contrib/openpam/include/Makefile.in

   1 # Makefile.in generated by automake 1.14 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # $Id: Makefile.am 648 2013-03-05 17:54:27Z des $
  18 VPATH = @srcdir@
  19 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  20 am__make_running_with_option = \
  21   case $${target_option-} in \
  22       ?) ;; \
  23       *) echo "am__make_running_with_option: internal error: invalid" \
  24               "target option '$${target_option-}' specified" >&2; \
  25          exit 1;; \
  26   esac; \
  27   has_opt=no; \
  28   sane_makeflags=$$MAKEFLAGS; \
  29   if $(am__is_gnu_make); then \
  30     sane_makeflags=$$MFLAGS; \
  31   else \
  32     case $$MAKEFLAGS in \
  33       *\\[\ \   ]*) \
  34         bs=\\; \
  35         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  36           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  37     esac; \
  38   fi; \
  39   skip_next=no; \
  40   strip_trailopt () \
  41   { \
  42     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  43   }; \
  44   for flg in $$sane_makeflags; do \
  45     test $$skip_next = yes && { skip_next=no; continue; }; \
  46     case $$flg in \
  47       *=*|--*) continue;; \
  48         -*I) strip_trailopt 'I'; skip_next=yes;; \
  49       -*I?*) strip_trailopt 'I';; \
  50         -*O) strip_trailopt 'O'; skip_next=yes;; \
  51       -*O?*) strip_trailopt 'O';; \
  52         -*l) strip_trailopt 'l'; skip_next=yes;; \
  53       -*l?*) strip_trailopt 'l';; \
  54       -[dEDm]) skip_next=yes;; \
  55       -[JT]) skip_next=yes;; \
  56     esac; \
  57     case $$flg in \
  58       *$$target_option*) has_opt=yes; break;; \
  59     esac; \
  60   done; \
  61   test $$has_opt = yes
  62 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  63 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  64 pkgdatadir = $(datadir)/@PACKAGE@
  65 pkgincludedir = $(includedir)/@PACKAGE@
  66 pkglibdir = $(libdir)/@PACKAGE@
  67 pkglibexecdir = $(libexecdir)/@PACKAGE@
  68 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  69 install_sh_DATA = $(install_sh) -c -m 644
  70 install_sh_PROGRAM = $(install_sh) -c
  71 install_sh_SCRIPT = $(install_sh) -c
  72 INSTALL_HEADER = $(INSTALL_DATA)
  73 transform = $(program_transform_name)
  74 NORMAL_INSTALL = :
  75 PRE_INSTALL = :
  76 POST_INSTALL = :
  77 NORMAL_UNINSTALL = :
  78 PRE_UNINSTALL = :
  79 POST_UNINSTALL = :
  80 build_triplet = @build@
  81 host_triplet = @host@
  82 subdir = include
  83 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
  84 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  85 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  86 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  87         $(ACLOCAL_M4)
  88 mkinstalldirs = $(install_sh) -d
  89 CONFIG_HEADER = $(top_builddir)/config.h
  90 CONFIG_CLEAN_FILES =
  91 CONFIG_CLEAN_VPATH_FILES =
  92 AM_V_P = $(am__v_P_@AM_V@)
  93 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  94 am__v_P_0 = false
  95 am__v_P_1 = :
  96 AM_V_GEN = $(am__v_GEN_@AM_V@)
  97 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
  98 am__v_GEN_0 = @echo "  GEN     " $@;
  99 am__v_GEN_1 =
 100 AM_V_at = $(am__v_at_@AM_V@)
 101 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 102 am__v_at_0 = @
 103 am__v_at_1 =
 104 SOURCES =
 105 DIST_SOURCES =
 106 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 107         ctags-recursive dvi-recursive html-recursive info-recursive \
 108         install-data-recursive install-dvi-recursive \
 109         install-exec-recursive install-html-recursive \
 110         install-info-recursive install-pdf-recursive \
 111         install-ps-recursive install-recursive installcheck-recursive \
 112         installdirs-recursive pdf-recursive ps-recursive \
 113         tags-recursive uninstall-recursive
 114 am__can_run_installinfo = \
 115   case $$AM_UPDATE_INFO_DIR in \
 116     n|no|NO) false;; \
 117     *) (install-info --version) >/dev/null 2>&1;; \
 118   esac
 119 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 120   distclean-recursive maintainer-clean-recursive
 121 am__recursive_targets = \
 122   $(RECURSIVE_TARGETS) \
 123   $(RECURSIVE_CLEAN_TARGETS) \
 124   $(am__extra_recursive_targets)
 125 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 126         distdir
 127 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 128 # Read a list of newline-separated strings from the standard input,
 129 # and print each of them once, without duplicates.  Input order is
 130 # *not* preserved.
 131 am__uniquify_input = $(AWK) '\
 132   BEGIN { nonempty = 0; } \
 133   { items[$$0] = 1; nonempty = 1; } \
 134   END { if (nonempty) { for (i in items) print i; }; } \
 135 '
 136 # Make sure the list of sources is unique.  This is necessary because,
 137 # e.g., the same source file might be shared among _SOURCES variables
 138 # for different programs/libraries.
 139 am__define_uniq_tagged_files = \
 140   list='$(am__tagged_files)'; \
 141   unique=`for i in $$list; do \
 142     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 143   done | $(am__uniquify_input)`
 144 ETAGS = etags
 145 CTAGS = ctags
 146 DIST_SUBDIRS = $(SUBDIRS)
 147 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 148 am__relativize = \
 149   dir0=`pwd`; \
 150   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 151   sed_rest='s,^[^/]*/*,,'; \
 152   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 153   sed_butlast='s,/*[^/]*$$,,'; \
 154   while test -n "$$dir1"; do \
 155     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 156     if test "$$first" != "."; then \
 157       if test "$$first" = ".."; then \
 158         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 159         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 160       else \
 161         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 162         if test "$$first2" = "$$first"; then \
 163           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 164         else \
 165           dir2="../$$dir2"; \
 166         fi; \
 167         dir0="$$dir0"/"$$first"; \
 168       fi; \
 169     fi; \
 170     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 171   done; \
 172   reldir="$$dir2"
 173 ACLOCAL = @ACLOCAL@
 174 AMTAR = @AMTAR@
 175 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 176 AR = @AR@
 177 AUTOCONF = @AUTOCONF@
 178 AUTOHEADER = @AUTOHEADER@
 179 AUTOMAKE = @AUTOMAKE@
 180 AWK = @AWK@
 181 CC = @CC@
 182 CCDEPMODE = @CCDEPMODE@
 183 CFLAGS = @CFLAGS@
 184 CPP = @CPP@
 185 CPPFLAGS = @CPPFLAGS@
 186 CRYPTO_LIBS = @CRYPTO_LIBS@
 187 CRYPT_LIBS = @CRYPT_LIBS@
 188 CYGPATH_W = @CYGPATH_W@
 189 DEFS = @DEFS@
 190 DEPDIR = @DEPDIR@
 191 DLLTOOL = @DLLTOOL@
 192 DL_LIBS = @DL_LIBS@
 193 DSYMUTIL = @DSYMUTIL@
 194 DUMPBIN = @DUMPBIN@
 195 ECHO_C = @ECHO_C@
 196 ECHO_N = @ECHO_N@
 197 ECHO_T = @ECHO_T@
 198 EGREP = @EGREP@
 199 EXEEXT = @EXEEXT@
 200 FGREP = @FGREP@
 201 GREP = @GREP@
 202 INSTALL = @INSTALL@
 203 INSTALL_DATA = @INSTALL_DATA@
 204 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 205 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 206 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 207 LD = @LD@
 208 LDFLAGS = @LDFLAGS@
 209 LIBOBJS = @LIBOBJS@
 210 LIBS = @LIBS@
 211 LIBTOOL = @LIBTOOL@
 212 LIB_MAJ = @LIB_MAJ@
 213 LIPO = @LIPO@
 214 LN_S = @LN_S@
 215 LTLIBOBJS = @LTLIBOBJS@
 216 MAKEINFO = @MAKEINFO@
 217 MANIFEST_TOOL = @MANIFEST_TOOL@
 218 MKDIR_P = @MKDIR_P@
 219 NM = @NM@
 220 NMEDIT = @NMEDIT@
 221 OBJDUMP = @OBJDUMP@
 222 OBJEXT = @OBJEXT@
 223 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
 224 OTOOL = @OTOOL@
 225 OTOOL64 = @OTOOL64@
 226 PACKAGE = @PACKAGE@
 227 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 228 PACKAGE_NAME = @PACKAGE_NAME@
 229 PACKAGE_STRING = @PACKAGE_STRING@
 230 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 231 PACKAGE_URL = @PACKAGE_URL@
 232 PACKAGE_VERSION = @PACKAGE_VERSION@
 233 PATH_SEPARATOR = @PATH_SEPARATOR@
 234 RANLIB = @RANLIB@
 235 SED = @SED@
 236 SET_MAKE = @SET_MAKE@
 237 SHELL = @SHELL@
 238 STRIP = @STRIP@
 239 VERSION = @VERSION@
 240 abs_builddir = @abs_builddir@
 241 abs_srcdir = @abs_srcdir@
 242 abs_top_builddir = @abs_top_builddir@
 243 abs_top_srcdir = @abs_top_srcdir@
 244 ac_ct_AR = @ac_ct_AR@
 245 ac_ct_CC = @ac_ct_CC@
 246 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 247 am__include = @am__include@
 248 am__leading_dot = @am__leading_dot@
 249 am__quote = @am__quote@
 250 am__tar = @am__tar@
 251 am__untar = @am__untar@
 252 bindir = @bindir@
 253 build = @build@
 254 build_alias = @build_alias@
 255 build_cpu = @build_cpu@
 256 build_os = @build_os@
 257 build_vendor = @build_vendor@
 258 builddir = @builddir@
 259 datadir = @datadir@
 260 datarootdir = @datarootdir@
 261 docdir = @docdir@
 262 dvidir = @dvidir@
 263 exec_prefix = @exec_prefix@
 264 host = @host@
 265 host_alias = @host_alias@
 266 host_cpu = @host_cpu@
 267 host_os = @host_os@
 268 host_vendor = @host_vendor@
 269 htmldir = @htmldir@
 270 includedir = @includedir@
 271 infodir = @infodir@
 272 install_sh = @install_sh@
 273 libdir = @libdir@
 274 libexecdir = @libexecdir@
 275 localedir = @localedir@
 276 localstatedir = @localstatedir@
 277 mandir = @mandir@
 278 mkdir_p = @mkdir_p@
 279 oldincludedir = @oldincludedir@
 280 pdfdir = @pdfdir@
 281 prefix = @prefix@
 282 program_transform_name = @program_transform_name@
 283 psdir = @psdir@
 284 sbindir = @sbindir@
 285 sharedstatedir = @sharedstatedir@
 286 srcdir = @srcdir@
 287 sysconfdir = @sysconfdir@
 288 target_alias = @target_alias@
 289 top_build_prefix = @top_build_prefix@
 290 top_builddir = @top_builddir@
 291 top_srcdir = @top_srcdir@
 292 SUBDIRS = security
 293 all: all-recursive
 294
 295 .SUFFIXES:
 296 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 297         @for dep in $?; do \
 298           case '$(am__configure_deps)' in \
 299             *$$dep*) \
 300               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 301                 && { if test -f $@; then exit 0; else break; fi; }; \
 302               exit 1;; \
 303           esac; \
 304         done; \
 305         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
 306         $(am__cd) $(top_srcdir) && \
 307           $(AUTOMAKE) --foreign include/Makefile
 308 .PRECIOUS: Makefile
 309 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 310         @case '$?' in \
 311           *config.status*) \
 312             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 313           *) \
 314             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 315             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 316         esac;
 317
 318 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 319         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 320
 321 $(top_srcdir)/configure:  $(am__configure_deps)
 322         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 323 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 324         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 325 $(am__aclocal_m4_deps):
 326
 327 mostlyclean-libtool:
 328         -rm -f *.lo
 329
 330 clean-libtool:
 331         -rm -rf .libs _libs
 332
 333 # This directory's subdirectories are mostly independent; you can cd
 334 # into them and run 'make' without going through this Makefile.
 335 # To change the values of 'make' variables: instead of editing Makefiles,
 336 # (1) if the variable is set in 'config.status', edit 'config.status'
 337 #     (which will cause the Makefiles to be regenerated when you run 'make');
 338 # (2) otherwise, pass the desired values on the 'make' command line.
 339 $(am__recursive_targets):
 340         @fail=; \
 341         if $(am__make_keepgoing); then \
 342           failcom='fail=yes'; \
 343         else \
 344           failcom='exit 1'; \
 345         fi; \
 346         dot_seen=no; \
 347         target=`echo $@ | sed s/-recursive//`; \
 348         case "$@" in \
 349           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 350           *) list='$(SUBDIRS)' ;; \
 351         esac; \
 352         for subdir in $$list; do \
 353           echo "Making $$target in $$subdir"; \
 354           if test "$$subdir" = "."; then \
 355             dot_seen=yes; \
 356             local_target="$$target-am"; \
 357           else \
 358             local_target="$$target"; \
 359           fi; \
 360           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 361           || eval $$failcom; \
 362         done; \
 363         if test "$$dot_seen" = "no"; then \
 364           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 365         fi; test -z "$$fail"
 366
 367 ID: $(am__tagged_files)
 368         $(am__define_uniq_tagged_files); mkid -fID $$unique
 369 tags: tags-recursive
 370 TAGS: tags
 371
 372 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 373         set x; \
 374         here=`pwd`; \
 375         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 376           include_option=--etags-include; \
 377           empty_fix=.; \
 378         else \
 379           include_option=--include; \
 380           empty_fix=; \
 381         fi; \
 382         list='$(SUBDIRS)'; for subdir in $$list; do \
 383           if test "$$subdir" = .; then :; else \
 384             test ! -f $$subdir/TAGS || \
 385               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 386           fi; \
 387         done; \
 388         $(am__define_uniq_tagged_files); \
 389         shift; \
 390         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 391           test -n "$$unique" || unique=$$empty_fix; \
 392           if test $$# -gt 0; then \
 393             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 394               "$$@" $$unique; \
 395           else \
 396             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 397               $$unique; \
 398           fi; \
 399         fi
 400 ctags: ctags-recursive
 401
 402 CTAGS: ctags
 403 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 404         $(am__define_uniq_tagged_files); \
 405         test -z "$(CTAGS_ARGS)$$unique" \
 406           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 407              $$unique
 408
 409 GTAGS:
 410         here=`$(am__cd) $(top_builddir) && pwd` \
 411           && $(am__cd) $(top_srcdir) \
 412           && gtags -i $(GTAGS_ARGS) "$$here"
 413 cscopelist: cscopelist-recursive
 414
 415 cscopelist-am: $(am__tagged_files)
 416         list='$(am__tagged_files)'; \
 417         case "$(srcdir)" in \
 418           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 419           *) sdir=$(subdir)/$(srcdir) ;; \
 420         esac; \
 421         for i in $$list; do \
 422           if test -f "$$i"; then \
 423             echo "$(subdir)/$$i"; \
 424           else \
 425             echo "$$sdir/$$i"; \
 426           fi; \
 427         done >> $(top_builddir)/cscope.files
 428
 429 distclean-tags:
 430         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 431
 432 distdir: $(DISTFILES)
 433         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 434         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 435         list='$(DISTFILES)'; \
 436           dist_files=`for file in $$list; do echo $$file; done | \
 437           sed -e "s|^$$srcdirstrip/||;t" \
 438               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 439         case $$dist_files in \
 440           */*) $(MKDIR_P) `echo "$$dist_files" | \
 441                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 442                            sort -u` ;; \
 443         esac; \
 444         for file in $$dist_files; do \
 445           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 446           if test -d $$d/$$file; then \
 447             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 448             if test -d "$(distdir)/$$file"; then \
 449               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 450             fi; \
 451             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 452               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 453               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 454             fi; \
