sys/dev/mpr/mpi/mpi2_hbd.h

   1 /*-
   2  * Copyright (c) 2012-2015 LSI Corp.
   3  * Copyright (c) 2013-2015 Avago Technologies
   4  * All rights reserved.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions
   8  * are met:
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above copyright
  12  *    notice, this list of conditions and the following disclaimer in the
  13  *    documentation and/or other materials provided with the distribution.
  14  * 3. Neither the name of the author nor the names of any co-contributors
  15  *    may be used to endorse or promote products derived from this software
  16  *    without specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  21  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  28  * SUCH DAMAGE.
  29  *
  30  * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
  31  *
  32  * $FreeBSD$
  33  */
  34
  35 /*
  36  *  Copyright (c) 2009-2015 LSI Corporation.
  37  *  Copyright (c) 2013-2015 Avago Technologies
  38  *
  39  *
  40  *           Name:  mpi2_hbd.h
  41  *          Title:  MPI Host Based Discovery messages and structures
  42  *  Creation Date:  October 21, 2009
  43  *
  44  *  mpi2_hbd.h Version:  02.00.02
  45  *
  46  *  NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
  47  *        prefix are for use only on MPI v2.5 products, and must not be used
  48  *        with MPI v2.0 products. Unless otherwise noted, names beginning with
  49  *        MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
  50  *
  51  *  Version History
  52  *  ---------------
  53  *
  54  *  Date      Version   Description
  55  *  --------  --------  ------------------------------------------------------
  56  *  10-28-09  02.00.00  Initial version.
  57  *  08-11-10  02.00.01  Removed PortGroups, DmaGroup, and ControlGroup from
  58  *                      HBD Action request, replaced by AdditionalInfo field.
  59  *  11-18-11  02.00.02  Incorporating additions for MPI v2.5.
  60  *  --------------------------------------------------------------------------
  61  */
  62
  63 #ifndef MPI2_HBD_H
  64 #define MPI2_HBD_H
  65
  66 /****************************************************************************
  67 *  Host Based Discovery Action messages
  68 ****************************************************************************/
  69
  70 /* Host Based Discovery Action Request Message */
  71 typedef struct _MPI2_HBD_ACTION_REQUEST
  72 {
  73     U8                      Operation;          /* 0x00 */
  74     U8                      Reserved1;          /* 0x01 */
  75     U8                      ChainOffset;        /* 0x02 */
  76     U8                      Function;           /* 0x03 */
  77     U16                     DevHandle;          /* 0x04 */
  78     U8                      Reserved2;          /* 0x06 */
  79     U8                      MsgFlags;           /* 0x07 */
  80     U8                      VP_ID;              /* 0x08 */
  81     U8                      VF_ID;              /* 0x09 */
  82     U16                     Reserved3;          /* 0x0A */
  83     U32                     Reserved4;          /* 0x0C */
  84     U64                     SASAddress;         /* 0x10 */
  85     U32                     Reserved5;          /* 0x18 */
  86     U32                     HbdDeviceInfo;      /* 0x1C */
  87     U16                     ParentDevHandle;    /* 0x20 */
  88     U16                     MaxQDepth;          /* 0x22 */
  89     U8                      FirstPhyIdentifier; /* 0x24 */
  90     U8                      Port;               /* 0x25 */
  91     U8                      MaxConnections;     /* 0x26 */
  92     U8                      MaxRate;            /* 0x27 */
  93     U32                     AdditionalInfo;     /* 0x28 */
  94     U16                     InitialAWT;         /* 0x2C */
  95     U16                     Reserved7;          /* 0x2E */
  96     U32                     Reserved8;          /* 0x30 */
  97 } MPI2_HBD_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_HBD_ACTION_REQUEST,
  98   Mpi2HbdActionRequest_t, MPI2_POINTER pMpi2HbdActionRequest_t;
  99
 100 /* values for the Operation field */
 101 #define MPI2_HBD_OP_ADD_DEVICE                  (0x01)
 102 #define MPI2_HBD_OP_REMOVE_DEVICE               (0x02)
 103 #define MPI2_HBD_OP_UPDATE_DEVICE               (0x03)
 104
 105 /* values for the HbdDeviceInfo field */
 106 #define MPI2_HBD_DEVICE_INFO_VIRTUAL_DEVICE     (0x00004000)
 107 #define MPI2_HBD_DEVICE_INFO_ATAPI_DEVICE       (0x00002000)
 108 #define MPI2_HBD_DEVICE_INFO_DIRECT_ATTACH      (0x00000800)
 109 #define MPI2_HBD_DEVICE_INFO_SSP_TARGET         (0x00000400)
 110 #define MPI2_HBD_DEVICE_INFO_STP_TARGET         (0x00000200)
 111 #define MPI2_HBD_DEVICE_INFO_SMP_TARGET         (0x00000100)
 112 #define MPI2_HBD_DEVICE_INFO_SATA_DEVICE        (0x00000080)
 113 #define MPI2_HBD_DEVICE_INFO_SSP_INITIATOR      (0x00000040)
 114 #define MPI2_HBD_DEVICE_INFO_STP_INITIATOR      (0x00000020)
 115 #define MPI2_HBD_DEVICE_INFO_SMP_INITIATOR      (0x00000010)
 116 #define MPI2_HBD_DEVICE_INFO_SATA_HOST          (0x00000008)
 117
 118 #define MPI2_HBD_DEVICE_INFO_MASK_DEVICE_TYPE   (0x00000007)
 119 #define MPI2_HBD_DEVICE_INFO_NO_DEVICE          (0x00000000)
 120 #define MPI2_HBD_DEVICE_INFO_END_DEVICE         (0x00000001)
 121 #define MPI2_HBD_DEVICE_INFO_EDGE_EXPANDER      (0x00000002)
 122 #define MPI2_HBD_DEVICE_INFO_FANOUT_EXPANDER    (0x00000003)
 123
 124 /* values for the MaxRate field */
 125 #define MPI2_HBD_MAX_RATE_MASK                  (0x0F)
 126 #define MPI2_HBD_MAX_RATE_1_5                   (0x08)
 127 #define MPI2_HBD_MAX_RATE_3_0                   (0x09)
 128 #define MPI2_HBD_MAX_RATE_6_0                   (0x0A)
 129 #define MPI25_HBD_MAX_RATE_12_0                 (0x0B)
 130
 131
 132 /* Host Based Discovery Action Reply Message */
 133 typedef struct _MPI2_HBD_ACTION_REPLY
 134 {
 135     U8                      Operation;          /* 0x00 */
 136     U8                      Reserved1;          /* 0x01 */
 137     U8                      MsgLength;          /* 0x02 */
 138     U8                      Function;           /* 0x03 */
 139     U16                     DevHandle;          /* 0x04 */
 140     U8                      Reserved2;          /* 0x06 */
 141     U8                      MsgFlags;           /* 0x07 */
 142     U8                      VP_ID;              /* 0x08 */
 143     U8                      VF_ID;              /* 0x09 */
 144     U16                     Reserved3;          /* 0x0A */
 145     U16                     Reserved4;          /* 0x0C */
 146     U16                     IOCStatus;          /* 0x0E */
 147     U32                     IOCLogInfo;         /* 0x10 */
 148 } MPI2_HBD_ACTION_REPLY, MPI2_POINTER PTR_MPI2_HBD_ACTION_REPLY,
 149   Mpi2HbdActionReply_t, MPI2_POINTER pMpi2HbdActionReply_t;
 150
 151
 152 #endif
 153
 154