contrib/openpam/doc/man/Makefile.in

   1 # Makefile.in generated by automake 1.14 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # $Id: Makefile.am 720 2013-08-19 16:02:10Z des $
  18 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  19 am__make_running_with_option = \
  20   case $${target_option-} in \
  21       ?) ;; \
  22       *) echo "am__make_running_with_option: internal error: invalid" \
  23               "target option '$${target_option-}' specified" >&2; \
  24          exit 1;; \
  25   esac; \
  26   has_opt=no; \
  27   sane_makeflags=$$MAKEFLAGS; \
  28   if $(am__is_gnu_make); then \
  29     sane_makeflags=$$MFLAGS; \
  30   else \
  31     case $$MAKEFLAGS in \
  32       *\\[\ \   ]*) \
  33         bs=\\; \
  34         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  35           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  36     esac; \
  37   fi; \
  38   skip_next=no; \
  39   strip_trailopt () \
  40   { \
  41     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  42   }; \
  43   for flg in $$sane_makeflags; do \
  44     test $$skip_next = yes && { skip_next=no; continue; }; \
  45     case $$flg in \
  46       *=*|--*) continue;; \
  47         -*I) strip_trailopt 'I'; skip_next=yes;; \
  48       -*I?*) strip_trailopt 'I';; \
  49         -*O) strip_trailopt 'O'; skip_next=yes;; \
  50       -*O?*) strip_trailopt 'O';; \
  51         -*l) strip_trailopt 'l'; skip_next=yes;; \
  52       -*l?*) strip_trailopt 'l';; \
  53       -[dEDm]) skip_next=yes;; \
  54       -[JT]) skip_next=yes;; \
  55     esac; \
  56     case $$flg in \
  57       *$$target_option*) has_opt=yes; break;; \
  58     esac; \
  59   done; \
  60   test $$has_opt = yes
  61 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  62 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  63 pkgdatadir = $(datadir)/@PACKAGE@
  64 pkgincludedir = $(includedir)/@PACKAGE@
  65 pkglibdir = $(libdir)/@PACKAGE@
  66 pkglibexecdir = $(libexecdir)/@PACKAGE@
  67 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  68 install_sh_DATA = $(install_sh) -c -m 644
  69 install_sh_PROGRAM = $(install_sh) -c
  70 install_sh_SCRIPT = $(install_sh) -c
  71 INSTALL_HEADER = $(INSTALL_DATA)
  72 transform = $(program_transform_name)
  73 NORMAL_INSTALL = :
  74 PRE_INSTALL = :
  75 POST_INSTALL = :
  76 NORMAL_UNINSTALL = :
  77 PRE_UNINSTALL = :
  78 POST_UNINSTALL = :
  79 build_triplet = @build@
  80 host_triplet = @host@
  81 subdir = doc/man
  82 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  83         $(dist_man3_MANS) $(dist_man5_MANS)
  84 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  85 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  86 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  87         $(ACLOCAL_M4)
  88 mkinstalldirs = $(install_sh) -d
  89 CONFIG_HEADER = $(top_builddir)/config.h
  90 CONFIG_CLEAN_FILES =
  91 CONFIG_CLEAN_VPATH_FILES =
  92 AM_V_P = $(am__v_P_@AM_V@)
  93 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  94 am__v_P_0 = false
  95 am__v_P_1 = :
  96 AM_V_GEN = $(am__v_GEN_@AM_V@)
  97 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  98 am__v_GEN_0 = @echo "  GEN     " $@;
  99 am__v_GEN_1 =
 100 AM_V_at = $(am__v_at_@AM_V@)
 101 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 102 am__v_at_0 = @
 103 am__v_at_1 =
 104 SOURCES =
 105 DIST_SOURCES =
 106 am__can_run_installinfo = \
 107   case $$AM_UPDATE_INFO_DIR in \
 108     n|no|NO) false;; \
 109     *) (install-info --version) >/dev/null 2>&1;; \
 110   esac
 111 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 112 am__vpath_adj = case $$p in \
 113     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 114     *) f=$$p;; \
 115   esac;
 116 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 117 am__install_max = 40
 118 am__nobase_strip_setup = \
 119   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 120 am__nobase_strip = \
 121   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 122 am__nobase_list = $(am__nobase_strip_setup); \
 123   for p in $$list; do echo "$$p $$p"; done | \
 124   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 125   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 126     if (++n[$$2] == $(am__install_max)) \
 127       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 128     END { for (dir in files) print dir, files[dir] }'
 129 am__base_list = \
 130   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 131   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 132 am__uninstall_files_from_dir = { \
 133   test -z "$$files" \
 134     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 135     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 136          $(am__cd) "$$dir" && rm -f $$files; }; \
 137   }
 138 man3dir = $(mandir)/man3
 139 am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"
 140 man5dir = $(mandir)/man5
 141 NROFF = nroff
 142 MANS = $(dist_man3_MANS) $(dist_man5_MANS)
 143 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 144 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 145 VPATH = $(LIBSRCDIR) $(srcdir)
 146 ACLOCAL = @ACLOCAL@
 147 AMTAR = @AMTAR@
 148 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 149 AR = @AR@
 150 AUTOCONF = @AUTOCONF@
 151 AUTOHEADER = @AUTOHEADER@
 152 AUTOMAKE = @AUTOMAKE@
 153 AWK = @AWK@
 154 CC = @CC@
 155 CCDEPMODE = @CCDEPMODE@
 156 CFLAGS = @CFLAGS@
 157 CPP = @CPP@
 158 CPPFLAGS = @CPPFLAGS@
 159 CRYPTO_LIBS = @CRYPTO_LIBS@
 160 CRYPT_LIBS = @CRYPT_LIBS@
 161 CYGPATH_W = @CYGPATH_W@
 162 DEFS = @DEFS@
 163 DEPDIR = @DEPDIR@
 164 DLLTOOL = @DLLTOOL@
 165 DL_LIBS = @DL_LIBS@
 166 DSYMUTIL = @DSYMUTIL@
 167 DUMPBIN = @DUMPBIN@
 168 ECHO_C = @ECHO_C@
 169 ECHO_N = @ECHO_N@
 170 ECHO_T = @ECHO_T@
 171 EGREP = @EGREP@
 172 EXEEXT = @EXEEXT@
 173 FGREP = @FGREP@
 174 GREP = @GREP@
 175 INSTALL = @INSTALL@
 176 INSTALL_DATA = @INSTALL_DATA@
 177 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 178 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 179 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 180 LD = @LD@
 181 LDFLAGS = @LDFLAGS@
 182 LIBOBJS = @LIBOBJS@
 183 LIBS = @LIBS@
 184 LIBTOOL = @LIBTOOL@
 185 LIB_MAJ = @LIB_MAJ@
 186 LIPO = @LIPO@
 187 LN_S = @LN_S@
 188 LTLIBOBJS = @LTLIBOBJS@
 189 MAKEINFO = @MAKEINFO@
 190 MANIFEST_TOOL = @MANIFEST_TOOL@
 191 MKDIR_P = @MKDIR_P@
 192 NM = @NM@
 193 NMEDIT = @NMEDIT@
 194 OBJDUMP = @OBJDUMP@
 195 OBJEXT = @OBJEXT@
 196 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
 197 OTOOL = @OTOOL@
 198 OTOOL64 = @OTOOL64@
 199 PACKAGE = @PACKAGE@
 200 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 201 PACKAGE_NAME = @PACKAGE_NAME@
 202 PACKAGE_STRING = @PACKAGE_STRING@
 203 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 204 PACKAGE_URL = @PACKAGE_URL@
 205 PACKAGE_VERSION = @PACKAGE_VERSION@
 206 PATH_SEPARATOR = @PATH_SEPARATOR@
 207 RANLIB = @RANLIB@
 208 SED = @SED@
 209 SET_MAKE = @SET_MAKE@
 210 SHELL = @SHELL@
 211 STRIP = @STRIP@
 212 VERSION = @VERSION@
 213 abs_builddir = @abs_builddir@
 214 abs_srcdir = @abs_srcdir@
 215 abs_top_builddir = @abs_top_builddir@
 216 abs_top_srcdir = @abs_top_srcdir@
 217 ac_ct_AR = @ac_ct_AR@
 218 ac_ct_CC = @ac_ct_CC@
 219 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 220 am__include = @am__include@
 221 am__leading_dot = @am__leading_dot@
 222 am__quote = @am__quote@
 223 am__tar = @am__tar@
 224 am__untar = @am__untar@
 225 bindir = @bindir@
 226 build = @build@
 227 build_alias = @build_alias@
 228 build_cpu = @build_cpu@
 229 build_os = @build_os@
 230 build_vendor = @build_vendor@
 231 builddir = @builddir@
 232 datadir = @datadir@
 233 datarootdir = @datarootdir@
 234 docdir = @docdir@
 235 dvidir = @dvidir@
 236 exec_prefix = @exec_prefix@
 237 host = @host@
 238 host_alias = @host_alias@
 239 host_cpu = @host_cpu@
 240 host_os = @host_os@
 241 host_vendor = @host_vendor@
 242 htmldir = @htmldir@
 243 includedir = @includedir@
 244 infodir = @infodir@
 245 install_sh = @install_sh@
 246 libdir = @libdir@
 247 libexecdir = @libexecdir@
 248 localedir = @localedir@
 249 localstatedir = @localstatedir@
 250 mandir = @mandir@
 251 mkdir_p = @mkdir_p@
 252 oldincludedir = @oldincludedir@
 253 pdfdir = @pdfdir@
 254 prefix = @prefix@
 255 program_transform_name = @program_transform_name@
 256 psdir = @psdir@
 257 sbindir = @sbindir@
 258 sharedstatedir = @sharedstatedir@
 259 srcdir = @srcdir@
 260 sysconfdir = @sysconfdir@
 261 target_alias = @target_alias@
 262 top_build_prefix = @top_build_prefix@
 263 top_builddir = @top_builddir@
 264 top_srcdir = @top_srcdir@
 265 NULL =
 266
 267 # Standard PAM API
 268 PMAN = \
 269         pam_acct_mgmt.3 \
