sys/gnu/dts/arm/omap5.dtsi

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  * Based on "omap4.dtsi"
   8  */
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12 #include <dt-bindings/pinctrl/omap.h>
  13
  14 #include "skeleton.dtsi"
  15
  16 / {
  17         #address-cells = <1>;
  18         #size-cells = <1>;
  19
  20         compatible = "ti,omap5";
  21         interrupt-parent = <&gic>;
  22
  23         aliases {
  24                 i2c0 = &i2c1;
  25                 i2c1 = &i2c2;
  26                 i2c2 = &i2c3;
  27                 i2c3 = &i2c4;
  28                 i2c4 = &i2c5;
  29                 serial0 = &uart1;
  30                 serial1 = &uart2;
  31                 serial2 = &uart3;
  32                 serial3 = &uart4;
  33                 serial4 = &uart5;
  34                 serial5 = &uart6;
  35         };
  36
  37         cpus {
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 cpu0: cpu@0 {
  42                         device_type = "cpu";
  43                         compatible = "arm,cortex-a15";
  44                         reg = <0x0>;
  45
  46                         operating-points = <
  47                                 /* kHz    uV */
  48                                 1000000 1060000
  49                                 1500000 1250000
  50                         >;
  51
  52                         clocks = <&dpll_mpu_ck>;
  53                         clock-names = "cpu";
  54
  55                         clock-latency = <300000>; /* From omap-cpufreq driver */
  56
  57                         /* cooling options */
  58                         cooling-min-level = <0>;
  59                         cooling-max-level = <2>;
  60                         #cooling-cells = <2>; /* min followed by max */
  61                 };
  62                 cpu@1 {
  63                         device_type = "cpu";
  64                         compatible = "arm,cortex-a15";
  65                         reg = <0x1>;
  66                 };
  67         };
  68
  69         thermal-zones {
  70                 #include "omap4-cpu-thermal.dtsi"
  71                 #include "omap5-gpu-thermal.dtsi"
  72                 #include "omap5-core-thermal.dtsi"
  73         };
  74
  75         timer {
  76                 compatible = "arm,armv7-timer";
  77                 /* PPI secure/nonsecure IRQ */
  78                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  79                              <GIC_PPI 14 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  80                              <GIC_PPI 11 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>,
  81                              <GIC_PPI 10 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_LOW)>;
  82         };
  83
  84         pmu {
  85                 compatible = "arm,cortex-a15-pmu";
  86                 interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
  87                              <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
  88         };
  89
  90         gic: interrupt-controller@48211000 {
  91                 compatible = "arm,cortex-a15-gic";
  92                 interrupt-controller;
  93                 #interrupt-cells = <3>;
  94                 reg = <0x48211000 0x1000>,
  95                       <0x48212000 0x1000>,
  96                       <0x48214000 0x2000>,
  97                       <0x48216000 0x2000>;
  98         };
  99
 100         /*
 101          * The soc node represents the soc top level view. It is used for IPs
 102          * that are not memory mapped in the MPU view or for the MPU itself.
 103          */
 104         soc {
 105                 compatible = "ti,omap-infra";
 106                 mpu {
 107                         compatible = "ti,omap4-mpu";
 108                         ti,hwmods = "mpu";
 109                         sram = <&ocmcram>;
 110                 };
 111         };
 112
 113         /*
 114          * XXX: Use a flat representation of the OMAP3 interconnect.
 115          * The real OMAP interconnect network is quite complex.
 116          * Since it will not bring real advantage to represent that in DT for
 117          * the moment, just use a fake OCP bus entry to represent the whole bus
 118          * hierarchy.
 119          */
 120         ocp {
 121                 compatible = "ti,omap4-l3-noc", "simple-bus";
 122                 #address-cells = <1>;
 123                 #size-cells = <1>;
 124                 ranges;
 125                 ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 126                 reg = <0x44000000 0x2000>,
 127                       <0x44800000 0x3000>,
 128                       <0x45000000 0x4000>;
 129                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
 130                              <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 131
 132                 prm: prm@4ae06000 {
 133                         compatible = "ti,omap5-prm";
 134                         reg = <0x4ae06000 0x3000>;
 135                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 136
 137                         prm_clocks: clocks {
 138                                 #address-cells = <1>;
 139                                 #size-cells = <0>;
 140                         };
 141
 142                         prm_clockdomains: clockdomains {
 143                         };
 144                 };
 145
 146                 cm_core_aon: cm_core_aon@4a004000 {
 147                         compatible = "ti,omap5-cm-core-aon";
 148                         reg = <0x4a004000 0x2000>;
 149
 150                         cm_core_aon_clocks: clocks {
 151                                 #address-cells = <1>;
 152                                 #size-cells = <0>;
 153                         };
 154
 155                         cm_core_aon_clockdomains: clockdomains {
 156                         };
 157                 };
 158
 159                 scrm: scrm@4ae0a000 {
 160                         compatible = "ti,omap5-scrm";
 161                         reg = <0x4ae0a000 0x2000>;
 162
 163                         scrm_clocks: clocks {
 164                                 #address-cells = <1>;
 165                                 #size-cells = <0>;
 166                         };
 167
 168                         scrm_clockdomains: clockdomains {
 169                         };
 170                 };
 171
 172                 cm_core: cm_core@4a008000 {
 173                         compatible = "ti,omap5-cm-core";
 174                         reg = <0x4a008000 0x3000>;
 175
 176                         cm_core_clocks: clocks {
 177                                 #address-cells = <1>;
 178                                 #size-cells = <0>;
 179                         };
 180
 181                         cm_core_clockdomains: clockdomains {
 182                         };
 183                 };
 184
 185                 counter32k: counter@4ae04000 {
 186                         compatible = "ti,omap-counter32k";
 187                         reg = <0x4ae04000 0x40>;
 188                         ti,hwmods = "counter_32k";
 189                 };
 190
 191                 omap5_pmx_core: pinmux@4a002840 {
 192                         compatible = "ti,omap5-padconf", "pinctrl-single";
 193                         reg = <0x4a002840 0x01b6>;
 194                         #address-cells = <1>;
 195                         #size-cells = <0>;
 196                         #interrupt-cells = <1>;
 197                         interrupt-controller;
 198                         pinctrl-single,register-width = <16>;
 199                         pinctrl-single,function-mask = <0x7fff>;
 200                 };
 201                 omap5_pmx_wkup: pinmux@4ae0c840 {
 202                         compatible = "ti,omap5-padconf", "pinctrl-single";
 203                         reg = <0x4ae0c840 0x0038>;
 204                         #address-cells = <1>;
 205                         #size-cells = <0>;
 206                         #interrupt-cells = <1>;
 207                         interrupt-controller;
 208                         pinctrl-single,register-width = <16>;
 209                         pinctrl-single,function-mask = <0x7fff>;
 210                 };
 211
 212                 omap5_padconf_global: tisyscon@4a002da0 {
 213                         compatible = "syscon";
 214                         reg = <0x4A002da0 0xec>;
 215                 };
 216
 217                 pbias_regulator: pbias_regulator {
 218                         compatible = "ti,pbias-omap";
 219                         reg = <0x60 0x4>;
 220                         syscon = <&omap5_padconf_global>;
 221                         pbias_mmc_reg: pbias_mmc_omap5 {
 222                                 regulator-name = "pbias_mmc_omap5";
 223                                 regulator-min-microvolt = <1800000>;
 224                                 regulator-max-microvolt = <3000000>;
 225                         };
 226                 };
 227
 228                 ocmcram: ocmcram@40300000 {
 229                         compatible = "mmio-sram";
 230                         reg = <0x40300000 0x20000>; /* 128k */
 231                 };
 232
 233                 sdma: dma-controller@4a056000 {
 234                         compatible = "ti,omap4430-sdma";
 235                         reg = <0x4a056000 0x1000>;
 236                         interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 237                                      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
 238                                      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
 239                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 240                         #dma-cells = <1>;
 241                         #dma-channels = <32>;
 242                         #dma-requests = <127>;
 243                 };
 244
 245                 gpio1: gpio@4ae10000 {
 246                         compatible = "ti,omap4-gpio";
 247                         reg = <0x4ae10000 0x200>;
 248                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 249                         ti,hwmods = "gpio1";
 250                         ti,gpio-always-on;
 251                         gpio-controller;
 252                         #gpio-cells = <2>;
 253                         interrupt-controller;
 254                         #interrupt-cells = <2>;
 255                 };
 256
 257                 gpio2: gpio@48055000 {
 258                         compatible = "ti,omap4-gpio";
 259                         reg = <0x48055000 0x200>;
 260                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 261                         ti,hwmods = "gpio2";
 262                         gpio-controller;
 263                         #gpio-cells = <2>;
 264                         interrupt-controller;
