sys/gnu/dts/arm/imx6sx.dtsi

   1 /*
   2  * Copyright 2014 Freescale Semiconductor, Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 #include <dt-bindings/clock/imx6sx-clock.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 #include "imx6sx-pinfunc.h"
  13 #include "skeleton.dtsi"
  14
  15 / {
  16         aliases {
  17                 can0 = &flexcan1;
  18                 can1 = &flexcan2;
  19                 ethernet0 = &fec1;
  20                 ethernet1 = &fec2;
  21                 gpio0 = &gpio1;
  22                 gpio1 = &gpio2;
  23                 gpio2 = &gpio3;
  24                 gpio3 = &gpio4;
  25                 gpio4 = &gpio5;
  26                 gpio5 = &gpio6;
  27                 gpio6 = &gpio7;
  28                 i2c0 = &i2c1;
  29                 i2c1 = &i2c2;
  30                 i2c2 = &i2c3;
  31                 i2c3 = &i2c4;
  32                 mmc0 = &usdhc1;
  33                 mmc1 = &usdhc2;
  34                 mmc2 = &usdhc3;
  35                 mmc3 = &usdhc4;
  36                 serial0 = &uart1;
  37                 serial1 = &uart2;
  38                 serial2 = &uart3;
  39                 serial3 = &uart4;
  40                 serial4 = &uart5;
  41                 serial5 = &uart6;
  42                 spi0 = &ecspi1;
  43                 spi1 = &ecspi2;
  44                 spi2 = &ecspi3;
  45                 spi3 = &ecspi4;
  46                 spi4 = &ecspi5;
  47                 usbphy0 = &usbphy1;
  48                 usbphy1 = &usbphy2;
  49         };
  50
  51         cpus {
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54
  55                 cpu0: cpu@0 {
  56                         compatible = "arm,cortex-a9";
  57                         device_type = "cpu";
  58                         reg = <0>;
  59                         next-level-cache = <&L2>;
  60                         operating-points = <
  61                                 /* kHz    uV */
  62                                 996000  1250000
  63                                 792000  1175000
  64                                 396000  1075000
  65                         >;
  66                         fsl,soc-operating-points = <
  67                                 /* ARM kHz  SOC uV */
  68                                 996000      1175000
  69                                 792000      1175000
  70                                 396000      1175000
  71                         >;
  72                         clock-latency = <61036>; /* two CLK32 periods */
  73                         clocks = <&clks IMX6SX_CLK_ARM>,
  74                                  <&clks IMX6SX_CLK_PLL2_PFD2>,
  75                                  <&clks IMX6SX_CLK_STEP>,
  76                                  <&clks IMX6SX_CLK_PLL1_SW>,
  77                                  <&clks IMX6SX_CLK_PLL1_SYS>;
  78                         clock-names = "arm", "pll2_pfd2_396m", "step",
  79                                       "pll1_sw", "pll1_sys";
  80                         arm-supply = <&reg_arm>;
  81                         soc-supply = <&reg_soc>;
  82                 };
  83         };
  84
  85         intc: interrupt-controller@00a01000 {
  86                 compatible = "arm,cortex-a9-gic";
  87                 #interrupt-cells = <3>;
  88                 interrupt-controller;
  89                 reg = <0x00a01000 0x1000>,
  90                       <0x00a00100 0x100>;
  91         };
  92
  93         clocks {
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96
  97                 ckil: clock@0 {
  98                         compatible = "fixed-clock";
  99                         reg = <0>;
 100                         #clock-cells = <0>;
 101                         clock-frequency = <32768>;
 102                         clock-output-names = "ckil";
 103                 };
 104
 105                 osc: clock@1 {
 106                         compatible = "fixed-clock";
 107                         reg = <1>;
 108                         #clock-cells = <0>;
 109                         clock-frequency = <24000000>;
 110                         clock-output-names = "osc";
 111                 };
 112
 113                 ipp_di0: clock@2 {
 114                         compatible = "fixed-clock";
 115                         reg = <2>;
 116                         #clock-cells = <0>;
 117                         clock-frequency = <0>;
 118                         clock-output-names = "ipp_di0";
 119                 };
 120
 121                 ipp_di1: clock@3 {
 122                         compatible = "fixed-clock";
 123                         reg = <3>;
 124                         #clock-cells = <0>;
 125                         clock-frequency = <0>;
 126                         clock-output-names = "ipp_di1";
 127                 };
 128         };
 129
 130         soc {
 131                 #address-cells = <1>;
 132                 #size-cells = <1>;
 133                 compatible = "simple-bus";
 134                 interrupt-parent = <&intc>;
 135                 ranges;
 136
 137                 pmu {
 138                         compatible = "arm,cortex-a9-pmu";
 139                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 140                 };
 141
 142                 ocram: sram@00900000 {
 143                         compatible = "mmio-sram";
 144                         reg = <0x00900000 0x20000>;
 145                         clocks = <&clks IMX6SX_CLK_OCRAM>;
 146                 };
 147
 148                 L2: l2-cache@00a02000 {
 149                         compatible = "arm,pl310-cache";
 150                         reg = <0x00a02000 0x1000>;
 151                         interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 152                         cache-unified;
 153                         cache-level = <2>;
 154                         arm,tag-latency = <4 2 3>;
 155                         arm,data-latency = <4 2 3>;
 156                 };
 157
 158                 dma_apbh: dma-apbh@01804000 {
 159                         compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh";
 160                         reg = <0x01804000 0x2000>;
 161                         interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 162                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 163                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 164                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 165                         interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 166                         #dma-cells = <1>;
 167                         dma-channels = <4>;
 168                         clocks = <&clks IMX6SX_CLK_APBH_DMA>;
 169                 };
 170
 171                 gpmi: gpmi-nand@01806000{
 172                         compatible = "fsl,imx6sx-gpmi-nand";
 173                         #address-cells = <1>;
 174                         #size-cells = <1>;
 175                         reg = <0x01806000 0x2000>, <0x01808000 0x4000>;
 176                         reg-names = "gpmi-nand", "bch";
 177                         interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 178                         interrupt-names = "bch";
 179                         clocks = <&clks IMX6SX_CLK_GPMI_IO>,
 180                                  <&clks IMX6SX_CLK_GPMI_APB>,
 181                                  <&clks IMX6SX_CLK_GPMI_BCH>,
 182                                  <&clks IMX6SX_CLK_GPMI_BCH_APB>,
 183                                  <&clks IMX6SX_CLK_PER1_BCH>;
 184                         clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
 185                                       "gpmi_bch_apb", "per1_bch";
 186                         dmas = <&dma_apbh 0>;
 187                         dma-names = "rx-tx";
 188                         status = "disabled";
 189                 };
 190
 191                 aips1: aips-bus@02000000 {
 192                         compatible = "fsl,aips-bus", "simple-bus";
 193                         #address-cells = <1>;
 194                         #size-cells = <1>;
 195                         reg = <0x02000000 0x100000>;
 196                         ranges;
 197
 198                         spba-bus@02000000 {
 199                                 compatible = "fsl,spba-bus", "simple-bus";
 200                                 #address-cells = <1>;
 201                                 #size-cells = <1>;
 202                                 reg = <0x02000000 0x40000>;
 203                                 ranges;
 204
 205                                 spdif: spdif@02004000 {
 206                                         compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif";
 207                                         reg = <0x02004000 0x4000>;
 208                                         interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 209                                         dmas = <&sdma 14 18 0>,
 210                                                <&sdma 15 18 0>;
 211                                         dma-names = "rx", "tx";
 212                                         clocks = <&clks IMX6SX_CLK_SPDIF>,
 213                                                  <&clks IMX6SX_CLK_OSC>,
 214                                                  <&clks IMX6SX_CLK_SPDIF>,
 215                                                  <&clks 0>, <&clks 0>, <&clks 0>,
 216                                                  <&clks IMX6SX_CLK_IPG>,
 217                                                  <&clks 0>, <&clks 0>,
 218                                                  <&clks IMX6SX_CLK_SPBA>;
 219                                         clock-names = "core", "rxtx0",
 220                                                       "rxtx1", "rxtx2",
 221                                                       "rxtx3", "rxtx4",
 222                                                       "rxtx5", "rxtx6",
 223                                                       "rxtx7", "dma";
 224                                         status = "disabled";
 225                                 };
 226
 227                                 ecspi1: ecspi@02008000 {
 228                                         #address-cells = <1>;
 229                                         #size-cells = <0>;
 230                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 231                                         reg = <0x02008000 0x4000>;
 232                                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 233                                         clocks = <&clks IMX6SX_CLK_ECSPI1>,
 234                                                  <&clks IMX6SX_CLK_ECSPI1>;
 235                                         clock-names = "ipg", "per";
 236                                         status = "disabled";
 237                                 };
 238
 239                                 ecspi2: ecspi@0200c000 {
 240                                         #address-cells = <1>;
 241                                         #size-cells = <0>;
 242                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 243                                         reg = <0x0200c000 0x4000>;
 244                                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 245                                         clocks = <&clks IMX6SX_CLK_ECSPI2>,
 246                                                  <&clks IMX6SX_CLK_ECSPI2>;
 247                                         clock-names = "ipg", "per";
 248                                         status = "disabled";
 249                                 };
 250
 251                                 ecspi3: ecspi@02010000 {
 252                                         #address-cells = <1>;
 253                                         #size-cells = <0>;
 254                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 255                                         reg = <0x02010000 0x4000>;
 256                                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 257                                         clocks = <&clks IMX6SX_CLK_ECSPI3>,
 258                                                  <&clks IMX6SX_CLK_ECSPI3>;
 259                                         clock-names = "ipg", "per";
 260                                         status = "disabled";
 261                                 };
 262
 263                                 ecspi4: ecspi@02014000 {
 264                                         #address-cells = <1>;
 265                                         #size-cells = <0>;
 266                                         compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
 267                                         reg = <0x02014000 0x4000>;
 268                                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 269                                         clocks = <&clks IMX6SX_CLK_ECSPI4>,
 270                                                  <&clks IMX6SX_CLK_ECSPI4>;
 271                                         clock-names = "ipg", "per";
 272                                         status = "disabled";
 273                                 };
 274
 275                                 uart1: serial@02020000 {
 276                                         compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 277                                         reg = <0x02020000 0x4000>;
 278                                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 279                                         clocks = <&clks IMX6SX_CLK_UART_IPG>,
 280                                                  <&clks IMX6SX_CLK_UART_SERIAL>;
 281                                         clock-names = "ipg", "per";
 282                                         dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
 283                                         dma-names = "rx", "tx";
 284                                         status = "disabled";
 285                                 };
 286
 287                                 esai: esai@02024000 {
 288                                         reg = <0x02024000 0x4000>;
 289                                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 290                                         clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
 291                                                  <&clks IMX6SX_CLK_ESAI_MEM>,
 292                                                  <&clks IMX6SX_CLK_ESAI_EXTAL>,
 293                                                  <&clks IMX6SX_CLK_ESAI_IPG>,
 294                                                  <&clks IMX6SX_CLK_SPBA>;
 295                                         clock-names = "core", "mem", "extal",
 296                                                       "fsys", "dma";
 297                                         status = "disabled";
 298                                 };
 299
 300                                 ssi1: ssi@02028000 {
 301                                         #sound-dai-cells = <0>;
 302                                         compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 303                                         reg = <0x02028000 0x4000>;
 304                                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 305                                         clocks = <&clks IMX6SX_CLK_SSI1_IPG>,
 306                                                  <&clks IMX6SX_CLK_SSI1>;
 307                                         clock-names = "ipg", "baud";
 308                                         dmas = <&sdma 37 1 0>, <&sdma 38 1 0>;
 309                                         dma-names = "rx", "tx";
 310                                         fsl,fifo-depth = <15>;
 311                                         status = "disabled";
 312                                 };
 313
 314                                 ssi2: ssi@0202c000 {
 315                                         #sound-dai-cells = <0>;
 316                                         compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 317                                         reg = <0x0202c000 0x4000>;
 318                                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 319                                         clocks = <&clks IMX6SX_CLK_SSI2_IPG>,
 320                                                  <&clks IMX6SX_CLK_SSI2>;
 321                                         clock-names = "ipg", "baud";
 322                                         dmas = <&sdma 41 1 0>, <&sdma 42 1 0>;
 323                                         dma-names = "rx", "tx";
 324                                         fsl,fifo-depth = <15>;
 325                                         status = "disabled";
 326                                 };
 327
 328                                 ssi3: ssi@02030000 {
 329                                         #sound-dai-cells = <0>;
 330                                         compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi";
 331                                         reg = <0x02030000 0x4000>;
 332                                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 333                                         clocks = <&clks IMX6SX_CLK_SSI3_IPG>,
 334                                                  <&clks IMX6SX_CLK_SSI3>;
 335                                         clock-names = "ipg", "baud";
 336                                         dmas = <&sdma 45 1 0>, <&sdma 46 1 0>;
 337                                         dma-names = "rx", "tx";
 338                                         fsl,fifo-depth = <15>;
 339                                         status = "disabled";
 340                                 };
 341
 342                                 asrc: asrc@02034000 {
 343                                         reg = <0x02034000 0x4000>;
 344                                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 345                                         clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
 346                                                  <&clks IMX6SX_CLK_ASRC_IPG>,
 347                                                  <&clks IMX6SX_CLK_SPDIF>,
 348                                                  <&clks IMX6SX_CLK_SPBA>;
 349                                         clock-names = "mem", "ipg", "asrck", "dma";
 350                                         dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
 351                                                <&sdma 19 20 1>, <&sdma 20 20 1>,
 352                                                <&sdma 21 20 1>, <&sdma 22 20 1>;
 353                                         dma-names = "rxa", "rxb", "rxc",
 354                                                     "txa", "txb", "txc";
 355                                         status = "okay";
 356                                 };
 357                         };
 358
 359                         pwm1: pwm@02080000 {
 360                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 361                                 reg = <0x02080000 0x4000>;
 362                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 363                                 clocks = <&clks IMX6SX_CLK_PWM1>,
 364                                          <&clks IMX6SX_CLK_PWM1>;
 365                                 clock-names = "ipg", "per";
 366                                 #pwm-cells = <2>;
 367                         };
 368
 369                         pwm2: pwm@02084000 {
 370                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 371                                 reg = <0x02084000 0x4000>;
 372                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 373                                 clocks = <&clks IMX6SX_CLK_PWM2>,
 374                                          <&clks IMX6SX_CLK_PWM2>;
 375                                 clock-names = "ipg", "per";
 376                                 #pwm-cells = <2>;
 377                         };
 378
 379                         pwm3: pwm@02088000 {
 380                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 381                                 reg = <0x02088000 0x4000>;
 382                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 383                                 clocks = <&clks IMX6SX_CLK_PWM3>,
 384                                          <&clks IMX6SX_CLK_PWM3>;
 385                                 clock-names = "ipg", "per";
 386                                 #pwm-cells = <2>;
 387                         };
 388
 389                         pwm4: pwm@0208c000 {
 390                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
 391                                 reg = <0x0208c000 0x4000>;
 392                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 393                                 clocks = <&clks IMX6SX_CLK_PWM4>,
 394                                          <&clks IMX6SX_CLK_PWM4>;
 395                                 clock-names = "ipg", "per";
 396                                 #pwm-cells = <2>;
 397                         };
 398
 399                         flexcan1: can@02090000 {
 400                                 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 401                                 reg = <0x02090000 0x4000>;
 402                                 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 403                                 clocks = <&clks IMX6SX_CLK_CAN1_IPG>,
 404                                          <&clks IMX6SX_CLK_CAN1_SERIAL>;
 405                                 clock-names = "ipg", "per";
 406                                 status = "disabled";
 407                         };
 408
 409                         flexcan2: can@02094000 {
 410                                 compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan";
 411                                 reg = <0x02094000 0x4000>;
 412                                 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 413                                 clocks = <&clks IMX6SX_CLK_CAN2_IPG>,
 414                                          <&clks IMX6SX_CLK_CAN2_SERIAL>;
 415                                 clock-names = "ipg", "per";
 416                                 status = "disabled";
 417                         };
 418
 419                         gpt: gpt@02098000 {
 420                                 compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
 421                                 reg = <0x02098000 0x4000>;
 422                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 423                                 clocks = <&clks IMX6SX_CLK_GPT_BUS>,
 424                                          <&clks IMX6SX_CLK_GPT_3M>;
 425                                 clock-names = "ipg", "per";
 426                         };
 427
 428                         gpio1: gpio@0209c000 {
 429                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 430                                 reg = <0x0209c000 0x4000>;
 431                                 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
 432                                              <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
 433                                 gpio-controller;
 434                                 #gpio-cells = <2>;
 435                                 interrupt-controller;
 436                                 #interrupt-cells = <2>;
 437                         };
 438
 439                         gpio2: gpio@020a0000 {
 440                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 441                                 reg = <0x020a0000 0x4000>;
 442                                 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
 443                                              <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 444                                 gpio-controller;
 445                                 #gpio-cells = <2>;
 446                                 interrupt-controller;
 447                                 #interrupt-cells = <2>;
 448                         };
 449
 450                         gpio3: gpio@020a4000 {
 451                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 452                                 reg = <0x020a4000 0x4000>;
 453                                 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 454                                              <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 455                                 gpio-controller;
 456                                 #gpio-cells = <2>;
 457                                 interrupt-controller;
 458                                 #interrupt-cells = <2>;
 459                         };
 460
 461                         gpio4: gpio@020a8000 {
 462                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 463                                 reg = <0x020a8000 0x4000>;
 464                                 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
 465                                              <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 466                                 gpio-controller;
 467                                 #gpio-cells = <2>;
 468                                 interrupt-controller;
 469                                 #interrupt-cells = <2>;
 470                         };
 471
 472                         gpio5: gpio@020ac000 {
 473                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 474                                 reg = <0x020ac000 0x4000>;
 475                                 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
 476                                              <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 477                                 gpio-controller;
 478                                 #gpio-cells = <2>;
 479                                 interrupt-controller;
 480                                 #interrupt-cells = <2>;
 481                         };
 482
 483                         gpio6: gpio@020b0000 {
 484                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 485                                 reg = <0x020b0000 0x4000>;
 486                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
 487                                              <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 488                                 gpio-controller;
 489                                 #gpio-cells = <2>;
 490                                 interrupt-controller;
 491                                 #interrupt-cells = <2>;
 492                         };
 493
 494                         gpio7: gpio@020b4000 {
 495                                 compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio";
 496                                 reg = <0x020b4000 0x4000>;
 497                                 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
 498                                              <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 499                                 gpio-controller;
 500                                 #gpio-cells = <2>;
 501                                 interrupt-controller;
 502                                 #interrupt-cells = <2>;
 503                         };
 504
 505                         kpp: kpp@020b8000 {
 506                                 compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp";
 507                                 reg = <0x020b8000 0x4000>;
 508                                 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 509                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
 510                                 status = "disabled";
 511                         };
 512
 513                         wdog1: wdog@020bc000 {
 514                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 515                                 reg = <0x020bc000 0x4000>;
 516                                 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 517                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
 518                         };
 519
 520                         wdog2: wdog@020c0000 {
 521                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
 522                                 reg = <0x020c0000 0x4000>;
 523                                 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 524                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
 525                                 status = "disabled";
 526                         };
 527
 528                         clks: ccm@020c4000 {
 529                                 compatible = "fsl,imx6sx-ccm";
 530                                 reg = <0x020c4000 0x4000>;
 531                                 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
 532                                              <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 533                                 #clock-cells = <1>;
 534                                 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
 535                                 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
 536                         };
 537
 538                         anatop: anatop@020c8000 {
 539                                 compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop",
 540                                              "syscon", "simple-bus";
 541                                 reg = <0x020c8000 0x1000>;
 542                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
 543                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 544                                              <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 545
 546                                 regulator-1p1@110 {
 547                                         compatible = "fsl,anatop-regulator";
 548                                         regulator-name = "vdd1p1";
 549                                         regulator-min-microvolt = <800000>;
 550                                         regulator-max-microvolt = <1375000>;
 551                                         regulator-always-on;
 552                                         anatop-reg-offset = <0x110>;
 553                                         anatop-vol-bit-shift = <8>;
 554                                         anatop-vol-bit-width = <5>;
 555                                         anatop-min-bit-val = <4>;
 556                                         anatop-min-voltage = <800000>;
 557                                         anatop-max-voltage = <1375000>;
 558                                 };
 559
 560                                 regulator-3p0@120 {
 561                                         compatible = "fsl,anatop-regulator";
 562                                         regulator-name = "vdd3p0";
 563                                         regulator-min-microvolt = <2800000>;
 564                                         regulator-max-microvolt = <3150000>;
 565                                         regulator-always-on;
 566                                         anatop-reg-offset = <0x120>;
 567                                         anatop-vol-bit-shift = <8>;
 568                                         anatop-vol-bit-width = <5>;
 569                                         anatop-min-bit-val = <0>;
 570                                         anatop-min-voltage = <2625000>;
 571                                         anatop-max-voltage = <3400000>;
 572                                 };
 573
 574                                 regulator-2p5@130 {
 575                                         compatible = "fsl,anatop-regulator";
 576                                         regulator-name = "vdd2p5";
 577                                         regulator-min-microvolt = <2100000>;
 578                                         regulator-max-microvolt = <2875000>;
 579                                         regulator-always-on;
 580                                         anatop-reg-offset = <0x130>;
 581                                         anatop-vol-bit-shift = <8>;
 582                                         anatop-vol-bit-width = <5>;
 583                                         anatop-min-bit-val = <0>;
 584                                         anatop-min-voltage = <2100000>;
 585                                         anatop-max-voltage = <2875000>;
 586                                 };
 587
 588                                 reg_arm: regulator-vddcore@140 {
 589                                         compatible = "fsl,anatop-regulator";
 590                                         regulator-name = "vddarm";
 591                                         regulator-min-microvolt = <725000>;
 592                                         regulator-max-microvolt = <1450000>;
 593                                         regulator-always-on;
 594                                         anatop-reg-offset = <0x140>;
 595                                         anatop-vol-bit-shift = <0>;
 596                                         anatop-vol-bit-width = <5>;
 597                                         anatop-delay-reg-offset = <0x170>;
 598                                         anatop-delay-bit-shift = <24>;
 599                                         anatop-delay-bit-width = <2>;
 600                                         anatop-min-bit-val = <1>;
 601                                         anatop-min-voltage = <725000>;
 602                                         anatop-max-voltage = <1450000>;
 603                                 };
 604
 605                                 reg_pcie: regulator-vddpcie@140 {
 606                                         compatible = "fsl,anatop-regulator";
 607                                         regulator-name = "vddpcie";
 608                                         regulator-min-microvolt = <725000>;
 609                                         regulator-max-microvolt = <1450000>;
 610                                         anatop-reg-offset = <0x140>;
 611                                         anatop-vol-bit-shift = <9>;
 612                                         anatop-vol-bit-width = <5>;
 613                                         anatop-delay-reg-offset = <0x170>;
 614                                         anatop-delay-bit-shift = <26>;
 615                                         anatop-delay-bit-width = <2>;
 616                                         anatop-min-bit-val = <1>;
 617                                         anatop-min-voltage = <725000>;
 618                                         anatop-max-voltage = <1450000>;
 619                                 };
 620
 621                                 reg_soc: regulator-vddsoc@140 {
 622                                         compatible = "fsl,anatop-regulator";
 623                                         regulator-name = "vddsoc";
 624                                         regulator-min-microvolt = <725000>;
 625                                         regulator-max-microvolt = <1450000>;
 626                                         regulator-always-on;
 627                                         anatop-reg-offset = <0x140>;
 628                                         anatop-vol-bit-shift = <18>;
 629                                         anatop-vol-bit-width = <5>;
 630                                         anatop-delay-reg-offset = <0x170>;
 631                                         anatop-delay-bit-shift = <28>;
 632                                         anatop-delay-bit-width = <2>;
 633                                         anatop-min-bit-val = <1>;
 634                                         anatop-min-voltage = <725000>;
 635                                         anatop-max-voltage = <1450000>;
 636                                 };
 637                         };
 638
 639                         tempmon: tempmon {
 640                                 compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
 641                                 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 642                                 fsl,tempmon = <&anatop>;
 643                                 fsl,tempmon-data = <&ocotp>;
 644                                 clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
 645                         };
 646
 647                         usbphy1: usbphy@020c9000 {
 648                                 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 649                                 reg = <0x020c9000 0x1000>;
 650                                 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 651                                 clocks = <&clks IMX6SX_CLK_USBPHY1>;
 652                                 fsl,anatop = <&anatop>;
 653                         };
 654
 655                         usbphy2: usbphy@020ca000 {
 656                                 compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy";
 657                                 reg = <0x020ca000 0x1000>;
 658                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 659                                 clocks = <&clks IMX6SX_CLK_USBPHY2>;
 660                                 fsl,anatop = <&anatop>;
 661                         };
 662
 663                         snvs: snvs@020cc000 {
 664                                 compatible = "fsl,sec-v4.0-mon", "simple-bus";
 665                                 #address-cells = <1>;
 666                                 #size-cells = <1>;
 667                                 ranges = <0 0x020cc000 0x4000>;
 668
 669                                 snvs-rtc-lp@34 {
 670                                         compatible = "fsl,sec-v4.0-mon-rtc-lp";
 671                                         reg = <0x34 0x58>;
 672                                         interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 673                                 };
 674
 675                                 snvs_poweroff: snvs-poweroff@38 {
 676                                         compatible = "fsl,sec-v4.0-poweroff";
 677                                         reg = <0x38 0x4>;
 678                                         status = "disabled";
 679                                 };
 680                         };
 681
 682                         epit1: epit@020d0000 {
 683                                 reg = <0x020d0000 0x4000>;
 684                                 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 685                         };
 686
 687                         epit2: epit@020d4000 {
 688                                 reg = <0x020d4000 0x4000>;
 689                                 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 690                         };
 691
 692                         src: src@020d8000 {
 693                                 compatible = "fsl,imx6sx-src", "fsl,imx51-src";
 694                                 reg = <0x020d8000 0x4000>;
 695                                 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
 696                                              <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 697                                 #reset-cells = <1>;
 698                         };
 699
 700                         gpc: gpc@020dc000 {
 701                                 compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc";
 702                                 reg = <0x020dc000 0x4000>;
 703                                 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 704                         };
 705
 706                         iomuxc: iomuxc@020e0000 {
 707                                 compatible = "fsl,imx6sx-iomuxc";
 708                                 reg = <0x020e0000 0x4000>;
 709                         };
 710
 711                         gpr: iomuxc-gpr@020e4000 {
 712                                 compatible = "fsl,imx6sx-iomuxc-gpr",
 713                                              "fsl,imx6q-iomuxc-gpr", "syscon";
 714                                 reg = <0x020e4000 0x4000>;
 715                         };
 716
 717                         sdma: sdma@020ec000 {
 718                                 compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma";
 719                                 reg = <0x020ec000 0x4000>;
 720                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 721                                 clocks = <&clks IMX6SX_CLK_SDMA>,
 722                                          <&clks IMX6SX_CLK_SDMA>;
 723                                 clock-names = "ipg", "ahb";
 724                                 #dma-cells = <3>;
 725                                 /* imx6sx reuses imx6q sdma firmware */
 726                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
 727                         };
 728                 };
 729
 730                 aips2: aips-bus@02100000 {
 731                         compatible = "fsl,aips-bus", "simple-bus";
 732                         #address-cells = <1>;
 733                         #size-cells = <1>;
 734                         reg = <0x02100000 0x100000>;
 735                         ranges;
 736
 737                         usbotg1: usb@02184000 {
 738                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 739                                 reg = <0x02184000 0x200>;
 740                                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 741                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 742                                 fsl,usbphy = <&usbphy1>;
 743                                 fsl,usbmisc = <&usbmisc 0>;
 744                                 fsl,anatop = <&anatop>;
 745                                 status = "disabled";
 746                         };
 747
 748                         usbotg2: usb@02184200 {
 749                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 750                                 reg = <0x02184200 0x200>;
 751                                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 752                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 753                                 fsl,usbphy = <&usbphy2>;
 754                                 fsl,usbmisc = <&usbmisc 1>;
 755                                 status = "disabled";
 756                         };
 757
 758                         usbh: usb@02184400 {
 759                                 compatible = "fsl,imx6sx-usb", "fsl,imx27-usb";
 760                                 reg = <0x02184400 0x200>;
 761                                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 762                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 763                                 fsl,usbmisc = <&usbmisc 2>;
 764                                 phy_type = "hsic";
 765                                 fsl,anatop = <&anatop>;
 766                                 status = "disabled";
 767                         };
 768
 769                         usbmisc: usbmisc@02184800 {
 770                                 #index-cells = <1>;
 771                                 compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc";
 772                                 reg = <0x02184800 0x200>;
 773                                 clocks = <&clks IMX6SX_CLK_USBOH3>;
 774                         };
 775
 776                         fec1: ethernet@02188000 {
 777                                 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 778                                 reg = <0x02188000 0x4000>;
 779                                 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
 780                                              <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 781                                 clocks = <&clks IMX6SX_CLK_ENET>,
 782                                          <&clks IMX6SX_CLK_ENET_AHB>,
 783                                          <&clks IMX6SX_CLK_ENET_PTP>,
 784                                          <&clks IMX6SX_CLK_ENET_REF>,
 785                                          <&clks IMX6SX_CLK_ENET_PTP>;
 786                                 clock-names = "ipg", "ahb", "ptp",
 787                                               "enet_clk_ref", "enet_out";
 788                                 fsl,num-tx-queues=<3>;
 789                                 fsl,num-rx-queues=<3>;
 790                                 status = "disabled";
 791                         };
 792
 793                         mlb: mlb@0218c000 {
 794                                 reg = <0x0218c000 0x4000>;
 795                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 796                                              <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
 797                                              <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 798                                 clocks = <&clks IMX6SX_CLK_MLB>;
 799                                 status = "disabled";
 800                         };
 801
 802                         usdhc1: usdhc@02190000 {
 803                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 804                                 reg = <0x02190000 0x4000>;
 805                                 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 806                                 clocks = <&clks IMX6SX_CLK_USDHC1>,
 807                                          <&clks IMX6SX_CLK_USDHC1>,
 808                                          <&clks IMX6SX_CLK_USDHC1>;
 809                                 clock-names = "ipg", "ahb", "per";
 810                                 bus-width = <4>;
 811                                 status = "disabled";
 812                         };
 813
 814                         usdhc2: usdhc@02194000 {
 815                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 816                                 reg = <0x02194000 0x4000>;
 817                                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 818                                 clocks = <&clks IMX6SX_CLK_USDHC2>,
 819                                          <&clks IMX6SX_CLK_USDHC2>,
 820                                          <&clks IMX6SX_CLK_USDHC2>;
 821                                 clock-names = "ipg", "ahb", "per";
 822                                 bus-width = <4>;
 823                                 status = "disabled";
 824                         };
 825
 826                         usdhc3: usdhc@02198000 {
 827                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 828                                 reg = <0x02198000 0x4000>;
 829                                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 830                                 clocks = <&clks IMX6SX_CLK_USDHC3>,
 831                                          <&clks IMX6SX_CLK_USDHC3>,
 832                                          <&clks IMX6SX_CLK_USDHC3>;
 833                                 clock-names = "ipg", "ahb", "per";
 834                                 bus-width = <4>;
 835                                 status = "disabled";
 836                         };
 837
 838                         usdhc4: usdhc@0219c000 {
 839                                 compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 840                                 reg = <0x0219c000 0x4000>;
 841                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 842                                 clocks = <&clks IMX6SX_CLK_USDHC4>,
 843                                          <&clks IMX6SX_CLK_USDHC4>,
 844                                          <&clks IMX6SX_CLK_USDHC4>;
 845                                 clock-names = "ipg", "ahb", "per";
 846                                 bus-width = <4>;
 847                                 status = "disabled";
 848                         };
 849
 850                         i2c1: i2c@021a0000 {
 851                                 #address-cells = <1>;
 852                                 #size-cells = <0>;
 853                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 854                                 reg = <0x021a0000 0x4000>;
 855                                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 856                                 clocks = <&clks IMX6SX_CLK_I2C1>;
 857                                 status = "disabled";
 858                         };
 859
 860                         i2c2: i2c@021a4000 {
 861                                 #address-cells = <1>;
 862                                 #size-cells = <0>;
 863                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 864                                 reg = <0x021a4000 0x4000>;
 865                                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 866                                 clocks = <&clks IMX6SX_CLK_I2C2>;
 867                                 status = "disabled";
 868                         };
 869
 870                         i2c3: i2c@021a8000 {
 871                                 #address-cells = <1>;
 872                                 #size-cells = <0>;
 873                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
 874                                 reg = <0x021a8000 0x4000>;
 875                                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 876                                 clocks = <&clks IMX6SX_CLK_I2C3>;
 877                                 status = "disabled";
 878                         };
 879
 880                         mmdc: mmdc@021b0000 {
 881                                 compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc";
 882                                 reg = <0x021b0000 0x4000>;
 883                         };
 884
 885                         fec2: ethernet@021b4000 {
 886                                 compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
 887                                 reg = <0x021b4000 0x4000>;
 888                                 interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
 889                                              <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 890                                 clocks = <&clks IMX6SX_CLK_ENET>,
 891                                          <&clks IMX6SX_CLK_ENET_AHB>,
 892                                          <&clks IMX6SX_CLK_ENET_PTP>,
 893                                          <&clks IMX6SX_CLK_ENET2_REF_125M>,
 894                                          <&clks IMX6SX_CLK_ENET_PTP>;
 895                                 clock-names = "ipg", "ahb", "ptp",
 896                                               "enet_clk_ref", "enet_out";
 897                                 status = "disabled";
 898                         };
 899
 900                         weim: weim@021b8000 {
 901                                 compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim";
 902                                 reg = <0x021b8000 0x4000>;
 903                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 904                                 clocks = <&clks IMX6SX_CLK_EIM_SLOW>;
 905                         };
 906
 907                         ocotp: ocotp@021bc000 {
 908                                 compatible = "fsl,imx6sx-ocotp", "syscon";
 909                                 reg = <0x021bc000 0x4000>;
 910                                 clocks = <&clks IMX6SX_CLK_OCOTP>;
 911                         };
 912
 913                         sai1: sai@021d4000 {
 914                                 compatible = "fsl,imx6sx-sai";
 915                                 reg = <0x021d4000 0x4000>;
 916                                 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 917                                 clocks = <&clks IMX6SX_CLK_SAI1_IPG>,
 918                                          <&clks IMX6SX_CLK_SAI1>,
 919                                          <&clks 0>, <&clks 0>;
 920                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 921                                 dma-names = "rx", "tx";
 922                                 dmas = <&sdma 31 23 0>, <&sdma 32 23 0>;
 923                                 dma-source = <&gpr 0 15 0 16>;
 924                                 status = "disabled";
 925                         };
 926
 927                         audmux: audmux@021d8000 {
 928                                 compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux";
 929                                 reg = <0x021d8000 0x4000>;
 930                                 status = "disabled";
 931                         };
 932
 933                         sai2: sai@021dc000 {
 934                                 compatible = "fsl,imx6sx-sai";
 935                                 reg = <0x021dc000 0x4000>;
 936                                 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 937                                 clocks = <&clks IMX6SX_CLK_SAI2_IPG>,
 938                                          <&clks IMX6SX_CLK_SAI2>,
 939                                          <&clks 0>, <&clks 0>;
 940                                 clock-names = "bus", "mclk1", "mclk2", "mclk3";
 941                                 dma-names = "rx", "tx";
 942                                 dmas = <&sdma 33 23 0>, <&sdma 34 23 0>;
 943                                 dma-source = <&gpr 0 17 0 18>;
 944                                 status = "disabled";
 945                         };
 946
 947                         qspi1: qspi@021e0000 {
 948                                 #address-cells = <1>;
 949                                 #size-cells = <0>;
 950                                 compatible = "fsl,imx6sx-qspi";
 951                                 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
 952                                 reg-names = "QuadSPI", "QuadSPI-memory";
 953                                 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 954                                 clocks = <&clks IMX6SX_CLK_QSPI1>,
 955                                          <&clks IMX6SX_CLK_QSPI1>;
 956                                 clock-names = "qspi_en", "qspi";
 957                                 status = "disabled";
 958                         };
 959
 960                         qspi2: qspi@021e4000 {
 961                                 #address-cells = <1>;
 962                                 #size-cells = <0>;
 963                                 compatible = "fsl,imx6sx-qspi";
 964                                 reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>;
 965                                 reg-names = "QuadSPI", "QuadSPI-memory";
 966                                 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 967                                 clocks = <&clks IMX6SX_CLK_QSPI2>,
 968                                          <&clks IMX6SX_CLK_QSPI2>;
 969                                 clock-names = "qspi_en", "qspi";
 970                                 status = "disabled";
 971                         };
 972
 973                         uart2: serial@021e8000 {
 974                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 975                                 reg = <0x021e8000 0x4000>;
 976                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 977                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
 978                                          <&clks IMX6SX_CLK_UART_SERIAL>;
 979                                 clock-names = "ipg", "per";
 980                                 dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
 981                                 dma-names = "rx", "tx";
 982                                 status = "disabled";
 983                         };
 984
 985                         uart3: serial@021ec000 {
 986                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 987                                 reg = <0x021ec000 0x4000>;
 988                                 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 989                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
 990                                          <&clks IMX6SX_CLK_UART_SERIAL>;
 991                                 clock-names = "ipg", "per";
 992                                 dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
 993                                 dma-names = "rx", "tx";
 994                                 status = "disabled";
 995                         };
 996
 997                         uart4: serial@021f0000 {
 998                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
 999                                 reg = <0x021f0000 0x4000>;
1000                                 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
1001                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1002                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1003                                 clock-names = "ipg", "per";
1004                                 dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
1005                                 dma-names = "rx", "tx";
1006                                 status = "disabled";
1007                         };
1008
1009                         uart5: serial@021f4000 {
1010                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1011                                 reg = <0x021f4000 0x4000>;
1012                                 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
1013                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1014                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1015                                 clock-names = "ipg", "per";
1016                                 dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
1017                                 dma-names = "rx", "tx";
1018                                 status = "disabled";
1019                         };
1020
1021                         i2c4: i2c@021f8000 {
1022                                 #address-cells = <1>;
1023                                 #size-cells = <0>;
1024                                 compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c";
1025                                 reg = <0x021f8000 0x4000>;
1026                                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
1027                                 clocks = <&clks IMX6SX_CLK_I2C4>;
1028                                 status = "disabled";
1029                         };
1030                 };
1031
1032                 aips3: aips-bus@02200000 {
1033                         compatible = "fsl,aips-bus", "simple-bus";
1034                         #address-cells = <1>;
1035                         #size-cells = <1>;
1036                         reg = <0x02200000 0x100000>;
1037                         ranges;
1038
1039                         spba-bus@02200000 {
1040                                 compatible = "fsl,spba-bus", "simple-bus";
1041                                 #address-cells = <1>;
1042                                 #size-cells = <1>;
1043                                 reg = <0x02240000 0x40000>;
1044                                 ranges;
1045
1046                                 csi1: csi@02214000 {
1047                                         reg = <0x02214000 0x4000>;
1048                                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1049                                         clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1050                                                  <&clks IMX6SX_CLK_CSI>,
1051                                                  <&clks IMX6SX_CLK_DCIC1>;
1052                                         clock-names = "disp-axi", "csi_mclk", "dcic";
1053                                         status = "disabled";
1054                                 };
1055
1056                                 pxp: pxp@02218000 {
1057                                         reg = <0x02218000 0x4000>;
1058                                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
1059                                         clocks = <&clks IMX6SX_CLK_PXP_AXI>,
1060                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1061                                         clock-names = "pxp-axi", "disp-axi";
1062                                         status = "disabled";
1063                                 };
1064
1065                                 csi2: csi@0221c000 {
1066                                         reg = <0x0221c000 0x4000>;
1067                                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1068                                         clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>,
1069                                                  <&clks IMX6SX_CLK_CSI>,
1070                                                  <&clks IMX6SX_CLK_DCIC2>;
1071                                         clock-names = "disp-axi", "csi_mclk", "dcic";
1072                                         status = "disabled";
1073                                 };
1074
1075                                 lcdif1: lcdif@02220000 {
1076                                         compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1077                                         reg = <0x02220000 0x4000>;
1078                                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
1079                                         clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
1080                                                  <&clks IMX6SX_CLK_LCDIF_APB>,
1081                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1082                                         clock-names = "pix", "axi", "disp_axi";
1083                                         status = "disabled";
1084                                 };
1085
1086                                 lcdif2: lcdif@02224000 {
1087                                         compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
1088                                         reg = <0x02224000 0x4000>;
1089                                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1090                                         clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>,
1091                                                  <&clks IMX6SX_CLK_LCDIF_APB>,
1092                                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1093                                         clock-names = "pix", "axi", "disp_axi";
1094                                         status = "disabled";
1095                                 };
1096
1097                                 vadc: vadc@02228000 {
1098                                         reg = <0x02228000 0x4000>, <0x0222c000 0x4000>;
1099                                         reg-names = "vadc-vafe", "vadc-vdec";
1100                                         clocks = <&clks IMX6SX_CLK_VADC>,
1101                                                  <&clks IMX6SX_CLK_CSI>;
1102                                         clock-names = "vadc", "csi";
1103                                         status = "disabled";
1104                                 };
1105                         };
1106
1107                         adc1: adc@02280000 {
1108                                 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1109                                 reg = <0x02280000 0x4000>;
1110                                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1111                                 clocks = <&clks IMX6SX_CLK_IPG>;
1112                                 clock-names = "adc";
1113                                 status = "disabled";
1114                         };
1115
1116                         adc2: adc@02284000 {
1117                                 compatible = "fsl,imx6sx-adc", "fsl,vf610-adc";
1118                                 reg = <0x02284000 0x4000>;
1119                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1120                                 clocks = <&clks IMX6SX_CLK_IPG>;
1121                                 clock-names = "adc";
1122                                 status = "disabled";
1123                         };
1124
1125                         wdog3: wdog@02288000 {
1126                                 compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt";
1127                                 reg = <0x02288000 0x4000>;
1128                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1129                                 clocks = <&clks IMX6SX_CLK_DUMMY>;
1130                                 status = "disabled";
1131                         };
1132
1133                         ecspi5: ecspi@0228c000 {
1134                                 #address-cells = <1>;
1135                                 #size-cells = <0>;
1136                                 compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
1137                                 reg = <0x0228c000 0x4000>;
1138                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
1139                                 clocks = <&clks IMX6SX_CLK_ECSPI5>,
1140                                          <&clks IMX6SX_CLK_ECSPI5>;
1141                                 clock-names = "ipg", "per";
1142                                 status = "disabled";
1143                         };
1144
1145                         uart6: serial@022a0000 {
1146                                 compatible = "fsl,imx6sx-uart", "fsl,imx21-uart";
1147                                 reg = <0x022a0000 0x4000>;
1148                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
1149                                 clocks = <&clks IMX6SX_CLK_UART_IPG>,
1150                                          <&clks IMX6SX_CLK_UART_SERIAL>;
1151                                 clock-names = "ipg", "per";
1152                                 dmas = <&sdma 0 4 0>, <&sdma 47 4 0>;
1153                                 dma-names = "rx", "tx";
1154                                 status = "disabled";
1155                         };
1156
1157                         pwm5: pwm@022a4000 {
1158                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1159                                 reg = <0x022a4000 0x4000>;
1160                                 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
1161                                 clocks = <&clks IMX6SX_CLK_PWM5>,
1162                                          <&clks IMX6SX_CLK_PWM5>;
1163                                 clock-names = "ipg", "per";
1164                                 #pwm-cells = <2>;
1165                         };
1166
1167                         pwm6: pwm@022a8000 {
1168                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1169                                 reg = <0x022a8000 0x4000>;
1170                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
1171                                 clocks = <&clks IMX6SX_CLK_PWM6>,
1172                                          <&clks IMX6SX_CLK_PWM6>;
1173                                 clock-names = "ipg", "per";
1174                                 #pwm-cells = <2>;
1175                         };
1176
1177                         pwm7: pwm@022ac000 {
1178                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1179                                 reg = <0x022ac000 0x4000>;
1180                                 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
1181                                 clocks = <&clks IMX6SX_CLK_PWM7>,
1182                                          <&clks IMX6SX_CLK_PWM7>;
1183                                 clock-names = "ipg", "per";
1184                                 #pwm-cells = <2>;
1185                         };
1186
1187                         pwm8: pwm@0022b0000 {
1188                                 compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm";
1189                                 reg = <0x0022b0000 0x4000>;
1190                                 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1191                                 clocks = <&clks IMX6SX_CLK_PWM8>,
1192                                          <&clks IMX6SX_CLK_PWM8>;
1193                                 clock-names = "ipg", "per";
1194                                 #pwm-cells = <2>;
1195                         };
1196                 };
1197
1198                 pcie: pcie@0x08000000 {
1199                         compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1200                         reg = <0x08ffc000 0x4000>; /* DBI */
1201                         #address-cells = <3>;
1202                         #size-cells = <2>;
1203                         device_type = "pci";
1204                                   /* configuration space */
1205                         ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000
1206                                   /* downstream I/O */
1207                                   0x81000000 0 0          0x08f80000 0 0x00010000
1208                                   /* non-prefetchable memory */
1209                                   0x82000000 0 0x08000000 0x08000000 0 0x00f00000>;
1210                         num-lanes = <1>;
1211                         interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1212                         clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>,
1213                                  <&clks IMX6SX_CLK_PCIE_AXI>,
1214                                  <&clks IMX6SX_CLK_LVDS1_OUT>,
1215                                  <&clks IMX6SX_CLK_DISPLAY_AXI>;
1216                         clock-names = "pcie_ref_125m", "pcie_axi",
1217                                       "lvds_gate", "display_axi";
1218                         status = "disabled";
1219                 };
1220         };
1221 };