version.c
1220         env CCACHE_DISABLE=1 $(COMPILE) -c version.c -o version.o
1221
1222 # I ran nl_in.c (attached, to be installed into ntpdc) through
1223 # $(CC) -E nl_in.c | nl.pl > nl.c
1224 nl.c: nl_in.c nl.pl Makefile.am ../config.h ../include/ntp_request.h ntpdc.h
1225         $(CC) -E $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srcdir)/nl_in.c | ./nl.pl > nl.c
1226
1227 install-exec-hook:
1228         @test -z "${bin_PROGRAMS}${bin_SCRIPTS}"                \
1229         || for i in ${bin_PROGRAMS} ${bin_SCRIPTS} " "; do      \
1230            test ! -f ${sbindir}/$$i                             \
1231                 || echo "*** $$i is also in ${sbindir}!";       \
1232         done
1233         @test -z "${sbin_PROGRAMS}${asbin_SCRIPTS}"             \
1234         || for i in ${sbin_PROGRAMS} ${sbin_SCRIPTS} " "; do    \
1235            test ! -f ${bindir}/$$i                              \
1236                 || echo "*** $$i is also in ${bindir}!";        \
1237         done
1238
1239 #
1240
1241 check-libopts: ../sntp/libopts/libopts.la
1242         @echo stamp > $@
1243
1244 ../sntp/libopts/libopts.la:
1245         -cd ../sntp/libopts && $(MAKE) $(AM_MAKEFLAGS) libopts.la
1246
1247 check-libntp: ../libntp/libntp.a
1248         @echo stamp > $@
1249
1250 ../libntp/libntp.a:
1251         cd ../libntp && $(MAKE) $(AM_MAKEFLAGS) libntp.a
1252 $(DEPDIR)/deps-ver: $(top_srcdir)/deps-ver
1253         @[ -f $@ ] ||                                                   \
1254                 cp $(top_srcdir)/deps-ver $@
1255         @[ -w $@ ] ||                                                   \
1256                 chmod ug+w $@
1257         @cmp $(top_srcdir)/deps-ver $@ > /dev/null || (                 \
1258                 $(MAKE) $(AM_MAKEFLAGS) clean &&                                        \
1259                 echo -n "Prior $(subdir)/$(DEPDIR) version " &&         \
1260                 cat $@ &&                                               \
1261                 rm -rf $(DEPDIR) &&                                     \
1262                 mkdir $(DEPDIR) &&                                      \
1263                 case "$(top_builddir)" in                               \
1264                  .)                                                     \
1265                     ./config.status Makefile depfiles                   \
1266                     ;;                                                  \
1267                  *)                                                     \
1268                     cd "$(top_builddir)" &&                             \
1269                     ./config.status $(subdir)/Makefile depfiles &&      \
1270                     cd $(subdir)                                        \
1271                     ;;                                                  \
1272                 esac &&                                                 \
1273                 echo -n "Cleaned $(subdir)/$(DEPDIR) version " &&       \
1274                 cat $(top_srcdir)/deps-ver                              \
1275         )
1276         cp $(top_srcdir)/deps-ver $@
1277
1278 .deps-ver: $(top_srcdir)/deps-ver
1279         @[ ! -d $(DEPDIR) ] || $(MAKE) $(AM_MAKEFLAGS) $(DEPDIR)/deps-ver
1280         @touch $@
1281
1282 #
1283 # depsver.mf    included in Makefile.am for directories with .deps
1284 #
1285 # When building in the same directory with sources that change over
1286 # time, such as when tracking using bk, the .deps files can become
1287 # stale with respect to moved, deleted, or superceded headers.  Most
1288 # commonly, this would exhibit as make reporting a failure to make a
1289 # header file which is no longer in the location given.  To address
1290 # this issue, we use a deps-ver file which is updated with each change
1291 # that breaks old .deps files.  A copy of deps-ver is made into
1292 # $(DEPDIR) if not already present.  If $(DEPDIR)/deps-ver is present
1293 # with different contents than deps-ver, we make clean to ensure all
1294 # .o files built before the incompatible change are rebuilt along with
1295 # their updated .deps files, then remove $(DEPDIR) and recreate it as
1296 # empty stubs.
1297 #
1298 # It is normal when configured with --disable-dependency-tracking for
1299 # the DEPDIR to not have been created.  For this reason, we use the
1300 # intermediate target .deps-ver, which invokes make recursively if
1301 # DEPDIR exists.
1302 #
1303 # If you modify depsver.mf, please make the changes to the master
1304 # copy, the one in sntp is copied by the bootstrap script from it.
1305 #
1306 # This comment block follows rather than leads the related code so that
1307 # it stays with it in the generated Makefile.in and Makefile.
1308 #
1309
1310 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1311 # Otherwise a system limit (for SysV at least) may be exceeded.
1312 .NOEXPORT: