1 SSHD(8) OpenBSD System Manager's Manual SSHD(8)
4 sshd - OpenSSH SSH daemon
7 sshd [-46DdeiqTt] [-b bits] [-C connection_spec]
8 [-c host_certificate_file] [-E log_file] [-f config_file]
9 [-g login_grace_time] [-h host_key_file] [-k key_gen_time]
10 [-o option] [-p port] [-u len]
13 sshd (OpenSSH Daemon) is the daemon program for ssh(1). Together these
14 programs replace rlogin(1) and rsh(1), and provide secure encrypted
15 communications between two untrusted hosts over an insecure network.
17 sshd listens for connections from clients. It is normally started at
18 boot from /etc/rc. It forks a new daemon for each incoming connection.
19 The forked daemons handle key exchange, encryption, authentication,
20 command execution, and data exchange.
22 sshd can be configured using command-line options or a configuration file
23 (by default sshd_config(5)); command-line options override values
24 specified in the configuration file. sshd rereads its configuration file
25 when it receives a hangup signal, SIGHUP, by executing itself with the
26 name and options it was started with, e.g. /usr/sbin/sshd.
28 The options are as follows:
30 -4 Forces sshd to use IPv4 addresses only.
32 -6 Forces sshd to use IPv6 addresses only.
35 Specifies the number of bits in the ephemeral protocol version 1
36 server key (default 1024).
39 Specify the connection parameters to use for the -T extended test
40 mode. If provided, any Match directives in the configuration
41 file that would apply to the specified user, host, and address
42 will be set before the configuration is written to standard
43 output. The connection parameters are supplied as keyword=value
44 pairs. The keywords are ``user'', ``host'', ``laddr'',
45 ``lport'', and ``addr''. All are required and may be supplied in
46 any order, either with multiple -C options or as a comma-
49 -c host_certificate_file
50 Specifies a path to a certificate file to identify sshd during
51 key exchange. The certificate file must match a host key file
52 specified using the -h option or the HostKey configuration
55 -D When this option is specified, sshd will not detach and does not
56 become a daemon. This allows easy monitoring of sshd.
58 -d Debug mode. The server sends verbose debug output to standard
59 error, and does not put itself in the background. The server
60 also will not fork and will only process one connection. This
61 option is only intended for debugging for the server. Multiple
62 -d options increase the debugging level. Maximum is 3.
65 Append debug logs to log_file instead of the system log.
67 -e Write debug logs to standard error instead of the system log.
70 Specifies the name of the configuration file. The default is
71 /etc/ssh/sshd_config. sshd refuses to start if there is no
75 Gives the grace time for clients to authenticate themselves
76 (default 120 seconds). If the client fails to authenticate the
77 user within this many seconds, the server disconnects and exits.
78 A value of zero indicates no limit.
81 Specifies a file from which a host key is read. This option must
82 be given if sshd is not run as root (as the normal host key files
83 are normally not readable by anyone but root). The default is
84 /etc/ssh/ssh_host_key for protocol version 1, and
85 /etc/ssh/ssh_host_dsa_key, /etc/ssh/ssh_host_ecdsa_key.
86 /etc/ssh/ssh_host_ed25519_key and /etc/ssh/ssh_host_rsa_key for
87 protocol version 2. It is possible to have multiple host key
88 files for the different protocol versions and host key
91 -i Specifies that sshd is being run from inetd(8). sshd is normally
92 not run from inetd because it needs to generate the server key
93 before it can respond to the client, and this may take tens of
94 seconds. Clients would have to wait too long if the key was
95 regenerated every time. However, with small key sizes (e.g. 512)
96 using sshd from inetd may be feasible.
99 Specifies how often the ephemeral protocol version 1 server key
100 is regenerated (default 3600 seconds, or one hour). The
101 motivation for regenerating the key fairly often is that the key
102 is not stored anywhere, and after about an hour it becomes
103 impossible to recover the key for decrypting intercepted
104 communications even if the machine is cracked into or physically
105 seized. A value of zero indicates that the key will never be
109 Can be used to give options in the format used in the
110 configuration file. This is useful for specifying options for
111 which there is no separate command-line flag. For full details
112 of the options, and their values, see sshd_config(5).
115 Specifies the port on which the server listens for connections
116 (default 22). Multiple port options are permitted. Ports
117 specified in the configuration file with the Port option are
118 ignored when a command-line port is specified. Ports specified
119 using the ListenAddress option override command-line ports.
121 -q Quiet mode. Nothing is sent to the system log. Normally the
122 beginning, authentication, and termination of each connection is
125 -T Extended test mode. Check the validity of the configuration
126 file, output the effective configuration to stdout and then exit.
127 Optionally, Match rules may be applied by specifying the
128 connection parameters using one or more -C options.
130 -t Test mode. Only check the validity of the configuration file and
131 sanity of the keys. This is useful for updating sshd reliably as
132 configuration options may change.
134 -u len This option is used to specify the size of the field in the utmp
135 structure that holds the remote host name. If the resolved host
136 name is longer than len, the dotted decimal value will be used
137 instead. This allows hosts with very long host names that
138 overflow this field to still be uniquely identified. Specifying
139 -u0 indicates that only dotted decimal addresses should be put
140 into the utmp file. -u0 may also be used to prevent sshd from
141 making DNS requests unless the authentication mechanism or
142 configuration requires it. Authentication mechanisms that may
143 require DNS include RhostsRSAAuthentication,
144 HostbasedAuthentication, and using a from="pattern-list" option
145 in a key file. Configuration options that require DNS include
146 using a USER@HOST pattern in AllowUsers or DenyUsers.
149 The OpenSSH SSH daemon supports SSH protocols 1 and 2. The default is to
150 use protocol 2 only, though this can be changed via the Protocol option
151 in sshd_config(5). Protocol 2 supports DSA, ECDSA, ED25519 and RSA keys;
152 protocol 1 only supports RSA keys. For both protocols, each host has a
153 host-specific key, normally 2048 bits, used to identify the host.
155 Forward security for protocol 1 is provided through an additional server
156 key, normally 768 bits, generated when the server starts. This key is
157 normally regenerated every hour if it has been used, and is never stored
158 on disk. Whenever a client connects, the daemon responds with its public
159 host and server keys. The client compares the RSA host key against its
160 own database to verify that it has not changed. The client then
161 generates a 256-bit random number. It encrypts this random number using
162 both the host key and the server key, and sends the encrypted number to
163 the server. Both sides then use this random number as a session key
164 which is used to encrypt all further communications in the session. The
165 rest of the session is encrypted using a conventional cipher, currently
166 Blowfish or 3DES, with 3DES being used by default. The client selects
167 the encryption algorithm to use from those offered by the server.
169 For protocol 2, forward security is provided through a Diffie-Hellman key
170 agreement. This key agreement results in a shared session key. The rest
171 of the session is encrypted using a symmetric cipher, currently 128-bit
172 AES, Blowfish, 3DES, CAST128, Arcfour, 192-bit AES, or 256-bit AES. The
173 client selects the encryption algorithm to use from those offered by the
174 server. Additionally, session integrity is provided through a
175 cryptographic message authentication code (hmac-md5, hmac-sha1, umac-64,
176 umac-128, hmac-ripemd160, hmac-sha2-256 or hmac-sha2-512).
178 Finally, the server and the client enter an authentication dialog. The
179 client tries to authenticate itself using host-based authentication,
180 public key authentication, challenge-response authentication, or password
183 Regardless of the authentication type, the account is checked to ensure
184 that it is accessible. An account is not accessible if it is locked,
185 listed in DenyUsers or its group is listed in DenyGroups . The
186 definition of a locked account is system dependant. Some platforms have
187 their own account database (eg AIX) and some modify the passwd field (
188 `*LK*' on Solaris and UnixWare, `*' on HP-UX, containing `Nologin' on
189 Tru64, a leading `*LOCKED*' on FreeBSD and a leading `!' on most
190 Linuxes). If there is a requirement to disable password authentication
191 for the account while allowing still public-key, then the passwd field
192 should be set to something other than these values (eg `NP' or `*NP*' ).
194 If the client successfully authenticates itself, a dialog for preparing
195 the session is entered. At this time the client may request things like
196 allocating a pseudo-tty, forwarding X11 connections, forwarding TCP
197 connections, or forwarding the authentication agent connection over the
200 After this, the client either requests a shell or execution of a command.
201 The sides then enter session mode. In this mode, either side may send
202 data at any time, and such data is forwarded to/from the shell or command
203 on the server side, and the user terminal in the client side.
205 When the user program terminates and all forwarded X11 and other
206 connections have been closed, the server sends command exit status to the
207 client, and both sides exit.
210 When a user successfully logs in, sshd does the following:
212 1. If the login is on a tty, and no command has been specified,
213 prints last login time and /etc/motd (unless prevented in the
214 configuration file or by ~/.hushlogin; see the FILES section).
216 2. If the login is on a tty, records login time.
218 3. Checks /etc/nologin; if it exists, prints contents and quits
221 4. Changes to run with normal user privileges.
223 5. Sets up basic environment.
225 6. Reads the file ~/.ssh/environment, if it exists, and users are
226 allowed to change their environment. See the
227 PermitUserEnvironment option in sshd_config(5).
229 7. Changes to user's home directory.
231 8. If ~/.ssh/rc exists, runs it; else if /etc/ssh/sshrc exists,
232 runs it; otherwise runs xauth. The ``rc'' files are given the
233 X11 authentication protocol and cookie in standard input. See
236 9. Runs user's shell or command.
239 If the file ~/.ssh/rc exists, sh(1) runs it after reading the environment
240 files but before starting the user's shell or command. It must not
241 produce any output on stdout; stderr must be used instead. If X11
242 forwarding is in use, it will receive the "proto cookie" pair in its
243 standard input (and DISPLAY in its environment). The script must call
244 xauth(1) because sshd will not run xauth automatically to add X11
247 The primary purpose of this file is to run any initialization routines
248 which may be needed before the user's home directory becomes accessible;
249 AFS is a particular example of such an environment.
251 This file will probably contain some initialization code followed by
252 something similar to:
254 if read proto cookie && [ -n "$DISPLAY" ]; then
255 if [ `echo $DISPLAY | cut -c1-10` = 'localhost:' ]; then
256 # X11UseLocalhost=yes
257 echo add unix:`echo $DISPLAY |
258 cut -c11-` $proto $cookie
261 echo add $DISPLAY $proto $cookie
265 If this file does not exist, /etc/ssh/sshrc is run, and if that does not
266 exist either, xauth is used to add the cookie.
268 AUTHORIZED_KEYS FILE FORMAT
269 AuthorizedKeysFile specifies the files containing public keys for public
270 key authentication; if none is specified, the default is
271 ~/.ssh/authorized_keys and ~/.ssh/authorized_keys2. Each line of the
272 file contains one key (empty lines and lines starting with a `#' are
273 ignored as comments). Protocol 1 public keys consist of the following
274 space-separated fields: options, bits, exponent, modulus, comment.
275 Protocol 2 public key consist of: options, keytype, base64-encoded key,
276 comment. The options field is optional; its presence is determined by
277 whether the line starts with a number or not (the options field never
278 starts with a number). The bits, exponent, modulus, and comment fields
279 give the RSA key for protocol version 1; the comment field is not used
280 for anything (but may be convenient for the user to identify the key).
281 For protocol version 2 the keytype is ``ecdsa-sha2-nistp256'',
282 ``ecdsa-sha2-nistp384'', ``ecdsa-sha2-nistp521'', ``ssh-ed25519'',
283 ``ssh-dss'' or ``ssh-rsa''.
285 Note that lines in this file are usually several hundred bytes long
286 (because of the size of the public key encoding) up to a limit of 8
287 kilobytes, which permits DSA keys up to 8 kilobits and RSA keys up to 16
288 kilobits. You don't want to type them in; instead, copy the
289 identity.pub, id_dsa.pub, id_ecdsa.pub, id_ed25519.pub, or the id_rsa.pub
292 sshd enforces a minimum RSA key modulus size for protocol 1 and protocol
295 The options (if present) consist of comma-separated option
296 specifications. No spaces are permitted, except within double quotes.
297 The following option specifications are supported (note that option
298 keywords are case-insensitive):
301 Specifies that the listed key is a certification authority (CA)
302 that is trusted to validate signed certificates for user
305 Certificates may encode access restrictions similar to these key
306 options. If both certificate restrictions and key options are
307 present, the most restrictive union of the two is applied.
310 Specifies that the command is executed whenever this key is used
311 for authentication. The command supplied by the user (if any) is
312 ignored. The command is run on a pty if the client requests a
313 pty; otherwise it is run without a tty. If an 8-bit clean
314 channel is required, one must not request a pty or should specify
315 no-pty. A quote may be included in the command by quoting it
316 with a backslash. This option might be useful to restrict
317 certain public keys to perform just a specific operation. An
318 example might be a key that permits remote backups but nothing
319 else. Note that the client may specify TCP and/or X11 forwarding
320 unless they are explicitly prohibited. The command originally
321 supplied by the client is available in the SSH_ORIGINAL_COMMAND
322 environment variable. Note that this option applies to shell,
323 command or subsystem execution. Also note that this command may
324 be superseded by either a sshd_config(5) ForceCommand directive
325 or a command embedded in a certificate.
327 environment="NAME=value"
328 Specifies that the string is to be added to the environment when
329 logging in using this key. Environment variables set this way
330 override other default environment values. Multiple options of
331 this type are permitted. Environment processing is disabled by
332 default and is controlled via the PermitUserEnvironment option.
333 This option is automatically disabled if UseLogin is enabled.
336 Specifies that in addition to public key authentication, either
337 the canonical name of the remote host or its IP address must be
338 present in the comma-separated list of patterns. See PATTERNS in
339 ssh_config(5) for more information on patterns.
341 In addition to the wildcard matching that may be applied to
342 hostnames or addresses, a from stanza may match IP addresses
343 using CIDR address/masklen notation.
345 The purpose of this option is to optionally increase security:
346 public key authentication by itself does not trust the network or
347 name servers or anything (but the key); however, if somebody
348 somehow steals the key, the key permits an intruder to log in
349 from anywhere in the world. This additional option makes using a
350 stolen key more difficult (name servers and/or routers would have
351 to be compromised in addition to just the key).
354 Forbids authentication agent forwarding when this key is used for
358 Forbids TCP forwarding when this key is used for authentication.
359 Any port forward requests by the client will return an error.
360 This might be used, e.g. in connection with the command option.
362 no-pty Prevents tty allocation (a request to allocate a pty will fail).
365 Disables execution of ~/.ssh/rc.
368 Forbids X11 forwarding when this key is used for authentication.
369 Any X11 forward requests by the client will return an error.
371 permitopen="host:port"
372 Limit local ``ssh -L'' port forwarding such that it may only
373 connect to the specified host and port. IPv6 addresses can be
374 specified by enclosing the address in square brackets. Multiple
375 permitopen options may be applied separated by commas. No
376 pattern matching is performed on the specified hostnames, they
377 must be literal domains or addresses. A port specification of *
380 principals="principals"
381 On a cert-authority line, specifies allowed principals for
382 certificate authentication as a comma-separated list. At least
383 one name from the list must appear in the certificate's list of
384 principals for the certificate to be accepted. This option is
385 ignored for keys that are not marked as trusted certificate
386 signers using the cert-authority option.
389 Force a tun(4) device on the server. Without this option, the
390 next available device will be used if the client requests a
393 An example authorized_keys file:
395 # Comments allowed at start of line
396 ssh-rsa AAAAB3Nza...LiPk== user@example.net
397 from="*.sales.example.net,!pc.sales.example.net" ssh-rsa
398 AAAAB2...19Q== john@example.net
399 command="dump /home",no-pty,no-port-forwarding ssh-dss
400 AAAAC3...51R== example.net
401 permitopen="192.0.2.1:80",permitopen="192.0.2.2:25" ssh-dss
403 tunnel="0",command="sh /etc/netstart tun0" ssh-rsa AAAA...==
406 SSH_KNOWN_HOSTS FILE FORMAT
407 The /etc/ssh/ssh_known_hosts and ~/.ssh/known_hosts files contain host
408 public keys for all known hosts. The global file should be prepared by
409 the administrator (optional), and the per-user file is maintained
410 automatically: whenever the user connects from an unknown host, its key
411 is added to the per-user file.
413 Each line in these files contains the following fields: markers
414 (optional), hostnames, bits, exponent, modulus, comment. The fields are
417 The marker is optional, but if it is present then it must be one of
418 ``@cert-authority'', to indicate that the line contains a certification
419 authority (CA) key, or ``@revoked'', to indicate that the key contained
420 on the line is revoked and must not ever be accepted. Only one marker
421 should be used on a key line.
423 Hostnames is a comma-separated list of patterns (`*' and `?' act as
424 wildcards); each pattern in turn is matched against the canonical host
425 name (when authenticating a client) or against the user-supplied name
426 (when authenticating a server). A pattern may also be preceded by `!' to
427 indicate negation: if the host name matches a negated pattern, it is not
428 accepted (by that line) even if it matched another pattern on the line.
429 A hostname or address may optionally be enclosed within `[' and `]'
430 brackets then followed by `:' and a non-standard port number.
432 Alternately, hostnames may be stored in a hashed form which hides host
433 names and addresses should the file's contents be disclosed. Hashed
434 hostnames start with a `|' character. Only one hashed hostname may
435 appear on a single line and none of the above negation or wildcard
436 operators may be applied.
438 Bits, exponent, and modulus are taken directly from the RSA host key;
439 they can be obtained, for example, from /etc/ssh/ssh_host_key.pub. The
440 optional comment field continues to the end of the line, and is not used.
442 Lines starting with `#' and empty lines are ignored as comments.
444 When performing host authentication, authentication is accepted if any
445 matching line has the proper key; either one that matches exactly or, if
446 the server has presented a certificate for authentication, the key of the
447 certification authority that signed the certificate. For a key to be
448 trusted as a certification authority, it must use the ``@cert-authority''
449 marker described above.
451 The known hosts file also provides a facility to mark keys as revoked,
452 for example when it is known that the associated private key has been
453 stolen. Revoked keys are specified by including the ``@revoked'' marker
454 at the beginning of the key line, and are never accepted for
455 authentication or as certification authorities, but instead will produce
456 a warning from ssh(1) when they are encountered.
458 It is permissible (but not recommended) to have several lines or
459 different host keys for the same names. This will inevitably happen when
460 short forms of host names from different domains are put in the file. It
461 is possible that the files contain conflicting information;
462 authentication is accepted if valid information can be found from either
465 Note that the lines in these files are typically hundreds of characters
466 long, and you definitely don't want to type in the host keys by hand.
467 Rather, generate them by a script, ssh-keyscan(1) or by taking
468 /etc/ssh/ssh_host_key.pub and adding the host names at the front.
469 ssh-keygen(1) also offers some basic automated editing for
470 ~/.ssh/known_hosts including removing hosts matching a host name and
471 converting all host names to their hashed representations.
473 An example ssh_known_hosts file:
475 # Comments allowed at start of line
476 closenet,...,192.0.2.53 1024 37 159...93 closenet.example.net
477 cvs.example.net,192.0.2.10 ssh-rsa AAAA1234.....=
479 |1|JfKTdBh7rNbXkVAQCRp4OQoPfmI=|USECr3SWf1JUPsms5AqfD5QfxkM= ssh-rsa
482 @revoked * ssh-rsa AAAAB5W...
483 # A CA key, accepted for any host in *.mydomain.com or *.mydomain.org
484 @cert-authority *.mydomain.org,*.mydomain.com ssh-rsa AAAAB5W...
488 This file is used to suppress printing the last login time and
489 /etc/motd, if PrintLastLog and PrintMotd, respectively, are
490 enabled. It does not suppress printing of the banner specified
494 This file is used for host-based authentication (see ssh(1) for
495 more information). On some machines this file may need to be
496 world-readable if the user's home directory is on an NFS
497 partition, because sshd reads it as root. Additionally, this
498 file must be owned by the user, and must not have write
499 permissions for anyone else. The recommended permission for most
500 machines is read/write for the user, and not accessible by
504 This file is used in exactly the same way as .rhosts, but allows
505 host-based authentication without permitting login with
509 This directory is the default location for all user-specific
510 configuration and authentication information. There is no
511 general requirement to keep the entire contents of this directory
512 secret, but the recommended permissions are read/write/execute
513 for the user, and not accessible by others.
515 ~/.ssh/authorized_keys
516 Lists the public keys (DSA, ECDSA, ED25519, RSA) that can be used
517 for logging in as this user. The format of this file is
518 described above. The content of the file is not highly
519 sensitive, but the recommended permissions are read/write for the
520 user, and not accessible by others.
522 If this file, the ~/.ssh directory, or the user's home directory
523 are writable by other users, then the file could be modified or
524 replaced by unauthorized users. In this case, sshd will not
525 allow it to be used unless the StrictModes option has been set to
529 This file is read into the environment at login (if it exists).
530 It can only contain empty lines, comment lines (that start with
531 `#'), and assignment lines of the form name=value. The file
532 should be writable only by the user; it need not be readable by
533 anyone else. Environment processing is disabled by default and
534 is controlled via the PermitUserEnvironment option.
537 Contains a list of host keys for all hosts the user has logged
538 into that are not already in the systemwide list of known host
539 keys. The format of this file is described above. This file
540 should be writable only by root/the owner and can, but need not
544 Contains initialization routines to be run before the user's home
545 directory becomes accessible. This file should be writable only
546 by the user, and need not be readable by anyone else.
550 Access controls that should be enforced by tcp-wrappers are
551 defined here. Further details are described in hosts_access(5).
554 This file is for host-based authentication (see ssh(1)). It
555 should only be writable by root.
558 Contains Diffie-Hellman groups used for the "Diffie-Hellman Group
559 Exchange". The file format is described in moduli(5).
565 If this file exists, sshd refuses to let anyone except root log
566 in. The contents of the file are displayed to anyone trying to
567 log in, and non-root connections are refused. The file should be
571 This file is used in exactly the same way as hosts.equiv, but
572 allows host-based authentication without permitting login with
575 /etc/ssh/ssh_host_key
576 /etc/ssh/ssh_host_dsa_key
577 /etc/ssh/ssh_host_ecdsa_key
578 /etc/ssh/ssh_host_ed25519_key
579 /etc/ssh/ssh_host_rsa_key
580 These files contain the private parts of the host keys. These
581 files should only be owned by root, readable only by root, and
582 not accessible to others. Note that sshd does not start if these
583 files are group/world-accessible.
585 /etc/ssh/ssh_host_key.pub
586 /etc/ssh/ssh_host_dsa_key.pub
587 /etc/ssh/ssh_host_ecdsa_key.pub
588 /etc/ssh/ssh_host_ed25519_key.pub
589 /etc/ssh/ssh_host_rsa_key.pub
590 These files contain the public parts of the host keys. These
591 files should be world-readable but writable only by root. Their
592 contents should match the respective private parts. These files
593 are not really used for anything; they are provided for the
594 convenience of the user so their contents can be copied to known
595 hosts files. These files are created using ssh-keygen(1).
597 /etc/ssh/ssh_known_hosts
598 Systemwide list of known host keys. This file should be prepared
599 by the system administrator to contain the public host keys of
600 all machines in the organization. The format of this file is
601 described above. This file should be writable only by root/the
602 owner and should be world-readable.
605 Contains configuration data for sshd. The file format and
606 configuration options are described in sshd_config(5).
609 Similar to ~/.ssh/rc, it can be used to specify machine-specific
610 login-time initializations globally. This file should be
611 writable only by root, and should be world-readable.
614 chroot(2) directory used by sshd during privilege separation in
615 the pre-authentication phase. The directory should not contain
616 any files and must be owned by root and not group or world-
620 Contains the process ID of the sshd listening for connections (if
621 there are several daemons running concurrently for different
622 ports, this contains the process ID of the one started last).
623 The content of this file is not sensitive; it can be world-
627 scp(1), sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1),
628 ssh-keyscan(1), chroot(2), hosts_access(5), login.conf(5), moduli(5),
629 sshd_config(5), inetd(8), sftp-server(8)
632 OpenSSH is a derivative of the original and free ssh 1.2.12 release by
633 Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo
634 de Raadt and Dug Song removed many bugs, re-added newer features and
635 created OpenSSH. Markus Friedl contributed the support for SSH protocol
636 versions 1.5 and 2.0. Niels Provos and Markus Friedl contributed support
637 for privilege separation.
640 System security is not improved unless rshd, rlogind, and rexecd are
641 disabled (thus completely disabling rlogin and rsh into the machine).
643 OpenBSD 5.5 December 7, 2013 OpenBSD 5.5
projects / FreeBSD / releng / 10.2.git / blob