 270         pam_authenticate.3 \
 271         pam_chauthtok.3 \
 272         pam_close_session.3 \
 273         pam_end.3 \
 274         pam_get_data.3 \
 275         pam_get_item.3 \
 276         pam_get_user.3 \
 277         pam_getenv.3 \
 278         pam_getenvlist.3 \
 279         pam_open_session.3 \
 280         pam_putenv.3 \
 281         pam_set_data.3 \
 282         pam_set_item.3 \
 283         pam_setcred.3 \
 284         pam_start.3 \
 285         pam_strerror.3 \
 286         $(NULL)
 287
 288
 289 # Standard module API
 290 MMAN = \
 291         pam_sm_acct_mgmt.3 \
 292         pam_sm_authenticate.3 \
 293         pam_sm_chauthtok.3 \
 294         pam_sm_close_session.3 \
 295         pam_sm_open_session.3 \
 296         pam_sm_setcred.3 \
 297         $(NULL)
 298
 299
 300 # OpenPAM extensions
 301 OMAN = \
 302         openpam_borrow_cred.3 \
 303         openpam_free_data.3 \
 304         openpam_free_envlist.3 \
 305         openpam_get_feature.3 \
 306         openpam_get_option.3 \
 307         openpam_log.3 \
 308         openpam_nullconv.3 \
 309         openpam_readline.3 \
 310         openpam_readlinev.3 \
 311         openpam_readword.3 \
 312         openpam_restore_cred.3 \
 313         openpam_set_feature.3 \
 314         openpam_set_option.3 \
 315         openpam_straddch.3 \
 316         openpam_subst.3 \
 317         openpam_ttyconv.3 \
 318         pam_error.3 \
 319         pam_get_authtok.3 \
 320         pam_info.3 \
 321         pam_prompt.3 \
 322         pam_setenv.3 \
 323         pam_verror.3 \
 324         pam_vinfo.3 \
 325         pam_vprompt.3 \
 326         $(NULL)
 327
 328 EXTRA_DIST = openpam.man pam.man
 329 ALLCMAN = $(PMAN) $(MMAN) $(OMAN)
 330 GENMAN = $(ALLCMAN) openpam.3 pam.3
 331 dist_man3_MANS = $(GENMAN) pam_conv.3
 332 dist_man5_MANS = pam.conf.5
 333 CLEANFILES = $(GENMAN)
 334 GENDOC = $(top_srcdir)/misc/gendoc.pl
 335 LIBSRCDIR = $(top_srcdir)/lib/libpam
 336 SUFFIXES = .3
 337 all: all-am
 338
 339 .SUFFIXES:
 340 .SUFFIXES: .3 .c
 341 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 342         @for dep in $?; do \
 343           case '$(am__configure_deps)' in \
 344             *$$dep*) \
 345               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 346                 && { if test -f $@; then exit 0; else break; fi; }; \
 347               exit 1;; \
 348           esac; \
 349         done; \
 350         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/Makefile'; \
 351         $(am__cd) $(top_srcdir) && \
 352           $(AUTOMAKE) --foreign doc/man/Makefile
 353 .PRECIOUS: Makefile
 354 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 355         @case '$?' in \
 356           *config.status*) \
 357             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 358           *) \
 359             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 360             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 361         esac;
 362
 363 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 364         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 365
 366 $(top_srcdir)/configure:  $(am__configure_deps)
 367         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 368 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 369         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 370 $(am__aclocal_m4_deps):
 371
 372 mostlyclean-libtool:
 373         -rm -f *.lo
 374
 375 clean-libtool:
 376         -rm -rf .libs _libs
 377 install-man3: $(dist_man3_MANS)
 378         @$(NORMAL_INSTALL)
 379         @list1='$(dist_man3_MANS)'; \
 380         list2=''; \
 381         test -n "$(man3dir)" \
 382           && test -n "`echo $$list1$$list2`" \
 383           || exit 0; \
 384         echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
 385         $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
 386         { for i in $$list1; do echo "$$i"; done;  \
 387         if test -n "$$list2"; then \
 388           for i in $$list2; do echo "$$i"; done \
 389             | sed -n '/\.3[a-z]*$$/p'; \
 390         fi; \
 391         } | while read p; do \
 392           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 393           echo "$$d$$p"; echo "$$p"; \
 394         done | \
