sys/gnu/dts/arm/armada-385-db-ap.dts

   1 /*
   2  * Device Tree file for Marvell Armada 385 Access Point Development board
   3  * (DB-88F6820-AP)
   4  *
   5  *  Copyright (C) 2014 Marvell
   6  *
   7  * Nadav Haklai <nadavh@marvell.com>
   8  *
   9  * This file is dual-licensed: you can use it either under the terms
  10  * of the GPL or the X11 license, at your option. Note that this dual
  11  * licensing only applies to this file, and not this project as a
  12  * whole.
  13  *
  14  *  a) This file is licensed under the terms of the GNU General Public
  15  *     License version 2.  This program is licensed "as is" without
  16  *     any warranty of any kind, whether express or implied.
  17  *
  18  * Or, alternatively,
  19  *
  20  *  b) Permission is hereby granted, free of charge, to any person
  21  *     obtaining a copy of this software and associated documentation
  22  *     files (the "Software"), to deal in the Software without
  23  *     restriction, including without limitation the rights to use,
  24  *     copy, modify, merge, publish, distribute, sublicense, and/or
  25  *     sell copies of the Software, and to permit persons to whom the
  26  *     Software is furnished to do so, subject to the following
  27  *     conditions:
  28  *
  29  *     The above copyright notice and this permission notice shall be
  30  *     included in all copies or substantial portions of the Software.
  31  *
  32  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  33  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  34  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  35  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  36  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  37  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  38  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  39  *     OTHER DEALINGS IN THE SOFTWARE.
  40  */
  41
  42 /dts-v1/;
  43 #include "armada-385.dtsi"
  44
  45 #include <dt-bindings/gpio/gpio.h>
  46
  47 / {
  48         model = "Marvell Armada 385 Access Point Development Board";
  49         compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
  50
  51         chosen {
  52                 bootargs = "console=ttyS0,115200";
  53                 stdout-path = &uart1;
  54         };
  55
  56         memory {
  57                 device_type = "memory";
  58                 reg = <0x00000000 0x80000000>; /* 2GB */
  59         };
  60
  61         soc {
  62                 ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
  63                           MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
  64
  65                 internal-regs {
  66                         spi1: spi@10680 {
  67                                 pinctrl-names = "default";
  68                                 pinctrl-0 = <&spi1_pins>;
  69                                 status = "okay";
  70
  71                                 spi-flash@0 {
  72                                         #address-cells = <1>;
  73                                         #size-cells = <1>;
  74                                         compatible = "st,m25p128";
  75                                         reg = <0>; /* Chip select 0 */
  76                                         spi-max-frequency = <54000000>;
  77                                 };
  78                         };
  79
  80                         i2c0: i2c@11000 {
  81                                 pinctrl-names = "default";
  82                                 pinctrl-0 = <&i2c0_pins>;
  83                                 status = "okay";
  84
  85                                 /*
  86                                  * This bus is wired to two EEPROM
  87                                  * sockets, one of which holding the
  88                                  * board ID used by the bootloader.
  89                                  * Erasing this EEPROM's content will
  90                                  * brick the board.
  91                                  * Use this bus with caution.
  92                                  */
  93                         };
  94
  95                         mdio@72004 {
  96                                 pinctrl-names = "default";
  97                                 pinctrl-0 = <&mdio_pins>;
  98
  99                                 phy0: ethernet-phy@1 {
 100                                         reg = <1>;
 101                                 };
 102
 103                                 phy1: ethernet-phy@4 {
 104                                         reg = <4>;
 105                                 };
 106
 107                                 phy2: ethernet-phy@6 {
 108                                         reg = <6>;
 109                                 };
 110                         };
 111
 112                         /* UART0 is exposed through the JP8 connector */
 113                         uart0: serial@12000 {
 114                                 pinctrl-names = "default";
 115                                 pinctrl-0 = <&uart0_pins>;
 116                                 status = "okay";
 117                         };
 118
 119                         /*
 120                          * UART1 is exposed through a FTDI chip
 121                          * wired to the mini-USB connector
 122                          */
 123                         uart1: serial@12100 {
 124                                 pinctrl-names = "default";
 125                                 pinctrl-0 = <&uart1_pins>;
 126                                 status = "okay";
 127                         };
 128
 129                         ethernet@30000 {
 130                                 status = "okay";
 131                                 phy = <&phy2>;
 132                                 phy-mode = "sgmii";
 133                         };
 134
 135                         ethernet@34000 {
 136                                 status = "okay";
 137                                 phy = <&phy1>;
 138                                 phy-mode = "sgmii";
 139                         };
 140
 141                         ethernet@70000 {
 142                                 pinctrl-names = "default";
 143
 144                                 /*
 145                                  * The Reference Clock 0 is used to
 146                                  * provide a clock to the PHY
 147                                  */
 148                                 pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
 149                                 status = "okay";
 150                                 phy = <&phy0>;
 151                                 phy-mode = "rgmii-id";
 152                         };
 153                 };
 154
 155                 pcie-controller {
 156                         status = "okay";
 157
 158                         /*
 159                          * The three PCIe units are accessible through
 160                          * standard mini-PCIe slots on the board.
 161                          */
 162                         pcie@1,0 {
 163                                 /* Port 0, Lane 0 */
 164                                 status = "okay";
 165                         };
 166
 167                         pcie@2,0 {
 168                                 /* Port 1, Lane 0 */
 169                                 status = "okay";
 170                         };
 171
 172                         pcie@3,0 {
 173                                 /* Port 2, Lane 0 */
 174                                 status = "okay";
 175                         };
 176                 };
 177         };
 178 };