 455             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 456           else \
 457             test -f "$(distdir)/$$file" \
 458             || cp -p $$d/$$file "$(distdir)/$$file" \
 459             || exit 1; \
 460           fi; \
 461         done
 462         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 463           if test "$$subdir" = .; then :; else \
 464             $(am__make_dryrun) \
 465               || test -d "$(distdir)/$$subdir" \
 466               || $(MKDIR_P) "$(distdir)/$$subdir" \
 467               || exit 1; \
 468             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 469             $(am__relativize); \
 470             new_distdir=$$reldir; \
 471             dir1=$$subdir; dir2="$(top_distdir)"; \
 472             $(am__relativize); \
 473             new_top_distdir=$$reldir; \
 474             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 475             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 476             ($(am__cd) $$subdir && \
 477               $(MAKE) $(AM_MAKEFLAGS) \
 478                 top_distdir="$$new_top_distdir" \
 479                 distdir="$$new_distdir" \
 480                 am__remove_distdir=: \
 481                 am__skip_length_check=: \
 482                 am__skip_mode_fix=: \
 483                 distdir) \
 484               || exit 1; \
 485           fi; \
 486         done
 487 check-am: all-am
 488 check: check-recursive
 489 all-am: Makefile
 490 installdirs: installdirs-recursive
 491 installdirs-am:
 492 install: install-recursive
 493 install-exec: install-exec-recursive
 494 install-data: install-data-recursive
 495 uninstall: uninstall-recursive
 496
 497 install-am: all-am
 498         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 499
 500 installcheck: installcheck-recursive
 501 install-strip:
 502         if test -z '$(STRIP)'; then \
 503           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 504             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 505               install; \
 506         else \
 507           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 508             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 509             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 510         fi
 511 mostlyclean-generic:
 512
 513 clean-generic:
 514
 515 distclean-generic:
 516         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 517         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 518
 519 maintainer-clean-generic:
 520         @echo "This command is intended for maintainers to use"
 521         @echo "it deletes files that may require special tools to rebuild."
 522 clean: clean-recursive
 523
 524 clean-am: clean-generic clean-libtool mostlyclean-am
 525
 526 distclean: distclean-recursive
 527         -rm -f Makefile
 528 distclean-am: clean-am distclean-generic distclean-tags
 529
 530 dvi: dvi-recursive
 531
 532 dvi-am:
 533
 534 html: html-recursive
 535
 536 html-am:
 537
 538 info: info-recursive
 539
 540 info-am:
 541
 542 install-data-am:
 543
 544 install-dvi: install-dvi-recursive
 545
 546 install-dvi-am:
 547
 548 install-exec-am:
 549
 550 install-html: install-html-recursive
 551
 552 install-html-am:
 553
 554 install-info: install-info-recursive
 555
 556 install-info-am:
 557
 558 install-man:
 559
 560 install-pdf: install-pdf-recursive
 561
 562 install-pdf-am:
 563
 564 install-ps: install-ps-recursive
 565
 566 install-ps-am:
 567
 568 installcheck-am:
 569
 570 maintainer-clean: maintainer-clean-recursive
 571         -rm -f Makefile
 572 maintainer-clean-am: distclean-am maintainer-clean-generic
 573
 574 mostlyclean: mostlyclean-recursive
 575
 576 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 577
 578 pdf: pdf-recursive
 579
 580 pdf-am:
 581
 582 ps: ps-recursive
 583
 584 ps-am:
 585
 586 uninstall-am:
 587
 588 .MAKE: $(am__recursive_targets) install-am install-strip
 589
 590 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
 591         check-am clean clean-generic clean-libtool cscopelist-am ctags \
 592         ctags-am distclean distclean-generic distclean-libtool \
 593         distclean-tags distdir dvi dvi-am html html-am info info-am \
 594         install install-am install-data install-data-am install-dvi \
 595         install-dvi-am install-exec install-exec-am install-html \
 596         install-html-am install-info install-info-am install-man \
 597         install-pdf install-pdf-am install-ps install-ps-am \
 598         install-strip installcheck installcheck-am installdirs \
 599         installdirs-am maintainer-clean maintainer-clean-generic \
 600         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 601         ps ps-am tags tags-am uninstall uninstall-am
 602
 603
 604 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 605 # Otherwise a system limit (for SysV at least) may be exceeded.
 606 .NOEXPORT: