contrib/openpam/t/Makefile.in

   1 # Makefile.in generated by automake 1.14 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # $Id: Makefile.am 763 2014-02-26 16:29:16Z des $
  18
  19 VPATH = @srcdir@
  20 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  21 am__make_running_with_option = \
  22   case $${target_option-} in \
  23       ?) ;; \
  24       *) echo "am__make_running_with_option: internal error: invalid" \
  25               "target option '$${target_option-}' specified" >&2; \
  26          exit 1;; \
  27   esac; \
  28   has_opt=no; \
  29   sane_makeflags=$$MAKEFLAGS; \
  30   if $(am__is_gnu_make); then \
  31     sane_makeflags=$$MFLAGS; \
  32   else \
  33     case $$MAKEFLAGS in \
  34       *\\[\ \   ]*) \
  35         bs=\\; \
  36         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  37           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  38     esac; \
  39   fi; \
  40   skip_next=no; \
  41   strip_trailopt () \
  42   { \
  43     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  44   }; \
  45   for flg in $$sane_makeflags; do \
  46     test $$skip_next = yes && { skip_next=no; continue; }; \
  47     case $$flg in \
  48       *=*|--*) continue;; \
  49         -*I) strip_trailopt 'I'; skip_next=yes;; \
  50       -*I?*) strip_trailopt 'I';; \
  51         -*O) strip_trailopt 'O'; skip_next=yes;; \
  52       -*O?*) strip_trailopt 'O';; \
  53         -*l) strip_trailopt 'l'; skip_next=yes;; \
  54       -*l?*) strip_trailopt 'l';; \
  55       -[dEDm]) skip_next=yes;; \
  56       -[JT]) skip_next=yes;; \
  57     esac; \
  58     case $$flg in \
  59       *$$target_option*) has_opt=yes; break;; \
  60     esac; \
  61   done; \
  62   test $$has_opt = yes
  63 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  64 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  65 pkgdatadir = $(datadir)/@PACKAGE@
  66 pkgincludedir = $(includedir)/@PACKAGE@
  67 pkglibdir = $(libdir)/@PACKAGE@
  68 pkglibexecdir = $(libexecdir)/@PACKAGE@
  69 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  70 install_sh_DATA = $(install_sh) -c -m 644
  71 install_sh_PROGRAM = $(install_sh) -c
  72 install_sh_SCRIPT = $(install_sh) -c
  73 INSTALL_HEADER = $(INSTALL_DATA)
  74 transform = $(program_transform_name)
  75 NORMAL_INSTALL = :
  76 PRE_INSTALL = :
  77 POST_INSTALL = :
  78 NORMAL_UNINSTALL = :
  79 PRE_UNINSTALL = :
  80 POST_UNINSTALL = :
  81 build_triplet = @build@
  82 host_triplet = @host@
  83 TESTS = t_openpam_ctype$(EXEEXT) t_openpam_readword$(EXEEXT) \
  84         t_openpam_readlinev$(EXEEXT)
  85 check_PROGRAMS = $(am__EXEEXT_1)
  86 subdir = t
  87 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  88         $(top_srcdir)/depcomp $(noinst_HEADERS) \
  89         $(top_srcdir)/test-driver
  90 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  91 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  92 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  93         $(ACLOCAL_M4)
  94 mkinstalldirs = $(install_sh) -d
  95 CONFIG_HEADER = $(top_builddir)/config.h
  96 CONFIG_CLEAN_FILES =
  97 CONFIG_CLEAN_VPATH_FILES =
  98 ARFLAGS = cru
  99 AM_V_AR = $(am__v_AR_@AM_V@)
 100 am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
 101 am__v_AR_0 = @echo "  AR      " $@;
 102 am__v_AR_1 =
 103 libt_a_AR = $(AR) $(ARFLAGS)
 104 libt_a_LIBADD =
 105 am_libt_a_OBJECTS = t_main.$(OBJEXT) t_file.$(OBJEXT)
 106 libt_a_OBJECTS = $(am_libt_a_OBJECTS)
 107 am__EXEEXT_1 = t_openpam_ctype$(EXEEXT) t_openpam_readword$(EXEEXT) \
 108         t_openpam_readlinev$(EXEEXT)
 109 t_openpam_ctype_SOURCES = t_openpam_ctype.c
 110 t_openpam_ctype_OBJECTS = t_openpam_ctype.$(OBJEXT)
 111 t_openpam_ctype_LDADD = $(LDADD)
 112 t_openpam_ctype_DEPENDENCIES = libt.a \
 113         $(top_builddir)/lib/libpam/libpam.la
 114 AM_V_lt = $(am__v_lt_@AM_V@)
 115 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 116 am__v_lt_0 = --silent
 117 am__v_lt_1 =
 118 t_openpam_readlinev_SOURCES = t_openpam_readlinev.c
 119 t_openpam_readlinev_OBJECTS = t_openpam_readlinev.$(OBJEXT)
 120 t_openpam_readlinev_LDADD = $(LDADD)
 121 t_openpam_readlinev_DEPENDENCIES = libt.a \
 122         $(top_builddir)/lib/libpam/libpam.la
 123 t_openpam_readword_SOURCES = t_openpam_readword.c
 124 t_openpam_readword_OBJECTS = t_openpam_readword.$(OBJEXT)
 125 t_openpam_readword_LDADD = $(LDADD)
 126 t_openpam_readword_DEPENDENCIES = libt.a \
 127         $(top_builddir)/lib/libpam/libpam.la
 128 AM_V_P = $(am__v_P_@AM_V@)
 129 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 130 am__v_P_0 = false
 131 am__v_P_1 = :
 132 AM_V_GEN = $(am__v_GEN_@AM_V@)
 133 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 134 am__v_GEN_0 = @echo "  GEN     " $@;
 135 am__v_GEN_1 =
 136 AM_V_at = $(am__v_at_@AM_V@)
 137 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 138 am__v_at_0 = @
 139 am__v_at_1 =
 140 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 141 depcomp = $(SHELL) $(top_srcdir)/depcomp
 142 am__depfiles_maybe = depfiles
 143 am__mv = mv -f
 144 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 145         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 146 LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 147         $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 148         $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 149         $(AM_CFLAGS) $(CFLAGS)
 150 AM_V_CC = $(am__v_CC_@AM_V@)
 151 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 152 am__v_CC_0 = @echo "  CC      " $@;
 153 am__v_CC_1 =
 154 CCLD = $(CC)
 155 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 156         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 157         $(AM_LDFLAGS) $(LDFLAGS) -o $@
 158 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 159 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 160 am__v_CCLD_0 = @echo "  CCLD    " $@;
 161 am__v_CCLD_1 =
 162 SOURCES = $(libt_a_SOURCES) t_openpam_ctype.c t_openpam_readlinev.c \
 163         t_openpam_readword.c
 164 DIST_SOURCES = $(libt_a_SOURCES) t_openpam_ctype.c \
 165         t_openpam_readlinev.c t_openpam_readword.c
 166 am__can_run_installinfo = \
 167   case $$AM_UPDATE_INFO_DIR in \
 168     n|no|NO) false;; \
 169     *) (install-info --version) >/dev/null 2>&1;; \
 170   esac
 171 HEADERS = $(noinst_HEADERS)
 172 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 173 # Read a list of newline-separated strings from the standard input,
 174 # and print each of them once, without duplicates.  Input order is
 175 # *not* preserved.
 176 am__uniquify_input = $(AWK) '\
 177   BEGIN { nonempty = 0; } \
 178   { items[$$0] = 1; nonempty = 1; } \
 179   END { if (nonempty) { for (i in items) print i; }; } \
 180 '
 181 # Make sure the list of sources is unique.  This is necessary because,
 182 # e.g., the same source file might be shared among _SOURCES variables
 183 # for different programs/libraries.
 184 am__define_uniq_tagged_files = \
 185   list='$(am__tagged_files)'; \
 186   unique=`for i in $$list; do \
 187     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 188   done | $(am__uniquify_input)`
 189 ETAGS = etags
 190 CTAGS = ctags
 191 am__tty_colors_dummy = \
 192   mgn= red= grn= lgn= blu= brg= std=; \
 193   am__color_tests=no
 194 am__tty_colors = { \
 195   $(am__tty_colors_dummy); \
 196   if test "X$(AM_COLOR_TESTS)" = Xno; then \
 197     am__color_tests=no; \
 198   elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
 199     am__color_tests=yes; \
 200   elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
 201     am__color_tests=yes; \
 202   fi; \
 203   if test $$am__color_tests = yes; then \
 204     red='\e[0;31m'; \
 205     grn='\e[0;32m'; \
 206     lgn='\e[1;32m'; \
 207     blu='\e[1;34m'; \
 208     mgn='\e[0;35m'; \
 209     brg='\e[1m'; \
 210     std='\e[m'; \
 211   fi; \
 212 }
 213 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 214 am__vpath_adj = case $$p in \
 215     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 216     *) f=$$p;; \
 217   esac;
 218 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 219 am__install_max = 40
 220 am__nobase_strip_setup = \
 221   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 222 am__nobase_strip = \
 223   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 224 am__nobase_list = $(am__nobase_strip_setup); \
 225   for p in $$list; do echo "$$p $$p"; done | \
 226   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 227   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 228     if (++n[$$2] == $(am__install_max)) \
 229       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 230     END { for (dir in files) print dir, files[dir] }'
 231 am__base_list = \
 232   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 233   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 234 am__uninstall_files_from_dir = { \
 235   test -z "$$files" \
 236     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 237     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 238          $(am__cd) "$$dir" && rm -f $$files; }; \
 239   }
 240 am__recheck_rx = ^[     ]*:recheck:[    ]*
 241 am__global_test_result_rx = ^[  ]*:global-test-result:[         ]*
 242 am__copy_in_global_log_rx = ^[  ]*:copy-in-global-log:[         ]*
 243 # A command that, given a newline-separated list of test names on the
 244 # standard input, print the name of the tests that are to be re-run
 245 # upon "make recheck".
 246 am__list_recheck_tests = $(AWK) '{ \
 247   recheck = 1; \
 248   while ((rc = (getline line < ($$0 ".trs"))) != 0) \
 249     { \
 250       if (rc < 0) \
 251         { \
 252           if ((getline line2 < ($$0 ".log")) < 0) \
 253             recheck = 0; \
 254           break; \
 255         } \
 256       else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
 257         { \
 258           recheck = 0; \
 259           break; \
 260         } \
 261       else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
 262         { \
 263           break; \
 264         } \
 265     }; \
 266   if (recheck) \
 267     print $$0; \
 268   close ($$0 ".trs"); \
 269   close ($$0 ".log"); \
 270 }'
 271 # A command that, given a newline-separated list of test names on the
 272 # standard input, create the global log from their .trs and .log files.
 273 am__create_global_log = $(AWK) ' \
 274 function fatal(msg) \
 275 { \
 276   print "fatal: making $@: " msg | "cat >&2"; \
 277   exit 1; \
 278 } \
 279 function rst_section(header) \
 280 { \
 281   print header; \
 282   len = length(header); \
 283   for (i = 1; i <= len; i = i + 1) \
 284     printf "="; \
 285   printf "\n\n"; \
 286 } \
 287 { \
 288   copy_in_global_log = 1; \
 289   global_test_result = "RUN"; \
 290   while ((rc = (getline line < ($$0 ".trs"))) != 0) \
 291     { \
 292       if (rc < 0) \
 293          fatal("failed to read from " $$0 ".trs"); \
 294       if (line ~ /$(am__global_test_result_rx)/) \
 295         { \
 296           sub("$(am__global_test_result_rx)", "", line); \
 297           sub("[        ]*$$", "", line); \
 298           global_test_result = line; \
 299         } \
 300       else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
 301         copy_in_global_log = 0; \
 302     }; \
 303   if (copy_in_global_log) \
 304     { \
 305       rst_section(global_test_result ": " $$0); \
 306       while ((rc = (getline line < ($$0 ".log"))) != 0) \
 307       { \
 308         if (rc < 0) \
 309           fatal("failed to read from " $$0 ".log"); \
 310         print line; \
 311       }; \
 312       printf "\n"; \
 313     }; \
 314   close ($$0 ".trs"); \
 315   close ($$0 ".log"); \
 316 }'
 317 # Restructured Text title.
 318 am__rst_title = { sed 's/.*/   &   /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
 319 # Solaris 10 'make', and several other traditional 'make' implementations,
 320 # pass "-e" to $(SHELL), and POSIX 2008 even requires this.  Work around it
 321 # by disabling -e (using the XSI extension "set +e") if it's set.
 322 am__sh_e_setup = case $$- in *e*) set +e;; esac
 323 # Default flags passed to test drivers.
 324 am__common_driver_flags = \
 325   --color-tests "$$am__color_tests" \
 326   --enable-hard-errors "$$am__enable_hard_errors" \
 327   --expect-failure "$$am__expect_failure"
 328 # To be inserted before the command running the test.  Creates the
 329 # directory for the log if needed.  Stores in $dir the directory
 330 # containing $f, in $tst the test, in $log the log.  Executes the
 331 # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
 332 # passes TESTS_ENVIRONMENT.  Set up options for the wrapper that
 333 # will run the test scripts (or their associated LOG_COMPILER, if
 334 # thy have one).
 335 am__check_pre = \
 336 $(am__sh_e_setup);                                      \
 337 $(am__vpath_adj_setup) $(am__vpath_adj)                 \
 338 $(am__tty_colors);                                      \
 339 srcdir=$(srcdir); export srcdir;                        \
 340 case "$@" in                                            \
 341   */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;;    \
 342     *) am__odir=.;;                                     \
 343 esac;                                                   \
 344 test "x$$am__odir" = x"." || test -d "$$am__odir"       \
 345   || $(MKDIR_P) "$$am__odir" || exit $$?;               \
 346 if test -f "./$$f"; then dir=./;                        \
 347 elif test -f "$$f"; then dir=;                          \
 348 else dir="$(srcdir)/"; fi;                              \
 349 tst=$$dir$$f; log='$@';                                 \
 350 if test -n '$(DISABLE_HARD_ERRORS)'; then               \
 351   am__enable_hard_errors=no;                            \
 352 else                                                    \
 353   am__enable_hard_errors=yes;                           \
 354 fi;                                                     \
 355 case " $(XFAIL_TESTS) " in                              \
 356   *[\ \ ]$$f[\ \        ]* | *[\ \      ]$$dir$$f[\ \   ]*) \
 357     am__expect_failure=yes;;                            \
 358   *)                                                    \
 359     am__expect_failure=no;;                             \
 360 esac;                                                   \
 361 $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
 362 # A shell command to get the names of the tests scripts with any registered
 363 # extension removed (i.e., equivalently, the names of the test logs, with
 364 # the '.log' extension removed).  The result is saved in the shell variable
 365 # '$bases'.  This honors runtime overriding of TESTS and TEST_LOGS.  Sadly,
 366 # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
 367 # since that might cause problem with VPATH rewrites for suffix-less tests.
 368 # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
 369 am__set_TESTS_bases = \
 370   bases='$(TEST_LOGS)'; \
 371   bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
 372   bases=`echo $$bases`
 373 RECHECK_LOGS = $(TEST_LOGS)
 374 AM_RECURSIVE_TARGETS = check recheck
 375 TEST_SUITE_LOG = test-suite.log
 376 TEST_EXTENSIONS = @EXEEXT@ .test
 377 LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
 378 LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
 379 am__set_b = \
 380   case '$@' in \
 381     */*) \
 382       case '$*' in \
 383         */*) b='$*';; \
 384           *) b=`echo '$@' | sed 's/\.log$$//'`; \
 385        esac;; \
 386     *) \
 387       b='$*';; \
 388   esac
 389 am__test_logs1 = $(TESTS:=.log)
 390 am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
 391 TEST_LOGS = $(am__test_logs2:.test.log=.log)
 392 TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
 393 TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
 394         $(TEST_LOG_FLAGS)
 395 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 396 ACLOCAL = @ACLOCAL@
 397 AMTAR = @AMTAR@
 398 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 399 AR = @AR@
 400 AUTOCONF = @AUTOCONF@
 401 AUTOHEADER = @AUTOHEADER@
 402 AUTOMAKE = @AUTOMAKE@
 403 AWK = @AWK@
 404 CC = @CC@
 405 CCDEPMODE = @CCDEPMODE@
 406 CFLAGS = @CFLAGS@
 407 CPP = @CPP@
 408 CPPFLAGS = @CPPFLAGS@
 409 CRYPTO_LIBS = @CRYPTO_LIBS@
 410 CRYPT_LIBS = @CRYPT_LIBS@
 411 CYGPATH_W = @CYGPATH_W@
 412 DEFS = @DEFS@
 413 DEPDIR = @DEPDIR@
 414 DLLTOOL = @DLLTOOL@
 415 DL_LIBS = @DL_LIBS@
 416 DSYMUTIL = @DSYMUTIL@
 417 DUMPBIN = @DUMPBIN@
 418 ECHO_C = @ECHO_C@
 419 ECHO_N = @ECHO_N@
 420 ECHO_T = @ECHO_T@
 421 EGREP = @EGREP@
 422 EXEEXT = @EXEEXT@
 423 FGREP = @FGREP@
 424 GREP = @GREP@
 425 INSTALL = @INSTALL@
 426 INSTALL_DATA = @INSTALL_DATA@
 427 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 428 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 429 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 430 LD = @LD@
 431 LDFLAGS = @LDFLAGS@
 432 LIBOBJS = @LIBOBJS@
 433 LIBS = @LIBS@
 434 LIBTOOL = @LIBTOOL@
 435 LIB_MAJ = @LIB_MAJ@
 436 LIPO = @LIPO@
 437 LN_S = @LN_S@
 438 LTLIBOBJS = @LTLIBOBJS@
 439 MAKEINFO = @MAKEINFO@
 440 MANIFEST_TOOL = @MANIFEST_TOOL@
 441 MKDIR_P = @MKDIR_P@
 442 NM = @NM@
 443 NMEDIT = @NMEDIT@
 444 OBJDUMP = @OBJDUMP@
 445 OBJEXT = @OBJEXT@
 446 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
 447 OTOOL = @OTOOL@
 448 OTOOL64 = @OTOOL64@
 449 PACKAGE = @PACKAGE@
 450 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 451 PACKAGE_NAME = @PACKAGE_NAME@
 452 PACKAGE_STRING = @PACKAGE_STRING@
 453 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 454 PACKAGE_URL = @PACKAGE_URL@
 455 PACKAGE_VERSION = @PACKAGE_VERSION@
 456 PATH_SEPARATOR = @PATH_SEPARATOR@
 457 RANLIB = @RANLIB@
 458 SED = @SED@
 459 SET_MAKE = @SET_MAKE@
 460 SHELL = @SHELL@
 461 STRIP = @STRIP@
 462 VERSION = @VERSION@
 463 abs_builddir = @abs_builddir@
 464 abs_srcdir = @abs_srcdir@
 465 abs_top_builddir = @abs_top_builddir@
 466 abs_top_srcdir = @abs_top_srcdir@
 467 ac_ct_AR = @ac_ct_AR@
 468 ac_ct_CC = @ac_ct_CC@
 469 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 470 am__include = @am__include@
 471 am__leading_dot = @am__leading_dot@
 472 am__quote = @am__quote@
 473 am__tar = @am__tar@
 474 am__untar = @am__untar@
 475 bindir = @bindir@
 476 build = @build@
 477 build_alias = @build_alias@
 478 build_cpu = @build_cpu@
 479 build_os = @build_os@
 480 build_vendor = @build_vendor@
 481 builddir = @builddir@
 482 datadir = @datadir@
 483 datarootdir = @datarootdir@
 484 docdir = @docdir@
 485 dvidir = @dvidir@
 486 exec_prefix = @exec_prefix@
 487 host = @host@
 488 host_alias = @host_alias@
 489 host_cpu = @host_cpu@
 490 host_os = @host_os@
 491 host_vendor = @host_vendor@
 492 htmldir = @htmldir@
 493 includedir = @includedir@
 494 infodir = @infodir@
 495 install_sh = @install_sh@
 496 libdir = @libdir@
 497 libexecdir = @libexecdir@
 498 localedir = @localedir@
 499 localstatedir = @localstatedir@
 500 mandir = @mandir@
 501 mkdir_p = @mkdir_p@
 502 oldincludedir = @oldincludedir@
 503 pdfdir = @pdfdir@
 504 prefix = @prefix@
 505 program_transform_name = @program_transform_name@
 506 psdir = @psdir@
 507 sbindir = @sbindir@
 508 sharedstatedir = @sharedstatedir@
 509 srcdir = @srcdir@
 510 sysconfdir = @sysconfdir@
 511 target_alias = @target_alias@
 512 top_build_prefix = @top_build_prefix@
 513 top_builddir = @top_builddir@
 514 top_srcdir = @top_srcdir@
 515 AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_srcdir)/lib/libpam
 516 noinst_HEADERS = t.h
 517
 518 # libt - common support code
 519 check_LIBRARIES = libt.a
 520 libt_a_SOURCES = t_main.c t_file.c
 521
 522 # link with libpam and libt
 523 LDADD = libt.a $(top_builddir)/lib/libpam/libpam.la
 524 all: all-am
 525
 526 .SUFFIXES:
 527 .SUFFIXES: .c .lo .log .o .obj .test .test$(EXEEXT) .trs
 528 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 529         @for dep in $?; do \
 530           case '$(am__configure_deps)' in \
 531             *$$dep*) \
 532               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 533                 && { if test -f $@; then exit 0; else break; fi; }; \
 534               exit 1;; \
 535           esac; \
 536         done; \
 537         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign t/Makefile'; \
 538         $(am__cd) $(top_srcdir) && \
 539           $(AUTOMAKE) --foreign t/Makefile
 540 .PRECIOUS: Makefile
 541 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 542         @case '$?' in \
 543           *config.status*) \
 544             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 545           *) \
 546             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 547             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 548         esac;
 549
 550 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 551         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 552
 553 $(top_srcdir)/configure:  $(am__configure_deps)
 554         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 555 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 556         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 557 $(am__aclocal_m4_deps):
 558
 559 clean-checkLIBRARIES:
 560         -test -z "$(check_LIBRARIES)" || rm -f $(check_LIBRARIES)
 561
 562 libt.a: $(libt_a_OBJECTS) $(libt_a_DEPENDENCIES) $(EXTRA_libt_a_DEPENDENCIES)
 563         $(AM_V_at)-rm -f libt.a
 564         $(AM_V_AR)$(libt_a_AR) libt.a $(libt_a_OBJECTS) $(libt_a_LIBADD)
 565         $(AM_V_at)$(RANLIB) libt.a
 566
 567 clean-checkPROGRAMS:
 568         @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
 569         echo " rm -f" $$list; \
 570         rm -f $$list || exit $$?; \
 571         test -n "$(EXEEXT)" || exit 0; \
 572         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 573         echo " rm -f" $$list; \
 574         rm -f $$list
 575
 576 t_openpam_ctype$(EXEEXT): $(t_openpam_ctype_OBJECTS) $(t_openpam_ctype_DEPENDENCIES) $(EXTRA_t_openpam_ctype_DEPENDENCIES)
 577         @rm -f t_openpam_ctype$(EXEEXT)
 578         $(AM_V_CCLD)$(LINK) $(t_openpam_ctype_OBJECTS) $(t_openpam_ctype_LDADD) $(LIBS)
 579
 580 t_openpam_readlinev$(EXEEXT): $(t_openpam_readlinev_OBJECTS) $(t_openpam_readlinev_DEPENDENCIES) $(EXTRA_t_openpam_readlinev_DEPENDENCIES)
 581         @rm -f t_openpam_readlinev$(EXEEXT)
 582         $(AM_V_CCLD)$(LINK) $(t_openpam_readlinev_OBJECTS) $(t_openpam_readlinev_LDADD) $(LIBS)
 583
 584 t_openpam_readword$(EXEEXT): $(t_openpam_readword_OBJECTS) $(t_openpam_readword_DEPENDENCIES) $(EXTRA_t_openpam_readword_DEPENDENCIES)
 585         @rm -f t_openpam_readword$(EXEEXT)
 586         $(AM_V_CCLD)$(LINK) $(t_openpam_readword_OBJECTS) $(t_openpam_readword_LDADD) $(LIBS)
 587
 588 mostlyclean-compile:
 589         -rm -f *.$(OBJEXT)
 590
 591 distclean-compile:
 592         -rm -f *.tab.c
 593
 594 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_file.Po@am__quote@
 595 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_main.Po@am__quote@
 596 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_openpam_ctype.Po@am__quote@
 597 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_openpam_readlinev.Po@am__quote@
 598 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t_openpam_readword.Po@am__quote@
 599
 600 .c.o:
 601 @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 602 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 603 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 604 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 605 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 606
 607 .c.obj:
 608 @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 609 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 610 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 611 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 612 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 613
 614 .c.lo:
 615 @am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 616 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 617 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 618 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 619 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 620
 621 mostlyclean-libtool:
 622         -rm -f *.lo
 623
 624 clean-libtool:
 625         -rm -rf .libs _libs
 626
 627 ID: $(am__tagged_files)
 628         $(am__define_uniq_tagged_files); mkid -fID $$unique
 629 tags: tags-am
 630 TAGS: tags
 631
 632 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 633         set x; \
 634         here=`pwd`; \
 635         $(am__define_uniq_tagged_files); \
 636         shift; \
 637         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 638           test -n "$$unique" || unique=$$empty_fix; \
 639           if test $$# -gt 0; then \
 640             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 641               "$$@" $$unique; \
 642           else \
 643             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 644               $$unique; \
 645           fi; \
 646         fi
 647 ctags: ctags-am
 648
 649 CTAGS: ctags
 650 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 651         $(am__define_uniq_tagged_files); \
 652         test -z "$(CTAGS_ARGS)$$unique" \
 653           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 654              $$unique
 655
 656 GTAGS:
 657         here=`$(am__cd) $(top_builddir) && pwd` \
 658           && $(am__cd) $(top_srcdir) \
 659           && gtags -i $(GTAGS_ARGS) "$$here"
 660 cscopelist: cscopelist-am
 661
 662 cscopelist-am: $(am__tagged_files)
 663         list='$(am__tagged_files)'; \
 664         case "$(srcdir)" in \
 665           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 666           *) sdir=$(subdir)/$(srcdir) ;; \
 667         esac; \
 668         for i in $$list; do \
 669           if test -f "$$i"; then \
 670             echo "$(subdir)/$$i"; \
 671           else \
 672             echo "$$sdir/$$i"; \
 673           fi; \
 674         done >> $(top_builddir)/cscope.files
 675
 676 distclean-tags:
 677         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 678
 679 # Recover from deleted '.trs' file; this should ensure that
 680 # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
 681 # both 'foo.log' and 'foo.trs'.  Break the recipe in two subshells
 682 # to avoid problems with "make -n".
 683 .log.trs:
 684         rm -f $< $@
 685         $(MAKE) $(AM_MAKEFLAGS) $<
 686
 687 # Leading 'am--fnord' is there to ensure the list of targets does not
 688 # expand to empty, as could happen e.g. with make check TESTS=''.
 689 am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
 690 am--force-recheck:
 691         @:
 692
 693 $(TEST_SUITE_LOG): $(TEST_LOGS)
 694         @$(am__set_TESTS_bases); \
 695         am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
 696         redo_bases=`for i in $$bases; do \
 697                       am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
 698                     done`; \
 699         if test -n "$$redo_bases"; then \
 700           redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
 701           redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
 702           if $(am__make_dryrun); then :; else \
 703             rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
 704           fi; \
 705         fi; \
 706         if test -n "$$am__remaking_logs"; then \
 707           echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
 708                "recursion detected" >&2; \
 709         else \
 710           am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
 711         fi; \
 712         if $(am__make_dryrun); then :; else \
 713           st=0;  \
 714           errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
 715           for i in $$redo_bases; do \
 716             test -f $$i.trs && test -r $$i.trs \
 717               || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
 718             test -f $$i.log && test -r $$i.log \
 719               || { echo "$$errmsg $$i.log" >&2; st=1; }; \
 720           done; \
 721           test $$st -eq 0 || exit 1; \
 722         fi
 723         @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
 724         ws='[   ]'; \
 725         results=`for b in $$bases; do echo $$b.trs; done`; \
 726         test -n "$$results" || results=/dev/null; \
 727         all=`  grep "^$$ws*:test-result:"           $$results | wc -l`; \
 728         pass=` grep "^$$ws*:test-result:$$ws*PASS"  $$results | wc -l`; \
 729         fail=` grep "^$$ws*:test-result:$$ws*FAIL"  $$results | wc -l`; \
 730         skip=` grep "^$$ws*:test-result:$$ws*SKIP"  $$results | wc -l`; \
 731         xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
 732         xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
 733         error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
 734         if test `expr $$fail + $$xpass + $$error` -eq 0; then \
 735           success=true; \
 736         else \
 737           success=false; \
 738         fi; \
 739         br='==================='; br=$$br$$br$$br$$br; \
 740         result_count () \
 741         { \
 742             if test x"$$1" = x"--maybe-color"; then \
 743               maybe_colorize=yes; \
 744             elif test x"$$1" = x"--no-color"; then \
 745               maybe_colorize=no; \
 746             else \
 747               echo "$@: invalid 'result_count' usage" >&2; exit 4; \
 748             fi; \
 749             shift; \
 750             desc=$$1 count=$$2; \
 751             if test $$maybe_colorize = yes && test $$count -gt 0; then \
 752               color_start=$$3 color_end=$$std; \
 753             else \
 754               color_start= color_end=; \
 755             fi; \
 756             echo "$${color_start}# $$desc $$count$${color_end}"; \
 757         }; \
 758         create_testsuite_report () \
 759         { \
 760           result_count $$1 "TOTAL:" $$all   "$$brg"; \
 761           result_count $$1 "PASS: " $$pass  "$$grn"; \
 762           result_count $$1 "SKIP: " $$skip  "$$blu"; \
 763           result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
 764           result_count $$1 "FAIL: " $$fail  "$$red"; \
 765           result_count $$1 "XPASS:" $$xpass "$$red"; \
 766           result_count $$1 "ERROR:" $$error "$$mgn"; \
 767         }; \
 768         {                                                               \
 769           echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |       \
 770             $(am__rst_title);                                           \
 771           create_testsuite_report --no-color;                           \
 772           echo;                                                         \
 773           echo ".. contents:: :depth: 2";                               \
 774           echo;                                                         \
 775           for b in $$bases; do echo $$b; done                           \
 776             | $(am__create_global_log);                                 \
 777         } >$(TEST_SUITE_LOG).tmp || exit 1;                             \
 778         mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);                     \
 779         if $$success; then                                              \
 780           col="$$grn";                                                  \
 781          else                                                           \
 782           col="$$red";                                                  \
 783           test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG);               \
 784         fi;                                                             \
 785         echo "$${col}$$br$${std}";                                      \
 786         echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}";   \
 787         echo "$${col}$$br$${std}";                                      \
 788         create_testsuite_report --maybe-color;                          \
 789         echo "$$col$$br$$std";                                          \
 790         if $$success; then :; else                                      \
 791           echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";         \
 792           if test -n "$(PACKAGE_BUGREPORT)"; then                       \
 793             echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
 794           fi;                                                           \
 795           echo "$$col$$br$$std";                                        \
 796         fi;                                                             \
 797         $$success || exit 1
 798
 799 check-TESTS:
 800         @list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
 801         @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
 802         @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 803         @set +e; $(am__set_TESTS_bases); \
 804         log_list=`for i in $$bases; do echo $$i.log; done`; \
 805         trs_list=`for i in $$bases; do echo $$i.trs; done`; \
 806         log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
 807         $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
 808         exit $$?;
 809 recheck: all $(check_LIBRARIES) $(check_PROGRAMS)
 810         @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 811         @set +e; $(am__set_TESTS_bases); \
 812         bases=`for i in $$bases; do echo $$i; done \
 813                  | $(am__list_recheck_tests)` || exit 1; \
 814         log_list=`for i in $$bases; do echo $$i.log; done`; \
 815         log_list=`echo $$log_list`; \
 816         $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
 817                 am__force_recheck=am--force-recheck \
 818                 TEST_LOGS="$$log_list"; \
 819         exit $$?
 820 t_openpam_ctype.log: t_openpam_ctype$(EXEEXT)
 821         @p='t_openpam_ctype$(EXEEXT)'; \
 822         b='t_openpam_ctype'; \
 823         $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
 824         --log-file $$b.log --trs-file $$b.trs \
 825         $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
 826         "$$tst" $(AM_TESTS_FD_REDIRECT)
 827 t_openpam_readword.log: t_openpam_readword$(EXEEXT)
 828         @p='t_openpam_readword$(EXEEXT)'; \
 829         b='t_openpam_readword'; \
 830         $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
 831         --log-file $$b.log --trs-file $$b.trs \
 832         $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
 833         "$$tst" $(AM_TESTS_FD_REDIRECT)
 834 t_openpam_readlinev.log: t_openpam_readlinev$(EXEEXT)
 835         @p='t_openpam_readlinev$(EXEEXT)'; \
 836         b='t_openpam_readlinev'; \
 837         $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
 838         --log-file $$b.log --trs-file $$b.trs \
 839         $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
 840         "$$tst" $(AM_TESTS_FD_REDIRECT)
 841 .test.log:
 842         @p='$<'; \
 843         $(am__set_b); \
 844         $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
 845         --log-file $$b.log --trs-file $$b.trs \
 846         $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
 847         "$$tst" $(AM_TESTS_FD_REDIRECT)
 848 @am__EXEEXT_TRUE@.test$(EXEEXT).log:
 849 @am__EXEEXT_TRUE@       @p='$<'; \
 850 @am__EXEEXT_TRUE@       $(am__set_b); \
 851 @am__EXEEXT_TRUE@       $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
 852 @am__EXEEXT_TRUE@       --log-file $$b.log --trs-file $$b.trs \
 853 @am__EXEEXT_TRUE@       $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
 854 @am__EXEEXT_TRUE@       "$$tst" $(AM_TESTS_FD_REDIRECT)
 855
 856 distdir: $(DISTFILES)
 857         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 858         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 859         list='$(DISTFILES)'; \
 860           dist_files=`for file in $$list; do echo $$file; done | \
 861           sed -e "s|^$$srcdirstrip/||;t" \
 862               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 863         case $$dist_files in \
 864           */*) $(MKDIR_P) `echo "$$dist_files" | \
 865                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 866                            sort -u` ;; \
 867         esac; \
 868         for file in $$dist_files; do \
 869           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 870           if test -d $$d/$$file; then \
 871             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 872             if test -d "$(distdir)/$$file"; then \
 873               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 874             fi; \
 875             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 876               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 877               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 878             fi; \
 879             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 880           else \
 881             test -f "$(distdir)/$$file" \
 882             || cp -p $$d/$$file "$(distdir)/$$file" \
 883             || exit 1; \
 884           fi; \
 885         done
 886 check-am: all-am
 887         $(MAKE) $(AM_MAKEFLAGS) $(check_LIBRARIES) $(check_PROGRAMS)
 888         $(MAKE) $(AM_MAKEFLAGS) check-TESTS
 889 check: check-am
 890 all-am: Makefile $(HEADERS)
 891 installdirs:
 892 install: install-am
 893 install-exec: install-exec-am
 894 install-data: install-data-am
 895 uninstall: uninstall-am
 896
 897 install-am: all-am
 898         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 899
 900 installcheck: installcheck-am
 901 install-strip:
 902         if test -z '$(STRIP)'; then \
 903           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 904             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 905               install; \
 906         else \
 907           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 908             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 909             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 910         fi
 911 mostlyclean-generic:
 912         -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
 913         -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
 914         -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
 915
 916 clean-generic:
 917
 918 distclean-generic:
 919         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 920         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 921
 922 maintainer-clean-generic:
 923         @echo "This command is intended for maintainers to use"
 924         @echo "it deletes files that may require special tools to rebuild."
 925 clean: clean-am
 926
 927 clean-am: clean-checkLIBRARIES clean-checkPROGRAMS clean-generic \
 928         clean-libtool mostlyclean-am
 929
 930 distclean: distclean-am
 931         -rm -rf ./$(DEPDIR)
 932         -rm -f Makefile
 933 distclean-am: clean-am distclean-compile distclean-generic \
 934         distclean-tags
 935
 936 dvi: dvi-am
 937
 938 dvi-am:
 939
 940 html: html-am
 941
 942 html-am:
 943
 944 info: info-am
 945
 946 info-am:
 947
 948 install-data-am:
 949
 950 install-dvi: install-dvi-am
 951
 952 install-dvi-am:
 953
 954 install-exec-am:
 955
 956 install-html: install-html-am
 957
 958 install-html-am:
 959
 960 install-info: install-info-am
 961
 962 install-info-am:
 963
 964 install-man:
 965
 966 install-pdf: install-pdf-am
 967
 968 install-pdf-am:
 969
 970 install-ps: install-ps-am
 971
 972 install-ps-am:
 973
 974 installcheck-am:
 975
 976 maintainer-clean: maintainer-clean-am
 977         -rm -rf ./$(DEPDIR)
 978         -rm -f Makefile
 979 maintainer-clean-am: distclean-am maintainer-clean-generic
 980
 981 mostlyclean: mostlyclean-am
 982
 983 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 984         mostlyclean-libtool
 985
 986 pdf: pdf-am
 987
 988 pdf-am:
 989
 990 ps: ps-am
 991
 992 ps-am:
 993
 994 uninstall-am:
 995
 996 .MAKE: check-am install-am install-strip
 997
 998 .PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am clean \
 999         clean-checkLIBRARIES clean-checkPROGRAMS clean-generic \
1000         clean-libtool cscopelist-am ctags ctags-am distclean \
1001         distclean-compile distclean-generic distclean-libtool \
1002         distclean-tags distdir dvi dvi-am html html-am info info-am \
1003         install install-am install-data install-data-am install-dvi \
1004         install-dvi-am install-exec install-exec-am install-html \
1005         install-html-am install-info install-info-am install-man \
1006         install-pdf install-pdf-am install-ps install-ps-am \
1007         install-strip installcheck installcheck-am installdirs \
1008         maintainer-clean maintainer-clean-generic mostlyclean \
1009         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1010         pdf pdf-am ps ps-am recheck tags tags-am uninstall \
1011         uninstall-am
1012
1013
1014 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1015 # Otherwise a system limit (for SysV at least) may be exceeded.
1016 .NOEXPORT: