sys/gnu/dts/arm/imx6sl.dtsi

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  *
   8  */
   9
  10 #include <dt-bindings/interrupt-controller/irq.h>
  11 #include "skeleton.dtsi"
  12 #include "imx6sl-pinfunc.h"
  13 #include <dt-bindings/clock/imx6sl-clock.h>
  14
  15 / {
  16         aliases {
  17                 ethernet0 = &fec;
  18                 gpio0 = &gpio1;
  19                 gpio1 = &gpio2;
  20                 gpio2 = &gpio3;
  21                 gpio3 = &gpio4;
  22                 gpio4 = &gpio5;
  23                 serial0 = &uart1;
  24                 serial1 = &uart2;
  25                 serial2 = &uart3;
  26                 serial3 = &uart4;
  27                 serial4 = &uart5;
  28                 spi0 = &ecspi1;
  29                 spi1 = &ecspi2;
  30                 spi2 = &ecspi3;
  31                 spi3 = &ecspi4;
  32                 usbphy0 = &usbphy1;
  33                 usbphy1 = &usbphy2;
  34         };
  35
  36         cpus {
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39
  40                 cpu@0 {
  41                         compatible = "arm,cortex-a9";
  42                         device_type = "cpu";
  43                         reg = <0x0>;
  44                         next-level-cache = <&L2>;
  45                         operating-points = <
  46                                 /* kHz    uV */
  47                                 996000  1275000
  48                                 792000  1175000
  49                                 396000  975000
  50                         >;
  51                         fsl,soc-operating-points = <
  52                                 /* ARM kHz      SOC-PU uV */
  53                                 996000          1225000
  54                                 792000          1175000
  55                                 396000          1175000
  56                         >;
  57                         clock-latency = <61036>; /* two CLK32 periods */
  58                         clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
  59                                         <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>,
  60                                         <&clks IMX6SL_CLK_PLL1_SYS>;
  61                         clock-names = "arm", "pll2_pfd2_396m", "step",
  62                                       "pll1_sw", "pll1_sys";
  63                         arm-supply = <&reg_arm>;
  64                         pu-supply = <&reg_pu>;
  65                         soc-supply = <&reg_soc>;
  66                 };
  67         };
  68
  69         intc: interrupt-controller@00a01000 {
  70                 compatible = "arm,cortex-a9-gic";
  71                 #interrupt-cells = <3>;
  72                 interrupt-controller;
  73                 reg = <0x00a01000 0x1000>,
  74                       <0x00a00100 0x100>;
  75         };
  76
  77         clocks {
  78                 #address-cells = <1>;
  79                 #size-cells = <0>;
  80
  81                 ckil {
  82                         compatible = "fixed-clock";
  83                         #clock-cells = <0>;
  84                         clock-frequency = <32768>;
  85                 };
  86
  87                 osc {
  88                         compatible = "fixed-clock";
  89                         #clock-cells = <0>;
  90                         clock-frequency = <24000000>;
  91                 };
  92         };
  93
  94         soc {
  95                 #address-cells = <1>;
  96                 #size-cells = <1>;
  97                 compatible = "simple-bus";
  98                 interrupt-parent = <&intc>;
  99                 ranges;
 100
 101                 ocram: sram@00900000 {
 102                         compatible = "mmio-sram";
 103                         reg = <0x00900000 0x20000>;
 104                         clocks = <&clks IMX6SL_CLK_OCRAM>;
 105                 };
 106
 107                 L2: l2-cache@00a02000 {
 108                         compatible = "arm,pl310-cache";
 109                         reg = <0x00a02000 0x1000>;
 110                         interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 111                         cache-unified;
 112                         cache-level = <2>;
 113                         arm,tag-latency = <4 2 3>;
 114                         arm,data-latency = <4 2 3>;
 115                 };
 116
 117                 pmu {
 118                         compatible = "arm,cortex-a9-pmu";
 119                         interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 120                 };
 121
 122                 aips1: aips-bus@02000000 {
 123                         compatible = "fsl,aips-bus", "simple-bus";
 124                         #address-cells = <1>;
 125                         #size-cells = <1>;
 126                         reg = <0x02000000 0x100000>;
 127                         ranges;
 128
 129                         spba: spba-bus@02000000 {
 130                                 compatible = "fsl,spba-bus", "simple-bus";
 131                                 #address-cells = <1>;
 132                                 #size-cells = <1>;
 133                                 reg = <0x02000000 0x40000>;
 134                                 ranges;
 135
 136                                 spdif: spdif@02004000 {
 137                                         reg = <0x02004000 0x4000>;
 138                                         interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
 139                                 };
 140
 141                                 ecspi1: ecspi@02008000 {
 142                                         #address-cells = <1>;
 143                                         #size-cells = <0>;
 144                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 145                                         reg = <0x02008000 0x4000>;
 146                                         interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 147                                         clocks = <&clks IMX6SL_CLK_ECSPI1>,
 148                                                  <&clks IMX6SL_CLK_ECSPI1>;
 149                                         clock-names = "ipg", "per";
 150                                         status = "disabled";
 151                                 };
 152
 153                                 ecspi2: ecspi@0200c000 {
 154                                         #address-cells = <1>;
 155                                         #size-cells = <0>;
 156                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 157                                         reg = <0x0200c000 0x4000>;
 158                                         interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
 159                                         clocks = <&clks IMX6SL_CLK_ECSPI2>,
 160                                                  <&clks IMX6SL_CLK_ECSPI2>;
 161                                         clock-names = "ipg", "per";
 162                                         status = "disabled";
 163                                 };
 164
 165                                 ecspi3: ecspi@02010000 {
 166                                         #address-cells = <1>;
 167                                         #size-cells = <0>;
 168                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 169                                         reg = <0x02010000 0x4000>;
 170                                         interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
 171                                         clocks = <&clks IMX6SL_CLK_ECSPI3>,
 172                                                  <&clks IMX6SL_CLK_ECSPI3>;
 173                                         clock-names = "ipg", "per";
 174                                         status = "disabled";
 175                                 };
 176
 177                                 ecspi4: ecspi@02014000 {
 178                                         #address-cells = <1>;
 179                                         #size-cells = <0>;
 180                                         compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
 181                                         reg = <0x02014000 0x4000>;
 182                                         interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
 183                                         clocks = <&clks IMX6SL_CLK_ECSPI4>,
 184                                                  <&clks IMX6SL_CLK_ECSPI4>;
 185                                         clock-names = "ipg", "per";
 186                                         status = "disabled";
 187                                 };
 188
 189                                 uart5: serial@02018000 {
 190                                         compatible = "fsl,imx6sl-uart",
 191                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 192                                         reg = <0x02018000 0x4000>;
 193                                         interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 194                                         clocks = <&clks IMX6SL_CLK_UART>,
 195                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 196                                         clock-names = "ipg", "per";
 197                                         dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
 198                                         dma-names = "rx", "tx";
 199                                         status = "disabled";
 200                                 };
 201
 202                                 uart1: serial@02020000 {
 203                                         compatible = "fsl,imx6sl-uart",
 204                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 205                                         reg = <0x02020000 0x4000>;
 206                                         interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
 207                                         clocks = <&clks IMX6SL_CLK_UART>,
 208                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 209                                         clock-names = "ipg", "per";
 210                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 211                                         dma-names = "rx", "tx";
 212                                         status = "disabled";
 213                                 };
 214
 215                                 uart2: serial@02024000 {
 216                                         compatible = "fsl,imx6sl-uart",
 217                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 218                                         reg = <0x02024000 0x4000>;
 219                                         interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
 220                                         clocks = <&clks IMX6SL_CLK_UART>,
 221                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 222                                         clock-names = "ipg", "per";
 223                                         dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
 224                                         dma-names = "rx", "tx";
 225                                         status = "disabled";
 226                                 };
 227
 228                                 ssi1: ssi@02028000 {
 229                                         #sound-dai-cells = <0>;
 230                                         compatible = "fsl,imx6sl-ssi",
 231                                                         "fsl,imx51-ssi";
 232                                         reg = <0x02028000 0x4000>;
 233                                         interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
 234                                         clocks = <&clks IMX6SL_CLK_SSI1_IPG>,
 235                                                  <&clks IMX6SL_CLK_SSI1>;
 236                                         clock-names = "ipg", "baud";
 237                                         dmas = <&sdma 37 1 0>,
 238                                                <&sdma 38 1 0>;
 239                                         dma-names = "rx", "tx";
 240                                         fsl,fifo-depth = <15>;
 241                                         status = "disabled";
 242                                 };
 243
 244                                 ssi2: ssi@0202c000 {
 245                                         #sound-dai-cells = <0>;
 246                                         compatible = "fsl,imx6sl-ssi",
 247                                                         "fsl,imx51-ssi";
 248                                         reg = <0x0202c000 0x4000>;
 249                                         interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
 250                                         clocks = <&clks IMX6SL_CLK_SSI2_IPG>,
 251                                                  <&clks IMX6SL_CLK_SSI2>;
 252                                         clock-names = "ipg", "baud";
 253                                         dmas = <&sdma 41 1 0>,
 254                                                <&sdma 42 1 0>;
 255                                         dma-names = "rx", "tx";
 256                                         fsl,fifo-depth = <15>;
 257                                         status = "disabled";
 258                                 };
 259
 260                                 ssi3: ssi@02030000 {
 261                                         #sound-dai-cells = <0>;
 262                                         compatible = "fsl,imx6sl-ssi",
 263                                                         "fsl,imx51-ssi";
 264                                         reg = <0x02030000 0x4000>;
 265                                         interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
 266                                         clocks = <&clks IMX6SL_CLK_SSI3_IPG>,
 267                                                  <&clks IMX6SL_CLK_SSI3>;
 268                                         clock-names = "ipg", "baud";
 269                                         dmas = <&sdma 45 1 0>,
 270                                                <&sdma 46 1 0>;
 271                                         dma-names = "rx", "tx";
 272                                         fsl,fifo-depth = <15>;
 273                                         status = "disabled";
 274                                 };
 275
 276                                 uart3: serial@02034000 {
 277                                         compatible = "fsl,imx6sl-uart",
 278                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 279                                         reg = <0x02034000 0x4000>;
 280                                         interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
 281                                         clocks = <&clks IMX6SL_CLK_UART>,
 282                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 283                                         clock-names = "ipg", "per";
 284                                         dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
 285                                         dma-names = "rx", "tx";
 286                                         status = "disabled";
 287                                 };
 288
 289                                 uart4: serial@02038000 {
 290                                         compatible = "fsl,imx6sl-uart",
 291                                                    "fsl,imx6q-uart", "fsl,imx21-uart";
 292                                         reg = <0x02038000 0x4000>;
 293                                         interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 294                                         clocks = <&clks IMX6SL_CLK_UART>,
 295                                                  <&clks IMX6SL_CLK_UART_SERIAL>;
 296                                         clock-names = "ipg", "per";
 297                                         dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
 298                                         dma-names = "rx", "tx";
 299                                         status = "disabled";
 300                                 };
 301                         };
 302
 303                         pwm1: pwm@02080000 {
 304                                 #pwm-cells = <2>;
 305                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 306                                 reg = <0x02080000 0x4000>;
 307                                 interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
 308                                 clocks = <&clks IMX6SL_CLK_PWM1>,
 309                                          <&clks IMX6SL_CLK_PWM1>;
 310                                 clock-names = "ipg", "per";
 311                         };
 312
 313                         pwm2: pwm@02084000 {
 314                                 #pwm-cells = <2>;
 315                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 316                                 reg = <0x02084000 0x4000>;
 317                                 interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
 318                                 clocks = <&clks IMX6SL_CLK_PWM2>,
 319                                          <&clks IMX6SL_CLK_PWM2>;
 320                                 clock-names = "ipg", "per";
 321                         };
 322
 323                         pwm3: pwm@02088000 {
 324                                 #pwm-cells = <2>;
 325                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 326                                 reg = <0x02088000 0x4000>;
 327                                 interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
 328                                 clocks = <&clks IMX6SL_CLK_PWM3>,
 329                                          <&clks IMX6SL_CLK_PWM3>;
 330                                 clock-names = "ipg", "per";
 331                         };
 332
 333                         pwm4: pwm@0208c000 {
 334                                 #pwm-cells = <2>;
 335                                 compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 336                                 reg = <0x0208c000 0x4000>;
 337                                 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
 338                                 clocks = <&clks IMX6SL_CLK_PWM4>,
 339                                          <&clks IMX6SL_CLK_PWM4>;
 340                                 clock-names = "ipg", "per";
 341                         };
 342
 343                         gpt: gpt@02098000 {
 344                                 compatible = "fsl,imx6sl-gpt";
 345                                 reg = <0x02098000 0x4000>;
 346                                 interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
 347                                 clocks = <&clks IMX6SL_CLK_GPT>,
 348                                          <&clks IMX6SL_CLK_GPT_SERIAL>;
 349                                 clock-names = "ipg", "per";
 350                         };
 351
 352                         gpio1: gpio@0209c000 {
 353                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 354                                 reg = <0x0209c000 0x4000>;
 355                                 interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>,
 356                                              <0 67 IRQ_TYPE_LEVEL_HIGH>;
 357                                 gpio-controller;
 358                                 #gpio-cells = <2>;
 359                                 interrupt-controller;
 360                                 #interrupt-cells = <2>;
 361                         };
 362
 363                         gpio2: gpio@020a0000 {
 364                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 365                                 reg = <0x020a0000 0x4000>;
 366                                 interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>,
 367                                              <0 69 IRQ_TYPE_LEVEL_HIGH>;
 368                                 gpio-controller;
 369                                 #gpio-cells = <2>;
 370                                 interrupt-controller;
 371                                 #interrupt-cells = <2>;
 372                         };
 373
 374                         gpio3: gpio@020a4000 {
 375                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 376                                 reg = <0x020a4000 0x4000>;
 377                                 interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>,
 378                                              <0 71 IRQ_TYPE_LEVEL_HIGH>;
 379                                 gpio-controller;
 380                                 #gpio-cells = <2>;
 381                                 interrupt-controller;
 382                                 #interrupt-cells = <2>;
 383                         };
 384
 385                         gpio4: gpio@020a8000 {
 386                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 387                                 reg = <0x020a8000 0x4000>;
 388                                 interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>,
 389                                              <0 73 IRQ_TYPE_LEVEL_HIGH>;
 390                                 gpio-controller;
 391                                 #gpio-cells = <2>;
 392                                 interrupt-controller;
 393                                 #interrupt-cells = <2>;
 394                         };
 395
 396                         gpio5: gpio@020ac000 {
 397                                 compatible = "fsl,imx6sl-gpio", "fsl,imx35-gpio";
 398                                 reg = <0x020ac000 0x4000>;
 399                                 interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>,
 400                                              <0 75 IRQ_TYPE_LEVEL_HIGH>;
 401                                 gpio-controller;
 402                                 #gpio-cells = <2>;
 403                                 interrupt-controller;
 404                                 #interrupt-cells = <2>;
 405                         };
 406
 407                         kpp: kpp@020b8000 {
 408                                 compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp";
 409                                 reg = <0x020b8000 0x4000>;
 410                                 interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
 411                                 clocks = <&clks IMX6SL_CLK_DUMMY>;
 412                                 status = "disabled";
 413                         };
 414
 415                         wdog1: wdog@020bc000 {
 416                                 compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 417                                 reg = <0x020bc000 0x4000>;
 418                                 interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
 419                                 clocks = <&clks IMX6SL_CLK_DUMMY>;
 420                         };
 421
 422                         wdog2: wdog@020c0000 {
 423                                 compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt";
 424                                 reg = <0x020c0000 0x4000>;
 425                                 interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
 426                                 clocks = <&clks IMX6SL_CLK_DUMMY>;
 427                                 status = "disabled";
 428                         };
 429
 430                         clks: ccm@020c4000 {
 431                                 compatible = "fsl,imx6sl-ccm";
 432                                 reg = <0x020c4000 0x4000>;
 433                                 interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
 434                                              <0 88 IRQ_TYPE_LEVEL_HIGH>;
 435                                 #clock-cells = <1>;
 436                         };
 437
 438                         anatop: anatop@020c8000 {
 439                                 compatible = "fsl,imx6sl-anatop",
 440                                              "fsl,imx6q-anatop",
 441                                              "syscon", "simple-bus";
 442                                 reg = <0x020c8000 0x1000>;
 443                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
 444                                              <0 54 IRQ_TYPE_LEVEL_HIGH>,
 445                                              <0 127 IRQ_TYPE_LEVEL_HIGH>;
 446
 447                                 regulator-1p1@110 {
 448                                         compatible = "fsl,anatop-regulator";
 449                                         regulator-name = "vdd1p1";
 450                                         regulator-min-microvolt = <800000>;
 451                                         regulator-max-microvolt = <1375000>;
 452                                         regulator-always-on;
 453                                         anatop-reg-offset = <0x110>;
 454                                         anatop-vol-bit-shift = <8>;
 455                                         anatop-vol-bit-width = <5>;
 456                                         anatop-min-bit-val = <4>;
 457                                         anatop-min-voltage = <800000>;
 458                                         anatop-max-voltage = <1375000>;
 459                                 };
 460
 461                                 regulator-3p0@120 {
 462                                         compatible = "fsl,anatop-regulator";
 463                                         regulator-name = "vdd3p0";
 464                                         regulator-min-microvolt = <2800000>;
 465                                         regulator-max-microvolt = <3150000>;
 466                                         regulator-always-on;
 467                                         anatop-reg-offset = <0x120>;
 468                                         anatop-vol-bit-shift = <8>;
 469                                         anatop-vol-bit-width = <5>;
 470                                         anatop-min-bit-val = <0>;
 471                                         anatop-min-voltage = <2625000>;
 472                                         anatop-max-voltage = <3400000>;
 473                                 };
 474
 475                                 regulator-2p5@130 {
 476                                         compatible = "fsl,anatop-regulator";
 477                                         regulator-name = "vdd2p5";
 478                                         regulator-min-microvolt = <2100000>;
 479                                         regulator-max-microvolt = <2850000>;
 480                                         regulator-always-on;
 481                                         anatop-reg-offset = <0x130>;
 482                                         anatop-vol-bit-shift = <8>;
 483                                         anatop-vol-bit-width = <5>;
 484                                         anatop-min-bit-val = <0>;
 485                                         anatop-min-voltage = <2100000>;
 486                                         anatop-max-voltage = <2850000>;
 487                                 };
 488
 489                                 reg_arm: regulator-vddcore@140 {
 490                                         compatible = "fsl,anatop-regulator";
 491                                         regulator-name = "vddarm";
 492                                         regulator-min-microvolt = <725000>;
 493                                         regulator-max-microvolt = <1450000>;
 494                                         regulator-always-on;
 495                                         anatop-reg-offset = <0x140>;
 496                                         anatop-vol-bit-shift = <0>;
 497                                         anatop-vol-bit-width = <5>;
 498                                         anatop-delay-reg-offset = <0x170>;
 499                                         anatop-delay-bit-shift = <24>;
 500                                         anatop-delay-bit-width = <2>;
 501                                         anatop-min-bit-val = <1>;
 502                                         anatop-min-voltage = <725000>;
 503                                         anatop-max-voltage = <1450000>;
 504                                 };
 505
 506                                 reg_pu: regulator-vddpu@140 {
 507                                         compatible = "fsl,anatop-regulator";
 508                                         regulator-name = "vddpu";
 509                                         regulator-min-microvolt = <725000>;
 510                                         regulator-max-microvolt = <1450000>;
 511                                         regulator-always-on;
 512                                         anatop-reg-offset = <0x140>;
 513                                         anatop-vol-bit-shift = <9>;
 514                                         anatop-vol-bit-width = <5>;
 515                                         anatop-delay-reg-offset = <0x170>;
 516                                         anatop-delay-bit-shift = <26>;
 517                                         anatop-delay-bit-width = <2>;
 518                                         anatop-min-bit-val = <1>;
 519                                         anatop-min-voltage = <725000>;
 520                                         anatop-max-voltage = <1450000>;
 521                                 };
 522
 523                                 reg_soc: regulator-vddsoc@140 {
 524                                         compatible = "fsl,anatop-regulator";
 525                                         regulator-name = "vddsoc";
 526                                         regulator-min-microvolt = <725000>;
 527                                         regulator-max-microvolt = <1450000>;
 528                                         regulator-always-on;
 529                                         anatop-reg-offset = <0x140>;
 530                                         anatop-vol-bit-shift = <18>;
 531                                         anatop-vol-bit-width = <5>;
 532                                         anatop-delay-reg-offset = <0x170>;
 533                                         anatop-delay-bit-shift = <28>;
 534                                         anatop-delay-bit-width = <2>;
 535                                         anatop-min-bit-val = <1>;
 536                                         anatop-min-voltage = <725000>;
 537                                         anatop-max-voltage = <1450000>;
 538                                 };
 539                         };
 540
 541                         tempmon: tempmon {
 542                                 compatible = "fsl,imx6q-tempmon";
 543                                 interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 544                                 fsl,tempmon = <&anatop>;
 545                                 fsl,tempmon-data = <&ocotp>;
 546                                 clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
 547                         };
 548
 549                         usbphy1: usbphy@020c9000 {
 550                                 compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 551                                 reg = <0x020c9000 0x1000>;
 552                                 interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
 553                                 clocks = <&clks IMX6SL_CLK_USBPHY1>;
 554                                 fsl,anatop = <&anatop>;
 555                         };
 556
 557                         usbphy2: usbphy@020ca000 {
 558                                 compatible = "fsl,imx6sl-usbphy", "fsl,imx23-usbphy";
 559                                 reg = <0x020ca000 0x1000>;
 560                                 interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
 561                                 clocks = <&clks IMX6SL_CLK_USBPHY2>;
 562                                 fsl,anatop = <&anatop>;
 563                         };
 564
 565                         snvs@020cc000 {
 566                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 567                                 #address-cells = <1>;
 568                                 #size-cells = <1>;
 569                                 ranges = <0 0x020cc000 0x4000>;
 570
 571                                 snvs-rtc-lp@34 {
 572                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 573                                         reg = <0x34 0x58>;
 574                                         interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
 575                                                      <0 20 IRQ_TYPE_LEVEL_HIGH>;
 576                                 };
 577
 578                                 snvs_poweroff: snvs-poweroff@38 {
 579                                         compatible = "fsl,sec-v4.0-poweroff";
 580                                         reg = <0x38 0x4>;
 581                                         status = "disabled";
 582                                 };
 583                         };
 584
 585                         epit1: epit@020d0000 {
 586                                 reg = <0x020d0000 0x4000>;
 587                                 interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
 588                         };
 589
 590                         epit2: epit@020d4000 {
 591                                 reg = <0x020d4000 0x4000>;
 592                                 interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 593                         };
 594
 595                         src: src@020d8000 {
 596                                 compatible = "fsl,imx6sl-src", "fsl,imx51-src";
 597                                 reg = <0x020d8000 0x4000>;
 598                                 interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
 599                                              <0 96 IRQ_TYPE_LEVEL_HIGH>;
 600                                 #reset-cells = <1>;
 601                         };
 602
 603                         gpc: gpc@020dc000 {
 604                                 compatible = "fsl,imx6sl-gpc", "fsl,imx6q-gpc";
 605                                 reg = <0x020dc000 0x4000>;
 606                                 interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 607                         };
 608
 609                         gpr: iomuxc-gpr@020e0000 {
 610                                 compatible = "fsl,imx6sl-iomuxc-gpr",
 611                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 612                                 reg = <0x020e0000 0x38>;
 613                         };
 614
 615                         iomuxc: iomuxc@020e0000 {
 616                                 compatible = "fsl,imx6sl-iomuxc";
 617                                 reg = <0x020e0000 0x4000>;
 618                         };
 619
 620                         csi: csi@020e4000 {
 621                                 reg = <0x020e4000 0x4000>;
 622                                 interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
 623                         };
 624
 625                         spdc: spdc@020e8000 {
 626                                 reg = <0x020e8000 0x4000>;
 627                                 interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
 628                         };
 629
 630                         sdma: sdma@020ec000 {
 631                                 compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma";
 632                                 reg = <0x020ec000 0x4000>;
 633                                 interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
 634                                 clocks = <&clks IMX6SL_CLK_SDMA>,
 635                                          <&clks IMX6SL_CLK_SDMA>;
 636                                 clock-names = "ipg", "ahb";
 637                                 #dma-cells = <3>;
 638                                 /* imx6sl reuses imx6q sdma firmware */
 639                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 640                         };
 641
 642                         pxp: pxp@020f0000 {
 643                                 reg = <0x020f0000 0x4000>;
 644                                 interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 645                         };
 646
 647                         epdc: epdc@020f4000 {
 648                                 reg = <0x020f4000 0x4000>;
 649                                 interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 650                         };
 651
 652                         lcdif: lcdif@020f8000 {
 653                                 compatible = "fsl,imx6sl-lcdif", "fsl,imx28-lcdif";
 654                                 reg = <0x020f8000 0x4000>;
 655                                 interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
 656                                 clocks = <&clks IMX6SL_CLK_LCDIF_PIX>,
 657                                          <&clks IMX6SL_CLK_LCDIF_AXI>,
 658                                          <&clks IMX6SL_CLK_DUMMY>;
 659                                 clock-names = "pix", "axi", "disp_axi";
 660                                 status = "disabled";
 661                         };
 662
 663                         dcp: dcp@020fc000 {
 664                                 reg = <0x020fc000 0x4000>;
 665                                 interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>;
 666                         };
 667                 };
 668
 669                 aips2: aips-bus@02100000 {
 670                         compatible = "fsl,aips-bus", "simple-bus";
 671                         #address-cells = <1>;
 672                         #size-cells = <1>;
 673                         reg = <0x02100000 0x100000>;
 674                         ranges;
 675
 676                         usbotg1: usb@02184000 {
 677                                 compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 678                                 reg = <0x02184000 0x200>;
 679                                 interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
 680                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 681                                 fsl,usbphy = <&usbphy1>;
 682                                 fsl,usbmisc = <&usbmisc 0>;
 683                                 status = "disabled";
 684                         };
 685
 686                         usbotg2: usb@02184200 {
 687                                 compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 688                                 reg = <0x02184200 0x200>;
 689                                 interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
 690                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 691                                 fsl,usbphy = <&usbphy2>;
 692                                 fsl,usbmisc = <&usbmisc 1>;
 693                                 status = "disabled";
 694                         };
 695
 696                         usbh: usb@02184400 {
 697                                 compatible = "fsl,imx6sl-usb", "fsl,imx27-usb";
 698                                 reg = <0x02184400 0x200>;
 699                                 interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
 700                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 701                                 fsl,usbmisc = <&usbmisc 2>;
 702                                 status = "disabled";
 703                         };
 704
 705                         usbmisc: usbmisc@02184800 {
 706                                 #index-cells = <1>;
 707                                 compatible = "fsl,imx6sl-usbmisc", "fsl,imx6q-usbmisc";
 708                                 reg = <0x02184800 0x200>;
 709                                 clocks = <&clks IMX6SL_CLK_USBOH3>;
 710                         };
 711
 712                         fec: ethernet@02188000 {
 713                                 compatible = "fsl,imx6sl-fec", "fsl,imx25-fec";
 714                                 reg = <0x02188000 0x4000>;
 715                                 interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
 716                                 clocks = <&clks IMX6SL_CLK_ENET>,
 717                                          <&clks IMX6SL_CLK_ENET_REF>;
 718                                 clock-names = "ipg", "ahb";
 719                                 status = "disabled";
 720                         };
 721
 722                         usdhc1: usdhc@02190000 {
 723                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 724                                 reg = <0x02190000 0x4000>;
 725                                 interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 726                                 clocks = <&clks IMX6SL_CLK_USDHC1>,
 727                                          <&clks IMX6SL_CLK_USDHC1>,
 728                                          <&clks IMX6SL_CLK_USDHC1>;
 729                                 clock-names = "ipg", "ahb", "per";
 730                                 bus-width = <4>;
 731                                 status = "disabled";
 732                         };
 733
 734                         usdhc2: usdhc@02194000 {
 735                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 736                                 reg = <0x02194000 0x4000>;
 737                                 interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 738                                 clocks = <&clks IMX6SL_CLK_USDHC2>,
 739                                          <&clks IMX6SL_CLK_USDHC2>,
 740                                          <&clks IMX6SL_CLK_USDHC2>;
 741                                 clock-names = "ipg", "ahb", "per";
 742                                 bus-width = <4>;
 743                                 status = "disabled";
 744                         };
 745
 746                         usdhc3: usdhc@02198000 {
 747                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 748                                 reg = <0x02198000 0x4000>;
 749                                 interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 750                                 clocks = <&clks IMX6SL_CLK_USDHC3>,
 751                                          <&clks IMX6SL_CLK_USDHC3>,
 752                                          <&clks IMX6SL_CLK_USDHC3>;
 753                                 clock-names = "ipg", "ahb", "per";
 754                                 bus-width = <4>;
 755                                 status = "disabled";
 756                         };
 757
 758                         usdhc4: usdhc@0219c000 {
 759                                 compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 760                                 reg = <0x0219c000 0x4000>;
 761                                 interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 762                                 clocks = <&clks IMX6SL_CLK_USDHC4>,
 763                                          <&clks IMX6SL_CLK_USDHC4>,
 764                                          <&clks IMX6SL_CLK_USDHC4>;
 765                                 clock-names = "ipg", "ahb", "per";
 766                                 bus-width = <4>;
 767                                 status = "disabled";
 768                         };
 769
 770                         i2c1: i2c@021a0000 {
 771                                 #address-cells = <1>;
 772                                 #size-cells = <0>;
 773                                 compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 774                                 reg = <0x021a0000 0x4000>;
 775                                 interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
 776                                 clocks = <&clks IMX6SL_CLK_I2C1>;
 777                                 status = "disabled";
 778                         };
 779
 780                         i2c2: i2c@021a4000 {
 781                                 #address-cells = <1>;
 782                                 #size-cells = <0>;
 783                                 compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 784                                 reg = <0x021a4000 0x4000>;
 785                                 interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
 786                                 clocks = <&clks IMX6SL_CLK_I2C2>;
 787                                 status = "disabled";
 788                         };
 789
 790                         i2c3: i2c@021a8000 {
 791                                 #address-cells = <1>;
 792                                 #size-cells = <0>;
 793                                 compatible = "fsl,imx6sl-i2c", "fsl,imx21-i2c";
 794                                 reg = <0x021a8000 0x4000>;
 795                                 interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
 796                                 clocks = <&clks IMX6SL_CLK_I2C3>;
 797                                 status = "disabled";
 798                         };
 799
 800                         mmdc: mmdc@021b0000 {
 801                                 compatible = "fsl,imx6sl-mmdc", "fsl,imx6q-mmdc";
 802                                 reg = <0x021b0000 0x4000>;
 803                         };
 804
 805                         rngb: rngb@021b4000 {
 806                                 reg = <0x021b4000 0x4000>;
 807                                 interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
 808                         };
 809
 810                         weim: weim@021b8000 {
 811                                 reg = <0x021b8000 0x4000>;
 812                                 interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
 813                         };
 814
 815                         ocotp: ocotp@021bc000 {
 816                                 compatible = "fsl,imx6sl-ocotp", "syscon";
 817                                 reg = <0x021bc000 0x4000>;
 818                         };
 819
 820                         audmux: audmux@021d8000 {
 821                                 compatible = "fsl,imx6sl-audmux", "fsl,imx31-audmux";
 822                                 reg = <0x021d8000 0x4000>;
 823                                 status = "disabled";
 824                         };
 825                 };
 826         };
 827 };