sys/dev/usb/serial/uslcom.c

   1 /*      $OpenBSD: uslcom.c,v 1.17 2007/11/24 10:52:12 jsg Exp $ */
   2
   3 #include <sys/cdefs.h>
   4 __FBSDID("$FreeBSD$");
   5
   6 /*
   7  * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org>
   8  *
   9  * Permission to use, copy, modify, and distribute this software for any
  10  * purpose with or without fee is hereby granted, provided that the above
  11  * copyright notice and this permission notice appear in all copies.
  12  *
  13  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  14  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  15  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  16  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  17  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  18  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  19  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  20  */
  21
  22 /*
  23  * Driver for Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105
  24  * USB-Serial adapters.  Based on datasheet AN571, publicly available from
  25  * http://www.silabs.com/Support%20Documents/TechnicalDocs/AN571.pdf
  26  */
  27
  28 #include <sys/stdint.h>
  29 #include <sys/stddef.h>
  30 #include <sys/param.h>
  31 #include <sys/queue.h>
  32 #include <sys/types.h>
  33 #include <sys/systm.h>
  34 #include <sys/kernel.h>
  35 #include <sys/bus.h>
  36 #include <sys/module.h>
  37 #include <sys/lock.h>
  38 #include <sys/mutex.h>
  39 #include <sys/condvar.h>
  40 #include <sys/sysctl.h>
  41 #include <sys/sx.h>
  42 #include <sys/unistd.h>
  43 #include <sys/callout.h>
  44 #include <sys/malloc.h>
  45 #include <sys/priv.h>
  46
  47 #include <dev/usb/usb.h>
  48 #include <dev/usb/usbdi.h>
  49 #include <dev/usb/usbdi_util.h>
  50 #include <dev/usb/usb_ioctl.h>
  51 #include "usbdevs.h"
  52
  53 #define USB_DEBUG_VAR uslcom_debug
  54 #include <dev/usb/usb_debug.h>
  55 #include <dev/usb/usb_process.h>
  56
  57 #include <dev/usb/serial/usb_serial.h>
  58
  59 #ifdef USB_DEBUG
  60 static int uslcom_debug = 0;
  61
  62 static SYSCTL_NODE(_hw_usb, OID_AUTO, uslcom, CTLFLAG_RW, 0, "USB uslcom");
  63 SYSCTL_INT(_hw_usb_uslcom, OID_AUTO, debug, CTLFLAG_RW,
  64     &uslcom_debug, 0, "Debug level");
  65 #endif
  66
  67 #define USLCOM_BULK_BUF_SIZE            1024
  68 #define USLCOM_CONFIG_INDEX     0
  69
  70 /* Request types */
  71 #define USLCOM_WRITE            0x41
  72 #define USLCOM_READ             0xc1
  73
  74 /* Request codes */
  75 #define USLCOM_IFC_ENABLE       0x00
  76 #define USLCOM_SET_BAUDDIV      0x01
  77 #define USLCOM_SET_LINE_CTL     0x03
  78 #define USLCOM_SET_BREAK        0x05
  79 #define USLCOM_SET_MHS          0x07
  80 #define USLCOM_GET_MDMSTS       0x08
  81 #define USLCOM_SET_FLOW         0x13
  82 #define USLCOM_SET_BAUDRATE     0x1e
  83 #define USLCOM_VENDOR_SPECIFIC  0xff
  84
  85 /* USLCOM_IFC_ENABLE values */
  86 #define USLCOM_IFC_ENABLE_DIS   0x00
  87 #define USLCOM_IFC_ENABLE_EN    0x01
  88
  89 /* USLCOM_SET_MHS/USLCOM_GET_MDMSTS values */
  90 #define USLCOM_MHS_DTR_ON       0x0001
  91 #define USLCOM_MHS_DTR_SET      0x0100
  92 #define USLCOM_MHS_RTS_ON       0x0002
  93 #define USLCOM_MHS_RTS_SET      0x0200
  94 #define USLCOM_MHS_CTS          0x0010
  95 #define USLCOM_MHS_DSR          0x0020
  96 #define USLCOM_MHS_RI           0x0040
  97 #define USLCOM_MHS_DCD          0x0080
  98
  99 /* USLCOM_SET_BAUDDIV values */
 100 #define USLCOM_BAUDDIV_REF      3686400 /* 3.6864 MHz */
 101
 102 /* USLCOM_SET_LINE_CTL values */
 103 #define USLCOM_STOP_BITS_1      0x00
 104 #define USLCOM_STOP_BITS_2      0x02
 105 #define USLCOM_PARITY_NONE      0x00
 106 #define USLCOM_PARITY_ODD       0x10
 107 #define USLCOM_PARITY_EVEN      0x20
 108 #define USLCOM_SET_DATA_BITS(x) ((x) << 8)
 109
 110 /* USLCOM_SET_BREAK values */
 111 #define USLCOM_SET_BREAK_OFF    0x00
 112 #define USLCOM_SET_BREAK_ON     0x01
 113
 114 /* USLCOM_SET_FLOW values - 1st word */
 115 #define USLCOM_FLOW_DTR_ON      0x00000001 /* DTR static active */
 116 #define USLCOM_FLOW_CTS_HS      0x00000008 /* CTS handshake */
 117 /* USLCOM_SET_FLOW values - 2nd word */
 118 #define USLCOM_FLOW_RTS_ON      0x00000040 /* RTS static active */
 119 #define USLCOM_FLOW_RTS_HS      0x00000080 /* RTS handshake */
 120
 121 /* USLCOM_VENDOR_SPECIFIC values */
 122 #define USLCOM_GET_PARTNUM      0x370B
 123 #define USLCOM_WRITE_LATCH      0x37E1
 124 #define USLCOM_READ_LATCH       0x00C2
 125
 126 /* USLCOM_GET_PARTNUM values from hardware */
 127 #define USLCOM_PARTNUM_CP2101   1
 128 #define USLCOM_PARTNUM_CP2102   2
 129 #define USLCOM_PARTNUM_CP2103   3
 130 #define USLCOM_PARTNUM_CP2104   4
 131 #define USLCOM_PARTNUM_CP2105   5
 132
 133 enum {
 134         USLCOM_BULK_DT_WR,
 135         USLCOM_BULK_DT_RD,
 136         USLCOM_CTRL_DT_RD,
 137         USLCOM_N_TRANSFER,
 138 };
 139
 140 struct uslcom_softc {
 141         struct ucom_super_softc sc_super_ucom;
 142         struct ucom_softc sc_ucom;
 143         struct usb_callout sc_watchdog;
 144
 145         struct usb_xfer *sc_xfer[USLCOM_N_TRANSFER];
 146         struct usb_device *sc_udev;
 147         struct mtx sc_mtx;
 148
 149         uint8_t          sc_msr;
 150         uint8_t          sc_lsr;
 151         uint8_t          sc_iface_no;
 152         uint8_t          sc_partnum;
 153 };
 154
 155 static device_probe_t uslcom_probe;
 156 static device_attach_t uslcom_attach;
 157 static device_detach_t uslcom_detach;
 158 static void uslcom_free_softc(struct uslcom_softc *);
 159
 160 static usb_callback_t uslcom_write_callback;
 161 static usb_callback_t uslcom_read_callback;
 162 static usb_callback_t uslcom_control_callback;
 163
 164 static void     uslcom_free(struct ucom_softc *);
 165 static void uslcom_open(struct ucom_softc *);
 166 static void uslcom_close(struct ucom_softc *);
 167 static uint8_t uslcom_get_partnum(struct uslcom_softc *);
 168 static void uslcom_set_dtr(struct ucom_softc *, uint8_t);
 169 static void uslcom_set_rts(struct ucom_softc *, uint8_t);
 170 static void uslcom_set_break(struct ucom_softc *, uint8_t);
 171 static int uslcom_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
 172                 struct thread *);
 173 static int uslcom_pre_param(struct ucom_softc *, struct termios *);
 174 static void uslcom_param(struct ucom_softc *, struct termios *);
 175 static void uslcom_get_status(struct ucom_softc *, uint8_t *, uint8_t *);
 176 static void uslcom_start_read(struct ucom_softc *);
 177 static void uslcom_stop_read(struct ucom_softc *);
 178 static void uslcom_start_write(struct ucom_softc *);
 179 static void uslcom_stop_write(struct ucom_softc *);
 180 static void uslcom_poll(struct ucom_softc *ucom);
 181
 182 static const struct usb_config uslcom_config[USLCOM_N_TRANSFER] = {
 183
 184         [USLCOM_BULK_DT_WR] = {
 185                 .type = UE_BULK,
 186                 .endpoint = UE_ADDR_ANY,
 187                 .direction = UE_DIR_OUT,
 188                 .bufsize = USLCOM_BULK_BUF_SIZE,
 189                .flags = {.pipe_bof = 1,},
 190                 .callback = &uslcom_write_callback,
 191         },
 192
 193         [USLCOM_BULK_DT_RD] = {
 194                 .type = UE_BULK,
 195                 .endpoint = UE_ADDR_ANY,
 196                 .direction = UE_DIR_IN,
 197                 .bufsize = USLCOM_BULK_BUF_SIZE,
 198                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 199                 .callback = &uslcom_read_callback,
 200         },
 201         [USLCOM_CTRL_DT_RD] = {
 202                 .type = UE_CONTROL,
 203                 .endpoint = 0x00,
 204                 .direction = UE_DIR_ANY,
 205                 .bufsize = sizeof(struct usb_device_request) + 8,
 206                 .flags = {.pipe_bof = 1,},
 207                 .callback = &uslcom_control_callback,
 208                 .timeout = 1000,        /* 1 second timeout */
 209         },
 210 };
 211
 212 static struct ucom_callback uslcom_callback = {
 213         .ucom_cfg_open = &uslcom_open,
 214         .ucom_cfg_close = &uslcom_close,
 215         .ucom_cfg_get_status = &uslcom_get_status,
 216         .ucom_cfg_set_dtr = &uslcom_set_dtr,
 217         .ucom_cfg_set_rts = &uslcom_set_rts,
 218         .ucom_cfg_set_break = &uslcom_set_break,
 219         .ucom_ioctl = &uslcom_ioctl,
 220         .ucom_cfg_param = &uslcom_param,
 221         .ucom_pre_param = &uslcom_pre_param,
 222         .ucom_start_read = &uslcom_start_read,
 223         .ucom_stop_read = &uslcom_stop_read,
 224         .ucom_start_write = &uslcom_start_write,
 225         .ucom_stop_write = &uslcom_stop_write,
 226         .ucom_poll = &uslcom_poll,
 227         .ucom_free = &uslcom_free,
 228 };
 229
 230 static const STRUCT_USB_HOST_ID uslcom_devs[] = {
 231 #define USLCOM_DEV(v,p)  { USB_VP(USB_VENDOR_##v, USB_PRODUCT_##v##_##p) }
 232     USLCOM_DEV(BALTECH, CARDREADER),
 233     USLCOM_DEV(CLIPSAL, 5000CT2),
 234     USLCOM_DEV(CLIPSAL, 5500PACA),
 235     USLCOM_DEV(CLIPSAL, 5500PCU),
 236     USLCOM_DEV(CLIPSAL, 560884),
 237     USLCOM_DEV(CLIPSAL, 5800PC),
 238     USLCOM_DEV(CLIPSAL, C5000CT2),
 239     USLCOM_DEV(CLIPSAL, L51xx),
 240     USLCOM_DEV(DATAAPEX, MULTICOM),
 241     USLCOM_DEV(DELL, DW700),
 242     USLCOM_DEV(DIGIANSWER, ZIGBEE802154),
 243     USLCOM_DEV(DYNASTREAM, ANTDEVBOARD),
 244     USLCOM_DEV(DYNASTREAM, ANTDEVBOARD2),
 245     USLCOM_DEV(DYNASTREAM, ANT2USB),
 246     USLCOM_DEV(ELV, USBI2C),
 247     USLCOM_DEV(FESTO, CMSP),
 248     USLCOM_DEV(FESTO, CPX_USB),
 249     USLCOM_DEV(FOXCONN, PIRELLI_DP_L10),
 250     USLCOM_DEV(FOXCONN, TCOM_TC_300),
 251     USLCOM_DEV(GEMALTO, PROXPU),
 252     USLCOM_DEV(JABLOTRON, PC60B),
 253     USLCOM_DEV(KAMSTRUP, OPTICALEYE),
 254     USLCOM_DEV(KAMSTRUP, MBUS_250D),
 255     USLCOM_DEV(LAKESHORE, 121),
 256     USLCOM_DEV(LAKESHORE, 218A),
 257     USLCOM_DEV(LAKESHORE, 219),
 258     USLCOM_DEV(LAKESHORE, 233),
 259     USLCOM_DEV(LAKESHORE, 235),
 260     USLCOM_DEV(LAKESHORE, 335),
 261     USLCOM_DEV(LAKESHORE, 336),
 262     USLCOM_DEV(LAKESHORE, 350),
 263     USLCOM_DEV(LAKESHORE, 371),
 264     USLCOM_DEV(LAKESHORE, 411),
 265     USLCOM_DEV(LAKESHORE, 425),
 266     USLCOM_DEV(LAKESHORE, 455A),
 267     USLCOM_DEV(LAKESHORE, 465),
 268     USLCOM_DEV(LAKESHORE, 475A),
 269     USLCOM_DEV(LAKESHORE, 625A),
 270     USLCOM_DEV(LAKESHORE, 642A),
 271     USLCOM_DEV(LAKESHORE, 648),
 272     USLCOM_DEV(LAKESHORE, 737),
 273     USLCOM_DEV(LAKESHORE, 776),
 274     USLCOM_DEV(LINKINSTRUMENTS, MSO19),
 275     USLCOM_DEV(LINKINSTRUMENTS, MSO28),
 276     USLCOM_DEV(LINKINSTRUMENTS, MSO28_2),
 277     USLCOM_DEV(MEI, CASHFLOW_SC),
 278     USLCOM_DEV(MEI, S2000),
 279     USLCOM_DEV(NETGEAR, M4100),
 280     USLCOM_DEV(OWEN, AC4),
 281     USLCOM_DEV(OWL, CM_160),
 282     USLCOM_DEV(PHILIPS, ACE1001),
 283     USLCOM_DEV(PLX, CA42),
 284     USLCOM_DEV(RENESAS, RX610),
 285     USLCOM_DEV(SEL, C662),
 286     USLCOM_DEV(SILABS, AC_SERV_CAN),
 287     USLCOM_DEV(SILABS, AC_SERV_CIS),
 288     USLCOM_DEV(SILABS, AC_SERV_IBUS),
 289     USLCOM_DEV(SILABS, AC_SERV_OBD),
 290     USLCOM_DEV(SILABS, AEROCOMM),
 291     USLCOM_DEV(SILABS, AMBER_AMB2560),
 292     USLCOM_DEV(SILABS, ARGUSISP),
 293     USLCOM_DEV(SILABS, ARKHAM_DS101_A),
 294     USLCOM_DEV(SILABS, ARKHAM_DS101_M),
 295     USLCOM_DEV(SILABS, ARYGON_MIFARE),
 296     USLCOM_DEV(SILABS, AVIT_USB_TTL),
 297     USLCOM_DEV(SILABS, B_G_H3000),
 298     USLCOM_DEV(SILABS, BALLUFF_RFID),
 299     USLCOM_DEV(SILABS, BEI_VCP),
 300     USLCOM_DEV(SILABS, BSM7DUSB),
 301     USLCOM_DEV(SILABS, BURNSIDE),
 302     USLCOM_DEV(SILABS, C2_EDGE_MODEM),
 303     USLCOM_DEV(SILABS, CP2102),
 304     USLCOM_DEV(SILABS, CP210X_2),
 305     USLCOM_DEV(SILABS, CP210X_3),
 306     USLCOM_DEV(SILABS, CP210X_4),
 307     USLCOM_DEV(SILABS, CRUMB128),
 308     USLCOM_DEV(SILABS, CYGNAL),
 309     USLCOM_DEV(SILABS, CYGNAL_DEBUG),
 310     USLCOM_DEV(SILABS, CYGNAL_GPS),
 311     USLCOM_DEV(SILABS, DEGREE),
 312     USLCOM_DEV(SILABS, DEKTEK_DTAPLUS),
 313     USLCOM_DEV(SILABS, EMS_C1007),
 314     USLCOM_DEV(SILABS, HAMLINKUSB),
 315     USLCOM_DEV(SILABS, HELICOM),
 316     USLCOM_DEV(SILABS, IMS_USB_RS422),
 317     USLCOM_DEV(SILABS, INFINITY_MIC),
 318     USLCOM_DEV(SILABS, INGENI_ZIGBEE),
 319     USLCOM_DEV(SILABS, INSYS_MODEM),
 320     USLCOM_DEV(SILABS, IRZ_SG10),
 321     USLCOM_DEV(SILABS, KYOCERA_GPS),
 322     USLCOM_DEV(SILABS, LIPOWSKY_HARP),
 323     USLCOM_DEV(SILABS, LIPOWSKY_JTAG),
 324     USLCOM_DEV(SILABS, LIPOWSKY_LIN),
 325     USLCOM_DEV(SILABS, MC35PU),
 326     USLCOM_DEV(SILABS, MMB_ZIGBEE),
 327     USLCOM_DEV(SILABS, MJS_TOSLINK),
 328     USLCOM_DEV(SILABS, MSD_DASHHAWK),
 329     USLCOM_DEV(SILABS, MULTIPLEX_RC),
 330     USLCOM_DEV(SILABS, OPTRIS_MSPRO),
 331     USLCOM_DEV(SILABS, POLOLU),
 332     USLCOM_DEV(SILABS, PROCYON_AVS),
 333     USLCOM_DEV(SILABS, SB_PARAMOUNT_ME),
 334     USLCOM_DEV(SILABS, SUUNTO),
 335     USLCOM_DEV(SILABS, TAMSMASTER),
 336     USLCOM_DEV(SILABS, TELEGESIS_ETRX2),
 337     USLCOM_DEV(SILABS, TRACIENT),
 338     USLCOM_DEV(SILABS, TRAQMATE),
 339     USLCOM_DEV(SILABS, USBCOUNT50),
 340     USLCOM_DEV(SILABS, USBPULSE100),
 341     USLCOM_DEV(SILABS, USBSCOPE50),
 342     USLCOM_DEV(SILABS, USBWAVE12),
 343     USLCOM_DEV(SILABS, V_PREON32),
 344     USLCOM_DEV(SILABS, VSTABI),
 345     USLCOM_DEV(SILABS, WAVIT),
 346     USLCOM_DEV(SILABS, WMRBATT),
 347     USLCOM_DEV(SILABS, WMRRIGBLASTER),
 348     USLCOM_DEV(SILABS, WMRRIGTALK),
 349     USLCOM_DEV(SILABS, ZEPHYR_BIO),
 350     USLCOM_DEV(SILABS2, DCU11CLONE),
 351     USLCOM_DEV(SILABS3, GPRS_MODEM),
 352     USLCOM_DEV(SILABS4, 100EU_MODEM),
 353     USLCOM_DEV(SYNTECH, CYPHERLAB100),
 354     USLCOM_DEV(USI, MC60),
 355     USLCOM_DEV(VAISALA, CABLE),
 356     USLCOM_DEV(WAGO, SERVICECABLE),
 357     USLCOM_DEV(WAVESENSE, JAZZ),
 358     USLCOM_DEV(WESTMOUNTAIN, RIGBLASTER_ADVANTAGE),
 359     USLCOM_DEV(WIENERPLEINBAUS, PL512),
 360     USLCOM_DEV(WIENERPLEINBAUS, RCM),
 361     USLCOM_DEV(WIENERPLEINBAUS, MPOD),
 362     USLCOM_DEV(WIENERPLEINBAUS, CML),
 363 #undef USLCOM_DEV
 364 };
 365
 366 static device_method_t uslcom_methods[] = {
 367         DEVMETHOD(device_probe, uslcom_probe),
 368         DEVMETHOD(device_attach, uslcom_attach),
 369         DEVMETHOD(device_detach, uslcom_detach),
 370         DEVMETHOD_END
 371 };
 372
 373 static devclass_t uslcom_devclass;
 374
 375 static driver_t uslcom_driver = {
 376         .name = "uslcom",
 377         .methods = uslcom_methods,
 378         .size = sizeof(struct uslcom_softc),
 379 };
 380
 381 DRIVER_MODULE(uslcom, uhub, uslcom_driver, uslcom_devclass, NULL, 0);
 382 MODULE_DEPEND(uslcom, ucom, 1, 1, 1);
 383 MODULE_DEPEND(uslcom, usb, 1, 1, 1);
 384 MODULE_VERSION(uslcom, 1);
 385
 386 static void
 387 uslcom_watchdog(void *arg)
 388 {
 389         struct uslcom_softc *sc = arg;
 390
 391         mtx_assert(&sc->sc_mtx, MA_OWNED);
 392
 393         usbd_transfer_start(sc->sc_xfer[USLCOM_CTRL_DT_RD]);
 394
 395         usb_callout_reset(&sc->sc_watchdog,
 396             hz / 4, &uslcom_watchdog, sc);
 397 }
 398
 399 static int
 400 uslcom_probe(device_t dev)
 401 {
 402         struct usb_attach_arg *uaa = device_get_ivars(dev);
 403
 404         DPRINTFN(11, "\n");
 405
 406         if (uaa->usb_mode != USB_MODE_HOST) {
 407                 return (ENXIO);
 408         }
 409         if (uaa->info.bConfigIndex != USLCOM_CONFIG_INDEX) {
 410                 return (ENXIO);
 411         }
 412         return (usbd_lookup_id_by_uaa(uslcom_devs, sizeof(uslcom_devs), uaa));
 413 }
 414
 415 static int
 416 uslcom_attach(device_t dev)
 417 {
 418         struct usb_attach_arg *uaa = device_get_ivars(dev);
 419         struct uslcom_softc *sc = device_get_softc(dev);
 420         int error;
 421
 422         DPRINTFN(11, "\n");
 423
 424         device_set_usb_desc(dev);
 425         mtx_init(&sc->sc_mtx, "uslcom", NULL, MTX_DEF);
 426         ucom_ref(&sc->sc_super_ucom);
 427         usb_callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0);
 428
 429         sc->sc_udev = uaa->device;
 430         /* use the interface number from the USB interface descriptor */
 431         sc->sc_iface_no = uaa->info.bIfaceNum;
 432
 433         error = usbd_transfer_setup(uaa->device,
 434             &uaa->info.bIfaceIndex, sc->sc_xfer, uslcom_config,
 435             USLCOM_N_TRANSFER, sc, &sc->sc_mtx);
 436         if (error) {
 437                 DPRINTF("one or more missing USB endpoints, "
 438                     "error=%s\n", usbd_errstr(error));
 439                 goto detach;
 440         }
 441         /* clear stall at first run */
 442         mtx_lock(&sc->sc_mtx);
 443         usbd_xfer_set_stall(sc->sc_xfer[USLCOM_BULK_DT_WR]);
 444         usbd_xfer_set_stall(sc->sc_xfer[USLCOM_BULK_DT_RD]);
 445         mtx_unlock(&sc->sc_mtx);
 446
 447         sc->sc_partnum = uslcom_get_partnum(sc);
 448
 449         error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
 450             &uslcom_callback, &sc->sc_mtx);
 451         if (error) {
 452                 goto detach;
 453         }
 454         ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
 455
 456         return (0);
 457
 458 detach:
 459         uslcom_detach(dev);
 460         return (ENXIO);
 461 }
 462
 463 static int
 464 uslcom_detach(device_t dev)
 465 {
 466         struct uslcom_softc *sc = device_get_softc(dev);
 467
 468         DPRINTF("sc=%p\n", sc);
 469
 470         ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
 471         usbd_transfer_unsetup(sc->sc_xfer, USLCOM_N_TRANSFER);
 472
 473         usb_callout_drain(&sc->sc_watchdog);
 474
 475         device_claim_softc(dev);
 476
 477         uslcom_free_softc(sc);
 478
 479         return (0);
 480 }
 481
 482 UCOM_UNLOAD_DRAIN(uslcom);
 483
 484 static void
 485 uslcom_free_softc(struct uslcom_softc *sc)
 486 {
 487         if (ucom_unref(&sc->sc_super_ucom)) {
 488                 mtx_destroy(&sc->sc_mtx);
 489                 device_free_softc(sc);
 490         }
 491 }
 492
 493 static void
 494 uslcom_free(struct ucom_softc *ucom)
 495 {
 496         uslcom_free_softc(ucom->sc_parent);
 497 }
 498
 499 static void
 500 uslcom_open(struct ucom_softc *ucom)
 501 {
 502         struct uslcom_softc *sc = ucom->sc_parent;
 503         struct usb_device_request req;
 504
 505         req.bmRequestType = USLCOM_WRITE;
 506         req.bRequest = USLCOM_IFC_ENABLE;
 507         USETW(req.wValue, USLCOM_IFC_ENABLE_EN);
 508         USETW(req.wIndex, sc->sc_iface_no);
 509         USETW(req.wLength, 0);
 510
 511         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 512             &req, NULL, 0, 1000)) {
 513                 DPRINTF("UART enable failed (ignored)\n");
 514         }
 515
 516         /* start polling status */
 517         uslcom_watchdog(sc);
 518 }
 519
 520 static void
 521 uslcom_close(struct ucom_softc *ucom)
 522 {
 523         struct uslcom_softc *sc = ucom->sc_parent;
 524         struct usb_device_request req;
 525
 526         /* stop polling status */
 527         usb_callout_stop(&sc->sc_watchdog);
 528
 529         req.bmRequestType = USLCOM_WRITE;
 530         req.bRequest = USLCOM_IFC_ENABLE;
 531         USETW(req.wValue, USLCOM_IFC_ENABLE_DIS);
 532         USETW(req.wIndex, sc->sc_iface_no);
 533         USETW(req.wLength, 0);
 534
 535         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 536             &req, NULL, 0, 1000)) {
 537                 DPRINTF("UART disable failed (ignored)\n");
 538         }
 539 }
 540
 541 static uint8_t
 542 uslcom_get_partnum(struct uslcom_softc *sc)
 543 {
 544         struct usb_device_request req;
 545         uint8_t partnum;
 546
 547         /* Find specific chip type */
 548         partnum = 0;
 549         req.bmRequestType = USLCOM_READ;
 550         req.bRequest = USLCOM_VENDOR_SPECIFIC;
 551         USETW(req.wValue, USLCOM_GET_PARTNUM);
 552         USETW(req.wIndex, sc->sc_iface_no);
 553         USETW(req.wLength, sizeof(partnum));
 554
 555         if (usbd_do_request_flags(sc->sc_udev, NULL,
 556             &req, &partnum, 0, NULL, 1000)) {
 557                 DPRINTF("GET_PARTNUM failed\n");
 558         }
 559
 560         return(partnum);
 561 }
 562
 563 static void
 564 uslcom_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
 565 {
 566         struct uslcom_softc *sc = ucom->sc_parent;
 567         struct usb_device_request req;
 568         uint16_t ctl;
 569
 570         DPRINTF("onoff = %d\n", onoff);
 571
 572         ctl = onoff ? USLCOM_MHS_DTR_ON : 0;
 573         ctl |= USLCOM_MHS_DTR_SET;
 574
 575         req.bmRequestType = USLCOM_WRITE;
 576         req.bRequest = USLCOM_SET_MHS;
 577         USETW(req.wValue, ctl);
 578         USETW(req.wIndex, sc->sc_iface_no);
 579         USETW(req.wLength, 0);
 580
 581         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 582             &req, NULL, 0, 1000)) {
 583                 DPRINTF("Setting DTR failed (ignored)\n");
 584         }
 585 }
 586
 587 static void
 588 uslcom_set_rts(struct ucom_softc *ucom, uint8_t onoff)
 589 {
 590         struct uslcom_softc *sc = ucom->sc_parent;
 591         struct usb_device_request req;
 592         uint16_t ctl;
 593
 594         DPRINTF("onoff = %d\n", onoff);
 595
 596         ctl = onoff ? USLCOM_MHS_RTS_ON : 0;
 597         ctl |= USLCOM_MHS_RTS_SET;
 598
 599         req.bmRequestType = USLCOM_WRITE;
 600         req.bRequest = USLCOM_SET_MHS;
 601         USETW(req.wValue, ctl);
 602         USETW(req.wIndex, sc->sc_iface_no);
 603         USETW(req.wLength, 0);
 604
 605         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 606             &req, NULL, 0, 1000)) {
 607                 DPRINTF("Setting DTR failed (ignored)\n");
 608         }
 609 }
 610
 611 static int
 612 uslcom_pre_param(struct ucom_softc *ucom, struct termios *t)
 613 {
 614         if (t->c_ospeed <= 0 || t->c_ospeed > 921600)
 615                 return (EINVAL);
 616         return (0);
 617 }
 618
 619 static void
 620 uslcom_param(struct ucom_softc *ucom, struct termios *t)
 621 {
 622         struct uslcom_softc *sc = ucom->sc_parent;
 623         struct usb_device_request req;
 624         uint32_t baudrate, flowctrl[4];
 625         uint16_t data;
 626
 627         DPRINTF("\n");
 628
 629         baudrate = t->c_ospeed;
 630         req.bmRequestType = USLCOM_WRITE;
 631         req.bRequest = USLCOM_SET_BAUDRATE;
 632         USETW(req.wValue, 0);
 633         USETW(req.wIndex, sc->sc_iface_no);
 634         USETW(req.wLength, sizeof(baudrate));
 635
 636         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 637             &req, &baudrate, 0, 1000)) {
 638                 DPRINTF("Set baudrate failed (ignored)\n");
 639         }
 640
 641         if (t->c_cflag & CSTOPB)
 642                 data = USLCOM_STOP_BITS_2;
 643         else
 644                 data = USLCOM_STOP_BITS_1;
 645         if (t->c_cflag & PARENB) {
 646                 if (t->c_cflag & PARODD)
 647                         data |= USLCOM_PARITY_ODD;
 648                 else
 649                         data |= USLCOM_PARITY_EVEN;
 650         } else
 651                 data |= USLCOM_PARITY_NONE;
 652         switch (t->c_cflag & CSIZE) {
 653         case CS5:
 654                 data |= USLCOM_SET_DATA_BITS(5);
 655                 break;
 656         case CS6:
 657                 data |= USLCOM_SET_DATA_BITS(6);
 658                 break;
 659         case CS7:
 660                 data |= USLCOM_SET_DATA_BITS(7);
 661                 break;
 662         case CS8:
 663                 data |= USLCOM_SET_DATA_BITS(8);
 664                 break;
 665         }
 666
 667         req.bmRequestType = USLCOM_WRITE;
 668         req.bRequest = USLCOM_SET_LINE_CTL;
 669         USETW(req.wValue, data);
 670         USETW(req.wIndex, sc->sc_iface_no);
 671         USETW(req.wLength, 0);
 672
 673         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 674             &req, NULL, 0, 1000)) {
 675                 DPRINTF("Set format failed (ignored)\n");
 676         }
 677
 678         if (t->c_cflag & CRTSCTS) {
 679                 flowctrl[0] = htole32(USLCOM_FLOW_DTR_ON | USLCOM_FLOW_CTS_HS);
 680                 flowctrl[1] = htole32(USLCOM_FLOW_RTS_HS);
 681         } else {
 682                 flowctrl[0] = htole32(USLCOM_FLOW_DTR_ON);
 683                 flowctrl[1] = htole32(USLCOM_FLOW_RTS_ON);
 684         }
 685         flowctrl[2] = 0;
 686         flowctrl[3] = 0;
 687         req.bmRequestType = USLCOM_WRITE;
 688         req.bRequest = USLCOM_SET_FLOW;
 689         USETW(req.wValue, 0);
 690         USETW(req.wIndex, sc->sc_iface_no);
 691         USETW(req.wLength, sizeof(flowctrl));
 692
 693         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 694             &req, flowctrl, 0, 1000)) {
 695                 DPRINTF("Set flowcontrol failed (ignored)\n");
 696         }
 697 }
 698
 699 static void
 700 uslcom_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
 701 {
 702         struct uslcom_softc *sc = ucom->sc_parent;
 703
 704         DPRINTF("\n");
 705
 706         *lsr = sc->sc_lsr;
 707         *msr = sc->sc_msr;
 708 }
 709
 710 static void
 711 uslcom_set_break(struct ucom_softc *ucom, uint8_t onoff)
 712 {
 713         struct uslcom_softc *sc = ucom->sc_parent;
 714         struct usb_device_request req;
 715         uint16_t brk = onoff ? USLCOM_SET_BREAK_ON : USLCOM_SET_BREAK_OFF;
 716
 717         req.bmRequestType = USLCOM_WRITE;
 718         req.bRequest = USLCOM_SET_BREAK;
 719         USETW(req.wValue, brk);
 720         USETW(req.wIndex, sc->sc_iface_no);
 721         USETW(req.wLength, 0);
 722
 723         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 724             &req, NULL, 0, 1000)) {
 725                 DPRINTF("Set BREAK failed (ignored)\n");
 726         }
 727 }
 728
 729 static int
 730 uslcom_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
 731     int flag, struct thread *td)
 732 {
 733         struct uslcom_softc *sc = ucom->sc_parent;
 734         struct usb_device_request req;
 735         int error = 0;
 736         uint8_t latch;
 737
 738         DPRINTF("cmd=0x%08x\n", cmd);
 739
 740         switch (cmd) {
 741         case USB_GET_GPIO:
 742                 if (sc->sc_partnum < USLCOM_PARTNUM_CP2103) {
 743                         error = ENODEV;
 744                         break;
 745                 }
 746                 req.bmRequestType = USLCOM_READ;
 747                 req.bRequest = USLCOM_VENDOR_SPECIFIC;
 748                 USETW(req.wValue, USLCOM_READ_LATCH);
 749                 USETW(req.wIndex, sc->sc_iface_no);
 750                 USETW(req.wLength, sizeof(latch));
 751
 752                 if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 753                     &req, &latch, 0, 1000)) {
 754                         DPRINTF("Get LATCH failed\n");
 755                         error = EIO;
 756                 }
 757                 *(int *)data = latch;
 758                 break;
 759
 760         case USB_SET_GPIO:
 761                 if (sc->sc_partnum < USLCOM_PARTNUM_CP2103)
 762                         error = ENODEV;
 763                 else if ((sc->sc_partnum == USLCOM_PARTNUM_CP2103) ||
 764                     (sc->sc_partnum == USLCOM_PARTNUM_CP2104)) {
 765                         req.bmRequestType = USLCOM_WRITE;
 766                         req.bRequest = USLCOM_VENDOR_SPECIFIC;
 767                         USETW(req.wValue, USLCOM_WRITE_LATCH);
 768                         USETW(req.wIndex, (*(int *)data));
 769                         USETW(req.wLength, 0);
 770
 771                         if (ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 772                             &req, NULL, 0, 1000)) {
 773                                 DPRINTF("Set LATCH failed\n");
 774                                 error = EIO;
 775                         }
 776                 } else
 777                         error = ENODEV; /* Not yet */
 778                 break;
 779
 780         default:
 781                 DPRINTF("Unknown IOCTL\n");
 782                 error = ENOIOCTL;
 783                 break;
 784         }
 785         return (error);
 786 }
 787
 788 static void
 789 uslcom_write_callback(struct usb_xfer *xfer, usb_error_t error)
 790 {
 791         struct uslcom_softc *sc = usbd_xfer_softc(xfer);
 792         struct usb_page_cache *pc;
 793         uint32_t actlen;
 794
 795         switch (USB_GET_STATE(xfer)) {
 796         case USB_ST_SETUP:
 797         case USB_ST_TRANSFERRED:
 798 tr_setup:
 799                 pc = usbd_xfer_get_frame(xfer, 0);
 800                 if (ucom_get_data(&sc->sc_ucom, pc, 0,
 801                     USLCOM_BULK_BUF_SIZE, &actlen)) {
 802
 803                         DPRINTF("actlen = %d\n", actlen);
 804
 805                         usbd_xfer_set_frame_len(xfer, 0, actlen);
 806                         usbd_transfer_submit(xfer);
 807                 }
 808                 return;
 809
 810         default:                        /* Error */
 811                 if (error != USB_ERR_CANCELLED) {
 812                         /* try to clear stall first */
 813                         usbd_xfer_set_stall(xfer);
 814                         goto tr_setup;
 815                 }
 816                 return;
 817         }
 818 }
 819
 820 static void
 821 uslcom_read_callback(struct usb_xfer *xfer, usb_error_t error)
 822 {
 823         struct uslcom_softc *sc = usbd_xfer_softc(xfer);
 824         struct usb_page_cache *pc;
 825         int actlen;
 826
 827         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
 828
 829         switch (USB_GET_STATE(xfer)) {
 830         case USB_ST_TRANSFERRED:
 831                 pc = usbd_xfer_get_frame(xfer, 0);
 832                 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
 833
 834         case USB_ST_SETUP:
 835 tr_setup:
 836                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 837                 usbd_transfer_submit(xfer);
 838                 return;
 839
 840         default:                        /* Error */
 841                 if (error != USB_ERR_CANCELLED) {
 842                         /* try to clear stall first */
 843                         usbd_xfer_set_stall(xfer);
 844                         goto tr_setup;
 845                 }
 846                 return;
 847         }
 848 }
 849
 850 static void
 851 uslcom_control_callback(struct usb_xfer *xfer, usb_error_t error)
 852 {
 853         struct uslcom_softc *sc = usbd_xfer_softc(xfer);
 854         struct usb_page_cache *pc;
 855         struct usb_device_request req;
 856         uint8_t msr = 0;
 857         uint8_t buf;
 858
 859         switch (USB_GET_STATE(xfer)) {
 860         case USB_ST_TRANSFERRED:
 861                 pc = usbd_xfer_get_frame(xfer, 1);
 862                 usbd_copy_out(pc, 0, &buf, sizeof(buf));
 863                 if (buf & USLCOM_MHS_CTS)
 864                         msr |= SER_CTS;
 865                 if (buf & USLCOM_MHS_DSR)
 866                         msr |= SER_DSR;
 867                 if (buf & USLCOM_MHS_RI)
 868                         msr |= SER_RI;
 869                 if (buf & USLCOM_MHS_DCD)
 870                         msr |= SER_DCD;
 871
 872                 if (msr != sc->sc_msr) {
 873                         DPRINTF("status change msr=0x%02x "
 874                             "(was 0x%02x)\n", msr, sc->sc_msr);
 875                         sc->sc_msr = msr;
 876                         ucom_status_change(&sc->sc_ucom);
 877                 }
 878                 break;
 879
 880         case USB_ST_SETUP:
 881                 req.bmRequestType = USLCOM_READ;
 882                 req.bRequest = USLCOM_GET_MDMSTS;
 883                 USETW(req.wValue, 0);
 884                 USETW(req.wIndex, sc->sc_iface_no);
 885                 USETW(req.wLength, sizeof(buf));
 886
 887                 usbd_xfer_set_frames(xfer, 2);
 888                 usbd_xfer_set_frame_len(xfer, 0, sizeof(req));
 889                 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf));
 890
 891                 pc = usbd_xfer_get_frame(xfer, 0);
 892                 usbd_copy_in(pc, 0, &req, sizeof(req));
 893                 usbd_transfer_submit(xfer);
 894                 break;
 895
 896         default:                /* error */
 897                 if (error != USB_ERR_CANCELLED)
 898                         DPRINTF("error=%s\n", usbd_errstr(error));
 899                 break;
 900         }
 901 }
 902
 903 static void
 904 uslcom_start_read(struct ucom_softc *ucom)
 905 {
 906         struct uslcom_softc *sc = ucom->sc_parent;
 907
 908         /* start read endpoint */
 909         usbd_transfer_start(sc->sc_xfer[USLCOM_BULK_DT_RD]);
 910 }
 911
 912 static void
 913 uslcom_stop_read(struct ucom_softc *ucom)
 914 {
 915         struct uslcom_softc *sc = ucom->sc_parent;
 916
 917         /* stop read endpoint */
 918         usbd_transfer_stop(sc->sc_xfer[USLCOM_BULK_DT_RD]);
 919 }
 920
 921 static void
 922 uslcom_start_write(struct ucom_softc *ucom)
 923 {
 924         struct uslcom_softc *sc = ucom->sc_parent;
 925
 926         usbd_transfer_start(sc->sc_xfer[USLCOM_BULK_DT_WR]);
 927 }
 928
 929 static void
 930 uslcom_stop_write(struct ucom_softc *ucom)
 931 {
 932         struct uslcom_softc *sc = ucom->sc_parent;
 933
 934         usbd_transfer_stop(sc->sc_xfer[USLCOM_BULK_DT_WR]);
 935 }
 936
 937 static void
 938 uslcom_poll(struct ucom_softc *ucom)
 939 {
 940         struct uslcom_softc *sc = ucom->sc_parent;
 941         usbd_transfer_poll(sc->sc_xfer, USLCOM_N_TRANSFER);
 942 }