- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1

[FreeBSD/releng/10.2.git] / release / picobsd / build / picobsd

#!/bin/sh -
#
# $FreeBSD$
# This file requires sysutils/makefs to run
#
# The PicoBSD build script. Invoked as
#
#       picobsd [options] image_type [site_name]
#
# CWARNFLAGS can be used to pass -Wall or similar options
#
# Where image_type is a directory with the picobsd config info,
# and ${image_type}/floppy.tree.${site_name} contains
# optional site-specific configuration.
#
# For Options, see the bottom of the file where the processing is
# done. The picobsd(8) manpage might be of some help, but code and docs
# tend to lose sync over time.
#
# This script depends on the following files:
#
# in ${PICO_TREE} :
#   Makefile.conf       Makefile used to build the kernel
#   config              shell variables, sourced here.
#   mfs.mtree           mtree config file
#   floppy.tree/        files which go on the floppy
#   mfs_tree/           files which go onto the mfs
#
# in ${MY_TREE} :
#   PICOBSD             kernel config file
#   config              shell variables, sourced here.
#   crunch.conf         crunchgen configuration
#   mfs.mtree           overrides ${PICO_TREE}/mfs.mtree
#   floppy.tree.exclude files from floppy.tree/ which we do not need here.
#   floppy.tree/        local additions to ${PICO_TREE}/mfs_free
#   floppy.tree.${site}/ same as above, site specific.
#   mfs_tree/           local additions to the mfs_free
#   buildtree.mk        optional Makefile to build an extension for floppy tree
#                       (generated in buildtree/ )

#
#--- The main entry point is at the end.
#

# There are two initialization functions:
#
# + set_defaults
#   is run on entry to the script, and is used to set default values
#   for all variables that do not depend on image type and source tree.
#
# + set_build_parameters
#   is run after command line parsing
#
# VARIABLE NAMES:
# + variables that control operation (e.g. verbosity) and are generally
#   set from the command line have o_ ("option") as a name prefix
#
# + variables that contain pathnames and values that should not change
#   have c_ ("constant") as a name prefix
#
# + variables exported to Makefiles and subshells are CAPITAL
#
# + variables local to the script are lowercase, possibly with
#   an l_ ("local") prefix.
#
# There are unfortunately exceptions:
# name, l_usrtree, l_objtree

# SRC points to your FreeBSD source tree.
# l_usrtree points to the /usr subdir for the source tree.
#     Normally /usr or ${SRC}/../usr
# l_objtree points to the obj tree. Normally ${l_usrtree}/obj-pico-${o_arch}
# c_label is either bsdlabel or disklabel
# PICO_TREE is where standard picobsd stuff resides.
#     Normally ${SRC}/release/picobsd
# You can set SRC with --src <directory>
# It is not recommended to override the other variables.

# MY_TREE (set later) is where this floppy type resides.
# BUILDDIR is the build directory

# log something on stdout if verbose.
o_verbose=0     # this needs to be here!
log() { #       message
    local foo
    [ ${o_verbose} -gt 0 ] && printf "\n*** %s\n" "$*"
    [ ${o_verbose}  -gt 1 ] && read -p "=== Press enter to continue" foo
    return 0
}

# unconditionally log and wait for input
logverbose() {  # message
    local foo
    printf "\n*** %s\n" "$*" >&2
    read -p "=== Press enter to continue" foo
    return 0
}

# set some default values for variables.
# needs to be done as the first thing in the script.

set_defaults() {        # no arguments
    # EDITOR is the editor you use
    # fd_size  floppy size in KB (default to 1440). You can use 1480,
    #   1720, 2880, etc. but beware that only 1440 and 1480 will boot
    #   from 1.44M floppy drives (1480 will not work on vmware).
    EDITOR=${EDITOR:-vi}
    fd_size=${fd_size:-1440}

    o_all_in_mfs="yes"          # put all files in mfs so you can boot
                                # and run the image via diskless boot.
    o_clean=""                  # set if you want to clean prev.builds.
    o_interactive=""            # default is interactive
    o_verbose=0                 # verbose level, 0 is silent
    o_tarv=""                   # tar verbose flag, "" or "v"
    o_init_src=""               # set to build libs and includes.
    o_makeopts=${MAKEOPTS:--s}  # make options, be silent by default
    o_no_devfs=                 # default is use devfs.
        # You should only set it when building 4.x images
    o_do_modules=""             # do not build modules
    o_arch=`uname -m`           # default to amd64 or i386 ...

    SRC="/usr/src"              # default location for sources
    c_startdir=`pwd`            # directory where we start
                                # used to lookup config and create BUILDDIR

    # XXX 6.x/7.x have a single /boot/boot block, which is the concatenation
    # of the old two. For the time being, we keep these, but this should
    # be fixed at some point.

    # blocks
    c_boot1=/boot/boot1         # boot blocks (in case you want custom ones)
    c_boot2=/boot/boot2

    c_reply=${c_reply:-`mktemp "/tmp/reply.XXXXXXXXXX"`}
                                # file where User replies will be put
    c_mnt=`mktemp -d "/tmp/picobsd.XXXXXXXXXX"`
                                # mountpoint used to build memory filesystems
    c_fs=fs.PICOBSD             # filename used for the memory filesystem
    c_img=picobsd.bin           # filename used for the picobsd image
    c_iso=picobsd.iso           # filename used for the ISO image
    generate_iso="NO"           # don't generate the iso image

    # select the right disklabel program
    case `uname -r` in
        4.*)
            c_label="disklabel"
            ;;
        *)
            c_label="bsdlabel"
            ;;
    esac

    set -e

    trap fail 2
    #trap fail 3
    #trap fail 6
    trap fail 15
}

# use the new build infrastructure to create libraries
# and also to build a specific target
create_includes_and_libraries2() { # opt_dir opt_target
    local no
    log "create_includes_and_libraries2() for ${SRC} $1"

    no="-DNO_CLEAN -DNO_PROFILE -DNO_GAMES -DNO_LIBC_R" # WITHOUT_CDDL=1"
    no="$no -DWITHOUT_CASPER"
    no="$no -DMALLOC_PRODUCTION"

    ( cd ${SRC};
    # make -DNOCLEAN -DNOPROFILE -DNOGAMES -DNOLIBC_R -DPICOBSD buildworld
    if [ -d "$1" ] ; then
        cd $1 ; ${BINMAKE} ${o_par} $2  # specific target, e.g. ld-elf.so
    else
        export MAKEOBJDIRPREFIX=${l_objtree}
        make ${o_par} $no toolchain

        # XXX do we need any of these ?
        eval export `cd ${SRC}; ${BINMAKE} -f Makefile.inc1 -V WMAKEENV`
        [ ${o_arch} != `uname -m` ] && \
            (cd ${l_objtree}; ln -s . ${o_arch}.${o_arch} || true )
    fi
    )
}


# set_type <the_type> [the_site] looks in user or system directories
# for the directory named as the first argument, reads the configuration
# files and sets variables according to the config.
# Also sets MY_TREE and BUILDDIR and SITE

set_type() {    # the_type the_site
    local a i

    log "set_type() : Type '$1' site '$2'"
    THETYPE=$1
    SITE=$2
    a=$1
    name=""     # clear in case of errors
    for i in ${c_startdir}/${a} ${PICO_TREE}/${a} ; do
        log "set_type: checking $i"
        [ -d $i -a -f $i/crunch.conf ] || continue
        # look for a kernel config file, privilege arch-specific
        l_kernconf=$i/PICOBSD.${o_arch}
        [ -f $l_kernconf ] || l_kernconf=$i/PICOBSD
        [ -f $l_kernconf ] || continue
        set -- `cat $l_kernconf | \
            awk '/^#PicoBSD/ {print $2, $3, $4, $5, $6}'`
        [ x"$1" != "x" ] || continue
        MFS_SIZE=$1
        name=`(cd $i ; pwd) `
        name=`basename $name`
        MY_TREE=$i
        BUILDDIR=${c_startdir}/build_dir-${name}-${o_arch}
        log "Matching file $name in $i"
        return ;
    done
    logverbose "Type $a NOT FOUND"
}

clean_tree() {
    log "clean_tree()"
    if [ -z "${name}" ] ; then
        echo "---> Wrong floppy type"
        exit 3
    fi
    rm -rf ${BUILDDIR}
}

# prepare a message to be printed in the dialog menus.
set_msgs() {            # OK
    log "set_msgs()"

    MSG1="Type: ${THETYPE} name $name"

    MSG="PicoBSD build -- Current parameters:\n\n\t1.  ${MSG1}\n\
\t2.  MFS size: ${MFS_SIZE} kB\n\
\t3.  Site-info: ${SITE}\n\t4.  Full-path: ${MY_TREE}\n"
}

# Main build procedure. Builds both the disk image and the ISO
build_image() {
    log "build_image() <${name}>"
    [ -n "${name}" ] || fail $? bad_type
    clear
    set_msgs
    printf "${MSG}---> We'll use the sources living in ${SRC}\n\n"

    # read config variables from a global and then a type-specific file
    # basically STAND_LINKS and MY_DEVS, but can also override other
    # variables.
    # 
    . ${PICO_TREE}/build/config
    [ -f "${MY_TREE}/config" ]          && . ${MY_TREE}/config
    [ -f "${o_additional_config}" ]     && . ${o_additional_config}

    # location of the object directory
    PICO_OBJ=${l_objtree}/picobsd/${THETYPE}
    log "PICO_OBJ is ${PICO_OBJ}"

    # create build directory and subtree
    mkdir -p ${BUILDDIR}/crunch
    # remove any old stuff
    rm -f ${BUILDDIR}/kernel.gz ${BUILDDIR}/${c_fs}
    # invoke commands to build a kernel
    do_kernel
    # fill a subdirectory with things that go into the floppy
    # (mostly /etc and similar stuff)
    populate_floppy_fs
    # populate it and produce a file with the MFS image
    populate_mfs_tree           # things which go into mfs
    # create, mount and fill a filesystem with floppy image
    fill_floppy_image # copies everything into the floppy
}

# Set build parameters interactively

main_dialog() {
  local ans i l

  log "main_dialog()"
  while true ; do
    set_msgs
    rm ${c_reply}
    dialog --menu "PicoBSD build menu -- (29 sep 2001)" 19 70 12 \
        N "--> READY, build it <---" \
        T "${MSG1}" \
        K "edit Kernel config file" \
        E "Edit crunch.conf file" \
        S "MFS Size: ${MFS_SIZE}kB" \
        F "Floppy size: ${fd_size}kB" \
        $ "Site-info: ${SITE}" \
        Q "Quit" \
        2> ${c_reply}
    ans=`cat ${c_reply}`
    rm ${c_reply}
    case ${ans} in
    T)
        l=""
        for i in ${c_startdir} ${c_startdir}/* ${PICO_TREE}/* ; do
            if [ -d $i -a -f $i/PICOBSD -a -f $i/crunch.conf ]; then
                l="$l `basename $i` `basename $i`"
            fi
        done
        log $l
        { dialog --menu "Setup the type of configuration" 12 70 5 $l \
                2> ${c_reply} && set_type "`cat ${c_reply}`" ${SITE} ; } || true
        ;;

    K) ${EDITOR} ${MY_TREE}/PICOBSD ;;

    E) ${EDITOR} ${MY_TREE}/crunch.conf ;;

    S)
        { dialog --title "MFS Size setup" --inputbox \
"MFS size depends on what you need to put on the MFS image. Typically \
ranges between 820kB (for very small bridge/router images) to \
as much as 2500kB kB for a densely packed image. \
Keep in mind that this memory is \
totally lost to other programs. Usually you want to keep \
this as small as possible. " 10 70 2> ${c_reply} \
        && MFS_SIZE=`cat ${c_reply}` ; } || true
        ;;

    \$)
        { dialog --title "Site info setup" --inputbox \
        "Please enter the full path to the directory \
        containing site-specific setup. \
        This directory tree must contain files that replace \
        standard ones in floppy.tree/ and mfs.tree/ . " \
        10 70 2> ${c_reply} && SITE=`cat ${c_reply}` ; } || true
        ;;

    F)
        { dialog --menu "Set floppy size" 15 70 4 \
            1440 "1.44MB" 1720 "1.72MB" 2880 "2.88MB" 4096 "4MB" \
                 2> ${c_reply} && fd_size=`cat ${c_reply}` ; } || true
        ;;

    N) break 2
        ;;

    Q) exit 0 ;;

    *) echo "\aUnknown option \"${ans}\". Try again."
        sleep 2
        clear
        ;;
    esac
  done
}

# Call the build procedure
# Install image
do_install() {
    log "do_install()"

    if [ "${o_interactive}" = "NO" ] ; then
        echo "+++ Build completed +++"
        cat .build.reply || true
        return
    fi
    dialog --title "Build ${THETYPE} completed" --inputbox \
"\nThe build process was completed successfuly.\n\
`cat .build.reply` \n\n\
Now we are going to install the image on the floppy.\n\
Please insert a blank floppy in /dev/fd0.\\n
WARNING: the contents of the floppy will be permanently erased!\n\
\n\
Your options:\n\
        * ^C or [Cancel] to abort,\n\
        * Enter to install ${c_img},\n\
" 20 80 2> ${c_reply}
    if [ "$?" = "0" ]; then
        echo "Writing ${c_img}..."
        dd if=${BUILDDIR}/${c_img} of=/dev/fd0.${fd_size}
    else
        echo "Ok, the image is in ${c_img}"
    fi
    echo "Done."
}


#-------------------------------------------------------------------

# invoke the picobsd Makefile to compile the kernel.
# if MODULES is set (value is irrelevant) the makefile will build modules.
do_kernel() {           # OK
    log "do_kernel() Preparing kernel \"$name\" in $MY_TREE"
    (cd $MY_TREE; export name SRC BUILDDIR # used in this makefile ;
        # export CONFIG
        export WARNS CWARNFLAGS
        [ "${o_do_modules}" = "yes" ] && export MODULES=""
        # kernel build not parallelizable yet
        ${BINMAKE} KERNCONF=${l_kernconf}       \
                -f ${PICO_TREE}/build/Makefile.conf ) || \
            fail $? missing_kernel
}

# Populate the variable part of the floppy filesystem. Must be done before
# the MFS because its content might need to be copied there as well.
#
# This involves fetching files from three subtrees, in this order:
#
#  1. a standard one, from which type-specific files are excluded;
#  2. a type-specific one;
#  3. a site-specific one.
#
# Files are first copied to a local tree and then compressed.

populate_floppy_fs() {          # OK
    local dst excl srcdir

    log "populate_floppy_fs()"
    dst=${BUILDDIR}/floppy.tree
    log "pwd=`pwd` Populating floppy filesystem..."

    rm -rf ${dst} || true       # clean relics from old compilations.
    mkdir ${dst}                # create a clean tree

    # compute exclude list for generic tree
    excl=${MY_TREE}/floppy.tree.exclude
    if [ -f ${excl} ] ; then
        log "Files excluded from generic tree: `echo;cat ${excl}`"
        excl="--exclude-from ${excl}"
    else
        excl=""
    fi
    # copy from the floppy trees into the destination
    for FLOPPY_TREE in ${PICO_TREE}/floppy.tree ${MY_TREE}/floppy.tree \
                ${MY_TREE}/floppy.tree.${SITE} ; do
        if [ -d ${FLOPPY_TREE} ] ; then
            (cd ${FLOPPY_TREE} ; tar -cf - \
                    --exclude .svn ${excl} . ) | \
                (cd ${dst} ; tar x${o_tarv}f - )
            log "Copied from ${FLOPPY_TREE}"
        fi
        excl="" # reset the exclude list.
    done

    # add local manipulation
    if [ -f ${MY_TREE}/buildtree.mk ] ; then
        log "building local floppy tree"
        ${BINMAKE} -C ${dst} -f ${MY_TREE}/buildtree.mk floppy.tree
    fi
 
    # compress the files in etc/, just in case
    # XXX this should be done in the makefile.
    # gzip returns an error if it fails to compress some file
    (cd $dst ; gzip -9 etc/*
            log "Compressed files in etc/ `echo; ls -l etc`"
    ) || true
}

# Copy the specified files to the destination filesystem.
# Each file is specified as a pair "src dst", dst is assumed to be
# a directory (and created with mkdir -p) if it has a trailing /
# Be careful to escape metacharacters.
# You can use ${CROSS} to point to the root of the cross build
# (remember that it might be incomplete)

do_copyfiles() {        # rootdir varname
        log Copy files to $1
        local root=$1
        local srcs dst
        local CROSS=${_SHLIBDIRPREFIX}
        eval set "\${${2}}"
        srcs=""
        for dst in $* ; do
                [ -z "$srcs" ] && srcs=$dst && continue
                eval srcs="$srcs"       # expand wildcard and vars
                case x"$dst" in
                */ )    mkdir -p ${root}/${dst} ;;
                # * )   mkdir -p `dirname ${root}/${dst}` ;;
                esac
                cp -p ${srcs} ${root}/${dst} || true
                srcs=""
        done
}

# do_links is a helper function to create links between programs
# in stand/
# This is done reading the names and destination from variable
# links in a config file, in the format
#       : dst names

do_links() {    # rootdir varname
        local root=$1
        local l i dst
        eval l="\${${2}}"
        dst=""
        log "Create links for ${l}"
        (cd ${root}/stand
        for i in $l ; do
            if [ "$dst" = ":" -o "$i" = ":" ] ; then
                dst=$i
            elif [ -n "${dst}" ] ; then
                ln -s ${dst} ${i}
            fi
        done
        )
}

# find_progs is a helper function to locate the named programs
# or libraries in ${o_objdir} or ${_SHLIBDIRPREFIX},
# and return the full pathnames.
# Called as "find_progs [[-L libpath] [-P binpath]] prog1 prog2 ... "
# On return it sets ${u_progs} to the list of programs, and ${u_libs}
# to the list of shared libraries used.
# 
# '-L path' can be used to specify a search path for libraries
#    (which searches in $path/lib:$path/usr/lib:$path/usr/local/lib
# '-P binpath' can be used to specify a search path for programs
#    (which searches in a lot of places in the subtree)
# -L must be the first, followed by -P
#
# You can use it e.g. in a local confign file by writing
#
#  do_copyfiles_user() {
#       local dst=$1
#       find_progs nvi sed less grep
#       cp -p ${u_progs} ${dst}/bin
#       cp -p ${u_libs} ${dst}/lib
#       mkdir -p ${dst}/libexec
#       find_progs ld-elf.so.1
#       cp -p ${u_progs} ${dst}/libexec # ignore errors
#  }

# find programs and required libraries. Accept -L libs -P path <progs>
# if no argument default to objdir/SHLIBDIRPREFIX for both
find_progs() {  # programs
        # logverbose "find_progs: called with $*"
        local i=`realpath ${o_objdir:-${_SHLIBDIRPREFIX}/..}`
        # default values for -L and -P
        local dir="-P $i"
        local ldir="-L $i"

        while [ "$1" != "" ] ; do
                if [ x"$1" = "x-L" -a -d "$2" ] ; then # set lib search path
                        ldir="-L $2"; shift; shift
                elif [ x"$1" = "x-P" -a -d "$2" ] ; then # set prog search path
                        dir="-P $2"; shift; shift
                else
                        break
                fi
        done

        # Results are returned in global variables
        u_libs=""
        u_progs="`find_progs_helper $dir $*`"
        [ -z "${u_progs}" ] && return 1 # not found, error

