]> CyberLeo.Net >> Repos - FreeBSD/releng/10.2.git/blob - sys/x86/include/segments.h
- Copy stable/10@285827 to releng/10.2 in preparation for 10.2-RC1
[FreeBSD/releng/10.2.git] / sys / x86 / include / segments.h
1 /*-
2  * Copyright (c) 1989, 1990 William F. Jolitz
3  * Copyright (c) 1990 The Regents of the University of California.
4  * All rights reserved.
5  *
6  * This code is derived from software contributed to Berkeley by
7  * William Jolitz.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 4. Neither the name of the University nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  *
33  *      from: @(#)segments.h    7.1 (Berkeley) 5/9/91
34  * $FreeBSD$
35  */
36
37 #ifndef _X86_SEGMENTS_H_
38 #define _X86_SEGMENTS_H_
39
40 /*
41  * X86 Segmentation Data Structures and definitions
42  */
43
44 /*
45  * Selectors
46  */
47 #define SEL_RPL_MASK    3               /* requester priv level */
48 #define ISPL(s)         ((s)&3)         /* priority level of a selector */
49 #ifdef XEN
50 #define SEL_KPL         1               /* kernel priority level */
51 #else
52 #define SEL_KPL         0               /* kernel priority level */
53 #endif
54 #define SEL_UPL         3               /* user priority level */
55 #define ISLDT(s)        ((s)&SEL_LDT)   /* is it local or global */
56 #define SEL_LDT         4               /* local descriptor table */
57 #define IDXSEL(s)       (((s)>>3) & 0x1fff) /* index of selector */
58 #define LSEL(s,r)       (((s)<<3) | SEL_LDT | r) /* a local selector */
59 #define GSEL(s,r)       (((s)<<3) | r)  /* a global selector */
60
61 /*
62  * User segment descriptors (%cs, %ds etc for i386 apps. 64 bit wide)
63  * For long-mode apps, %cs only has the conforming bit in sd_type, the sd_dpl,
64  * sd_p, sd_l and sd_def32 which must be zero).  %ds only has sd_p.
65  */
66 struct segment_descriptor {
67         unsigned sd_lolimit:16;         /* segment extent (lsb) */
68         unsigned sd_lobase:24;          /* segment base address (lsb) */
69         unsigned sd_type:5;             /* segment type */
70         unsigned sd_dpl:2;              /* segment descriptor priority level */
71         unsigned sd_p:1;                /* segment descriptor present */
72         unsigned sd_hilimit:4;          /* segment extent (msb) */
73         unsigned sd_xx:2;               /* unused */
74         unsigned sd_def32:1;            /* default 32 vs 16 bit size */
75         unsigned sd_gran:1;             /* limit granularity (byte/page units)*/
76         unsigned sd_hibase:8;           /* segment base address  (msb) */
77 } __packed;
78
79 struct user_segment_descriptor {
80         unsigned sd_lolimit:16;         /* segment extent (lsb) */
81         unsigned sd_lobase:24;          /* segment base address (lsb) */
82         unsigned sd_type:5;             /* segment type */
83         unsigned sd_dpl:2;              /* segment descriptor priority level */
84         unsigned sd_p:1;                /* segment descriptor present */
85         unsigned sd_hilimit:4;          /* segment extent (msb) */
86         unsigned sd_xx:1;               /* unused */
87         unsigned sd_long:1;             /* long mode (cs only) */
88         unsigned sd_def32:1;            /* default 32 vs 16 bit size */
89         unsigned sd_gran:1;             /* limit granularity (byte/page units)*/
90         unsigned sd_hibase:8;           /* segment base address  (msb) */
91 } __packed;
92
93 #define USD_GETBASE(sd)         (((sd)->sd_lobase) | (sd)->sd_hibase << 24)
94 #define USD_SETBASE(sd, b)      (sd)->sd_lobase = (b);  \
95                                 (sd)->sd_hibase = ((b) >> 24);
96 #define USD_GETLIMIT(sd)        (((sd)->sd_lolimit) | (sd)->sd_hilimit << 16)
97 #define USD_SETLIMIT(sd, l)     (sd)->sd_lolimit = (l); \
98                                 (sd)->sd_hilimit = ((l) >> 16);
99
100 #ifdef __i386__
101 /*
102  * Gate descriptors (e.g. indirect descriptors)
103  */
104 struct gate_descriptor {
105         unsigned gd_looffset:16;        /* gate offset (lsb) */
106         unsigned gd_selector:16;        /* gate segment selector */
107         unsigned gd_stkcpy:5;           /* number of stack wds to cpy */
108         unsigned gd_xx:3;               /* unused */
109         unsigned gd_type:5;             /* segment type */
110         unsigned gd_dpl:2;              /* segment descriptor priority level */
111         unsigned gd_p:1;                /* segment descriptor present */
112         unsigned gd_hioffset:16;        /* gate offset (msb) */
113 } __packed;
114
115 /*
116  * Generic descriptor
117  */
118 union descriptor {
119         struct segment_descriptor sd;
120         struct gate_descriptor gd;
121 };
122 #else
123 /*
124  * Gate descriptors (e.g. indirect descriptors, trap, interrupt etc. 128 bit)
125  * Only interrupt and trap gates have gd_ist.
