sys/cddl/contrib/opensolaris/uts/common/fs/zfs/bpobj.c

   1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9  * or http://www.opensolaris.org/os/licensing.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21 /*
  22  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
  23  * Copyright (c) 2013 by Delphix. All rights reserved.
  24  */
  25
  26 #include <sys/bpobj.h>
  27 #include <sys/zfs_context.h>
  28 #include <sys/refcount.h>
  29 #include <sys/dsl_pool.h>
  30 #include <sys/zfeature.h>
  31 #include <sys/zap.h>
  32
  33 /*
  34  * Return an empty bpobj, preferably the empty dummy one (dp_empty_bpobj).
  35  */
  36 uint64_t
  37 bpobj_alloc_empty(objset_t *os, int blocksize, dmu_tx_t *tx)
  38 {
  39         spa_t *spa = dmu_objset_spa(os);
  40         dsl_pool_t *dp = dmu_objset_pool(os);
  41
  42         if (spa_feature_is_enabled(spa, SPA_FEATURE_EMPTY_BPOBJ)) {
  43                 if (!spa_feature_is_active(spa, SPA_FEATURE_EMPTY_BPOBJ)) {
  44                         ASSERT0(dp->dp_empty_bpobj);
  45                         dp->dp_empty_bpobj =
  46                             bpobj_alloc(os, SPA_OLD_MAXBLOCKSIZE, tx);
  47                         VERIFY(zap_add(os,
  48                             DMU_POOL_DIRECTORY_OBJECT,
  49                             DMU_POOL_EMPTY_BPOBJ, sizeof (uint64_t), 1,
  50                             &dp->dp_empty_bpobj, tx) == 0);
  51                 }
  52                 spa_feature_incr(spa, SPA_FEATURE_EMPTY_BPOBJ, tx);
  53                 ASSERT(dp->dp_empty_bpobj != 0);
  54                 return (dp->dp_empty_bpobj);
  55         } else {
  56                 return (bpobj_alloc(os, blocksize, tx));
  57         }
  58 }
  59
  60 void
  61 bpobj_decr_empty(objset_t *os, dmu_tx_t *tx)
  62 {
  63         dsl_pool_t *dp = dmu_objset_pool(os);
  64
  65         spa_feature_decr(dmu_objset_spa(os), SPA_FEATURE_EMPTY_BPOBJ, tx);
  66         if (!spa_feature_is_active(dmu_objset_spa(os),
  67             SPA_FEATURE_EMPTY_BPOBJ)) {
  68                 VERIFY3U(0, ==, zap_remove(dp->dp_meta_objset,
  69                     DMU_POOL_DIRECTORY_OBJECT,
  70                     DMU_POOL_EMPTY_BPOBJ, tx));
  71                 VERIFY3U(0, ==, dmu_object_free(os, dp->dp_empty_bpobj, tx));
  72                 dp->dp_empty_bpobj = 0;
  73         }
  74 }
  75
  76 uint64_t
  77 bpobj_alloc(objset_t *os, int blocksize, dmu_tx_t *tx)
  78 {
  79         int size;
  80
  81         if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_BPOBJ_ACCOUNT)
  82                 size = BPOBJ_SIZE_V0;
  83         else if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_DEADLISTS)
  84                 size = BPOBJ_SIZE_V1;
  85         else
  86                 size = sizeof (bpobj_phys_t);
  87
  88         return (dmu_object_alloc(os, DMU_OT_BPOBJ, blocksize,
  89             DMU_OT_BPOBJ_HDR, size, tx));
  90 }
  91
  92 void
  93 bpobj_free(objset_t *os, uint64_t obj, dmu_tx_t *tx)
  94 {
  95         int64_t i;
  96         bpobj_t bpo;
  97         dmu_object_info_t doi;
  98         int epb;
  99         dmu_buf_t *dbuf = NULL;
 100
 101         ASSERT(obj != dmu_objset_pool(os)->dp_empty_bpobj);
 102         VERIFY3U(0, ==, bpobj_open(&bpo, os, obj));
 103
 104         mutex_enter(&bpo.bpo_lock);
 105
 106         if (!bpo.bpo_havesubobj || bpo.bpo_phys->bpo_subobjs == 0)
 107                 goto out;
 108
 109         VERIFY3U(0, ==, dmu_object_info(os, bpo.bpo_phys->bpo_subobjs, &doi));
 110         epb = doi.doi_data_block_size / sizeof (uint64_t);
 111
 112         for (i = bpo.bpo_phys->bpo_num_subobjs - 1; i >= 0; i--) {
 113                 uint64_t *objarray;
 114                 uint64_t offset, blkoff;
 115
 116                 offset = i * sizeof (uint64_t);
 117                 blkoff = P2PHASE(i, epb);
 118
 119                 if (dbuf == NULL || dbuf->db_offset > offset) {
 120                         if (dbuf)
 121                                 dmu_buf_rele(dbuf, FTAG);
 122                         VERIFY3U(0, ==, dmu_buf_hold(os,
 123                             bpo.bpo_phys->bpo_subobjs, offset, FTAG, &dbuf, 0));
 124                 }
 125
 126                 ASSERT3U(offset, >=, dbuf->db_offset);
 127                 ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
 128
 129                 objarray = dbuf->db_data;
 130                 bpobj_free(os, objarray[blkoff], tx);
 131         }
 132         if (dbuf) {
 133                 dmu_buf_rele(dbuf, FTAG);
 134                 dbuf = NULL;
 135         }
 136         VERIFY3U(0, ==, dmu_object_free(os, bpo.bpo_phys->bpo_subobjs, tx));
 137
 138 out:
 139         mutex_exit(&bpo.bpo_lock);
 140         bpobj_close(&bpo);
 141
 142         VERIFY3U(0, ==, dmu_object_free(os, obj, tx));
 143 }
 144
 145 int
 146 bpobj_open(bpobj_t *bpo, objset_t *os, uint64_t object)
 147 {
 148         dmu_object_info_t doi;
 149         int err;
 150
 151         err = dmu_object_info(os, object, &doi);
 152         if (err)
 153                 return (err);
 154
 155         bzero(bpo, sizeof (*bpo));
 156         mutex_init(&bpo->bpo_lock, NULL, MUTEX_DEFAULT, NULL);
 157
 158         ASSERT(bpo->bpo_dbuf == NULL);
 159         ASSERT(bpo->bpo_phys == NULL);
 160         ASSERT(object != 0);
 161         ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ);
 162         ASSERT3U(doi.doi_bonus_type, ==, DMU_OT_BPOBJ_HDR);
 163
 164         err = dmu_bonus_hold(os, object, bpo, &bpo->bpo_dbuf);
 165         if (err)
 166                 return (err);
 167
 168         bpo->bpo_os = os;
 169         bpo->bpo_object = object;
 170         bpo->bpo_epb = doi.doi_data_block_size >> SPA_BLKPTRSHIFT;
 171         bpo->bpo_havecomp = (doi.doi_bonus_size > BPOBJ_SIZE_V0);
 172         bpo->bpo_havesubobj = (doi.doi_bonus_size > BPOBJ_SIZE_V1);
 173         bpo->bpo_phys = bpo->bpo_dbuf->db_data;
 174         return (0);
 175 }
 176
 177 void
 178 bpobj_close(bpobj_t *bpo)
 179 {
 180         /* Lame workaround for closing a bpobj that was never opened. */
 181         if (bpo->bpo_object == 0)
 182                 return;
 183
 184         dmu_buf_rele(bpo->bpo_dbuf, bpo);
 185         if (bpo->bpo_cached_dbuf != NULL)
 186                 dmu_buf_rele(bpo->bpo_cached_dbuf, bpo);
 187         bpo->bpo_dbuf = NULL;
 188         bpo->bpo_phys = NULL;
 189         bpo->bpo_cached_dbuf = NULL;
 190         bpo->bpo_object = 0;
 191
 192         mutex_destroy(&bpo->bpo_lock);
 193 }
 194
 195 static boolean_t
 196 bpobj_hasentries(bpobj_t *bpo)
 197 {
 198         return (bpo->bpo_phys->bpo_num_blkptrs != 0 ||
 199             (bpo->bpo_havesubobj && bpo->bpo_phys->bpo_num_subobjs != 0));
 200 }
 201
 202 static int
 203 bpobj_iterate_impl(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx,
 204     boolean_t free)
 205 {
 206         dmu_object_info_t doi;
 207         int epb;
 208         int64_t i;
 209         int err = 0;
 210         dmu_buf_t *dbuf = NULL;
 211
 212         mutex_enter(&bpo->bpo_lock);
 213
 214         if (free)
 215                 dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
 216
 217         for (i = bpo->bpo_phys->bpo_num_blkptrs - 1; i >= 0; i--) {
 218                 blkptr_t *bparray;
 219                 blkptr_t *bp;
 220                 uint64_t offset, blkoff;
 221
 222                 offset = i * sizeof (blkptr_t);
 223                 blkoff = P2PHASE(i, bpo->bpo_epb);
 224
 225                 if (dbuf == NULL || dbuf->db_offset > offset) {
 226                         if (dbuf)
 227                                 dmu_buf_rele(dbuf, FTAG);
 228                         err = dmu_buf_hold(bpo->bpo_os, bpo->bpo_object, offset,
 229                             FTAG, &dbuf, 0);
 230                         if (err)
 231                                 break;
 232                 }
 233
 234                 ASSERT3U(offset, >=, dbuf->db_offset);
 235                 ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
 236
 237                 bparray = dbuf->db_data;
 238                 bp = &bparray[blkoff];
 239                 err = func(arg, bp, tx);
 240                 if (err)
 241                         break;
 242                 if (free) {
 243                         bpo->bpo_phys->bpo_bytes -=
 244                             bp_get_dsize_sync(dmu_objset_spa(bpo->bpo_os), bp);
 245                         ASSERT3S(bpo->bpo_phys->bpo_bytes, >=, 0);
 246                         if (bpo->bpo_havecomp) {
 247                                 bpo->bpo_phys->bpo_comp -= BP_GET_PSIZE(bp);
 248                                 bpo->bpo_phys->bpo_uncomp -= BP_GET_UCSIZE(bp);
 249                         }
 250                         bpo->bpo_phys->bpo_num_blkptrs--;
 251                         ASSERT3S(bpo->bpo_phys->bpo_num_blkptrs, >=, 0);
 252                 }
 253         }
 254         if (dbuf) {
 255                 dmu_buf_rele(dbuf, FTAG);
 256                 dbuf = NULL;
 257         }
 258         if (free) {
 259                 i++;
 260                 VERIFY3U(0, ==, dmu_free_range(bpo->bpo_os, bpo->bpo_object,
 261                     i * sizeof (blkptr_t), -1ULL, tx));
 262         }
 263         if (err || !bpo->bpo_havesubobj || bpo->bpo_phys->bpo_subobjs == 0)
 264                 goto out;
 265
 266         ASSERT(bpo->bpo_havecomp);
 267         err = dmu_object_info(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs, &doi);
 268         if (err) {
 269                 mutex_exit(&bpo->bpo_lock);
 270                 return (err);
 271         }
 272         ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ_SUBOBJ);
 273         epb = doi.doi_data_block_size / sizeof (uint64_t);
 274
 275         for (i = bpo->bpo_phys->bpo_num_subobjs - 1; i >= 0; i--) {
 276                 uint64_t *objarray;
 277                 uint64_t offset, blkoff;
 278                 bpobj_t sublist;
 279                 uint64_t used_before, comp_before, uncomp_before;
 280                 uint64_t used_after, comp_after, uncomp_after;
 281
 282                 offset = i * sizeof (uint64_t);
 283                 blkoff = P2PHASE(i, epb);
 284
 285                 if (dbuf == NULL || dbuf->db_offset > offset) {
 286                         if (dbuf)
 287                                 dmu_buf_rele(dbuf, FTAG);
 288                         err = dmu_buf_hold(bpo->bpo_os,
 289                             bpo->bpo_phys->bpo_subobjs, offset, FTAG, &dbuf, 0);
 290                         if (err)
 291                                 break;
 292                 }
 293
 294                 ASSERT3U(offset, >=, dbuf->db_offset);
 295                 ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
 296
 297                 objarray = dbuf->db_data;
 298                 err = bpobj_open(&sublist, bpo->bpo_os, objarray[blkoff]);
 299                 if (err)
 300                         break;
 301                 if (free) {
 302                         err = bpobj_space(&sublist,
 303                             &used_before, &comp_before, &uncomp_before);
 304                         if (err)
 305                                 break;
 306                 }
 307                 err = bpobj_iterate_impl(&sublist, func, arg, tx, free);
 308                 if (free) {
 309                         VERIFY3U(0, ==, bpobj_space(&sublist,
 310                             &used_after, &comp_after, &uncomp_after));
 311                         bpo->bpo_phys->bpo_bytes -= used_before - used_after;
 312                         ASSERT3S(bpo->bpo_phys->bpo_bytes, >=, 0);
 313                         bpo->bpo_phys->bpo_comp -= comp_before - comp_after;
 314                         bpo->bpo_phys->bpo_uncomp -=
 315                             uncomp_before - uncomp_after;
 316                 }
 317
 318                 bpobj_close(&sublist);
 319                 if (err)
 320                         break;
 321                 if (free) {
 322                         err = dmu_object_free(bpo->bpo_os,
 323                             objarray[blkoff], tx);
 324                         if (err)
 325                                 break;
 326                         bpo->bpo_phys->bpo_num_subobjs--;
 327                         ASSERT3S(bpo->bpo_phys->bpo_num_subobjs, >=, 0);
 328                 }
 329         }
 330         if (dbuf) {
 331                 dmu_buf_rele(dbuf, FTAG);
 332                 dbuf = NULL;
 333         }
 334         if (free) {
 335                 VERIFY3U(0, ==, dmu_free_range(bpo->bpo_os,
 336                     bpo->bpo_phys->bpo_subobjs,
 337                     (i + 1) * sizeof (uint64_t), -1ULL, tx));
 338         }
 339
 340 out:
 341         /* If there are no entries, there should be no bytes. */
 342         if (!bpobj_hasentries(bpo)) {
 343                 ASSERT0(bpo->bpo_phys->bpo_bytes);
 344                 ASSERT0(bpo->bpo_phys->bpo_comp);
 345                 ASSERT0(bpo->bpo_phys->bpo_uncomp);
 346         }
 347
 348         mutex_exit(&bpo->bpo_lock);
 349         return (err);
 350 }
 351
 352 /*
 353  * Iterate and remove the entries.  If func returns nonzero, iteration
 354  * will stop and that entry will not be removed.
 355  */
 356 int
 357 bpobj_iterate(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx)
 358 {
 359         return (bpobj_iterate_impl(bpo, func, arg, tx, B_TRUE));
 360 }
 361
 362 /*
 363  * Iterate the entries.  If func returns nonzero, iteration will stop.
 364  */
 365 int
 366 bpobj_iterate_nofree(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx)
 367 {
 368         return (bpobj_iterate_impl(bpo, func, arg, tx, B_FALSE));
 369 }
 370
 371 void
 372 bpobj_enqueue_subobj(bpobj_t *bpo, uint64_t subobj, dmu_tx_t *tx)
 373 {
 374         bpobj_t subbpo;
 375         uint64_t used, comp, uncomp, subsubobjs;
 376
 377         ASSERT(bpo->bpo_havesubobj);
 378         ASSERT(bpo->bpo_havecomp);
 379         ASSERT(bpo->bpo_object != dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj);
 380
 381         if (subobj == dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj) {
 382                 bpobj_decr_empty(bpo->bpo_os, tx);
 383                 return;
 384         }
 385
 386         VERIFY3U(0, ==, bpobj_open(&subbpo, bpo->bpo_os, subobj));
 387         VERIFY3U(0, ==, bpobj_space(&subbpo, &used, &comp, &uncomp));
 388
 389         if (!bpobj_hasentries(&subbpo)) {
 390                 /* No point in having an empty subobj. */
 391                 bpobj_close(&subbpo);
 392                 bpobj_free(bpo->bpo_os, subobj, tx);
 393                 return;
 394         }
 395
 396         dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
 397         if (bpo->bpo_phys->bpo_subobjs == 0) {
 398                 bpo->bpo_phys->bpo_subobjs = dmu_object_alloc(bpo->bpo_os,
 399                     DMU_OT_BPOBJ_SUBOBJ, SPA_OLD_MAXBLOCKSIZE,
 400                     DMU_OT_NONE, 0, tx);
 401         }
 402
 403         dmu_object_info_t doi;
 404         ASSERT0(dmu_object_info(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs, &doi));
 405         ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ_SUBOBJ);
 406
 407         mutex_enter(&bpo->bpo_lock);
 408         dmu_write(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs,
 409             bpo->bpo_phys->bpo_num_subobjs * sizeof (subobj),
 410             sizeof (subobj), &subobj, tx);
 411         bpo->bpo_phys->bpo_num_subobjs++;
 412
 413         /*
 414          * If subobj has only one block of subobjs, then move subobj's
 415          * subobjs to bpo's subobj list directly.  This reduces
 416          * recursion in bpobj_iterate due to nested subobjs.
 417          */
 418         subsubobjs = subbpo.bpo_phys->bpo_subobjs;
 419         if (subsubobjs != 0) {
 420                 dmu_object_info_t doi;
 421
 422                 VERIFY3U(0, ==, dmu_object_info(bpo->bpo_os, subsubobjs, &doi));
 423                 if (doi.doi_max_offset == doi.doi_data_block_size) {
 424                         dmu_buf_t *subdb;
 425                         uint64_t numsubsub = subbpo.bpo_phys->bpo_num_subobjs;
 426
 427                         VERIFY3U(0, ==, dmu_buf_hold(bpo->bpo_os, subsubobjs,
 428                             0, FTAG, &subdb, 0));
 429                         /*
 430                          * Make sure that we are not asking dmu_write()
 431                          * to write more data than we have in our buffer.
 432                          */
 433                         VERIFY3U(subdb->db_size, >=,
 434                             numsubsub * sizeof (subobj));
 435                         dmu_write(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs,
 436                             bpo->bpo_phys->bpo_num_subobjs * sizeof (subobj),
 437                             numsubsub * sizeof (subobj), subdb->db_data, tx);
 438                         dmu_buf_rele(subdb, FTAG);
 439                         bpo->bpo_phys->bpo_num_subobjs += numsubsub;
 440
 441                         dmu_buf_will_dirty(subbpo.bpo_dbuf, tx);
 442                         subbpo.bpo_phys->bpo_subobjs = 0;
 443                         VERIFY3U(0, ==, dmu_object_free(bpo->bpo_os,
 444                             subsubobjs, tx));
 445                 }
 446         }
 447         bpo->bpo_phys->bpo_bytes += used;
 448         bpo->bpo_phys->bpo_comp += comp;
 449         bpo->bpo_phys->bpo_uncomp += uncomp;
 450         mutex_exit(&bpo->bpo_lock);
 451
 452         bpobj_close(&subbpo);
 453 }
 454
 455 void
 456 bpobj_enqueue(bpobj_t *bpo, const blkptr_t *bp, dmu_tx_t *tx)
 457 {
 458         blkptr_t stored_bp = *bp;
 459         uint64_t offset;
 460         int blkoff;
 461         blkptr_t *bparray;
 462
 463         ASSERT(!BP_IS_HOLE(bp));
 464         ASSERT(bpo->bpo_object != dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj);
 465
 466         if (BP_IS_EMBEDDED(bp)) {
 467                 /*
 468                  * The bpobj will compress better without the payload.
 469                  *
 470                  * Note that we store EMBEDDED bp's because they have an
 471                  * uncompressed size, which must be accounted for.  An
 472                  * alternative would be to add their size to bpo_uncomp
 473                  * without storing the bp, but that would create additional
 474                  * complications: bpo_uncomp would be inconsistent with the
 475                  * set of BP's stored, and bpobj_iterate() wouldn't visit
 476                  * all the space accounted for in the bpobj.
 477                  */
 478                 bzero(&stored_bp, sizeof (stored_bp));
 479                 stored_bp.blk_prop = bp->blk_prop;
 480                 stored_bp.blk_birth = bp->blk_birth;
 481         } else if (!BP_GET_DEDUP(bp)) {
 482                 /* The bpobj will compress better without the checksum */
 483                 bzero(&stored_bp.blk_cksum, sizeof (stored_bp.blk_cksum));
 484         }
 485
 486         /* We never need the fill count. */
 487         stored_bp.blk_fill = 0;
 488
 489         mutex_enter(&bpo->bpo_lock);
 490
 491         offset = bpo->bpo_phys->bpo_num_blkptrs * sizeof (stored_bp);
 492         blkoff = P2PHASE(bpo->bpo_phys->bpo_num_blkptrs, bpo->bpo_epb);
 493
 494         if (bpo->bpo_cached_dbuf == NULL ||
 495             offset < bpo->bpo_cached_dbuf->db_offset ||
 496             offset >= bpo->bpo_cached_dbuf->db_offset +
 497             bpo->bpo_cached_dbuf->db_size) {
 498                 if (bpo->bpo_cached_dbuf)
 499                         dmu_buf_rele(bpo->bpo_cached_dbuf, bpo);
 500                 VERIFY3U(0, ==, dmu_buf_hold(bpo->bpo_os, bpo->bpo_object,
 501                     offset, bpo, &bpo->bpo_cached_dbuf, 0));
 502         }
 503
 504         dmu_buf_will_dirty(bpo->bpo_cached_dbuf, tx);
 505         bparray = bpo->bpo_cached_dbuf->db_data;
 506         bparray[blkoff] = stored_bp;
 507
 508         dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
 509         bpo->bpo_phys->bpo_num_blkptrs++;
 510         bpo->bpo_phys->bpo_bytes +=
 511             bp_get_dsize_sync(dmu_objset_spa(bpo->bpo_os), bp);
 512         if (bpo->bpo_havecomp) {
 513                 bpo->bpo_phys->bpo_comp += BP_GET_PSIZE(bp);
 514                 bpo->bpo_phys->bpo_uncomp += BP_GET_UCSIZE(bp);
 515         }
 516         mutex_exit(&bpo->bpo_lock);
 517 }
 518
 519 struct space_range_arg {
 520         spa_t *spa;
 521         uint64_t mintxg;
 522         uint64_t maxtxg;
 523         uint64_t used;
 524         uint64_t comp;
 525         uint64_t uncomp;
 526 };
 527
 528 /* ARGSUSED */
 529 static int
 530 space_range_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
 531 {
 532         struct space_range_arg *sra = arg;
 533
 534         if (bp->blk_birth > sra->mintxg && bp->blk_birth <= sra->maxtxg) {
 535                 if (dsl_pool_sync_context(spa_get_dsl(sra->spa)))
 536                         sra->used += bp_get_dsize_sync(sra->spa, bp);
 537                 else
 538                         sra->used += bp_get_dsize(sra->spa, bp);
 539                 sra->comp += BP_GET_PSIZE(bp);
 540                 sra->uncomp += BP_GET_UCSIZE(bp);
 541         }
 542         return (0);
 543 }
 544
 545 int
 546 bpobj_space(bpobj_t *bpo, uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
 547 {
 548         mutex_enter(&bpo->bpo_lock);
 549
 550         *usedp = bpo->bpo_phys->bpo_bytes;
 551         if (bpo->bpo_havecomp) {
 552                 *compp = bpo->bpo_phys->bpo_comp;
 553                 *uncompp = bpo->bpo_phys->bpo_uncomp;
 554                 mutex_exit(&bpo->bpo_lock);
 555                 return (0);
 556         } else {
 557                 mutex_exit(&bpo->bpo_lock);
 558                 return (bpobj_space_range(bpo, 0, UINT64_MAX,
 559                     usedp, compp, uncompp));
 560         }
 561 }
 562
 563 /*
 564  * Return the amount of space in the bpobj which is:
 565  * mintxg < blk_birth <= maxtxg
 566  */
 567 int
 568 bpobj_space_range(bpobj_t *bpo, uint64_t mintxg, uint64_t maxtxg,
 569     uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
 570 {
 571         struct space_range_arg sra = { 0 };
 572         int err;
 573
 574         /*
 575          * As an optimization, if they want the whole txg range, just
 576          * get bpo_bytes rather than iterating over the bps.
 577          */
 578         if (mintxg < TXG_INITIAL && maxtxg == UINT64_MAX && bpo->bpo_havecomp)
 579                 return (bpobj_space(bpo, usedp, compp, uncompp));
 580
 581         sra.spa = dmu_objset_spa(bpo->bpo_os);
 582         sra.mintxg = mintxg;
 583         sra.maxtxg = maxtxg;
 584
 585         err = bpobj_iterate_nofree(bpo, space_range_cb, &sra, NULL);
 586         *usedp = sra.used;
 587         *compp = sra.comp;
 588         *uncompp = sra.uncomp;
 589         return (err);
 590 }