        # use objdump to find libraries.
        # Iterate to fetch recursive dependencies.
        local tmp="${u_progs}"
        local old_libs=""
        local pass=1
        while [ $pass -lt 10 ] ; do
                pass=$(($pass + 1))
                i="`objdump -x ${tmp} | \
                        awk '$1 == "NEEDED" { print $2 }' | sort | uniq | tr '\n' ' '`"
                if [ "$old_libs" = "$i" ] ; then
                        # logverbose "find_progs: have `echo ${u_libs} | wc -w`/`echo ${i} | wc -w` libraries for: $my_progs ($u_progs)"
                        # logverbose "they are ($i) $u_libs"
                        return 0
                else
                        # logverbose "old--- $old_libs --- new +++ $i +++"
                fi
                u_libs="`find_progs_helper $ldir $i`"
                old_libs="$i"
                tmp="$tmp $u_libs"
        done
        log "WARNING: Too many passes, giving up"
}

# prints to stdout files and libs in the search paths
find_progs_helper() {   # first arg is either -P or -L
        local ty=$1 dir=$2 ; shift; shift
        local progs="`echo $* | tr ' ' '\n' | sort -u | tr '\n' ' '`"
        # first, extract absolute pathnames or files in this directory

        # accumulate others in $names
        local names=""
        local i
        for i in $progs ; do
                [ -f "$i" ] && echo `realpath $i` && continue
                names="${names} $i"
        done
        # if nothing left, we are done
        [ -z "${names}" ] && return 0

        local depth p
        local places=""                 # places to search
        if [ x-P = "x$ty" ] ; then # search programs
                depth=2
                p=". local/bin local/sbin local/libexec \
                    bin sbin usr/bin usr/sbin libexec gnu/usr.bin \
                    secure/usr.bin secure/usr.sbin secure/libexec "
        else
                depth=3
                p="lib usr/lib gnu/lib secure/lib"
        fi
        for i in $p ; do
                i="${dir}/${i}"
                [ -d "${i}" ] && places="${places} `realpath ${i}`"
        done
        # logverbose "--- looking into $places"
        places=`echo ${places} | tr ' ' '\n' | sort -u`
        for i in $names ; do
            find ${places} -maxdepth $depth -type f -name ${i} | head -1
        done
}

# Populate the memory filesystem with binaries and non-variable
# configuration files.
# First do an mtree pass, then create directory links and device entries,
# then run crunchgen etc. to build the binary and create links.
# Then copy the specific/generic mfs_tree.
# Finally, if required, make a copy of the floppy.tree onto /fd

populate_mfs_tree() {
    local i j a dst MFS_TREE

    log "populate_mfs_tree()"
    dst=${BUILDDIR}/mfs.tree
    rm -rf ${dst} || true       # clean relics from old compilations.
    mkdir ${dst}                # create a fresh tree

    log "pwd=`pwd`, Populating MFS tree..."

    # use type-specific mfs.mtree, default to generic one.
    a=${MY_TREE}/mfs.mtree
    [ -f ${a} ] || a=${PICO_TREE}/build/mfs.mtree
    log "Running mtree using $a..."
    mtree -deU -f $a -p ${dst} > /dev/null || fail $? mtree

    # Create symlinks using relative pathnames, so it is possible
    # to follow them also when building the image.
    # Note that names in STAND_LINKS should not have a leading /
    for i in ${STAND_LINKS}; do
        j=`echo $i | sed -E 's:^[^/]+::;s:/[^/]+:../:g'`
        ln -s ${j}stand ${dst}/$i
    done
    ln -s ../../dev/null ${dst}/var/run/log
    ln -s ../../../etc/termcap ${dst}/usr/share/misc/termcap

    ### now build the crunched binaries ###
    (
    cd ${BUILDDIR}/crunch
    log "Making and installing crunch1 from `pwd` src ${SRC}..."
    a=${BUILDDIR}/crunch1.conf
    ( export BUILDDIR SRC MY_TREE PICO_OBJ ;
        ${BINMAKE} \
                -f ${PICO_TREE}/build/Makefile.conf ${BUILDDIR}/crunch.mk )
    log "Libs are ${LIBS} "
    export SRC # used by crunch.mk
    # export LIBS CFLAGS
    log "Now make -f crunch.mk"
    ${BINMAKE} ${o_makeopts} -f ${BUILDDIR}/crunch.mk
    strip --remove-section=.note --remove-section=.comment crunch1
    mv crunch1 ${dst}/stand/crunch
    chmod 555 ${dst}/stand/crunch
    log "Making links for binaries..."
    for i in `crunchgen -l $a` ; do
        ln ${dst}/stand/crunch ${dst}/stand/${i};
    done
    # rm $a # do not remove!
    ) || fail $? crunch

    log "Setting up host key for sshd:"
    for K in rsa1 rsa dsa ; do
        if [ $K = rsa1 ] ; then
            i=ssh_host_key
        else
            i=ssh_host_${K}_key
        fi
        if [ -f ${BUILDDIR}/floppy.tree/etc/$i.gz ] ; then
            log "Using existing host key $i"
        else
            log "Generating new host key $i" 
            ssh-keygen -t $K -f ${BUILDDIR}/floppy.tree/etc/$i \
                     -N "" -C "root@picobsd"
            gzip -9 ${BUILDDIR}/floppy.tree/etc/${i}* || true
        fi
    done

    log "Copy generic and site-specific MFS tree..."
    for MFS_TREE in ${PICO_TREE}/mfs_tree ${MY_TREE}/mfs_tree ; do
        if [ -d ${MFS_TREE} ] ; then
            log "Copy ${MFS_TREE} ..."
            (cd ${MFS_TREE} ; tar -cf - --exclude .svn . ) | \
                    (cd ${dst} ; tar x${o_tarv}f - )
        fi
    done

    if [ -f ${MY_TREE}/buildtree.mk ] ; then
        log "building local floppy tree"
        ${BINMAKE} -C ${dst} -f ${MY_TREE}/buildtree.mk mfs.tree
    fi

    if [ "${o_all_in_mfs}" = "yes" ]; then
        log "Copy generic floppy_tree into MFS..."
        # ignore failure in case the floppy is empty
        cp -Rp ${BUILDDIR}/floppy.tree/* ${dst}/fd || true
    fi

    # 4.x compatibility - create device nodes
    if [ -n "${o_no_devfs}" ] ; then
        # create device entries using MAKEDEV
        (cd ${dst}/dev
        ln -s ${SRC}/etc/MAKEDEV ; chmod 555 MAKEDEV
        # log `pwd`
        sh ./MAKEDEV ${MY_DEVS}
        rm MAKEDEV
        )
    fi
    if [ "`id -u`" = "0" ] ; then
        log "Fixing permissions"
        (cd ${dst}; chown -R root . )
    fi

    log "for a shared 'crunch' take libraries and dynamic loader as well"
    # /stand/crunch is our main binary, we extract its libs
    find_progs ${dst}/stand/crunch
    if [ -n "${u_libs}" ] ; then
        mkdir -p ${dst}/lib && cp -p ${u_libs} ${dst}/lib
        mkdir -p ${dst}/libexec
        create_includes_and_libraries2 libexec/rtld-elf
        find_progs ld-elf.so.1 && cp -p ${u_progs} ${dst}/libexec
    fi

    [ -n "${copy_files}" ] && do_copyfiles ${dst} copy_files
    do_copyfiles_user ${dst} || true
    [ -n "${links}" ] && do_links ${dst} links
    strip ${dst}/libexec/* ${dst}/lib/* ${dst}/stand/* 2> /dev/null || true

    # The 'import_files' mechanism is deprecated, as it requires
    # root permissions to follow the symlinks, and also does
    # not let you rename the entries.
    if [ -n "${import_files}" ] ; then
        log "importing ${import_files} into mfs"
        # We do it in a chroot environment on the target so
        # symlinks are followed correctly.
        # Make sure we have a statically linked tar there.
        mkdir -p ${dst}/rescue
        cp /rescue/tar ${dst}/rescue
        (cd ${l_usrtree}/.. ; tar cf - ${import_files} ) | \
            (chroot ${dst} /rescue/tar xPf - )
        rm -rf ${dst}/rescue
    fi

    # final step -- build the mfs image
    (cd ${BUILDDIR}
        # override the owner
        echo "/set uid=0 gid=0" > mtree.out
        mtree -ic -p ${dst} -k "" >> mtree.out
        log "mtre.out at ${BUILDDIR}/mtree.out"
        makefs -t ffs -o bsize=4096 -o fsize=512 \
                -s ${MFS_SIZE}k -f 1000 -F mtree.out ${c_fs} ${dst}
        ls -l ${c_fs} )
    log "done mfs image"
}

final_cleanup() {
    log "final_cleanup()"
    rm -rf ${c_mnt} ${c_reply} 2> /dev/null || true
}

# fail errno errcode
# This function is used to trap errors and print msgs
#
fail() {
    local errno errocode where

    errno=$1
    errcode=$2
    where=$3
    echo "---> fail: Error <${errno}> error code <${errcode}> in <${where}>"
    case ${errcode} in
    mtree)
        echo "Error while making hierarchy in ${c_mnt}"
        ;;
    crunch)
        echo "Error while building ${name}."
        ;;
    missing_kernel)
        echo "Error: you must build PICOBSD${suffix} kernel first"
        ;;
    includes)
        echo "Error: failed while making includes"
        ;;
    libraries)
        echo "Error: failed while making libraries"
        ;;
    bad_type)
        echo "Error: unknown floppy type ${name}"
        ;;
    no_space)
        echo "Error: no space left on device (${where})"
        ;;
    no_mfs)
        echo "Error: while writing MFS into the kernel."
        ;;
    "")
        echo "User break"
        errcode="userbreak"
        ;;
    *)
        echo "unknown error, maybe user break: $errno $errcode"
        ;;
    esac
    echo "---> Aborting $0"
    # try to cleanup the vnode.
    final_cleanup
    exit 2
}

fill_floppy_image() {
    local blocks dst mfs_start mfs_end mfs_size img_size

    log "fill_floppy_image()"
    dst=${c_mnt}        # where to create the image

    log "Preparing ${fd_size}kB floppy filesystem..."

    # correct blocks according to size.
    blocks=${fd_size};
    if [ "${blocks}" = "1720" ]; then
        blocks=1722
    elif [ "${blocks}" = "1480" ]; then
        blocks=1476
    fi

    log "Labeling floppy image"

    dst=${BUILDDIR}/image.tree
    rm -rf ${dst}
    mkdir -p ${dst}
    (
    cd ${BUILDDIR}
    set 0 0 # reset variables
    # $1 takes the offset of the MFS filesystem
    set `strings -at d kernel | grep "MFS Filesystem goes here"`
    mfs_start=$1
    set 0 0 # reset variables
    set `strings -at d kernel | grep "MFS Filesystem had better"`
    mfs_end=$1
    mfs_size="$((${mfs_end} - ${mfs_start}))"
    set -- `ls -l ${c_fs}`; imgsize="$5"
    if [ ${mfs_start} -gt 0 -a ${mfs_size} -ge ${imgsize} ] ; then
        mfs_ofs=$((${mfs_start} + 8192))
        log "Preload kernel with file ${c_fs} at ${mfs_ofs}"
        log "`ls -l ${c_fs}` to fit in ${mfs_size}"
        dd if=${c_fs} ibs=8192 iseek=1 of=kernel obs=${mfs_ofs} \
            oseek=1 conv=notrunc # 2> /dev/null
    else
        log "not loading mfs, size ${mfs_size} img ${imgsize}"
    fi
    log "Compress with gzip and copy to floppy image"

    mkdir -p  ${dst}/boot/kernel
    # XXX loader.conf does not work unless we also load the .4th files
    # echo "hint.acpi.0.disabled=\"1\"" > ${dst}/boot/loader.conf
    # echo "console=\"comconsole\"" >> ${dst}/boot/loader.conf
    local blf="loader* *.4th" # loader.rc loader.4th support.4th"
    (cd /boot; cp -p loader ${dst}/boot) || fail $? no_space "copying bootloader"
    cp ${MY_TREE}/floppy.tree/boot/loader.conf ${dst}/boot || true
    gzip -c kernel > ${dst}/boot/kernel/kernel.gz || fail $? no_space "copying kernel"

    # now transfer the floppy tree. If it is already in mfs, dont bother.
    if [ "${o_all_in_mfs}" != "yes" ] ; then
        log "Now transfer floppy tree if not already in MFS image"
        cp -Rp floppy.tree/* ${dst} || \
                fail $? no_space "copying floppy tree"
    fi
    )

    # add local manipulation to the image
    if [ -f ${MY_TREE}/buildtree.mk ] ; then
        ${BINMAKE} -C ${dst} -f ${MY_TREE}/buildtree.mk image.tree
    fi

    log "image used `du -s ${dst}` of ${blocks}k"
    if [ "${generate_iso}" = "YES" ]; then
        logverbose "generate_iso ${generate_iso}"
        # build_iso_image       # XXX not implemented yet
        (cd ${BUILDDIR}
        cp -p /boot/cdboot ${dst}/boot || fail $? no_space "copying cdboot"
        mkisofs -b boot/cdboot -no-emul-boot -J -r -ldots -l -L \
                -o ${c_iso} ${dst}
        )
    fi

    (cd ${BUILDDIR}
    makefs -t ffs -o bsize=4096 -o fsize=512 \
        -s ${blocks}k -f 50 ${c_img} ${dst}

    ${c_label} -w -f `pwd`/${c_img} auto # write in a label
    # copy partition c: into a: with some sed magic
    ${c_label} -f `pwd`/${c_img} | sed -e '/  c:/{p;s/c:/a:/;}' | \
        ${c_label} -R -f `pwd`/${c_img} /dev/stdin
    ${c_label} -f `pwd`/${c_img}

    ls -l ${c_img}
    ${c_label} -f `pwd`/${c_img}
    log "after disklabel"
    )

    echo "BUILDDIR ${BUILDDIR}"

    # dump the primary and secondary boot
    # XXX primary is 512 bytes
    dd if=${c_boot1} of=${BUILDDIR}/${c_img} conv=notrunc 2>/dev/null
    # XXX secondary starts after the 0x114 = dec 276 bytes of the label
    # so we skip 276 from the source, and 276+512=788 from dst
    # the old style blocks used 512 and 1024 respectively

    dd if=${c_boot2} iseek=1 ibs=276 2> /dev/null | \
        dd of=${BUILDDIR}/${c_img} oseek=1 obs=788 conv=notrunc 2>/dev/null
    log "done disk image"
    # XXX (log "Fixing permissions"; cd ${dst}; chown -R root *)
    df -ik ${dst} | colrm 70 > .build.reply
    # leave build stuff if verbose
    [ ${o_verbose} -gt 0 ] && return

    rm -rf ${BUILDDIR}/floppy.tree || true # cleanup
    rm -rf ${dst}
    rm ${BUILDDIR}/${c_fs}
    # rm ${BUILDDIR}/kernel.gz
}

# This function creates variables which depend on the source tree in use:
# SRC, l_usrtree, l_objtree
# Optionally creates libraries, includes and the like (for cross compiles,
# needs to be done once).

set_build_parameters() {
    if [ "${SRC}" = "/usr/src" ] ; then
        l_usrtree=${USR:-/usr}
    else
        l_usrtree=${USR:-${SRC}/../usr}
    fi
    l_objtree=${l_usrtree}/obj-pico-${o_arch}

    PICO_TREE=${PICO_TREE:-${SRC}/release/picobsd}
    set `grep "#define[\t ]__FreeBSD_version" ${SRC}/sys/sys/param.h`
    OSVERSION=$3
    log "OSVERSION is ${OSVERSION}"

        export MAKEOBJDIRPREFIX=${l_objtree}
        export TARGET_ARCH=${o_arch} TARGET=${o_arch}
        # XXX 20131001 see if CLANG fixes the build
        export WITHOUT_CLANG_IS_CC=yes
        export WITHOUT_CLANG_BOOTSTRAP=yes
        export WITH_GCC=yes
        export WITH_GCC_BOOTSTRAP=yes
        export WITH_GNUCXX=yes
        export WITHOUT_CLANG=yes
        export WITHOUT_ICONV=yes

        # XXX why change machine_arch ?
        #-- export MACHINE_ARCH=`uname -m` MACHINE=`uname -m`
        # export CWARNFLAGS="-Wextra -Wno-sign-compare -Wno-missing-field-initializers"
        # XXX BINMAKE does not really exist anymore
        eval "export BINMAKE=\"`cd ${SRC}; make -f Makefile -V BINMAKE`\""
        [ "$BINMAKE" = "" ] && \
           eval "export BINMAKE=\"`cd ${SRC}; make -f Makefile -V SUB_MAKE`\""

    if [ "${o_init_src}" != "" ] ; then
        create_includes_and_libraries2
    else
        eval export `cd ${SRC}; ${BINMAKE} -f Makefile.inc1 -V WMAKEENV`
    fi

    # if we have o_objdir, find where bin/ is
    if [ ! -z "${o_objdir}" ] ; then
        if [ -d ${o_objdir}/bin ] ; then
            # fine
        elif [ -d "${o_objdir}${SRC}/bin" ] ; then
            o_objdir="${o_objdir}${SRC}"
            log "Changing objdir to ${o_objdir}"
        else
            log "Cannot find objdir in ${o_objdir}, sorry"
            o_objdir=""
        fi
    fi
}

#-------------------------------------------------------------------
# Main entry of the script. Initialize variables, parse command line
# arguments.


set_defaults
while [ true ]; do
    log "Parsing $1"
    case $1 in
    -j)
        o_par="-j $2"
        shift
        ;;

    --par)
        o_par="-j 8"    # watch out, this might be too large
        ;;

    --src)      # set the source path instead of /usr/src
        SRC=`realpath $2`
        shift
        ;;

    --init)     # run a partial buildworld on the source tree
        o_init_src="YES"
        ;;

    --arch)     # override the target architecture
        o_arch=$2
        shift
        ;;

    --floppy_size)      # image size
        fd_size=$2
        shift
        ;;

    --all_in_mfs)
        o_all_in_mfs="yes"
        ;;

    --no_all_in_mfs)
        o_all_in_mfs="no"
        ;;

    --modules)  # also build kernel modules
        o_do_modules="yes"
        ;;

    -n)
        o_interactive="NO"
        ;;

    -clear|-clean|-c) # clean
        o_clean="YES"
        o_interactive="NO"
        ;;

    -v) # need -v -v to wait for user input
        o_verbose=$((${o_verbose}+1))   # verbose level
        o_tarv="v"                      # tar verbose flag
        o_makeopts="-d l" # be verbose
        ;;

    --iso) # generate iso image
        generate_iso="YES"
        ;;

    --cfg) # read additional config from this file
        o_additional_config=`realpath $2`
        shift
        ;;

    --objdir)   # Place with results of a previous buildworld
                # useful if you want to copy shared binaries and libs
        o_objdir=`realpath $2`
        shift
        ;;

    *)
        break
        ;;

    esac
    shift
done

set_build_parameters    # things that depend on ${SRC}
set_type $1 $2          # type and site, respectively

[ "${o_interactive}" != "NO" ] && main_dialog

if [ "${o_clean}" = "YES" ] ; then
    clean_tree
else
    build_image
    do_install
fi
final_cleanup
exit 0