126  */
127 struct gate_descriptor {
128         uint64_t gd_looffset:16;        /* gate offset (lsb) */
129         uint64_t gd_selector:16;        /* gate segment selector */
130         uint64_t gd_ist:3;              /* IST table index */
131         uint64_t gd_xx:5;               /* unused */
132         uint64_t gd_type:5;             /* segment type */
133         uint64_t gd_dpl:2;              /* segment descriptor priority level */
134         uint64_t gd_p:1;                /* segment descriptor present */
135         uint64_t gd_hioffset:48;        /* gate offset (msb) */
136         uint64_t sd_xx1:32;
137 } __packed;
138
139 /*
140  * Generic descriptor
141  */
142 union descriptor {
143         struct user_segment_descriptor sd;
144         struct gate_descriptor gd;
145 };
146 #endif
147
148         /* system segments and gate types */
149 #define SDT_SYSNULL      0      /* system null */
150 #define SDT_SYS286TSS    1      /* system 286 TSS available */
151 #define SDT_SYSLDT       2      /* system local descriptor table */
152 #define SDT_SYS286BSY    3      /* system 286 TSS busy */
153 #define SDT_SYS286CGT    4      /* system 286 call gate */
154 #define SDT_SYSTASKGT    5      /* system task gate */
155 #define SDT_SYS286IGT    6      /* system 286 interrupt gate */
156 #define SDT_SYS286TGT    7      /* system 286 trap gate */
157 #define SDT_SYSNULL2     8      /* system null again */
158 #define SDT_SYS386TSS    9      /* system 386 TSS available */
159 #define SDT_SYSTSS       9      /* system available 64 bit TSS */
160 #define SDT_SYSNULL3    10      /* system null again */
161 #define SDT_SYS386BSY   11      /* system 386 TSS busy */
162 #define SDT_SYSBSY      11      /* system busy 64 bit TSS */
163 #define SDT_SYS386CGT   12      /* system 386 call gate */
164 #define SDT_SYSCGT      12      /* system 64 bit call gate */
165 #define SDT_SYSNULL4    13      /* system null again */
166 #define SDT_SYS386IGT   14      /* system 386 interrupt gate */
167 #define SDT_SYSIGT      14      /* system 64 bit interrupt gate */
168 #define SDT_SYS386TGT   15      /* system 386 trap gate */
169 #define SDT_SYSTGT      15      /* system 64 bit trap gate */
170
171         /* memory segment types */
172 #define SDT_MEMRO       16      /* memory read only */
173 #define SDT_MEMROA      17      /* memory read only accessed */
174 #define SDT_MEMRW       18      /* memory read write */
175 #define SDT_MEMRWA      19      /* memory read write accessed */
176 #define SDT_MEMROD      20      /* memory read only expand dwn limit */
177 #define SDT_MEMRODA     21      /* memory read only expand dwn limit accessed */
178 #define SDT_MEMRWD      22      /* memory read write expand dwn limit */
179 #define SDT_MEMRWDA     23      /* memory read write expand dwn limit accessed*/
180 #define SDT_MEME        24      /* memory execute only */
181 #define SDT_MEMEA       25      /* memory execute only accessed */
182 #define SDT_MEMER       26      /* memory execute read */
183 #define SDT_MEMERA      27      /* memory execute read accessed */
184 #define SDT_MEMEC       28      /* memory execute only conforming */
185 #define SDT_MEMEAC      29      /* memory execute only accessed conforming */
186 #define SDT_MEMERC      30      /* memory execute read conforming */
187 #define SDT_MEMERAC     31      /* memory execute read accessed conforming */
188
189 /*
190  * Size of IDT table
191  */
192 #define NIDT            256     /* 32 reserved, 0x80 syscall, most are h/w */
193 #define NRSVIDT         32      /* reserved entries for cpu exceptions */
194
195 /*
196  * Entries in the Interrupt Descriptor Table (IDT)
197  */
198 #define IDT_DE          0       /* #DE: Divide Error */
199 #define IDT_DB          1       /* #DB: Debug */
200 #define IDT_NMI         2       /* Nonmaskable External Interrupt */
201 #define IDT_BP          3       /* #BP: Breakpoint */
202 #define IDT_OF          4       /* #OF: Overflow */
203 #define IDT_BR          5       /* #BR: Bound Range Exceeded */
204 #define IDT_UD          6       /* #UD: Undefined/Invalid Opcode */
205 #define IDT_NM          7       /* #NM: No Math Coprocessor */
206 #define IDT_DF          8       /* #DF: Double Fault */
207 #define IDT_FPUGP       9       /* Coprocessor Segment Overrun */
208 #define IDT_TS          10      /* #TS: Invalid TSS */
209 #define IDT_NP          11      /* #NP: Segment Not Present */
210 #define IDT_SS          12      /* #SS: Stack Segment Fault */
211 #define IDT_GP          13      /* #GP: General Protection Fault */
212 #define IDT_PF          14      /* #PF: Page Fault */
213 #define IDT_MF          16      /* #MF: FPU Floating-Point Error */
214 #define IDT_AC          17      /* #AC: Alignment Check */
215 #define IDT_MC          18      /* #MC: Machine Check */
216 #define IDT_XF          19      /* #XF: SIMD Floating-Point Exception */
217 #define IDT_IO_INTS     NRSVIDT /* Base of IDT entries for I/O interrupts. */
218 #define IDT_SYSCALL     0x80    /* System Call Interrupt Vector */
219 #define IDT_DTRACE_RET  0x92    /* DTrace pid provider Interrupt Vector */
220 #define IDT_EVTCHN      0x93    /* Xen HVM Event Channel Interrupt Vector */
221
222 #if defined(__i386__) || defined(__ia64__)
223 /*
224  * Entries in the Global Descriptor Table (GDT)
225  * Note that each 4 entries share a single 32 byte L1 cache line.
226  * Some of the fast syscall instructions require a specific order here.
227  */
228 #define GNULL_SEL       0       /* Null Descriptor */
229 #define GPRIV_SEL       1       /* SMP Per-Processor Private Data */
230 #define GUFS_SEL        2       /* User %fs Descriptor (order critical: 1) */
231 #define GUGS_SEL        3       /* User %gs Descriptor (order critical: 2) */
232 #define GCODE_SEL       4       /* Kernel Code Descriptor (order critical: 1) */
233 #define GDATA_SEL       5       /* Kernel Data Descriptor (order critical: 2) */
234 #define GUCODE_SEL      6       /* User Code Descriptor (order critical: 3) */
235 #define GUDATA_SEL      7       /* User Data Descriptor (order critical: 4) */
236 #define GBIOSLOWMEM_SEL 8       /* BIOS low memory access (must be entry 8) */
237 #define GPROC0_SEL      9       /* Task state process slot zero and up */
238 #define GLDT_SEL        10      /* Default User LDT */
239 #define GUSERLDT_SEL    11      /* User LDT */
240 #define GPANIC_SEL      12      /* Task state to consider panic from */
241 #define GBIOSCODE32_SEL 13      /* BIOS interface (32bit Code) */
242 #define GBIOSCODE16_SEL 14      /* BIOS interface (16bit Code) */
243 #define GBIOSDATA_SEL   15      /* BIOS interface (Data) */
244 #define GBIOSUTIL_SEL   16      /* BIOS interface (Utility) */
245 #define GBIOSARGS_SEL   17      /* BIOS interface (Arguments) */
246 #define GNDIS_SEL       18      /* For the NDIS layer */
247 #ifdef XEN
248 #define NGDT            9
249 #else
250 #define NGDT            19
251 #endif
252
253 /*
254  * Entries in the Local Descriptor Table (LDT)
255  */
256 #define LSYS5CALLS_SEL  0       /* forced by intel BCS */
257 #define LSYS5SIGR_SEL   1
258 #define L43BSDCALLS_SEL 2       /* notyet */
259 #define LUCODE_SEL      3
260 #define LSOL26CALLS_SEL 4       /* Solaris >= 2.6 system call gate */
261 #define LUDATA_SEL      5
262 /* separate stack, es,fs,gs sels ? */
263 /* #define      LPOSIXCALLS_SEL 5*/     /* notyet */
264 #define LBSDICALLS_SEL  16      /* BSDI system call gate */
265 #define NLDT            (LBSDICALLS_SEL + 1)
266
267 #else /* !__i386__ && !__ia64__ */
268 /*
269  * Entries in the Global Descriptor Table (GDT)
270  */
271 #define GNULL_SEL       0       /* Null Descriptor */
272 #define GNULL2_SEL      1       /* Null Descriptor */
273 #define GUFS32_SEL      2       /* User 32 bit %fs Descriptor */
274 #define GUGS32_SEL      3       /* User 32 bit %gs Descriptor */
275 #define GCODE_SEL       4       /* Kernel Code Descriptor */
276 #define GDATA_SEL       5       /* Kernel Data Descriptor */
277 #define GUCODE32_SEL    6       /* User 32 bit code Descriptor */
278 #define GUDATA_SEL      7       /* User 32/64 bit Data Descriptor */
279 #define GUCODE_SEL      8       /* User 64 bit Code Descriptor */
280 #define GPROC0_SEL      9       /* TSS for entering kernel etc */
281 /* slot 10 is second half of GPROC0_SEL */
282 #define GUSERLDT_SEL    11      /* LDT */
283 /* slot 12 is second half of GUSERLDT_SEL */
284 #define NGDT            13
285 #endif /* __i386__ || __ia64__ */
286
287 #endif /* !_X86_SEGMENTS_H_ */