1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2008/10/12 23:03:54 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+pp|ansi printer port,
380 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
381 ansi+csr|ansi scroll-region plus cursor save & restore,
382 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
384 # The IBM PC alternate character set. Plug this into any Intel console entry.
385 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
386 # ROM graphics for control characters such as the diamond, up- and down-arrow.
387 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
388 # will work with any Intel console, they all seem to have inherited \E[11m
389 # from the ANSI.SYS de-facto standard.
390 klone+acs|alternate character set for ansi.sys displays,
391 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
392 rmacs=\E[10m, smacs=\E[11m,
394 # Highlight controls corresponding to the ANSI.SYS standard. Most
395 # console drivers for Intel boxes obey these. Makes the same assumption
396 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
397 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
398 klone+sgr|attribute control for ansi.sys displays,
399 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
400 rmso=\E[m, rmul=\E[m,
401 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
402 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
405 # Most Intel boxes do not treat "invis" (invisible) text.
406 klone+sgr8|attribute control for ansi.sys displays,
408 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
411 # Highlight controls corresponding to the ANSI.SYS standard. *All*
412 # console drivers for Intel boxes obey these. Does not assume \E[11m will
413 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
414 # diamond and arrow characters under curses.
415 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
416 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
418 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
419 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
422 # KOI8-R (RFC1489) acs (alternate character set)
423 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
424 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
425 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
426 rmacs=\E[10m, smacs=\E[11m,
428 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
429 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
430 # but equivalent strings that don't rely on that coincidence:
431 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
432 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
433 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
434 # They match a subset of ECMA-48.
435 klone+color|color control for ansi.sys and ISO6429-compatible displays,
436 colors#8, ncv#3, pairs#64,
437 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
439 # This is better than klone+color, it doesn't assume white-on-black as the
440 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
441 ecma+color|color control for ECMA-48-compatible terminals,
443 colors#8, ncv#3, pairs#64,
444 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
446 # Attribute control for ECMA-48-compatible terminals
447 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
448 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
450 # For comparison, here are all the capabilities implied by the Intel
451 # Binary Compatibility Standard (level 2) that fit within terminfo.
452 # For more detail on this rather pathetic standard, see the comments
453 # near the end of this file.
454 ibcs2|Intel Binary Compatibility Standard prescriptions,
455 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
456 cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
457 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
458 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
459 indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
460 smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
462 #### ANSI/ECMA-48 terminals and terminal emulators
464 # See near the end of this file for details on ANSI conformance.
465 # Don't mess with these entries! Lots of other entries depend on them!
467 # This section lists entries in a least-capable to most-capable order.
468 # if you're in doubt about what `ANSI' matches yours, try them in that
469 # order and back off from the first that breaks.
471 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
472 # and more than one page of memory. It uses local motions instead of
473 # direct cursor addressing, and makes almost no assumptions. It does
474 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
475 ansi-mr|mem rel cup ansi,
477 cols#80, lines#24, use=vanilla, use=ansi+erase,
480 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
481 # beware of screen size problems and memory relative cursor addressing.
482 ansi-mini|any ansi terminal with pessimistic assumptions,
484 cols#80, lines#24, use=vanilla, use=ansi+cup,
487 # ansi-mtabs adds relative addressing and minimal tab support
488 ansi-mtabs|any ansi terminal with pessimistic assumptions,
490 ht=^I, use=ansi+local1, use=ansi-mini,
492 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
494 # The following is an entry for the full ANSI 3.64 (1977). It lacks
495 # padding, but most terminals using the standard are "fast" enough
496 # not to require any -- even at 9600 bps. If you encounter problems,
497 # try including the padding specifications.
499 # Note: the :as: and :ae: specifications are not implemented here, for
500 # the available termcap documentation does not make clear WHICH alternate
501 # character set to specify. ANSI 3.64 seems to make allowances for several.
502 # Please make the appropriate adjustments to fit your needs -- that is
503 # if you will be using alternate character sets.
505 # There are very few terminals running the full ANSI 3.64 standard,
506 # so I could only test this entry on one verified terminal (Visual 102).
507 # I would appreciate the results on other terminals sent to me.
509 # Please report comments, changes, and problems to:
511 # U.S. MAIL: Hugh Hansard
514 # Atlanta, GA. 30322.
516 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
518 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
519 ansi77|ansi 3.64 standard 1977 version,
521 cols#80, it#8, lines#24,
522 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
523 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
524 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
525 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
526 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
527 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
528 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
529 smso=\E[7m, smul=\E[4m,
531 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
532 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
533 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
534 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
535 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
536 # to confuse many emulators. On the other hand, we can count on these programs
537 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
538 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
539 # ANSI.SYS influence.
540 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
541 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
543 cols#80, it#8, lines#24,
544 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
545 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
546 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
547 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
548 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
550 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
551 lines#25, use=pcansi-m,
552 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
553 lines#33, use=pcansi-m,
554 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
555 lines#43, use=pcansi-m,
556 # The color versions. All PC emulators do color...
557 pcansi|ibm-pc terminal programs claiming to be ansi,
558 use=klone+color, use=pcansi-m,
559 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
560 lines#25, use=pcansi,
561 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
562 lines#33, use=pcansi,
563 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
564 lines#43, use=pcansi,
566 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
567 # If you want pound signs rather than dollars, replace `B' with `A'
568 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
569 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
570 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
572 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
573 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
574 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
575 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
576 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
577 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
578 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
579 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
580 vpa=\E[%i%p1%dd, use=pcansi-m,
582 ansi+enq|ncurses extension for ANSI ENQ,
583 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
586 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
587 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
588 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
589 ansi|ansi/pc-term compatible with color,
590 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
592 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
593 # all the normal ANSI stuff with no extensions. It assumes
594 # insert/delete line/char is there, so it won't work with
595 # vt100 clones. It assumes video attributes for bold, blink,
596 # underline, and reverse, which won't matter much if the terminal
597 # can't do some of those. Padding is assumed to be zero, which
598 # shouldn't hurt since xon/xoff is assumed.
599 ansi-generic|generic ansi standard terminal,
601 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
602 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
603 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
604 use=ansi+sgrbold, use=ansi+arrows,
606 #### DOS ANSI.SYS variants
608 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
609 # documentation (except for the keyboard key reassignment feature, which
610 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
611 # though undocumented. The <pfkey> capability is untested but should work for
612 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
613 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
614 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
615 OTbs, am, mir, msgr, xon,
617 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
618 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
619 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
620 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
621 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
622 u7=\E[6n, use=klone+color, use=klone+sgr8,
623 ansi.sys|ANSI.SYS 3.1 and later versions,
624 el=\E[K, use=ansi.sys-old,
627 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
628 # This should only be used when the terminal emulator cannot redefine the keys.
629 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
630 # definitions must be restored. If the terminal emulator is quit while in vi
631 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
632 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
633 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
634 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
635 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
636 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
637 # Consequently the End keypad key could not be set (it is relatively safe and
638 # actually useful because it sends ^@ O, which beeps and opens a line above).
639 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
640 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
641 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
642 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
645 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
646 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
647 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
648 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
651 # See ansi.sysk and nansi.sys above.
652 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
653 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
654 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
657 #### ANSI console types
662 # BeOS entry for Terminal program Seems to be almost ANSI
663 beterm|BeOS Terminal,
664 am, eo, mir, msgr, xenl, xon,
665 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
666 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
667 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
668 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
669 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
670 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
671 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
672 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
673 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
674 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
675 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
676 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
677 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
678 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
679 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
680 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
681 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
682 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
683 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
684 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
690 # This entry is good for the 1.2.13 or later version of the Linux console.
692 # ***************************************************************************
695 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
696 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
697 # * character. Here are the keymap replacement lines that will set this up: *
699 # keycode 15 = Tab Tab
700 # alt keycode 15 = Meta_Tab
701 # shift keycode 15 = F26
702 # string F26 ="\033[Z"
704 # * This has to use a key slot which is unfortunate (any unused one will *
705 # * do, F26 is the higher-numbered one). The change ought to be built *
706 # * into the kernel tables. *
708 # ***************************************************************************
710 # All linux kernels since 1.2.13 (at least) set the screen size
711 # themselves; this entry assumes that capability.
713 linux-basic|linux console,
714 am, bce, eo, mir, msgr, xenl, xon,
716 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
717 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
718 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
719 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
720 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
721 el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
722 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
723 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
724 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
725 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
726 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
727 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
728 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
729 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
730 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
731 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
732 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
733 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
734 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
735 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
738 linux-m|Linux console no color,
740 setab@, setaf@, setb@, setf@, use=linux,
742 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
743 # and it matters, turn off <ccc>. The %02x escape used to implement this is
744 # not supposedly back-portable to older SV curses (although it has worked fine
745 # on Solaris for several years) and not supported in ncurses versions before
747 linux-c-nc|linux console with color-change,
749 initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
750 oc=\E]R, use=linux-basic,
751 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
752 linux-c|linux console 1.3.6+ for older ncurses,
754 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
755 oc=\E]R, use=linux-basic,
757 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
758 # get a block cursor for cvvis.
759 # reported by Frank Heckenbach <frank@g-n-u.de>.
761 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
762 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
764 # Subject: linux 2.6.26 vt back_color_erase
765 # Changes to the Linux console driver broke bce model as reported in
766 # https://bugzilla.novell.com/show_bug.cgi?id=418613
768 # http://lkml.org/lkml/2008/4/26/305
769 # http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
770 linux2.6.26|linux console w/o bce,
773 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
774 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
775 ich@, ich1@, use=linux,
777 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
778 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
779 linux-koi8|linux with koi8 alternate character set,
780 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
781 use=linux, use=klone+koi8acs,
783 # Another entry for KOI8-r with Qing Long's acsc.
784 # (which one better complies with the standard?)
785 linux-koi8r|linux with koi8-r alternate character set,
786 use=linux, use=klone+koi8acs,
788 # Entry for the latin1 and latin2 fonts
789 linux-lat|linux with latin1 or latin2 alternate character set,
790 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
793 # This uses graphics from VT codeset instead of from cp437.
794 # reason: cp437 (aka "straight to font") is not functional under luit.
795 # from: Andrey V Lukyanov <land@long.yar.ru>.
796 linux-vt|linux console using VT codes for graphics,
797 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
798 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
801 # This is based on the Linux console (relies on the console to perform some
802 # of the functionality), but does not recognize as many control sequences.
803 # The program comes bundled with an old (circa 1998) copy of the Linux
804 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
805 # \E* move cursor to home, as as \E[H
807 # \EE move cursor to beginning of row
808 # \E[y,xf same as \E[y,xH
810 # Note: The status-line support is buggy (dsl does not work).
811 kon|kon2|jfbterm|Kanji ON Linux console,
813 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
814 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
820 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
823 cols#80, it#8, lines#25,
824 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
825 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
826 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
827 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
828 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
829 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
830 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
831 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
832 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
833 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
834 smso=\E[7m, smul=\E[4m,
835 mach-bold|Mach Console with bold instead of underline,
836 rmul=\E[0m, smul=\E[1m, use=mach,
837 mach-color|Mach Console with ANSI color,
839 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
840 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
842 # From: Marcus Brinkmann
843 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
845 # Comments in the original are summarized here:
847 # hurd uses 8-bit characters (km).
849 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
851 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
852 # have the eat_newline_glitch. It doesn't support setting or removing tab
855 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
856 # one byte instead three.
858 # <ich1> is not included because hurd has insert mode.
860 # hurd doesn't use ^J for scrolling, because this could put things into the
863 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
864 # This is a GNU extension.
866 # The original has commented-out ncv, but is restored here.
868 # Reading the source, RIS resets cnorm, but not xmous.
869 hurd|The GNU Hurd console server,
870 am, bce, bw, eo, km, mir, msgr, xon,
871 colors#8, it#8, ncv#18, pairs#64,
872 acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
873 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
874 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
875 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
876 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
877 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
878 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
879 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
880 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
881 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
882 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
883 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
884 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
885 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
886 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
887 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
888 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
889 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
890 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
891 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
892 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
893 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
894 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
895 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
896 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
902 # OSF/1 1.1 Snapshot 2
903 pmcons|pmconsole|PMAX console,
906 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
907 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
908 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
910 # SCO console and SOS-Syscons console for 386bsd
911 # (scoansi: had unknown capabilities
912 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
913 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
914 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
915 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
916 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
917 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
918 # on the <smacs>=\E[12m -- esr)
920 # klone+sgr-dumb is an error since the acsc does not match -TD
922 # In this description based on SCO's keyboard(HW) manpage list of default
923 # function key values:
924 # F13-F24 are shifted F1-F12
925 # F25-F36 are control F1-F12
926 # F37-F48 are shift+control F1-F12
928 # hpa/vpa work in the console, but not in scoterm:
932 # SCO's terminfo uses
935 # which do not work (console or scoterm).
937 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
938 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
939 OTbs, am, bce, eo, xon,
940 colors#8, cols#80, it#8, lines#25, pairs#64,
941 acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
942 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
943 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
944 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
945 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
946 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
947 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
948 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
949 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
950 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
951 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
952 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
953 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
954 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
955 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
956 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
957 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
958 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
959 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
960 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
961 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
962 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
963 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
964 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
965 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
966 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
967 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
969 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
970 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
971 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
972 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
973 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
974 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
975 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
976 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
977 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
979 # make this easy to change...
980 scoansi|SCO Extended ANSI standard crt,
983 # This actually describes the generic SVr4 display driver for Intel boxes.
984 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
985 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
986 att6386|at386|386at|AT&T WGS 6386 console,
988 cols#80, it#8, lines#25,
989 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
990 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
991 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
992 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
993 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
994 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
995 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
996 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
997 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
998 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
999 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1000 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
1001 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
1002 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
1003 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
1004 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
1006 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
1007 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1008 tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
1009 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
1010 pc6300plus|AT&T 6300 plus,
1013 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
1014 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
1015 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1016 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
1017 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
1018 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1019 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
1020 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
1021 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1022 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1024 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1026 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
1027 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
1028 # is broken. All the special key sequences are broken, making it unusable
1029 # with Emacs. The problem stems from the following:
1031 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
1032 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
1033 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
1034 # uses resizable terminal windows, but the bundled terminal program always
1035 # uses an 80x24 window (and doesn't support seem to support a 132-column
1038 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
1039 # library which was a superset of SVr3.5 curses (called tam, for "terminal
1040 # access method".) tam includes support for real, overlapping windows,
1041 # onscreen function key labels, and bitmap graphics. But since the primary
1042 # user interface on the UNIX PC was a GUI program (ua, for "user
1043 # assistant",) and remote administration was considered important for the
1044 # machine, tam also supported VT100-compatible terminals attached to the
1045 # serial port or used across the StarLan network. To simulate the extra keys
1046 # not present on a VT100, users could press ESC and a two-letter sequence,
1047 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
1048 # however, were not the same as those sent by the actual Undo key. The
1049 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
1050 # (If you're interested in adding some of the tam calls to ncurses, btw, I
1051 # have the full documentation and several programs which use tam. It also
1052 # used an extended terminfo format to describe key sequences, special
1053 # highlighting modes, etc.)
1055 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
1056 # there are two sequences for every key-modifier combination (local keyboard
1057 # sequence and remote "VT100" sequence.) But I doubt many people are trying
1058 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
1059 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
1060 # seem to have been built from the manual describing the VT100 sequences.
1061 # This means it doesn't work for a real live UNIX PC.
1063 # FONTS: The UNIX PC also has a strange interpretation of "alternate
1064 # character set". Rather than the VT100 graphics you might expect, it allows
1065 # up to 8 custom fonts to be loaded at any given time. This means that
1066 # programs expecting VT100 graphics will usually be disappointed. For this
1067 # reason I have disabled the smacs/rmacs sequences, but they could easily be
1068 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
1069 # manpage), should you wish to do so:
1071 # SGR10 - Select font 0 - ESC [ 10 m or SO
1072 # SGR11 - Select font 1 - ESC [ 11 m or SI
1073 # SGR12 - Select font 2 - ESC [ 12 m
1075 # SGR17 - Select font 7 - ESC [ 17 m
1077 # Graphics for line drawing are not reliably found at *any* character
1078 # location because the UNIX PC has dynamically reloadable fonts. I use font
1079 # 0 for regular text and font 1 for italics, but this is by no means
1080 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
1082 # MISC: The cursor visible/cursor invisible sequences were swapped in the
1083 # distributed terminfo.
1085 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
1086 # the UNIX PC terminfo entry. The modified version works great with Lynx,
1087 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
1088 # attached by serial cable. In Emacs, even the Undo key works, and many
1089 # applications can now use the F1-F8 keys.
1092 # Terminfo entry for the AT&T Unix PC 7300
1093 # from escape(7) in Unix PC 7300 Manual.
1094 # Somewhat similar to a vt100-am (but different enough
1095 # to redo this from scratch.)
1097 # /***************************************************************
1099 # * FONT LOADING PROGRAM FOR THE UNIX PC
1101 # * This routine loads a font defined in the file ALTFONT
1102 # * into font memory slot #1. Once the font has been loaded,
1103 # * it can be used as an alternative character set.
1105 # * The call to ioctl with the argument WIOCLFONT is the key
1106 # * to this routine. For more information, see window(7) in
1107 # * the PC 7300 documentation.
1108 # ***************************************************************/
1109 # #include <string.h> /* needed for strcpy call */
1110 # #include <sys/window.h> /* needed for ioctl call */
1111 # #define FNSIZE 60 /* font name size */
1112 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
1114 # * The file /usr/lib/wfont/special.8.ft comes with the
1115 # * standard PC software. It defines a graphics character set
1116 # * similar to that of the Teletype 5425 terminal. To view
1117 # * this or other fonts in /usr/lib/wfont, use the command
1118 # * cfont <filename>. For further information on fonts see
1119 # * cfont(1) in the PC 7300 documentation.
1122 # struct altfdata /* structure for alt font data */
1124 # short altf_slot; /* memory slot number */
1125 # char altf_name[FNSIZE]; /* font name (file name) */
1129 # int wd; /* window in which altfont will be */
1130 # struct altfdata altf;
1132 # strcpy(altf.altf_name,ALTFONT);
1133 # for (wd =1; wd < 12; wd++) {
1134 # ioctl(wd, WIOCLFONT,&altf);
1138 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
1139 # they're confirmed by the man page for the System V display---esr)
1141 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
1143 cols#80, it#8, lines#24,
1144 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1145 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1146 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1147 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1148 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1149 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1150 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1151 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1152 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1153 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1154 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1155 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1156 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1157 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1158 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1159 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1160 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1161 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1162 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1163 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1164 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1165 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1168 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1169 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1170 # for the application keypad mode. We have added iris-ansi-ap rather than
1171 # change the original to keypad mode.
1173 # (iris-ansi: added rmam/smam based on init string -- esr)
1175 # This entry, and those derived from it, is used in xwsh (also known as
1176 # winterm). Some capabilities that do not fit into the terminfo model
1177 # include the shift- and control-functionkeys:
1179 # F1-F12 generate different codes when shift or control modifiers are used.
1183 # control-F1 \E[025q
1185 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1186 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1188 # The cursor keys also have different codes:
1189 # control-up \E[162q
1190 # control-down \E[165q
1191 # control-left \E[159q
1192 # control-right \E[168q
1195 # shift-down \E[164q
1196 # shift-left \E[158q
1197 # shift-right \E[167q
1199 # control-tab \[072q
1201 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1203 cols#80, it#8, lines#40,
1204 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1205 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1206 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1207 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1208 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1209 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1210 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1211 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1212 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1213 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1214 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1215 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1216 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1217 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1218 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1219 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1220 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1221 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1222 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1224 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1225 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1226 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1228 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1229 # (T.Dickey 98/1/24)
1230 iris-color|xwsh|IRIX ANSI with color,
1232 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1233 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1234 rmul=\E[24m, rs1=\Ec,
1235 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1236 sitm=\E[3m, use=vt100+enq, use=klone+color,
1239 # The following is a version of the ibm-pc entry distributed with PC/IX,
1240 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1241 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1242 # (the former is untrue, and the latter failed under UCB/man); standout and
1243 # underline modes have been added. Note: this entry describes the "native"
1244 # capabilities of the PC monochrome display, without ANY emulation; most
1245 # communications packages (but NOT PC/IX connect) do some kind of emulation.
1249 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1250 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1251 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1254 # (ibmpcx: this entry used to be known as ibmx.
1255 # It formerly included the following extension capabilities:
1256 # :GC=b:GL=v:GR=t:RT=^J:\
1257 # :GH=\E[196g:GV=\E[179g:\
1258 # :GU=\E[193g:GD=\E[194g:\
1259 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1260 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1261 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1262 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1263 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1264 # what was there before. -- esr)
1265 ibmpcx|xenix|ibmx|IBM PC xenix console display,
1268 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1269 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1270 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1271 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1272 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1273 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
1279 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1280 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1281 # right corner without triggering a scroll. The ncurses terminfo library can
1282 # handle this case with the <ich1> capability, and prefers <am> for better
1283 # optimization. Bug: The <op> capability resets attributes.
1284 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1285 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1286 qnx|qnx4|qnx console,
1287 daisy, km, mir, msgr, xhpa, xt,
1288 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1289 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1290 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1291 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1292 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1293 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1294 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1295 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1296 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1297 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1298 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1299 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1300 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1301 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1302 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1303 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1304 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1305 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1306 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1307 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1308 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1309 kext=\377\270, kf1=\377\201, kf10=\377\212,
1310 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1311 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1312 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1313 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1314 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1315 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1316 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1317 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1318 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1319 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1320 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1321 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1322 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1323 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1324 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1325 khlp=\377\350, khome=\377\240, khts=\377\342,
1326 kich1=\377\253, kil1=\377\273, kind=\377\261,
1327 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1328 knp=\377\252, knxt=\377\312, kopn=\377\357,
1329 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1330 kprv=\377\302, krdo=\377\336, kref=\377\354,
1331 kres=\377\360, krfr=\377\347, kri=\377\271,
1332 krmir=\377\313, krpl=\377\362, krst=\377\352,
1333 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1334 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1335 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1336 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1337 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1341 qnxt|qnxt4|QNX4 terminal,
1344 qnxm|QNX4 with mouse events,
1346 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1347 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1348 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1349 smicm=\E/>2h, use=qnx4,
1354 # Monochrome QNX4 terminal or console. Setting this terminal type will
1355 # allow an application running on a color console to behave as if it
1356 # were a monochrome terminal. Output will be through stdout instead of
1357 # console writes because the term routines will recognize that the
1358 # terminal name starts with 'qnxt'.
1360 qnxtmono|Monochrome QNX4 terminal or console,
1364 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1365 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1366 # (TD: derive from original qnx4 entry)
1367 qnxt2|qnx 2.15 serial terminal,
1369 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1370 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1372 # QNX ANSI terminal definition
1375 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1376 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
1377 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1378 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1379 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1380 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1381 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1382 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1383 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1384 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1385 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1386 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1387 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1388 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1389 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1390 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1391 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1392 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1393 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1394 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1395 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1396 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1397 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1398 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1399 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1400 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1401 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1402 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1403 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1404 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1405 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1406 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1407 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1408 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1409 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1410 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1411 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1412 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1413 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1414 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1415 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1416 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1417 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1418 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1419 smul=\E[4m, tbc=\E[2g,
1420 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1422 qansi|QNX ansi with console writes,
1423 daisy, xhpa, use=qansi-g,
1425 qansi-t|QNX ansi without console writes,
1428 qansi-m|QNX ansi with mouse,
1430 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1431 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1432 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1433 smicm=\E[>2h, use=qansi,
1435 qansi-w|QNX ansi for windows,
1438 #### NetBSD consoles
1440 # pcvt termcap database entries (corresponding to release 3.31)
1441 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1443 # (For the terminfo master file, I translated these into terminfo syntax.
1444 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1445 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1446 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1448 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1449 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1450 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1451 pcvtXX|pcvt vt200 emulator (DEC VT220),
1452 am, km, mir, msgr, xenl,
1454 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1455 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1456 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1457 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1458 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1459 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1460 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1461 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1462 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1463 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1464 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1465 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1466 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1467 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1468 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1469 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1470 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1471 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1472 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1473 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1475 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1476 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1477 # 50 lines entries; 80 columns
1478 pcvt25|dec vt220 emulation with 25 lines,
1480 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1481 pcvt28|dec vt220 emulation with 28 lines,
1483 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1484 pcvt35|dec vt220 emulation with 35 lines,
1486 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1487 pcvt40|dec vt220 emulation with 40 lines,
1489 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1490 pcvt43|dec vt220 emulation with 43 lines,
1492 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1493 pcvt50|dec vt220 emulation with 50 lines,
1495 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1497 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1498 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1499 # 50 lines entries; 132 columns
1500 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1502 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1503 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1505 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1506 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1508 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1509 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1511 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1512 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1514 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1515 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1517 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1519 # OpenBSD implements a color variation
1520 pcvt25-color|dec vt220 emulation with 25 lines and color,
1522 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1523 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1524 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1525 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1526 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1529 # Terminfo entries to enable the use of the ncurses library in colour on a
1530 # NetBSD-arm32 console (only tested on a RiscPC).
1531 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1532 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1533 # typo in invis - TD
1534 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1535 am, bce, msgr, xenl, xon,
1536 cols#80, it#8, lines#30,
1537 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1538 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1539 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1540 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1541 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1542 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1543 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1544 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1545 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1546 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1547 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1548 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1549 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1550 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1551 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1553 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1554 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1555 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1558 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1559 cols#132, lines#50, use=arm100,
1561 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1562 # manufactured by Sharp for the Japenese market.
1563 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1564 x68k|x68k-ite|NetBSD/x68k ITE,
1566 kclr=\E[9~, khlp=\E[28~, use=vt220,
1569 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1571 # (still unfinished, but good enough so far.)
1572 ofcons|DNARD OpenFirmware console,
1575 bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1576 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1577 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1578 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1579 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1580 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1581 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1582 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1583 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1584 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1585 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1586 rmso=\2330m, rmul=\2330m,
1587 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1590 # NetBSD "wscons" emulator in vt220 mode.
1591 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1592 # The emulator renders underlined text in red. Colors are otherwise usable.
1594 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1595 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1596 # vt220 screens in vttest do not work with this emulator. For instance, it
1597 # identifies itself (primary DA response) as a vt220 with selective erase. But
1598 # the selective erase feature does not work. The secondary response is copied
1599 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1600 # the level of detail in a termcap, it is a passable emulator, since ECH does
1601 # work. Don't use it on a VMS system -TD
1602 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1604 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1605 is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1606 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1607 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1608 kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
1609 setaf=\E[3%p1%dm, use=vt220,
1611 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1614 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1616 rcons|BSD rasterconsole,
1618 # Color version of above. Color currently only provided by NetBSD.
1619 rcons-color|BSD rasterconsole with ANSI color,
1622 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1624 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1625 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1626 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1627 # -- compare with cons25w
1629 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1630 colors#8, cols#80, it#8, lines#18, pairs#64,
1631 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1632 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1633 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1634 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1635 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1636 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1637 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1638 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1639 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1640 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1641 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
1642 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
1643 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
1644 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
1645 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
1646 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1648 #### FreeBSD console entries
1650 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1651 # Andrey Chernov maintains the FreeBSD termcap distributions.
1653 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1654 # or comment out the :cb: capability in the console entry.
1656 # Alexander Lukyanov reports:
1657 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1658 # Now el1 clears not only to the line beginning, but also a large chunk
1659 # of previous line. But there is another bug - ech does not work at all.
1663 # common entry without semigraphics
1664 # Bug: The <op> capability resets attributes.
1665 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1666 # instance el1 does if the cursor is moved to the right margin first. Removed
1667 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1669 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1670 # Note that this disables standout with color.
1672 # The emulator sends difference strings based on shift- and control-keys,
1674 # F13-F24 are shifted F1-F12
1675 # F25-F36 are control F1-F12
1676 # F37-F48 are shift+control F1-F12
1677 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1678 am, bce, bw, eo, msgr, npc,
1679 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1680 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1681 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1682 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1683 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1684 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1685 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1686 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1687 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1688 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1689 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
1690 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
1691 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1692 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1693 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1694 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1695 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1696 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1697 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1698 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1699 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1700 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
1701 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1702 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1703 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1704 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
1705 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1706 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1708 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1710 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1711 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1712 smul=\E[4m, use=cons25,
1713 cons30|ansi80x30|freebsd console (30-line ansi mode),
1714 lines#30, use=cons25,
1715 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1716 lines#30, use=cons25-m,
1717 cons43|ansi80x43|freebsd console (43-line ansi mode),
1718 lines#43, use=cons25,
1719 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1720 lines#43, use=cons25-m,
1721 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1722 lines#50, use=cons25,
1723 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1724 lines#50, use=cons25-m,
1725 cons60|ansi80x60|freebsd console (60-line ansi mode),
1726 lines#60, use=cons25,
1727 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1728 lines#60, use=cons25-m,
1729 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1730 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1732 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1734 op@, rmul=\E[m, setab@, setaf@,
1735 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
1736 smul=\E[4m, use=cons25r,
1737 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1738 lines#50, use=cons25r,
1739 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1740 lines#50, use=cons25r-m,
1741 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1742 lines#60, use=cons25r,
1743 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1744 lines#60, use=cons25r-m,
1745 # ISO 8859-1 FreeBSD console
1746 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1747 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1749 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1751 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1752 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1753 smul=\E[4m, use=cons25l1,
1754 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1755 lines#50, use=cons25l1,
1756 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1757 lines#50, use=cons25l1-m,
1758 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1759 lines#60, use=cons25l1,
1760 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1761 lines#60, use=cons25l1-m,
1763 #### 386BSD and BSD/OS Consoles
1766 # This was the original 386BSD console entry (I think).
1767 # Some places it's named oldpc3|oldibmpc3.
1768 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1769 origpc3|origibmpc3|IBM PC 386BSD Console,
1770 OTbs, am, bw, eo, xon,
1772 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
1773 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1774 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1775 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1776 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
1777 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
1778 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
1780 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
1781 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
1784 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
1785 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
1786 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
1787 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
1789 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
1790 # Note, the emulator supports many of the additional console features
1791 # listed in the iBCS2 (e.g. character-set selection) though not all
1792 # are described here. This entry really ought to be upgraded.
1793 # Also note, the console will also work with fewer lines after doing
1794 # "stty rows NN", e.g. to use 24 lines.
1795 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
1796 # Bug: The <op> capability resets attributes.
1797 bsdos-pc|IBM PC BSD/OS Console,
1798 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1799 use=bsdos-pc-nobold,
1801 bsdos-pc-nobold|BSD/OS PC console w/o bold,
1802 use=klone+color, use=bsdos-pc-m,
1804 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
1805 OTbs, am, eo, km, xon,
1806 cols#80, it#8, lines#25,
1807 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
1808 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1809 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1810 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1811 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1812 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
1813 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
1814 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
1817 # Old names for BSD/OS PC console used in releases before 4.1.
1818 pc3|BSD/OS on the PC Console,
1819 use=bsdos-pc-nobold,
1820 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
1823 # BSD/OS on the SPARC
1824 bsdos-sparc|Sun SPARC BSD/OS Console,
1827 # BSD/OS on the PowerPC
1828 bsdos-ppc|PowerPC BSD/OS Console,
1832 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
1834 # Actually (TD pointed this out at the time the acsc string was added):
1835 # vt52 shouldn't define full acsc since most of the cells don't match.
1836 # see vt100 manual page A-31. This is the list that does match:
1845 # The line-drawing happens to work in several terminal emulators, but should
1846 # not be used as a guide to the capabilities of the vt52. Note in particular
1847 # that vt52 does not support line-drawing characters (the scan-X values refer
1848 # to a crude plotting feature) -TD
1851 cols#80, it#8, lines#24,
1852 acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
1853 cub1=\ED, cud1=\EB, cuf1=\EC,
1854 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1855 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
1856 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
1858 #### DEC VT100 and compatibles
1860 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
1861 # and micro consoles can be found in the `obsolete' section. More details on
1862 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
1863 # found near the end of this file.
1865 # Except where noted, these entries are DEC's official terminfos.
1866 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
1867 # Engineering for more information. Updated terminfos and termcaps
1868 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1870 # In October 1995 DEC sold its terminals business, including the VT and Dorio
1871 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
1872 # its name to Boundless Technologies; see http://www.boundless.com.
1875 # NOTE: Any VT100 emulation, whether in hardware or software, almost
1876 # certainly includes what DEC called the `Level 1 editing extension' codes;
1877 # only the very oldest VT100s lacked these and there probably aren't any of
1878 # those left alive. To capture these, use one of the VT102 entries.
1880 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
1881 # since the cursor is left in a different position while in the
1882 # weird state (concept at beginning of next line, vt100 at end
1883 # of this line) so all versions of vi before 3.7 don't handle
1884 # <xenl> right on vt100. The correct way to handle <xenl> is when
1885 # you output the char in column 80, immediately output CR LF
1886 # and then assume you are in column 1 of the next line. If <xenl>
1887 # is on, am should be on too.
1889 # I assume you have smooth scroll off or are at a slow enough baud
1890 # rate that it doesn't matter (1200? or less). Also this assumes
1891 # that you set auto-nl to "on", if you set it off use vt100-nam
1894 # The padding requirements listed here are guesses. It is strongly
1895 # recommended that xon/xoff be enabled, as this is assumed here.
1897 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
1898 # tab settings are in non-volatile memory and don't need to be
1899 # reset upon login. Also setting the number of columns glitches
1900 # the screen annoyingly. You can type "reset" to get them set.
1902 # The VT100 series terminals have cursor ("arrows") keys which can operate
1903 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
1904 # is the reset state, and is assumed to be the normal state. Application
1905 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
1906 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
1907 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
1908 # was provided primarily as an aid to the porting of VT52 applications. It is
1909 # assumed that the cursor keys are normally in Cursor Mode, and expected that
1910 # applications such as vi will always transmit the <smkx> string. Therefore,
1911 # the definitions for the cursor keys are made to match what the terminal
1912 # transmits after the <smkx> string is transmitted. If the <smkx> string
1913 # is a null string or is not defined, then cursor keys are assumed to be in
1914 # "Cursor Mode", and the cursor keys definitions should match that assumption,
1915 # else the application may fail. It is also expected that applications will
1916 # always transmit the <rmkx> string to the terminal before they exit.
1918 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
1919 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
1920 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
1921 # Application Mode. Numeric Mode is the reset state, and is assumed to be
1922 # the normal state. Application Mode is the "set" state. In Numeric Mode,
1923 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
1924 # Enter key transmits the same as the Return key (Note: the Return key
1925 # can be configured to send either LF (\015) or CR LF). In Application Mode,
1926 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
1927 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
1928 # is normally in Numeric Mode. If an application requires that the keypad be
1929 # in Application Mode then it is expected that the user, or the application,
1930 # will set the TERM environment variable to point to a terminfo entry which has
1931 # defined the <smkx> string to include the codes that switch the keypad into
1932 # Application Mode, and the terminfo entry will also define function key
1933 # fields to match the Application Mode control codes. If the <smkx> string
1934 # is a null string or is not defined, then the keypad is assumed to be in
1935 # Numeric Mode. If the <smkx> string switches the keypad into Application
1936 # Mode, it is expected that the <rmkx> string will contain the control codes
1937 # necessary to reset the keypad to "Normal" mode, and it is also expected that
1938 # applications which transmit the <smkx> string will also always transmit the
1939 # <rmkx> string to the terminal before they exit.
1941 # Here's a diagram of the VT100 keypad keys with their bindings.
1942 # The top line is the name of the key (some DEC keyboards have the keys
1943 # labelled somewhat differently, like GOLD instead of PF1, but this is
1944 # the most "official" name). The second line is the escape sequence it
1945 # generates in Application Keypad mode (where "$" means the ESC
1946 # character). The third line contains two items, first the mapping of
1947 # the key in terminfo, and then in termcap.
1948 # _______________________________________
1949 # | PF1 | PF2 | PF3 | PF4 |
1950 # | $OP | $OQ | $OR | $OS |
1951 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1953 # | $Ow | $Ox | $Oy | $Om |
1954 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
1956 # | $Ot | $Ou | $Ov | $Ol |
1957 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
1959 # | $Oq | $Or | $Os | enter |
1960 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
1963 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
1965 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
1966 # terminfo guidelines. That is a compromise used to assign the remaining
1967 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
1969 vt100+keypad|dec vt100 numeric keypad no fkeys,
1970 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
1971 vt100+pfkeys|dec vt100 numeric keypad,
1972 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1974 vt100+fnkeys|dec vt100 numeric keypad,
1975 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
1976 kf9=\EOw, use=vt100+pfkeys,
1978 # A better adaptation to modern keyboards such as the PC's, which have a dozen
1979 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
1980 # use the 5-key arrangement to model the arrow keys as suggested in the
1981 # terminfo guidelines:
1982 # _______________________________________
1983 # | PF1 | PF2 | PF3 | PF4 |
1984 # | $OP | $OQ | $OR | $OS |
1985 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1987 # | $Ow | $Ox | $Oy | $Om |
1988 # |_ka1__K1_|_________|_ka3__K3_|_________|
1990 # | $Ot | $Ou | $Ov | $Ol |
1991 # |_________|_kb2__K2_|_________|_________|
1993 # | $Oq | $Or | $Os | enter |
1994 # |_kc1__K4_|_________|_kc3__K5_| $OM |
1997 # |___________________|_________|_kent_@8_|
1999 vt220+keypad|dec vt220 numeric keypad,
2000 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2001 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2004 vt100+enq|ncurses extension for vt100-style ENQ,
2005 u8=\E[?1;2c, use=ansi+enq,
2006 vt102+enq|ncurses extension for vt102-style ENQ,
2007 u8=\E[?6c, use=ansi+enq,
2009 # And here, for those of you with orphaned VT100s lacking documentation, is
2010 # a description of the soft switches invoked when you do `Set Up'.
2012 # Scroll 0-Jump Shifted 3 0-#
2013 # | 1-Smooth | 1-British pound sign
2014 # | Autorepeat 0-Off | Wrap Around 0-Off
2016 # | | Screen 0-Dark Bkg | | New Line 0-Off
2017 # | | | 1-Light Bkg | | | 1-On
2018 # | | | Cursor 0-Underline | | | Interlace 0-Off
2019 # | | | | 1-Block | | | | 1-On
2021 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2023 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2024 # | | | 1-On | | | 1-50 Hz
2025 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2026 # | | 1-ANSI | | 1-8 Bits
2027 # | Keyclick 0-Off | Parity 0-Off
2029 # Margin Bell 0-Off Parity Sense 0-Odd
2032 # The following SET-UP modes are assumed for normal operation:
2033 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2034 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2035 # Other SET-UP modes may be set for operator convenience or communication
2036 # requirements; I recommend
2037 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2038 # Unless you have a graphics add-on such as Digital Engineering's VT640
2039 # (and even then, whenever it can be arranged!) you should set
2042 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2043 vt100|vt100-am|dec vt100 (w/advanced video),
2044 OTbs, am, mc5i, msgr, xenl, xon,
2045 cols#80, it#8, lines#24, vt#3,
2046 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2047 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2048 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2049 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2050 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2051 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2052 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2053 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2054 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2055 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2056 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2057 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2058 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2059 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2060 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2061 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2063 vt100nam|vt100-nam|vt100 no automargins,
2064 am@, xenl@, use=vt100-am,
2065 vt100-vb|dec vt100 (w/advanced video) & no beep,
2066 bel@, flash=\E[?5h\E[?5l, use=vt100,
2068 # Ordinary vt100 in 132 column ("wide") mode.
2069 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2071 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2072 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2073 cols#132, lines#14, vt@,
2074 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2076 # vt100 with no advanced video.
2077 vt100-nav|vt100 without advanced video option,
2079 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2081 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2082 cols#132, lines#14, use=vt100-nav,
2084 # vt100 with one of the 24 lines used as a status line.
2085 # We put the status line on the top.
2086 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2089 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2090 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2091 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2092 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2094 # Status line at bottom.
2095 # Clearing the screen will clobber status line.
2096 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2099 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2100 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2102 # Most of the `vt100' emulators out there actually emulate a vt102
2103 # This entry (or vt102-nsgr) is probably the right thing to use for
2106 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2108 vt102-w|dec vt102 in wide mode,
2110 rs3=\E[?3h, use=vt102,
2112 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2113 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2114 # string in the canonical vt100 entry above leaves the screen littered
2115 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2116 # after highlight turnoffs. This entry should fix that, and even leave
2117 # ACS support working, at the cost of making multiple-highlight changes
2118 # slightly more expensive.
2119 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2120 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2121 sgr@, sgr0=\E[m, use=vt102,
2123 # VT125 Graphics CRT. Clear screen also erases graphics
2124 # Some vt125's came configured with vt102 support.
2125 vt125|vt125 graphics terminal,
2127 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2129 # This isn't a DEC entry, it came from University of Wisconsin.
2130 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2133 cols#80, it#8, lines#24, vt#3,
2134 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2135 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2136 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2137 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2138 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2139 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2140 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2141 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2142 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2144 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2145 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2146 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2148 # vt132 - like vt100 but slower and has ins/del line and such.
2149 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2150 # manual and from the ANSI standard, this describes the actual
2151 # terminal. I've never actually used a vt132 myself, so this
2156 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2157 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2159 # This vt220 description maps F5--F9 to the second block of function keys
2160 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2161 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2162 # PF1--PF4 are used as F1--F4.
2164 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2165 OTbs, OTpt, am, mir, xenl, xon,
2166 cols#80, lines#24, vt#3,
2168 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2169 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2170 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
2171 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2172 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2173 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2174 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2175 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2176 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2177 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2178 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2179 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2180 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2181 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2182 rmso=\E[27m, rmul=\E[24m,
2183 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2184 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2185 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2186 smso=\E[7m, smul=\E[4m,
2188 # A much better description of the VT200/220; used to be vt220-8
2189 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2190 # designation to accommodate bug in pcvt -TD
2191 vt220|vt200|dec vt220,
2192 OTbs, am, mc5i, mir, msgr, xenl, xon,
2193 cols#80, it#8, lines#24, vt#3,
2194 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2195 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2196 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2197 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2198 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2199 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2200 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2201 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2202 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2203 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2204 is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
2205 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
2206 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2207 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
2208 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
2209 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
2210 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
2211 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
2212 mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
2213 rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
2214 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2215 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2216 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2217 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2218 vt220-w|vt200-w|DEC vt220 in wide mode,
2220 rs3=\E[?3h, use=vt220,
2221 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2222 OTbs, am, mc5i, mir, msgr, xenl, xon,
2223 cols#80, it#8, lines#24, vt#3,
2224 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2225 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
2226 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2227 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2228 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2229 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2230 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2231 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2232 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2233 il=\233%p1%dL, il1=\233L, ind=\ED,
2234 is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
2235 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2236 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
2237 kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
2238 kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
2239 kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
2240 kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
2241 knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
2242 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
2243 nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
2244 rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
2245 rs1=\233?3l, sc=\E7,
2246 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2247 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2248 smso=\2337m, smul=\2334m, tbc=\2333g,
2251 # This vt220 description regards F6--F10 as the second block of function keys
2252 # at the top of the keyboard. This mapping follows the description given
2253 # in the VT220 Programmer Reference Manual and agrees with the labeling
2254 # on some terminals that emulate the vt220. There is no support for an F5.
2255 # See vt220 for an alternate mapping.
2257 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2258 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2259 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2260 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2261 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2263 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2265 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2267 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2268 # (not an official DEC entry!)
2269 # The problem with real vt220 terminals is they don't send escapes when in
2270 # in vt220 mode. This can be gotten around two ways. 1> don't send
2271 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2272 # features of vt100 advanced video which it then has.
2274 # This entry takes the view of putting a vt220 into vt100 mode so
2275 # you can use the escape key in emacs and everything else which needs it.
2277 # You probably don't want to use this on a VMS machine since VMS will think
2278 # it has a vt220 and will get fouled up coming out of emacs
2280 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2281 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2282 vt200-js|vt220-js|dec vt200 series with jump scroll,
2285 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2286 cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2287 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2289 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
2290 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2291 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
2292 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2293 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2294 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2295 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2297 # This was DEC's vt320. Use the purpose-built one below instead
2298 #vt320|DEC VT320 in vt100 emulation mode,
2301 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2303 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2305 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2307 # These entries are not DEC's official ones, they were purpose-built for the
2308 # VT320. Here are the designer's notes:
2309 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2310 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2311 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2312 # Things that use <knxt> usually use tab anyways... and things that don't use
2313 # tab usually use <knxt> instead...
2314 # kprv is same as tab - Backtab is useless...
2315 # I left out <sgr> because of its RIDICULOUS complexity,
2316 # and the resulting fact that it causes the termcap translation of the entry
2317 # to SMASH the 1k-barrier...
2318 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2319 # (vt320: uncommented <fsl> --esr)
2320 vt320|vt300|dec vt320 7 bit terminal,
2321 am, eslok, hs, mir, msgr, xenl,
2322 cols#80, lines#24, wsl#80,
2323 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2324 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2325 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2326 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2327 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2328 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2329 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2330 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
2331 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2333 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2334 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2335 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2336 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2337 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2338 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2339 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2340 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
2341 mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
2342 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2343 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2345 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2347 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2348 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2349 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2350 tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
2351 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2353 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2354 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2356 # We have to init 132-col mode, not 80-col mode.
2357 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2359 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2360 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2362 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2364 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2365 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2368 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2369 # which are pretty much a superset of the VT320. They have the
2370 # host writable status line, yet another different DRCS matrix size,
2371 # and such, but they add the DEC Technical character set, Multiple text
2372 # pages, selectable length pages, and the like. The difference between
2373 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2374 # monitor, the former has 4 planes and a color monitor. These terminals
2375 # support VT131 and ANSI block mode, but as with much of these things,
2376 # termcap/terminfo doesn't deal with these features.
2378 # Note that this entry is are set up in what was the standard way for GNU
2379 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2380 # keys were switched into application mode at the same time the numeric pad
2381 # is switched into application mode. This changes the definitions of the
2382 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2383 # your termcap or terminfo entry,
2385 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2386 # (vt340: string capability "sb=\E[M" corrected to "sr";
2387 # also, added <rmam>/<smam> based on the init string -- esr)
2388 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2389 am, eslok, hs, mir, msgr, xenl, xon,
2390 cols#80, it#8, lines#24, vt#3,
2391 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2392 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2393 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2394 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2395 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2396 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2397 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2398 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2399 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2401 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2402 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2403 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2404 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2405 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2406 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2407 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2408 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2409 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2410 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2411 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2412 tsl=\E[2$~\E[1$}\E[1;%dH,
2414 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2415 # (originally written with vt420 as its primary name, and usable for it).
2417 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2418 # text pages and long text pages with selectable length of the vt340, along
2419 # with left and right margins, rectangular area text copy, fill, and erase
2420 # operations, selected region character attribute change operations,
2421 # page memory and rectangle checksums, insert/delete column, reception
2422 # macros, and other features too numerous to remember right now. TERMCAP
2423 # can only take advantage of a few of these added features.
2425 # Note that this entry is are set up in what was the standard way for GNU
2426 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2427 # keys were switched into application mode at the same time the numeric pad
2428 # is switched into application mode. This changes the definitions of the
2429 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2430 # your termcap entry,
2432 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2433 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2434 # also, added <rmam>/<smam> based on the init string -- esr)
2435 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2436 am, eslok, hs, mir, msgr, xenl, xon,
2437 cols#80, it#8, lines#24, vt#3,
2438 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2439 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2440 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2441 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2442 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2443 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2444 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2445 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2446 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
2447 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2448 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2449 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2450 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2451 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2452 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2453 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2454 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2455 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2456 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2457 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2458 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2459 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2460 tsl=\E[2$~\E[1$}\E[1;%dH,
2462 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2463 # a missing <sc> -- esr)
2466 cols#80, lines#24, vt#3,
2467 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2468 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2469 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2470 cub1=^H, cud1=\E[B, cuf1=\E[C,
2471 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2472 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2473 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2474 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2475 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2476 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2477 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2478 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2479 kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2480 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2481 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2482 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2483 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2484 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2485 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2486 smkx=\E=, smso=\E[7m, smul=\E[4m,
2488 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2489 # takes two parameters, the key and the string. Translating the key is
2490 # straightforward (keys 1-5 are not defined on real terminals, though some
2491 # emulators define these):
2493 # if (key < 16) then value = key;
2494 # else if (key < 21) then value = key + 1;
2495 # else if (key < 25) then value = key + 2;
2496 # else if (key < 27) then value = key + 3;
2497 # else if (key < 30) then value = key + 4;
2498 # else value = key + 5;
2500 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2501 # There's no provision in terminfo for emitting a string in this format, so the
2502 # application has to know it.
2504 vt420pc|DEC VT420 w/PC keyboard,
2505 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2506 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2507 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2508 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2509 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2510 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2511 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2512 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2513 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2514 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2515 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2516 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2517 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2518 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2519 pctrm=USR_TERM\:vt420pcdos\:,
2520 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2523 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2525 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
2527 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2528 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2530 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2531 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2532 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2533 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2534 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2535 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2536 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2541 vt510pc|DEC VT510 w/PC keyboard,
2543 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2548 # The VT520 is a monochrome text terminal capable of managing up to
2549 # four independent sessions in the terminal. It has multiple ANSI
2550 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2551 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2552 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2554 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2555 # [Alt]/[Print Screen] depending upon which keyboard and which
2556 # terminal mode is being used. If Set-Up has been disabled or
2557 # assigned to an unknown key, Set-Up may be entered by pressing
2558 # [F3] as the first key after power up, regardless of keyboard type.
2559 # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
2562 cols#80, lines#24, vt#3,
2563 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2564 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2565 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2566 cub1=^H, cud1=\E[B, cuf1=\E[C,
2567 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2568 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2569 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2570 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2571 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2572 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2573 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2574 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2576 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2577 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2578 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2579 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2580 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2581 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2582 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2583 smso=\E[7m, smul=\E[4m,
2585 # (vt525: I added <rmam>/<smam> based on the init string;
2586 # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
2589 cols#80, lines#24, vt#3,
2590 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2591 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2592 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2593 cub1=^H, cud1=\E[B, cuf1=\E[C,
2594 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2595 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2596 if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
2597 is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
2598 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2599 kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2600 kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2601 kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2603 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2604 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2605 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2606 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2607 rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2608 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
2609 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2610 smso=\E[7m, smul=\E[4m,
2612 #### VT100 emulations
2615 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2616 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2617 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2618 # that this works best with a stock vt100 entry.
2619 dec-vt100|EWAN telnet's vt100 emulation,
2622 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2623 dec-vt220|DOS tnvt200 terminal emulator,
2626 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2627 # anyone who needs PC VT340 emulation. (or anything below that level, for
2628 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2629 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2630 # I can send the address if requested.
2631 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2632 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2633 z340|zstem vt340 terminal emulator 132col 42line,
2635 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2636 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2638 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2640 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2641 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2644 # CRT is shareware. It implements some xterm features, including mouse.
2645 crt|crt-vt220|CRT 2.3 emulating VT220,
2648 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
2650 # PuTTY 0.55 (released 3 August 2004)
2651 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
2653 # Comparing with 0.51, vttest is much better (only a few problems with the
2654 # cursor position reports and wrapping).
2656 # PuTTY 0.51 (released 14 December 2000)
2658 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
2659 # well as SCO and Atari, color palettes from Linux console). Reading the code,
2660 # it is intended to be VT102 plus selected features. By default, it sets $TERM
2661 # to xterm, which is incorrect, since several features are misimplemented:
2663 # Alt+key always sends ESC+key, so 'km' capability is removed.
2665 # Control responses, wrapping and tabs are buggy, failing a couple of
2666 # screens in vttest.
2668 # xterm mouse support is not implemented (unrelease version may).
2670 # Several features such as backspace/delete are optional; this entry documents
2671 # the default behavior -TD
2673 putty|PuTTY terminal emulator,
2674 am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
2675 colors#8, it#8, ncv#22, pairs#64,
2676 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2677 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2678 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2679 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2680 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
2681 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2682 dch=\E[%p1%dP, dch1=\E[P,
2683 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
2684 dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
2685 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2686 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
2687 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
2689 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
2690 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
2691 kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
2692 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
2693 kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2694 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2695 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2696 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2697 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2698 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2699 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
2700 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
2701 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
2702 rmso=\E[27m, rmul=\E[24m,
2703 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
2704 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
2705 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2706 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2707 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
2708 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
2709 tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
2710 vt100-putty|Reset PuTTY to pure vt100,
2711 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
2713 # palette is hardcoded...
2714 putty-256color|PuTTY 0.58 with xterm 256-colors,
2715 initc@, use=xterm+256color, use=putty,
2717 # One of the keyboard selections is "VT100+".
2718 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
2719 putty-vt100|VT100+ keyboard layout,
2720 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
2721 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2722 kf9=\EOX, use=putty,
2724 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2725 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
2726 # (communication program) which supports:
2728 # - Serial port connections.
2729 # - TCP/IP (telnet) connections.
2730 # - VT100 emulation, and selected VT200/300 emulation.
2731 # - TEK4010 emulation.
2732 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2734 # - Scripts using the "Tera Term Language".
2735 # - Japanese and Russian character sets.
2737 # The program does not come with terminfo or termcap entries. However, the
2738 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2739 # vt52 or doublesize character support; blinking is done with color). Besides
2740 # the HPA, VPA extensions it also implements CPL and CNL.
2742 # All of the function keys can be remapped. This description shows the default
2743 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2744 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
2745 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2753 # ANSI colors are implemented, but cannot be combined with video attributes
2754 # except for reverse.
2756 # No fonts are supplied with the program, so the acsc string is chosen to
2757 # correspond with the default Microsoft terminal font.
2759 # Tera Term recognizes some xterm sequences, including those for setting and
2760 # retrieving the window title, and for setting the window size (i.e., using
2761 # "resize -s"), though it does not pass SIGWINCH to the application if the
2762 # user resizes the window with the mouse.
2763 teraterm2.3|Tera Term Pro,
2766 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2767 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2768 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2769 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2770 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2771 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
2772 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
2773 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2774 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2775 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
2776 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2777 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
2778 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
2779 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
2780 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
2781 use=klone+color, use=vt100,
2783 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
2784 # to choose a Windows OEM font).
2786 # Testing with tack:
2787 # - it does not have xenl (suppress that)
2788 # - underline seems to work with color (modify ncv).
2789 # Testing with vttest:
2790 # - wrapping differs from vt100 (menu 1).
2791 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
2793 # - it recognizes the dtterm window controls for reporting size in
2794 # characters and pixels.
2795 # - it passes SIGWINCH.
2796 teraterm4.59|Tera Term Pro,
2799 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2800 kmous=\E[M, use=teraterm2.3,
2805 # Tested with WinNT 4.0, the telnet application assumes the screensize is
2806 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
2809 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
2810 # for casual (occasional) use. Also fails several of the vttest screens,
2811 # but that is not unusual for vt100 "emulators".
2812 # b) Does not implement vt100 keypad
2813 # c) Recognizes a subset of vt52 controls.
2814 ms-vt100|MS telnet imitating dec vt100,
2816 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2817 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
2818 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
2820 # Tested with Windows 2000, the telnet application runs in a console window,
2821 # also using 'Terminal' font.
2824 # a) This version has no function keys or numeric keypad. Unlike the older
2825 # version, the numeric keypad is entirely ignored.
2826 # b) The program sets $TERM to "ansi", which of course is inaccurate.
2827 ms-vt100-color|vtnt|windows 2000 ansi (sic),
2829 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
2832 # Based on comments from Federico Bianchi:
2834 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
2835 # scheme for PF keys.
2837 # and PuTTY wishlist:
2839 # The modifiers are represented as the codes listed above, prefixed to
2840 # the normal sequences. If the modifier is pressed alone, its sequence
2841 # is transmitted twice in succession. If multiple modifiers apply,
2842 # they're transmitted in the order shift, control, alt.
2847 ms-vt100+|vt100+|windows XP vt100+ (sic),
2848 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
2849 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
2850 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
2851 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
2852 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
2853 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
2854 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
2855 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
2856 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
2857 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
2858 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
2859 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
2860 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
2861 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
2862 knp=\E/, kpp=\E?, use=ms-vt100-color,
2864 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
2867 # a minimal subset of a vt100 (compare with "news-unk).
2868 tt|tkterm|Don Libes' tk text widget terminal emulator,
2869 clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
2870 cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2871 kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
2874 #### X terminal emulators
2876 # You can add the following line to your .Xdefaults to change the terminal type
2877 # set by the xterms you start up to my-xterm:
2879 # *termName: my-xterm
2881 # System administrators can change the default entry for xterm instances
2882 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
2883 # case, xterm will detect and reject an invalid terminal type, falling back
2884 # to the default of xterm.
2887 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
2888 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
2889 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
2890 # as these seem not to work -- esr)
2891 x10term|vs100-x10|xterm terminal emulator (X10 window system),
2892 OTbs, am, km, mir, msgr, xenl, xon,
2893 cols#80, it#8, lines#65,
2894 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
2895 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2896 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2897 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
2898 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
2899 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
2900 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2901 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2902 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2903 smso=\E[7m, smul=\E[4m,
2904 # Compatible with the R5 xterm
2905 # (from the XFree86 3.2 distribution, <blink=@> removed)
2906 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
2907 # corrected typos in rs2 string - TD
2909 xterm-r5|xterm R5 version,
2910 OTbs, am, km, msgr, xenl,
2911 cols#80, it#8, lines#24,
2912 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2913 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2914 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2915 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2916 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2917 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2918 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
2919 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
2920 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
2921 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2922 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2923 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2924 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
2925 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2927 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
2929 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
2930 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2931 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
2932 # Compatible with the R6 xterm
2933 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
2934 # added khome/kend, hts based on the R6 xterm code - TD
2935 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
2936 # for compatibility with other emulators).
2937 xterm-r6|xterm-old|xterm X11R6 version,
2938 OTbs, am, km, mir, msgr, xenl,
2939 cols#80, it#8, lines#24,
2940 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2941 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2942 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2943 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2944 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2945 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2946 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
2948 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
2949 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2950 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2951 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2952 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2953 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2954 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2955 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2956 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
2957 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
2958 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2959 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
2960 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
2961 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2963 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
2964 # The name has been changed and some aliases have been removed.
2965 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
2966 OTbs, am, bce, km, mir, msgr, xenl,
2967 cols#80, it#8, lines#24, ncv@,
2968 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2969 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2970 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2971 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2972 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2973 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2974 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2975 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2976 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
2977 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
2979 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
2980 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
2981 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
2982 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2983 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2984 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2985 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2986 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
2987 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
2988 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
2989 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
2990 rmso=\E[27m, rmul=\E[24m, rs1=^O,
2991 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
2992 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2993 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2994 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2995 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
2996 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
2997 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
2998 use=ecma+color, use=vt220+keypad,
3000 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3001 # codes for F1-F4 except while in VT220 mode.
3002 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3003 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3005 # This version was released in XFree86 3.3.3 (November 1998).
3006 # Besides providing printer support, it exploits a new feature that allows
3007 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3008 # -- the distribution contained incorrect khome/kend values -TD
3009 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3011 blink=\E[5m, ich1@, invis=\E[8m,
3012 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3013 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
3014 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
3015 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3016 smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
3018 # This version was released in XFree86 4.0.
3019 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3021 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3022 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3023 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3024 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3025 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3026 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3027 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3028 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3029 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3030 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3031 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3032 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3033 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3034 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3035 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3036 smcup=\E[?1049h, use=xterm-xf86-v333,
3038 # This version was released in XFree86 4.3.
3039 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3040 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3041 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3043 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3046 # This version was released in XFree86 4.4.
3047 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3048 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3049 rin=\E[%p1%dT, use=xterm-xf86-v43,
3051 xterm-xfree86|xterm terminal emulator (XFree86),
3054 # This version reflects the current xterm features.
3055 xterm-new|modern xterm terminal emulator,
3057 indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
3058 kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
3059 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3060 kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
3061 knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
3064 # This fragment describes as much of XFree86 xterm's "pc-style" function
3065 # keys as will fit into terminfo's 60 function keys.
3068 # ---------------------------------
3075 # 8 Shift + Alt + Control
3076 # ---------------------------------
3077 # The meta key may also be used as a modifier in this scheme, adding another
3078 # bit to the parameter.
3079 xterm+pcfkeys|fragment for PC-style fkeys,
3080 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3083 xterm+noapp|fragment with cursor keys in normal mode,
3084 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3087 xterm+app|fragment with cursor keys in application mode,
3088 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3091 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3092 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3093 # the earlier scheme, as noted in the "use=" clauses in this file.
3095 # The original assignments from patch #94 for cursor-keys had some technical
3098 # A parameter for a function-key to represent a modifier is just more
3099 # bits. But for a cursor-key it may change the behavior of the
3100 # application. For instance, emacs decodes the first parameter of a
3101 # cursor-key as a repeat count.
3103 # A parameterized string should (really) not begin with SS3 (\EO).
3104 # Rather, CSI (\E[) should be used.
3106 # For these reasons, the original assignments were deprecated. For
3107 # compatibility reasons, they are still available as a setting of xterm's
3108 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3109 # that might apply to xterm+pcfkeys with different values of that resource.
3110 xterm+pcc3|fragment with modifyCursorKeys:3,
3111 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3112 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3113 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3114 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3115 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3116 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3117 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3118 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3121 xterm+pcc2|fragment with modifyCursorKeys:2,
3122 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3123 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3124 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3125 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3126 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3127 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3128 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3130 xterm+pcc1|fragment with modifyCursorKeys:1,
3131 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
3132 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
3133 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
3134 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
3135 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
3136 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
3138 xterm+pcc0|fragment with modifyCursorKeys:0,
3139 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
3140 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
3141 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
3142 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
3143 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
3144 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
3147 # Here are corresponding fragments from xterm patch #216:
3149 xterm+pcf0|fragment with modifyFunctionKeys:0,
3150 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3151 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3152 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3153 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3154 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3155 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
3156 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3157 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3158 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
3159 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
3160 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3161 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
3162 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
3163 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
3164 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
3165 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
3166 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3168 xterm+pcf2|fragment with modifyFunctionKeys:2,
3169 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3170 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
3171 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
3172 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3173 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
3174 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
3175 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
3176 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
3177 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
3178 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
3179 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
3180 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
3181 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
3182 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
3183 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
3184 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
3185 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
3186 kf8=\E[19~, kf9=\E[20~,
3188 # Chunks from xterm #230:
3189 xterm+pce2|fragment with modifyCursorKeys:2,
3190 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3191 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
3192 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
3193 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
3194 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
3195 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
3196 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
3197 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
3198 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
3199 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
3200 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
3203 xterm+edit|fragment for 6-key editing-keypad,
3204 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3207 xterm+pc+edit|fragment for pc-style editing keypad,
3208 kend=\E[4~, khome=\E[1~,
3210 xterm+vt+edit|fragment for vt220-style editing keypad,
3211 kfnd=\E[1~, kslt=\E[4~,
3214 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
3215 # Alternatively, the same scheme with old-style function keys as in xterm-r6
3216 # is shown here (because that is used in mrxvt and mlterm):
3217 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
3218 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3219 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
3220 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
3221 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
3222 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
3223 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
3224 kf63=\E[13;4~, use=xterm+pcf2,
3226 # This chunk is used for building the VT220/Sun/PC keyboard variants.
3227 xterm-basic|modern xterm terminal emulator - common,
3228 OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
3229 colors#8, cols#80, it#8, lines#24, pairs#64,
3230 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3231 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3232 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
3233 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3234 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3235 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3236 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3237 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3238 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3239 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3240 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
3241 kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
3242 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3243 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
3244 rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
3245 rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
3246 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3247 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3248 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3249 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
3250 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3251 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
3252 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3254 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
3255 # In retrospect, something like xterm-r6 was intended here -TD
3256 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
3257 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
3259 # This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
3260 xterm-16color|xterm with 16 colors like aixterm,
3261 use=ibm+16color, use=xterm-new,
3263 # This is a compile-time feature of XFree86 xterm beginning with
3264 # patch #111 (1999/7/10) -TD
3265 xterm+256color|xterm 256-color feature,
3267 colors#256, pairs#32767,
3268 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
3269 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
3270 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
3273 # This is a compile-time feature of XFree86 xterm beginning with
3274 # patch #115 (1999/9/18) -TD
3276 # Note that the escape sequences used are the same as for 256-colors - xterm
3277 # has a different table of default color resource values. If built for
3278 # 256-colors, it can still handle an 88-color palette by using the initc
3281 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
3282 # which support the xterm+256color feature support the associated initc
3283 # capability. So it is cancelled in the entries which use this and/or the
3284 # xterm+256color block.
3286 # The default color palette for the 256- and 88-colors are different. A
3287 # given executable will have one palette (perhaps compiled-in). If the program
3288 # supports xterm's control sequence, it can be programmed using initc.
3289 xterm+88color|xterm 88-color feature,
3290 colors#88, pairs#7744, use=xterm+256color,
3292 # These variants of XFree86 3.9.16 xterm are built as a configure option.
3293 xterm-256color|xterm with 256 colors,
3294 use=xterm+256color, use=xterm-new,
3295 xterm-88color|xterm with 88 colors,
3296 use=xterm+88color, use=xterm-256color,
3298 # These two are used to demonstrate the any-event mouse support, i.e., by
3299 # using an extended name "XM" which tells ncurses to put the terminal into
3300 # a special mode when initializing the xterm mouse.
3301 xterm-1002|testing xterm-mouse,
3302 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
3303 xterm-1003|testing xterm-mouse,
3304 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
3306 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
3307 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
3308 # To use it, your decTerminalID resource must be set to 200 or above.
3315 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
3316 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
3317 colors#8, cols#80, it#8, lines#24, pairs#64,
3318 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3319 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
3320 civis=\233?25l, clear=\233H\2332J,
3321 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
3322 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
3323 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
3324 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
3325 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3326 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
3327 flash=\233?5h$<100/>\233?5l, home=\233H,
3328 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
3329 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
3330 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3331 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
3332 kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
3333 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
3334 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
3335 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
3336 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
3337 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
3338 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3339 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
3340 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
3341 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
3342 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
3343 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
3345 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
3346 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
3347 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3348 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3349 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
3350 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
3351 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
3352 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
3353 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
3355 xterm-hp|xterm with hpterm function keys,
3356 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3357 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
3358 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
3359 knp=\ES, kpp=\ET, use=xterm-basic,
3361 xterm-sco|xterm with SCO function keys,
3362 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3363 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3364 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3365 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3366 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3367 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3368 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3369 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3370 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3371 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3372 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3373 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
3376 # The xterm-new description has all of the features, but is not completely
3377 # compatible with vt220. If you are using a Sun or PC keyboard, set the
3378 # sunKeyboard resource to true:
3379 # + maps the editing keypad
3380 # + interprets control-function-key as a second array of keys, so a
3381 # 12-fkey keyboard can support vt220's 20-fkeys.
3382 # + maps numeric keypad "+" to ",".
3383 # + uses DEC-style control sequences for the application keypad.
3385 xterm-vt220|xterm emulating vt220,
3386 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3387 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3388 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3389 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
3390 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3391 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3392 use=xterm+app, use=xterm+edit, use=xterm-basic,
3395 xterm-vt52|xterm emulating dec vt52,
3396 cols#80, it#8, lines#24,
3397 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3398 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
3399 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
3400 home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
3401 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
3403 xterm-noapp|xterm with cursor keys in normal mode,
3404 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
3407 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
3408 lines#24, use=xterm-old,
3410 # This is xterm for ncurses.
3411 xterm|xterm terminal emulator (X Window System),
3414 # These entries allow access to the X titlebar and icon name as a status line.
3415 # Note that twm (and possibly window managers descended from it such as tvtwm,
3416 # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
3418 xterm+sl|access X title line and icon name,
3421 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
3422 xterm+sl-twm|access X title line (pacify twm-descended window managers),
3425 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
3428 # The following xterm variants don't depend on your base version
3430 # xterm with bold instead of underline
3431 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
3432 smso=\E[7m, smul=\E[1m, use=xterm-old,
3433 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
3434 # (kterm should not invoke DEC Graphics as the alternate character set
3435 # -- Kenji Rikitake)
3436 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
3437 # -- MATSUMOTO Shoji)
3438 # kterm implements acsc via built-in table of X Drawable's
3439 kterm|kterm kanji terminal emulator (X window system),
3442 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
3443 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
3444 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
3445 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3446 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
3447 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
3448 kterm-color|kterm-co|kterm with ANSI colors,
3449 ncv@, use=kterm, use=ecma+color,
3450 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
3451 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
3452 ich@, ich1@, use=xterm,
3453 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
3454 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
3455 rmcup@, smcup@, use=xterm,
3457 # This describes the capabilities of color_xterm, an xterm variant from
3458 # before ECMA-64 color support was folded into the main-line xterm release.
3459 # This entry is straight from color_xterm's maintainer.
3460 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
3461 # The README's with the distribution also say that it supports SGR 21, 24, 25
3462 # and 27, but they are not present in the terminfo or termcap.
3463 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
3464 OTbs, am, km, mir, msgr, xenl,
3465 cols#80, it#8, lines#65, ncv@,
3466 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3467 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3468 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3469 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3470 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3471 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3472 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
3473 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3474 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
3475 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
3476 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3477 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3478 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
3479 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
3480 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
3481 rmso=\E[27m, rmul=\E[24m,
3482 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
3484 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3485 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
3486 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
3487 smul=\E[4m, use=ecma+color, use=vt220+keypad,
3489 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
3490 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
3491 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
3492 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
3493 # that each of those implements the home, end, delete keys differently.
3495 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
3496 # colors; note that this is not compatible with the 5.2 version.
3497 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
3498 # match XFree86's xterm.terminfo usage and prevent circular links
3499 xterm-color|nxterm|generic color xterm,
3501 op=\E[m, use=xterm-r6, use=klone+color,
3503 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
3504 gnome-rh62|Gnome terminal,
3506 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3509 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
3511 # This implements a subset of vt102 with a random selection of features from
3512 # other terminals such as color and function-keys.
3514 # shift-f1 to shift-f10 are f11 to f20
3516 # NumLock changes the application keypad to approximate vt100 keypad, except
3517 # that there is no escape sequence matching comma (,).
3519 # Other defects observed:
3520 # vt100 LNM mode is not implemented.
3521 # vt100 80/132 column mode is not implemented.
3522 # vt100 DECALN is not implemented.
3523 # vt100 DECSCNM mode is not implemented, so flash does not work.
3524 # vt100 TBC (tab reset) is not implemented.
3525 # xterm alternate screen controls do not restore cursor position properly
3526 # it hangs in tack after running function-keys test.
3527 gnome-rh72|GNOME Terminal,
3529 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
3530 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
3531 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
3532 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
3534 # GNOME Terminal 2.0.1 (Redhat 8.0)
3536 # Documentation now claims it implements vt220 (which is demonstrably false).
3537 # However, it does implement ECH, which is a vt220 feature. And there are
3538 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
3539 # more of its bugs using vttest.
3541 # However, note that bce and msgr are broken in this release. Tabs (tbc and
3542 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
3544 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
3545 # operations. Shift-tab generates a distinct sequence so it can be argued
3546 # that it implements kcbt.
3547 gnome-rh80|GNOME Terminal,
3549 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
3550 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
3552 # GNOME Terminal 2.2.1 (Redhat 9.0)
3554 # bce and msgr are repaired.
3555 gnome-rh90|GNOME Terminal,
3557 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
3558 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
3559 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
3562 # GNOME Terminal 2.14.2 (Fedora Core 5)
3563 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
3564 gnome-fc5|GNOME Terminal,
3566 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3567 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
3569 # GNOME Terminal 2.18.1 (2007 snapshot)
3571 # For any "recent" version of gnome-terminal, it is futile to attempt to
3572 # support modifiers on cursor- and keypad keys because the program usually
3573 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
3574 # of the keys (which more/less correspond to the termcap values), and will
3575 # interpret those according to the $TERM value, but others not in the
3576 # terminfo according to some constantly changing set of hacker guidelines -TD
3577 gnome-2007|GNOME Terminal snapshot 2.18.1,
3578 use=xterm+pcc2, use=gnome-fc5,
3580 # GNOME Terminal 2.22.3 (2008 snapshot)
3582 # In vttest, it claims to be a vt220 with national replacement character-sets,
3583 # but aside from the identifier string, implements only a small fraction of
3584 # vt220's behavior, which will make it less usable on a VMS system (unclear
3585 # what the intent of the developer is, since the NRC feature exposed in vttest
3586 # by this change does not work).
3587 gnome-2008|GNOME Terminal snapshot 2.22.3,
3588 use=gnome+pcfkeys, use=gnome-2007,
3590 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
3591 # supply key information which is not built into the program. With 2.22.3,
3592 # this list is built into the program (which addresses the inadvertant use of
3593 # random terminfo data, though using a set of values which does not correspond
3594 # to any that xterm produces - still not solving the problem that GNOME
3595 # terminal hardcodes the $TERM variable as "xterm").
3597 # terminfo modifier code keys
3598 # kf13-kf24 shift 2 F1 to F12
3599 # kf25-kf36 control 5 F1 to F12
3600 # kf37-kf48 shift/control 6 F1 to F12
3601 # kf49-kf60 alt 3 F1 to F12
3602 # kf61-kf63 shift-alt 4 F1 to F3
3604 # The parameters with \EO (SS3) are technically an error, since SS3 should have
3605 # no parameters. This appears to be rote copying based on xterm+pcc0.
3606 gnome+pcfkeys|gnome variation on xterm+pcfkeys,
3607 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
3608 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
3609 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
3610 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
3611 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
3612 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
3615 gnome|GNOME Terminal,
3618 # palette is hardcoded...
3619 gnome-256color|GNOME Terminal with xterm 256-colors,
3620 initc@, use=xterm+256color, use=gnome,
3622 # XFCE Terminal 0.2.5.4beta2
3624 # This is based on some of the same source code, e.g., the VTE library, as
3625 # gnome-terminal, but has fewer features, fails more screens in vttest.
3626 # Since most of the terminfo-related behavior is due to the VTE library,
3627 # the terminfo is the same as gnome-terminal.
3631 # Multi-Gnome-Terminal 1.6.2
3633 # This does not use VTE, and does have different behavior (compare xfce and
3635 mgt|Multi GNOME Terminal,
3636 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
3638 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
3639 # or not is debatable).
3642 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
3645 # (formerly known as kvt)
3647 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
3648 # simplify this entry (and point out why konsole isn't xterm), we base this on
3649 # xterm-r6. The default keyboard appears to be 'linux'.
3652 # a) konsole implements several features from XFree86 xterm, though none of
3653 # that is documented - except of course in its source code - apparently
3654 # because its implementors are unaccustomed to reading documentation - as
3655 # evidenced by the sparse and poorly edited documentation distributed with
3656 # konsole. Some features such as the 1049 private mode are recognized but
3657 # incorrectly implemented as a duplicate of the 47 private mode.
3658 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
3659 # sends PC-style escapes rather than vt100.
3660 # c) fails vttest menu 3 (Test of character sets) because it does not properly
3661 # parse some control sequences. Also fails vttest Primary Device Attributes
3662 # by sending a bogus code (in the source it says it's supposed to be a
3663 # vt220, which is doubly incorrect because it does not implement vt220
3664 # control sequences except for a few special cases). Treat it as a
3665 # mildly-broken vt102.
3667 # Update for konsole 1.3.2:
3668 # The 1049 private mode works (but see the other xterm screens in vttest).
3669 # Primary Device Attributes now returns the code for a vt100 with advanced
3670 # video option. Perhaps that's intended to be a "mildly-broken vt102".
3672 # Updated for konsole 1.6.4:
3673 # add konsole-solaris
3675 # Updated for konsole 1.6.6:
3676 # add control-key modifiers for function-keys, etc.
3678 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
3679 # different from xterm (and vt100's). They have the same behavior in this
3680 # detail, but it is unclear which copies the other.
3681 konsole-base|KDE console window,
3683 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
3684 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
3685 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
3686 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
3687 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
3688 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
3689 rmso=\E[27m, rmul=\E[24m,
3690 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3691 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3692 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
3693 use=ecma+color, use=xterm-r6,
3694 konsole-linux|KDE console window with linux keyboard,
3695 kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
3696 kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
3697 kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3698 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3700 konsole-solaris|KDE console window with Solaris keyboard,
3701 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3702 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
3703 # than testing the code.
3704 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
3705 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
3706 # The value for kbs reflects local customization rather than the settings used
3707 # for XFree86 xterm.
3708 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
3709 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
3711 # Konsole does not implement shifted cursor-keys.
3712 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
3713 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
3715 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
3716 # it is still useful for deriving the other entries.
3717 konsole-vt100|KDE console window with vt100 (sic) keyboard,
3718 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
3719 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
3720 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
3721 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3722 khome=\E[H, use=konsole-base,
3723 konsole-vt420pc|KDE console window with vt420 pc keyboard,
3724 kbs=^H, kdch1=\177, use=konsole-vt100,
3725 konsole-16color|klone of xterm-16color,
3726 ncv#32, use=ibm+16color, use=konsole,
3727 # make a default entry for konsole
3728 konsole|KDE console window,
3731 # palette is hardcoded...
3732 konsole-256color|KDE console window with xterm 256-colors,
3733 initc@, use=xterm+256color, use=konsole,
3735 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
3737 # It is nominally a vt102 emulator, with features borrowed from rxvt and
3740 # The function keys are numbered based on shift/control/alt modifiers, except
3741 # that the control-modifier itself is used to spawn a new copy of mlterm (the
3742 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
3743 # how it is configured.
3745 # kf1 to kf12 \E[11~ to \E[24~
3746 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
3747 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
3748 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
3749 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
3750 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
3751 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
3752 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
3754 mlterm|multi lingual terminal emulator,
3755 am, eslok, km, mc5i, mir, msgr, npc, xenl,
3756 colors#8, cols#80, it#8, lines#24, pairs#64,
3757 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3758 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3759 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3760 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3761 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3762 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3763 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3764 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
3765 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3766 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
3767 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3768 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3769 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
3770 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
3771 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
3772 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3773 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
3774 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
3775 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
3776 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3777 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3778 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
3779 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3780 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
3781 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
3783 # The insert/delete/home/end keys do not respond to modifiers because mlterm
3784 # looks in its termcap to decide which string to send. If it used terminfo
3785 # (when available), it could use the extended names introduced for xterm.
3786 mlterm+pcfkeys|fragment for PC-style fkeys,
3787 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
3788 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
3789 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
3790 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
3791 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
3792 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
3793 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
3794 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
3795 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
3797 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
3798 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
3801 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
3802 # but some applications don't work with that.
3803 # It also has an AIX extension
3807 # but the latter does not work correctly.
3809 # The distributed terminfo says it implements hpa and vpa, but they are not
3810 # implemented correctly, using relative rather than absolute positioning.
3812 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
3813 # Since rxvt is not really compatible with xterm, it should be configured as
3814 # "rxvt" or "rxvt-color".
3816 # removed dch/dch1 because they are inconsistent with bce/ech -TD
3817 # remove km as per tack test -TD
3818 rxvt-basic|rxvt terminal base (X Window System),
3819 OTbs, am, bce, eo, mir, msgr, xenl, xon,
3820 cols#80, it#8, lines#24,
3821 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3822 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3823 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3824 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3825 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3826 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3827 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
3828 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
3829 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
3830 ind=^J, is1=\E[?47l\E=\E[?1l,
3831 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
3832 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3833 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
3835 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
3836 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
3837 s0ds=\E(B, s1ds=\E(0, sc=\E7,
3838 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3839 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3840 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3841 use=rxvt+pcfkeys, use=vt220+keypad,
3842 # Key Codes from rxvt reference:
3844 # Note: Shift + F1-F10 generates F11-F20
3846 # For the keypad, use Shift to temporarily override Application-Keypad
3847 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
3848 # is off, escape sequences toggle Application-Keypad setting.
3849 # Also note that values of Home, End, Delete may have been compiled
3850 # differently on your system.
3852 # Normal Shift Control Ctrl+Shift
3853 # Tab ^I ESC [ Z ^I ESC [ Z
3854 # BackSpace ^H ^? ^? ^?
3855 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
3856 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
3857 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3858 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
3859 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
3860 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
3861 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
3862 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
3863 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
3864 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
3865 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
3866 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
3867 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
3868 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
3869 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
3870 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
3871 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
3872 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
3873 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
3874 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
3875 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
3876 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
3877 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
3878 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
3879 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
3880 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
3881 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
3882 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
3883 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
3886 # Up ESC [ A ESC [ a ESC O a ESC O A
3887 # Down ESC [ B ESC [ b ESC O b ESC O B
3888 # Right ESC [ C ESC [ c ESC O c ESC O C
3889 # Left ESC [ D ESC [ d ESC O d ESC O D
3890 # KP_Enter ^M ESC O M
3891 # KP_F1 ESC O P ESC O P
3892 # KP_F2 ESC O Q ESC O Q
3893 # KP_F3 ESC O R ESC O R
3894 # KP_F4 ESC O S ESC O S
3895 # XK_KP_Multiply * ESC O j
3896 # XK_KP_Add + ESC O k
3897 # XK_KP_Separator , ESC O l
3898 # XK_KP_Subtract - ESC O m
3899 # XK_KP_Decimal . ESC O n
3900 # XK_KP_Divide / ESC O o
3912 # The source-code for rxvt actually defines mappings for F21-F35, using
3913 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
3914 # are rare, so this entry uses the shift- and control-modifiers as in
3915 # xterm+pcfkeys to define keys past F12.
3917 # kIC is normally not used, since rxvt performs a paste for that (shifted
3918 # insert), unless private mode 35 is set.
3920 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
3921 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
3922 rxvt+pcfkeys|fragment for PC-style fkeys,
3923 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
3924 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
3925 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
3926 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3927 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3928 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3929 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
3930 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
3931 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
3932 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
3933 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
3934 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
3935 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
3936 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3937 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3938 kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
3939 kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
3940 kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
3941 kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
3942 kUP=\E[a, kUP5=\EOa,
3944 rxvt|rxvt terminal emulator (X Window System),
3946 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
3947 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
3948 rxvt-color|rxvt terminal emulator (X Window System),
3950 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
3951 use=xterm+256color, use=rxvt,
3952 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
3953 use=xterm+88color, use=rxvt,
3954 rxvt-xpm|rxvt terminal emulator (X Window System),
3956 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
3957 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3959 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
3960 acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
3963 # This variant is supposed to work with rxvt 2.7.7 when compiled with
3964 # NO_BRIGHTCOLOR defined. rxvt needs more work...
3965 rxvt-16color|xterm with 16 colors like aixterm,
3966 ncv#32, use=ibm+16color, use=rxvt,
3970 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
3971 # makes its function-keys different from other flavors of rxvt -TD
3972 mrxvt|multitabbed rxvt,
3973 use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
3975 # From: Michael Jennings <mej@valinux.com>
3979 # removed kf0 which conflicts with kf10 -TD
3980 # remove cvvis which conflicts with cnorm -TD
3981 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
3982 # but does otherwise follow the rxvt+pcfkeys model -TD
3983 # remove nonworking flash -TD
3984 # remove km as per tack test -TD
3985 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
3986 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
3987 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
3988 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3989 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3990 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3991 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3992 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
3993 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3994 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3995 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3996 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
3997 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3998 is1=\E[?47l\E>\E[?1l,
3999 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
4000 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
4001 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
4002 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4003 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
4004 rmso=\E[27m, rmul=\E[24m,
4005 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4006 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4008 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4009 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4010 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4011 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
4014 Eterm-256color|Eterm with xterm 256-colors,
4015 use=xterm+256color, use=Eterm,
4017 Eterm-88color|Eterm with 88 colors,
4018 use=xterm+88color, use=Eterm,
4020 # Based on rxvt 2.4.8, it has a few differences in key bindings
4021 aterm|AfterStep terminal,
4022 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
4025 # This is not based on xterm's source...
4026 # vttest shows several problems with keyboard, cursor-movements.
4027 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
4028 xiterm|internationalized terminal emulator for X,
4030 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
4032 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4033 # variant of xterm which is apparently no longer supported, but are interesting
4034 # because they illustrate SVr4 curses mouse controls - T.Dickey
4035 xtermm|xterm terminal emulator (monocrome),
4036 OTbs, am, km, mir, msgr, xenl,
4037 btns#3, cols#80, it#8, lines#24,
4038 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4039 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4040 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4041 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4042 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4043 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4044 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4045 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4046 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4047 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4048 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4049 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4050 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4051 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4052 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4053 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4054 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4055 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4056 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4058 xtermc|xterm terminal emulator (color),
4059 colors#8, ncv#7, pairs#64,
4060 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4061 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4062 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4065 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4066 # Here's a termcap entry I've been using for xterm_color, which comes
4067 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4068 # color stuff, I also have a status line defined as the window manager
4069 # title bar. [I have translated it to terminfo -- ESR]
4070 xterm-pcolor|xterm with color used for highlights and status line,
4071 bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
4072 smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
4074 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
4075 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
4076 # chars look like --esr)
4077 hpterm|X-hpterm|hp X11 terminal emulator,
4078 am, da, db, mir, xhp,
4079 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
4080 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
4081 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
4082 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
4083 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
4084 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4085 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4086 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4087 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4088 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
4089 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4090 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4091 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4092 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
4093 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
4095 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4096 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4097 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4098 # HPUX 11 provides a color version.
4099 hpterm-color|HP X11 terminal emulator with color,
4103 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
4104 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
4106 # This entry describes an xterm with Sun-style function keys enabled
4107 # via the X resource setting "xterm*sunFunctionKeys:true"
4108 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4109 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4110 # because we want it to be seen as <kcpy>.
4111 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4112 # with their Sun keyboard labels instead.
4113 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4114 xterm-sun|xterm with sunFunctionKeys true,
4115 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4116 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4117 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4118 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4119 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4120 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4121 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4122 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4123 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4124 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4125 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4126 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4128 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4129 cols#80, lines#24, use=xterm-sun,
4131 # This is for the extensible terminal emulator on the X11R6 contrib tape.
4132 # It corresponds to emu's internal emulation:
4134 # emu's default sets TERM to "xterm", but that doesn't work well -TD
4135 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
4136 # fixes: add civis, cnorm, sgr -TD
4137 emu|emu native mode,
4138 am, bce, mir, msgr, xon,
4139 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
4140 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
4141 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
4142 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
4143 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
4144 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
4145 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
4146 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
4147 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
4148 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
4149 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
4150 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
4151 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
4152 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
4153 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
4154 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
4155 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
4156 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
4158 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
4159 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
4161 # vt220 Terminfo entry for the Emu emulation, corresponds to
4163 # with NumLock set (to make the keypad transmit kf0-kf9).
4164 # fixes: add am, xenl, corrected sgr0 -TD
4165 emu-220|Emu-220 (vt200-7bit mode),
4167 cols#80, it#8, lines#24, vt#200,
4168 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
4169 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
4170 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
4171 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
4172 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
4173 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
4174 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
4175 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
4176 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
4177 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
4178 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4179 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
4180 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
4181 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
4182 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
4183 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
4184 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
4185 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
4186 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
4187 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
4188 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
4189 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4190 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
4191 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
4192 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
4193 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
4194 # indicate that it emulates more than one terminal, but incompletely.
4196 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
4197 # It is based on vt102's entry, with some subtle differences, but also
4199 # supports ANSI colors (except for 'op' string)
4200 # apparently implements alternate screen like xterm
4201 # does not use padding, of course.
4202 mvterm|vv100|SwitchTerm aka mvTERM,
4203 am, eslok, hs, km, mir, msgr, xenl,
4204 colors#8, cols#80, it#8, lines#24, pairs#64,
4205 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4206 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4207 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4208 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4209 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4210 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4211 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
4212 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4213 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
4214 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
4215 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
4216 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4217 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
4219 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
4220 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4221 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4222 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
4223 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4224 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
4228 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
4230 # "mterm -type ansi" sets $TERM to "ansi"
4231 mterm-ansi|ANSI emulation,
4234 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4235 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4236 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
4237 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4238 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
4239 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
4240 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
4241 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
4242 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
4243 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
4245 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4246 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
4248 # mterm normally sets $TERM to "mterm"
4249 mterm|mouse-sun|Der Mouse term,
4252 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
4253 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
4254 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
4255 rmir=^O, rmso=^T, smir=^Q, smso=^V,
4256 # "mterm -type decansi" sets $TERM to "decansi"
4258 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
4259 decansi|ANSI emulation with DEC compatibility hacks,
4260 am, mir, msgr, xenl,
4261 colors#8, it#8, pairs#64,
4262 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4263 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4264 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
4265 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4266 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4267 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4268 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
4269 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
4270 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
4271 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
4272 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
4273 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
4274 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4275 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4276 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4277 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4278 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4279 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
4280 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
4281 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
4282 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4283 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4284 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
4285 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
4286 u7=\E[6n, vpa=\E[%i%p1%dd,
4290 # MGR is a Bell Labs window system lighter-weight than X.
4291 # These entries describe MGR's xterm-equivalent.
4292 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
4295 mgr|Bellcore MGR (non X) window system terminal emulation,
4297 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
4298 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
4299 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
4300 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
4301 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
4302 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
4303 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
4304 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
4305 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
4307 mgr-sun|Mgr window with Sun keyboard,
4308 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
4309 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
4310 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
4311 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
4312 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
4313 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
4314 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
4315 mgr-linux|Mgr window with Linux keyboard,
4316 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
4317 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
4318 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
4319 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4320 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
4322 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
4325 # Columbus UNIX virtual terminal. This terminal also appears in
4326 # UNIX 4.0 and successors as line discipline 1 (?), but is
4327 # undocumented and does not really work quite right.
4328 cbunix|cb unix virtual terminal,
4330 cols#80, lines#24, lm#0,
4331 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4332 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
4333 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
4334 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
4335 smso=\Ea^D, smul=\Ea^A,
4336 # (vremote: removed obsolete ":nl@:" -- esr)
4337 vremote|virtual remote terminal,
4339 cols#79, use=cbunix,
4341 pty|4bsd pseudo teletype,
4342 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
4343 smso=\Ea$, smul=\Ea!, use=cbunix,
4345 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
4346 eterm|gnu emacs term.el terminal emulation,
4349 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
4350 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4351 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4352 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4353 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4354 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
4355 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
4356 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
4357 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
4360 # Entries for use by the `screen' program by Juergen Weigert,
4361 # Michael Schroeder, Oliver Laumann. The screen and
4362 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
4363 # come from University of Wisconsin and may be older.
4364 # (screen: added <cnorm> on ANSI model -- esr)
4366 # 'screen' defines extensions to termcap. Some are used in its terminal
4368 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
4369 # AX (bool) Does understand ANSI set default fg/bg color
4370 # (\E[39m / \E[49m).
4371 # S0 (str) Switch charset 'G0' to the specified charset.
4372 # E0 (str) Switch charset 'G0' back to standard charset.
4374 # tested with screen 3.09.08
4375 screen|VT 100/ANSI X3.64 virtual terminal,
4376 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
4377 colors#8, cols#80, it#8, lines#24, pairs#64,
4378 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4379 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4380 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
4381 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4382 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4383 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4384 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4385 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4386 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4387 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
4388 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4389 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
4390 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4391 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4392 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4393 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
4394 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
4395 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
4396 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4397 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
4398 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
4399 S0=\E(%p1%c, use=ecma+color,
4400 # The bce and status-line entries are from screen 3.9.13 (and require some
4401 # changes to .screenrc).
4402 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
4404 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
4405 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
4407 # ======================================================================
4408 # Entries for GNU Screen with 16 colors.
4409 # Those variations permit to benefit from 16 colors palette, and from
4410 # bold font and blink attribute separated from bright colors. But they
4411 # are less portable than the generic "screen" 8 color entries: Their
4412 # usage makes real sense only if the terminals you attach and reattach
4413 # do all support 16 color palette.
4415 screen-16color|GNU Screen with 16 colors,
4416 use=ibm+16color, use=screen,
4418 screen-16color-s|GNU Screen with 16 colors and status line,
4419 use=ibm+16color, use=screen-s,
4421 screen-16color-bce|GNU Screen with 16 colors and BCE,
4422 use=ibm+16color, use=screen-bce,
4424 screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
4425 bce, use=ibm+16color, use=screen-s,
4427 # ======================================================================
4428 # Entries for GNU Screen 4.02 with --enable-colors256.
4430 screen-256color|GNU Screen with 256 colors,
4432 initc@, use=xterm+256color, use=screen,
4434 screen-256color-s|GNU Screen with 256 colors and status line,
4436 initc@, use=xterm+256color, use=screen-s,
4438 screen-256color-bce|GNU Screen with 256 colors and BCE,
4440 initc@, use=xterm+256color, use=screen-bce,
4442 screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
4444 initc@, use=xterm+256color, use=screen-s,
4446 # ======================================================================
4448 # Read the fine manpage:
4449 # When screen tries to figure out a terminal name for
4450 # itself, it first looks for an entry named "screen.<term>",
4451 # where <term> is the contents of your $TERM variable. If
4452 # no such entry exists, screen tries "screen" (or "screen-w"
4453 # if the terminal is wide (132 cols or more)). If even this
4454 # entry cannot be found, "vt100" is used as a substitute.
4456 # Notwithstanding the manpage, screen uses its own notion of the termcap
4457 # and some keys from "screen.<term>" are ignored. Here is an entry which
4458 # covers those (tested with screen 4.00.02) -TD
4459 screen+fkeys|function-keys according to screen,
4460 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
4463 # Here are a few customized entries which are useful -TD
4466 # (a) screen does not support invis.
4467 # (b) screen's implementation of bw is incorrect according to tack.
4468 # (c) screen appears to hardcode the strings for khome/kend, making it
4469 # necessary to override the "use=" clause's values (screen+fkeys).
4470 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
4471 # which is NOT the same as the terminfo screen.<term>.
4472 # (e) when screen finds one of these customized entries, it sets $TERM to
4473 # match. Hence, no "screen.xterm" entry is provided, since that would
4474 # create heartburn for people running remote xterm's.
4476 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
4477 # since the default translations override the built-in keycode
4478 # translation. They are suppressed here to show what is tested by tack.
4479 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
4481 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
4482 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
4483 use=screen+fkeys, use=xterm-new,
4484 # xterm-r6 does not really support khome/kend unless it is propped up by
4485 # the translations resource.
4486 screen.xterm-r6|screen customized for X11R6 xterm,
4487 bw, use=screen+fkeys, use=xterm-r6,
4488 # Color applications running in screen and TeraTerm do not play well together
4489 # on Solaris because Sun's curses implementation gets confused.
4490 screen.teraterm|disable ncv in teraterm,
4492 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4493 use=screen+fkeys, use=screen,
4495 screen.rxvt|screen in rxvt,
4497 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4498 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
4499 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
4500 # fix the backspace key
4501 screen.linux|screen in linux console,
4503 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
4504 screen.mlterm|screen in mlterm,
4505 use=screen+fkeys, use=mlterm,
4507 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
4508 cols#132, use=screen,
4510 screen2|old VT 100/ANSI X3.64 virtual terminal,
4511 cols#80, it#8, lines#24,
4512 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
4513 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
4514 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4515 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4516 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
4517 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4518 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
4519 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
4520 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
4521 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
4522 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
4523 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
4524 screen3|older VT 100/ANSI X3.64 virtual terminal,
4526 cols#80, it#8, lines#24,
4527 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
4528 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4529 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4530 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
4531 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4532 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
4533 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
4534 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
4535 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
4536 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
4537 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
4538 smul=\E[4m, tbc=\E[3g,
4540 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
4541 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
4542 # been maintained until recently by the National Center for Supercomputer
4543 # Applications, and it is feature rich, stable and free. It can be downloaded
4544 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
4545 # xterm+sl, and the docs at NCSA. It works well.
4547 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
4548 # The terminal options should be set as follows:
4549 # Xterm sequences ON
4550 # use VT wrap mode ON
4551 # use Emacs arrow keys OFF
4552 # CTRL-COMND is Emacs meta ON
4554 # answerback string: "ncsa-vt220-8"
4555 # setup keys: all disabled
4557 # Application mode is not used.
4559 # Other special mappings:
4566 # PAGEDOWN Next Screen
4568 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
4571 # The status-line manipulation is a mapping of the xterm-compatible control
4572 # sequences for setting the window-title. So you must use tsl and fsl in
4573 # pairs, since the latter ends the string that is loaded to the window-title.
4574 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4575 am, hs, km, mir, msgr, xenl,
4576 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4577 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
4578 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4579 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4580 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4581 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4582 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4583 dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
4584 flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
4585 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
4586 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
4587 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
4588 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4589 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
4590 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
4591 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
4592 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
4593 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
4594 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
4595 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
4596 rmso=\E[27m, rmul=\E[24m,
4597 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
4598 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4599 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
4600 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
4601 u8=\E[?62;1;6c, use=ansi+enq,
4602 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4603 use=ncsa-m, use=klone+color,
4604 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
4606 dsl@, fsl@, tsl@, use=ncsa,
4607 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
4609 dsl@, fsl@, tsl@, use=ncsa-m,
4611 # The documented function-key mapping refers to the Apple Extended Keyboard
4612 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
4613 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
4614 # some keyboards and many applications require these as F1-F4.
4616 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
4617 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4618 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4619 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
4620 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
4621 kf8=\E[19~, kf9=\E[20~, use=ncsa,
4623 #### Pilot Pro Palm-Top
4625 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
4626 # http://www.ai/~iang/TGssh/
4627 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
4630 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
4631 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
4632 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
4635 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
4636 # These entries are for the Embeddable Linux Kernel System (ELKS)
4637 # project - an heavily stripped down Linux to be run on 16 bit
4638 # boxes or, eventually, to be used in embedded systems - and have been
4639 # adapted from the stock ELKS termcap. The project itself looks stalled,
4640 # and the latest improvements I know of date back to March 2000.
4642 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
4643 # as an added bonus, this deals with all the capabilities common to
4644 # both VT52 and ANSI (or, eventually, "special") modes.
4646 elks-glasstty|ELKS glass-TTY capabilities,
4648 cols#80, it#8, lines#25,
4649 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
4652 elks-vt52|ELKS vt52 console,
4653 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
4654 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
4655 home=\EH, use=elks-glasstty,
4657 elks-ansi|ELKS ANSI console,
4658 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
4659 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4660 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
4662 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
4663 # instead of VT52, but the "elks" entry still refers to the latter.
4665 elks|default ELKS console,
4668 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
4669 # one but in screen size
4671 sibo|ELKS SIBO console,
4672 cols#61, it#8, lines#20, use=elks-vt52,
4674 ######## COMMERCIAL WORKSTATION CONSOLES
4680 # This is from the OSF/1 Release 1.0 termcap file
4681 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
4684 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4685 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
4686 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
4687 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
4688 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4693 # :is1: resets scrolling region in case a previous user had used "tset vt100"
4694 oldsun|Sun Microsystems Workstation console,
4695 OTbs, am, km, mir, msgr,
4696 cols#80, it#8, lines#34,
4697 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
4698 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4699 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4700 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4701 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4702 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
4703 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
4704 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
4705 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
4706 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
4707 sun-il|Sun Microsystems console with working insert-line,
4710 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4711 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
4712 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
4713 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4714 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4715 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
4716 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
4717 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
4718 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
4719 knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
4720 kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
4721 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
4722 u8=\E[1t, u9=\E[11t,
4723 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
4724 # flake out on the last line. Unfortunately, without them the terminal has no
4726 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
4727 il@, il1@, use=sun-il,
4728 # If you are using an SS5, change the sun definition to use sun-ss5.
4729 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
4732 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
4733 sun-s|Sun Microsystems Workstation window with status line,
4735 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
4736 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
4738 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
4739 sun-48|Sun 48-line window,
4740 cols#80, lines#48, use=sun,
4741 sun-34|Sun 34-line window,
4742 cols#80, lines#34, use=sun,
4743 sun-24|Sun 24-line window,
4744 cols#80, lines#24, use=sun,
4745 sun-17|Sun 17-line window,
4746 cols#80, lines#17, use=sun,
4747 sun-12|Sun 12-line window,
4748 cols#80, lines#12, use=sun,
4749 sun-1|Sun 1-line window for sysline,
4752 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
4753 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
4754 ich1@, rmir@, smir@, use=sun,
4755 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
4757 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
4758 sun-type4|Sun Workstation console with type 4 keyboard,
4759 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
4760 kcuu1=\E[215z, use=sun-il,
4762 # Most of the current references to sun-color are from users wondering why this
4763 # is the default on install. Details from reading the wscons manpage, adding
4764 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
4765 # when those were added -TD
4766 sun-color|Sun Microsystems Workstation console with color support (IA systems),
4768 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
4769 cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
4771 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4772 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4778 # (wsiris: this had extension capabilities
4779 # :HS=\E7F2:HE=\E7F7:\
4780 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
4781 # See the note on Iris extensions near the end of this file.
4782 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
4783 # <flash> from BRL -- esr)
4784 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
4785 OTbs, OTnc, OTpt, am,
4786 OTkn#3, cols#80, it#8, lines#40,
4787 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
4788 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
4789 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
4790 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
4791 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
4792 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
4793 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
4794 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
4799 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
4800 # environment). Note: these have nothing to do with Sony's News workstation
4804 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
4805 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
4806 psterm|psterm-basic|NeWS psterm-80x34,
4807 OTbs, am, hs, km, ul,
4808 cols#80, it#8, lines#34,
4809 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
4810 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
4811 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
4812 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
4813 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
4814 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
4815 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
4817 psterm-96x48|NeWS psterm 96x48,
4818 cols#96, lines#48, use=psterm,
4819 psterm-90x28|NeWS psterm 90x28,
4820 cols#90, lines#28, use=psterm,
4821 psterm-80x24|NeWS psterm 80x24,
4822 cols#80, lines#24, use=psterm,
4823 # This is a faster termcap for psterm. Warning: if you use this termcap,
4824 # some control characters you type will do strange things to the screen.
4825 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
4826 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
4827 OTbs, am, hs, km, ul,
4828 cols#80, it#8, lines#34,
4829 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
4830 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
4831 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
4832 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4833 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
4834 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
4835 smso=^Oo, smul=^Ou, tsl=^Ol,
4839 # Use `glasstty' for the Workspace application
4842 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
4845 cols#80, it#8, lines#24,
4846 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
4847 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
4848 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
4849 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
4850 nextshell|NeXT Shell application,
4853 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
4856 #### Sony NEWS workstations
4859 # (news-unk: this had :KB=news: -- esr)
4860 news-unk|SONY NEWS vt100 emulator common entry,
4861 OTbs, OTpt, am, xenl,
4863 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
4864 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
4865 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
4866 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
4867 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
4868 is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
4869 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
4870 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
4871 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
4872 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4873 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
4874 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4876 # (news-29: this had :TY=ascii: --esr)
4878 lines#29, use=news-unk,
4879 # (news-29-euc: this had :TY=euc: --esr)
4882 # (news-29-sjis: this had :TY=sjis: --esr)
4886 # (news-33: this had :TY=ascii: --esr)
4888 lines#33, use=news-unk,
4889 # (news-33-euc: this had :TY=euc: --esr)
4892 # (news-33-sjis: this had :TY=sjis: --esr)
4896 # (news-42: this had :TY=ascii: --esr)
4898 lines#42, use=news-unk,
4899 # (news-42-euc: this had :TY=euc: --esr)
4902 # (news-42-sjis: this had :TY=sjis: --esr)
4906 # NEWS-OS old termcap entry
4908 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
4909 news-old-unk|SONY NEWS vt100 emulator common entry,
4910 OTbs, OTpt, am, xenl,
4912 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
4913 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
4914 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
4915 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
4916 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4917 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
4918 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4919 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4920 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4922 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
4923 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
4926 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
4929 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
4930 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
4932 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
4935 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
4936 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
4939 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
4942 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
4943 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
4946 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
4949 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
4950 # also the alias vt100-bm.
4951 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
4954 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
4957 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
4958 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
4961 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
4964 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
4965 news28|sony vt100 emulator 28 lines,
4968 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
4971 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
4972 news29|news28-a|sony vt100 emulator 29 lines,
4974 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
4977 # (news511: this had :TY=sjis: --esr)
4978 nwp511|nwp-511|nwp-511 vt100,
4979 OTbs, OTpt, am, xenl,
4981 clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
4982 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
4983 ed=\E[J$<30/>, el=\E[K$<3/>,
4984 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
4985 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
4986 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
4987 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
4988 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
4989 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
4990 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
4991 # (news517: this had :TY=sjis:. --esr)
4992 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
4995 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
4996 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
4997 tsl=\E[1$}\E[;%df, use=vt200,
4998 # (news517-w: this had :TY=sjis:. --esr)
4999 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
5002 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
5003 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5004 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
5005 tsl=\E[1$}\E[;%df, use=vt200,
5007 #### Common Desktop Environment
5010 # This ships with Sun's CDE in Solaris 2.5
5011 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
5012 dtterm|CDE desktop terminal,
5013 am, mir, msgr, xenl, xon,
5014 cols#80, it#8, lines#24, lm#0, ncv@,
5015 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5016 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5017 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5018 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5019 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5020 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5021 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5022 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5023 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
5024 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
5025 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
5026 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5027 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5028 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5029 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5030 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
5031 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5032 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5033 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5034 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
5036 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5037 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
5038 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
5040 #### Non-Unix Consoles
5043 ### EMX termcap.dat compatibility modes
5045 # Keypad: Home=\0G Up=\0H PrPag=\0I
5046 # ka1,kh kcuu1 kpp,ka3
5048 # Left=\0K 5=\0L Right=\0M
5051 # End=\0O Down=\0P NxPag=\0Q
5052 # kc1,kend kcud1 kc3,knp
5057 # On keyboard with 12 function keys,
5058 # shifted f-keys: F13-F24
5059 # control f-keys: F25-F36
5060 # alt f-keys: F37-F48
5061 # The shift/control/alt keys do not modify each other, but alt overrides both,
5062 # and control overrides shift.
5064 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
5065 # no_color_video to inform the application that standout(1), underline(2)
5066 # reverse(4) and invisible(64) don't work with color.
5067 emx-base|DOS special keys,
5070 bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
5071 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
5072 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
5073 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
5074 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
5075 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
5076 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
5077 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
5078 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
5079 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
5080 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
5081 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
5084 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
5085 # a Unix-style environment used on OS/2. (Note that the suffix makes some
5086 # names longer than 14 characters, the nominal maximum).
5088 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
5089 ansi-emx|ANSI.SYS color,
5090 am, bce, eo, mir, msgr, xon,
5091 colors#8, cols#80, it#8, lines#25, pairs#64,
5092 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5093 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
5094 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5095 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
5096 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
5097 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
5098 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
5099 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
5100 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5101 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
5102 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
5103 u9=\E[c, use=emx-base,
5104 # nice colors for Emacs (white on blue, mode line white on cyan)
5105 ansi-color-2-emx|ANSI.SYS color 2,
5106 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
5107 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
5108 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
5109 smul=\E[1;36;44m, use=ansi-emx,
5110 # nice colors for Emacs (white on black, mode line black on cyan)
5111 ansi-color-3-emx|ANSI.SYS color 3,
5112 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
5113 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
5114 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
5115 smul=\E[0;36;40m, use=ansi-emx,
5116 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
5118 cols#80, it#8, lines#24,
5119 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
5120 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
5121 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
5122 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
5123 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
5124 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
5127 # Use this for cygwin32 (tested with beta 19.1)
5128 # underline is colored bright magenta
5129 # shifted kf1-kf12 are kf11-kf22
5130 cygwinB19|ansi emulation for cygwin32,
5131 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5132 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5133 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5134 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5135 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5136 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5137 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
5140 # Use this for cygwin (tested with version 1.1.0).
5141 # I've combined pcansi and linux. Some values of course were different and
5142 # I've indicated which of these were and which I used.
5143 # Cheers, earnie_boyd@yahoo.com
5144 # several changes based on running with tack and comparing with older entry -TD
5145 # more changes from csw:
5147 # remove eo [erase overstrike with blank]
5148 # change clear was \E[H\E[J now \E[2J (faster?)
5151 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
5153 # add cub [cursor back param]
5154 # add cuf [cursor forward param]
5155 # add cuu [cursor up param]
5156 # add cud [cursor down param]
5157 # add hs [has status line]
5158 # add fsl [return from status line]
5159 # add tsl [go to status line]
5160 # add smacs [Start alt charset] (not sure if this works)
5161 # add rmacs [End alt charset] (ditto)
5162 # add smcup [enter_ca_mode] (save console; thanks Corinna)
5163 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
5164 # add kb2 [center of keypad]
5165 # add u8 [user string 8] \E[?6c
5166 # add el [clear to end of line] \E[K
5168 # cnorm [make cursor normal] not implemented
5169 # flash [flash] not implemented
5170 # blink [blink] not implemented very usefully in cygwin? \E[5m
5171 # dim [dim] not implemented very usefully in cygwin? \E[2m
5172 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
5173 # kNXT [shifted next key] not implemented
5174 # kPRV [shifted prev key] not implemented
5175 # khome [home key] really is \E[1~ NOT \E[H
5176 # tbc [clear tab stops] not implemented
5177 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
5178 # smpch [Start PC charset] is \E[11m, same as smacs
5179 # rmpch [End PC charset] is \E[10m, same as rmacs
5180 # mir [move in insert mode] fails in tack?
5181 # bce [back color erase] causes problems with change background color?
5182 # cvvis [make cursor very visible] causes a stackdump when testing with
5183 # testcurs using the output option? \E[?25h\E[?8c
5184 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
5185 # ech [erase characters param] broken \E[%p1%dX
5186 # kcbt [back-tab key] not implemented in cygwin? \E[Z
5189 # Remove cbt since it does not work in current cygwin
5190 # Add 'mir' and 'in' flags based on tack
5191 cygwin|ansi emulation for Cygwin,
5192 am, hs, mir, msgr, xon,
5193 colors#8, it#8, pairs#64,
5194 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5195 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
5196 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5197 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5198 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5199 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
5200 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
5201 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
5202 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5203 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
5204 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5205 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
5206 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
5207 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5208 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
5209 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5210 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
5211 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
5212 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5213 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5214 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
5215 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
5216 vpa=\E[%i%p1%dd, use=vt102+enq,
5218 # I've supplied this so that you can help test new values and add other
5219 # features. Cheers, earnie_boyd@yahoo.com.
5221 # Some features are from pcansi. The op value is from linux. Function-keys
5222 # are from linux. These have been tested not to cause problems. xenl was in
5223 # this list, but DOES cause problems so it has been removed
5224 cygwinDBG|Debug Version for Cygwin,
5225 am, eo, mir, msgr, xon,
5226 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5227 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5228 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
5229 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
5230 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5231 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5232 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5233 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5234 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
5235 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5236 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
5237 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5238 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
5239 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5240 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5241 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
5242 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5243 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5244 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
5245 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
5246 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5247 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5248 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
5249 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
5250 smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
5253 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
5254 # encodings used by other x86 environments. All others are invented for DJGPP.
5255 # Oddly enough, while several combinations of modifiers are tabulated, there is
5256 # none for shifted cursor keys.
5308 # Ctrl-Delete \E[43~
5309 # Ctrl-Down Arrow \E[38~
5312 # Ctrl-Insert \E[42~
5313 # Ctrl-Left Arrow \E[39~
5314 # Ctrl-Page Down \E[46~
5315 # Ctrl-Page Up \E[45~
5316 # Ctrl-Right Arrow \E[40~
5317 # Ctrl-Up Arrow \E[37~
5333 # Alt-Down Arrow \E[60~
5337 # Alt-Left Arrow \E[61~
5338 # Alt-Page Down \E[68~
5339 # Alt-Page Up \E[67~
5340 # Alt-Right Arrow \E[62~
5341 # Alt-Up Arrow \E[59~
5370 djgpp|ansi emulation for DJGPP alpha,
5371 am, bce, msgr, xhp, xon, xt,
5372 colors#8, it#8, pairs#64,
5373 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5374 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5375 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
5376 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5377 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5378 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5379 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5380 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5381 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5382 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
5383 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5384 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
5385 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5386 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5387 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
5388 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
5389 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5390 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
5391 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
5393 djgpp203|Entry for DJGPP 2.03,
5395 cols#80, it#8, lines#25,
5396 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
5399 djgpp204|Entry for DJGPP 2.04,
5401 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
5402 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
5403 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
5404 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5405 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5406 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
5407 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
5408 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5409 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
5410 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5411 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
5412 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5413 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5414 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
5415 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
5416 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
5418 # This is tested using U/Win's telnet. Scrolling is omitted because it is
5419 # buggy. Another odd bug appears when displaying "~" in alternate character
5420 # set (the emulator spits out error messages). Compare with att6386 -TD
5421 uwin|U/Win 3.2 console,
5422 am, eo, in, msgr, xenl, xon,
5423 colors#8, it#8, ncv#58, pairs#64,
5424 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5425 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5426 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
5427 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5428 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
5429 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
5430 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5431 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
5432 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
5433 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
5434 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
5435 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
5436 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
5437 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
5438 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
5439 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
5441 # This entry fits the Windows NT console when the _POSIX_TERM environment
5442 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
5443 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
5444 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
5445 # systems is not, and (surprise!) they match very well.
5447 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
5448 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
5449 # are the installation instructions a pile of mind-numbing bureaucratese,
5450 # but the termcap entry is actually broken and unusable as given; the :do:
5451 # capability is misspelled "d".
5453 # To use this, you need to a bunch of environment variables:
5455 # SET _POSIX_TERM=on
5457 # SET TERMCAP=location of termcap file in POSIX file format
5458 # which is case-sensitive.
5459 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
5462 # Important note: setting the TMP environment variable in POSIX style renders
5463 # it incompatible with a lot of other applications, including Visual C++. So
5464 # you should have a separate command window just for vi. All the other
5465 # variables may be permanently set in the Control Panel\System applet.
5467 # You can find out more about the restrictions of this facility at
5468 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
5470 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
5471 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
5473 cols#80, it#8, lines#25,
5474 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
5475 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
5476 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
5477 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
5478 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
5479 # From: jew@venus.sunquest.com
5480 # Date: 19 Feb 93 23:41:07 GMT
5481 # Here's a combination of ansi and vt100 termcap
5482 # entries that works nearly perfectly for me
5483 # (Gateway 2000 Handbook and Microsoft Works 3.0):
5484 pcmw|PC running Microsoft Works,
5486 cols#80, it#8, lines#24, vt#3,
5487 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
5488 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
5489 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
5490 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
5491 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
5492 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5493 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
5494 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
5495 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
5496 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5497 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
5500 # From: Federico Bianchi
5501 # This is the entry for the OpenNT terminal.
5502 # The ntconsole name is for backward compatability.
5503 # This is for OpenNT 2.0 and later.
5504 # Later OpenNT was renamed to Interix.
5506 # Presently it is distributed by Microsoft as Services For Unix (SFU).
5507 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
5508 # the documentation dates from 1.9.9e) -TD
5510 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
5512 colors#8, cols#80, lines#25, ncv#3, pairs#64,
5513 acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
5514 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
5515 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
5516 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5517 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5518 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
5519 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
5520 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
5521 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
5522 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
5523 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
5524 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
5525 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
5526 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
5527 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
5528 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
5529 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
5530 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
5531 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
5532 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
5533 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
5534 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
5535 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
5536 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
5537 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5538 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
5539 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
5541 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
5542 lines#35, use=opennt,
5544 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
5545 lines#50, use=opennt,
5547 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
5548 lines#60, use=opennt,
5550 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
5551 lines#100, use=opennt,
5553 # OpenNT wide terminals
5554 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
5555 cols#125, use=opennt,
5557 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
5558 lines#35, use=opennt-w,
5560 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
5561 lines#50, use=opennt-w,
5563 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
5564 lines#60, use=opennt-w,
5566 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
5567 cols#132, use=opennt,
5569 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
5570 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
5571 rmcup@, smcup@, use=opennt,
5573 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
5574 lines#35, use=opennt-nti,
5576 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
5577 lines#50, use=opennt-nti,
5579 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
5580 lines#60, use=opennt-nti,
5582 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
5583 lines#100, use=opennt-nti,
5585 ######## COMMON TERMINAL TYPES
5587 # This section describes terminal classes and maker brands that are still
5588 # quite common, but have proprietary command sets not blessed by ANSI.
5593 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
5594 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
5595 # Acer has a web site at http://www.acer.com.
5597 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
5598 # His comments suggest they were shipped with the system.
5601 # (altos2: had extension capabilities
5602 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5603 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5604 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5605 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5606 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5607 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
5608 # :HL=^AP\r:SP=\E[i:\
5609 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5610 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
5611 # Comparison with the k* capabilities makes it obvious that the c* things are
5612 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
5613 # :sr: was given as a boolean-- esr)
5614 altos2|alt2|altos-2|altos II,
5615 cols#80, it#8, lines#24, xmc#0,
5616 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
5617 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
5618 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
5619 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
5620 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
5621 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
5622 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
5623 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5624 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5625 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5626 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5627 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
5628 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
5629 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
5630 # (altos3: had extension capabilities
5631 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5632 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5633 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5634 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5635 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
5636 # :HL=^AP\r:SP=\E[i:\
5637 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
5638 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
5639 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
5640 altos4|alt4|altos-4|altos IV,
5642 # (altos7: had extension capabilities:
5643 # :GG#0:GI=\EH8:GF=\EH7:\
5644 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
5645 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
5646 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
5647 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
5648 # Comparison with the k* capabilities makes it obvious that the c* things are
5649 # shift keys. I have renamed them to keys 32 and up accordingly. I have
5650 # also made this entry relative to adm12 in order to give it an <sgr>. The
5651 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
5652 altos7|alt7|altos VII,
5654 cols#80, lines#24, xmc#0,
5655 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
5656 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5657 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5658 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
5660 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
5661 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
5662 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
5663 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
5664 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
5665 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
5666 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
5667 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
5668 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
5669 rmir=\Er, smir=\Eq, use=adm+sgr,
5670 altos7pc|alt7pc|altos PC VII,
5671 kend=\ET, use=altos7,
5673 #### Hewlett-Packard (hp)
5676 # 8000 Foothills Blvd
5677 # Roseville, CA 95747
5678 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
5679 # 1-(800)-633-3600 (General customer support)
5682 # As of March 1998, HP no longer has any terminals in production.
5683 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
5684 # supported (they still have parts). So are the 2392a and 2394a.
5685 # See the WORKSTATION CONSOLES section for the 700s.
5688 # Generic HP terminal - this should (hopefully) work on any HP terminal.
5689 hpgeneric|hp|hewlett-packard generic terminal,
5690 OTbs, OTpt, am, da, db, mir, xhp,
5691 cols#80, lines#24, lm#0, vt#6,
5692 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5693 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
5694 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
5695 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
5696 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
5699 hp110|hewlett-packard model 110 portable,
5700 lines#16, use=hpgeneric,
5702 hp+pfk+cr|hp function keys with CR,
5703 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
5704 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
5706 hp+pfk-cr|hp function keys w/o CR,
5707 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
5710 # The hp2621s use the same keys for the arrows and function keys,
5711 # but not separate escape sequences. These definitions allow the
5712 # user to use those keys as arrow keys rather than as function
5714 hp+pfk+arrows|hp alternate arrow definitions,
5715 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
5716 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
5717 kll=\Eq\r, kri=\Es\r,
5719 hp+arrows|hp arrow definitions,
5720 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
5721 kind=\ES, kll=\EF, kri=\ET,
5723 # Generic stuff from the HP 262x series
5725 hp262x|HP 262x terminals,
5727 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
5728 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5729 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5730 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
5731 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
5732 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
5733 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
5735 # Note: no <home> on HPs since that homes to top of memory, not screen.
5736 # Due to severe 2621 braindamage, the only way to get the arrow keys to
5737 # transmit anything at all is to turn on the function key labels
5738 # with <smkx>, and even then the user has to hold down shift!
5739 # The default 2621 turns off the labels except when it has to to
5740 # enable the function keys. If your installation prefers labels
5741 # on all the time, or off all the time (at the "expense" of the
5742 # function keys), use 2621-nl or 2621-wl.
5744 # Note: there are newer ROMs for 2621's that allow you to set
5745 # strap A so the regular arrow keys xmit \EA, etc, as with the
5746 # 2645. However, even with this strap set, the terminal stops
5747 # xmitting if you reset it, until you unset and reset the strap!
5748 # Since there is no way to set/unset the strap with an escape
5749 # sequence, we don't use it in the default.
5750 # If you like, you can use 2621-ba (brain-damaged arrow keys).
5751 hp2621-ba|2621 w/new rom and strap A set,
5752 rmkx@, smkx@, use=hp+arrows, use=hp2621,
5754 # hp2621 with function labels. Most of the time they are off,
5755 # but inside vi, the function key labels appear. You have to
5756 # hold down shift to get them to xmit.
5757 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
5758 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
5762 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
5763 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
5764 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
5765 use=hp+pfk+cr, use=hpgeneric,
5767 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
5768 hp2621p|hp 2621 with printer,
5769 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
5771 hp2621p-a|hp2621p with fn as arrows,
5772 use=hp+pfk+arrows, use=hp2621p,
5774 # hp2621 with k45 keyboard
5775 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
5776 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5777 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
5779 # 2621 using all 48 lines of memory, only 24 visible at any time.
5780 hp2621-48|48 line 2621,
5782 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
5785 # 2621 with no labels ever. Also prevents vi delays on escape.
5786 hp2621-nl|hp 2621 with no labels,
5787 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
5790 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
5793 hp2621-nt|hp 2621 w/no tabs,
5796 # Hp 2624 B with 4 or 10 pages of memory.
5798 # Some assumptions are made with this entry. These settings are
5799 # NOT set up by the initialization strings.
5801 # Port Configuration
5806 # Terminal Configuration
5812 # Note: the 2624 DOES have a true <home>, believe it or not!
5814 # The 2624 has an "error line" to which messages can be sent.
5815 # This is CLOSE to what is expected for a "status line". However,
5816 # after a message is sent to the "error line", the next carriage
5817 # return is EATEN and the "error line" is turned back off again!
5818 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
5820 # This entry supports emacs (and any other program that uses raw
5821 # mode) at 4800 baud and less. I couldn't get the padding right
5824 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
5825 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
5828 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
5829 use=hp+labels, use=scrhp,
5831 # This hp2626 entry does not use any of the fancy windowing stuff
5834 # Indeed, terminfo does not yet handle such stuff. Since changing
5835 # any window clears memory, it is probably not possible to use
5836 # this for screen opt.
5838 # ed is incredibly slow most of the time - I am guessing at the
5839 # exact padding. Since the terminal uses xoff/xon this is intended
5840 # only for cost computation, so that the terminal will prefer el
5841 # or even dl1 which is probably faster!
5843 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
5844 # extra slow on the last line of the window.
5846 # The padding probably should be changed.
5848 hp2626|hp2626a|hp2626p|hp 2626,
5851 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
5852 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
5853 use=hp+labels, use=scrhp,
5855 # This entry is for sysline. It allocates a 23 line window with
5856 # a 115 line workspace for regular use, and a 1 line window for
5859 # This assumes port 2 is being used.
5860 # Turn off horizontal line, Create ws #1 with 115 lines,
5861 # Create ws #2 with 1 line, Create window #1 lines 1-23,
5862 # Create window #2 lines 24-24, Attach cursor to workspace #1.
5863 # Note that this clears the tabs so it must be done by tset before
5866 hp2626-s|hp 2626 using only 23 lines,
5869 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
5870 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
5871 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
5872 # Force terminal back to 24 lines after being 23.
5873 hp2626-ns|hp 2626 using all 24 lines,
5874 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
5876 # Various entries useful for small windows on 2626.
5877 hp2626-12|hewlett-packard 2626 12 lines,
5878 lines#12, use=hp2626,
5879 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
5880 cols#40, lines#12, use=hp2626,
5881 hp2626-x40|hewlett-packard 2626 40 columns,
5882 cols#40, use=hp2626,
5883 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
5884 lines#11, use=hp2626-s,
5887 # hp2627 color tubes from University of Wisconsin
5889 hp2627a-rev|hp 2627 with reverse video colors,
5890 cr=^M, cud1=^J, ht=^I, ind=^J,
5891 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
5892 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
5893 smul=\E&dD\E&v1S, use=hp2621-nl,
5894 hp2627a|hp 2627 color terminal with no labels,
5895 cr=^M, cud1=^J, ht=^I, ind=^J,
5896 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
5897 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
5898 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
5900 hp2627c|hp 2627 color (cyan) terminal with no labels,
5901 cr=^M, cud1=^J, ht=^I, ind=^J,
5902 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
5903 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
5905 # hp2640a doesn't have the Y cursor addressing feature, and C is
5906 # memory relative instead of screen relative, as we need.
5909 cup@, rmkx@, smkx@, use=hp2645,
5911 hp2640b|hp2644a|hp 264x series,
5912 rmkx@, smkx@, use=hp2645,
5914 # (hp2641a: removed unknown :gu: -- esr)
5915 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
5916 am, da, db, mir, xhp,
5918 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5919 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
5920 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
5921 if=/usr/share/tabset/std, il1=\EL, ind=^J,
5922 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
5923 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
5926 # This terminal should be used at 4800 baud or less. It needs padding for
5927 # plain characters at 9600, I guessed at an appropriate cr delay. It really
5928 # wants ^E/^F handshaking, but that doesn't work well even if you write
5929 # software to support it.
5930 hp2645|hp45|HP 2645 series,
5932 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
5933 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
5934 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
5935 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
5937 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
5938 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
5939 # You should use this terminal at 4800 baud or less.
5940 hp2648|hp2648a|HP 2648a graphics terminal,
5941 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
5942 dch1=\EP$<7>, ip=$<5>, use=hp2645,
5944 # The HP 150 terminal is a fairly vanilla HP terminal, with the
5945 # clreol standout problem. It also has graphics capabilities and
5946 # a touch screen, which we don't describe here.
5947 hp150|hewlett packard Model 150,
5950 # HP 2382a terminals, "the little ones." They don't have any
5951 # alternate character set support and sending out ^N/^O will
5952 # leave the screen blank.
5953 hp2382a|hp2382|hewlett packard 2382a,
5957 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
5959 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
5960 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
5962 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
5963 use=hp+pfk+arrows, use=hp2621-fl,
5965 # newer hewlett packard terminals
5967 newhpkeyboard|generic entry for HP extended keyboard,
5968 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5969 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
5970 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
5971 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
5974 newhp|generic entry for new hewlett packard terminals,
5975 am, bw, mir, xhp, xon,
5976 cols#80, lines#24, pb#4800,
5977 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
5978 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
5979 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
5980 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
5981 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
5982 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
5983 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
5984 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
5985 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
5986 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
5987 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
5988 tbc=\E3, use=newhpkeyboard,
5990 memhp|memory relative addressing for new HP ttys,
5992 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
5993 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
5994 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
5995 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
5997 scrhp|screen relative addressing for new HP ttys,
5998 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
5999 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
6000 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
6001 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
6002 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
6004 # (hp+labels: added label values from a BRL termcap -- esr)
6005 hp+labels|"standard" label info for new HP ttys,
6007 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
6008 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
6009 rmln=\E&j@, smln=\E&jB,
6011 hp+printer|"standard" printer info for HP ttys,
6012 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
6015 # The new hp2621b is kind of a cross between the old 2621 and the
6016 # new 262x series of machines. It has dip-switched options.
6017 # The firmware has a bug in it such that if you give it a null
6018 # length label, the following character is eaten!
6019 hp2621b|hp 2621b with old style keyboard,
6020 lh#1, lm#48, lw#8, nlab#8,
6021 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6022 kind=\ET, kll=\EF, kri=\ES,
6023 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
6024 smln=\E&jB, use=hp2621,
6026 hp2621b-p|hp 2621b with printer,
6027 use=hp+printer, use=hp2621b,
6029 # hp2621b - new 2621b with new extended keyboard
6030 # these are closer to the new 26xx series than the other 2621b
6031 hp2621b-kx|hp 2621b with extended keyboard,
6032 use=newhpkeyboard, use=hp2621b,
6034 hp2621b-kx-p|hp 2621b with new keyboard & printer,
6035 use=hp+printer, use=hp2621b-kx,
6037 # Some assumptions are made in the following entries.
6038 # These settings are NOT set up by the initialization strings.
6040 # Port Configuration
6041 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
6043 # Terminal Configuration
6044 # InhHndShk(G)=Yes InhDC2(H)=Yes
6045 # XmitFnctn(A)=No InhEolWrp=No
6048 # Hp 2622a & hp2623a display and graphics terminals
6050 hp2622|hp2622a|hp 2622,
6053 is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
6055 # The 2623 is a 2622 with extra graphics hardware.
6056 hp2623|hp2623a|hp 2623,
6059 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
6060 use=hp+printer, use=hp2624,
6062 # The hewlett packard B can have an optional extra 6 pages of memory.
6063 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
6066 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
6067 lm#240, use=hp2624b-p,
6069 # Color manipulations for HP terminals
6070 hp+color|hp with colors,
6072 colors#16, ncv#17, pairs#7,
6073 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
6074 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
6075 op=\E&v0S, scp=\E&v%p1%dS,
6077 # <is2> sets the screen to be 80 columns wide
6078 hp2397a|hp2397|hewlett packard 2397A color terminal,
6079 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
6081 # HP 700/44 Setup parameters:
6082 # Terminal Mode HP-PCterm
6083 # Inhibit Auto Wrap NO
6084 # Status Line Host Writable
6085 # PC Character Set YES
6086 # Twenty-Five Line Mode YES
6087 # XON/XOFF @128 or 64 (sc)
6088 # Keycode Mode NO or YES (sc)
6089 # Backspace Key BS or BS/DEL
6091 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
6092 # \E\\? does not turn off keycode mode
6093 # <smsc> sets alternate start/stop; keycode on
6094 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
6097 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
6098 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
6099 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6100 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6101 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
6103 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
6104 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6105 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
6106 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
6107 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
6108 kpp=\E[5~, rmam=\E[?7l,
6109 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
6110 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
6111 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
6112 smul=\E[4m, xoffc=g, xonc=e,
6114 # (hp2392: copied <rmir> here from hpex -- esr)
6117 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
6118 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
6119 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
6120 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
6123 hpsub|hp terminals -- capability subset,
6124 am, da, db, mir, xhp, xon,
6126 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6127 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
6128 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
6129 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
6130 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
6131 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
6134 # May be used for most 24 x 80 hp terminals,
6135 # but has no padding added, so may allow runover in some terminals at high
6136 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
6137 # hp98x5 terminal emulators or hp98x6 consoles.
6138 # Adds xy-cursor addressing, vertical cursor addressing, home,
6139 # last line, and underline capabilities.
6141 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
6142 # moved <rmir> here from hpsub -- esr)
6143 hpex|hp extended capabilites,
6144 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
6145 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
6146 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
6148 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
6149 hp2|hpex2|hewlett-packard extended capabilities newer version,
6150 am, da, db, mir, xhp,
6151 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
6152 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6153 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6154 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6155 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6156 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6157 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6158 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6159 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6160 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
6161 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6162 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6163 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6164 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
6165 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6166 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6167 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
6168 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6171 # From: <ddavis@ic.berkeley.edu>
6172 hp236|hp236 internal terminal emulator,
6175 clear=\EF, cnorm=\EDE, cub1=^H,
6176 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
6177 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
6178 sgr0=\ECI, smso=\EBI,
6180 # This works on a hp300 console running Utah 4.3 BSD
6181 # From: Craig Leres <leres@okeeffe.berkeley.edu>
6182 hp300h|HP Catseye console,
6183 OTbs, am, da, db, mir, xhp,
6184 cols#128, lines#51, lm#0, xmc#0,
6185 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
6186 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6187 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6188 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
6189 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
6190 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
6191 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
6193 # From: Greg Couch <gregc@ernie.berkeley.edu>
6194 hp9837|hp98720|hp98721|HP 9000/300 workstations,
6195 OTbs, am, da, db, mir, xhp,
6196 cols#128, it#8, lines#46, lm#0,
6197 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
6198 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
6199 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6200 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
6201 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6202 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
6203 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
6204 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
6205 tbc=\E3, vpa=\E&a%p1%dY,
6206 # HP 9845 desktop computer from BRL
6207 # (hp9845: removed unknown capability :gu: -- esr)
6209 OTbs, am, da, db, eo, mir, xhp,
6211 OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
6212 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
6213 if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
6214 smir=\EQ, smso=\E&dB,
6215 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
6216 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
6217 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
6218 hp98550|hp98550a|HP 9000 Series 300 color console,
6219 OTbs, am, da, db, mir, xhp,
6220 cols#128, it#8, lines#49, lm#0,
6221 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
6222 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
6223 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
6224 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
6225 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
6226 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6227 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6228 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6229 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6230 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
6231 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
6232 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
6233 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6234 # From: Victor Duchovni <vic@fine.princeton.edu>
6235 # (hp700-wy: removed obsolete ":nl=^J:";
6236 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
6237 hp700-wy|HP700/41 emulating wyse30,
6238 OTbs, am, bw, mir, msgr,
6239 cols#80, it#8, lines#24, xmc#1,
6240 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
6241 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6242 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
6243 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
6244 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
6245 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
6246 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
6247 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
6248 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
6249 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
6250 hp70092|hp70092a|hp70092A|HP 700/92,
6252 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
6253 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
6254 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
6255 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
6256 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
6257 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
6258 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
6259 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
6260 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
6261 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
6262 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
6263 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
6264 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
6265 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
6267 bobcat|sbobcat|HP 9000 model 300 console,
6268 am, da, db, mir, xhp,
6269 cols#128, it#8, lines#47, xmc#0,
6270 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
6271 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
6272 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
6273 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
6274 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
6275 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
6276 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
6277 gator-t|HP 9000 model 237 emulating extra-tall AAA,
6278 lines#94, use=gator,
6279 gator|HP 9000 model 237 emulating AAA,
6281 cols#128, it#8, lines#47,
6282 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
6283 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
6284 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
6285 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
6286 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
6287 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6288 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
6289 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6290 gator-52|HP 9000 model 237 emulating VT52,
6291 cols#128, lines#47, use=vt52,
6292 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
6293 lines#94, use=gator-52,
6297 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
6300 # Honeywell Bull terminal. Its cursor and function keys send single
6301 # control characters and it has standout/underline glitch. Most programs
6302 # do not like these features/bugs. Visual bell is realized by flashing the
6303 # "keyboard locked" LED.
6304 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
6306 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
6307 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
6308 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
6309 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
6310 dku7003|Honeywell Bull DKU 7003 all features described,
6313 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
6314 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
6317 #### Lear-Siegler (adm)
6319 # These guys are long since out of the terminals business, but
6320 # in 1995 many current terminals still have an adm type as one of their
6321 # emulations (usually their stupidest, and usually labeled adm3, though
6322 # these `adm3' emulations normally have adm3a+ capabilities).
6324 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
6325 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
6326 # was being held to ground would trigger a send of the top line on the screen.
6327 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
6328 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
6329 # for clearing up this point.)
6331 adm1a|adm1|lsi adm1a,
6334 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6335 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
6340 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6341 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6342 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
6343 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
6344 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
6348 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
6349 # The following ADM-3A switch settings are assumed for normal operation:
6350 # SPACE U/L_DISP CLR_SCRN 24_LINE
6351 # CUR_CTL LC_EN AUTO_NL FDX
6352 # Other switches may be set for operator convenience or communication
6353 # requirements. I recommend
6354 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
6356 # Most of these terminals required an option ROM to support lower case display.
6357 # Open the case and look at the motherboard; if you see an open 24-pin DIP
6358 # socket, you may be out of luck.
6360 # (adm3a: some capabilities merged in from BRl entry -- esr)
6364 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
6365 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6366 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
6370 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
6373 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
6374 rmso=\EG, smso=\EG, use=adm3a+,
6375 # A lot of terminals other than adm11s use these. Wherever you see
6376 # use=adm+sgr with some of its capabilities disabled, try the
6377 # disabled ones. They may well work but not have been documented or
6378 # expressed in the using entry. We'd like to cook up an <sgr> but the
6379 # <rmacs>/<smacs> sequences of the using entries vary too much.
6380 adm+sgr|adm style highlight capabilities,
6381 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
6382 smso=\EG4, smul=\EG8,
6383 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
6384 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
6385 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
6386 # be ^Z, according to his entry.
6387 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
6388 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
6391 OTkn#8, cols#80, lines#24,
6392 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
6393 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6394 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
6395 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6396 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6397 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
6399 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
6400 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
6401 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
6402 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
6403 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
6404 # via BRL. That entry asserted <xmc#1>, but I've left that out because
6405 # neither earlier nor later ADMSs have it -- esr)
6407 # You will need to get into the supervisor setup before you can set
6408 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
6409 # see a lot more setup options.
6411 # While in supervisor setup you can also use following codes:
6413 # Ctrl-P Personality character selections (configure for example what
6414 # arrow keys send, if I recall correctly)
6415 # Ctrl-T tabs 1-80 use left&right to move and up to set and
6416 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
6417 # Ctrl-B Binary setup (probably not needed. I think that everything can
6418 # be set using normal setup)
6419 # Ctrl-A Answerback mode (enter answerback message)
6420 # Ctrl-U User friendly mode (normal setup)
6421 # Ctrl-D Defaults entire setup and function keys from EPROM tables
6422 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
6423 # Ctrl-R Reads both setup and functions keys from NVM.
6424 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
6426 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
6427 # RTS/CTS used nowadays with virtually every modem and computer. 19200
6428 # bps works fine with hardware flow control.
6430 # The following null-modem cable should fix this and enable you to use
6431 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
6432 # set ADM-12+ for DTR handshaking from supervisor setup.
6445 OTbs, OTpt, am, mir,
6446 OTug#1, cols#80, it#8, lines#24,
6447 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6448 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6449 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
6450 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
6451 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6452 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6453 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
6455 # (adm20: removed obsolete ":kn#7:" -- esr)
6456 adm20|lear siegler adm20,
6458 cols#80, it#8, lines#24,
6459 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
6460 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
6461 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
6462 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
6464 adm21|lear siegler adm21,
6466 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
6467 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
6468 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
6470 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
6471 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
6472 # removed bogus-looking \200 from before <cup>. -- esr)
6476 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6477 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6478 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
6479 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
6480 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
6481 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6482 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
6483 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
6484 # ADM 31 DIP Switches
6486 # This information comes from two versions of the manual for the
6487 # Lear-Siegler ADM 31.
6491 # +-||||-------------------------------------+
6506 # +----------------------------------------------+
6507 # front of case (keyboard)
6509 # S1 - Data Rate - Modem
6510 # S2 - Data Rate - Printer
6511 # ------------------------
6513 # -------------------
6531 # S3 - Interface/Printer/Attributes
6532 # ---------------------------------
6533 # Printer Busy Control
6536 # off off off Busy not active, CD disabled
6537 # off off on Busy not active, CD enabled
6538 # off on off Busy active on J5-20, CD disabled
6539 # on off off Busy active on J5-19, CD disabled - Factory Set.
6540 # on off on Busy active on J5-19, CD enabled
6542 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
6544 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
6546 # sw6 ON enables printer BUSY active LOW - Factory Setting
6547 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
6549 # sw7 ON - steady cursor - Factory Setting
6550 # OFF - blinking cursor
6552 # sw8 ON causes selected attribute character to be displayed
6553 # OFF causes SPACE to be displayed instead - Factory Setting
6559 # sw4 sw1 sw2 sw3 sw4
6560 # ---------------------------
6561 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
6562 # Current Loop disabled - Factory Setting
6563 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
6565 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
6566 # Current Loop Disabled
6568 # sw5 ON disables dot stretching mode - Factory Setting
6569 # OFF enables dot stretching mode
6570 # sw6 ON enables blanking function
6571 # OFF enables underline function - Factory Setting
6572 # sw7 ON causes NULLS to be displayed as NULLS
6573 # OFF causes NULLS to be displayed as SPACES - Factory Setting
6575 # S5 - Word Structure
6576 # -------------------
6577 # sw1 ON enables BREAK key - Factory Setting
6578 # OFF disables BREAK key
6579 # sw2 ON selects 50Hz monitor refresh rate
6580 # OFF selects 60Hz monitor refresh rate - Factory Setting
6582 # Modem Port Selection
6585 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
6586 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
6587 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
6588 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
6589 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
6590 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
6591 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
6592 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
6594 # sw6 ON sends bit 8 a 1 (mark)
6595 # OFF sends bit 8 as 0 (space) - Factory Setting
6596 # sw7 ON selects Block Mode
6597 # OFF selects Conversation Mode - Factory Setting
6598 # sw8 ON selects Full Duplex operation
6599 # OFF selects Half Duplex operation - Factory Setting
6603 # sw1, sw2, sw6, sw7 Reserved - Factory 0
6605 # Printer Port Selection
6606 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
6608 # sw8 ON enables Printer Port
6609 # OFF disables Printer Port - Factory Setting
6611 # S7 - Polling Address
6612 # --------------------
6613 # sw1-7 Establish ASCII character which designates terminal polling address
6615 # OFF = logic 1 - Factory Setting
6616 # sw8 ON enables Polling Option
6617 # OFF disables Polling Option - Factory Setting
6620 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
6622 # This adm31 entry uses underline as the standout mode.
6623 # If the adm31 gives you trouble with standout mode, check the DIP switch in
6624 # position 6, bank @c11, 25% from back end of the circuit board. Should be
6625 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
6626 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
6627 adm31|lsi adm31 with sw6 set for underline mode,
6630 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6631 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6632 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
6633 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
6634 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
6635 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
6636 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
6637 adm31-old|o31|old adm31,
6638 rmul@, smso=\EG4, smul@, use=adm31,
6639 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
6643 if=/usr/share/tabset/vt100,
6644 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
6646 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
6650 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6651 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6652 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
6653 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
6654 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
6655 smir=\Eq, smul@, use=adm+sgr,
6656 # The following termcap for the Lear Siegler ADM-42 leaves the
6657 # "system line" at the bottom of the screen blank (for those who
6658 # find it distracting otherwise)
6659 adm42-ns|lsi adm-42 with no system line,
6660 cbt=\EI\EF \011, clear=\E;\EF \011,
6661 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
6662 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
6663 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
6664 smir=\Eq\EF \011, use=adm42,
6665 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
6666 # The insert mode of this terminal is commented out because it's broken for our
6667 # purposes in that it will shift the position of every character on the page,
6668 # not just the cursor line!
6669 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
6670 adm1178|1178|lsi adm1178,
6672 cols#80, lines#24, xmc#1,
6673 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
6674 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6675 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
6676 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
6677 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
6678 sgr0=\E), smso=\EG4, smul=\EG1,
6682 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
6683 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
6684 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
6686 # ComputerVision Services
6687 # 500 Old Connecticut Path
6691 # Standout mode is dim reverse-video.
6692 pt100|pt200|wren|fenix|prime pt100/pt200,
6694 cols#80, it#8, lines#24,
6695 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
6696 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
6697 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
6698 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
6699 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
6700 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
6701 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
6702 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
6704 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
6705 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
6706 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
6708 cup=\E[%i%p1%d;%p2%dH, use=pt100,
6710 rmso@, smso@, use=pt100,
6711 pt250w|Prime PT250 in 132-column mode,
6712 rmso@, smso@, use=pt100w,
6717 # 3475-A North 1st Street
6719 # Vox: (800)-457-4447
6720 # Fax: (408)-473-1510
6721 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
6723 # Qume was bought by Wyse, but still (as of early 1995) has its own support
6724 # group and production division.
6726 # Discontinued Qume models:
6728 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
6729 # built to replace them, and a qvt119+ which was a 101+ with available wide
6730 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
6731 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
6732 # ANSI-compatible terminals with the qvt323 and qvt61.
6734 # Current Qume models (as of February 1995):
6736 # All current Qume terminals have ANSI-compatible operation modes.
6737 # Qume is still producing the qvt62, which features emulations for other
6738 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
6739 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
6740 # with many emulations including Wyse370, Wyse 325, etc. Their newest
6741 # model is the qvt520, which is vt420-compatible.
6743 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
6745 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
6746 # setup mode. Shift-s should be a configuration save to NVRAM.
6748 qvt101|qvt108|qume qvt 101 and QVT 108,
6751 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
6752 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
6753 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
6754 # What seems to be going on here is that this entry was designed so that
6755 # the normal highlight is bold and standout is dim plus something else
6756 # (reverse-video maybe? But then, are there two <rev> sequences?)
6757 qvt101+|qvt101p|qume qvt 101 PLUS product,
6759 cols#80, lines#24, xmc#0,
6760 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
6761 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6762 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
6763 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
6764 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
6765 kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
6766 kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
6767 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
6768 khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
6769 smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6770 qvt102|qume qvt 102,
6771 cnorm=\E., use=qvt101,
6772 # (qvt103: added <rmam>/<smam> based on init string -- esr)
6773 qvt103|qume qvt 103,
6775 cols#80, it#8, lines#24, vt#3,
6776 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
6777 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
6778 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
6779 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
6780 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
6781 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
6782 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6783 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
6784 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
6785 rmso=\E[m$<2>, rmul=\E[m$<2>,
6786 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6787 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
6788 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
6789 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
6790 qvt103-w|qume qvt103 132 cols,
6792 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
6793 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
6795 cols#80, lines#24, xmc#0,
6796 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
6797 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
6798 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
6799 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
6800 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
6801 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
6802 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
6803 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6804 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
6805 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
6806 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
6807 lines#25, use=qvt119+,
6808 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
6810 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
6811 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
6812 lines#25, use=qvt119+,
6813 qvt203|qvt203+|qume qvt 203 Plus,
6814 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
6815 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
6816 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
6817 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
6818 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
6820 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
6822 # Since a command is present for enabling 25 data lines,
6823 # a specific terminfo entry may be generated for the 203.
6824 # If one is desired for the QVT 119 PLUS then 25 lines must
6825 # be selected in the status line (setup line 9).
6827 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
6829 is2=\E[=40h\E[?3l, use=qvt203,
6830 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
6832 rs2=\E[?3h\E[=40h, use=qvt203,
6834 #### Televideo (tvi)
6837 # 550 East Brokaw Road
6838 # PO Box 49048 95161
6840 # Vox: (408)-954-8333
6841 # Fax: (408)-954-0623
6844 # These require incredible amounts of padding.
6846 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
6847 # Televideo terminals are ANSI and PC-ANSI compatible.
6849 tvi803|televideo 803,
6850 clear=\E*$<10>, use=tvi950,
6852 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
6853 # Switch settings are:
6874 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
6890 # U do CR/LF when CR received
6891 # D do CR when CR received
6913 # S2 6 Cursor down key
6917 # S2 7 Screen colour
6921 # S2 8 DSR status (pin 6)
6925 # S2 9 DCD status (pin 8)
6929 # S2 10 DTR status (pin 20)
6932 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
6933 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
6934 tvi910|televideo model 910,
6936 cols#80, it#8, lines#24, xmc#1,
6937 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6938 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
6939 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
6940 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
6941 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
6942 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6943 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
6944 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
6945 # From: Alan R. Rogers <rogers%albany@csnet-relay>
6946 # as subsequently hacked over by someone at SCO
6947 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
6949 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
6952 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
6953 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
6954 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
6955 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
6958 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
6959 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
6960 # D U D D 8O1 D U U U 8E2
6962 # S1 9 Autowrap (U = on, D = off)
6963 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
6964 # S2 1 Mode (U = block, D = conversational)
6965 # S2 2 Duplex (U = half, D = full)
6966 # S2 3 Hertz (U = 50, D = 60)
6967 # S2 4 Edit mode (U = local, D = duplex)
6968 # S2 5 Cursor type (U = underline, D = block)
6969 # S2 6 Cursor down key (U = send ^J, D = send ^V)
6970 # S2 7 Screen colour (U = green on black, D = black on green)
6971 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
6972 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
6973 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
6975 tvi910+|televideo 910+,
6976 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
6977 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
6978 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
6979 ll=\E=7\s, use=tvi910,
6981 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
6982 # <khome> from BRL entry -- esr)
6983 tvi912|tvi914|tvi920|old televideo 912/914/920,
6984 OTbs, OTpt, am, msgr,
6985 cols#80, it#8, lines#24, xmc#1,
6986 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6987 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
6988 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
6989 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
6990 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
6991 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
6992 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
6993 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
6995 # We got some new tvi912c terminals that act really weird on the regular
6996 # termcap, so one of our gurus worked this up. Seems that cursor
6997 # addressing is broken.
6998 tvi912cc|tvi912 at cowell college,
7001 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
7002 # From: Benjamin C. W. Sittler
7004 # Someone has put a scanned copy of the manual online at:
7005 # http://vt100.net/televideo/912b-om/
7007 # These terminals were produced ca. 1979, and had a 12" monochrome
7008 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
7009 # ASCII, and were generally similar to adm3a but with attributes
7010 # (including some with magic cookies), fancy half-duplex mode, and
7013 # Some operations reqire truly incredible amounts of padding. The
7014 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
7015 # are so slow as to be nearly unusable.
7017 # There may or may not have been a separate, earlier series of 912/920
7018 # terminals (without the "B" and "C" suffix); I have never seen one,
7019 # and the manual only describes the "B" and "C" series. The 912 and 920
7020 # are quite distinct from the 914 and 924, which were much nicer non-
7021 # magic-cookie terminals similar to the 950.
7023 # This is a new description for the following TeleVideo terminals,
7024 # distinguished chiefly by their keyboards:
7026 # TVI-912B - very odd layout, no function keys (84 keys)
7027 # TVI-920B - typewriter layout, no function keys (103 keys)
7028 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
7029 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
7031 # To choose a setting for the TERM variable, start with the model:
7033 # Model || base name
7034 # ----------||-----------
7035 # TVI-912B || tvi912b
7036 # TVI-912C || tvi912c
7037 # TVI-920B || tvi920b
7038 # TVI-920C || tvi920c
7040 # Then add a suffix from the following table describing installed options
7041 # and how you'd like to use the terminal:
7043 # Use Video | Second | Visual | Magic | Page || feature
7044 # Attributes | Page | Bell | Cookies | Print || suffix
7045 # ------------|--------|--------|---------|-------||---------
7046 # No | No | N/A | N/A | No || -unk
7047 # No | No | N/A | N/A | Yes || -p
7048 # No | Yes | No | N/A | No || -2p-unk
7049 # No | Yes | No | N/A | Yes || -2p-p
7050 # No | Yes | Yes | N/A | No || -vb-unk
7051 # No | Yes | Yes | N/A | Yes || -vb-p
7052 # Yes | No | N/A | No | N/A ||
7053 # Yes | No | N/A | Yes | N/A || -mc
7054 # Yes | Yes | No | No | N/A || -2p
7055 # Yes | Yes | No | Yes | N/A || -2p-mc
7056 # Yes | Yes | Yes | No | N/A || -vb
7057 # Yes | Yes | Yes | Yes | N/A || -vb-mc
7059 # So e.g. a model 920 C with second page memory option, visual bell
7060 # and no magic cookies would be tvi920c-vb; a model 912 B without the
7061 # second page memory option and using magic cookies would be
7066 # At 9600 baud, the terminal is prone to overflow its input buffer
7067 # during complex operations (insert/delete
7068 # character/line/screen/page), and it does not signal this over the
7069 # RS232 cable. The typical symptom of an overrun is that the terminal
7070 # starts beeping, and output becomes garbled.
7072 # The padding delays in this terminfo were derived using tack(1)
7073 # running on a Linux box connected to a TVI-920C with a later-model
7074 # (A49C1-style) ROM running at 9600 baud, so your mileage may
7075 # vary. The numbers below seem to give the terminal enough time so
7076 # that it doesn't overflow its input buffer and start losing
7081 # If you want to use the FUNCT key on a tvi912[bc], use the
7082 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
7083 # the following table (these also work on the 920 series):
7085 # Unshifted Function Keys:
7087 # Key | capname|| Equivalent
7088 # -----|--------||------------
7089 # F1 | <kf1> || FUNCT + @
7090 # F2 | <kf2> || FUNCT + A
7091 # F3 | <kf3> || FUNCT + B
7092 # F4 | <kf4> || FUNCT + C
7093 # F5 | <kf5> || FUNCT + D
7094 # F6 | <kf6> || FUNCT + E
7095 # F7 | <kf7> || FUNCT + F
7096 # F8 | <kf8> || FUNCT + G
7097 # F9 | <kf9> || FUNCT + H
7098 # F10 | <kf10> || FUNCT + I
7099 # F11 | <kf11> || FUNCT + J
7101 # Shifted Function Keys:
7103 # SHIFT + Key | capname|| Equivalent
7104 # -------------|--------||------------
7105 # SHIFT + F1 | <kf12> || FUNCT + `
7106 # SHIFT + F2 | <kf13> || FUNCT + a
7107 # SHIFT + F3 | <kf14> || FUNCT + b
7108 # SHIFT + F4 | <kf15> || FUNCT + c
7109 # SHIFT + F5 | <kf16> || FUNCT + d
7110 # SHIFT + F6 | <kf17> || FUNCT + e
7111 # SHIFT + F7 | <kf18> || FUNCT + f
7112 # SHIFT + F8 | <kf19> || FUNCT + g
7113 # SHIFT + F9 | <kf20> || FUNCT + h
7114 # SHIFT + F10 | <kf21> || FUNCT + i
7115 # SHIFT + F11 | <kf22> || FUNCT + j
7117 # PORTS AND SWITCH SETTINGS
7119 # Here are the switch settings for the TVI-912B/TVI-920B and
7120 # TVI-912C/TVI-920C:
7122 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
7123 # 2: 9600 3: 4800 4: 2400 5: 1200
7124 # 6: 600 7: 300 8: 150 9: 75
7127 # S2 UART/Terminal options:
7129 # 1: Not used Not allowed
7130 # 2: Alternate character set Standard character set
7131 # 3: Full duplex Half duplex
7132 # 4: 50 Hz refresh 60 Hz refresh
7133 # 5: No parity Send parity
7134 # 6: 2 stop bits 1 stop bit
7135 # 7: 8 data bits 7 data bits
7136 # 8: Not used Not allowed on Rev E or lower
7137 # 9: Even parity Odd parity
7138 # 10: Steady cursor Blinking cursor
7139 # (On Rev E or lower, use W25 instead of switch 10.)
7141 # S5 UART/Terminal options:
7143 # 1: P3-6 Not connected DSR received on P3-6
7144 # 2: P3-8 Not connected DCD received on P3-8
7146 # 3 Open, 4 Open: P3-20 Not connected
7147 # 3 Open, 4 Closed: DTR on when terminal is on
7148 # 3 Closed, 4 Open: DTR is connected to RTS
7149 # 3 Closed, 4 Closed: Not allowed
7151 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
7152 # all data transmitted out of the modem port (P3) will also be
7153 # transmitted out of the printer port (P4).
7155 # 6 Open, 7 Open: Not allowed
7156 # 6 Open, 7 Closed: 20ma current loop input
7157 # 6 Closed, 7 Open: RS232 input
7158 # 6 Closed, 7 Closed: Not allowed
7161 # If the jumper is installed, the effect will occur (the next time the terminal
7164 # S4/W31: Enables automatic LF upon receipt of CR from
7165 # remote or keyboard.
7166 # S4/W32: Enables transmission of EOT at the end of Send. If not
7167 # installed, a carriage return is sent.
7168 # S4/W33: Disables automatic carriage return in column 80.
7169 # S4/W34: Selects Page Print Mode as initial condition. If not
7170 # installed, Extension Mode is selected.
7172 # NON-STANDARD CAPABILITIES
7174 # Sending <u9> or <u7> returns a cursor position report in the format
7175 # YX\r, where Y and X are as in <cup>. This format is described in
7176 # <u8> and <u6>, but it's not clear how one should write an
7177 # appropriate scanf string, since we need to subtract %' ' from the
7178 # character after reading it. The <u9> capability is used by tack(1)
7179 # to synchronize during padding tests, and seems to work for that
7182 # This description also includes the obsolete termcap capabilities
7183 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
7185 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
7187 # The FUNCT modifier actually works with every normal key by sending
7188 # ^AX\r, where X is the sequence normally sent by that key. This is a
7189 # sort of meta key not currently describable in terminfo.
7191 # There are quite a few other keys (especially on the 920 models,) but
7192 # they are for the most part only useful in block mode.
7194 # These terminals have lots of forms manipulation features, mainly
7195 # useful in block mode, including "clear X to nulls" (vs. "clear X to
7196 # spaces"; nulls are sentinels for "send X" operations); "send X"
7197 # operations for uploading all or part of the screen; and block-mode
7198 # editing keys (they don't send escape sequences, but manipulate video
7199 # memory directly). Block mode is used for local editing, and protect
7200 # mode (in conjunction with the "write protect" attribute,
7201 # a.k.a. half-intensity outside of protect mode) is used to control
7202 # which parts of the screen are edited/sent/printed (by <mc0>).
7204 # There are at least two major families of ROM, "early" and
7205 # A49B1/A49C1; the major difference seems to be that the latter ROMs
7206 # support a few extra escape sequences for manipulating the off-screen
7207 # memory page, and for sending whole pages back to the host (mainly
7208 # useful in block mode.) The descriptions in this file don't use any
7209 # of those sequences: set cursor position including page (\E-PYX,
7210 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
7211 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
7212 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
7213 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
7214 # are as in <cup>, and some "send page" features mainly useful for
7215 # forms manipulation.
7217 # The keyboard enable (\E") and disable (\E#) sequences are unused,
7218 # except that a terminal reset (<is2>) enables the keyboard.
7220 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
7221 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
7225 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
7226 # sequences (I infer that in some TeleVideo terminal they may invert
7227 # and uninvert the display) so the <flash> sequence given here is a
7228 # cheesy page-flip instead.
7230 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
7231 # tack(1), so it is not included in the descriptions below.
7233 # It's not clear whether auto_left_margin (<bw>) flag should be set
7234 # for these terminals; tack says yes, so it is set here, but this
7235 # differs from other descriptions I've seen.
7237 # Extension print mode (<mc5>) echoes all characters to the printer
7238 # port [in addition to displaying them] except for the page print mode
7239 # sequence (<mc4>); this is a slight violation of the terminfo
7240 # definition for <mc5> but I don't expect it to cause problems. We
7241 # reset to page print mode in <rs1> since it may have been enabled
7244 # The descriptions with plus signs (+) are building blocks.
7246 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
7248 cols#80, it#8, lines#24,
7249 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7250 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
7251 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
7252 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
7253 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
7254 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
7255 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
7256 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
7257 u7=\E?, u8=%c%c\r, u9=\E?,
7259 # This isn't included in the basic capabilities because it is
7260 # typically unusable in combination with the full range of video
7261 # attributes, since the magic cookie attributes turn into ASCII
7262 # control characters, and the half-intensity ("protected") attribute
7263 # converts all affected characters to spaces.
7265 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
7268 # This uses half-intensity mode (<dim>) for standout (<smso>), and
7269 # exposes no other attributes (half-intensity is the only attribute
7270 # that does not generate a magic cookie.)
7272 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
7274 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
7277 # Full magic-cookie attribute support, with half-intensity reverse
7278 # video for standout. Note that we add a space in the <dim> sequence
7279 # to give a consistent magic-cookie count. Also note that <sgr> uses
7280 # backspacing (in the TVI-supported order) to apply all requested
7281 # attributes with only a single magic cookie.
7283 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
7285 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
7287 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
7288 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
7290 # This uses the second page memory option to save & restore screen
7291 # contents. If your terminal is missing the option, this description
7292 # should still work, but that has not been tested.
7294 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
7295 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
7296 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
7298 # This simulates flashing by briefly toggling to the other page
7301 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
7302 bel=\EK$<100>\EK, use=tvi912b+2p,
7304 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
7306 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
7307 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
7308 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
7309 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
7310 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7311 kf8=^AG\r, kf9=^AH\r,
7313 # Combinations of the basic building blocks
7315 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
7316 use=tvi912b+2p, use=tvi912b-unk,
7318 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
7319 use=tvi912b+vb, use=tvi912b-unk,
7321 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
7322 use=tvi912b+printer, use=tvi912b-unk,
7324 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
7325 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
7327 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
7328 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
7330 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
7331 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
7333 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
7334 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
7336 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
7337 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
7339 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
7340 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
7342 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
7343 use=tvi912b+dim, use=tvi912b-unk,
7345 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
7346 use=tvi912b+mc, use=tvi912b-unk,
7348 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
7349 use=tvi920b+fn, use=tvi912b-unk,
7351 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
7352 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
7354 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
7355 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
7357 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
7358 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
7360 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
7361 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
7364 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
7365 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
7368 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
7369 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
7372 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
7373 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
7376 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
7377 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
7380 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
7381 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
7384 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
7385 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
7387 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
7388 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
7390 # Televideo 921 and variants
7391 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
7392 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
7393 # also added empty <acsc> to suppress tic warning -- esr)
7394 tvi921|televideo model 921 with sysline same as page & real vi function,
7395 OTbs, OTpt, am, hs, xenl, xhp,
7396 cols#80, lines#24, xmc#0,
7397 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7398 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7399 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7400 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
7401 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
7402 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
7403 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
7404 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
7405 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
7406 # without the beeper
7407 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
7408 # also added empty <acsc> to suppress tic warning -- esr)
7409 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
7411 cols#80, lines#24, xmc#0,
7412 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7413 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
7414 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
7415 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
7416 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7417 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
7418 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
7419 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
7420 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
7421 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
7422 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
7423 dl1=\ER$<2*/>, il1=\EE$<2*/>,
7424 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
7425 kil1=\EE$<2*/>, use=tvi92B,
7427 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
7428 # in from a BSD termcap file because it looks like they do something the
7429 # old ones skip -- esr)
7430 tvi924|televideo tvi924,
7431 am, bw, hs, in, mir, msgr, xenl, xon,
7432 cols#80, it#8, lines#24, wsl#80, xmc#0,
7433 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
7434 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
7435 cub1=^H, cud1=^V, cuf1=^L,
7436 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
7437 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
7438 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
7439 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
7440 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
7441 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7442 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
7443 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
7444 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
7445 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
7446 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
7447 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
7448 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
7451 # TVI925 DIP switches. In each of these, D = Down and U = Up,
7453 # Here are the settings for the external (baud) switches (S1):
7456 # 7 8 9 10 [Printer]
7457 # 1 2 3 4 [Main RS232]
7458 # -----------------------------------------------------
7477 # Settings for word length and stop-bits (S1)
7479 # Position Description
7481 # ---------------------------
7488 # S2 (external) settings
7490 # Position Up Dn Description
7491 # --------------------------------------------
7493 # X Duplex edit (transmit editing keys)
7494 # --------------------------------------------
7495 # 2 X 912/920 emulation
7497 # --------------------------------------------
7501 # --------------------------------------------
7505 # --------------------------------------------
7509 # --------------------------------------------
7513 # --------------------------------------------
7517 # --------------------------------------------
7518 # 6 X White on black display
7519 # X Black on white display
7520 # --------------------------------------------
7523 # --------------------------------------------
7526 # --------------------------------------------
7529 # --------------------------------------------
7532 # --------------------------------------------
7533 # 10 X CR/LF (Auto LF)
7536 # S3 (internal switch) settings:
7538 # Position Up Dn Description
7539 # --------------------------------------------
7542 # --------------------------------------------
7545 # --------------------------------------------
7548 # --------------------------------------------
7551 # --------------------------------------------
7554 # --------------------------------------------
7555 # 4 X Blinking block cursor
7557 # --------------------------------------------
7558 # 4 X Blinking underline cursor
7560 # --------------------------------------------
7561 # 4 X Steady block cursor
7563 # --------------------------------------------
7564 # 4 X Steady underline cursor
7566 # --------------------------------------------
7567 # 6 X Screen blanking timer (ON)
7568 # X Screen blanking timer (OFF)
7569 # --------------------------------------------
7570 # 7 X Page attributes
7572 # --------------------------------------------
7573 # 8 X DCD disconnected
7575 # --------------------------------------------
7576 # 9 X DSR disconnected
7578 # --------------------------------------------
7579 # 10 X DTR Disconnected
7581 # --------------------------------------------
7583 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
7584 tvi925|televideo 925,
7585 OTbs, am, bw, hs, ul,
7586 cols#80, lines#24, xmc#1,
7587 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
7588 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
7589 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
7590 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
7591 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
7592 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
7593 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
7594 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
7595 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
7596 tsl=\Eh\Ef, use=adm+sgr,
7597 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
7598 # to avoid "magic cookie" standout glitch:
7599 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
7601 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
7603 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
7604 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
7605 # for additional capabilities,
7606 # The following tvi descriptions from B:pjphar and virus!mike
7607 # is for all 950s. It sets the following attributes:
7608 # full duplex (\EDF) write protect off (\E()
7609 # conversation mode (\EC) graphics mode off (\E%)
7610 # white on black (\Ed) auto page flip off (\Ew)
7611 # turn off status line (\Eg) clear status line (\Ef\r)
7612 # normal video (\E0) monitor mode off (\EX or \Eu)
7613 # edit mode (\Er) load blank char to space (\Ee\040)
7614 # line edit mode (\EO) enable buffer control (^O)
7615 # protect mode off (\E\047) duplex edit keys (\El)
7616 # program unshifted send key to send line all (\E016)
7617 # program shifted send key to send line unprotected (\E004)
7618 # set the following to nulls:
7619 # field delimiter (\Ex0\200\200)
7620 # line delimiter (\Ex1\200\200)
7621 # start-protected field delimiter (\Ex2\200\200)
7622 # end-protected field delimiter (\Ex3\200\200)
7623 # set end of text delimiter to carriage return/null (\Ex4\r\200)
7625 # TVI 950 Switch Setting Reference Charts
7629 # S1 1 2 3 4 5 6 7 8 9 10
7630 # +-----------------------+-----+-----+-----------------------+
7631 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
7633 # +------+-----------------------+-----+-----+-----------------------+
7634 # | Up | See | 7 | 2 | See |
7635 # +------+-----------------------+-----+-----+-----------------------+
7636 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
7637 # +------+-----------------------+-----+-----+-----------------------+
7640 # S2 1 2 3 4 5 6 7 8 9 10
7641 # +-----+-----+-----------------+-----+-----------+-----+-----+
7642 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
7643 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7644 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
7645 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7646 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
7647 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
7651 # +-----------+-----+-----+-----+-----+-----------+
7652 # | Display | 1 | 2 | 3 | 4 | Baud |
7653 # +-----------+-----+-----+-----+-----+ |
7654 # | Printer | 7 | 8 | 9 | 10 | Rate |
7655 # +-----------+-----+-----+-----+-----+-----------+
7656 # | D | D | D | D | 9600 |
7657 # | U | D | D | D | 50 |
7658 # | D | U | D | D | 75 |
7659 # | U | U | D | D | 110 |
7660 # | D | D | U | D | 135 |
7661 # | U | D | U | D | 150 |
7662 # | D | U | U | D | 300 |
7663 # | U | U | U | D | 600 |
7664 # | D | D | D | U | 1200 |
7665 # | U | D | D | U | 1800 |
7666 # | D | U | D | U | 2400 |
7667 # | U | U | D | U | 3600 |
7668 # | D | D | U | U | 4800 |
7669 # | U | D | U | U | 7200 |
7670 # | D | U | U | U | 9600 |
7671 # | U | U | U | U | 19200 |
7672 # +-----+-----+-----+-----+-----------+
7675 # +-----+-----+-----+-----------+
7676 # | 3 | 4 | 5 | Parity |
7677 # +-----+-----+-----+-----------+
7678 # | X | X | D | None |
7679 # | D | D | U | Odd |
7680 # | D | U | U | Even |
7681 # | U | D | U | Mark |
7682 # | U | U | U | Space |
7683 # +-----+-----+-----+-----------+
7687 # +-----+-----+-----------------+
7688 # | 7 | 8 | Communication |
7689 # +-----+-----+-----------------+
7690 # | D | D | Half Duplex |
7691 # | D | U | Full Duplex |
7694 # +-----+-----+-----------------+
7696 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
7697 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
7698 # should be present and all tvi native modes use the same string for this.
7699 # Finally, note that BSD has cud1=^V. -- esr)
7700 tvi950|televideo 950,
7701 OTbs, am, hs, mir, msgr, xenl, xon,
7702 cols#80, it#8, lines#24, xmc#1,
7703 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
7704 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7705 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7706 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
7707 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
7709 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
7710 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
7711 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
7712 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
7713 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
7714 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
7715 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
7718 # is for 950 with two pages adds the following:
7719 # set 48 line page (\E\\2)
7720 # place cursor at page 0, line 24, column 1 (\E-07 )
7721 # set local (no send) edit keys (\Ek)
7723 # two page 950 adds the following:
7724 # when entering ex, set 24 line page (\E\\1)
7725 # when exiting ex, reset 48 line page (\E\\2)
7726 # place cursor at 0,24,1 (\E-07 )
7727 # set duplex (send) edit keys (\El) when entering vi
7728 # set local (no send) edit keys (\Ek) when exiting vi
7730 tvi950-2p|televideo950 w/2 pages,
7731 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
7732 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7733 smkx=\El, use=tvi950,
7735 # is for 950 with four pages adds the following:
7736 # set 96 line page (\E\\3)
7737 # place cursor at page 0, line 24, column 1 (\E-07 )
7739 # four page 950 adds the following:
7740 # when entering ex, set 24 line page (\E\\1)
7741 # when exiting ex, reset 96 line page (\E\\3)
7742 # place cursor at 0,24,1 (\E-07 )
7744 tvi950-4p|televideo950 w/4 pages,
7745 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
7746 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7747 smkx=\El, use=tvi950,
7749 # <is2> for reverse video 950 changes the following:
7750 # set reverse video (\Ed)
7752 # set vb accordingly (\Ed ...delay... \Eb)
7754 tvi950-rv|televideo950 rev video,
7755 flash=\Ed$<200/>\Eb,
7756 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
7759 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
7760 tvi950-rv-2p|televideo950 rev video w/2 pages,
7761 flash=\Ed$<200/>\Eb,
7762 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
7763 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7764 smkx=\El, use=tvi950,
7766 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
7767 tvi950-rv-4p|televideo950 rev video w/4 pages,
7768 flash=\Ed$<200/>\Eb,
7769 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
7770 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
7771 smkx=\El, use=tvi950,
7772 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
7773 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
7774 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
7775 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
7776 # the :ko: string had :cl: in it, which means that one of the original
7777 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
7778 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
7779 # ko implies -- esr)
7780 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
7782 tvi955|televideo 955,
7785 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
7786 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
7787 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
7788 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
7789 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
7790 rmam=\E[=7l, rmxon=^N,
7791 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
7792 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
7794 tvi955-w|955-w|televideo955 w/132 cols,
7796 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
7797 # use half-intensity as normal mode, full intensity as <bold>
7798 tvi955-hb|955-hb|televideo955 half-bright,
7799 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
7800 sgr0=\EG0\E[=5h, use=tvi955,
7801 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
7802 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
7803 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
7804 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
7805 # it does to the function keys. I deduced <rmam>/<smam>.
7806 # also added empty <acsc> to suppress tic warning, -- esr)
7807 tvi970|televideo 970,
7808 OTbs, OTpt, am, da, db, mir, msgr,
7809 cols#80, it#8, lines#24,
7810 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
7811 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
7812 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
7813 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
7814 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
7815 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
7816 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7817 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
7818 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
7819 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
7820 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
7821 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
7822 smul=\E[4m, vpa=\E[%i%p1%dd,
7823 tvi970-vb|televideo 970 with visual bell,
7824 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7826 tvi970-2p|televideo 970 with using 2 pages of memory,
7827 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
7829 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
7830 # per line (rather than 40), Esc K chooses the normal character set. Not sure
7831 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
7832 # <smul> strings are klutzy, but at least use no screen space.
7833 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
7834 # its absence means <smam>=\Ev isn't safe to use. -- esr)
7835 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
7836 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
7837 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
7838 tvipt|televideo personal terminal,
7841 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
7842 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
7843 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
7844 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
7845 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
7846 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
7847 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
7848 tvi9065|televideo 9065,
7849 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
7850 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
7852 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
7853 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
7854 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
7855 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
7856 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
7857 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
7858 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
7859 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
7860 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
7861 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
7863 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
7864 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
7865 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
7866 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
7867 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
7868 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
7869 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
7870 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
7871 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
7872 pfx=\E|%p1%{48}%+%c1%p2%s\031,
7873 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
7874 rep=\E[%p2%db%p1%c, rev=\EG4,
7875 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
7876 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
7877 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
7878 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
7879 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
7880 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
7881 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
7882 sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
7883 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
7884 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
7888 # In September 1993, Visual Technology of Westboro, Massachusetts,
7889 # merged with White Pine Software of Nashua, New Hampshire.
7891 # White Pine Software may be contacted at +1 603/886-9050.
7892 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
7895 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
7896 # Recently I hacked together the following termcap for Visual
7897 # Technology's Visual 50 terminal. It's a slight modification of
7899 # It's intended to run when the Visual 50 is in vt52 emulation mode
7900 # (I know what you're thinking; if it's emulating a vt52, then why
7901 # another termcap? Well, it turns out that the Visual 50 can handle
7902 # <dl1> and db(?) among other things, which the vt52 can't)
7903 # The termcap works OK for the most part. The only problem is on
7904 # character inserts. The whole line gets painfully redrawn for each
7905 # character typed. Any suggestions?
7906 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
7907 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
7908 # disguise; <kf7>-<kf9> are really l1-l3.
7910 OTbs, OTpt, am, da, db, msgr,
7911 cols#80, it#8, lines#24,
7912 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
7913 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7914 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
7915 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
7916 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
7917 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
7918 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
7919 # this one was BSD & SCO's vi50
7920 vi50adm|visual 50 in adm3a mode,
7922 cols#80, it#8, lines#24,
7923 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7924 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
7925 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
7926 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
7928 # From: Jeff Siegal <jbs@quiotix.com>
7930 OTbs, am, mir, msgr,
7931 cols#80, it#8, lines#24,
7932 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
7933 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7934 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
7935 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
7936 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
7939 # Visual 200 from BRL
7940 # The following switch settings are assumed for normal operation:
7941 # FULL_DUPLEX SCROLL CR
7942 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
7943 # Other switches may be set for operator convenience or communication
7945 # Character insertion is kludged in order to get around the "beep" misfeature.
7946 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
7947 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
7948 # and <dl1> strings, but we seem to get along fine without them.
7950 OTbs, OTpt, am, mir, msgr,
7951 OTkn#10, cols#80, it#8, lines#24,
7952 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
7953 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
7954 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
7955 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
7956 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7957 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
7958 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
7959 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
7960 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
7961 rmacs=\EG, rmkx=\E>, rmso=\E3,
7962 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
7963 smkx=\E=, smso=\E4, tbc=\Eg,
7964 # The older Visuals didn't come with function keys. This entry uses
7965 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
7966 # If your version of vi doesn't support function keys you may want
7968 vi200-f|visual 200 no function keys,
7969 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
7970 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
7971 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
7973 vi200-rv|visual 200 reverse video,
7974 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
7976 # the function keys are programmable but we don't reprogram them to their
7977 # default values with <is2> because programming them is very verbose. maybe
7978 # an initialization file should be made for the 300 and they could be stuck
7980 # (vi300: added <rmam>/<smam> based on init string -- esr)
7981 vi300|visual 300 ansi x3.64,
7984 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
7985 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7986 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7988 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
7989 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7990 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
7991 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
7992 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
7993 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
7994 smso=\E[1m, smul=\E[4m,
7995 # some of the vi300s have older firmware that has the command
7996 # sequence for setting editing extent reversed.
7997 vi300-old|visual 300 with old firmware (set edit extent reversed),
7998 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
8001 # Visual 500 prototype entry from University of Wisconsin.
8002 # The best place to look for the escape sequences is page A1-1 of the
8003 # Visual 500 manual. The initialization sequence given here may be
8004 # overkill, but it does leave out some of the initializations which can
8005 # be done with the menus in set-up mode.
8006 # The :xp: line below is so that emacs can understand the padding requirements
8007 # of this slow terminal. :xp: is 10 time the padding factor.
8008 # (vi500: removed unknown :xp#4: termcap;
8009 # also added empty <acsc> to suppress tic warning -- esr)
8012 cols#80, it#8, lines#33,
8013 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
8014 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
8015 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
8016 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
8017 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
8019 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
8020 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8021 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
8022 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
8024 # The visual 550 is a visual 300 with tektronix graphics,
8025 # and with 33 lines. clear screen is modified here to
8026 # also clear the graphics.
8027 vi550|visual 550 ansi x3.64,
8029 clear=\030\E[H\E[2J, use=vi300,
8031 vi603|visual603|visual 603,
8033 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
8034 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
8035 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8036 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
8037 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
8038 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
8039 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
8045 # 3471 North First Street
8046 # San Jose, CA 95134
8047 # Vox: (408)-473-1200
8048 # Fax: (408) 473-1222
8049 # Web: http://www.wyse.com
8051 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
8052 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
8053 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
8054 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
8056 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
8057 # They now own the Qume and Amdek brands, too. So these are the people to
8058 # talk with about all Link, Qume, and Amdek terminals.
8060 # These entries include a few small fixes.
8061 # I canceled the bel capacities in the vb entries.
8062 # I made two trivial syntax fixes in the wyse30 entry.
8063 # I made some entries relative to adm+sgr.
8066 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
8068 # Although the Wyse 30 can support more than one attribute
8069 # it requires magic cookies to do so. Many applications do not
8070 # function well with magic cookies. The following terminfo uses
8071 # the protect mode to support one attribute (dim) without cookies.
8072 # If more than one attribute is needed then the wy30-mc terminfo
8075 wy30|wyse30|Wyse 30,
8076 am, bw, hs, mc5i, mir, msgr, xon,
8077 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8078 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8079 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
8080 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8081 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
8082 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
8083 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
8084 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
8085 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
8086 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
8087 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8088 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
8089 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
8090 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
8091 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
8092 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8093 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8094 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8095 smso=\E`7\E), tbc=\E0, tsl=\EF,
8097 # This terminal description uses the non-hidden attribute mode
8098 # (with magic cookie).
8100 # (wy30-mc: added <smcup> to suppress tic warning --esr)
8101 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
8104 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
8105 rmcup=\EG0, rmso=\EG0,
8106 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8107 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8108 smso=\EG4, use=wy30, use=adm+sgr,
8109 # The mandatory pause used by <flash> does not work with
8110 # older versions of terminfo. If you see this effect then
8111 # unset xon and delete the / from the delay.
8112 # i.e. change $<100/> to $<100>
8113 wy30-vb|wyse30-vb|wyse 30 visible bell,
8116 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
8117 # Normal) without magic cookies by using the protect mode.
8118 # The following description uses this feature, but when more
8119 # than one attribute is put on the screen at once, all attributes
8120 # will be changed to be the same as the last attribute given.
8121 # The Wyse 50 can support more attributes when used with magic
8122 # cookies. The wy50-mc terminal description uses magic cookies
8123 # to correctly handle multiple attributes on a screen.
8125 wy50|wyse50|Wyse 50,
8126 am, bw, hs, mc5i, mir, msgr, xon,
8127 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
8128 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
8129 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
8130 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8131 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
8132 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8133 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
8134 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
8135 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
8136 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8137 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8138 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8139 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8140 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8141 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
8142 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8143 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
8144 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
8145 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8146 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
8147 smso=\E`6\E), tbc=\E0, tsl=\EF,
8149 # This terminal description uses the non-hidden attribute mode
8150 # (with magic cookie).
8152 # The mandatory pause used by flash does not work with some
8153 # older versions of terminfo. If you see this effect then
8154 # unset <xon> and delete the / from the delay.
8155 # i.e. change $<100/> to $<100>
8156 # (wy50-mc: added <smcup> to suppress tic warning --esr)
8157 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
8160 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
8161 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
8162 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8163 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
8164 smso=\EGt, use=wy50, use=adm+sgr,
8165 wy50-vb|wyse50-vb|wyse 50 visible bell,
8167 wy50-w|wyse50-w|wyse 50 132-column,
8168 cols#132, lw#7, nlab#16, wsl#97,
8169 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8171 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
8175 # The Wyse 350 is a Wyse 50 with color.
8176 # Unfortunately this means that it has magic cookies.
8177 # The color attributes are designed to overlap the reverse, dim and
8178 # underline attributes. This is nice for monochrome applications
8179 # because you can make underline stuff green (or any other color)
8180 # but for true color applications it's not so hot because you cannot
8181 # mix color with reverse, dim or underline.
8182 # To further complicate things one of the attributes must be
8183 # black (either the foreground or the background). In reverse video
8184 # the background changes color with black letters. In normal video
8185 # the foreground changes colors on a black background.
8186 # This terminfo uses some of the more advanced features of curses
8187 # to display both color and blink. In the final analysis I am not
8188 # sure that the wy350 runs better with this terminfo than it does
8189 # with the wy50 terminfo (with user adjusted colors).
8191 # The mandatory pause used by flash does not work with
8192 # older versions of terminfo. If you see this effect then
8193 # unset xon and delete the / from the delay.
8194 # i.e. change $<100/> to $<100>
8196 # Bug: The <op> capability resets attributes.
8197 wy350|wyse350|Wyse 350,
8198 am, bw, hs, mc5i, mir, xon,
8199 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
8201 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
8202 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
8203 cub1=^H, cud1=^J, cuf1=^L,
8204 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
8205 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
8206 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8207 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
8208 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
8209 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
8210 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
8211 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
8212 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8213 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8214 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
8215 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
8216 pfx=\Ez%p1%{63}%+%c%p2%s\177,
8217 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
8218 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
8219 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
8220 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
8221 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
8222 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
8223 wy350-vb|wyse350-vb|wyse 350 visible bell,
8225 wy350-w|wyse350-w|wyse 350 132-column,
8226 cols#132, lw#7, nlab#16, wsl#97,
8227 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
8229 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
8232 # This terminfo description is untested.
8233 # The wyse100 emulates an adm31, so the adm31 entry should work.
8237 cols#80, lines#24, xmc#1,
8238 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8239 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8240 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
8241 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8242 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
8243 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
8244 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
8246 # The Wyse 120/150 has most of the features of the Wyse 60.
8247 # This terminal does not need padding up to 9600 baud!
8248 # <msgr> should be set but the clear screen fails when in
8249 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8252 wy120|wyse120|wy150|wyse150|Wyse 120/150,
8253 am, bw, hs, km, mc5i, mir, msgr, xon,
8254 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8255 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8256 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8257 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8258 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8259 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8260 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
8261 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8262 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8263 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8264 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8265 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8266 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8267 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8268 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8269 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8270 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8271 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8272 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8273 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8274 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
8275 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8277 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8278 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8279 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8280 tbc=\E0, tsl=\EF, use=adm+sgr,
8282 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
8283 cols#132, lw#7, nlab#16, wsl#97,
8284 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8285 rs2=\E`;$<70>, use=wy120,
8287 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
8288 lh@, lines#25, lw@, nlab@,
8289 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
8291 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
8292 lh@, lines#25, lw@, nlab@,
8293 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
8295 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
8298 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
8301 # The Wyse 60 is like the Wyse 50 but with more padding.
8302 # The reset strings are slow and the pad times very depending
8303 # on other parameters such as font loading. I have tried
8304 # to follow the following outline:
8306 # <rs1> -> set personality
8307 # <rs2> -> set number of columns
8308 # <rs3> -> set number of lines
8309 # <is1> -> select the proper font
8310 # <is2> -> do the initialization
8311 # <is3> -> set up display memory (2 pages)
8313 # The Wyse 60's that have vt100 emulation are slower than the
8314 # older Wyse 60's. This change happened mid-1987.
8315 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
8317 # The meta key is only half right. This terminal will return the
8318 # high order bit set when you hit CTRL-function_key
8320 # It may be useful to assign two function keys with the
8321 # values \E=(\s look at old data in page 1
8322 # \E=W, look at bottom of page 1
8323 # where \s is a space ( ).
8326 # The Wyse 60 runs faster when the XON/XOFF
8327 # handshake is turned off.
8329 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
8330 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8331 wy60|wyse60|Wyse 60,
8332 am, bw, hs, km, mc5i, mir, msgr,
8333 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
8334 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8335 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
8336 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8337 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8338 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
8339 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
8340 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
8341 ip=$<3>, is1=\EcB0\EcC1,
8342 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8343 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8344 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8345 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8346 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8347 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8348 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8349 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8350 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
8351 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8352 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8353 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
8354 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
8355 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
8356 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
8357 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8358 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8359 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8360 tbc=\E0, tsl=\EF, use=adm+sgr,
8362 wy60-w|wyse60-w|wyse 60 132-column,
8363 cols#132, lw#7, nlab#16, wsl#97,
8364 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
8365 rs2=\EeF$<150>\E`;$<150>, use=wy60,
8367 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
8368 lh@, lines#25, lw@, nlab@,
8369 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
8370 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
8371 lh@, lines#25, lw@, nlab@,
8372 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
8374 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
8376 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
8377 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
8378 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
8379 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
8380 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
8381 cols#132, lw#7, nlab#16, wsl#97,
8382 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8383 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
8384 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
8386 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
8387 lh@, lines#43, lw@, nlab@,
8388 pln@, rs3=\Ee+$<150>, use=wy60-42,
8389 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
8390 lh@, lines#43, lw@, nlab@,
8391 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
8393 wy60-vb|wyse60-vb|Wyse 60 visible bell,
8395 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
8398 # The Wyse-99GT looks at lot like the Wyse 60 except that it
8399 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
8400 # setup parameter controls the number of lines on the screen.
8401 # For the Wyse 99GT the "lines" setup parameter controls the
8402 # number of lines in a page. The screen can display 25 lines max.
8403 # The Wyse-99GT also has personalities for the VT220 and
8404 # Tektronix 4014. But this has no bearing on the native mode.
8406 # (msgr) should be set but the clear screen fails when in
8407 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
8408 # then set msgr, else use msgr@.
8410 # u0 -> enter Tektronix mode
8411 # u1 -> exit Tektronix mode
8413 wy99gt|wyse99gt|Wyse 99gt,
8415 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
8416 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
8417 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
8418 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
8419 u0=\E~>\E8, u1=\E[42h, use=wy60,
8421 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
8422 cols#132, lw#7, nlab#16, wsl#97,
8423 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
8424 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
8427 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
8428 lh@, lines#25, lw@, nlab@,
8429 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
8431 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
8432 lh@, lines#25, lw@, nlab@,
8433 pln@, rs2=\E`;$<150>, use=wy99gt-w,
8435 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
8438 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
8441 # Can't set tabs! Other bugs (ANSI mode only):
8442 # - can't redefine function keys (anyway, key redefinition in ANSI mode
8443 # is too much complex to be described);
8444 # - meta key can't be described (the terminal forgets it when reset);
8445 # The xon-xoff handshaking can't be disabled while in ansi personality, so
8446 # emacs can't work at speed greater than 9600 baud. No padding is needed at
8448 # dch1 has been commented out because it causes annoying glittering when
8449 # vi deletes one character at the beginning of a line with tabs in it.
8450 # dch makes sysgen(1M) have a horrible behaviour when deleting
8451 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
8452 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
8453 # not, so smir and rmir are commented out as well.
8454 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8455 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
8456 am, km, mc5i, mir, msgr, xenl,
8457 cols#80, it#8, lines#25, vt#3,
8458 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
8459 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8460 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
8461 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
8462 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
8463 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
8464 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
8465 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
8466 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
8467 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
8468 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
8469 il1=\E[L, ind=\n$<1>, invis=\E[8m,
8470 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
8471 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8472 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
8473 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
8474 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
8475 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
8476 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
8477 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
8478 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8479 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
8480 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
8482 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
8483 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
8484 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
8486 # This is the american terminal. Here tabs work fine.
8487 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8488 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
8489 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
8491 # This terminal (firmware version 02) has a lot of bugs:
8493 # - other bugs in ANSI modes (see above).
8494 # This description disables handshaking when using cup. This is because
8495 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
8496 # cannot be used at speeds greater than 9600 baud, because at greater
8497 # speeds handshaking is needed even for character sending. If you use
8498 # DTR handshaking, you can use even greater speeds.
8499 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8500 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
8501 am, bw, hs, km, mc5i, mir, msgr, xon,
8502 cols#80, it#8, lines#25, wsl#46,
8503 acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
8504 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
8505 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
8506 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8507 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
8508 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
8509 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
8511 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
8512 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
8513 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
8514 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
8515 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
8516 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
8517 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8518 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
8519 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
8520 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
8521 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
8522 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
8523 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
8524 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
8526 # This is the american terminal. Here tabs work.
8527 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
8528 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
8529 hts=\E1, tbc=\E0, use=wy99f,
8532 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
8533 # The reset strings are slow and the pad times very depending
8534 # on other parameters such as font loading. I have tried
8535 # to follow the following outline:
8537 # <rs1> -> set personality
8538 # <rs2> -> set number of columns
8539 # <rs3> -> set number of lines
8540 # <is1> -> select the proper font
8541 # <is2> -> do the initialization
8542 # <is3> -> set up display memory (2 pages)
8544 # The display memory may be used for either text or graphics.
8545 # When "Display Memory = Shared" the terminal will have more pages
8546 # but garbage may be left on the screen when you switch from
8547 # graphics to text. If "Display Memory = Unshared" then the
8548 # text area will be only one page long.
8550 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
8551 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
8552 wy160|wyse160|Wyse 160,
8553 am, bw, hs, km, mc5i, mir, msgr,
8554 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
8555 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8556 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
8557 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8558 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
8559 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
8560 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
8561 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
8562 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8563 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8564 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8565 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8566 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8567 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8568 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
8569 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
8570 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
8571 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8572 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8573 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
8574 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
8575 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
8576 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
8577 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8578 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8579 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
8580 tbc=\E0, tsl=\EF, use=adm+sgr,
8582 wy160-w|wyse160-w|wyse 160 132-column,
8583 cols#132, lw#7, nlab#16, wsl#90,
8584 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
8585 rs2=\EeF$<150>\E`;$<150>, use=wy160,
8587 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
8588 lh@, lines#25, lw@, nlab@,
8589 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
8590 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
8591 lh@, lines#25, lw@, nlab@,
8592 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
8594 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
8596 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
8597 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
8598 rs3=\Ee*$<150>, use=wy160,
8599 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
8600 cols#132, lw#7, nlab#16, wsl#90,
8601 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
8602 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
8604 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
8605 lh@, lines#43, lw@, nlab@,
8606 pln@, rs3=\Ee+$<150>, use=wy160-42,
8607 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
8608 lh@, lines#43, lw@, nlab@,
8609 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
8611 wy160-vb|wyse160-vb|Wyse 160 visible bell,
8613 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
8616 # The Wyse 75 is a vt100 lookalike without advanced video.
8618 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
8619 # Underline) without magic cookies. The following description
8620 # uses this capability, but when more than one attribute is
8621 # put on the screen at once, all attributes will be changed
8622 # to be the same as the last attribute given.
8623 # The Wyse 75 can support more attributes when used with magic
8624 # cookies. The wy75-mc terminal description uses magic cookies
8625 # to correctly handle multiple attributes on a screen.
8627 wy75|wyse75|wyse 75,
8628 am, hs, mc5i, mir, msgr, xenl, xon,
8629 cols#80, lines#24, ma#1, pb#1201, wsl#78,
8630 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8631 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
8632 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
8633 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8634 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8635 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
8636 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
8637 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
8638 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
8639 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
8640 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
8641 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8642 ind=\n$<2>, ip=$<1>,
8643 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
8644 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
8645 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
8646 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
8647 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
8648 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
8649 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
8650 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
8651 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
8652 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
8653 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
8654 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
8655 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
8657 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
8658 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8659 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
8660 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
8662 # This terminal description uses the non-hidden attribute mode
8663 # (with magic cookie).
8665 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
8668 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
8669 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
8670 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
8671 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
8673 wy75-vb|wyse75-vb|wyse 75 with visible bell,
8676 wy75-w|wyse75-w|wyse 75 in 132 column mode,
8678 rs2=\E[35h\E[?3h$<80>, use=wy75,
8679 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
8683 # Wyse 85 emulating a vt220 7 bit mode.
8684 # 24 line screen with status line.
8686 # The vt220 mode permits more function keys but it wipes out
8687 # the escape key. I strongly recommend that <f11> be set to
8689 # The terminal may have to be set for 8 data bits and 2 stop
8690 # bits for the arrow keys to work.
8691 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
8692 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
8693 # <dch> leave trash on the screen when used without XON/XOFF.
8695 wy85|wyse85|wyse 85,
8696 am, hs, mc5i, mir, msgr, xenl, xon,
8697 cols#80, it#8, lines#24, wsl#80,
8698 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8699 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8700 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8701 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8702 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8703 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8704 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8705 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8706 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8707 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8708 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8709 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8710 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8711 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8712 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8713 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
8714 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
8715 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
8716 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
8717 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
8718 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
8719 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8720 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8721 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8722 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8724 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8725 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8726 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8727 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
8729 # Wyse 85 with visual bell.
8730 wy85-vb|wyse85-vb|wyse 85 with visible bell,
8731 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
8733 # Wyse 85 in 132-column mode.
8734 wy85-w|wyse85-w|wyse 85 in 132-column mode,
8736 rs2=\E[35h\E[?3h$<70>, use=wy85,
8738 # Wyse 85 in 132-column mode with visual bell.
8739 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
8742 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
8743 # This copes with an apparent firmware bug in the wy85. He writes:
8744 # "What I did was change leave the terminal cursor keys set to Normal
8745 # (instead of application), and change \E[ to \233 for all the keys in
8746 # terminfo. At one point, I found some reference indicating that this
8747 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
8748 # me), but I can't find that and the server under my bookmark to "Wyse
8749 # Technical" isn't responding. So there's the question of wether the wy85
8750 # terminfo should reflect the manufactuer's intended behaviour of the terminal
8752 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
8753 am, hs, mc5i, mir, msgr, xenl, xon,
8754 cols#80, it#8, lines#24, wsl#80,
8755 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8756 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8757 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
8758 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8759 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8760 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8761 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
8762 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
8763 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
8764 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
8765 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
8766 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
8767 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
8768 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
8769 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
8770 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
8771 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
8772 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
8773 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
8774 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
8775 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
8776 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
8777 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
8778 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
8779 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
8780 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
8781 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
8783 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
8784 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8785 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
8786 tsl=\E[40h\E7\E[25;%i%p1%dH,
8788 # Wyse 185 emulating a vt320 7 bit mode.
8790 # This terminal always displays 25 lines. These lines may be used
8791 # as 24 data lines and a terminal status line (top or bottom) or
8792 # 25 data lines. The 48 and 50 line modes change the page size
8793 # and not the number of lines on the screen.
8795 # The Compose Character key can be used as a meta key if changed
8798 wy185|wyse185|wyse 185,
8799 am, hs, km, mc5i, mir, msgr, xenl, xon,
8800 cols#80, it#8, lines#24, wsl#80,
8801 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8802 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8803 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8804 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
8805 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8806 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8807 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
8808 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8809 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
8810 el=\E[K, el1=\E[1K, enacs=\E)0,
8811 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
8812 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
8813 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
8814 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
8815 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
8816 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
8817 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
8818 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
8819 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
8820 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
8821 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
8822 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
8823 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
8824 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
8825 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
8826 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
8827 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
8828 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
8829 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8830 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
8831 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
8832 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
8835 # Wyse 185 with 24 data lines and top status (terminal status)
8836 wy185-24|wyse185-24|wyse 185 with 24 data lines,
8838 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
8841 # Wyse 185 with visual bell.
8842 wy185-vb|wyse185-vb|wyse 185+flash,
8845 # Wyse 185 in 132-column mode.
8846 wy185-w|wyse185-w|wyse 185 in 132-column mode,
8848 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
8849 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
8851 # Wyse 185 in 132-column mode with visual bell.
8852 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
8855 # wy325 terminfo entries
8856 # Done by Joe H. Davis 3-9-92
8858 # lines 25 columns 80
8860 wy325|wyse325|Wyse epc,
8861 am, bw, hs, mc5i, mir,
8862 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
8863 acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
8864 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
8865 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8866 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
8867 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
8868 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
8869 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
8870 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
8871 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
8872 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8873 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
8874 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
8875 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8876 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
8877 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
8878 mc0=\EP, mc4=^T, mc5=\Ed#,
8879 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
8880 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
8881 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
8882 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
8883 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
8885 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
8886 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
8887 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
8888 tsl=\EF, use=adm+sgr,
8891 # lines 24 columns 80 vb
8893 wy325-vb|wyse325-vb|wyse-325 with visual bell,
8897 # lines 24 columns 132
8899 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
8900 cols#132, lw#7, nlab#16, wsl#97,
8901 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
8902 rs2=\E`;$<70>, use=wy325,
8904 # lines 25 columns 80
8906 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
8907 lh@, lines#25, lw@, nlab@,
8908 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
8910 # lines 25 columns 132
8912 wy325-25w|wyse325-25w|wy325 132 columns,
8913 lh@, lines#25, lw@, nlab@,
8914 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8916 # lines 25 columns 132 vb
8918 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
8922 # lines 42 columns 80
8924 wy325-42|wyse325-42|wyse-325 42 lines,
8925 lh@, lines#42, lw@, nlab@,
8926 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
8928 # lines 42 columns 132
8930 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
8931 lh@, lines#42, lw@, nlab@,
8932 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8934 # lines 42 columns 132 vb
8936 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
8939 # lines 43 columns 80
8941 wy325-43|wyse325-43|wyse-325 43 lines,
8942 lh@, lines#43, lw@, nlab@,
8945 # lines 43 columns 132
8947 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
8948 lh@, lines#43, lw@, nlab@,
8949 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
8951 # lines 43 columns 132 vb
8953 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
8956 # Wyse 370 -- 24 line screen with status line.
8958 # The terminal may have to be set for 8 data bits and 2 stop
8959 # bits for the arrow keys to work.
8961 # If you change keyboards the terminal will send different
8963 # The following definition is for the basic terminal without
8966 # <u0> -> enter Tektronix 4010/4014 mode
8967 # <u1> -> exit Tektronix 4010/4014 mode
8968 # <u2> -> enter ASCII mode (from any ANSI mode)
8969 # <u3> -> exit ASCII mode (goto native ANSI mode)
8970 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
8971 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
8973 # Bug: The <op> capability resets attributes.
8974 wy370-nk|wyse 370 without function keys,
8975 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
8976 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
8977 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8978 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8979 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
8980 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8981 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
8982 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
8983 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
8984 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
8985 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
8986 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
8987 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
8988 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
8989 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
8991 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
8992 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
8993 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
8994 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
8996 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
8997 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
8998 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
8999 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
9000 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
9001 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
9002 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9003 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
9004 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
9005 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
9006 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
9007 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
9009 # Function key set for the ASCII (wy-50 compatible) keyboard
9010 # This is the default 370.
9012 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
9013 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9014 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
9015 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
9016 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
9017 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
9018 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
9019 knp=\E[U, kpp=\E[V, use=wy370-nk,
9021 # Function key set for the VT-320 (and wy85) compatible keyboard
9023 wy370-105k|Wyse 370 with 105 key keyboard,
9024 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9025 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
9026 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
9027 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
9028 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
9029 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
9030 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
9031 use=wy370-nk, use=vt220+keypad,
9033 # Function key set for the PC compatible keyboard
9035 wy370-EPC|Wyse 370 with 102 key keyboard,
9036 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9037 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
9038 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9039 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
9040 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
9042 # Wyse 370 with visual bell.
9043 wy370-vb|Wyse 370 with visible bell,
9046 # Wyse 370 in 132-column mode.
9047 wy370-w|Wyse 370 in 132-column mode,
9049 rs2=\E[35h\E[?3h$<70>, use=wy370,
9051 # Wyse 370 in 132-column mode with visual bell.
9052 wy370-wvb|Wyse 370 with visible bell 132-columns,
9053 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
9054 wy370-rv|Wyse 370 reverse video,
9055 rs3=\E[32h\E[?5h, use=wy370,
9057 # Wyse 99gt Tektronix 4010/4014 emulator,
9059 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
9062 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9063 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9065 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9067 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9068 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
9070 # Wyse 160 Tektronix 4010/4014 emulator,
9072 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
9073 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
9074 home=^]8`g @\037, use=wy99gt-tek,
9076 # Wyse 370 Tektronix 4010/4014 emulator,
9078 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
9081 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
9082 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
9084 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
9086 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
9087 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
9088 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
9090 # Vendor-supplied Wyse entries end here.
9093 #TITLE: TERMINFO ENTRY WY520
9095 # The WY520 terminfo is based on the WY285 entry published on the WYSE
9096 # BBS with the addition of more function keys and special keys.
9098 # rs1 -> set personality
9099 # rs2 -> set number of columns
9100 # rs3 -> set number of lines
9101 # is1 -> select the proper font
9102 # is2 -> do the initialization
9103 # is3 -> If this string is empty then rs3 gets sent.
9105 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
9106 # - The BS key is programmed to generate BS in smcup since
9107 # is2 doesn't seem to work.
9108 # - Remove and shift/Remove: delete a character
9109 # - Insert : enter insert mode
9110 # - Find : delete to end of file
9111 # - Select : clear a line
9112 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
9114 # - Bottom status line (host writable line) is used.
9115 # - smkx,rmkx are removed because this would put the numeric
9116 # keypad in Dec application mode which doesn't seem to work
9117 # with SCO applications.
9119 wy520|wyse520|wyse 520,
9120 am, hs, km, mc5i, mir, xenl, xon,
9121 cols#80, it#8, lines#24, wsl#80,
9122 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9123 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9124 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
9125 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
9126 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9127 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9128 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
9129 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
9130 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
9131 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
9132 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
9133 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
9134 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
9135 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
9136 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
9137 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
9138 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
9139 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
9140 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
9141 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
9142 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
9143 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9144 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
9145 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
9146 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
9147 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
9148 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9149 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
9150 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
9151 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
9152 vpa=\E[%i%p1%dd, use=vt220+keypad,
9154 # Wyse 520 with 24 data lines and status (terminal status)
9155 wy520-24|wyse520-24|wyse 520 with 24 data lines,
9157 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9160 # Wyse 520 with visual bell.
9161 wy520-vb|wyse520-vb|wyse 520 with visible bell,
9162 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
9164 # Wyse 520 in 132-column mode.
9165 wy520-w|wyse520-w|wyse 520 in 132-column mode,
9167 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9168 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
9170 # Wyse 520 in 132-column mode with visual bell.
9171 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
9172 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
9175 # Wyse 520 emulating a vt420 7 bit mode.
9176 # The DEL key is programmed to generate BS in is2.
9177 # With EPC keyboard.
9178 # - 'End' key will clear till end of line on EPC keyboard
9179 # - Shift/End : ignored.
9180 # - Insert : enter insert mode.
9181 # - Delete : delete a character (have to change interrupt character
9182 # to CTRL-C: stty intr '^c') for it to work since the
9183 # Delete key sends 7FH.
9184 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
9185 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
9186 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
9189 # Wyse 520 with 24 data lines and status (terminal status)
9190 # with EPC keyboard.
9191 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
9193 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
9196 # Wyse 520 with visual bell.
9197 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
9198 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
9200 # Wyse 520 in 132-column mode.
9201 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
9203 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
9204 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
9206 # Wyse 520 in 132-column mode with visual bell.
9207 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
9208 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
9210 # Wyse 520 in 80-column, 36 lines
9211 wy520-36|wyse520-36|wyse 520 with 36 data lines,
9214 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9217 # Wyse 520 in 80-column, 48 lines
9218 wy520-48|wyse520-48|wyse 520 with 48 data lines,
9221 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9224 # Wyse 520 in 132-column, 36 lines
9225 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
9228 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9231 # Wyse 520 in 132-column, 48 lines
9232 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
9235 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9239 # Wyse 520 in 80-column, 36 lines with EPC keyboard
9240 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
9243 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
9246 # Wyse 520 in 80-column, 48 lines with EPC keyboard
9247 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
9250 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
9253 # Wyse 520 in 132-column, 36 lines with EPC keyboard
9254 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
9257 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
9260 # Wyse 520 in 132-column, 48 lines with EPC keyboard
9261 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
9264 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
9267 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
9268 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
9269 # file and we don't know what <hts> is -- esr)
9270 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
9272 cols#80, it#8, lines#24,
9273 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
9274 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
9275 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
9276 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
9277 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
9278 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
9281 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
9282 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
9283 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9284 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
9287 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
9288 wy100q|Wyse 100 for Quotron,
9290 cols#80, lines#24, xmc#1,
9291 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
9292 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9293 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
9294 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
9295 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
9297 #### Kermit terminal emulations
9299 # Obsolete Kermit versions may be listed in the section describing obsolete
9300 # non-ANSI terminal emulators later in the file.
9303 # KERMIT standard all versions.
9304 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9305 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9306 # From: greg small <gts@populi.berkeley.edu> 9-25-84
9307 kermit|standard kermit,
9310 clear=\EE, cub1=^H, cuf1=\EC,
9311 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
9312 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
9313 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
9314 kermit-am|standard kermit plus auto-margin,
9316 is2=K1 Standard Kermit plus Automatic Margins\n,
9319 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
9320 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
9322 # From: greg small <gts@populi.berkeley.edu> 8-30-84
9323 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
9326 clear=\EH\EJ, ed@, el@,
9327 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
9329 # Cannot use line 25, now acts funny like ansi special scrolling region.
9330 # Initialization must escape from that region by cursor position to line 24.
9331 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
9332 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
9333 # From: greg small <gts@populi.berkeley.edu> 12-19-84
9334 pckermit120|UCB IBMPC Kermit 1.20,
9336 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
9338 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
9339 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
9340 # MS-DOS Kermit 2.27 for the IBMPC
9341 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
9342 # Cannot use line 25, now acts funny like ansi special scrolling region.
9343 # Initialization must escape from that region by cursor position to line 24.
9344 # Does not use am: because autowrap is lost when kermit dropped and restarted.
9345 # Reverse video for standout like H19.
9346 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
9347 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9348 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
9350 cols#80, it#8, lines#24,
9351 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
9352 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9353 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
9354 home=\EH, ht=^I, il1=\EL,
9355 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
9356 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
9357 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
9358 # MS-DOS Kermit 2.27 with automatic margins
9359 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9360 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
9362 cvvis=\EO\Eq\EG\EvK5,
9363 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
9365 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
9366 # Automatic margins now default. Use ansi <sgr> for highlights.
9367 # Define function keys.
9368 # (msk22714: removed obsolete ":kn#10:" -- esr)
9369 # From: greg small <gts@populi.berkeley.edu> 3-17-85
9370 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
9372 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
9373 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
9374 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
9375 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
9376 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
9377 # This was designed for a VT320 emulator, but it is probably a good start
9378 # at support for the VT320 itself.
9379 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
9380 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
9381 vt320-k3|MS-Kermit 3.00's vt320 emulation,
9382 am, eslok, hs, km, mir, msgr, xenl,
9383 cols#80, it#8, lines#49, pb#9600, vt#3,
9384 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9385 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9386 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
9387 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9388 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9389 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9390 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9391 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
9392 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
9393 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9394 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
9395 is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
9396 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
9397 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9398 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
9399 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
9400 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
9401 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
9402 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
9403 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
9404 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9405 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
9406 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
9407 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
9408 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
9409 vt320-k311|dec vt320 series as defined by kermit 3.11,
9410 am, eslok, hs, mir, msgr, xenl, xon,
9411 cols#80, it#8, lines#24, vt#3,
9412 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9413 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
9414 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
9415 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9416 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9417 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9418 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9419 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
9420 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
9421 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
9422 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
9423 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9424 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
9425 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
9426 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
9427 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
9428 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
9429 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
9430 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
9431 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
9433 ######## NON-ANSI TERMINAL EMULATIONS
9438 # These entries attempt to describe Avatar, a terminal emulation used with
9439 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
9440 # capabilities, but with cheaper (shorter) control sequences. Messy design,
9441 # excessively dependent on PC idiosyncracies, but apparently rather popular
9444 # No color support. Avatar doesn't fit either of the Tektronix or HP color
9445 # models that terminfo knows about. An Avatar color attribute is the
9446 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
9448 # I wrote these entries while looking at the Avatar spec. I don't have
9449 # the facilities to test them. Let me know if they work, or don't.
9451 # Avatar escapes not used by these entries (because maybe you're smarter
9452 # and more motivated than I am and can figure out how to wrap terminfo
9453 # around some of them, and because they are weird enough to be funny):
9455 # ^L -- clear window/reset current attribute to default
9456 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
9458 # bit: 6 5 4 3 2 1 0
9460 # +---+---+ | +---+---+
9462 # | | foreground color
9463 # | foreground intensity
9466 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
9467 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
9468 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
9469 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
9470 # (^V^L and ^V^M set the current attribute as a side-effect.)
9471 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
9472 # in the pattern, <c> the number of times the pattern
9473 # should be repeated. If either value is 0, no-op.
9474 # The pattern can contain Avatar console codes,
9475 # including other ^V ^Y patterns.
9477 # ^V^O -- clockwise mode on; turn print direction right each time you
9478 # hit a window edge (yes, really). Turned off by CR
9480 # ^V^Q%c -- query the driver
9481 # ^V^R -- driver reset
9482 # ^V^S -- Sound tone (PC-specific)
9483 # ^V^T -- change highlight at current cursor poition to %c
9484 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
9485 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
9488 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9489 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
9490 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
9491 # which is the only method that will actually work for multiple highlights.)
9493 # Update by TD - 2004: half of this was inconsistent. Found documentation
9494 # and repaired most of the damage. sgr0 is probably incorrect, but the
9495 # available documentation gives no clues for a workable string.
9496 avatar0|avatar terminal emulator level 0,
9498 cols#80, it#8, lines#25,
9499 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
9500 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
9501 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
9503 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
9504 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
9506 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9507 avatar0+|avatar terminal emulator level 0+,
9508 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
9509 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
9510 avatar|avatar1|avatar terminal emulator level 1,
9511 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
9512 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
9516 # RBComm is a lean and mean terminal emulator written by the Interrupt List
9517 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
9518 # '90s), especially in the BBS world, and still has some loyal users due to
9519 # its very small memory footprint and to a cute macro language.
9520 rbcomm|IBM PC with RBcomm and EMACS keybindings,
9521 am, bw, mir, msgr, xenl,
9522 cols#80, it#8, lines#25,
9523 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
9524 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9525 cub1=^H, cud1=^C, cuf1=^B,
9526 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
9527 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
9528 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
9529 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
9530 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
9531 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
9532 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
9533 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
9534 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
9535 rbcomm-nam|IBM PC with RBcomm without autowrap,
9537 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9538 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
9539 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9540 rbcomm-w|IBM PC with RBcomm in 132 column mode,
9542 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
9543 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
9544 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
9546 ######## LCD DISPLAYS
9550 # from: Eric Z. Ayers (eric@ale.org)
9552 # Matrix Orbital 20x4 LCD display
9553 # Command Character is 0xFE (decimal 254, octal 376)
9555 # On this device, cursor addressability isn't possible. The LCD expects:
9556 # 0xfe G <col> <row>
9557 # for cup: %p1 == row and %p2 is column
9560 # cup=\376G%p2%c%p1%c
9561 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
9562 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
9564 # Alas, there is no cursor upline capability on this display.
9566 # These entries add some 'sanity stuff' to the clear function. That is, it
9567 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
9568 # and turns off the cursor blinking and stuff like that.
9570 # NOTE: calling 'beep' turns on the backlight (bell)
9571 # NOTE: calling 'flash' turns it on and back off (visual bell)
9573 MtxOrb|Generic Matrix Orbital LCD display,
9574 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
9575 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
9576 flash=\376B\001$<200>\376F, home=\376H,
9577 MtxOrb204|20x4 Matrix Orbital LCD display,
9578 cols#20, lines#4, use=MtxOrb,
9579 MtxOrb162|16x2 Matrix Orbital LCD display,
9580 cols#16, lines#2, use=MtxOrb,
9583 ######## OLDER TERMINAL TYPES
9585 # This section is devoted to older commercial terminal brands that are now
9586 # discontinued, but known to be still in use or represented by emulations.
9589 #### AT&T (att, tty)
9591 # This section also includes Teletype-branded VDTs.
9593 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
9594 # Boundless Technologies); for details, see the header comment on the ADDS
9597 # These are AT&T's official terminfo entries. All-caps aliases have been
9600 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
9601 am, eo, mir, msgr, xon,
9602 cols#80, it#8, lines#24,
9603 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
9604 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9605 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9606 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
9607 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
9608 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9609 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9610 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
9611 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
9612 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
9613 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
9614 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9615 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
9617 att2350|AT&T 2350 Video Information Terminal 80 column mode,
9618 mc0@, mc4@, mc5@, use=att2300,
9620 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
9621 # Seems upward compatible with vt100, plus ins/del line/char.
9622 # On sgr, the protection parameter is ignored.
9623 # No check is made to make sure that only 3 parameters are output.
9624 # standout= reverse + half-intensity = 3 | 5.
9625 # bold= reverse + underline = 2 | 3.
9626 # note that half-bright blinking doesn't look different from normal blinking.
9627 # NOTE:you must program the function keys first, label second!
9628 # (att4410: a BSD entry has been seen with the following capabilities:
9629 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
9630 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
9631 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
9632 am, hs, mir, msgr, xon,
9633 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
9634 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9635 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
9636 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
9637 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
9638 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
9639 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
9640 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
9641 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9642 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
9643 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
9644 ll=\E[24H, nel=^M^J,
9645 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
9646 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
9647 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9649 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9650 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9651 tsl=\E7\E[25;%p1%{1}%+%dH,
9653 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
9655 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
9657 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
9659 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
9662 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
9664 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
9666 # 5410 in terms of a vt100
9667 # (v5410: added <rmam>/<smam> based on init string -- esr)
9668 v5410|att5410 in terms of a vt100,
9670 cols#80, it#8, lines#24, vt#3,
9671 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9672 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9673 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9674 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
9675 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
9676 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
9677 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
9678 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9679 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
9680 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
9681 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
9683 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
9684 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
9685 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9689 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
9690 # even! the 5420 has three modes: scroll, window or page mode
9691 # this terminfo should work in scroll or window mode, but doesn't
9692 # take advantage of any of the differences between them.
9694 # Has memory below (2 lines!)
9695 # 3 pages of memory (plus some spare)
9696 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
9697 # <hpa>, <hts> would work for these, but these work in both scroll and window
9698 # mode... Unset insert character so insert mode works
9699 # <is1> sets 80 column mode,
9700 # <is2> escape sequence:
9701 # 1) turn off all fonts
9702 # 2) function keys off, keyboard lock off, control display off,
9703 # insert mode off, erasure mode off,
9704 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
9705 # 4) reset origin mode
9706 # 5) set line wraparound
9707 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
9709 # 8) program ENTER to transmit ^J,
9710 # We use \212 to program the ^J because a bare ^J will get translated by
9711 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
9713 # <is3> set screen color to black,
9714 # No representation in terminfo for the delete word key: kdw1=\Ed
9715 # Key capabilities assume the power-up send sequence...
9716 # This <rmcup> is not strictly necessary, but it helps maximize
9717 # memory usefulness: <rmcup=\Ez>,
9718 # Alternate sgr0: <sgr0=\E[m\EW^O>,
9719 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
9720 # smkx programs the SYS PF keys to send a set sequence.
9721 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
9722 # This string causes them to send the strings <kf1>-<kf8>
9723 # when pressed in SYS PF mode.
9724 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
9725 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
9727 lh#2, lm#78, lw#8, nlab#8, wsl#55,
9728 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
9729 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
9730 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
9731 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
9732 flash=\E[?5h$<200>\E[?5l, home=\E[x,
9733 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
9734 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
9735 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
9736 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
9737 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
9738 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
9739 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9740 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9741 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
9742 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
9743 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
9744 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
9745 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
9746 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
9747 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9748 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
9749 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
9750 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9753 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
9754 cols#132, lm#54, wsl#97,
9755 is1=\E[?3h$<100>, use=att4415,
9757 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
9758 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
9760 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
9761 cols#132, lm#54, wsl#97,
9762 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
9765 # Note that this mode permits programming USER PF KEYS and labels
9766 # However, when you program user pf labels you have to reselect
9767 # user pf keys to make them appear!
9768 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
9769 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
9770 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
9771 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
9773 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
9774 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9777 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
9778 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9781 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
9782 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9785 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
9786 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
9789 att5420_2|AT&T 5420 model 2 80 cols,
9790 am, db, hs, mir, msgr, xon,
9791 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9792 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9793 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
9794 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9795 cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
9796 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
9797 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
9798 dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
9799 el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9800 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9801 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9803 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9804 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
9805 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
9806 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
9807 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
9808 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
9809 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9810 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
9811 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
9812 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
9813 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
9814 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
9815 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
9817 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9818 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
9819 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
9820 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
9821 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
9823 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
9826 att4418|att5418|AT&T 5418 80 cols,
9829 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9830 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
9831 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
9832 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
9833 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
9834 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
9835 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
9836 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
9837 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
9838 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
9839 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
9840 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
9841 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
9842 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
9843 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
9844 att4418-w|att5418-w|AT&T 5418 132 cols,
9846 is1=\E[?3h, use=att5418,
9848 att4420|tty4420|teletype 4420,
9849 OTbs, da, db, eo, msgr, ul, xon,
9850 cols#80, lines#24, lm#72,
9851 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
9852 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
9853 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
9854 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
9855 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
9856 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
9857 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
9858 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
9860 # The following is a terminfo entry for the Teletype 4424
9861 # asynchronous keyboard-display terminal. It supports
9862 # the vi editor. The terminal must be set up as follows,
9864 # HIGHLIGHT DEFINITION 3-TONE
9865 # DISPLAY FUNCTION GROUP III
9867 # The second entry below provides limited (a la adm3a)
9868 # operation under GROUP II.
9870 # This must be used with DISPLAY FUNCTION GROUP I or III
9871 # and HIGHLIGHT DEFINITION 3-TONE
9872 # The terminal has either bold or blink, depending on options
9874 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
9875 att4424|tty4424|teletype 4424,
9878 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9879 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
9880 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9881 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
9882 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
9883 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
9884 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
9885 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
9886 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
9887 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
9888 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
9890 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
9891 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
9894 att4424-1|tty4424-1|teletype 4424 in display function group I,
9895 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
9898 # This entry is not one of AT&T's official ones, it was translated from the
9899 # 4.4BSD termcap file. The highlight strings are different from att4424.
9900 # I have no idea why this is -- older firmware version, maybe?
9901 # The following two lines are the comment originally attached to the entry:
9902 # This entry appears to avoid the top line - I have no idea why.
9903 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
9904 att4424m|tty4424m|teletype 4424M,
9906 cols#80, it#8, lines#23,
9907 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
9908 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
9909 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
9910 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
9911 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
9912 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
9913 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
9915 # The Teletype 5425 is really version 2 of the Teletype 5420. It
9916 # is quite similar, except for some minor differences. No page
9917 # mode, for example, so all of the <cup> sequences used above have
9918 # to change back to what's being used for the 5410. Many of the
9919 # option settings have changed their numbering as well.
9921 # This has been tested on a preliminary model.
9923 # (att5425: added <rmam>/<smam> based on the init string -- esr)
9924 att5425|tty5425|att4425|AT&T 4425/5425,
9925 am, da, db, hs, mir, msgr, xenl, xon,
9926 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
9927 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9928 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
9929 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
9930 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9931 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9932 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9933 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
9934 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
9935 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
9936 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
9937 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9938 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
9939 invis=\E[8m, is1=\E<\E[?3l$<100>,
9940 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
9941 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
9942 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
9943 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
9944 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
9945 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
9946 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
9948 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
9949 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
9950 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
9951 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
9952 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
9953 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9954 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
9955 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
9956 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
9957 vpa=\E[%p1%{1}%+%dd,
9959 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
9960 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
9962 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
9963 cols#132, lm#54, wsl#97,
9964 is1=\E[?3h$<100>, use=tty5425,
9966 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
9967 # I also added <rmam>/<smam> -- esr)
9968 att4426|tty4426|teletype 4426S,
9970 cols#80, lines#24, lm#48,
9971 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
9972 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
9973 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
9974 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9975 cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
9976 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
9977 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
9978 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
9979 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
9980 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9981 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
9982 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
9983 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
9984 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
9985 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
9986 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
9989 # Terminfo entry for the AT&T 510 A Personal Terminal
9990 # Function keys 9 - 16 are available only after the
9991 # screen labeled (soft keys/action blocks) are labeled. Function key
9992 # 9 corresponds to the leftmost touch target on the screen,
9993 # function key 16 corresponds to the rightmost.
9995 # This entry is based on one done by Ernie Rice at Summit, NJ and
9996 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
9997 att510a|bct510a|AT&T 510A Personal Terminal,
9998 am, mir, msgr, xenl, xon,
9999 cols#80, lh#2, lines#24, lw#7, nlab#8,
10000 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10001 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10002 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
10003 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
10004 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10005 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
10006 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
10007 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
10008 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
10009 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
10010 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
10011 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
10012 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
10013 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
10014 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
10015 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
10016 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
10017 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
10018 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
10019 smul=\E[4m, tbc=\E[3g,
10021 # Terminfo entry for the AT&T 510 D Personal Terminal
10022 # Function keys 9 through 16 are accessed by bringing up the
10024 # Function key 9 corresponds to the leftmost touch target on the screen,
10025 # function key 16 corresponds to the rightmost.
10027 # There are problems with soft key labeling. These are due to
10028 # strangenesses in the native terminal that are impossible to
10029 # describe in a terminfo.
10030 att510d|bct510d|AT&T 510D Personal Terminal,
10031 am, da, db, mir, msgr, xenl, xon,
10032 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
10033 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10034 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10035 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
10036 cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
10037 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
10038 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
10039 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
10040 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
10041 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
10042 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
10043 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
10044 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10045 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
10046 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
10047 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
10048 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
10049 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
10050 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10051 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10052 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
10053 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
10054 rs2=\E[5;0|, sc=\E7,
10055 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10056 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
10057 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
10058 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10060 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
10061 att500|att513|AT&T 513 using page mode,
10062 am, chts, mir, msgr, xenl, xon,
10063 cols#80, lh#2, lines#24, lw#8, nlab#8,
10064 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
10065 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
10066 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
10067 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10068 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10069 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10070 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
10071 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10072 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
10073 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
10074 indn=\E[%p1%dE, invis=\E[8m,
10075 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
10076 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10077 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10078 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
10079 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
10080 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
10081 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
10082 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
10083 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10084 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
10085 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10086 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
10087 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
10088 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10089 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10090 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
10091 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
10092 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
10094 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
10095 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
10096 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
10097 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
10098 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
10099 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
10100 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
10102 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
10103 rs2=\E[5;0|, sc=\E7,
10104 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10105 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
10106 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
10107 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
10110 # printer must be set to EMUL ANSI to accept ESC codes
10111 # <cuu1> stops at top margin
10112 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
10113 # and alt font ascii,wrap on,tabs cleared
10114 # <is2> disables newline on LF,Emphasized off
10115 # The <u0> capability sets form length
10116 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
10118 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
10119 orhi#100, orl#12, orvi#72,
10120 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
10122 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
10123 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
10124 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
10125 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
10127 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
10128 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
10129 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
10130 u0=\E[%p1%dt, vpa=\E[%p1%dd,
10132 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
10133 # The following SET-UP modes are assumed for normal operation:
10134 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
10135 # Other SET-UP modes may be set for operator convenience or communication
10136 # requirements. This termcap description is for the Resident Terminal Mode.
10137 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10138 # The BRL entry also said: UNSAFE :ll=\E[70H:
10139 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
10141 cols#88, it#8, lines#70, vt#3,
10142 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10143 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10144 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10145 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
10146 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
10147 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10148 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
10151 # 5620 terminfo (2.0 or later ROMS with char attributes)
10152 # The following SET-UP modes are assumed for normal operation:
10153 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
10154 # Other SET-UP modes may be set for operator convenience or communication
10155 # requirements. This termcap description is for Resident Terminal Mode. No
10156 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10157 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
10158 # Be aware that older versions of the dmd have a firmware bug that affects
10159 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
10160 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
10161 # also has <ll>=\E[70H commented out and marked unsafe.
10162 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
10163 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
10164 OTbs, am, msgr, npc, xon,
10165 cols#88, it#8, lines#70,
10166 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
10167 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10168 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
10169 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
10170 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
10171 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10172 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
10173 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
10174 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
10175 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
10176 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
10177 lines#24, use=att5620,
10178 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
10179 lines#34, use=att5620,
10180 # 5620 layer running the "S" system's downloaded graphics handler:
10181 att5620-s|tty5620-s|layer|vitty|5620 S layer,
10183 cols#80, it#8, lines#72,
10184 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
10185 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
10186 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
10187 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10190 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
10192 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
10193 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
10194 att605|AT&T 605 80 column 102key keyboard,
10196 cols#80, lines#24, lw#8, nlab#8, wsl#80,
10197 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10198 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
10199 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
10200 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
10201 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
10202 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10203 il1=\E[L, ind=^J, invis=\E[8m,
10204 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
10205 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
10206 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10207 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
10208 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
10209 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
10210 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
10211 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
10212 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
10213 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
10214 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
10215 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
10216 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
10217 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
10218 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10219 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10220 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10221 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10222 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
10223 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10224 tsl=\E7\E[25;%i%p1%dx,
10225 att605-pc|ATT 605 in pc term mode,
10226 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
10227 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
10228 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
10229 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
10230 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
10231 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
10232 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
10233 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
10234 xonc=e, use=att605,
10235 att605-w|AT&T 605-w 132 column 102 key keyboard,
10237 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
10239 # (att610: I added <rmam>/<smam> based on the init string. I also
10240 # added <indn> and <rin> because the BSD file says the att615s have them,
10241 # and the 615 is like a 610 with a big keyboard, and most of their other
10242 # smart terminals support the same sequence -- esr)
10243 att610|AT&T 610; 80 column; 98key keyboard,
10244 am, eslok, hs, mir, msgr, xenl, xon,
10245 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10246 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10247 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10248 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10249 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10250 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10251 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10252 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10253 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10254 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10255 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10256 indn=\E[%p1%dS, invis=\E[8m,
10257 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
10258 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10259 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10260 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10261 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
10262 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10263 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
10265 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10266 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10267 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10268 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
10269 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10270 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10271 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
10272 att610-w|AT&T 610; 132 column; 98key keyboard,
10274 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10277 att610-103k|AT&T 610; 80 column; 103key keyboard,
10278 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10279 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10280 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10281 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10282 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10283 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10284 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10285 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
10286 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
10287 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
10288 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
10289 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
10290 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
10291 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
10293 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10295 att615|AT&T 615; 80 column; 98key keyboard,
10296 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10297 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10298 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10299 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10300 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10301 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10302 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
10303 att615-w|AT&T 615; 132 column; 98key keyboard,
10304 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10305 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
10306 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
10307 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
10308 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
10309 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10310 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
10311 att615-103k|AT&T 615; 80 column; 103key keyboard,
10312 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
10313 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
10314 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
10315 # (att620: I added <rmam>/<smam> based on the init string and
10316 # <rin>/<indn> from a BSD termcap -- esr)
10317 att620|AT&T 620; 80 column; 98key keyboard,
10318 am, eslok, hs, mir, msgr, xenl, xon,
10319 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10320 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10321 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10322 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10323 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10324 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10325 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10326 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10327 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10328 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
10329 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
10330 indn=\E[%p1%dS, invis=\E[8m,
10331 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
10332 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
10333 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10334 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10335 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
10336 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
10337 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
10338 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
10339 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
10340 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
10341 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
10342 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
10343 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
10344 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10345 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
10346 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
10347 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
10348 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
10349 rs2=\Ec\E[?3l, sc=\E7,
10350 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10351 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
10352 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
10353 tsl=\E7\E[25;%i%p1%dx,
10354 att620-w|AT&T 620; 132 column; 98key keyboard,
10356 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10358 att620-103k|AT&T 620; 80 column; 103key keyboard,
10359 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
10360 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
10361 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
10362 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
10363 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
10364 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
10365 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
10366 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
10367 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
10368 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
10369 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
10370 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
10371 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
10372 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
10373 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
10374 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
10376 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
10378 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
10381 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
10382 # The following SETUP modes are assumed for normal operation:
10383 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
10384 # Font_Size=Large Non-Layers_Window_Cols=80
10385 # Non-Layers_Window_Rows=60
10386 # Other SETUP modes may be set for operator convenience or communication
10387 # requirements. Some capabilities assume a printer attached to the Aux EIA
10388 # port. This termcap description is for the Fixed Non-Layers Window. No
10389 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
10390 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
10391 att630|AT&T 630 windowing terminal,
10392 OTbs, am, da, db, mir, msgr, npc, xon,
10393 cols#80, it#8, lines#60, lm#0,
10394 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
10395 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10396 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10397 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
10398 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
10399 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
10400 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
10401 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
10402 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
10403 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
10404 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
10405 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
10406 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
10407 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
10408 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
10409 rmul=\E[m, rs2=\Ec, sc=\E7,
10410 sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
10411 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10412 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
10413 lines#24, use=att630,
10415 # This is the att700 entry for 700 native emulation of the AT&T 700
10416 # terminal. Comments are relative to changes from the 605V2 entry and
10417 # att730 on which the entry is based. Comments show the terminfo
10418 # capability name, termcap name, and description.
10420 # Here is what's going onm in the init string:
10421 # ESC [ 50;4| set 700 native mode (really is 605)
10422 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
10423 # ESC [ 53;0| set GenFlow to Xon/Xoff
10424 # ESC [ 8 ;0| set CR on NL
10425 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
10426 # ESC [ ? 4 l jump scroll
10427 # ESC [ ? 5 l/h video: normal (l); reverse (h)
10428 # ESC [ ?13 l Labels on
10429 # ESC [ ?15 l parity check = no
10430 # ESC [ 13 l monitor mode off
10431 # ESC [ 20 l LF on NL (not CRLF on NL)
10432 # ESC [ ? 7 h autowrap on
10433 # ESC [ 12 h local echo off
10434 # ESC ( B GO = ASCII
10435 # ESC ) 0 G1 = Special Char & Line Drawing
10436 # ESC [ ? 31 l Set 7 bit controls
10438 # Note: Most terminals, especially the 600 family use Reverse Video for
10439 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
10440 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
10441 # standout mode with \E[m (all normal attributes). The 730 entry simply
10442 # exits reverse video which would leave other current attributes intact. It
10443 # was assumed the 730 entry to be more correct so rmso has changed. The
10444 # 605V2 has no sequences to turn individual attributes off, thus its setting
10445 # and the rmso/smso settings from the 730.
10447 # Note: For the same reason as above in rmso I changed exit under-score mode
10448 # to specifically turn off underscore, rather than return to all normal
10451 # Note: The following pkey_xmit is taken from the 605V2 which contained the
10452 # capability as pfxl. It was changed here to pfx since pfxl
10453 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
10454 # allows strings to be parameters and label values must be programmed as
10455 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
10456 # and strings to be parameters. The 605V2 pfx entry should be examined later
10457 # in this regard. For reference the 730 pfxl entry is shown here for comparison
10459 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
10460 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
10463 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10466 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10468 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
10472 # modular 10 pin Connector
10473 # Left side Right side
10474 # Pin 1 2 3 4 5 6 7 8 9 10
10476 # Key (notch) at bottom
10488 # The manual is 189 pages and is loaded with details about the escape codes,
10489 # etc..... Available from AT&T CIC 800-432-6600...
10490 # ask for Document number 999-300-660..
10492 att700|AT&T 700 24x80 column display w/102key keyboard,
10493 am, eslok, hs, mir, msgr, xenl, xon,
10494 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
10495 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10496 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10497 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10498 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10499 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10500 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10501 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10502 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10503 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
10504 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
10505 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
10506 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
10507 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
10508 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10509 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
10510 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
10511 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
10512 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
10513 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
10514 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
10515 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
10516 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
10517 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
10518 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10519 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
10520 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10521 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
10522 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10523 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10524 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
10525 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
10526 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10527 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
10528 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
10529 tsl=\E7\E[99;%i%p1%dx,
10531 # This entry was modified 3/13/90 by JWE.
10532 # fixes include additions of <enacs>, correcting <rep>, and modification
10533 # of <kHOM>. (See comments below)
10534 # att730 has status line of 80 chars
10535 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
10536 # the <kf25> and up keys are used for shifted system Fkeys
10537 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
10538 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
10539 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
10540 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
10541 # 102, 102+1, or 122 key keyboards
10543 # (att730: I added <rmam>/<smam> based on the init string -- esr)
10544 att730|AT&T 730 windowing terminal,
10545 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
10546 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
10547 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10548 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10549 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
10550 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10551 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10552 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10553 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
10554 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
10555 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
10556 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
10557 ind=\ED, invis=\E[8m,
10558 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
10559 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
10560 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10561 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
10562 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
10563 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
10564 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
10565 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
10566 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
10567 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
10568 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
10569 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
10570 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
10571 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
10572 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
10573 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
10574 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
10575 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
10576 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
10577 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
10578 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
10579 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10580 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10581 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
10582 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
10583 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
10584 lines#41, use=att730,
10585 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
10586 lines#24, use=att730,
10587 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
10588 flash=\E[?5l$<200>\E[?5h,
10589 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
10591 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
10592 lines#41, use=att730r,
10593 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
10594 lines#24, use=att730r,
10596 # The following represents the screen layout along with the associated
10597 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
10598 # not appear on the screen but are shown to reference the bezel buttons.
10599 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
10600 # position relative to the screen.
10604 # +----------------------------------------------------------------+
10606 # XXXX | kf0 kf24 | XXXX
10609 # XXXX | kf1 kf23 | XXXX
10612 # XXXX | kf2 kf22 | XXXX
10615 # XXXX | kf3 kf21 | XXXX
10618 # XXXX | kf4 kf20 | XXXX
10621 # XXXX | kf5 kf19 | XXXX
10624 # XXXX | kf6 kf18 | XXXX
10630 # +----------------------------------------------------------------+
10632 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
10634 # Note: XXXX represents the screen buttons
10640 # The character string sent by key 'kf26' may be user programmable
10641 # to send either \E[16s, or \E[26s.
10642 # The character string sent by key 'krfr' may be user programmable
10643 # to send either \E[17s, or \E[27s.
10645 # Depression of the "CMD" key sends \E! (kcmd)
10646 # Depression of the "MAIL" key sends \E[26s (kf26)
10647 # "REDRAW" same as "REFRESH" (krfr)
10649 # "kf" functions adds carriage return to output string if terminal is in
10652 # The following are functions not covered in the table above:
10654 # Set keyboard character (SKC): \EPn1;Pn2w
10655 # Pn1= 0 Back Space key
10657 # Pn2= Program char (hex)
10659 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
10660 # Pn1= Window number (1-39)
10661 # Pn2-Pn5= Y;X;Y;X coordinates
10663 # Screen Selection (SSL): \E[Pnu
10664 # Pn= Window number
10666 # Set Terminal Modes (SM): \E[Pnh
10667 # Pn= 3 Graphics mode
10668 # Pn= > Cursor blink
10669 # Pn= < Enter new line mode
10670 # Pn= = Enter reverse insert/replace mode
10671 # Pn= ? Enter no scroll mode
10673 # Reset Terminal Mode (RM): \E[Pnl
10674 # Pn= 3 Exit graphics mode
10675 # Pn= > Exit cursor blink
10676 # Pn= < Exit new line mode
10677 # Pn= = Exit reverse insert/replace mode
10678 # Pn= ? Exit no scroll mode
10680 # Screen Status Report (SSR): \E[Pnp
10681 # Pn= 0 Request current window number
10682 # Pn= 1 Request current window dimensions
10684 # Device Status Report (DSR): \E[6n Request cursor position
10686 # Call Status Report (CSR): \E[Pnv
10687 # Pn= 0 Call failed
10688 # Pn= 1 Call successful
10690 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
10691 # Pn1= Button number to be loaded
10692 # Pn2= Character count of "string"
10693 # Pn3= Key mode being loaded:
10697 # String= Text string (15 chars max)
10699 # Screen Number Report (SNR): \E[Pnp
10700 # Pn= Screen number
10702 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
10703 # Pn1= Number of rows available in window
10704 # Pn2= Number of columns available in window
10706 # Cursor Position Report (CPR): \E[Pn1;Pn2R
10707 # Pn1= "Y" Position of cursor
10708 # Pn2= "X" Position of cursor
10710 # Request Answer Back (RAB): \E[c
10712 # Answer Back Response (ABR): \E[?;*;30;VSV
10713 # *= 0 No printer available
10714 # *= 2 Printer available
10715 # V= Software version number
10716 # SV= Software sub version number
10717 # (printer-available field not documented in v1)
10719 # Screen Alignment Aid: \En
10721 # Bell (lower pitch): \E[x
10723 # Dial Phone Number: \EPdstring\
10724 # string= Phone number to be dialed
10726 # Set Phone Labels: \EPpstring\
10727 # string= Label for phone buttons
10729 # Set Clock: \EPchour;minute;second\
10731 # Position Clock: \EPsY;X\
10732 # Y= "Y" coordinate
10733 # X= "X" coordinate
10735 # Delete Clock: \Epr\
10737 # Programming The Function Buttons: \EPfPn;string\
10738 # Pn= Button number (00-06, 18-24)
10739 # (kf00-kf06, kf18-kf24)
10740 # string= Text to sent on button depression
10742 # The following in version 2 only:
10744 # Request For Local Directory Data: \EPp12;\
10746 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
10748 # Request for Local Directory Data in print format: \EPp13;\
10750 # Enable 'Prt on Line' mode: \022 (DC2)
10752 # Disable 'Prt on Line' mode: \024 (DC4)
10756 # The following Terminfo entry describes functions which are supported by
10757 # the AT&T 5430/pt505 terminal software version 2 and later.
10758 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
10760 cols#80, it#8, lines#24,
10761 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10762 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
10763 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
10764 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
10765 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10766 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
10767 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
10768 il=\E[%p1%dL, il1=\E[L, ind=^J,
10769 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
10770 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10771 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
10772 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
10773 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
10774 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
10775 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10776 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
10777 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
10778 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
10780 # The following Terminfo entry describes functions which are supported by
10781 # the AT&T 5430/pt505 terminal software version 1.
10782 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
10784 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
10785 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
10786 lines#22, use=att505,
10788 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
10789 # This cut mark helps make life less painful for people running ncurses tic
10790 # on machines with relatively little RAM. The file can be broken in half here
10791 # cleanly and compiled in sections -- no `use' references cross this cut
10795 #### Ampex (Dialogue)
10797 # Yes, these are the same people who are better-known for making audio- and
10798 # videotape. I'm told they are located in Redwood City, CA.
10801 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
10802 # (ampex80: some capabilities merged in from SCO's entry -- esr)
10803 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
10805 cols#80, it#8, lines#24,
10806 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
10807 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10808 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
10809 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
10810 smso=\Ej, smul=\El, tbc=\E3,
10811 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
10812 ampex175|ampex d175,
10815 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10816 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10817 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
10818 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
10819 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
10820 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
10821 # No backspace key in the main QWERTY cluster. Fortunately, it has a
10822 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
10823 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
10824 # mode), this key can be used as the erase key; I find I like this. Because
10825 # some people and some systems may not, there is another termcap ("ampex175")
10826 # that suppresses this little eccentricity by omitting the relevant capability.
10827 ampex175-b|ampex d175 using left arrow for erase,
10828 kbs=^_, use=ampex175,
10829 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
10830 # (ampex210: removed obsolete ":kn#10:" -- esr)
10831 ampex210|a210|ampex a210,
10832 OTbs, am, hs, xenl,
10833 cols#80, it#8, lines#24, xmc#1,
10834 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
10835 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10836 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
10837 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
10838 if=/usr/share/tabset/std, il1=\EE, invis@,
10839 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
10840 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
10841 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
10842 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
10843 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
10844 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
10845 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
10846 # and moved the padding to be *after* the caps -- esr)
10847 ampex219|ampex-219|amp219|Ampex with Automargins,
10849 cols#80, it#8, lines#24,
10850 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
10851 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
10852 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
10853 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
10854 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
10855 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
10856 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
10857 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
10858 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
10859 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
10860 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
10861 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
10862 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
10863 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
10864 cols#132, lines#24,
10865 bel=^G, cr=^M, cud1=^J, ind=^J,
10866 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
10867 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
10868 ampex232|ampex-232|Ampex Model 232,
10870 cols#80, lines#24, xmc#1,
10871 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
10872 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10873 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
10874 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
10875 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
10876 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
10877 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
10878 kf9=^AI\r, khome=^^, use=adm+sgr,
10879 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
10880 ampex232w|Ampex Model 232 / 132 columns,
10881 cols#132, lines#24,
10882 is2=\E\034Eg\El, use=ampex232,
10884 #### Ann Arbor (aa)
10886 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
10887 # numbers of function keys. At least some used monitors in portrait mode,
10888 # allowing up to 76-character screen heights! They were reachable at:
10890 # Ann Arbor Terminals
10891 # 6175 Jackson Road
10892 # Ann Arbor, MI 48103
10895 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
10896 # can't be found on the Web; I fear they're long dead. R.I.P.
10900 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
10901 # Highly modified 6/22 by Mike O'Brien.
10902 # split out into several for the various screen sizes by dave-yost@rand
10903 # Modifications made 3/82 by Mark Horton
10904 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
10905 # status line moved to top of screen, <flash> removed 5/82
10906 # Some unknown person at SCO then hacked the init strings to make them more
10909 # assumes the following setup:
10910 # A menu: 0000 1010 0001 0000
10911 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
10912 # C menu: 56 66 0 0 9600 0110 1100
10913 # D menu: 0110 1001 1 0
10915 # Briefly, the settings are for the following modes:
10916 # (values are for bit set/clear with * indicating our preference
10917 # and the value used to test these termcaps)
10918 # Note that many of these settings are irrelevent to the terminfo
10919 # and are just set to the default mode of the terminal as shipped
10922 # A menu: 0000 1010 0001 0000
10923 # Block/underline cursor*
10924 # blinking/nonblinking cursor*
10925 # key click/no key click*
10926 # bell/no bell at column 72*
10928 # key pad is cursor control*/key pad is numeric
10929 # return and line feed/return for <cr> key *
10930 # repeat after .5 sec*/no repeat
10931 # repeat at 25/15 chars per sec. *
10933 # hold data until pause pressed/process data unless pause pressed*
10934 # slow scroll/no slow scroll*
10935 # Hold in area/don't hold in area*
10936 # functions keys have default*/function keys disabled on powerup
10938 # show/don't show position of cursor during page transmit*
10943 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
10944 # Baud rate (9600*)
10946 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
10947 # 1 stop bit*/2 stop bits
10948 # parity error detection off*/on
10950 # keyboard local/on line*
10951 # half/full duplex*
10952 # disable/do not disable keyboard after data transmission*
10954 # transmit entire page/stop transmission at cursor*
10955 # transfer/do not transfer protected characters*
10956 # transmit all characters/transmit only selected characters*
10957 # transmit all selected areas/transmit only 1 selected area*
10959 # transmit/do not transmit line separators to host*
10960 # transmit/do not transmit page tab stops tabs to host*
10961 # transmit/do not transmit column tab stop tabs to host*
10962 # transmit/do not transmit graphics control (underline,inverse..)*
10964 # enable*/disable auto XON/XOFF control
10965 # require/do not require receipt of a DC1 from host after each LF*
10966 # pause key acts as a meta key/pause key is pause*
10974 # XON character (17*)
10975 # XOFF character (19*)
10977 # C menu: 56 66 0 0 9600 0110 1100
10978 # number of lines to print data on (printer) (56*)
10980 # number of lines on a sheet of paper (printer) (66*)
10982 # left margin (printer) (0*)
10984 # number of pad chars on new line to printer (0*)
10986 # printer baud rate (9600*)
10988 # printer parity: 00=odd,01=even*,10=space,11=mark
10989 # printer stop bits: 2*/1
10990 # print/do not print guarded areas*
10992 # new line is: 01=LF,10=CR,11=CRLF*
10996 # D menu: 0110 1001 1 0
10997 # LF is newline/LF is down one line, same column*
10998 # wrap to preceding line if move left from col 1*/don't wrap
10999 # wrap to next line if move right from col 80*/don't wrap
11000 # backspace is/is not destructive*
11002 # display*/ignore DEL character
11003 # display will not/will scroll*
11004 # page/column tab stops*
11005 # erase everything*/erase unprotected only
11007 # editing extent: 0=display,1=line*,2=field,3=area
11012 annarbor4080|aa4080|ann arbor 4080,
11015 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
11016 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
11017 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
11018 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
11020 # Strange Ann Arbor terminal from BRL
11021 aas1901|Ann Arbor K4080 w/S1901 mod,
11024 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
11025 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
11028 # If you're using the GNU termcap library, add
11029 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
11030 # to these capabilities. This is the nonstandard GNU termcap scrolling
11031 # capability, arguments are:
11032 # 1. Total number of lines on the screen.
11033 # 2. Number of lines above desired scroll region.
11034 # 3. Number of lines below (outside of) desired scroll region.
11035 # 4. Total number of lines on the screen, the same as the first parameter.
11036 # The generic Ann Arbor entry is the only one that uses this.
11037 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
11038 OTbs, am, km, mc5i, mir, xon,
11040 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11041 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
11042 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
11043 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11044 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11045 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11046 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
11047 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
11048 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
11049 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11050 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
11051 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
11052 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
11053 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
11054 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
11055 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
11056 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
11057 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
11058 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
11059 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
11060 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
11062 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
11063 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
11064 vpa=\E[%p1%{1}%+%dd,
11066 aaa+rv|ann arbor ambassador in reverse video,
11067 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
11068 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11069 rs1=\E[H\E[7m\E[J$<156>,
11070 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11071 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
11072 # Ambassador with the DEC option, for partial vt100 compatibility.
11073 aaa+dec|ann arbor ambassador in dec vt100 mode,
11074 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
11075 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
11076 sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
11078 aaa-18|ann arbor ambassador/18 lines,
11080 is2=\E7\E[60;0;0;18p\E8,
11081 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
11083 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
11084 use=aaa+rv, use=aaa-18,
11085 aaa-20|ann arbor ambassador/20 lines,
11087 is2=\E7\E[60;0;0;20p\E8,
11088 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
11090 aaa-22|ann arbor ambassador/22 lines,
11092 is2=\E7\E[60;0;0;22p\E8,
11093 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
11095 aaa-24|ann arbor ambassador/24 lines,
11097 is2=\E7\E[60;0;0;24p\E8,
11098 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
11100 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
11101 use=aaa+rv, use=aaa-24,
11102 aaa-26|ann arbor ambassador/26 lines,
11104 is2=\E7\E[60;0;0;26p\E8,
11105 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
11106 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
11107 aaa-28|ann arbor ambassador/28 lines,
11109 is2=\E7\E[60;0;0;28p\E8,
11110 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
11111 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
11112 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
11115 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11116 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
11117 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
11118 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
11119 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11120 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
11121 use=aaa+rv, use=aaa-30-s,
11122 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
11123 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11124 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
11125 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
11126 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
11127 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
11128 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
11130 is2=\E7\E[60;0;0;30p\E8,
11131 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
11132 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
11133 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
11134 use=aaa+rv, use=aaa-30,
11135 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
11136 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11138 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
11139 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
11140 use=aaa+rv, use=aaa-30,
11141 aaa-36|ann arbor ambassador/36 lines,
11143 is2=\E7\E[60;0;0;36p\E8,
11144 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
11145 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
11146 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
11147 use=aaa+rv, use=aaa-36,
11148 aaa-40|ann arbor ambassador/40 lines,
11150 is2=\E7\E[60;0;0;40p\E8,
11151 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
11152 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
11153 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
11154 use=aaa+rv, use=aaa-40,
11155 aaa-48|ann arbor ambassador/48 lines,
11157 is2=\E7\E[60;0;0;48p\E8,
11158 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
11159 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
11160 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
11161 use=aaa+rv, use=aaa-48,
11162 aaa-60-s|ann arbor ambassador/59 lines+status,
11165 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
11166 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
11167 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
11168 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
11169 use=aaa+rv, use=aaa-60-s,
11170 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
11171 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
11172 aaa-60|ann arbor ambassador/60 lines,
11174 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
11176 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
11177 use=aaa+rv, use=aaa-60,
11178 aaa-db|ann arbor ambassador 30/destructive backspace,
11180 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
11182 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
11184 flash=\E[>59h$<100>\E[>59l,
11185 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
11186 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
11187 guru+rv|guru changes for reverse video,
11188 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
11189 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
11190 use=guru+rv, use=guru-33,
11191 guru+s|guru status line,
11193 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
11194 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
11195 tsl=\E[>51h\E[1;%p1%dH\E[2K,
11196 guru-nctxt|guru with no saved context,
11197 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
11198 guru-s|guru-33-s|ann arbor guru/33 lines+status,
11200 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
11201 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11202 guru-24|ann arbor guru 24 lines,
11204 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
11206 guru-44|ann arbor guru 44 lines,
11208 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
11210 guru-44-s|ann arbor guru/44 lines+status,
11212 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
11213 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11214 guru-76|guru with 76 lines by 89 cols,
11216 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
11218 guru-76-s|ann arbor guru/76 lines+status,
11220 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
11221 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11222 guru-76-lp|guru-lp|guru with page bigger than line printer,
11223 cols#134, lines#76,
11224 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
11226 guru-76-w|guru 76 lines by 178 cols,
11227 cols#178, lines#76,
11228 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
11230 guru-76-w-s|ann arbor guru/76 lines+status+wide,
11231 cols#178, lines#75,
11232 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
11233 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
11234 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
11235 cols#178, lines#76,
11236 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
11238 aaa-rv-unk|ann arbor unknown type,
11239 lh#0, lw#0, nlab#0,
11240 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
11241 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
11243 sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
11244 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
11246 #### Applied Digital Data Systems (adds)
11248 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
11249 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
11250 # terminals was merged again. Then AT&T sold the terminal business to
11251 # SunRiver, which later changed its name to Boundless Technologies. The
11252 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
11253 # as of early 1995) are at:
11255 # Boundless Technologies
11256 # 100 Marcus Boulevard
11257 # Hauppauge, NY 11788-3762
11258 # Vox: (800)-231-5445
11259 # Fax: (516)-342-7378
11260 # Web: http://boundless.com
11262 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
11263 # In 1995 Boundless acquired DEC's terminals business.
11266 # Regent: lowest common denominator, works on all regents.
11267 # (regent: renamed ":bc:" to ":le:" -- esr)
11268 regent|Adds Regent Series,
11271 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
11272 home=\EY\s\s, ind=^J, ll=^A,
11273 # Regent 100 has a bug where if computer sends escape when user is holding
11274 # down shift key it gets confused, so we avoid escape.
11275 regent100|Adds Regent 100,
11278 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
11279 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
11280 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
11281 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
11282 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
11283 regent20|Adds Regent 20,
11284 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
11286 regent25|Adds Regent 25,
11287 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
11289 regent40|Adds Regent 40,
11291 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
11292 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11293 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
11294 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
11295 smul=\E0`, use=regent25,
11296 regent40+|Adds Regent 40+,
11297 is2=\EB, use=regent40,
11298 regent60|regent200|Adds Regent 60,
11299 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
11300 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
11302 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
11303 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
11304 viewpoint|addsviewpoint|adds viewpoint,
11307 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
11308 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
11309 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
11310 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
11311 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
11312 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
11313 # Some viewpoints have bad ROMs that foo up on ^O
11314 screwpoint|adds viewpoint with ^O bug,
11315 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
11317 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
11318 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
11319 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
11320 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
11321 # invis=01000100 and %c is the logical or of desired attributes.
11322 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
11324 # Update by TD - 2004:
11326 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
11328 # COMMANDS ASCII CODE
11330 # Address, Absolute ESC,=,row,column
11332 # Aux Port Enable ESC,@
11333 # Aux Port Disable ESC,A
11337 # Cursor forward FF
11340 # Cursor supress ETB
11341 # Cursor enable CAN
11342 # Erase to end of line ESC,T
11343 # Erase to end of page ESC,Y
11346 # Keyboard unlock SO
11347 # Read current cursor position ESC,?
11348 # Set Attribute ESC,0,x (see below for values of x)
11349 # Tag bit reset ESC,(
11350 # Tag bit set ESC,)
11351 # Transparent Print on ESC,3
11352 # Transparent Print off ESC,4
11358 # Half Intensity A 0101
11360 # Half Intensity Blinking C 0103
11361 # Reverse Video P 0120
11362 # Reverse Video Half Intensity Q 0121
11363 # Reverse Video Blinking R 0122
11364 # Reverse Video Half Intensity
11366 # Underlined ` 0140
11367 # Underlined Half Intensity a 0141
11368 # Underlined Blinking b 0142
11369 # Underlined Half Intensity
11371 # Video suppress D 0104
11372 vp3a+|viewpoint3a+|adds viewpoint 3a+,
11374 cols#80, it#8, lines#24,
11375 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
11376 cub1=^H, cud1=^J, cuf1=^L,
11377 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
11378 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
11379 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
11380 nel=^M^J, rev=\E0P\E), rmso=\E(,
11381 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
11382 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
11383 vp60|viewpoint60|addsvp60|adds viewpoint60,
11386 # adds viewpoint 90 - from cornell
11387 # Note: emacs sends ei occasionally to insure the terminal is out of
11388 # insert mode. This unfortunately puts the viewpoint90 IN insert
11389 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
11390 # - :ei=:im=: must be present in the termcap translation.)
11391 # - <xhp> indicates glitch that attributes stick to location
11392 # - <msgr> means it's safe to move in standout mode
11393 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
11395 # Function key and label capabilities merged in from SCO.
11396 vp90|viewpoint90|adds viewpoint 90,
11397 OTbs, bw, msgr, xhp,
11399 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
11400 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
11401 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
11402 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
11403 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
11404 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
11405 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
11406 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
11407 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
11408 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
11409 # Note: if return acts weird on a980, check internal switch #2
11410 # on the top chip on the CONTROL pc board.
11411 adds980|a980|adds consul 980,
11414 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
11415 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
11416 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
11417 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
11418 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
11420 #### C. Itoh Electronics
11422 # As of 1995 these people no longer make terminals (they're still in the
11423 # printer business). Their terminals were all clones of the DEC VT series.
11424 # They're located in Orange County, CA.
11427 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
11428 # the delay times and do an auto tab set rather than the indirect
11429 # file used in vt100.
11430 cit80|cit-80|citoh 80,
11433 clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
11434 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
11435 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11436 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
11437 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
11438 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
11439 cit101|citc|C.itoh fast vt100,
11442 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
11443 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
11444 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
11445 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
11446 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
11447 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11448 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
11449 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
11451 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
11452 # The following termcap entry was created from the Callan cd100 entry. The
11453 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
11454 # full selection of combinations of reverse video, underline, and blink.
11455 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
11456 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
11457 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
11458 cit101e|C. Itoh CIT-101e,
11459 OTbs, OTpt, am, mir, msgr,
11460 cols#80, it#8, lines#24,
11461 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
11462 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
11463 cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
11464 el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
11465 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
11466 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
11467 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
11468 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
11469 smkx=\E=, smso=\E[7m, smul=\E[4m,
11470 # From: David S. Lawyer, June 1997:
11471 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
11472 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
11473 # late 1980's CIT Terminals went out of business.
11474 # There is no need to use the initialization string is=... (by invoking
11475 # tset or setterm etc.) provided that the terminal has been manually set
11476 # up (and the setup saved with ^S) to be compatible with this termcap. To be
11477 # compatible it should be in ANSI mode (not VT52). A set-up that
11478 # works is to set all the manually setable stuff to factory defaults
11479 # by pressing ^D in set-up mode. Then increse the brighness with the
11480 # up-arrow key since the factory default will likely be dim on an old
11481 # terminal. Then change any options you want (provided that they are
11482 # compatible with the termcap). For my terminal I set: Screen
11483 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
11484 # on. I also set up mine for parity (but you may not need it). Then
11485 # save the setup with ^S.
11486 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
11487 cit101e-rv|Citoh CIT-101e (sets reverse video),
11488 am, eo, mir, msgr, xenl, xon,
11489 cols#80, it#8, lines#24,
11490 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11491 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
11492 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11493 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11494 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11495 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
11496 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
11497 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11498 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11499 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
11500 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11501 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
11502 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
11503 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
11504 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
11505 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
11506 u7=\E[6n, u8=\E[?6c, u9=\E[c,
11507 cit101e-n|CIT-101e w/o am,
11509 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11511 cit101e-132|CIT-101e with 132 cols,
11513 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
11514 cit101e-n132|CIT-101e with 132 cols w/o am,
11517 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
11519 # CIE Terminals CIT-500 from BRL
11520 # The following SET-UP modes are assumed for normal operation:
11521 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
11522 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
11523 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
11524 # Other SET-UP modes may be set for operator convenience or communication
11526 # Hardware tabs are assumed to be set every 8 columns; they can be set up
11527 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
11528 # "stty ixon -ixany" to enable DC3/DC1 flow control!
11529 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
11530 cit500|CIE Terminals CIT-500,
11531 OTbs, OTpt, mir, msgr, xon,
11532 OTkn#10, cols#80, it#8, lines#64, vt#3,
11533 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
11534 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11535 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11536 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11537 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11538 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
11539 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
11540 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
11541 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
11542 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
11543 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
11544 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
11545 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
11546 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
11547 rmso=\E[m, rmul=\E[m,
11548 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
11549 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
11550 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11552 # C. Itoh printers begin here
11553 citoh|ci8510|8510|c.itoh 8510a,
11556 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
11557 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
11559 citoh-pica|citoh in pica,
11560 is1=\EN, use=citoh,
11561 citoh-elite|citoh in elite,
11564 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
11566 citoh-comp|citoh in compressed,
11569 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
11571 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
11572 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
11574 is1=\EP, use=citoh,
11575 citoh-6lpi|citoh in 6 lines per inch mode,
11576 is3=\EA, use=citoh,
11577 citoh-8lpi|citoh in 8 lines per inch mode,
11579 is3=\EB, use=citoh,
11581 #### Control Data (cdc)
11584 cdc456|cdc 456 terminal,
11587 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
11588 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
11589 el=^V, home=^Y, il1=\EL, ind=^J,
11591 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
11595 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11596 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11597 kcuu1=^W, khome=^Y,
11598 cdc721ll|CDC Vikingll,
11600 cols#132, lines#24,
11601 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
11602 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
11603 kcuu1=^W, khome=^Y,
11604 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
11608 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11609 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
11610 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
11612 # The following switch/key settings are assumed for normal operation:
11613 # 96 chars SCROLL FULL duplex not BLOCK
11614 # Other switches may be set according to communication requirements.
11615 # Insert/delete-character cannot be used, as the whole display is affected.
11616 # "so" & "se" are commented out until jove handles "sg" correctly.
11619 OTkn#10, cols#80, lines#24,
11620 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
11621 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
11622 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
11623 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
11624 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
11625 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
11626 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
11627 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
11628 rs1=\031\030\002\003\017,
11630 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
11632 # Part of the long initialization string defines the "DOWN" key to the left
11633 # of the tab key to send an ESC. The real ESC key is positioned way out
11636 # The termcap won't work in 132 column mode due to the way it it moves the
11637 # cursor. Termcap doesn't have the capability (as far as I could tell) to
11638 # handle the 721 in 132 column mode.
11640 # (cdc721: changed :ri: to :sr: -- esr)
11641 cdc721-esc|Control Data 721,
11642 OTbs, OTpt, am, bw, msgr, xon,
11643 OTkn#10, cols#80, it#8, lines#30,
11644 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
11645 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
11646 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
11647 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
11648 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
11649 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
11650 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
11651 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
11652 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
11653 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
11654 smso=^^D, smul=^\, tbc=^^^RY,
11658 # Getronics is a Dutch electronics company that at one time was called
11659 # `Geveke' and made async terminals; but (according to the company itself!)
11660 # they've lost all their documentation on the command set. The hardware
11661 # documentation suggests the terminals were actually manufactured by a
11662 # Taiwanese electronics company named Cal-Comp. There are known
11663 # to have been at least two models, the 33 and the 50.
11666 # The 50 seems to be a top end vt220 clone, with the addition of a higher
11667 # screen resolution, a larger screen, at least 1 page of memory above and
11668 # below the screen, apparently pages of memory right and left of the screen
11669 # which can be panned, and about 75 function keys (15 function keys x normal,
11670 # shift, control, func A, func B). It also has more setup possibilities than
11671 # the vt220. The monitor case is dated November 1978 and the keyboard case is
11674 # The vt100 emulation works as is. The entry below describes the rather
11675 # non-conformant (but more featureful) ANSI mode.
11677 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
11678 visa50|geveke visa 50 terminal in ansi 80 character mode,
11681 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
11682 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
11683 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
11684 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11685 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11686 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
11687 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
11688 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11689 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
11690 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
11691 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
11692 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
11693 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
11694 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
11695 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
11696 lf3=A insert line, lf4=A delete line, lf5=A clear,
11697 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
11698 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
11699 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
11700 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
11701 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
11704 #### Human Designed Systems (Concept)
11706 # Human Designed Systems
11708 # King of Prussia, PA 19406
11709 # Vox: (610)-277-8300
11710 # Fax: (610)-275-5739
11711 # Net: support@hds.com
11713 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
11714 # the character-terminal business now (1995) and making X terminals. In
11715 # particular, the whole `Concept' line described here was discontinued long
11719 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
11720 # Extensive changes to c108 by arpavax:eric Feb 1982
11721 # Some unknown person at SCO then translated it to terminfo.
11723 # There seem to be a number of different versions of the C108 PROMS
11724 # (with bug fixes in its Z-80 program).
11726 # The first one that we had would lock out the keyboard of you
11727 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
11728 # Try that on your C108 and see if it sends a ^S when you type it.
11729 # If so, you have an old version of the PROMs.
11731 # You should configure the C108 to send ^S/^Q before running this.
11732 # It is much faster (at 9600 baud) than the c100 because the delays
11734 # new status line display entries for c108-8p:
11735 # <is3> - init str #3 - setup term for status display -
11736 # set programmer mode, select window 2, define window at last
11737 # line of memory, set bkgnd stat mesg there, select window 0.
11739 # <tsl> - to status line - select window 2, home cursor, erase to
11740 # end-of-window, 1/2 bright on, goto(line#0, col#?)
11742 # <fsl> - from status line - 1/2 bright off, select window 0
11744 # <dsl> - disable status display - set bkgnd status mesg with
11747 # There are probably more function keys that should be added but
11748 # I don't know what they are.
11750 # No delays needed on c108 because of ^S/^Q handshaking
11752 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
11753 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
11754 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
11755 c108-4p|concept108-4p|concept 108 w/4 pages,
11756 OTbs, eslok, hs, xon,
11758 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
11759 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
11760 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
11761 ind=^J, is1=\EK\E!\E F,
11762 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
11763 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
11764 smcup=\EU\Ev 8p\Ep\r\E\025,
11765 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
11766 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
11767 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
11769 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
11770 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
11772 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
11774 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
11775 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
11778 # These have only window relative cursor addressing, not screen
11779 # relative. To get it to work right here, smcup/rmcup (which
11780 # were invented for the concept) lock you into a one page
11781 # window for screen style programs.
11783 # To get out of the one page window, we use a clever trick:
11784 # we set the window size to zero ("\Ev " in rmcup) which the
11785 # terminal recognizes as an error and resets the window to all
11788 # This trick works on c100 but does not on c108, sigh.
11790 # Some tty drivers use cr3 for concept, others use nl3, hence
11791 # the delays on cr and ind below. This padding is only needed at
11792 # 9600 baud and up. One or the other is commented out depending on
11793 # local conventions.
11795 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
11796 # less than 6 but more than 2 will work.
11798 # Note: can't use function keys f7-f10 because they are
11799 # indistinguishable from arrow keys (!), also, del char and
11800 # clear eol use xon/xoff so they probably won't work very well.
11802 # Also note that we don't define insrt/del char/delline/eop/send
11803 # because they don't transmit unless we reset them - I figured
11804 # it was a bad idea to clobber their definitions.
11806 # The <mc5> sequence changes the escape character to ^^ so that
11807 # escapes will be passed through to the printer. Only trouble
11808 # is that ^^ won't be - ^^ was chosen to be unlikely.
11809 # Unfortunately, if you're sending raster bits through to be
11810 # plotted, any character you choose will be likely, so we lose.
11812 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
11813 # cannot be # in is2 because it will hang a c100 with no printer
11815 c100|concept100|concept|c104|c100-4p|hds concept 100,
11816 OTbs, am, eo, mir, ul, xenl,
11817 cols#80, lines#24, pb#9600, vt#8,
11818 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
11819 cub1=^H, cud1=^J, cuf1=\E=,
11820 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
11821 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
11822 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
11823 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
11825 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
11826 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
11827 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
11828 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
11829 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
11830 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
11831 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
11832 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
11833 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
11834 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
11835 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
11836 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
11837 smso=\ED, smul=\EG,
11838 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
11839 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
11840 smso=\EE, use=c100,
11841 oc100|oconcept|c100-1p|old 1 page concept 100,
11845 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
11846 # Lots of notes, originally inline, but ncurses doesn't grok that.
11848 # am: not available in power on mode, but turned on with \E[=107;207h in
11849 # is2=. Also, \E=124l in is2= could have been used to prevent needing
11850 # to specify xenl:, but that would have rendered the last space on the
11851 # last line useless.
11852 # bw: Not available in power on mode, but turned on with \E[=107;207h in
11854 # clear: Could be done with \E[2J alone, except that vi (and probably most
11855 # other programs) assume that this also homes the cursor.
11856 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
11857 # scroll the window, and go back to window 1.
11858 # is2: the string may cause a warning to be issued by tic that it
11859 # found a very long line and that it suspects that a comma is missing
11860 # somewhere. This warning can be ignored (unless it comes up more than
11861 # once). The initialization string contains the following commands:
11863 # [Setup mode items changed from factory defaults:]
11864 # \E)0 set alternate character set to
11866 # ^O set character set to default
11867 # [In case it wasn't]
11868 # \E[m turn off all attributes
11869 # [In case they weren't off]
11870 # \E[=107; cursor wrap and
11871 # 207h character wrap on
11872 # \E[90;3u set Fkey definitions to "transmit"
11874 # \E[92;3u set cursor key definitions to
11875 # "transmit" defaults
11876 # \E[43;1u set shift F13 to transmit...
11878 # \E[44;1u set shift F14 to transmit...
11880 # \E[45;1u set shift F15 to transmit...
11882 # \E[46;1u set shift F16 to transmit...
11884 # \E[200;1u set shift up to transmit...
11886 # \E[201;1u set shift down to transmit...
11888 # \E[202;1u set shift right to transmit...
11890 # \E[203;1u set shift left to transmit...
11892 # \E[204;1u set shift home to transmit...
11894 # \E[212;1u set backtab to transmit...
11896 # \E[213;1u set shift backspace to transmit...
11898 # \E[214;1u set shift del to transmit...
11900 # [Necessary items not mentioned in setup mode:]
11901 # \E[2!w move to window 2
11902 # \E[25;25w define window as line 25 of memory
11903 # \E[!w move to window 1
11904 # \E[2*w show current line of window 2 as
11906 # \E[2+x set meta key to use high bit
11907 # \E[;3+} move underline to bottom of character
11909 # All Fkeys are set to their default transmit definitions with \E[90;3u
11910 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
11911 # setting MUST be redefined or deactivated, because the default is
11912 # contained in almost all of this terminal's Fkey strings! If for some
11913 # reason "quit" cannot be altered, the Fkeys can, but it would be
11914 # necessary to change ^| to ^] in all of these definitions, and add
11915 # \E[2;029!t to is2.
11916 # lines: is set to 24 because this terminal refuses to treat the 25th
11918 # ll: Not available in power on mode, but turned on with \E[=107;207h in
11920 # lm: Pointless, given that this definition locks a single screen of
11921 # memory into view, but what the hey...
11922 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
11923 # other attributes alone), but some programs expect this to turn off
11925 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
11926 # attributes alone), but some programs expect this to turn off
11928 # sgr: Attributes are set on this terminal with the string \E[ followed by
11929 # a list of attribute code numbers (in decimal, separated by
11930 # semicolons), followed by the character m. The attribute code
11933 # 2 for dim (which is ignored in power on mode);
11937 # 8 for not displayable; and
11938 # =99 for protected (except that there are strange side
11939 # effects to protected characters which make them inadvisable).
11940 # The mapping of terminfo parameters to attributes is as follows:
11941 # %p1 (standout) = bold and inverse together;
11942 # %p2 (underline) = underline;
11943 # %p3 (reverse) = inverse;
11944 # %p4 (blink) = blinking;
11945 # %p5 (dim) is ignored;
11946 # %p6 (bold) = bold;
11947 # %p7 (invisible) = not displayable;
11948 # %p8 (protected) is ignored; and
11949 # %p9 (alt char set) = alt char set.
