sys/gnu/dts/arm/am437x-sk-evm.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM437x SK EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/pwm/pwm.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18
  19 / {
  20         model = "TI AM437x SK EVM";
  21         compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
  22
  23         aliases {
  24                 display0 = &lcd0;
  25         };
  26
  27         backlight {
  28                 compatible = "pwm-backlight";
  29                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  30                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  31                 default-brightness-level = <8>;
  32         };
  33
  34         sound {
  35                 compatible = "ti,da830-evm-audio";
  36                 ti,model = "AM437x-SK-EVM";
  37                 ti,audio-codec = <&tlv320aic3106>;
  38                 ti,mcasp-controller = <&mcasp1>;
  39                 ti,codec-clock-rate = <24000000>;
  40                 ti,audio-routing =
  41                         "Headphone Jack",       "HPLOUT",
  42                         "Headphone Jack",       "HPROUT";
  43         };
  44
  45         matrix_keypad: matrix_keypad@0 {
  46                 compatible = "gpio-matrix-keypad";
  47
  48                 pinctrl-names = "default";
  49                 pinctrl-0 = <&matrix_keypad_pins>;
  50
  51                 debounce-delay-ms = <5>;
  52                 col-scan-delay-us = <1500>;
  53
  54                 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH          /* Bank5, pin5 */
  55                                 &gpio5 6 GPIO_ACTIVE_HIGH>;     /* Bank5, pin6 */
  56
  57                 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH         /* Bank5, pin13 */
  58                                 &gpio5 4 GPIO_ACTIVE_HIGH>;     /* Bank5, pin4 */
  59
  60                 linux,keymap = <
  61                                 MATRIX_KEY(0, 0, KEY_DOWN)
  62                                 MATRIX_KEY(0, 1, KEY_RIGHT)
  63                                 MATRIX_KEY(1, 0, KEY_LEFT)
  64                                 MATRIX_KEY(1, 1, KEY_UP)
  65                         >;
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70
  71                 pinctrl-names = "default";
  72                 pinctrl-0 = <&leds_pins>;
  73
  74                 led@0 {
  75                         label = "am437x-sk:red:heartbeat";
  76                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 0 */
  77                         linux,default-trigger = "heartbeat";
  78                         default-state = "off";
  79                 };
  80
  81                 led@1 {
  82                         label = "am437x-sk:green:mmc1";
  83                         gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 1 */
  84                         linux,default-trigger = "mmc0";
  85                         default-state = "off";
  86                 };
  87
  88                 led@2 {
  89                         label = "am437x-sk:blue:cpu0";
  90                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 2 */
  91                         linux,default-trigger = "cpu0";
  92                         default-state = "off";
  93                 };
  94
  95                 led@3 {
  96                         label = "am437x-sk:blue:usr3";
  97                         gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 3 */
  98                         default-state = "off";
  99                 };
 100         };
 101
 102         lcd0: display {
 103                 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
 104                 label = "lcd";
 105
 106                 pinctrl-names = "default";
 107                 pinctrl-0 = <&lcd_pins>;
 108
 109                 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 110
 111                 panel-timing {
 112                         clock-frequency = <9000000>;
 113                         hactive = <480>;
 114                         vactive = <272>;
 115                         hfront-porch = <2>;
 116                         hback-porch = <2>;
 117                         hsync-len = <41>;
 118                         vfront-porch = <2>;
 119                         vback-porch = <2>;
 120                         vsync-len = <10>;
 121                         hsync-active = <0>;
 122                         vsync-active = <0>;
 123                         de-active = <1>;
 124                         pixelclk-active = <1>;
 125                 };
 126
 127                 port {
 128                         lcd_in: endpoint {
 129                                 remote-endpoint = <&dpi_out>;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &am43xx_pinmux {
 136         matrix_keypad_pins: matrix_keypad_pins {
 137                 pinctrl-single,pins = <
 138                         0x24c (PIN_OUTPUT | MUX_MODE7)  /* gpio5_13.gpio5_13 */
 139                         0x250 (PIN_OUTPUT | MUX_MODE7)  /* spi4_sclk.gpio5_4 */
 140                         0x254 (PIN_INPUT | MUX_MODE7)   /* spi4_d0.gpio5_5 */
 141                         0x258 (PIN_INPUT | MUX_MODE7)   /* spi4_d1.gpio5_5 */
 142                 >;
 143         };
 144
 145         leds_pins: leds_pins {
 146                 pinctrl-single,pins = <
 147                         0x228 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rxd.gpio5_2 */
 148                         0x22c (PIN_OUTPUT | MUX_MODE7)  /* uart3_txd.gpio5_3 */
 149                         0x230 (PIN_OUTPUT | MUX_MODE7)  /* uart3_ctsn.gpio5_0 */
 150                         0x234 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rtsn.gpio5_1 */
 151                 >;
 152         };
 153
 154         i2c0_pins: i2c0_pins {
 155                 pinctrl-single,pins = <
 156                         0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 157                         0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 158                 >;
 159         };
 160
 161         i2c1_pins: i2c1_pins {
 162                 pinctrl-single,pins = <
 163                         0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 164                         0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 165                 >;
 166         };
 167
 168         mmc1_pins: pinmux_mmc1_pins {
 169                 pinctrl-single,pins = <
 170                         0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
 171                         0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
 172                         0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
 173                         0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
 174                         0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
 175                         0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
 176                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 177                 >;
 178         };
 179
 180         ecap0_pins: backlight_pins {
 181                 pinctrl-single,pins = <
 182                         0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 183                 >;
 184         };
 185
 186         edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 187                 pinctrl-single,pins = <
 188                         0x74 (PIN_INPUT | MUX_MODE7)    /* gpmc_wpn.gpio0_31 */
 189                         0x78 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_be1n.gpio1_28 */
 190                 >;
 191         };
 192
 193         vpfe0_pins_default: vpfe0_pins_default {
 194                 pinctrl-single,pins = <
 195                         0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 196                         0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
 197                         0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
 198                         0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
 199                         0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
 200                         0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
 201                         0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
 202                         0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
 203                         0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
 204                         0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
 205                         0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
 206                         0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
 207                         0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
 208                         0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
 209                         0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 210                 >;
 211         };
 212
 213         vpfe0_pins_sleep: vpfe0_pins_sleep {
 214                 pinctrl-single,pins = <
 215                         0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 216                         0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 217                         0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 218                         0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 219                         0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 220                         0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 221                         0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 222                         0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 223                         0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 224                         0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 225                         0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 226                         0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 227                         0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 228                         0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 229                         0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 230                 >;
 231         };
 232
 233         cpsw_default: cpsw_default {
 234                 pinctrl-single,pins = <
 235                         /* Slave 1 */
 236                         0x12c (PIN_OUTPUT | MUX_MODE2)  /* mii1_txclk.rmii1_tclk */
 237                         0x114 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txen.rgmii1_tctl */
 238                         0x128 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd0.rgmii1_td0 */
 239                         0x124 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd1.rgmii1_td1 */
 240                         0x120 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd0.rgmii1_td2 */
 241                         0x11c (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd1.rgmii1_td3 */
 242                         0x130 (PIN_INPUT | MUX_MODE2)   /* mii1_rxclk.rmii1_rclk */
 243                         0x118 (PIN_INPUT | MUX_MODE2)   /* mii1_rxdv.rgmii1_rctl */
 244                         0x140 (PIN_INPUT | MUX_MODE2)   /* mii1_rxd0.rgmii1_rd0 */
 245                         0x13c (PIN_INPUT | MUX_MODE2)   /* mii1_rxd1.rgmii1_rd1 */
 246                         0x138 (PIN_INPUT | MUX_MODE2)   /* mii1_rxd0.rgmii1_rd2 */
 247                         0x134 (PIN_INPUT | MUX_MODE2)   /* mii1_rxd1.rgmii1_rd3 */
 248
 249                         /* Slave 2 */
 250                         0x58 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a6.rgmii2_tclk */
 251                         0x40 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a0.rgmii2_tctl */
 252                         0x54 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a5.rgmii2_td0 */
 253                         0x50 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a4.rgmii2_td1 */
 254                         0x4c (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a3.rgmii2_td2 */
 255                         0x48 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a2.rgmii2_td3 */
 256                         0x5c (PIN_INPUT | MUX_MODE2)    /* gpmc_a7.rgmii2_rclk */
 257                         0x44 (PIN_INPUT | MUX_MODE2)    /* gpmc_a1.rgmii2_rtcl */
 258                         0x6c (PIN_INPUT | MUX_MODE2)    /* gpmc_a11.rgmii2_rd0 */
 259                         0x68 (PIN_INPUT | MUX_MODE2)    /* gpmc_a10.rgmii2_rd1 */
 260                         0x64 (PIN_INPUT | MUX_MODE2)    /* gpmc_a9.rgmii2_rd2 */
 261                         0x60 (PIN_INPUT | MUX_MODE2)    /* gpmc_a8.rgmii2_rd3 */
 262                 >;
 263         };
 264
 265         cpsw_sleep: cpsw_sleep {
 266                 pinctrl-single,pins = <
 267                         /* Slave 1 reset value */
 268                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 269                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 270                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 271                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 272                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 273                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 274                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 275                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 276                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 277                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 278                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 279                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 280
 281                         /* Slave 2 reset value */
 282                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 283                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 284                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 285                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 286                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 287                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 288                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 289                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 290                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 291                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 292                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 293                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 294                 >;
 295         };
 296
 297         davinci_mdio_default: davinci_mdio_default {
 298                 pinctrl-single,pins = <
 299                         /* MDIO */
 300                         0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)   /* mdio_data.mdio_data */
 301                         0x14c (PIN_OUTPUT | MUX_MODE0)                  /* mdio_clk.mdio_clk */
 302                 >;
 303         };
 304
 305         davinci_mdio_sleep: davinci_mdio_sleep {
 306                 pinctrl-single,pins = <
 307                         /* MDIO reset value */
 308                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 309                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 310                 >;
 311         };
 312
 313         dss_pins: dss_pins {
 314                 pinctrl-single,pins = <
 315                         0x020 (PIN_OUTPUT | MUX_MODE1)  /* gpmc ad 8 -> DSS DATA 23 */
 316                         0x024 (PIN_OUTPUT | MUX_MODE1)
 317                         0x028 (PIN_OUTPUT | MUX_MODE1)
 318                         0x02c (PIN_OUTPUT | MUX_MODE1)
 319                         0x030 (PIN_OUTPUT | MUX_MODE1)
 320                         0x034 (PIN_OUTPUT | MUX_MODE1)
 321                         0x038 (PIN_OUTPUT | MUX_MODE1)
 322                         0x03c (PIN_OUTPUT | MUX_MODE1)  /* gpmc ad 15 -> DSS DATA 16 */
 323                         0x0a0 (PIN_OUTPUT | MUX_MODE0)  /* DSS DATA 0 */
 324                         0x0a4 (PIN_OUTPUT | MUX_MODE0)
 325                         0x0a8 (PIN_OUTPUT | MUX_MODE0)
 326                         0x0ac (PIN_OUTPUT | MUX_MODE0)
 327                         0x0b0 (PIN_OUTPUT | MUX_MODE0)
 328                         0x0b4 (PIN_OUTPUT | MUX_MODE0)
 329                         0x0b8 (PIN_OUTPUT | MUX_MODE0)
 330                         0x0bc (PIN_OUTPUT | MUX_MODE0)
 331                         0x0c0 (PIN_OUTPUT | MUX_MODE0)
 332                         0x0c4 (PIN_OUTPUT | MUX_MODE0)
 333                         0x0c8 (PIN_OUTPUT | MUX_MODE0)
 334                         0x0cc (PIN_OUTPUT | MUX_MODE0)
 335                         0x0d0 (PIN_OUTPUT | MUX_MODE0)
 336                         0x0d4 (PIN_OUTPUT | MUX_MODE0)
 337                         0x0d8 (PIN_OUTPUT | MUX_MODE0)
 338                         0x0dc (PIN_OUTPUT | MUX_MODE0)  /* DSS DATA 15 */
 339                         0x0e0 (PIN_OUTPUT | MUX_MODE0)  /* DSS VSYNC */
 340                         0x0e4 (PIN_OUTPUT | MUX_MODE0)  /* DSS HSYNC */
 341                         0x0e8 (PIN_OUTPUT | MUX_MODE0)  /* DSS PCLK */
 342                         0x0ec (PIN_OUTPUT | MUX_MODE0)  /* DSS AC BIAS EN */
 343
 344                 >;
 345         };
 346
 347         qspi_pins: qspi_pins {
 348                 pinctrl-single,pins = <
 349                         0x7c (PIN_OUTPUT | MUX_MODE3)   /* gpmc_csn0.qspi_csn */
 350                         0x88 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_csn3.qspi_clk */
 351                         0x90 (PIN_INPUT | MUX_MODE3)    /* gpmc_advn_ale.qspi_d0 */
 352                         0x94 (PIN_INPUT | MUX_MODE3)    /* gpmc_oen_ren.qspi_d1 */
 353                         0x98 (PIN_INPUT | MUX_MODE3)    /* gpmc_wen.qspi_d2 */
 354                         0x9c (PIN_INPUT | MUX_MODE3)    /* gpmc_be0n_cle.qspi_d3 */
 355                 >;
 356         };
 357
 358         mcasp1_pins: mcasp1_pins {
 359                 pinctrl-single,pins = <
 360                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_crs.mcasp1_aclkx */
 361                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_rxerr.mcasp1_fsx */
 362                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 363                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* rmii1_ref_clk.mcasp1_axr3 */
 364                 >;
 365         };
 366
 367         lcd_pins: lcd_pins {
 368                 pinctrl-single,pins = <
 369                         0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 370                 >;
 371         };
 372
 373         usb1_pins: usb1_pins {
 374                 pinctrl-single,pins = <
 375                         0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 376                 >;
 377         };
 378
 379         usb2_pins: usb2_pins {
 380                 pinctrl-single,pins = <
 381                         0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 382                 >;
 383         };
 384 };
 385
 386 &i2c0 {
 387         status = "okay";
 388         pinctrl-names = "default";
 389         pinctrl-0 = <&i2c0_pins>;
 390         clock-frequency = <400000>;
 391
 392         tps@24 {
 393                 compatible = "ti,tps65218";
 394                 reg = <0x24>;
 395                 interrupt-parent = <&gic>;
 396                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 397                 interrupt-controller;
 398                 #interrupt-cells = <2>;
 399
 400                 dcdc1: regulator-dcdc1 {
 401                         compatible = "ti,tps65218-dcdc1";
 402                         /* VDD_CORE limits min of OPP50 and max of OPP100 */
 403                         regulator-name = "vdd_core";
 404                         regulator-min-microvolt = <912000>;
 405                         regulator-max-microvolt = <1144000>;
 406                         regulator-boot-on;
 407                         regulator-always-on;
 408                 };
 409
 410                 dcdc2: regulator-dcdc2 {
 411                         compatible = "ti,tps65218-dcdc2";
 412                         /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 413                         regulator-name = "vdd_mpu";
 414                         regulator-min-microvolt = <912000>;
 415                         regulator-max-microvolt = <1378000>;
 416                         regulator-boot-on;
 417                         regulator-always-on;
 418                 };
 419
 420                 dcdc3: regulator-dcdc3 {
 421                         compatible = "ti,tps65218-dcdc3";
 422                         regulator-name = "vdds_ddr";
 423                         regulator-min-microvolt = <1500000>;
 424                         regulator-max-microvolt = <1500000>;
 425                         regulator-boot-on;
 426                         regulator-always-on;
 427                 };
 428
 429                 dcdc4: regulator-dcdc4 {
 430                         compatible = "ti,tps65218-dcdc4";
 431                         regulator-name = "v3_3d";
 432                         regulator-min-microvolt = <3300000>;
 433                         regulator-max-microvolt = <3300000>;
 434                         regulator-boot-on;
 435                         regulator-always-on;
 436                 };
 437
 438                 ldo1: regulator-ldo1 {
 439                         compatible = "ti,tps65218-ldo1";
 440                         regulator-name = "v1_8d";
 441                         regulator-min-microvolt = <1800000>;
 442                         regulator-max-microvolt = <1800000>;
 443                         regulator-boot-on;
 444                         regulator-always-on;
 445                 };
 446
 447                 power-button {
 448                         compatible = "ti,tps65218-pwrbutton";
 449                         status = "okay";
 450                         interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
 451                 };
 452         };
 453
 454         at24@50 {
 455                 compatible = "at24,24c256";
 456                 pagesize = <64>;
 457                 reg = <0x50>;
 458         };
 459 };
 460
 461 &i2c1 {
 462         status = "okay";
 463         pinctrl-names = "default";
 464         pinctrl-0 = <&i2c1_pins>;
 465         clock-frequency = <400000>;
 466
 467         edt-ft5306@38 {
 468                 status = "okay";
 469                 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
 470                 pinctrl-names = "default";
 471                 pinctrl-0 = <&edt_ft5306_ts_pins>;
 472
 473                 reg = <0x38>;
 474                 interrupt-parent = <&gpio0>;
 475                 interrupts = <31 0>;
 476
 477                 wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 478
 479                 touchscreen-size-x = <480>;
 480                 touchscreen-size-y = <272>;
 481         };
 482
 483         tlv320aic3106: tlv320aic3106@1b {
 484                 compatible = "ti,tlv320aic3106";
 485                 reg = <0x1b>;
 486                 status = "okay";
 487
 488                 /* Regulators */
 489                 AVDD-supply = <&dcdc4>;
 490                 IOVDD-supply = <&dcdc4>;
 491                 DRVDD-supply = <&dcdc4>;
 492                 DVDD-supply = <&ldo1>;
 493         };
 494
 495         lis331dlh@18 {
 496                 compatible = "st,lis331dlh";
 497                 reg = <0x18>;
 498                 status = "okay";
 499
 500                 Vdd-supply = <&dcdc4>;
 501                 Vdd_IO-supply = <&dcdc4>;
 502                 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
 503         };
 504 };
 505
 506 &epwmss0 {
 507         status = "okay";
 508 };
 509
 510 &ecap0 {
 511         status = "okay";
 512         pinctrl-names = "default";
 513         pinctrl-0 = <&ecap0_pins>;
 514 };
 515
 516 &gpio0 {
 517         status = "okay";
 518 };
 519
 520 &gpio1 {
 521         status = "okay";
 522 };
 523
 524 &gpio5 {
 525         status = "okay";
 526 };
 527
 528 &mmc1 {
 529         status = "okay";
 530         pinctrl-names = "default";
 531         pinctrl-0 = <&mmc1_pins>;
 532
 533         vmmc-supply = <&dcdc4>;
 534         bus-width = <4>;
 535         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 536 };
 537
 538 &usb2_phy1 {
 539         status = "okay";
 540 };
 541
 542 &usb1 {
 543         dr_mode = "peripheral";
 544         status = "okay";
 545         pinctrl-names = "default";
 546         pinctrl-0 = <&usb1_pins>;
 547 };
 548
 549 &usb2_phy2 {
 550         status = "okay";
 551 };
 552
 553 &usb2 {
 554         dr_mode = "host";
 555         status = "okay";
 556         pinctrl-names = "default";
 557         pinctrl-0 = <&usb2_pins>;
 558 };
 559
 560 &qspi {
 561         status = "okay";
 562         pinctrl-names = "default";
 563         pinctrl-0 = <&qspi_pins>;
 564
 565         spi-max-frequency = <48000000>;
 566         m25p80@0 {
 567                 compatible = "mx66l51235l";
 568                 spi-max-frequency = <48000000>;
 569                 reg = <0>;
 570                 spi-cpol;
 571                 spi-cpha;
 572                 spi-tx-bus-width = <1>;
 573                 spi-rx-bus-width = <4>;
 574                 #address-cells = <1>;
 575                 #size-cells = <1>;
 576
 577                 /* MTD partition table.
 578                  * The ROM checks the first 512KiB
 579                  * for a valid file to boot(XIP).
 580                  */
 581                 partition@0 {
 582                         label = "QSPI.U_BOOT";
 583                         reg = <0x00000000 0x000080000>;
 584                 };
 585                 partition@1 {
 586                         label = "QSPI.U_BOOT.backup";
 587                         reg = <0x00080000 0x00080000>;
 588                 };
 589                 partition@2 {
 590                         label = "QSPI.U-BOOT-SPL_OS";
 591                         reg = <0x00100000 0x00010000>;
 592                 };
 593                 partition@3 {
 594                         label = "QSPI.U_BOOT_ENV";
 595                         reg = <0x00110000 0x00010000>;
 596                 };
 597                 partition@4 {
 598                         label = "QSPI.U-BOOT-ENV.backup";
 599                         reg = <0x00120000 0x00010000>;
 600                 };
 601                 partition@5 {
 602                         label = "QSPI.KERNEL";
 603                         reg = <0x00130000 0x0800000>;
 604                 };
 605                 partition@6 {
 606                         label = "QSPI.FILESYSTEM";
 607                         reg = <0x00930000 0x36D0000>;
 608                 };
 609         };
 610 };
 611
 612 &mac {
 613         pinctrl-names = "default", "sleep";
 614         pinctrl-0 = <&cpsw_default>;
 615         pinctrl-1 = <&cpsw_sleep>;
 616         dual_emac = <1>;
 617         status = "okay";
 618 };
 619
 620 &davinci_mdio {
 621         pinctrl-names = "default", "sleep";
 622         pinctrl-0 = <&davinci_mdio_default>;
 623         pinctrl-1 = <&davinci_mdio_sleep>;
 624         status = "okay";
 625 };
 626
 627 &cpsw_emac0 {
 628         phy_id = <&davinci_mdio>, <4>;
 629         phy-mode = "rgmii";
 630         dual_emac_res_vlan = <1>;
 631 };
 632
 633 &cpsw_emac1 {
 634         phy_id = <&davinci_mdio>, <5>;
 635         phy-mode = "rgmii";
 636         dual_emac_res_vlan = <2>;
 637 };
 638
 639 &elm {
 640         status = "okay";
 641 };
 642
 643 &mcasp1 {
 644         pinctrl-names = "default";
 645         pinctrl-0 = <&mcasp1_pins>;
 646
 647         status = "okay";
 648
 649         op-mode = <0>;
 650         tdm-slots = <2>;
 651         serial-dir = <
 652                 0 0 1 2
 653         >;
 654
 655         tx-num-evt = <1>;
 656         rx-num-evt = <1>;
 657 };
 658
 659 &dss {
 660         status = "okay";
 661
 662         pinctrl-names = "default";
 663         pinctrl-0 = <&dss_pins>;
 664
 665         port {
 666                 dpi_out: endpoint@0 {
 667                         remote-endpoint = <&lcd_in>;
 668                         data-lines = <24>;
 669                 };
 670         };
 671 };
 672
 673 &rtc {
 674         status = "okay";
 675 };
 676
 677 &wdt {
 678         status = "okay";
 679 };
 680
 681 &cpu {
 682         cpu0-supply = <&dcdc2>;
 683 };
 684
 685 &vpfe0 {
 686         status = "okay";
 687         pinctrl-names = "default", "sleep";
 688         pinctrl-0 = <&vpfe0_pins_default>;
 689         pinctrl-1 = <&vpfe0_pins_sleep>;
 690
 691         /* Camera port */
 692         port {
 693                 vpfe0_ep: endpoint {
 694                         /* remote-endpoint = <&sensor>; add once we have it */
 695                         ti,am437x-vpfe-interface = <0>;
 696                         bus-width = <8>;
 697                         hsync-active = <0>;
 698                         vsync-active = <0>;
 699                 };
 700         };
 701 };