 265                         #interrupt-cells = <2>;
 266                 };
 267
 268                 gpio3: gpio@48057000 {
 269                         compatible = "ti,omap4-gpio";
 270                         reg = <0x48057000 0x200>;
 271                         interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 272                         ti,hwmods = "gpio3";
 273                         gpio-controller;
 274                         #gpio-cells = <2>;
 275                         interrupt-controller;
 276                         #interrupt-cells = <2>;
 277                 };
 278
 279                 gpio4: gpio@48059000 {
 280                         compatible = "ti,omap4-gpio";
 281                         reg = <0x48059000 0x200>;
 282                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 283                         ti,hwmods = "gpio4";
 284                         gpio-controller;
 285                         #gpio-cells = <2>;
 286                         interrupt-controller;
 287                         #interrupt-cells = <2>;
 288                 };
 289
 290                 gpio5: gpio@4805b000 {
 291                         compatible = "ti,omap4-gpio";
 292                         reg = <0x4805b000 0x200>;
 293                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 294                         ti,hwmods = "gpio5";
 295                         gpio-controller;
 296                         #gpio-cells = <2>;
 297                         interrupt-controller;
 298                         #interrupt-cells = <2>;
 299                 };
 300
 301                 gpio6: gpio@4805d000 {
 302                         compatible = "ti,omap4-gpio";
 303                         reg = <0x4805d000 0x200>;
 304                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 305                         ti,hwmods = "gpio6";
 306                         gpio-controller;
 307                         #gpio-cells = <2>;
 308                         interrupt-controller;
 309                         #interrupt-cells = <2>;
 310                 };
 311
 312                 gpio7: gpio@48051000 {
 313                         compatible = "ti,omap4-gpio";
 314                         reg = <0x48051000 0x200>;
 315                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 316                         ti,hwmods = "gpio7";
 317                         gpio-controller;
 318                         #gpio-cells = <2>;
 319                         interrupt-controller;
 320                         #interrupt-cells = <2>;
 321                 };
 322
 323                 gpio8: gpio@48053000 {
 324                         compatible = "ti,omap4-gpio";
 325                         reg = <0x48053000 0x200>;
 326                         interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 327                         ti,hwmods = "gpio8";
 328                         gpio-controller;
 329                         #gpio-cells = <2>;
 330                         interrupt-controller;
 331                         #interrupt-cells = <2>;
 332                 };
 333
 334                 gpmc: gpmc@50000000 {
 335                         compatible = "ti,omap4430-gpmc";
 336                         reg = <0x50000000 0x1000>;
 337                         #address-cells = <2>;
 338                         #size-cells = <1>;
 339                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 340                         gpmc,num-cs = <8>;
 341                         gpmc,num-waitpins = <4>;
 342                         ti,hwmods = "gpmc";
 343                         clocks = <&l3_iclk_div>;
 344                         clock-names = "fck";
 345                 };
 346
 347                 i2c1: i2c@48070000 {
 348                         compatible = "ti,omap4-i2c";
 349                         reg = <0x48070000 0x100>;
 350                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 351                         #address-cells = <1>;
 352                         #size-cells = <0>;
 353                         ti,hwmods = "i2c1";
 354                 };
 355
 356                 i2c2: i2c@48072000 {
 357                         compatible = "ti,omap4-i2c";
 358                         reg = <0x48072000 0x100>;
 359                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 360                         #address-cells = <1>;
 361                         #size-cells = <0>;
 362                         ti,hwmods = "i2c2";
 363                 };
 364
 365                 i2c3: i2c@48060000 {
 366                         compatible = "ti,omap4-i2c";
 367                         reg = <0x48060000 0x100>;
 368                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 369                         #address-cells = <1>;
 370                         #size-cells = <0>;
 371                         ti,hwmods = "i2c3";
 372                 };
 373
 374                 i2c4: i2c@4807a000 {
 375                         compatible = "ti,omap4-i2c";
 376                         reg = <0x4807a000 0x100>;
 377                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 378                         #address-cells = <1>;
 379                         #size-cells = <0>;
 380                         ti,hwmods = "i2c4";
 381                 };
 382
 383                 i2c5: i2c@4807c000 {
 384                         compatible = "ti,omap4-i2c";
 385                         reg = <0x4807c000 0x100>;
 386                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 387                         #address-cells = <1>;
 388                         #size-cells = <0>;
 389                         ti,hwmods = "i2c5";
 390                 };
 391
 392                 hwspinlock: spinlock@4a0f6000 {
 393                         compatible = "ti,omap4-hwspinlock";
 394                         reg = <0x4a0f6000 0x1000>;
 395                         ti,hwmods = "spinlock";
 396                         #hwlock-cells = <1>;
 397                 };
 398
 399                 mcspi1: spi@48098000 {
 400                         compatible = "ti,omap4-mcspi";
 401                         reg = <0x48098000 0x200>;
 402                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 403                         #address-cells = <1>;
 404                         #size-cells = <0>;
 405                         ti,hwmods = "mcspi1";
 406                         ti,spi-num-cs = <4>;
 407                         dmas = <&sdma 35>,
 408                                <&sdma 36>,
 409                                <&sdma 37>,
 410                                <&sdma 38>,
 411                                <&sdma 39>,
 412                                <&sdma 40>,
 413                                <&sdma 41>,
 414                                <&sdma 42>;
 415                         dma-names = "tx0", "rx0", "tx1", "rx1",
 416                                     "tx2", "rx2", "tx3", "rx3";
 417                 };
 418
 419                 mcspi2: spi@4809a000 {
 420                         compatible = "ti,omap4-mcspi";
 421                         reg = <0x4809a000 0x200>;
 422                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 423                         #address-cells = <1>;
 424                         #size-cells = <0>;
 425                         ti,hwmods = "mcspi2";
 426                         ti,spi-num-cs = <2>;
 427                         dmas = <&sdma 43>,
 428                                <&sdma 44>,
 429                                <&sdma 45>,
 430                                <&sdma 46>;
 431                         dma-names = "tx0", "rx0", "tx1", "rx1";
 432                 };
 433
 434                 mcspi3: spi@480b8000 {
 435                         compatible = "ti,omap4-mcspi";
 436                         reg = <0x480b8000 0x200>;
 437                         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
 438                         #address-cells = <1>;
 439                         #size-cells = <0>;
 440                         ti,hwmods = "mcspi3";
 441                         ti,spi-num-cs = <2>;
 442                         dmas = <&sdma 15>, <&sdma 16>;
 443                         dma-names = "tx0", "rx0";
 444                 };
 445
 446                 mcspi4: spi@480ba000 {
 447                         compatible = "ti,omap4-mcspi";
 448                         reg = <0x480ba000 0x200>;
 449                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 450                         #address-cells = <1>;
 451                         #size-cells = <0>;
 452                         ti,hwmods = "mcspi4";
 453                         ti,spi-num-cs = <1>;
 454                         dmas = <&sdma 70>, <&sdma 71>;
 455                         dma-names = "tx0", "rx0";
 456                 };
 457
 458                 uart1: serial@4806a000 {
 459                         compatible = "ti,omap4-uart";
 460                         reg = <0x4806a000 0x100>;
 461                         interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 462                         ti,hwmods = "uart1";
 463                         clock-frequency = <48000000>;
 464                 };
 465
 466                 uart2: serial@4806c000 {
 467                         compatible = "ti,omap4-uart";
 468                         reg = <0x4806c000 0x100>;
 469                         interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 470                         ti,hwmods = "uart2";
 471                         clock-frequency = <48000000>;
 472                 };
 473
 474                 uart3: serial@48020000 {
 475                         compatible = "ti,omap4-uart";
 476                         reg = <0x48020000 0x100>;
 477                         interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 478                         ti,hwmods = "uart3";
 479                         clock-frequency = <48000000>;
 480                 };
 481
 482                 uart4: serial@4806e000 {
 483                         compatible = "ti,omap4-uart";
 484                         reg = <0x4806e000 0x100>;
 485                         interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 486                         ti,hwmods = "uart4";
 487                         clock-frequency = <48000000>;
 488                 };
 489
 490                 uart5: serial@48066000 {
 491                         compatible = "ti,omap4-uart";
 492                         reg = <0x48066000 0x100>;
 493                         interrupts-extended = <&gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 494                         ti,hwmods = "uart5";
 495                         clock-frequency = <48000000>;
 496                 };
 497
 498                 uart6: serial@48068000 {
 499                         compatible = "ti,omap4-uart";
 500                         reg = <0x48068000 0x100>;
 501                         interrupts-extended = <&gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 502                         ti,hwmods = "uart6";
 503                         clock-frequency = <48000000>;
 504                 };
 505
 506                 mmc1: mmc@4809c000 {
 507                         compatible = "ti,omap4-hsmmc";
 508                         reg = <0x4809c000 0x400>;
 509                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 510                         ti,hwmods = "mmc1";
 511                         ti,dual-volt;
 512                         ti,needs-special-reset;
 513                         dmas = <&sdma 61>, <&sdma 62>;
 514                         dma-names = "tx", "rx";
 515                         pbias-supply = <&pbias_mmc_reg>;
 516                 };
 517
 518                 mmc2: mmc@480b4000 {
 519                         compatible = "ti,omap4-hsmmc";
 520                         reg = <0x480b4000 0x400>;
 521                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 522                         ti,hwmods = "mmc2";
 523                         ti,needs-special-reset;
 524                         dmas = <&sdma 47>, <&sdma 48>;
 525                         dma-names = "tx", "rx";
 526                 };
 527
 528                 mmc3: mmc@480ad000 {
 529                         compatible = "ti,omap4-hsmmc";
 530                         reg = <0x480ad000 0x400>;
 531                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 532                         ti,hwmods = "mmc3";
 533                         ti,needs-special-reset;
 534                         dmas = <&sdma 77>, <&sdma 78>;
 535                         dma-names = "tx", "rx";
 536                 };
 537
 538                 mmc4: mmc@480d1000 {
 539                         compatible = "ti,omap4-hsmmc";
 540                         reg = <0x480d1000 0x400>;
 541                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 542                         ti,hwmods = "mmc4";
 543                         ti,needs-special-reset;
 544                         dmas = <&sdma 57>, <&sdma 58>;
 545                         dma-names = "tx", "rx";
 546                 };
 547
 548                 mmc5: mmc@480d5000 {
 549                         compatible = "ti,omap4-hsmmc";
 550                         reg = <0x480d5000 0x400>;
 551                         interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 552                         ti,hwmods = "mmc5";
 553                         ti,needs-special-reset;
 554                         dmas = <&sdma 59>, <&sdma 60>;
 555                         dma-names = "tx", "rx";
 556                 };
 557
 558                 mmu_dsp: mmu@4a066000 {
 559                         compatible = "ti,omap4-iommu";
 560                         reg = <0x4a066000 0x100>;
 561                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 562                         ti,hwmods = "mmu_dsp";
 563                 };
 564
 565                 mmu_ipu: mmu@55082000 {
 566                         compatible = "ti,omap4-iommu";
 567                         reg = <0x55082000 0x100>;
 568                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 569                         ti,hwmods = "mmu_ipu";
 570                         ti,iommu-bus-err-back;
 571                 };
 572
 573                 keypad: keypad@4ae1c000 {
 574                         compatible = "ti,omap4-keypad";
 575                         reg = <0x4ae1c000 0x400>;
 576                         ti,hwmods = "kbd";
 577                 };
 578
 579                 mcpdm: mcpdm@40132000 {
 580                         compatible = "ti,omap4-mcpdm";
 581                         reg = <0x40132000 0x7f>, /* MPU private access */
 582                               <0x49032000 0x7f>; /* L3 Interconnect */
 583                         reg-names = "mpu", "dma";
 584                         interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 585                         ti,hwmods = "mcpdm";
 586                         dmas = <&sdma 65>,
 587                                <&sdma 66>;
 588                         dma-names = "up_link", "dn_link";
 589                         status = "disabled";
 590                 };
 591
 592                 dmic: dmic@4012e000 {
 593                         compatible = "ti,omap4-dmic";
 594                         reg = <0x4012e000 0x7f>, /* MPU private access */
 595                               <0x4902e000 0x7f>; /* L3 Interconnect */
 596                         reg-names = "mpu", "dma";
 597                         interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 598                         ti,hwmods = "dmic";
 599                         dmas = <&sdma 67>;
 600                         dma-names = "up_link";
 601                         status = "disabled";
 602                 };
 603
 604                 mcbsp1: mcbsp@40122000 {
 605                         compatible = "ti,omap4-mcbsp";
 606                         reg = <0x40122000 0xff>, /* MPU private access */
 607                               <0x49022000 0xff>; /* L3 Interconnect */
 608                         reg-names = "mpu", "dma";
 609                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 610                         interrupt-names = "common";
 611                         ti,buffer-size = <128>;
 612                         ti,hwmods = "mcbsp1";
 613                         dmas = <&sdma 33>,
 614                                <&sdma 34>;
 615                         dma-names = "tx", "rx";
 616                         status = "disabled";
 617                 };
 618
 619                 mcbsp2: mcbsp@40124000 {
 620                         compatible = "ti,omap4-mcbsp";
 621                         reg = <0x40124000 0xff>, /* MPU private access */
 622                               <0x49024000 0xff>; /* L3 Interconnect */
 623                         reg-names = "mpu", "dma";
 624                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 625                         interrupt-names = "common";
 626                         ti,buffer-size = <128>;
 627                         ti,hwmods = "mcbsp2";
 628                         dmas = <&sdma 17>,
 629                                <&sdma 18>;
 630                         dma-names = "tx", "rx";
 631                         status = "disabled";
 632                 };
 633
 634                 mcbsp3: mcbsp@40126000 {
 635                         compatible = "ti,omap4-mcbsp";
 636                         reg = <0x40126000 0xff>, /* MPU private access */
 637                               <0x49026000 0xff>; /* L3 Interconnect */
 638                         reg-names = "mpu", "dma";
 639                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 640                         interrupt-names = "common";
 641                         ti,buffer-size = <128>;
 642                         ti,hwmods = "mcbsp3";
 643                         dmas = <&sdma 19>,
 644                                <&sdma 20>;
 645                         dma-names = "tx", "rx";
 646                         status = "disabled";
 647                 };
 648
 649                 mailbox: mailbox@4a0f4000 {
 650                         compatible = "ti,omap4-mailbox";
 651                         reg = <0x4a0f4000 0x200>;
 652                         interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 653                         ti,hwmods = "mailbox";
 654                         #mbox-cells = <1>;
 655                         ti,mbox-num-users = <3>;
 656                         ti,mbox-num-fifos = <8>;
 657                         mbox_ipu: mbox_ipu {
 658                                 ti,mbox-tx = <0 0 0>;
 659                                 ti,mbox-rx = <1 0 0>;
 660                         };
 661                         mbox_dsp: mbox_dsp {
 662                                 ti,mbox-tx = <3 0 0>;
 663                                 ti,mbox-rx = <2 0 0>;
 664                         };
 665                 };
 666
 667                 timer1: timer@4ae18000 {
 668                         compatible = "ti,omap5430-timer";
 669                         reg = <0x4ae18000 0x80>;
 670                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 671                         ti,hwmods = "timer1";
 672                         ti,timer-alwon;
 673                 };
 674
 675                 timer2: timer@48032000 {
 676                         compatible = "ti,omap5430-timer";
 677                         reg = <0x48032000 0x80>;
 678                         interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 679                         ti,hwmods = "timer2";
 680                 };
 681
 682                 timer3: timer@48034000 {
 683                         compatible = "ti,omap5430-timer";
 684                         reg = <0x48034000 0x80>;
 685                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 686                         ti,hwmods = "timer3";
 687                 };
 688
 689                 timer4: timer@48036000 {
 690                         compatible = "ti,omap5430-timer";
 691                         reg = <0x48036000 0x80>;
 692                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 693                         ti,hwmods = "timer4";
 694                 };
 695
 696                 timer5: timer@40138000 {
 697                         compatible = "ti,omap5430-timer";
 698                         reg = <0x40138000 0x80>,
 699                               <0x49038000 0x80>;
 700                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 701                         ti,hwmods = "timer5";
 702                         ti,timer-dsp;
 703                         ti,timer-pwm;
 704                 };
 705
 706                 timer6: timer@4013a000 {
 707                         compatible = "ti,omap5430-timer";
 708                         reg = <0x4013a000 0x80>,
 709                               <0x4903a000 0x80>;
 710                         interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 711                         ti,hwmods = "timer6";
 712                         ti,timer-dsp;
 713                         ti,timer-pwm;
 714                 };
 715
 716                 timer7: timer@4013c000 {
 717                         compatible = "ti,omap5430-timer";
 718                         reg = <0x4013c000 0x80>,
 719                               <0x4903c000 0x80>;
 720                         interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 721                         ti,hwmods = "timer7";
 722                         ti,timer-dsp;
 723                 };
 724
 725                 timer8: timer@4013e000 {
 726                         compatible = "ti,omap5430-timer";
 727                         reg = <0x4013e000 0x80>,
 728                               <0x4903e000 0x80>;
 729                         interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 730                         ti,hwmods = "timer8";
 731                         ti,timer-dsp;
 732                         ti,timer-pwm;
 733                 };
 734
 735                 timer9: timer@4803e000 {
 736                         compatible = "ti,omap5430-timer";
 737                         reg = <0x4803e000 0x80>;
 738                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 739                         ti,hwmods = "timer9";
 740                         ti,timer-pwm;
 741                 };
 742
 743                 timer10: timer@48086000 {
 744                         compatible = "ti,omap5430-timer";
 745                         reg = <0x48086000 0x80>;
 746                         interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 747                         ti,hwmods = "timer10";
 748                         ti,timer-pwm;
 749                 };
 750
 751                 timer11: timer@48088000 {
 752                         compatible = "ti,omap5430-timer";
 753                         reg = <0x48088000 0x80>;
 754                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 755                         ti,hwmods = "timer11";
 756                         ti,timer-pwm;
 757                 };
 758
 759                 wdt2: wdt@4ae14000 {
 760                         compatible = "ti,omap5-wdt", "ti,omap3-wdt";
 761                         reg = <0x4ae14000 0x80>;
 762                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 763                         ti,hwmods = "wd_timer2";
 764                 };
 765
 766                 dmm@4e000000 {
 767                         compatible = "ti,omap5-dmm";
 768                         reg = <0x4e000000 0x800>;
 769                         interrupts = <0 113 0x4>;
 770                         ti,hwmods = "dmm";
 771                 };
 772
 773                 emif1: emif@4c000000 {
 774                         compatible      = "ti,emif-4d5";
 775                         ti,hwmods       = "emif1";
 776                         ti,no-idle-on-init;
 777                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 778                         reg = <0x4c000000 0x400>;
 779                         interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 780                         hw-caps-read-idle-ctrl;
 781                         hw-caps-ll-interface;
 782                         hw-caps-temp-alert;
 783                 };
 784
 785                 emif2: emif@4d000000 {
 786                         compatible      = "ti,emif-4d5";
 787                         ti,hwmods       = "emif2";
 788                         ti,no-idle-on-init;
 789                         phy-type        = <2>; /* DDR PHY type: Intelli PHY */
 790                         reg = <0x4d000000 0x400>;
 791                         interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
 792                         hw-caps-read-idle-ctrl;
 793                         hw-caps-ll-interface;
 794                         hw-caps-temp-alert;
 795                 };
 796
 797                 omap_control_usb2phy: control-phy@4a002300 {
 798                         compatible = "ti,control-phy-usb2";
 799                         reg = <0x4a002300 0x4>;
 800                         reg-names = "power";
 801                 };
 802
 803                 omap_control_usb3phy: control-phy@4a002370 {
 804                         compatible = "ti,control-phy-pipe3";
 805                         reg = <0x4a002370 0x4>;
 806                         reg-names = "power";
 807                 };
 808
 809                 usb3: omap_dwc3@4a020000 {
 810                         compatible = "ti,dwc3";
 811                         ti,hwmods = "usb_otg_ss";
 812                         reg = <0x4a020000 0x10000>;
 813                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 814                         #address-cells = <1>;
 815                         #size-cells = <1>;
 816                         utmi-mode = <2>;
 817                         ranges;
 818                         dwc3@4a030000 {
 819                                 compatible = "snps,dwc3";
 820                                 reg = <0x4a030000 0x10000>;
 821                                 interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 822                                 phys = <&usb2_phy>, <&usb3_phy>;
 823                                 phy-names = "usb2-phy", "usb3-phy";
 824                                 dr_mode = "peripheral";
 825                                 tx-fifo-resize;
 826                         };
 827                 };
 828
 829                 ocp2scp@4a080000 {
 830                         compatible = "ti,omap-ocp2scp";
 831                         #address-cells = <1>;
 832                         #size-cells = <1>;
 833                         reg = <0x4a080000 0x20>;
 834                         ranges;
 835                         ti,hwmods = "ocp2scp1";
 836                         usb2_phy: usb2phy@4a084000 {
 837                                 compatible = "ti,omap-usb2";
 838                                 reg = <0x4a084000 0x7c>;
 839                                 ctrl-module = <&omap_control_usb2phy>;
 840                                 clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>;
 841                                 clock-names = "wkupclk", "refclk";
 842                                 #phy-cells = <0>;
 843                         };
 844
 845                         usb3_phy: usb3phy@4a084400 {
 846                                 compatible = "ti,omap-usb3";
 847                                 reg = <0x4a084400 0x80>,
 848                                       <0x4a084800 0x64>,
 849                                       <0x4a084c00 0x40>;
 850                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 851                                 ctrl-module = <&omap_control_usb3phy>;
 852                                 clocks = <&usb_phy_cm_clk32k>,
 853                                          <&sys_clkin>,
 854                                          <&usb_otg_ss_refclk960m>;
 855                                 clock-names =   "wkupclk",
 856                                                 "sysclk",
 857                                                 "refclk";
 858                                 #phy-cells = <0>;
 859                         };
 860                 };
 861
 862                 usbhstll: usbhstll@4a062000 {
 863                         compatible = "ti,usbhs-tll";
 864                         reg = <0x4a062000 0x1000>;
 865                         interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 866                         ti,hwmods = "usb_tll_hs";
 867                 };
 868
 869                 usbhshost: usbhshost@4a064000 {
 870                         compatible = "ti,usbhs-host";
 871                         reg = <0x4a064000 0x800>;
 872                         ti,hwmods = "usb_host_hs";
 873                         #address-cells = <1>;
 874                         #size-cells = <1>;
 875                         ranges;
 876                         clocks = <&l3init_60m_fclk>,
 877                                  <&xclk60mhsp1_ck>,
 878                                  <&xclk60mhsp2_ck>;
 879                         clock-names = "refclk_60m_int",
 880                                       "refclk_60m_ext_p1",
 881                                       "refclk_60m_ext_p2";
 882
 883                         usbhsohci: ohci@4a064800 {
 884                                 compatible = "ti,ohci-omap3";
 885                                 reg = <0x4a064800 0x400>;
 886                                 interrupt-parent = <&gic>;
 887                                 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 888                         };
 889
 890                         usbhsehci: ehci@4a064c00 {
 891                                 compatible = "ti,ehci-omap";
 892                                 reg = <0x4a064c00 0x400>;
 893                                 interrupt-parent = <&gic>;
 894                                 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 895                         };
 896                 };
 897
 898                 bandgap: bandgap@4a0021e0 {
 899                         reg = <0x4a0021e0 0xc
 900                                0x4a00232c 0xc
 901                                0x4a002380 0x2c
 902                                0x4a0023C0 0x3c>;
 903                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 904                         compatible = "ti,omap5430-bandgap";
 905
 906                         #thermal-sensor-cells = <1>;
 907                 };
 908
 909                 omap_control_sata: control-phy@4a002374 {
 910                         compatible = "ti,control-phy-pipe3";
 911                         reg = <0x4a002374 0x4>;
 912                         reg-names = "power";
 913                         clocks = <&sys_clkin>;
 914                         clock-names = "sysclk";
 915                 };
 916
 917                 /* OCP2SCP3 */
 918                 ocp2scp@4a090000 {
 919                         compatible = "ti,omap-ocp2scp";
 920                         #address-cells = <1>;
 921                         #size-cells = <1>;
 922                         reg = <0x4a090000 0x20>;
 923                         ranges;
 924                         ti,hwmods = "ocp2scp3";
 925                         sata_phy: phy@4a096000 {
 926                                 compatible = "ti,phy-pipe3-sata";
 927                                 reg = <0x4A096000 0x80>, /* phy_rx */
 928                                       <0x4A096400 0x64>, /* phy_tx */
 929                                       <0x4A096800 0x40>; /* pll_ctrl */
 930                                 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
 931                                 ctrl-module = <&omap_control_sata>;
 932                                 clocks = <&sys_clkin>;
 933                                 clock-names = "sysclk";
 934                                 #phy-cells = <0>;
 935                         };
 936                 };
 937
 938                 sata: sata@4a141100 {
 939                         compatible = "snps,dwc-ahci";
 940                         reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
 941                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 942                         phys = <&sata_phy>;
 943                         phy-names = "sata-phy";
 944                         clocks = <&sata_ref_clk>;
 945                         ti,hwmods = "sata";
 946                 };
 947
 948                 dss: dss@58000000 {
 949                         compatible = "ti,omap5-dss";
 950                         reg = <0x58000000 0x80>;
 951                         status = "disabled";
 952                         ti,hwmods = "dss_core";
 953                         clocks = <&dss_dss_clk>;
 954                         clock-names = "fck";
 955                         #address-cells = <1>;
 956                         #size-cells = <1>;
 957                         ranges;
 958
 959                         dispc@58001000 {
 960                                 compatible = "ti,omap5-dispc";
 961                                 reg = <0x58001000 0x1000>;
 962                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 963                                 ti,hwmods = "dss_dispc";
 964                                 clocks = <&dss_dss_clk>;
 965                                 clock-names = "fck";
 966                         };
 967
 968                         rfbi: encoder@58002000  {
 969                                 compatible = "ti,omap5-rfbi";
 970                                 reg = <0x58002000 0x100>;
 971                                 status = "disabled";
 972                                 ti,hwmods = "dss_rfbi";
 973                                 clocks = <&dss_dss_clk>, <&l3_iclk_div>;
 974                                 clock-names = "fck", "ick";
 975                         };
 976
 977                         dsi1: encoder@58004000 {
 978                                 compatible = "ti,omap5-dsi";
 979                                 reg = <0x58004000 0x200>,
 980                                       <0x58004200 0x40>,
 981                                       <0x58004300 0x40>;
 982                                 reg-names = "proto", "phy", "pll";
 983                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 984                                 status = "disabled";
 985                                 ti,hwmods = "dss_dsi1";
 986                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
 987                                 clock-names = "fck", "sys_clk";
 988                         };
 989
 990                         dsi2: encoder@58005000 {
 991                                 compatible = "ti,omap5-dsi";
 992                                 reg = <0x58009000 0x200>,
 993                                       <0x58009200 0x40>,
 994                                       <0x58009300 0x40>;
 995                                 reg-names = "proto", "phy", "pll";
 996                                 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 997                                 status = "disabled";
 998                                 ti,hwmods = "dss_dsi2";
 999                                 clocks = <&dss_dss_clk>, <&dss_sys_clk>;
1000                                 clock-names = "fck", "sys_clk";
1001                         };
1002
1003                         hdmi: encoder@58060000 {
1004                                 compatible = "ti,omap5-hdmi";
1005                                 reg = <0x58040000 0x200>,
1006                                       <0x58040200 0x80>,
1007                                       <0x58040300 0x80>,
1008                                       <0x58060000 0x19000>;
1009                                 reg-names = "wp", "pll", "phy", "core";
1010                                 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
1011                                 status = "disabled";
1012                                 ti,hwmods = "dss_hdmi";
1013                                 clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
1014                                 clock-names = "fck", "sys_clk";
1015                                 dmas = <&sdma 76>;
1016                                 dma-names = "audio_tx";
1017                         };
1018                 };
1019
1020                 abb_mpu: regulator-abb-mpu {
1021                         compatible = "ti,abb-v2";
1022                         regulator-name = "abb_mpu";
1023                         #address-cells = <0>;
1024                         #size-cells = <0>;
1025                         clocks = <&sys_clkin>;
1026                         ti,settling-time = <50>;
1027                         ti,clock-cycles = <16>;
1028
1029                         reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
1030                               <0x4a0021c4 0x8>, <0x4ae0c318 0x4>;
1031                         reg-names = "base-address", "int-address",
1032                                     "efuse-address", "ldo-address";
1033                         ti,tranxdone-status-mask = <0x80>;
1034                         /* LDOVBBMPU_MUX_CTRL */
1035                         ti,ldovbb-override-mask = <0x400>;
1036                         /* LDOVBBMPU_VSET_OUT */
1037                         ti,ldovbb-vset-mask = <0x1F>;
1038
1039                         /*
1040                          * NOTE: only FBB mode used but actual vset will
1041                          * determine final biasing
1042                          */
1043                         ti,abb_info = <
1044                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1045                         1060000         0       0x0     0 0x02000000 0x01F00000
1046                         1250000         0       0x4     0 0x02000000 0x01F00000
1047                         >;
1048                 };
1049
1050                 abb_mm: regulator-abb-mm {
1051                         compatible = "ti,abb-v2";
1052                         regulator-name = "abb_mm";
1053                         #address-cells = <0>;
1054                         #size-cells = <0>;
1055                         clocks = <&sys_clkin>;
1056                         ti,settling-time = <50>;
1057                         ti,clock-cycles = <16>;
1058
1059                         reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
1060                               <0x4a0021a4 0x8>, <0x4ae0c314 0x4>;
1061                         reg-names = "base-address", "int-address",
1062                                     "efuse-address", "ldo-address";
1063                         ti,tranxdone-status-mask = <0x80000000>;
1064                         /* LDOVBBMM_MUX_CTRL */
1065                         ti,ldovbb-override-mask = <0x400>;
1066                         /* LDOVBBMM_VSET_OUT */
1067                         ti,ldovbb-vset-mask = <0x1F>;
1068
1069                         /*
1070                          * NOTE: only FBB mode used but actual vset will
1071                          * determine final biasing
1072                          */
1073                         ti,abb_info = <
1074                         /*uV            ABB     efuse   rbb_m fbb_m     vset_m*/
1075                         1025000         0       0x0     0 0x02000000 0x01F00000
1076                         1120000         0       0x4     0 0x02000000 0x01F00000
1077                         >;
1078                 };
1079         };
1080 };
1081
1082 /include/ "omap54xx-clocks.dtsi"