 395         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 396               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 397         sed 'N;N;s,\n, ,g' | { \
 398         list=; while read file base inst; do \
 399           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 400             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
 401             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
 402           fi; \
 403         done; \
 404         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 405         while read files; do \
 406           test -z "$$files" || { \
 407             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
 408             $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
 409         done; }
 410
 411 uninstall-man3:
 412         @$(NORMAL_UNINSTALL)
 413         @list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \
 414         files=`{ for i in $$list; do echo "$$i"; done; \
 415         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 416               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 417         dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
 418 install-man5: $(dist_man5_MANS)
 419         @$(NORMAL_INSTALL)
 420         @list1='$(dist_man5_MANS)'; \
 421         list2=''; \
 422         test -n "$(man5dir)" \
 423           && test -n "`echo $$list1$$list2`" \
 424           || exit 0; \
 425         echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
 426         $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
 427         { for i in $$list1; do echo "$$i"; done;  \
 428         if test -n "$$list2"; then \
 429           for i in $$list2; do echo "$$i"; done \
 430             | sed -n '/\.5[a-z]*$$/p'; \
 431         fi; \
 432         } | while read p; do \
 433           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 434           echo "$$d$$p"; echo "$$p"; \
 435         done | \
 436         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 437               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 438         sed 'N;N;s,\n, ,g' | { \
 439         list=; while read file base inst; do \
 440           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 441             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
 442             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
 443           fi; \
 444         done; \
 445         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 446         while read files; do \
 447           test -z "$$files" || { \
 448             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
 449             $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
 450         done; }
 451
 452 uninstall-man5:
 453         @$(NORMAL_UNINSTALL)
 454         @list='$(dist_man5_MANS)'; test -n "$(man5dir)" || exit 0; \
 455         files=`{ for i in $$list; do echo "$$i"; done; \
 456         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 457               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 458         dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
 459 tags TAGS:
 460
 461 ctags CTAGS:
 462
 463 cscope cscopelist:
 464
 465
 466 distdir: $(DISTFILES)
 467         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 468         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 469         list='$(DISTFILES)'; \
 470           dist_files=`for file in $$list; do echo $$file; done | \
 471           sed -e "s|^$$srcdirstrip/||;t" \
 472               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 473         case $$dist_files in \
 474           */*) $(MKDIR_P) `echo "$$dist_files" | \
 475                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 476                            sort -u` ;; \
 477         esac; \
 478         for file in $$dist_files; do \
 479           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 480           if test -d $$d/$$file; then \
 481             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 482             if test -d "$(distdir)/$$file"; then \
 483               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 484             fi; \
 485             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 486               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 487               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 488             fi; \
 489             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 490           else \
 491             test -f "$(distdir)/$$file" \
 492             || cp -p $$d/$$file "$(distdir)/$$file" \
 493             || exit 1; \
 494           fi; \
 495         done
 496 check-am: all-am
 497 check: check-am
 498 all-am: Makefile $(MANS)
 499 installdirs:
 500         for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
 501           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 502         done
 503 install: install-am
 504 install-exec: install-exec-am
 505 install-data: install-data-am
 506 uninstall: uninstall-am
 507
 508 install-am: all-am
 509         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 510
 511 installcheck: installcheck-am
 512 install-strip:
 513         if test -z '$(STRIP)'; then \
 514           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 515             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 516               install; \
 517         else \
 518           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 519             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 520             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 521         fi
 522 mostlyclean-generic:
 523
 524 clean-generic:
 525         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 526
 527 distclean-generic:
 528         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 529         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 530
 531 maintainer-clean-generic:
 532         @echo "This command is intended for maintainers to use"
 533         @echo "it deletes files that may require special tools to rebuild."
 534 clean: clean-am
 535
 536 clean-am: clean-generic clean-libtool mostlyclean-am
 537
 538 distclean: distclean-am
 539         -rm -f Makefile
 540 distclean-am: clean-am distclean-generic
 541
 542 dvi: dvi-am
 543
 544 dvi-am:
 545
 546 html: html-am
 547
 548 html-am:
 549
 550 info: info-am
 551
 552 info-am:
 553
 554 install-data-am: install-man
 555
 556 install-dvi: install-dvi-am
 557
 558 install-dvi-am:
 559
 560 install-exec-am:
 561
 562 install-html: install-html-am
 563
 564 install-html-am:
 565
 566 install-info: install-info-am
 567
 568 install-info-am:
 569
 570 install-man: install-man3 install-man5
 571
 572 install-pdf: install-pdf-am
 573
 574 install-pdf-am:
 575
 576 install-ps: install-ps-am
 577
 578 install-ps-am:
 579
 580 installcheck-am:
 581
 582 maintainer-clean: maintainer-clean-am
 583         -rm -f Makefile
 584 maintainer-clean-am: distclean-am maintainer-clean-generic
 585
 586 mostlyclean: mostlyclean-am
 587
 588 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 589
 590 pdf: pdf-am
 591
 592 pdf-am:
 593
 594 ps: ps-am
 595
 596 ps-am:
 597
 598 uninstall-am: uninstall-man
 599
 600 uninstall-man: uninstall-man3 uninstall-man5
 601
 602 .MAKE: install-am install-strip
 603
 604 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 605         cscopelist-am ctags-am distclean distclean-generic \
 606         distclean-libtool distdir dvi dvi-am html html-am info info-am \
 607         install install-am install-data install-data-am install-dvi \
 608         install-dvi-am install-exec install-exec-am install-html \
 609         install-html-am install-info install-info-am install-man \
 610         install-man3 install-man5 install-pdf install-pdf-am \
 611         install-ps install-ps-am install-strip installcheck \
 612         installcheck-am installdirs maintainer-clean \
 613         maintainer-clean-generic mostlyclean mostlyclean-generic \
 614         mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
 615         uninstall-am uninstall-man uninstall-man3 uninstall-man5
 616
 617
 618 .c.3: $(GENDOC)
 619         perl -w $(GENDOC) $< || rm $@
 620
 621 openpam.3: $(OPENPAM_MAN) $(GENDOC) $(srcdir)/openpam.man
 622         perl -w $(GENDOC) -o $(OPENPAM_MAN) <$(srcdir)/openpam.man || rm $@
 623
 624 pam.3: $(PAM_MAN) $(GENDOC) $(srcdir)/pam.man
 625         perl -w $(GENDOC) -p $(PAM_MAN) <$(srcdir)/pam.man || rm $@
 626
 627 $(GENMAN): $(GENDOC)
 628
 629 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 630 # Otherwise a system limit (for SysV at least) may be exceeded.
 631 .NOEXPORT: