sys/gnu/dts/arm/am43x-epos-evm.dts

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM43x EPOS EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/gpio/gpio.h>
  16 #include <dt-bindings/pwm/pwm.h>
  17
  18 / {
  19         model = "TI AM43x EPOS EVM";
  20         compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
  21
  22         aliases {
  23                 display0 = &lcd0;
  24         };
  25
  26         vmmcsd_fixed: fixedregulator-sd {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "vmmcsd_fixed";
  29                 regulator-min-microvolt = <3300000>;
  30                 regulator-max-microvolt = <3300000>;
  31                 enable-active-high;
  32         };
  33
  34         lcd0: display {
  35                 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
  36                 label = "lcd";
  37
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&lcd_pins>;
  40
  41                 /*
  42                  * SelLCDorHDMI, LOW to select HDMI. This is not really the
  43                  * panel's enable GPIO, but we don't have HDMI driver support nor
  44                  * support to switch between two displays, so using this gpio as
  45                  * panel's enable should be safe.
  46                  */
  47                 enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
  48
  49                 panel-timing {
  50                         clock-frequency = <33000000>;
  51                         hactive = <800>;
  52                         vactive = <480>;
  53                         hfront-porch = <210>;
  54                         hback-porch = <16>;
  55                         hsync-len = <30>;
  56                         vback-porch = <10>;
  57                         vfront-porch = <22>;
  58                         vsync-len = <13>;
  59                         hsync-active = <0>;
  60                         vsync-active = <0>;
  61                         de-active = <1>;
  62                         pixelclk-active = <1>;
  63                 };
  64
  65                 port {
  66                         lcd_in: endpoint {
  67                                 remote-endpoint = <&dpi_out>;
  68                         };
  69                 };
  70         };
  71
  72         am43xx_pinmux: pinmux@44e10800 {
  73                 cpsw_default: cpsw_default {
  74                         pinctrl-single,pins = <
  75                                 /* Slave 1 */
  76                                 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
  77                                 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_rxerr.rmii1_rxerr */
  78                                 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
  79                                 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_rxdv.rmii1_rxdv */
  80                                 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
  81                                 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
  82                                 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_rxd1.rmii1_rxd1 */
  83                                 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_rxd0.rmii1_rxd0 */
  84                                 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* rmii1_refclk.rmii1_refclk */
  85                         >;
  86                 };
  87
  88                 cpsw_sleep: cpsw_sleep {
  89                         pinctrl-single,pins = <
  90                                 /* Slave 1 reset value */
  91                                 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
  92                                 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  93                                 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  94                                 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  95                                 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  96                                 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  97                                 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
  98                                 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
  99                                 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 100                         >;
 101                 };
 102
 103                 davinci_mdio_default: davinci_mdio_default {
 104                         pinctrl-single,pins = <
 105                                 /* MDIO */
 106                                 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 107                                 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 108                         >;
 109                 };
 110
 111                 davinci_mdio_sleep: davinci_mdio_sleep {
 112                         pinctrl-single,pins = <
 113                                 /* MDIO reset value */
 114                                 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 115                                 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 116                         >;
 117                 };
 118
 119                 i2c0_pins: pinmux_i2c0_pins {
 120                         pinctrl-single,pins = <
 121                                 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 122                                 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 123                         >;
 124                 };
 125
 126                 nand_flash_x8: nand_flash_x8 {
 127                         pinctrl-single,pins = <
 128                                 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a0.SELQSPIorNAND/GPIO */
 129                                 0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad0.gpmc_ad0 */
 130                                 0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad1.gpmc_ad1 */
 131                                 0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad2.gpmc_ad2 */
 132                                 0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad3.gpmc_ad3 */
 133                                 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad4.gpmc_ad4 */
 134                                 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad5.gpmc_ad5 */
 135                                 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad6.gpmc_ad6 */
 136                                 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)   /* gpmc_ad7.gpmc_ad7 */
 137                                 0x70 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_wait0.gpmc_wait0 */
 138                                 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_wpn.gpmc_wpn */
 139                                 0x7c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn0.gpmc_csn0  */
 140                                 0x90 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_advn_ale.gpmc_advn_ale */
 141                                 0x94 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_oen_ren.gpmc_oen_ren */
 142                                 0x98 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_wen.gpmc_wen */
 143                                 0x9c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_be0n_cle.gpmc_be0n_cle */
 144                         >;
 145                 };
 146
 147                 ecap0_pins: backlight_pins {
 148                         pinctrl-single,pins = <
 149                                 0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 150                         >;
 151                 };
 152
 153                 i2c2_pins: pinmux_i2c2_pins {
 154                         pinctrl-single,pins = <
 155                                 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
 156                                 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
 157                         >;
 158                 };
 159
 160                 spi0_pins: pinmux_spi0_pins {
 161                         pinctrl-single,pins = <
 162                                 0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
 163                                 0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
 164                                 0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
 165                                 0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
 166                         >;
 167                 };
 168
 169                 spi1_pins: pinmux_spi1_pins {
 170                         pinctrl-single,pins = <
 171                                 0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
 172                                 0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
 173                                 0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
 174                                 0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
 175                         >;
 176                 };
 177
 178                 mmc1_pins: pinmux_mmc1_pins {
 179                         pinctrl-single,pins = <
 180                                 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 181                         >;
 182                 };
 183
 184                 qspi1_default: qspi1_default {
 185                         pinctrl-single,pins = <
 186                                 0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
 187                                 0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
 188                                 0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
 189                                 0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
 190                                 0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
 191                                 0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
 192                         >;
 193                 };
 194
 195                 pixcir_ts_pins: pixcir_ts_pins {
 196                         pinctrl-single,pins = <
 197                                 0x44 (PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_a1.gpio1_17 */
 198                         >;
 199                 };
 200
 201                 hdq_pins: pinmux_hdq_pins {
 202                         pinctrl-single,pins = <
 203                                 0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 204                         >;
 205                 };
 206
 207                 dss_pins: dss_pins {
 208                         pinctrl-single,pins = <
 209                                 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
 210                                 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 211                                 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 212                                 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
 213                                 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 214                                 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 215                                 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 216                                 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
 217                                 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
 218                                 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 219                                 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 220                                 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
 221                                 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 222                                 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 223                                 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 224                                 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
 225                                 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 226                                 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 227                                 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 228                                 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
 229                                 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 230                                 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 231                                 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 232                                 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
 233                                 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
 234                                 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
 235                                 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
 236                                 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 237                         >;
 238                 };
 239
 240                 lcd_pins: lcd_pins {
 241                         pinctrl-single,pins = <
 242                                 /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
 243                                 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
 244                         >;
 245                 };
 246
 247                 vpfe1_pins_default: vpfe1_pins_default {
 248                         pinctrl-single,pins = <
 249                                 0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
 250                                 0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
 251                                 0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
 252                                 0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
 253                                 0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
 254                                 0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
 255                                 0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
 256                                 0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
 257                                 0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
 258                                 0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
 259                                 0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
 260                                 0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
 261                                 0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
 262                         >;
 263                 };
 264
 265                 vpfe1_pins_sleep: vpfe1_pins_sleep {
 266                         pinctrl-single,pins = <
 267                                 0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 268                                 0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 269                                 0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 270                                 0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 271                                 0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 272                                 0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 273                                 0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 274                                 0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 275                                 0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 276                                 0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 277                                 0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 278                                 0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 279                                 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 280                         >;
 281                 };
 282         };
 283
 284         matrix_keypad: matrix_keypad@0 {
 285                         compatible = "gpio-matrix-keypad";
 286                         debounce-delay-ms = <5>;
 287                         col-scan-delay-us = <2>;
 288
 289                         row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH         /* Bank0, pin12 */
 290                                      &gpio0 13 GPIO_ACTIVE_HIGH         /* Bank0, pin13 */
 291                                      &gpio0 14 GPIO_ACTIVE_HIGH         /* Bank0, pin14 */
 292                                      &gpio0 15 GPIO_ACTIVE_HIGH>;       /* Bank0, pin15 */
 293
 294                         col-gpios = <&gpio3 9 GPIO_ACTIVE_HIGH          /* Bank3, pin9 */
 295                                      &gpio3 10 GPIO_ACTIVE_HIGH         /* Bank3, pin10 */
 296                                      &gpio2 18 GPIO_ACTIVE_HIGH         /* Bank2, pin18 */
 297                                      &gpio2 19 GPIO_ACTIVE_HIGH>;       /* Bank2, pin19 */
 298
 299                         linux,keymap = <0x00000201      /* P1 */
 300                                 0x01000204      /* P4 */
 301                                 0x02000207      /* P7 */
 302                                 0x0300020a      /* NUMERIC_STAR */
 303                                 0x00010202      /* P2 */
 304                                 0x01010205      /* P5 */
 305                                 0x02010208      /* P8 */
 306                                 0x03010200      /* P0 */
 307                                 0x00020203      /* P3 */
 308                                 0x01020206      /* P6 */
 309                                 0x02020209      /* P9 */
 310                                 0x0302020b      /* NUMERIC_POUND */
 311                                 0x00030067      /* UP */
 312                                 0x0103006a      /* RIGHT */
 313                                 0x0203006c      /* DOWN */
 314                                 0x03030069>;    /* LEFT */
 315                 };
 316
 317         backlight {
 318                 compatible = "pwm-backlight";
 319                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 320                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
 321                 default-brightness-level = <8>;
 322         };
 323 };
 324
 325 &mmc1 {
 326         status = "okay";
 327         vmmc-supply = <&vmmcsd_fixed>;
 328         bus-width = <4>;
 329         pinctrl-names = "default";
 330         pinctrl-0 = <&mmc1_pins>;
 331         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 332 };
 333
 334 &mac {
 335         pinctrl-names = "default", "sleep";
 336         pinctrl-0 = <&cpsw_default>;
 337         pinctrl-1 = <&cpsw_sleep>;
 338         status = "okay";
 339 };
 340
 341 &davinci_mdio {
 342         pinctrl-names = "default", "sleep";
 343         pinctrl-0 = <&davinci_mdio_default>;
 344         pinctrl-1 = <&davinci_mdio_sleep>;
 345         status = "okay";
 346 };
 347
 348 &cpsw_emac0 {
 349         phy_id = <&davinci_mdio>, <16>;
 350         phy-mode = "rmii";
 351 };
 352
 353 &cpsw_emac1 {
 354         phy_id = <&davinci_mdio>, <1>;
 355         phy-mode = "rmii";
 356 };
 357
 358 &phy_sel {
 359         rmii-clock-ext;
 360 };
 361
 362 &i2c0 {
 363         status = "okay";
 364         pinctrl-names = "default";
 365         pinctrl-0 = <&i2c0_pins>;
 366         clock-frequency = <400000>;
 367
 368         tps65218: tps65218@24 {
 369                 reg = <0x24>;
 370                 compatible = "ti,tps65218";
 371                 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
 372                 interrupt-parent = <&gic>;
 373                 interrupt-controller;
 374                 #interrupt-cells = <2>;
 375
 376                 dcdc1: regulator-dcdc1 {
 377                         compatible = "ti,tps65218-dcdc1";
 378                         regulator-name = "vdd_core";
 379                         regulator-min-microvolt = <912000>;
 380                         regulator-max-microvolt = <1144000>;
 381                         regulator-boot-on;
 382                         regulator-always-on;
 383                 };
 384
 385                 dcdc2: regulator-dcdc2 {
 386                         compatible = "ti,tps65218-dcdc2";
 387                         regulator-name = "vdd_mpu";
 388                         regulator-min-microvolt = <912000>;
 389                         regulator-max-microvolt = <1378000>;
 390                         regulator-boot-on;
 391                         regulator-always-on;
 392                 };
 393
 394                 dcdc3: regulator-dcdc3 {
 395                         compatible = "ti,tps65218-dcdc3";
 396                         regulator-name = "vdcdc3";
 397                         regulator-min-microvolt = <1500000>;
 398                         regulator-max-microvolt = <1500000>;
 399                         regulator-boot-on;
 400                         regulator-always-on;
 401                 };
 402
 403                 dcdc5: regulator-dcdc5 {
 404                         compatible = "ti,tps65218-dcdc5";
 405                         regulator-name = "v1_0bat";
 406                         regulator-min-microvolt = <1000000>;
 407                         regulator-max-microvolt = <1000000>;
 408                 };
 409
 410                 dcdc6: regulator-dcdc6 {
 411                         compatible = "ti,tps65218-dcdc6";
 412                         regulator-name = "v1_8bat";
 413                         regulator-min-microvolt = <1800000>;
 414                         regulator-max-microvolt = <1800000>;
 415                 };
 416
 417                 ldo1: regulator-ldo1 {
 418                         compatible = "ti,tps65218-ldo1";
 419                         regulator-min-microvolt = <1800000>;
 420                         regulator-max-microvolt = <1800000>;
 421                         regulator-boot-on;
 422                         regulator-always-on;
 423                 };
 424         };
 425
 426         at24@50 {
 427                 compatible = "at24,24c256";
 428                 pagesize = <64>;
 429                 reg = <0x50>;
 430         };
 431
 432         pixcir_ts@5c {
 433                 compatible = "pixcir,pixcir_tangoc";
 434                 pinctrl-names = "default";
 435                 pinctrl-0 = <&pixcir_ts_pins>;
 436                 reg = <0x5c>;
 437                 interrupt-parent = <&gpio1>;
 438                 interrupts = <17 0>;
 439
 440                 attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 441
 442                 touchscreen-size-x = <1024>;
 443                 touchscreen-size-y = <600>;
 444         };
 445 };
 446
 447 &i2c2 {
 448         pinctrl-names = "default";
 449         pinctrl-0 = <&i2c2_pins>;
 450         status = "okay";
 451 };
 452
 453 &gpio0 {
 454         status = "okay";
 455 };
 456
 457 &gpio1 {
 458         status = "okay";
 459 };
 460
 461 &gpio2 {
 462         status = "okay";
 463 };
 464
 465 &gpio3 {
 466         status = "okay";
 467 };
 468
 469 &elm {
 470         status = "okay";
 471 };
 472
 473 &gpmc {
 474         status = "okay";        /* Disable QSPI when enabling GPMC (NAND) */
 475         pinctrl-names = "default";
 476         pinctrl-0 = <&nand_flash_x8>;
 477         ranges = <0 0 0x08000000 0x1000000>;    /* CS0: 16MB for NAND */
 478         nand@0,0 {
 479                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 480                 ti,nand-ecc-opt = "bch16";
 481                 ti,elm-id = <&elm>;
 482                 nand-bus-width = <8>;
 483                 gpmc,device-width = <1>;
 484                 gpmc,sync-clk-ps = <0>;
 485                 gpmc,cs-on-ns = <0>;
 486                 gpmc,cs-rd-off-ns = <40>; /* tCEA + tCHZ + 1 */
 487                 gpmc,cs-wr-off-ns = <40>;
 488                 gpmc,adv-on-ns = <0>;  /* cs-on-ns */
 489                 gpmc,adv-rd-off-ns = <25>; /* min( tALH + tALS + 1) */
 490                 gpmc,adv-wr-off-ns = <25>; /* min( tALH + tALS + 1) */
 491                 gpmc,we-on-ns = <0>;   /* cs-on-ns */
 492                 gpmc,we-off-ns = <20>; /* we-on-time + tWP + 2 */
 493                 gpmc,oe-on-ns = <3>;  /* cs-on-ns + tRR + 2 */
 494                 gpmc,oe-off-ns = <30>; /* oe-on-ns + tRP + 2 */
 495                 gpmc,access-ns = <30>; /* tCEA + 4*/
 496                 gpmc,rd-cycle-ns = <40>;
 497                 gpmc,wr-cycle-ns = <40>;
 498                 gpmc,wait-pin = <0>;
 499                 gpmc,bus-turnaround-ns = <0>;
 500                 gpmc,cycle2cycle-delay-ns = <0>;
 501                 gpmc,clk-activation-ns = <0>;
 502                 gpmc,wait-monitoring-ns = <0>;
 503                 gpmc,wr-access-ns = <40>;
 504                 gpmc,wr-data-mux-bus-ns = <0>;
 505                 /* MTD partition table */
 506                 /* All SPL-* partitions are sized to minimal length
 507                  * which can be independently programmable. For
 508                  * NAND flash this is equal to size of erase-block */
 509                 #address-cells = <1>;
 510                 #size-cells = <1>;
 511                 partition@0 {
 512                         label = "NAND.SPL";
 513                         reg = <0x00000000 0x00040000>;
 514                 };
 515                 partition@1 {
 516                         label = "NAND.SPL.backup1";
 517                         reg = <0x00040000 0x00040000>;
 518                 };
 519                 partition@2 {
 520                         label = "NAND.SPL.backup2";
 521                         reg = <0x00080000 0x00040000>;
 522                 };
 523                 partition@3 {
 524                         label = "NAND.SPL.backup3";
 525                         reg = <0x000C0000 0x00040000>;
 526                 };
 527                 partition@4 {
 528                         label = "NAND.u-boot-spl-os";
 529                         reg = <0x00100000 0x00080000>;
 530                 };
 531                 partition@5 {
 532                         label = "NAND.u-boot";
 533                         reg = <0x00180000 0x00100000>;
 534                 };
 535                 partition@6 {
 536                         label = "NAND.u-boot-env";
 537                         reg = <0x00280000 0x00040000>;
 538                 };
 539                 partition@7 {
 540                         label = "NAND.u-boot-env.backup1";
 541                         reg = <0x002C0000 0x00040000>;
 542                 };
 543                 partition@8 {
 544                         label = "NAND.kernel";
 545                         reg = <0x00300000 0x00700000>;
 546                 };
 547                 partition@9 {
 548                         label = "NAND.file-system";
 549                         reg = <0x00a00000 0x1f600000>;
 550                 };
 551         };
 552 };
 553
 554 &epwmss0 {
 555         status = "okay";
 556 };
 557
 558 &tscadc {
 559         status = "okay";
 560
 561         adc {
 562                 ti,adc-channels = <0 1 2 3 4 5 6 7>;
 563         };
 564 };
 565
 566 &ecap0 {
 567                 status = "okay";
 568                 pinctrl-names = "default";
 569                 pinctrl-0 = <&ecap0_pins>;
 570 };
 571
 572 &spi0 {
 573         pinctrl-names = "default";
 574         pinctrl-0 = <&spi0_pins>;
 575         status = "okay";
 576 };
 577
 578 &spi1 {
 579         pinctrl-names = "default";
 580         pinctrl-0 = <&spi1_pins>;
 581         status = "okay";
 582 };
 583
 584 &usb2_phy1 {
 585         status = "okay";
 586 };
 587
 588 &usb1 {
 589         dr_mode = "peripheral";
 590         status = "okay";
 591 };
 592
 593 &usb2_phy2 {
 594         status = "okay";
 595 };
 596
 597 &usb2 {
 598         dr_mode = "host";
 599         status = "okay";
 600 };
 601
 602 &qspi {
 603         status = "disabled";    /* Disable GPMC (NAND) when enabling QSPI */
 604         pinctrl-names = "default";
 605         pinctrl-0 = <&qspi1_default>;
 606
 607         spi-max-frequency = <48000000>;
 608         m25p80@0 {
 609                 compatible = "mx66l51235l";
 610                 spi-max-frequency = <48000000>;
 611                 reg = <0>;
 612                 spi-cpol;
 613                 spi-cpha;
 614                 spi-tx-bus-width = <1>;
 615                 spi-rx-bus-width = <4>;
 616                 #address-cells = <1>;
 617                 #size-cells = <1>;
 618
 619                 /* MTD partition table.
 620                  * The ROM checks the first 512KiB
 621                  * for a valid file to boot(XIP).
 622                  */
 623                 partition@0 {
 624                         label = "QSPI.U_BOOT";
 625                         reg = <0x00000000 0x000080000>;
 626                 };
 627                 partition@1 {
 628                         label = "QSPI.U_BOOT.backup";
 629                         reg = <0x00080000 0x00080000>;
 630                 };
 631                 partition@2 {
 632                         label = "QSPI.U-BOOT-SPL_OS";
 633                         reg = <0x00100000 0x00010000>;
 634                 };
 635                 partition@3 {
 636                         label = "QSPI.U_BOOT_ENV";
 637                         reg = <0x00110000 0x00010000>;
 638                 };
 639                 partition@4 {
 640                         label = "QSPI.U-BOOT-ENV.backup";
 641                         reg = <0x00120000 0x00010000>;
 642                 };
 643                 partition@5 {
 644                         label = "QSPI.KERNEL";
 645                         reg = <0x00130000 0x0800000>;
 646                 };
 647                 partition@6 {
 648                         label = "QSPI.FILESYSTEM";
 649                         reg = <0x00930000 0x36D0000>;
 650                 };
 651         };
 652 };
 653
 654 &hdq {
 655         status = "okay";
 656         pinctrl-names = "default";
 657         pinctrl-0 = <&hdq_pins>;
 658 };
 659
 660 &dss {
 661         status = "ok";
 662
 663         pinctrl-names = "default";
 664         pinctrl-0 = <&dss_pins>;
 665
 666         port {
 667                 dpi_out: endpoint@0 {
 668                         remote-endpoint = <&lcd_in>;
 669                         data-lines = <24>;
 670                 };
 671         };
 672 };
 673
 674 &vpfe1 {
 675         status = "okay";
 676         pinctrl-names = "default", "sleep";
 677         pinctrl-0 = <&vpfe1_pins_default>;
 678         pinctrl-1 = <&vpfe1_pins_sleep>;
 679
 680         port {
 681                 vpfe1_ep: endpoint {
 682                         /* remote-endpoint = <&sensor>; add once we have it */
 683                         ti,am437x-vpfe-interface = <0>;
 684                         bus-width = <8>;
 685                         hsync-active = <0>;
 686                         vsync-active = <0>;
 687                 };
 688         };
 689 };