2 * Copyright (c) 2012-2015 LSI Corp.
3 * Copyright (c) 2013-2015 Avago Technologies
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * 3. Neither the name of the author nor the names of any co-contributors
15 * may be used to endorse or promote products derived from this software
16 * without specific prior written permission.
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
30 * Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
36 * Copyright (c) 2000-2015 LSI Corporation.
37 * Copyright (c) 2013-2015 Avago Technologies
41 * Title: MPI Serial Attached SCSI structures and definitions
42 * Creation Date: February 9, 2007
44 * mpi2_sas.h Version: 02.00.08
46 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
47 * prefix are for use only on MPI v2.5 products, and must not be used
48 * with MPI v2.0 products. Unless otherwise noted, names beginning with
49 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
54 * Date Version Description
55 * -------- -------- ------------------------------------------------------
56 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
57 * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
59 * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
61 * 10-28-09 02.00.03 Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
62 * to MPI2_SGE_IO_UNION since it supports chained SGLs.
63 * 05-12-10 02.00.04 Modified some comments.
64 * 08-11-10 02.00.05 Added NCQ operations to SAS IO Unit Control.
65 * 11-18-11 02.00.06 Incorporating additions for MPI v2.5.
66 * 07-10-12 02.00.07 Added MPI2_SATA_PT_SGE_UNION for use in the SATA
67 * Passthrough Request message.
68 * 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
69 * for anything newer than MPI v2.0.
70 * --------------------------------------------------------------------------
77 * Values for SASStatus.
79 #define MPI2_SASSTATUS_SUCCESS (0x00)
80 #define MPI2_SASSTATUS_UNKNOWN_ERROR (0x01)
81 #define MPI2_SASSTATUS_INVALID_FRAME (0x02)
82 #define MPI2_SASSTATUS_UTC_BAD_DEST (0x03)
83 #define MPI2_SASSTATUS_UTC_BREAK_RECEIVED (0x04)
84 #define MPI2_SASSTATUS_UTC_CONNECT_RATE_NOT_SUPPORTED (0x05)
85 #define MPI2_SASSTATUS_UTC_PORT_LAYER_REQUEST (0x06)
86 #define MPI2_SASSTATUS_UTC_PROTOCOL_NOT_SUPPORTED (0x07)
87 #define MPI2_SASSTATUS_UTC_STP_RESOURCES_BUSY (0x08)
88 #define MPI2_SASSTATUS_UTC_WRONG_DESTINATION (0x09)
89 #define MPI2_SASSTATUS_SHORT_INFORMATION_UNIT (0x0A)
90 #define MPI2_SASSTATUS_LONG_INFORMATION_UNIT (0x0B)
91 #define MPI2_SASSTATUS_XFER_RDY_INCORRECT_WRITE_DATA (0x0C)
92 #define MPI2_SASSTATUS_XFER_RDY_REQUEST_OFFSET_ERROR (0x0D)
93 #define MPI2_SASSTATUS_XFER_RDY_NOT_EXPECTED (0x0E)
94 #define MPI2_SASSTATUS_DATA_INCORRECT_DATA_LENGTH (0x0F)
95 #define MPI2_SASSTATUS_DATA_TOO_MUCH_READ_DATA (0x10)
96 #define MPI2_SASSTATUS_DATA_OFFSET_ERROR (0x11)
97 #define MPI2_SASSTATUS_SDSF_NAK_RECEIVED (0x12)
98 #define MPI2_SASSTATUS_SDSF_CONNECTION_FAILED (0x13)
99 #define MPI2_SASSTATUS_INITIATOR_RESPONSE_TIMEOUT (0x14)
103 * Values for the SAS DeviceInfo field used in SAS Device Status Change Event
104 * data and SAS Configuration pages.
106 #define MPI2_SAS_DEVICE_INFO_SEP (0x00004000)
107 #define MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE (0x00002000)
108 #define MPI2_SAS_DEVICE_INFO_LSI_DEVICE (0x00001000)
109 #define MPI2_SAS_DEVICE_INFO_DIRECT_ATTACH (0x00000800)
110 #define MPI2_SAS_DEVICE_INFO_SSP_TARGET (0x00000400)
111 #define MPI2_SAS_DEVICE_INFO_STP_TARGET (0x00000200)
112 #define MPI2_SAS_DEVICE_INFO_SMP_TARGET (0x00000100)
113 #define MPI2_SAS_DEVICE_INFO_SATA_DEVICE (0x00000080)
114 #define MPI2_SAS_DEVICE_INFO_SSP_INITIATOR (0x00000040)
115 #define MPI2_SAS_DEVICE_INFO_STP_INITIATOR (0x00000020)
116 #define MPI2_SAS_DEVICE_INFO_SMP_INITIATOR (0x00000010)
117 #define MPI2_SAS_DEVICE_INFO_SATA_HOST (0x00000008)
119 #define MPI2_SAS_DEVICE_INFO_MASK_DEVICE_TYPE (0x00000007)
120 #define MPI2_SAS_DEVICE_INFO_NO_DEVICE (0x00000000)
121 #define MPI2_SAS_DEVICE_INFO_END_DEVICE (0x00000001)
122 #define MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER (0x00000002)
123 #define MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER (0x00000003)
126 /*****************************************************************************
130 *****************************************************************************/
132 /****************************************************************************
133 * SMP Passthrough messages
134 ****************************************************************************/
136 /* SMP Passthrough Request Message */
137 typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
139 U8 PassthroughFlags; /* 0x00 */
140 U8 PhysicalPort; /* 0x01 */
141 U8 ChainOffset; /* 0x02 */
142 U8 Function; /* 0x03 */
143 U16 RequestDataLength; /* 0x04 */
144 U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
145 U8 MsgFlags; /* 0x07 */
148 U16 Reserved1; /* 0x0A */
149 U32 Reserved2; /* 0x0C */
150 U64 SASAddress; /* 0x10 */
151 U32 Reserved3; /* 0x18 */
152 U32 Reserved4; /* 0x1C */
153 MPI2_SIMPLE_SGE_UNION SGL; /* 0x20 */ /* MPI v2.5: IEEE Simple 64 elements only */
154 } MPI2_SMP_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REQUEST,
155 Mpi2SmpPassthroughRequest_t, MPI2_POINTER pMpi2SmpPassthroughRequest_t;
157 /* values for PassthroughFlags field */
158 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE (0x80)
160 /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
163 /* SMP Passthrough Reply Message */
164 typedef struct _MPI2_SMP_PASSTHROUGH_REPLY
166 U8 PassthroughFlags; /* 0x00 */
167 U8 PhysicalPort; /* 0x01 */
168 U8 MsgLength; /* 0x02 */
169 U8 Function; /* 0x03 */
170 U16 ResponseDataLength; /* 0x04 */
171 U8 SGLFlags; /* 0x06 */
172 U8 MsgFlags; /* 0x07 */
175 U16 Reserved1; /* 0x0A */
176 U8 Reserved2; /* 0x0C */
177 U8 SASStatus; /* 0x0D */
178 U16 IOCStatus; /* 0x0E */
179 U32 IOCLogInfo; /* 0x10 */
180 U32 Reserved3; /* 0x14 */
181 U8 ResponseData[4]; /* 0x18 */
182 } MPI2_SMP_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SMP_PASSTHROUGH_REPLY,
183 Mpi2SmpPassthroughReply_t, MPI2_POINTER pMpi2SmpPassthroughReply_t;
185 /* values for PassthroughFlags field */
186 #define MPI2_SMP_PT_REPLY_PT_FLAGS_IMMEDIATE (0x80)
188 /* values for SASStatus field are at the top of this file */
191 /****************************************************************************
192 * SATA Passthrough messages
193 ****************************************************************************/
195 typedef union _MPI2_SATA_PT_SGE_UNION
197 MPI2_SGE_SIMPLE_UNION MpiSimple; /* MPI v2.0 only */
198 MPI2_SGE_CHAIN_UNION MpiChain; /* MPI v2.0 only */
199 MPI2_IEEE_SGE_SIMPLE_UNION IeeeSimple;
200 MPI2_IEEE_SGE_CHAIN_UNION IeeeChain; /* MPI v2.0 only */
201 MPI25_IEEE_SGE_CHAIN64 IeeeChain64; /* MPI v2.5 only */
202 } MPI2_SATA_PT_SGE_UNION, MPI2_POINTER PTR_MPI2_SATA_PT_SGE_UNION,
203 Mpi2SataPTSGEUnion_t, MPI2_POINTER pMpi2SataPTSGEUnion_t;
206 /* SATA Passthrough Request Message */
207 typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
209 U16 DevHandle; /* 0x00 */
210 U8 ChainOffset; /* 0x02 */
211 U8 Function; /* 0x03 */
212 U16 PassthroughFlags; /* 0x04 */
213 U8 SGLFlags; /* 0x06 */ /* MPI v2.0 only. Reserved on MPI v2.5. */
214 U8 MsgFlags; /* 0x07 */
217 U16 Reserved1; /* 0x0A */
218 U32 Reserved2; /* 0x0C */
219 U32 Reserved3; /* 0x10 */
220 U32 Reserved4; /* 0x14 */
221 U32 DataLength; /* 0x18 */
222 U8 CommandFIS[20]; /* 0x1C */
223 MPI2_SATA_PT_SGE_UNION SGL; /* 0x30 */ /* MPI v2.5: IEEE 64 elements only */
224 } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
225 Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
227 /* values for PassthroughFlags field */
228 #define MPI2_SATA_PT_REQ_PT_FLAGS_EXECUTE_DIAG (0x0100)
229 #define MPI2_SATA_PT_REQ_PT_FLAGS_DMA (0x0020)
230 #define MPI2_SATA_PT_REQ_PT_FLAGS_PIO (0x0010)
231 #define MPI2_SATA_PT_REQ_PT_FLAGS_UNSPECIFIED_VU (0x0004)
232 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE (0x0002)
233 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ (0x0001)
235 /* MPI v2.0: use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
238 /* SATA Passthrough Reply Message */
239 typedef struct _MPI2_SATA_PASSTHROUGH_REPLY
241 U16 DevHandle; /* 0x00 */
242 U8 MsgLength; /* 0x02 */
243 U8 Function; /* 0x03 */
244 U16 PassthroughFlags; /* 0x04 */
245 U8 SGLFlags; /* 0x06 */
246 U8 MsgFlags; /* 0x07 */
249 U16 Reserved1; /* 0x0A */
250 U8 Reserved2; /* 0x0C */
251 U8 SASStatus; /* 0x0D */
252 U16 IOCStatus; /* 0x0E */
253 U32 IOCLogInfo; /* 0x10 */
254 U8 StatusFIS[20]; /* 0x14 */
255 U32 StatusControlRegisters; /* 0x28 */
256 U32 TransferCount; /* 0x2C */
257 } MPI2_SATA_PASSTHROUGH_REPLY, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REPLY,
258 Mpi2SataPassthroughReply_t, MPI2_POINTER pMpi2SataPassthroughReply_t;
260 /* values for SASStatus field are at the top of this file */
263 /****************************************************************************
264 * SAS IO Unit Control messages
265 ****************************************************************************/
267 /* SAS IO Unit Control Request Message */
268 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
270 U8 Operation; /* 0x00 */
271 U8 Reserved1; /* 0x01 */
272 U8 ChainOffset; /* 0x02 */
273 U8 Function; /* 0x03 */
274 U16 DevHandle; /* 0x04 */
275 U8 IOCParameter; /* 0x06 */
276 U8 MsgFlags; /* 0x07 */
279 U16 Reserved3; /* 0x0A */
280 U16 Reserved4; /* 0x0C */
281 U8 PhyNum; /* 0x0E */
282 U8 PrimFlags; /* 0x0F */
283 U32 Primitive; /* 0x10 */
284 U8 LookupMethod; /* 0x14 */
285 U8 Reserved5; /* 0x15 */
286 U16 SlotNumber; /* 0x16 */
287 U64 LookupAddress; /* 0x18 */
288 U32 IOCParameterValue; /* 0x20 */
289 U32 Reserved7; /* 0x24 */
290 U32 Reserved8; /* 0x28 */
291 } MPI2_SAS_IOUNIT_CONTROL_REQUEST,
292 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REQUEST,
293 Mpi2SasIoUnitControlRequest_t, MPI2_POINTER pMpi2SasIoUnitControlRequest_t;
295 /* values for the Operation field */
296 #define MPI2_SAS_OP_CLEAR_ALL_PERSISTENT (0x02)
297 #define MPI2_SAS_OP_PHY_LINK_RESET (0x06)
298 #define MPI2_SAS_OP_PHY_HARD_RESET (0x07)
299 #define MPI2_SAS_OP_PHY_CLEAR_ERROR_LOG (0x08)
300 #define MPI2_SAS_OP_SEND_PRIMITIVE (0x0A)
301 #define MPI2_SAS_OP_FORCE_FULL_DISCOVERY (0x0B)
302 #define MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL (0x0C) /* MPI v2.0 only */
303 #define MPI2_SAS_OP_REMOVE_DEVICE (0x0D)
304 #define MPI2_SAS_OP_LOOKUP_MAPPING (0x0E)
305 #define MPI2_SAS_OP_SET_IOC_PARAMETER (0x0F)
306 #define MPI25_SAS_OP_ENABLE_FP_DEVICE (0x10)
307 #define MPI25_SAS_OP_DISABLE_FP_DEVICE (0x11)
308 #define MPI25_SAS_OP_ENABLE_FP_ALL (0x12)
309 #define MPI25_SAS_OP_DISABLE_FP_ALL (0x13)
310 #define MPI2_SAS_OP_DEV_ENABLE_NCQ (0x14)
311 #define MPI2_SAS_OP_DEV_DISABLE_NCQ (0x15)
312 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN (0x80)
314 /* values for the PrimFlags field */
315 #define MPI2_SAS_PRIMFLAGS_SINGLE (0x08)
316 #define MPI2_SAS_PRIMFLAGS_TRIPLE (0x02)
317 #define MPI2_SAS_PRIMFLAGS_REDUNDANT (0x01)
319 /* values for the LookupMethod field */
320 #define MPI2_SAS_LOOKUP_METHOD_SAS_ADDRESS (0x01)
321 #define MPI2_SAS_LOOKUP_METHOD_SAS_ENCLOSURE_SLOT (0x02)
322 #define MPI2_SAS_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
325 /* SAS IO Unit Control Reply Message */
326 typedef struct _MPI2_SAS_IOUNIT_CONTROL_REPLY
328 U8 Operation; /* 0x00 */
329 U8 Reserved1; /* 0x01 */
330 U8 MsgLength; /* 0x02 */
331 U8 Function; /* 0x03 */
332 U16 DevHandle; /* 0x04 */
333 U8 IOCParameter; /* 0x06 */
334 U8 MsgFlags; /* 0x07 */
337 U16 Reserved3; /* 0x0A */
338 U16 Reserved4; /* 0x0C */
339 U16 IOCStatus; /* 0x0E */
340 U32 IOCLogInfo; /* 0x10 */
341 } MPI2_SAS_IOUNIT_CONTROL_REPLY,
342 MPI2_POINTER PTR_MPI2_SAS_IOUNIT_CONTROL_REPLY,
343 Mpi2SasIoUnitControlReply_t, MPI2_POINTER pMpi2SasIoUnitControlReply_t;