sys/gnu/dts/arm/ste-snowball.dts

   1 /*
   2  * Copyright 2011 ST-Ericsson AB
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /dts-v1/;
  13 #include "ste-dbx5x0.dtsi"
  14 #include "ste-href-ab8500.dtsi"
  15 #include "ste-href-family-pinctrl.dtsi"
  16
  17 / {
  18         model = "Calao Systems Snowball platform with device tree";
  19         compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
  20
  21         memory {
  22                 reg = <0x00000000 0x20000000>;
  23         };
  24
  25         en_3v3_reg: en_3v3 {
  26                 compatible = "regulator-fixed";
  27                 regulator-name = "en-3v3-fixed-supply";
  28                 regulator-min-microvolt = <3300000>;
  29                 regulator-max-microvolt = <3300000>;
  30                 /* AB8500 GPIOs start from 1 - offset 25 is GPIO26. */
  31                 gpio = <&ab8500_gpio 25 0x4>;
  32                 startup-delay-us = <5000>;
  33                 enable-active-high;
  34         };
  35
  36         gpio_keys {
  37                 compatible = "gpio-keys";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 button@1 {
  42                         debounce_interval = <50>;
  43                         wakeup = <1>;
  44                         linux,code = <2>;
  45                         label = "userpb";
  46                         gpios = <&gpio1 0 0x4>;
  47                 };
  48                 button@2 {
  49                         debounce_interval = <50>;
  50                         wakeup = <1>;
  51                         linux,code = <3>;
  52                         label = "extkb1";
  53                         gpios = <&gpio4 23 0x4>;
  54                 };
  55                 button@3 {
  56                         debounce_interval = <50>;
  57                         wakeup = <1>;
  58                         linux,code = <4>;
  59                         label = "extkb2";
  60                         gpios = <&gpio4 24 0x4>;
  61                 };
  62                 button@4 {
  63                         debounce_interval = <50>;
  64                         wakeup = <1>;
  65                         linux,code = <5>;
  66                         label = "extkb3";
  67                         gpios = <&gpio5 1 0x4>;
  68                 };
  69                 button@5 {
  70                         debounce_interval = <50>;
  71                         wakeup = <1>;
  72                         linux,code = <6>;
  73                         label = "extkb4";
  74                         gpios = <&gpio5 2 0x4>;
  75                 };
  76         };
  77
  78         leds {
  79                 compatible = "gpio-leds";
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&gpioled_snowball_mode>;
  82                 used-led {
  83                         label = "user_led";
  84                         gpios = <&gpio4 14 0x4>;
  85                         default-state = "on";
  86                         linux,default-trigger = "heartbeat";
  87                 };
  88         };
  89
  90         soc {
  91                 usb_per5@a03e0000 {
  92                         pinctrl-names = "default", "sleep";
  93                         pinctrl-0 = <&musb_default_mode>;
  94                         pinctrl-1 = <&musb_sleep_mode>;
  95                 };
  96
  97                 sound {
  98                         compatible = "stericsson,snd-soc-mop500";
  99
 100                         stericsson,cpu-dai = <&msp1 &msp3>;
 101                         stericsson,audio-codec = <&codec>;
 102                 };
 103
 104                 msp0: msp@80123000 {
 105                         pinctrl-names = "default";
 106                         pinctrl-0 = <&msp0_default_mode>;
 107                         status = "okay";
 108                 };
 109
 110                 msp1: msp@80124000 {
 111                         pinctrl-names = "default";
 112                         pinctrl-0 = <&msp1_default_mode>;
 113                         status = "okay";
 114                 };
 115
 116                 msp2: msp@80117000 {
 117                         pinctrl-names = "default";
 118                         pinctrl-0 = <&msp2_default_mode>;
 119                 };
 120
 121                 msp3: msp@80125000 {
 122                         status = "okay";
 123                 };
 124
 125                 external-bus@50000000 {
 126                         status = "okay";
 127
 128                         ethernet@0 {
 129                                 compatible = "smsc,lan9115";
 130                                 reg = <0 0x10000>;
 131                                 interrupts = <12 IRQ_TYPE_EDGE_RISING>;
 132                                 interrupt-parent = <&gpio4>;
 133                                 vdd33a-supply = <&en_3v3_reg>;
 134                                 vddvario-supply = <&db8500_vape_reg>;
 135                                 pinctrl-names = "default";
 136                                 pinctrl-0 = <&eth_snowball_mode>;
 137
 138                                 reg-shift = <1>;
 139                                 reg-io-width = <2>;
 140                                 smsc,force-internal-phy;
 141                                 smsc,irq-active-high;
 142                                 smsc,irq-push-pull;
 143
 144                                 clocks = <&prcc_pclk 3 0>;
 145                         };
 146                 };
 147
 148                 vmmci: regulator-gpio {
 149                         gpios = <&gpio7 4 0x4>;
 150                         enable-gpio = <&gpio6 25 0x4>;
 151                 };
 152
 153                 // External Micro SD slot
 154                 sdi0_per1@80126000 {
 155                         arm,primecell-periphid = <0x10480180>;
 156                         max-frequency = <100000000>;
 157                         bus-width = <4>;
 158                         cap-mmc-highspeed;
 159                         vmmc-supply = <&ab8500_ldo_aux3_reg>;
 160                         vqmmc-supply = <&vmmci>;
 161                         pinctrl-names = "default", "sleep";
 162                         pinctrl-0 = <&sdi0_default_mode>;
 163                         pinctrl-1 = <&sdi0_sleep_mode>;
 164
 165                         cd-gpios  = <&gpio6 26 0x4>; // 218
 166                         cd-inverted;
 167
 168                         status = "okay";
 169                 };
 170
 171                 // WLAN SDIO channel
 172                 sdi1_per2@80118000 {
 173                         arm,primecell-periphid = <0x10480180>;
 174                         max-frequency = <100000000>;
 175                         bus-width = <4>;
 176                         pinctrl-names = "default", "sleep";
 177                         pinctrl-0 = <&sdi1_default_mode>;
 178                         pinctrl-1 = <&sdi1_sleep_mode>;
 179
 180                         status = "okay";
 181                 };
 182
 183                 // Unused PoP eMMC - register and put it to sleep by default */
 184                 sdi2_per3@80005000 {
 185                         arm,primecell-periphid = <0x10480180>;
 186                         pinctrl-names = "default";
 187                         pinctrl-0 = <&sdi2_sleep_mode>;
 188
 189                         status = "okay";
 190                 };
 191
 192                 // On-board eMMC
 193                 sdi4_per2@80114000 {
 194                         arm,primecell-periphid = <0x10480180>;
 195                         max-frequency = <100000000>;
 196                         bus-width = <8>;
 197                         cap-mmc-highspeed;
 198                         vmmc-supply = <&ab8500_ldo_aux2_reg>;
 199                         pinctrl-names = "default", "sleep";
 200                         pinctrl-0 = <&sdi4_default_mode>;
 201                         pinctrl-1 = <&sdi4_sleep_mode>;
 202
 203                         status = "okay";
 204                 };
 205
 206                 uart@80120000 {
 207                         pinctrl-names = "default", "sleep";
 208                         pinctrl-0 = <&uart0_default_mode>;
 209                         pinctrl-1 = <&uart0_sleep_mode>;
 210                         status = "okay";
 211                 };
 212
 213                 uart@80121000 {
 214                         pinctrl-names = "default", "sleep";
 215                         pinctrl-0 = <&uart1_default_mode>;
 216                         pinctrl-1 = <&uart1_sleep_mode>;
 217                         status = "okay";
 218                 };
 219
 220                 uart@80007000 {
 221                         pinctrl-names = "default", "sleep";
 222                         pinctrl-0 = <&uart2_default_mode>;
 223                         pinctrl-1 = <&uart2_sleep_mode>;
 224                         status = "okay";
 225                 };
 226
 227                 i2c@80004000 {
 228                         pinctrl-names = "default","sleep";
 229                         pinctrl-0 = <&i2c0_default_mode>;
 230                         pinctrl-1 = <&i2c0_sleep_mode>;
 231                 };
 232
 233                 i2c@80122000 {
 234                         pinctrl-names = "default","sleep";
 235                         pinctrl-0 = <&i2c1_default_mode>;
 236                         pinctrl-1 = <&i2c1_sleep_mode>;
 237                 };
 238
 239                 i2c@80128000 {
 240                         pinctrl-names = "default","sleep";
 241                         pinctrl-0 = <&i2c2_default_mode>;
 242                         pinctrl-1 = <&i2c2_sleep_mode>;
 243                         lsm303dlh@18 {
 244                                 /* Accelerometer */
 245                                 compatible = "st,lsm303dlh-accel";
 246                                 st,drdy-int-pin = <1>;
 247                                 reg = <0x18>;
 248                                 vdd-supply = <&ab8500_ldo_aux1_reg>;
 249                                 vddio-supply = <&db8500_vsmps2_reg>;
 250                                 pinctrl-names = "default";
 251                                 pinctrl-0 = <&accel_snowball_mode>;
 252                         };
 253                         lsm303dlm@1e {
 254                                 /* Magnetometer */
 255                                 compatible = "st,lsm303dlm-magn";
 256                                 reg = <0x1e>;
 257                                 vdd-supply = <&ab8500_ldo_aux1_reg>;
 258                                 vddio-supply = <&db8500_vsmps2_reg>;
 259                                 pinctrl-names = "default";
 260                                 pinctrl-0 = <&magneto_snowball_mode>;
 261                         };
 262                         l3g4200d@68 {
 263                                 /* Gyroscope */
 264                                 compatible = "st,l3g4200d-gyro";
 265                                 st,drdy-int-pin = <2>;
 266                                 reg = <0x68>;
 267                                 vdd-supply = <&ab8500_ldo_aux1_reg>;
 268                                 vddio-supply = <&db8500_vsmps2_reg>;
 269                         };
 270                         lsp001wm@5c {
 271                                 /* Barometer/pressure sensor */
 272                                 compatible = "st,lps001wp-press";
 273                                 reg = <0x5c>;
 274                                 vdd-supply = <&ab8500_ldo_aux1_reg>;
 275                                 vddio-supply = <&db8500_vsmps2_reg>;
 276                         };
 277                 };
 278
 279                 i2c@80110000 {
 280                         pinctrl-names = "default","sleep";
 281                         pinctrl-0 = <&i2c3_default_mode>;
 282                         pinctrl-1 = <&i2c3_sleep_mode>;
 283                 };
 284
 285                 ssp@80002000 {
 286                         pinctrl-names = "default";
 287                         pinctrl-0 = <&ssp0_snowball_mode>;
 288                 };
 289
 290                 cpufreq-cooling {
 291                         status = "okay";
 292                 };
 293
 294                 prcmu@80157000 {
 295                         cpufreq {
 296                                 status = "okay";
 297                         };
 298
 299                         thermal@801573c0 {
 300                                 num-trips = <4>;
 301
 302                                 trip0-temp = <70000>;
 303                                 trip0-type = "active";
 304                                 trip0-cdev-num = <1>;
 305                                 trip0-cdev-name0 = "thermal-cpufreq-0";
 306
 307                                 trip1-temp = <75000>;
 308                                 trip1-type = "active";
 309                                 trip1-cdev-num = <1>;
 310                                 trip1-cdev-name0 = "thermal-cpufreq-0";
 311
 312                                 trip2-temp = <80000>;
 313                                 trip2-type = "active";
 314                                 trip2-cdev-num = <1>;
 315                                 trip2-cdev-name0 = "thermal-cpufreq-0";
 316
 317                                 trip3-temp = <85000>;
 318                                 trip3-type = "critical";
 319                                 trip3-cdev-num = <0>;
 320
 321                                 status = "okay";
 322                         };
 323
 324                         ab8500 {
 325                                 ab8500-gpio {
 326                                         compatible = "stericsson,ab8500-gpio";
 327                                 };
 328
 329                                 ext_regulators: ab8500-ext-regulators {
 330                                         ab8500_ext1_reg: ab8500_ext1 {
 331                                                 regulator-name = "ab8500-ext-supply1";
 332                                         };
 333
 334                                         ab8500_ext2_reg_reg: ab8500_ext2 {
 335                                                 regulator-name = "ab8500-ext-supply2";
 336                                         };
 337
 338                                         ab8500_ext3_reg_reg: ab8500_ext3 {
 339                                                 regulator-name = "ab8500-ext-supply3";
 340                                         };
 341                                 };
 342
 343                                 ab8500-regulators {
 344                                         ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 345                                                 regulator-name = "V-DISPLAY";
 346                                         };
 347
 348                                         ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 349                                                 regulator-name = "V-eMMC1";
 350                                         };
 351
 352                                         ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 353                                                 regulator-name = "V-MMC-SD";
 354                                         };
 355
 356                                         ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
 357                                                 regulator-name = "V-INTCORE";
 358                                         };
 359
 360                                         ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 361                                                 regulator-name = "V-TVOUT";
 362                                         };
 363
 364                                         ab8500_ldo_usb_reg: ab8500_ldo_usb {
 365                                                 regulator-name = "dummy";
 366                                         };
 367
 368                                         ab8500_ldo_audio_reg: ab8500_ldo_audio {
 369                                                 regulator-name = "V-AUD";
 370                                         };
 371
 372                                         ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 373                                                 regulator-name = "V-AMIC1";
 374                                         };
 375
 376                                         ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
 377                                                 regulator-name = "V-AMIC2";
 378                                         };
 379
 380                                         ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 381                                                 regulator-name = "V-DMIC";
 382                                         };
 383
 384                                         ab8500_ldo_ana_reg: ab8500_ldo_ana {
 385                                                 regulator-name = "V-CSI/DSI";
 386                                         };
 387                                 };
 388                         };
 389                 };
 390
 391                 pinctrl {
 392                         /*
 393                          * Set this up using hogs, as time goes by and as seems fit, these
 394                          * can be moved over to being controlled by respective device.
 395                          */
 396                         pinctrl-names = "default";
 397                         pinctrl-0 = <&gbf_snowball_mode>,
 398                                   <&wlan_snowball_mode>;
 399
 400                         ethernet {
 401                                 /*
 402                                  * Mux in "SM" which is used for the
 403                                  * SMSC911x Ethernet adapter
 404                                  */
 405                                 eth_snowball_mode: eth_snowball {
 406                                         snowball_mux {
 407                                                 function = "sm";
 408                                                 groups = "sm_b_1";
 409                                         };
 410                                         /* LAN IRQ pin */
 411                                         snowball_cfg1 {
 412                                                 pins = "GPIO140_B11";
 413                                                 ste,config = <&in_nopull>;
 414                                         };
 415                                         /* LAN reset pin */
 416                                         snowball_cfg2 {
 417                                                 pins = "GPIO141_C12";
 418                                                 ste,config = <&gpio_out_hi>;
 419                                         };
 420
 421                                 };
 422                         };
 423                         sdi0 {
 424                                 sdi0_default_mode: sdi0_default {
 425                                         snowball_mux {
 426                                                 function = "mc0";
 427                                                 groups = "mc0dat31dir_a_1";
 428                                         };
 429                                         snowball_cfg1 {
 430                                                 pins = "GPIO21_AB3"; /* DAT31DIR */
 431                                                 ste,config = <&out_hi>;
 432                                         };
 433
 434                                 };
 435                         };
 436                         ssp0 {
 437                                 ssp0_snowball_mode: ssp0_snowball_default {
 438                                         snowball_mux {
 439                                                 function = "ssp0";
 440                                                 groups = "ssp0_a_1";
 441                                         };
 442                                         snowball_cfg1 {
 443                                                 pins = "GPIO144_B13"; /* FRM */
 444                                                 ste,config = <&gpio_out_hi>;
 445                                         };
 446                                         snowball_cfg2 {
 447                                                 pins = "GPIO145_C13"; /* RXD */
 448                                                 ste,config = <&in_pd>;
 449                                         };
 450                                         snowball_cfg3 {
 451                                                 pins =
 452                                                 "GPIO146_D13", /* TXD */
 453                                                 "GPIO143_D12"; /* CLK */
 454                                                 ste,config = <&out_lo>;
 455                                         };
 456
 457                                 };
 458                         };
 459                         gpio_led {
 460                                 gpioled_snowball_mode: gpioled_default {
 461                                         snowball_cfg1 {
 462                                                 pins = "GPIO142_C11";
 463                                                 ste,config = <&gpio_out_hi>;
 464                                         };
 465
 466                                 };
 467                         };
 468                         accelerometer {
 469                                 accel_snowball_mode: accel_snowball {
 470                                         /* Accelerometer lines */
 471                                         snowball_cfg1 {
 472                                                 pins =
 473                                                 "GPIO163_C20", /* ACCEL_IRQ1 */
 474                                                 "GPIO164_B21"; /* ACCEL_IRQ2 */
 475                                                 ste,config = <&gpio_in_pu>;
 476                                         };
 477                                 };
 478                         };
 479                         magnetometer {
 480                                 magneto_snowball_mode: magneto_snowball {
 481                                         snowball_cfg1 {
 482                                                 pins = "GPIO165_C21"; /* MAG_DRDY */
 483                                                 ste,config = <&gpio_in_pu>;
 484                                         };
 485                                 };
 486                         };
 487                         gbf {
 488                                 gbf_snowball_mode: gbf_snowball {
 489                                         /*
 490                                          * GBF (GPS, Bluetooth, FM-radio) interface,
 491                                          * pull low to reset state
 492                                          */
 493                                         snowball_cfg1 {
 494                                                 pins = "GPIO171_D23"; /* GBF_ENA_RESET */
 495                                                 ste,config = <&gpio_out_lo>;
 496                                         };
 497                                  };
 498                         };
 499                         wlan {
 500                                 wlan_snowball_mode: wlan_snowball {
 501                                         /*
 502                                          * Activate this mode with the WLAN chip.
 503                                          * These are plain GPIO pins used by WLAN
 504                                          */
 505                                         snowball_cfg1 {
 506                                                 pins =
 507                                                 "GPIO161_D21", /* WLAN_PMU_EN */
 508                                                 "GPIO215_AH13"; /* WLAN_ENA */
 509                                                 ste,config = <&gpio_out_lo>;
 510                                         };
 511                                         snowball_cfg2 {
 512                                                 pins = "GPIO216_AG12"; /* WLAN_IRQ */
 513                                                 ste,config = <&gpio_in_pu>;
 514                                         };
 515                                 };
 516                         };
 517                 };
 518
 519                 mcde@a0350000 {
 520                         pinctrl-names = "default", "sleep";
 521                         pinctrl-0 = <&lcd_default_mode>;
 522                         pinctrl-1 = <&lcd_sleep_mode>;
 523                 };
 524         };
 525 };