sys/gnu/dts/arm/am335x-evmsk.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /*
  10  * AM335x Starter Kit
  11  * http://www.ti.com/tool/tmdssk3358
  12  */
  13
  14 /dts-v1/;
  15
  16 #include "am33xx.dtsi"
  17 #include <dt-bindings/pwm/pwm.h>
  18
  19 / {
  20         model = "TI AM335x EVM-SK";
  21         compatible = "ti,am335x-evmsk", "ti,am33xx";
  22
  23         cpus {
  24                 cpu@0 {
  25                         cpu0-supply = <&vdd1_reg>;
  26                 };
  27         };
  28
  29         memory {
  30                 device_type = "memory";
  31                 reg = <0x80000000 0x10000000>; /* 256 MB */
  32         };
  33
  34         vbat: fixedregulator@0 {
  35                 compatible = "regulator-fixed";
  36                 regulator-name = "vbat";
  37                 regulator-min-microvolt = <5000000>;
  38                 regulator-max-microvolt = <5000000>;
  39                 regulator-boot-on;
  40         };
  41
  42         lis3_reg: fixedregulator@1 {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "lis3_reg";
  45                 regulator-boot-on;
  46         };
  47
  48         wl12xx_vmmc: fixedregulator@2 {
  49                 pinctrl-names = "default";
  50                 pinctrl-0 = <&wl12xx_gpio>;
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "vwl1271";
  53                 regulator-min-microvolt = <1800000>;
  54                 regulator-max-microvolt = <1800000>;
  55                 gpio = <&gpio1 29 0>;
  56                 startup-delay-us = <70000>;
  57                 enable-active-high;
  58         };
  59
  60         vtt_fixed: fixedregulator@3 {
  61                 compatible = "regulator-fixed";
  62                 regulator-name = "vtt";
  63                 regulator-min-microvolt = <1500000>;
  64                 regulator-max-microvolt = <1500000>;
  65                 gpio = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  66                 regulator-always-on;
  67                 regulator-boot-on;
  68                 enable-active-high;
  69         };
  70
  71         leds {
  72                 pinctrl-names = "default";
  73                 pinctrl-0 = <&user_leds_s0>;
  74
  75                 compatible = "gpio-leds";
  76
  77                 led@1 {
  78                         label = "evmsk:green:usr0";
  79                         gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
  80                         default-state = "off";
  81                 };
  82
  83                 led@2 {
  84                         label = "evmsk:green:usr1";
  85                         gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
  86                         default-state = "off";
  87                 };
  88
  89                 led@3 {
  90                         label = "evmsk:green:mmc0";
  91                         gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
  92                         linux,default-trigger = "mmc0";
  93                         default-state = "off";
  94                 };
  95
  96                 led@4 {
  97                         label = "evmsk:green:heartbeat";
  98                         gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
  99                         linux,default-trigger = "heartbeat";
 100                         default-state = "off";
 101                 };
 102         };
 103
 104         gpio_buttons: gpio_buttons@0 {
 105                 compatible = "gpio-keys";
 106                 #address-cells = <1>;
 107                 #size-cells = <0>;
 108
 109                 switch@1 {
 110                         label = "button0";
 111                         linux,code = <0x100>;
 112                         gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 113                 };
 114
 115                 switch@2 {
 116                         label = "button1";
 117                         linux,code = <0x101>;
 118                         gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 119                 };
 120
 121                 switch@3 {
 122                         label = "button2";
 123                         linux,code = <0x102>;
 124                         gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
 125                         gpio-key,wakeup;
 126                 };
 127
 128                 switch@4 {
 129                         label = "button3";
 130                         linux,code = <0x103>;
 131                         gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 132                 };
 133         };
 134
 135         backlight {
 136                 compatible = "pwm-backlight";
 137                 pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 138                 brightness-levels = <0 58 61 66 75 90 125 170 255>;
 139                 default-brightness-level = <8>;
 140         };
 141
 142         sound {
 143                 compatible = "ti,da830-evm-audio";
 144                 ti,model = "AM335x-EVMSK";
 145                 ti,audio-codec = <&tlv320aic3106>;
 146                 ti,mcasp-controller = <&mcasp1>;
 147                 ti,codec-clock-rate = <24000000>;
 148                 ti,audio-routing =
 149                         "Headphone Jack",       "HPLOUT",
 150                         "Headphone Jack",       "HPROUT";
 151         };
 152
 153         panel {
 154                 compatible = "ti,tilcdc,panel";
 155                 pinctrl-names = "default", "sleep";
 156                 pinctrl-0 = <&lcd_pins_default>;
 157                 pinctrl-1 = <&lcd_pins_sleep>;
 158                 status = "okay";
 159                 panel-info {
 160                         ac-bias           = <255>;
 161                         ac-bias-intrpt    = <0>;
 162                         dma-burst-sz      = <16>;
 163                         bpp               = <32>;
 164                         fdd               = <0x80>;
 165                         sync-edge         = <0>;
 166                         sync-ctrl         = <1>;
 167                         raster-order      = <0>;
 168                         fifo-th           = <0>;
 169                 };
 170                 display-timings {
 171                         480x272 {
 172                                 hactive         = <480>;
 173                                 vactive         = <272>;
 174                                 hback-porch     = <43>;
 175                                 hfront-porch    = <8>;
 176                                 hsync-len       = <4>;
 177                                 vback-porch     = <12>;
 178                                 vfront-porch    = <4>;
 179                                 vsync-len       = <10>;
 180                                 clock-frequency = <9000000>;
 181                                 hsync-active    = <0>;
 182                                 vsync-active    = <0>;
 183                         };
 184                 };
 185         };
 186 };
 187
 188 &am33xx_pinmux {
 189         pinctrl-names = "default";
 190         pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
 191
 192         lcd_pins_default: lcd_pins_default {
 193                 pinctrl-single,pins = <
 194                         0x20 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad8.lcd_data23 */
 195                         0x24 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad9.lcd_data22 */
 196                         0x28 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad10.lcd_data21 */
 197                         0x2c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad11.lcd_data20 */
 198                         0x30 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad12.lcd_data19 */
 199                         0x34 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad13.lcd_data18 */
 200                         0x38 (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad14.lcd_data17 */
 201                         0x3c (PIN_OUTPUT | MUX_MODE1)   /* gpmc_ad15.lcd_data16 */
 202                         0xa0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data0.lcd_data0 */
 203                         0xa4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data1.lcd_data1 */
 204                         0xa8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data2.lcd_data2 */
 205                         0xac (PIN_OUTPUT | MUX_MODE0)   /* lcd_data3.lcd_data3 */
 206                         0xb0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data4.lcd_data4 */
 207                         0xb4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data5.lcd_data5 */
 208                         0xb8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data6.lcd_data6 */
 209                         0xbc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data7.lcd_data7 */
 210                         0xc0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data8.lcd_data8 */
 211                         0xc4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data9.lcd_data9 */
 212                         0xc8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data10.lcd_data10 */
 213                         0xcc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data11.lcd_data11 */
 214                         0xd0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data12.lcd_data12 */
 215                         0xd4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data13.lcd_data13 */
 216                         0xd8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_data14.lcd_data14 */
 217                         0xdc (PIN_OUTPUT | MUX_MODE0)   /* lcd_data15.lcd_data15 */
 218                         0xe0 (PIN_OUTPUT | MUX_MODE0)   /* lcd_vsync.lcd_vsync */
 219                         0xe4 (PIN_OUTPUT | MUX_MODE0)   /* lcd_hsync.lcd_hsync */
 220                         0xe8 (PIN_OUTPUT | MUX_MODE0)   /* lcd_pclk.lcd_pclk */
 221                         0xec (PIN_OUTPUT | MUX_MODE0)   /* lcd_ac_bias_en.lcd_ac_bias_en */
 222                 >;
 223         };
 224
 225         lcd_pins_sleep: lcd_pins_sleep {
 226                 pinctrl-single,pins = <
 227                         0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad8.lcd_data23 */
 228                         0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad9.lcd_data22 */
 229                         0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad10.lcd_data21 */
 230                         0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad11.lcd_data20 */
 231                         0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad12.lcd_data19 */
 232                         0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad13.lcd_data18 */
 233                         0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad14.lcd_data17 */
 234                         0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ad15.lcd_data16 */
 235                         0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */
 236                         0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */
 237                         0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */
 238                         0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */
 239                         0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */
 240                         0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */
 241                         0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */
 242                         0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */
 243                         0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */
 244                         0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */
 245                         0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */
 246                         0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */
 247                         0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */
 248                         0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */
 249                         0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */
 250                         0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */
 251                         0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_vsync.lcd_vsync */
 252                         0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_hsync.lcd_hsync */
 253                         0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_pclk.lcd_pclk */
 254                         0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* lcd_ac_bias_en.lcd_ac_bias_en */
 255                 >;
 256         };
 257
 258
 259         user_leds_s0: user_leds_s0 {
 260                 pinctrl-single,pins = <
 261                         0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad4.gpio1_4 */
 262                         0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad5.gpio1_5 */
 263                         0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad6.gpio1_6 */
 264                         0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_ad7.gpio1_7 */
 265                 >;
 266         };
 267
 268         gpio_keys_s0: gpio_keys_s0 {
 269                 pinctrl-single,pins = <
 270                         0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_oen_ren.gpio2_3 */
 271                         0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_advn_ale.gpio2_2 */
 272                         0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_wait0.gpio0_30 */
 273                         0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_ben0_cle.gpio2_5 */
 274                 >;
 275         };
 276
 277         i2c0_pins: pinmux_i2c0_pins {
 278                 pinctrl-single,pins = <
 279                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 280                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 281                 >;
 282         };
 283
 284         uart0_pins: pinmux_uart0_pins {
 285                 pinctrl-single,pins = <
 286                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
 287                         0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)         /* uart0_txd.uart0_txd */
 288                 >;
 289         };
 290
 291         clkout2_pin: pinmux_clkout2_pin {
 292                 pinctrl-single,pins = <
 293                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)         /* xdma_event_intr1.clkout2 */
 294                 >;
 295         };
 296
 297         ecap2_pins: backlight_pins {
 298                 pinctrl-single,pins = <
 299                         0x19c 0x4       /* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
 300                 >;
 301         };
 302
 303         cpsw_default: cpsw_default {
 304                 pinctrl-single,pins = <
 305                         /* Slave 1 */
 306                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 307                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 308                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
 309                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
 310                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 311                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 312                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
 313                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rgmii1_rclk */
 314                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd3.rgmii1_rd3 */
 315                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd2.rgmii1_rd2 */
 316                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 317                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 318
 319                         /* Slave 2 */
 320                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a0.rgmii2_tctl */
 321                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a1.rgmii2_rctl */
 322                         0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a2.rgmii2_td3 */
 323                         0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a3.rgmii2_td2 */
 324                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a4.rgmii2_td1 */
 325                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a5.rgmii2_td0 */
 326                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)  /* gpmc_a6.rgmii2_tclk */
 327                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a7.rgmii2_rclk */
 328                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a8.rgmii2_rd3 */
 329                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a9.rgmii2_rd2 */
 330                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a10.rgmii2_rd1 */
 331                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)   /* gpmc_a11.rgmii2_rd0 */
 332                 >;
 333         };
 334
 335         cpsw_sleep: cpsw_sleep {
 336                 pinctrl-single,pins = <
 337                         /* Slave 1 reset value */
 338                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 339                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 340                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 341                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 342                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 343                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 344                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 345                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 346                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 347                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 348                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 349                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 350
 351                         /* Slave 2 reset value*/
 352                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 353                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 354                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 355                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 356                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 357                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 358                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 359                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 360                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 361                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 362                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 363                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 364                 >;
 365         };
 366
 367         davinci_mdio_default: davinci_mdio_default {
 368                 pinctrl-single,pins = <
 369                         /* MDIO */
 370                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 371                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 372                 >;
 373         };
 374
 375         davinci_mdio_sleep: davinci_mdio_sleep {
 376                 pinctrl-single,pins = <
 377                         /* MDIO reset value */
 378                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 379                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 380                 >;
 381         };
 382
 383         mmc1_pins: pinmux_mmc1_pins {
 384                 pinctrl-single,pins = <
 385                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 386                 >;
 387         };
 388
 389         mcasp1_pins: mcasp1_pins {
 390                 pinctrl-single,pins = <
 391                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 392                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 393                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 394                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 395                 >;
 396         };
 397
 398         mmc2_pins: pinmux_mmc2_pins {
 399                 pinctrl-single,pins = <
 400                         0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
 401                         0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
 402                         0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
 403                         0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
 404                         0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
 405                         0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
 406                         0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 407                 >;
 408         };
 409
 410         wl12xx_gpio: pinmux_wl12xx_gpio {
 411                 pinctrl-single,pins = <
 412                         0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 413                 >;
 414         };
 415 };
 416
 417 &uart0 {
 418         pinctrl-names = "default";
 419         pinctrl-0 = <&uart0_pins>;
 420
 421         status = "okay";
 422 };
 423
 424 &i2c0 {
 425         pinctrl-names = "default";
 426         pinctrl-0 = <&i2c0_pins>;
 427
 428         status = "okay";
 429         clock-frequency = <400000>;
 430
 431         tps: tps@2d {
 432                 reg = <0x2d>;
 433         };
 434
 435         lis331dlh: lis331dlh@18 {
 436                 compatible = "st,lis331dlh", "st,lis3lv02d";
 437                 reg = <0x18>;
 438                 Vdd-supply = <&lis3_reg>;
 439                 Vdd_IO-supply = <&lis3_reg>;
 440
 441                 st,click-single-x;
 442                 st,click-single-y;
 443                 st,click-single-z;
 444                 st,click-thresh-x = <10>;
 445                 st,click-thresh-y = <10>;
 446                 st,click-thresh-z = <10>;
 447                 st,irq1-click;
 448                 st,irq2-click;
 449                 st,wakeup-x-lo;
 450                 st,wakeup-x-hi;
 451                 st,wakeup-y-lo;
 452                 st,wakeup-y-hi;
 453                 st,wakeup-z-lo;
 454                 st,wakeup-z-hi;
 455                 st,min-limit-x = <120>;
 456                 st,min-limit-y = <120>;
 457                 st,min-limit-z = <140>;
 458                 st,max-limit-x = <550>;
 459                 st,max-limit-y = <550>;
 460                 st,max-limit-z = <750>;
 461         };
 462
 463         tlv320aic3106: tlv320aic3106@1b {
 464                 compatible = "ti,tlv320aic3106";
 465                 reg = <0x1b>;
 466                 status = "okay";
 467
 468                 /* Regulators */
 469                 AVDD-supply = <&vaux2_reg>;
 470                 IOVDD-supply = <&vaux2_reg>;
 471                 DRVDD-supply = <&vaux2_reg>;
 472                 DVDD-supply = <&vbat>;
 473         };
 474 };
 475
 476 &usb {
 477         status = "okay";
 478 };
 479
 480 &usb_ctrl_mod {
 481         status = "okay";
 482 };
 483
 484 &usb0_phy {
 485         status = "okay";
 486 };
 487
 488 &usb1_phy {
 489         status = "okay";
 490 };
 491
 492 &usb0 {
 493         status = "okay";
 494 };
 495
 496 &usb1 {
 497         status = "okay";
 498         dr_mode = "host";
 499 };
 500
 501 &cppi41dma  {
 502         status = "okay";
 503 };
 504
 505 &epwmss2 {
 506         status = "okay";
 507
 508         ecap2: ecap@48304100 {
 509                 status = "okay";
 510                 pinctrl-names = "default";
 511                 pinctrl-0 = <&ecap2_pins>;
 512         };
 513 };
 514
 515 #include "tps65910.dtsi"
 516
 517 &tps {
 518         vcc1-supply = <&vbat>;
 519         vcc2-supply = <&vbat>;
 520         vcc3-supply = <&vbat>;
 521         vcc4-supply = <&vbat>;
 522         vcc5-supply = <&vbat>;
 523         vcc6-supply = <&vbat>;
 524         vcc7-supply = <&vbat>;
 525         vccio-supply = <&vbat>;
 526
 527         regulators {
 528                 vrtc_reg: regulator@0 {
 529                         regulator-always-on;
 530                 };
 531
 532                 vio_reg: regulator@1 {
 533                         regulator-always-on;
 534                 };
 535
 536                 vdd1_reg: regulator@2 {
 537                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 538                         regulator-name = "vdd_mpu";
 539                         regulator-min-microvolt = <912500>;
 540                         regulator-max-microvolt = <1312500>;
 541                         regulator-boot-on;
 542                         regulator-always-on;
 543                 };
 544
 545                 vdd2_reg: regulator@3 {
 546                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 547                         regulator-name = "vdd_core";
 548                         regulator-min-microvolt = <912500>;
 549                         regulator-max-microvolt = <1150000>;
 550                         regulator-boot-on;
 551                         regulator-always-on;
 552                 };
 553
 554                 vdd3_reg: regulator@4 {
 555                         regulator-always-on;
 556                 };
 557
 558                 vdig1_reg: regulator@5 {
 559                         regulator-always-on;
 560                 };
 561
 562                 vdig2_reg: regulator@6 {
 563                         regulator-always-on;
 564                 };
 565
 566                 vpll_reg: regulator@7 {
 567                         regulator-always-on;
 568                 };
 569
 570                 vdac_reg: regulator@8 {
 571                         regulator-always-on;
 572                 };
 573
 574                 vaux1_reg: regulator@9 {
 575                         regulator-always-on;
 576                 };
 577
 578                 vaux2_reg: regulator@10 {
 579                         regulator-always-on;
 580                 };
 581
 582                 vaux33_reg: regulator@11 {
 583                         regulator-always-on;
 584                 };
 585
 586                 vmmc_reg: regulator@12 {
 587                         regulator-min-microvolt = <1800000>;
 588                         regulator-max-microvolt = <3300000>;
 589                         regulator-always-on;
 590                 };
 591         };
 592 };
 593
 594 &mac {
 595         pinctrl-names = "default", "sleep";
 596         pinctrl-0 = <&cpsw_default>;
 597         pinctrl-1 = <&cpsw_sleep>;
 598         dual_emac = <1>;
 599         status = "okay";
 600 };
 601
 602 &davinci_mdio {
 603         pinctrl-names = "default", "sleep";
 604         pinctrl-0 = <&davinci_mdio_default>;
 605         pinctrl-1 = <&davinci_mdio_sleep>;
 606         status = "okay";
 607 };
 608
 609 &cpsw_emac0 {
 610         phy_id = <&davinci_mdio>, <0>;
 611         phy-mode = "rgmii-txid";
 612         dual_emac_res_vlan = <1>;
 613 };
 614
 615 &cpsw_emac1 {
 616         phy_id = <&davinci_mdio>, <1>;
 617         phy-mode = "rgmii-txid";
 618         dual_emac_res_vlan = <2>;
 619 };
 620
 621 &mmc1 {
 622         status = "okay";
 623         vmmc-supply = <&vmmc_reg>;
 624         bus-width = <4>;
 625         pinctrl-names = "default";
 626         pinctrl-0 = <&mmc1_pins>;
 627         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 628 };
 629
 630 &sham {
 631         status = "okay";
 632 };
 633
 634 &aes {
 635         status = "okay";
 636 };
 637
 638 &gpio0 {
 639         ti,no-reset-on-init;
 640 };
 641
 642 &mmc2 {
 643         status = "okay";
 644         vmmc-supply = <&wl12xx_vmmc>;
 645         ti,non-removable;
 646         bus-width = <4>;
 647         cap-power-off-card;
 648         pinctrl-names = "default";
 649         pinctrl-0 = <&mmc2_pins>;
 650 };
 651
 652 &mcasp1 {
 653                 pinctrl-names = "default";
 654                 pinctrl-0 = <&mcasp1_pins>;
 655
 656                 status = "okay";
 657
 658                 op-mode = <0>;          /* MCASP_IIS_MODE */
 659                 tdm-slots = <2>;
 660                 /* 4 serializers */
 661                 serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 662                         0 0 1 2
 663                 >;
 664                 tx-num-evt = <32>;
 665                 rx-num-evt = <32>;
 666 };
 667
 668 &tscadc {
 669         status = "okay";
 670         tsc {
 671                 ti,wires = <4>;
 672                 ti,x-plate-resistance = <200>;
 673                 ti,coordinate-readouts = <5>;
 674                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 675         };
 676 };
 677
 678 &lcdc {
 679       status = "okay";
 680 };