sys/boot/fdt/dts/arm/wandboard-solo.dts

   1 /*
   2  * Copyright (c) 2013 Ian Lepore
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  *
  14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  17  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  24  * SUCH DAMAGE.
  25  *
  26  * Wandboard Solo.
  27  *
  28  * $FreeBSD$
  29  */
  30
  31 /dts-v1/;
  32 /include/ "imx6.dtsi"
  33
  34 / {
  35         #address-cells = <1>;
  36         #size-cells = <1>;
  37
  38         model = "Wandboard Solo";
  39         compatible = "wand,imx6s-wandboard", "fsl,imx6s";
  40
  41         memory {
  42                 reg = <0x10000000 0x20000000>; /* RAM 512M */
  43         };
  44
  45         SOC: soc@00000000 {
  46                 aips@02000000 { /* AIPS1 */
  47                         gpio@0209c000           { status = "okay"; };
  48                         gpio@020a0000           { status = "okay"; };
  49                         gpio@020a4000           { status = "okay"; };
  50                         gpio@020a8000           { status = "okay"; };
  51                         gpio@020ac000           { status = "okay"; };
  52                         gpio@020b0000           { status = "okay"; };
  53                         gpio@020b4000           { status = "okay"; };
  54                         console:serial@02020000 { status = "okay"; };
  55                         serial@021e8000         { status = "disabled"; };
  56                         serial@021ec000         { status = "disabled"; };
  57                         serial@021f0000         { status = "disabled"; };
  58                         serial@021f4000         { status = "disabled"; };
  59                         usbphy@020c9000         { status = "okay"; };
  60                         usbphy@020ca000         { status = "okay"; };
  61                 };
  62                 aips@02100000 { /* AIPS2 */
  63                         ethernet@02188000       {
  64                                 status = "okay";
  65                                 phy-mode = "rgmii";
  66                                 phy-disable-preamble;
  67                         };
  68                         usb@02184000            { status = "okay"; };
  69                         usb@02184200            { status = "okay"; };
  70                         usb@02184400            { status = "disabled"; };
  71                         usb@02184600            { status = "disabled"; };
  72                         usdhc@02190000          { status = "okay"; };
  73                         usdhc@02194000          { status = "disabled"; };
  74                         usdhc@02198000          { status = "okay"; };
  75                         usdhc@0219c000          { status = "disabled"; };
  76                 };
  77         };
  78
  79         chosen {
  80                 stdin = &console;
  81                 stdout = &console;
  82         };
  83 };