11950 # The code to do this is:
11952 # %?%p1%p6%O IF (standout; bold) OR
11953 # %t;1 THEN OUTPUT ;1
11955 # %?%p2 IF underline
11956 # %t;4 THEN OUTPUT ;4
11959 # %t;5 THEN OUTPUT ;5
11961 # %?%p1%p3%O IF (standout; reverse) OR
11962 # %t;7 THEN OUTPUT ;7
11964 # %?%p7 IF invisible
11965 # %t;8 THEN OUTPUT ;8
11968 # %?%p9 IF altcharset
11969 # %t^N THEN OUTPUT ^N
11970 # %e^O ELSE OUTPUT ^O
11972 # sgr0: Everything is turned off (including alternate character set), since
11973 # there is no way of knowing what it is that the program wants turned
11975 # smul: The "underline" attribute is reconfigurable to an overline or
11976 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
11977 # bottom of the character cell. This was done to allow for more readable
11978 # underlined characters, and to be able to distinguish between an
11979 # underlined space, an underscore, and an underlined underscore.
11980 # xenl: Terminal can be configured to not need this, but this "glitch"
11981 # behavior is actually preferable with autowrap terminals.
11983 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
11984 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
11985 # string modifies the 'O' in kf43 to kf46 to a '$'.
11987 # kcbt was originally ^I but redefined in is2=.
11988 # kHOM was \E[H originally but redefined in is2=, as were a number of
11990 # kDC was originally \177 but redefined in is2=.
11992 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
11993 # tsl: Go to window 2, then do an hpa=.
11995 #------- flash=\E[8;3!}^G\E[3;3!}
11996 #------- flash=\E[?5h$<100>\E[?5l
11997 # There are two ways to flash the screen, both of which have their drawbacks.
11998 # The first is to set the bell mode to video, transmit a bell character, and
11999 # set the bell mode back - but to what? There is no way of knowing what the
12000 # user's old bell setting was before we messed with it. Worse, the command to
12001 # set the bell mode also sets the key click volume, and there is no way to say
12002 # "leave that alone", or to know what it's set to, either.
12003 # The second way to do a flash is to set the screen to inverse video, pad for a
12004 # tenth of a second, and set it back - but like before, there's no way to know
12005 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
12006 # it that way. The point is moot anyway, since vi (and probably other
12007 # programs) assume that by defining flash=, you want the computer to use it
12008 # INSTEAD of bel=, rather than as a secondary type of signal.
12010 #------- cvvis=\E[+{
12011 # The is the power on setting, which is also as visible as the cursor
12013 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
12014 # Windowing is possible, but not defined here because it is also used to
12015 # emulate status line functions. Allowing a program to set a window could
12016 # clobber the status line or render it unusable. There is additional memory,
12017 # but screen scroll functions are destructive and do not make use of it.
12019 #------- dim= Not available in power on mode.
12020 # You have a choice of defining low intensity characters as "half bright" and
12021 # high intensity as "normal", or defining low as "normal" and high as "bold".
12022 # No matter which you choose, only one of either "half bright" or "bold" is
12023 # available at any time, so taking the time to override the default is
12026 #------- prot=\E[=0;99m
12027 # Not defined, because it appears to have some strange side effects.
12028 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12029 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
12030 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
12031 # Available, but making them available to programs is inadvisable.
12032 # The code to do this is:
12033 # %?%p1%{24}%< IF ((key; 24) <;
12034 # %p1%{30}%> ((key; 30) >;
12035 # %p1%{54}%< (key; 54) <
12038 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
12039 # %t\E[ THEN OUTPUT \E[
12040 # %p1%d OUTPUT (key) as decimal
12041 # [next line applies to pfx only]
12045 # %p2%s OUTPUT (string) as string
12047 # [DEL chosen as delimiter, but could be any character]
12048 # [implied: ELSE do nothing]
12052 # Not defined since anything it might do could be done faster and easier with
12053 # either Meta-Shift-Reset or the main power switch.
12055 #------- smkx=\E[1!z
12056 #------- rmkx=\E[!z
12057 # These sequences apply to the cursor and setup keys only, not to the
12058 # numeric keypad. But it doesn't matter anyway, since making these
12059 # available to programs is inadvisable.
12060 # For the key definitions below, all sequences beginning with \E$ are
12061 # custom and programmed into the terminal via is2. \E$ also has no
12062 # meaning to any other terminal.
12064 #------- cmdch=\E[;%p1%d!t
12065 # Available, but making it available to programs is inadvisable.
12066 #------- smxon=\E[1*q
12067 # Available, but making it available to programs is inadvisable.
12068 # Terminal will send XON/XOFF on buffer overflow.
12069 #------- rmxon=\E[*q
12070 # Available, but making it available to programs is inadvisable.
12071 # Terminal will not notify on buffer overflow.
12072 #------- smm=\E[2+x
12074 # Available, but making them available to programs is inadvisable.
12077 # It's not made clear in the manuals, but based on other ansi/vt type
12078 # terminals, it's a good guess that this terminal is capable of both
12079 # "transparent print" (which doesn't copy data to the screen, and
12080 # therefore needs mc5i: specified to say so) and "auxilliary print"
12081 # (which does duplicate printed data on the screen, in which case mc4=
12082 # and mc5= should use the \E[?4i and \E[?5i strings instead).
12084 hds200|Human Designed Systems HDS200,
12085 am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
12086 cols#80, it#8, lines#24, lm#0,
12087 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12088 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
12089 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
12090 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12091 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12092 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12093 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12094 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
12095 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12096 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12098 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
12099 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
12100 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12101 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
12102 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
12103 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
12104 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
12105 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
12106 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
12107 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
12108 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
12109 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
12110 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
12111 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
12112 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
12113 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
12114 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
12115 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
12116 rmul=\E[m\017, sc=\E7,
12117 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12118 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
12119 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
12122 # <ht> through <el> included to specify padding needed in raw mode.
12123 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
12124 avt-ns|concept avt no status line,
12125 OTbs, am, eo, mir, ul, xenl, xon,
12126 cols#80, it#8, lines#24, lm#192,
12127 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12128 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
12129 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12130 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
12131 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12132 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
12133 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
12134 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
12135 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
12136 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
12137 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
12138 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12139 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12140 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
12141 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12142 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
12143 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12144 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
12145 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
12147 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
12148 sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
12149 smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
12150 tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
12151 avt-rv-ns|concept avt in reverse video mode/no status line,
12152 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12154 avt-w-ns|concept avt in 132 column mode/no status line,
12155 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12157 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
12158 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12159 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
12161 # Concept AVT with status line. We get the status line using the
12162 # "Background status line" feature of the terminal. We swipe the
12163 # first line of memory in window 2 for the status line, keeping
12164 # 191 lines of memory and 24 screen lines for regular use.
12165 # The first line is used instead of the last so that this works
12166 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
12167 # assumes an 8 page AVT but lm isn't currently used anywhere.)
12169 avt+s|concept avt status line changes,
12172 dsl=\E[0*w, fsl=\E[1;1!w,
12173 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
12174 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
12175 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
12176 avt|avt-s|concept-avt|avt w/80 columns,
12177 use=avt+s, use=avt-ns,
12178 avt-rv|avt-rv-s|avt reverse video w/sl,
12179 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
12180 use=avt+s, use=avt-ns,
12181 avt-w|avt-w-s|concept avt 132 cols+status,
12182 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
12183 use=avt+s, use=avt-ns,
12184 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
12185 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
12186 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
12188 #### Contel Business Systems.
12191 # Contel c300 and c320 terminals.
12192 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
12194 cols#80, lines#24, xmc#1,
12195 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12196 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
12197 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
12198 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
12199 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
12200 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
12201 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
12202 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
12203 # Contel c301 and c321 terminals.
12204 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
12205 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
12208 #### Data General (dg)
12210 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
12211 # the terminals group at Data General was shut down in 1991; all these
12212 # terminals have thus been discontinued.
12214 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
12215 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
12216 # sequentially, first the unmodified key codes are listed as F1 through F15.
12217 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
12218 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
12219 # F46 through F60. This is done in the private "includes" below whose names
12220 # start with "dgkeys+".
12222 # DG terminals generally support 8 bit characters. For each of these terminals
12223 # two descriptions are supplied:
12224 # 1) A default description for 8 bits/character communications, which
12225 # uses the default DG international character set and keyboard codes.
12226 # 2) A description with suffix "-7b" for 7 bits/character communications.
12227 # This description must use the NON-DEFAULT native keyboard language.
12229 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
12230 # Ctrl/Shift fdkeys (kf34-kf44).
12232 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
12233 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
12234 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
12235 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
12236 kf11=\233011z, kf12=\233012z, kf13=\233013z,
12237 kf14=\233014z, kf15=\233000z, kf16=\233101z,
12238 kf17=\233102z, kf18=\233103z, kf19=\233104z,
12239 kf2=\233002z, kf20=\233105z, kf21=\233106z,
12240 kf22=\233107z, kf23=\233108z, kf24=\233109z,
12241 kf25=\233110z, kf26=\233111z, kf27=\233112z,
12242 kf28=\233113z, kf29=\233114z, kf3=\233003z,
12243 kf30=\233100z, kf31=\233201z, kf32=\233202z,
12244 kf33=\233203z, kf34=\233204z, kf35=\233205z,
12245 kf36=\233206z, kf37=\233207z, kf38=\233208z,
12246 kf39=\233209z, kf4=\233004z, kf40=\233210z,
12247 kf41=\233211z, kf42=\233212z, kf43=\233213z,
12248 kf44=\233214z, kf45=\233200z, kf46=\233301z,
12249 kf47=\233302z, kf48=\233303z, kf49=\233304z,
12250 kf5=\233005z, kf50=\233305z, kf51=\233306z,
12251 kf52=\233307z, kf53=\233308z, kf54=\233309z,
12252 kf55=\233310z, kf56=\233311z, kf57=\233312z,
12253 kf58=\233313z, kf59=\233314z, kf6=\233006z,
12254 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
12255 khome=\233H, kprt=\233i,
12257 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
12258 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
12259 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12260 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
12261 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
12262 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
12263 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
12264 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
12265 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
12266 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
12267 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
12268 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
12269 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
12270 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
12271 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
12272 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
12273 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
12274 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
12275 kf9=\E[009z, khome=\E[H, kprt=\E[i,
12277 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
12278 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
12279 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
12280 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
12281 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
12282 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
12283 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
12284 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
12285 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
12286 kf8=^^x, kf9=^^y, khome=^H,
12288 dgkeys+15|Private entry describing 15 DG mode special keys,
12289 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
12290 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
12291 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
12292 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
12293 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
12294 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
12295 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
12296 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
12297 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
12298 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
12299 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
12302 # Data General color terminals use the "Tektronix" color model. The total
12303 # number of colors varies with the terminal model, as does support for
12304 # attributes used in conjunction with color.
12306 # Removed u7, u8 definitions since they conflict with tack:
12307 # Preserve user-defined colors in at least some cases.
12309 # Default is ACM mode.
12310 # u8=^^F}20^^Fi^^F}21,
12312 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
12314 colors#16, ncv#53, pairs#256,
12316 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12317 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12318 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12320 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
12323 # Video attributes are coordinated using static variables set by "sgr", then
12324 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
12325 # (D=dim, U=underline, B=blink, R=reverse.)
12326 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
12328 colors#8, ncv#16, pairs#64,
12329 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
12330 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12331 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12332 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12333 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12335 dg+color|Color info for Data General D470C terminals in ANSI mode,
12336 colors#16, ncv#53, pairs#256,
12337 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12338 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12339 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12340 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
12343 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
12345 colors#8, ncv#16, pairs#64,
12347 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12348 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
12349 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
12351 dgmode+color|Color info for Data General D470C terminals in DG mode,
12352 colors#16, pairs#256,
12353 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12354 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
12357 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
12359 colors#52, ncv#53, pairs#26,
12360 initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
12361 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
12362 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
12363 scp=\036RG2%p1%02X,
12365 # Colors are in the order: normal, reverse, dim, dim + reverse.
12366 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
12368 colors#52, ncv#53, pairs#26,
12369 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
12370 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
12371 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
12372 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
12374 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
12375 # Initialization string 1 sets:
12376 # ^R - vertical scrolling enabled
12377 # ^C - blinking enabled
12378 dg-generic|Generic Data General terminal in DG mode,
12381 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12382 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
12383 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
12384 smul=^T, use=dgkeys+11,
12386 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
12387 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
12388 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
12389 # maybe they were originally nuls (which would fit).
12391 dg200|data general dasher 200,
12394 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
12395 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
12396 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
12397 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
12398 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
12401 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
12402 dg210|dg-ansi|Data General 210/211,
12405 OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
12406 cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
12407 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12408 nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
12410 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
12411 # courtesy of Carlos Rucalde of Vantage Software, Inc.
12412 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
12413 # I suspect the d200 function keys actually work on the dg211, check it out.)
12414 dg211|Data General d211,
12415 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
12416 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
12417 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
12419 # dg450 from Cornell (not official)
12420 dg450|dg6134|data general 6134,
12421 cub1@, cuf1=^X, use=dg200,
12424 # Note: lesser Dasher terminals will not work with vi because vi insists upon
12425 # having a command to move straight down from any position on the bottom line
12426 # and scroll the screen up, or a direct vertical scroll command. The 460 and
12427 # above have both, the D210/211, for instance, has neither. We must use ANSI
12428 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
12429 # backspace on all terminals. This is not so in DG mode.
12430 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
12431 # grounds that there is no matching ":ml:"
12432 # fixed garbled ":k9=\E[00\:z:" capability -- esr)
12433 dg460-ansi|Data General Dasher 460 in ANSI-mode,
12434 OTbs, am, msgr, ul,
12435 cols#80, it#8, lines#24,
12436 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
12437 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
12438 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
12439 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
12440 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12441 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
12442 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
12443 kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
12444 lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
12445 ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
12447 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
12448 # Data General 605x
12449 # Ought to work for a Model 6242, Type D210 as well as a 605x.
12450 # Note that the cursor-down key transmits ^Z. Job control users, beware!
12451 # This also matches a posted description of something called a `Dasher 100'
12452 # so there's a dg100 alias here.
12453 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
12454 dg6053-old|dg100|data general 6053,
12457 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
12458 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
12459 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
12460 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
12461 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
12462 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
12465 # (Some performance can be gained over the generic DG terminal type)
12466 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
12468 home=^P\0\0, ll=^P\0^W, use=dg-generic,
12470 # Like 6053, but adds reverse video and more keypad and function keys.
12471 d200|d200-dg|Data General DASHER D200,
12472 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
12473 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
12474 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
12477 # DASHER D210 series terminals in ANSI mode.
12478 # Reverse video, no insert/delete character/line, 7 bits/character only.
12480 # Initialization string 1 sets:
12481 # <0 - scrolling enabled
12482 # <1 - blink enabled
12483 # <4 - print characters regardless of attributes
12484 d210|d214|Data General DASHER D210 series,
12487 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
12488 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12489 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12490 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
12491 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
12492 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12493 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
12494 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
12496 # DASHER D210 series terminals in DG mode.
12497 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
12498 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
12500 ed=^^FF, use=d200-dg,
12502 # DASHER D211 series terminals in ANSI mode.
12503 # Like the D210, but with 8-bit characters and local printer support.
12505 # Initialization string 2 sets:
12507 # 2;1 - 8 bit operations
12508 # 1;1 - 8 bit (international) keyboard language
12509 # \E(B - default primary character set (U.S. ASCII)
12510 # \E)4 - default secondary character set (international)
12511 # ^O - primary character set
12513 d211|d215|Data General DASHER D211 series,
12515 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
12518 # Initialization string 2 sets:
12520 # 2;0 - 7 bit operations
12521 # 1;0 - 7 bit (native) keyboard language
12522 # \E(0 - default character set (the keyboard native language)
12523 # ^O - primary character set
12524 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
12526 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
12528 # Like the D210 series, but adds support for 8-bit characters.
12530 # Reset string 2 sets:
12531 # ^^N - secondary character set
12532 # ^^FS0> - 8 bit international character set
12533 # ^^O - primary character set
12534 # ^^FS00 - default character set (matching the native keyboard language)
12536 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
12538 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
12540 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
12543 # Enhanced DG mode with changes to be more UNIX compatible.
12544 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
12547 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
12548 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
12549 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
12550 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
12551 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
12552 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
12553 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
12554 rs2=\036N\036FS0E\036O\036FS00,
12555 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12556 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
12557 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
12558 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
12560 is3=\036Fz2, use=d216+,
12562 d217-unix|Data General DASHER D217 in DG-UNIX mode,
12564 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
12567 # DASHER D220 color terminal in ANSI mode.
12568 # Like the D470C but with fewer colors and screen editing features.
12570 # Initialization string 1 sets:
12572 # <0 - scrolling enabled
12573 # <1 - blink enabled
12574 # <4 - print characters regardless of attributes
12575 # \E[m - all attributes off
12576 # Reset string 1 sets:
12577 # \Ec - initial mode defaults (RIS)
12579 d220|Data General DASHER D220,
12581 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12582 use=dg+color8, use=d470c,
12584 d220-7b|Data General DASHER D220 in 7 bit mode,
12586 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
12587 use=dg+color8, use=d470c-7b,
12589 # Initialization string 3 sets:
12590 # - default cursor (solid rectangle)
12591 # Reset string 2 sets:
12592 # ^^N - secondary character set
12593 # ^^FS0> - 8 bit international character set
12594 # ^^O - primary character set
12595 # ^^FS00 - default character set (matching the native keyboard language)
12597 d220-dg|Data General DASHER D220 color terminal in DG mode,
12599 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
12600 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
12603 # DASHER D230C color terminal in ANSI mode.
12604 # Like the D220 but with minor ANSI compatibility improvements.
12606 d230c|d230|Data General DASHER D230C,
12607 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
12608 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
12609 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12610 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
12611 smul=\E[4;50m, use=dgkeys+7b, use=d220,
12613 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
12616 # DASHER D400/D450 series terminals.
12617 # These add intelligent features like insert/delete to the D200 series.
12619 # Initialization string 2 sets:
12620 # ^^FQ2 - default cursor (solid rectangle)
12621 # ^^FW - character protection disabled
12622 # ^^FJ - normal (80 column) mode
12623 # ^^F\^ - horizontal scrolling enabled (for alignment)
12624 # ^^FX004? - margins at columns 0 and 79
12625 # ^^F] - horizontal scrolling disabled
12626 # ^^O - primary character set
12627 # ^^FS00 - default character set (the keyboard native language)
12628 # - (should reset scrolling regions, but that glitches the screen)
12629 # Reset string 1 sets:
12630 # ^^FA - all terminal defaults except scroll rate
12631 # Reset string 2 sets:
12632 # ^^F] - horizontal scrolling disabled
12633 # ^^FT0 - jump scrolling
12635 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
12637 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
12638 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
12639 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
12640 ich1=^^J, il1=^^FH,
12641 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
12642 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
12643 rs1=^^FA, rs2=\036F]\036FT0,
12644 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
12645 sgr0=\017\025\035\036E\036O, smacs=^^N,
12646 vpa=\020\177%p1%c, use=d210-dg,
12648 # DASHER D410/D460 series terminals in ANSI mode.
12649 # These add a large number of intelligent terminal features.
12651 # Initialization string 1 sets:
12653 # <0 - scrolling enabled
12654 # <1 - blink enabled
12655 # <2 - horizontal scrolling enabled (for alignment)
12656 # <4 - print characters regardless of attributes
12657 # \E[5;0v - normal (80 column) mode
12658 # \E[1;1;80w - margins at columns 1 and 80
12660 # 1 - print all characters even if protected
12661 # 6 - character protection disabled
12662 # <2 - horizontal scrolling disabled
12663 # - (should reset scrolling regions, but that glitches the screen)
12665 # Initialization string 2 sets:
12667 # 3;2 - default cursor (solid rectangle)
12668 # 2;1 - 8 bit operations
12669 # 1;1 - international keyboard language
12670 # \E(B - default primary character set (U.S. ASCII)
12671 # \E)4 - default secondary character set (international)
12672 # ^O - primary character set
12674 # Reset string 1 sets:
12675 # \Ec - initial mode defaults (RIS)
12676 # \E[<2h - horizontal scrolling disabled
12678 # Reset string 2 sets:
12680 # 4;0 - jump scrolling
12681 # 2;1 - 8 bit operations
12682 # 1;1 - 8 bit (international) keyboard language
12683 # \E(B - default primary character set (U.S. ASCII)
12684 # \E)4 - default secondary character set (international)
12686 d410|d411|d460|d461|Data General DASHER D410/D460 series,
12688 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
12689 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12690 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
12691 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
12692 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
12693 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
12694 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
12695 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
12696 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
12698 # Initialization string 2 sets:
12700 # 3;2 - default cursor (solid rectangle)
12701 # 2;0 - 7 bit operations
12702 # 1;0 - 7 bit (native) keyboard language
12703 # \E(0 - default character set (the keyboard native language)
12704 # ^O - primary character set
12706 # Reset string 2 sets:
12708 # 4;0 - jump scrolling
12709 # 2;0 - 7 bit operations
12710 # 1;0 - 7 bit (native) keyboard language
12711 # \E(0 - default character set (the keyboard native language)
12713 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
12715 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
12716 rs2=\E[4;0;2;0;1;0v\E(0,
12717 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
12718 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
12720 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
12722 enacs@, rmacs=\036FS00,
12723 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
12724 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
12727 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
12729 # Initialization string 1 sets:
12731 # <0 - scrolling enabled
12732 # <1 - blink enabled
12733 # <2 - horizontal scrolling enabled (for alignment)
12734 # <4 - print characters regardless of attributes
12735 # \E[5;1v - compressed (135 column) mode
12736 # \E[1;1;126 - margins at columns 1 and 126
12738 # 1 - print all characters even if protected
12739 # 6 - character protection disabled
12740 # <2 - horizontal scrolling disabled
12741 # - (should reset scrolling regions, but that glitches the screen)
12743 # Reset string 1 sets:
12744 # \Ec - initial mode defaults (RIS)
12745 # \E[5;1v - compressed (135 column) mode
12746 # \E[1;1;126w - margins at columns 1 and 126
12747 # \E[<2h - horizontal scrolling disabled
12749 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
12751 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12752 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
12754 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
12756 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
12757 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
12759 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
12762 # These add intelligent features like scrolling regions.
12763 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
12764 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
12765 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
12766 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
12767 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
12768 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
12769 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
12770 vpa=\036FPFF%p1%2.2X,
12771 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12773 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
12775 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
12776 rs2=\036P@1\036FK\036FX0083,
12777 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
12779 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
12782 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
12784 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
12786 clear=\036FG\036PH, fsl=\036F}01\022,
12787 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
12788 tsl=\036F}00\036FP%p1%2.2X18\036PG,
12789 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
12792 # Relative cursor motions are confined to the current window,
12793 # which is not what the scrolling region specification expects.
12794 # Thus, relative vertical cursor positioning must be deleted.
12795 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
12796 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
12797 cud1@, cuu1@, ll@, use=d462+,
12799 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
12801 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
12803 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
12805 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
12807 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
12810 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
12812 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
12814 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
12816 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
12818 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
12821 d430c-dg|d430-dg|Data General D430C in DG mode,
12822 use=d413-dg, use=dg+fixed,
12823 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
12824 use=d413-dg, use=dg+ccc,
12826 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
12827 use=d413-unix, use=dgunix+fixed,
12828 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
12829 use=d413-unix-w, use=dgunix+fixed,
12830 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
12831 use=d413-unix-25, use=dgunix+fixed,
12832 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
12833 use=d413-unix-s, use=dgunix+fixed,
12834 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
12835 use=d413-unix-sr, use=dgunix+fixed,
12836 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
12837 use=d413-unix, use=dgunix+ccc,
12838 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
12839 use=d413-unix-w, use=dgunix+ccc,
12840 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
12841 use=d413-unix-25, use=dgunix+ccc,
12842 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
12843 use=d413-unix-s, use=dgunix+ccc,
12844 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
12845 use=d413-unix-sr, use=dgunix+ccc,
12847 # DASHER D470C color terminal in ANSI mode.
12848 # Like the D460 but with 16 colors and without a compressed mode.
12850 # Initialization string 1 sets:
12852 # <0 - scrolling enabled
12853 # <1 - blink enabled
12854 # <2 - horizontal scrolling enabled (for alignment)
12855 # <4 - print characters regardless of attributes
12856 # \E[1;1;80w - margins at columns 1 and 80
12858 # 1 - print all characters even if protected
12859 # 6 - character protection disabled
12860 # <2 - horizontal scrolling disabled
12861 # - (should reset scrolling regions, but that glitches the screen)
12863 d470c|d470|Data General DASHER D470C,
12864 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
12865 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
12866 use=dg+color, use=d460,
12868 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
12869 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
12870 sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
12871 use=dg+color, use=d460-7b,
12873 # Initialization string 2 sets:
12874 # ^^FQ2 - default cursor (solid rectangle)
12875 # ^^FW - character protection disabled
12876 # ^^F\^ - horizontal scrolling enabled (for alignment)
12877 # ^^FX004? - margins at columns 0 and 79
12878 # ^^F] - horizontal scrolling disabled
12879 # ^^O - primary character set
12880 # ^^FS00 - default character set (the keyboard native language)
12881 # - (should reset scrolling regions, but that glitches the screen)
12883 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
12884 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
12885 use=dgmode+color, use=d460-dg,
12887 # DASHER D555 terminal in ANSI mode.
12888 # Like a D411, but has an integrated phone.
12889 d555|Data General DASHER D555,
12891 d555-7b|Data General DASHER D555 in 7-bit mode,
12893 d555-w|Data General DASHER D555 in wide mode,
12895 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
12897 d555-dg|Data General DASHER D555 series in DG mode,
12900 # DASHER D577 terminal in ANSI mode.
12901 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
12902 d577|Data General DASHER D577,
12904 d577-7b|Data General DASHER D577 in 7-bit mode,
12906 d577-w|Data General DASHER D577 in wide mode,
12908 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
12911 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
12914 # DASHER D578 terminal.
12915 # Like a D577, but without compressed mode; like a D470C in this respect.
12917 # Initialization string 1 sets:
12919 # <0 - scrolling enabled
12920 # <1 - blink enabled
12921 # <2 - horizontal scrolling enabled (for alignment)
12922 # <4 - print characters regardless of attributes
12923 # \E[1;1;80w - margins at columns 1 and 80
12925 # 1 - print all characters even if protected
12926 # 6 - character protection disabled
12927 # <2 - horizontal scrolling disabled
12928 # - (should reset scrolling regions, but that glitches the screen)
12930 d578|Data General DASHER D578,
12931 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
12932 d578-7b|Data General DASHER D578 in 7-bit mode,
12933 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
12935 #### Datamedia (dm)
12937 # Datamedia was headquartered in Nashua, New Hampshire until it went
12938 # out of business in 1993, but the ID plates on the terminals referred
12939 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
12940 # manufacturer which threw out all information about the terminals.
12943 cs10|colorscan|Datamedia Color Scan 10,
12946 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
12947 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
12948 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12949 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
12950 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12951 cs10-w|Datamedia Color Scan 10 with 132 columns,
12953 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
12955 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
12956 dm1520|dm1521|datamedia 1520,
12958 cols#80, it#8, lines#24,
12959 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
12960 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
12961 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
12963 # dm2500: this terminal has both <ich> and <smir>. Applications using
12964 # termcap/terminfo directly (rather than through ncurses) might be confused.
12965 dm2500|datamedia2500|datamedia 2500,
12968 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
12969 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
12970 dch1=\020\010\030\035$<10*>,
12971 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
12972 ich1=\020\034\030\035$<10*>,
12973 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
12974 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
12975 smdc=^P, smir=^P, smso=^N,
12976 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
12977 # also, has a meta-key.
12978 # From: <goldberger@su-csli.arpa>
12979 # (dmchat: ":MT:" changed to ":km:" -- esr)
12980 dmchat|dmchat version of datamedia 2500,
12982 dl1=\020\032\030\035$<2/>,
12983 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
12984 # (dm3025: ":MT:" changed to ":km:" -- esr)
12985 dm3025|datamedia 3025a,
12987 cols#80, it#8, lines#24,
12988 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12989 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
12990 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
12991 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
12992 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
12993 smir=\EP, smso=\EO1,
12994 dm3045|datamedia 3045a,
12995 OTbs, am, eo, km@, ul, xenl,
12996 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
12997 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
12998 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
12999 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
13001 # Datamedia DT80 soft switches:
13002 # 1 0=Jump 1=Smooth
13003 # Autorepeat 0=off 1=on
13004 # Screen 0=Dark 1=light
13005 # Cursor 0=u/l 1=block
13007 # 2 Margin Bell 0=off 1=on
13008 # Keyclick 0=off 1=on
13009 # Ansi/VT52 0=VT52 1=Ansi
13010 # Xon/Xoff 0=Off 1=On
13012 # 3 Shift3 0=Hash 1=UK Pound
13014 # Newline 0=Off 1=On
13015 # Interlace 0=Off 1=On
13017 # 4 Parity 0=Odd 1=Even
13018 # Parity 0=Off 1=On
13019 # Bits/Char 0=7 1=8
13020 # Power 0=60Hz 1=50Hz
13022 # 5 Line Interface 0=EIA 1=Loop
13023 # Aux Interface 0=EIA 1=Loop
13024 # Local Copy 0=Off 1=On
13027 # 6 Aux Parity 0=Odd 1=Even
13028 # Aux Parity 0=Off 1=On
13029 # Aux Bits/Char 0=7 1=8
13030 # CRT Saver 0=Off 1=On
13031 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
13032 dm80|dmdt80|dt80|datamedia dt80/1,
13033 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
13034 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
13035 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
13036 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
13038 # except in 132 column mode, where it needs a little padding.
13039 # This is still less padding than the vt100, and you can always turn on
13040 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
13042 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
13044 clear=\E[H\E[2J$<50/>, cud1=^J,
13045 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
13046 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
13047 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
13048 dt80-sas|Datamedia DT803/DTX for SAS usage,
13051 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
13052 bel=^G, clear=^L, cr=^M,
13053 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
13054 cub1=^H, cud1=\EB, cuf1=^\,
13055 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
13056 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
13057 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
13058 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
13059 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
13060 smso=\E$2\004, tbc=\E'0,
13062 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
13063 # These aren't end-all Excel termcaps; but do insert/delete char/line
13064 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
13065 # The naming convention has been bent somewhat, with the use of E? (where
13066 # E is for 'Excel') as # a name. This was done to distinguish the entries
13067 # from the other Datamedias in use here, and yet to associate a model of
13068 # the Excel terminals with the regular datamedia terminals that share
13069 # major characteristics.
13070 excel62|excel64|datamedia Excel 62,
13071 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13072 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13074 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
13075 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
13076 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
13078 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
13079 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
13080 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
13081 smir=\E[4h, use=dt80,
13085 # Falco Data Products
13086 # 440 Potrero Avenue
13087 # Sunnyvale, CA 940864-196
13088 # Vox: (800)-325-2648
13089 # Fax: (408)-745-7860
13090 # Net: techsup@charm.sys.falco.com
13092 # Current Falco models as of 1995 are generally ANSI-compatible and support
13093 # emulations of DEC VT-series, Wyse, and Televideo types.
13096 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
13097 # This terminal was released around 1983 and was discontinued long ago.
13098 # The standout and underline highlights are the same.
13099 falco|ts1|ts-1|falco ts-1,
13101 cols#80, it#8, lines#24,
13102 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13103 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13104 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
13105 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13106 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
13107 smir=\Eq, smso=\Eg1, smul=\Eg1,
13108 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
13109 OTbs, am, da, db, mir, msgr, ul,
13110 cols#80, it#8, lines#24,
13111 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
13112 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
13113 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
13114 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
13115 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
13116 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
13117 smso=\Eg4, smul=\Eg1,
13118 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
13119 ts100|ts100-sp|falco ts100-sp,
13120 am, mir, msgr, xenl, xon,
13121 cols#80, it#8, lines#24, vt#3,
13122 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13123 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13124 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13125 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13126 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13127 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13128 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
13129 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
13130 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
13131 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13132 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13133 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13134 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13135 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
13136 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13137 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
13139 ts100-ctxt|falco ts-100 saving context,
13140 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
13142 #### Florida Computer Graphics
13145 # Florida Computer Graphics Beacon System, using terminal emulator program
13146 # "host.com", as provided by FCG. This description is for an early release
13147 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
13150 # From: David Bryant <cbosg!djb> 1/7/83
13151 beacon|FCG Beacon System,
13154 bel=\ESTART\r\E37\r\EEND\r$<1>,
13155 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
13156 cub1=^H, cud1=^J, cuf1=\EV,
13157 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
13158 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
13159 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
13160 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
13161 rmul=\ESTART\r\E60\,0\r\EEND\r,
13162 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
13163 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
13164 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
13165 smul=\ESTART\r\E60\,1\r\EEND\r,
13170 # The f1720a differences from ANSI: no auto margin, destructive
13171 # tabs, # of lines, funny highlighting and underlining
13172 f1720|f1720a|fluke 1720A,
13174 cols#80, lines#16, xmc#1,
13175 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
13176 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
13177 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
13178 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13179 smso=\E[7m, smul=\E[4m,
13181 #### Liberty Electronics (Freedom)
13183 # Liberty Electronics
13184 # 48089 Fremont Blvd
13186 # Vox: (510)-623-6000
13187 # Fax: (510)-623-7021
13189 # From: <faletti@berkeley.edu>
13190 # (f100: added empty <acsc> to suppress a tic warning;
13191 # made this relative to adm+sgr -- note that <invis> isn't
13192 # known to work for f100 but does on the f110. --esr)
13193 f100|freedom|freedom100|freedom model 100,
13194 OTbs, am, bw, hs, mir, msgr, xon,
13196 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
13197 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13198 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
13199 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
13200 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
13201 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
13202 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
13203 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13204 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
13205 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
13206 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13207 f100-rv|freedom-rv|freedom 100 in reverse video,
13208 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
13209 # The f110 and f200 have problems with vi(1). They use the ^V
13210 # code for the down cursor key. When kcud1 is defined in terminfo
13211 # as ^V, the Control Character Quoting capability (^V in insert mode)
13212 # is lost! It cannot be remapped in vi because it is necessary to enter
13213 # a ^V to to quote the ^V that is being remapped!!!
13215 # f110/f200 users will have to decide whether
13216 # to lose the down cursor key or the quoting capability. We will opt
13217 # initially for leaving the quoting capability out, since use of VI
13218 # is not generally applicable to most interactive applications
13219 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
13220 f110|freedom110|Liberty Freedom 110,
13223 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
13224 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
13225 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
13226 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13227 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
13228 smso=\EG<, tsl=\Ef, use=f100,
13229 f110-14|Liberty Freedom 110 14inch,
13231 f110-w|Liberty Freedom 110 - 132 cols,
13232 cols#132, use=f110,
13233 f110-14w|Liberty Freedom 110 14in/132 cols,
13236 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
13237 f200|freedom200|Liberty Freedom 200,
13238 OTbs, am, eslok, hs, mir, msgr, xon,
13239 cols#80, it#8, lines#24, wsl#80,
13240 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
13241 clear=^Z, cnorm=\E.1, cr=^M,
13242 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
13243 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13244 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
13245 flash=\Eo$<200/>\En, fsl=^M, home=^^,
13246 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
13247 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
13248 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
13249 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
13250 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
13251 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
13252 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
13253 f200-w|Liberty Freedom 200 - 132 cols,
13254 cols#132, use=f200,
13255 # The f200 has the ability to reprogram the down cursor key. The key is
13256 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
13257 # so powering the terminal off and on will not cause the change to be lost.
13258 f200vi|Liberty Freedom 200 for vi,
13259 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
13260 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
13261 cols#132, use=f200vi,
13265 # Graphon Corporation
13266 # 544 Division Street
13267 # Campbell, CA 95008
13268 # Vox: (408)-370-4080
13269 # Fax: (408)-370-5047
13270 # Net: troy@graphon.com (Troy Morrison)
13273 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
13274 # including one odd hybrid that starts out life on power-up as a character
13275 # terminal, than can be switched to X graphics mode (driven over the serial
13276 # line) by an escape sequence. No info on this beast yet.
13277 # (go140: I added <rmam>/<smam> based on the init string -- esr)
13278 go140|graphon go-140,
13280 cols#80, it#8, lines#24,
13281 clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
13282 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13283 ed=\E[J$<10/>, el=\E[K, ht=^I,
13284 if=/usr/share/tabset/vt100, il1=\E[L,
13285 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13286 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
13287 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
13288 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
13289 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
13290 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
13291 go140w|graphon go-140 in 132 column mode,
13294 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
13296 # Hacked up vt200 termcap to handle GO-225/VT220
13297 # From: <edm@nwnexus.WA.COM>
13298 # (go225: I added <rmam>/<smam> based on the init string -- esr)
13299 go225|go-225|Graphon 225,
13300 OTbs, am, mir, xenl,
13301 cols#80, it#8, lines#25, vt#3,
13302 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
13303 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
13304 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
13305 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
13306 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
13307 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
13308 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
13309 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
13310 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
13311 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
13312 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
13313 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
13315 #### Harris (Beehive)
13317 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
13318 # Their terminal group is ancient history now (1995) though the parent
13319 # company is still in business.
13322 # Beehive documentation is undated and marked Preliminary and has no figures
13323 # so we must have early Superbee2 (Model 600, according to phone conversation
13324 # with mfr.). It has proved reliable except for some missing padding
13325 # (notably after \EK and <nl> at bottom of screen).
13327 # The key idea is that AEP mode is poison for <cup> & that US's in
13328 # the local memory should be avoided like the plague. That means
13329 # that the 2048 character local buffer is used as 25 lines of 80
13330 # characters, period. No scrolling local memory, folks. It also
13331 # appears that we cannot use naked INS LINE feature since it uses
13332 # US. The sbi fakes <il1> with an 80-space insert that may be too
13333 # slow at low speeds; also spaces get converted to \040 which is
13334 # too long for some programs (not vi). DEL LINE is ok but slow.
13336 # The <nl> string is designed for last line of screen ONLY; cup to
13337 # 25th line corrects the motion inherent in scrolling to Page 1.
13339 # There is one understood bug. It is that the screen appears to
13340 # pop to a new (blank) page after a <nel>, or leave a half-line
13341 # ellipsis to a quad that is the extra 48 memory locations. The
13342 # data received is dumped into memory but not displayed. Not to
13343 # worry if <cup> is being used; the lines not displayed will be,
13344 # whenever the cursor is moved up there. Since <cup> is addressed
13345 # relative to MEMORY of window, nothing is lost; but beware of
13346 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
13347 # therefore, is setenv MORE -c .
13349 # WARNING: Not all features tested.
13351 # Timings are assembled from 3 sources. Some timings may reflect
13352 # SB2/Model 300 that were used if more conservative.
13353 # Tested on a Model 600 at 1200 and 9600 bd.
13355 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
13356 # placed on the keyboard and useless because of AEP, is made
13357 # into a backspace key. In use ESC must be pressed twice (to send)
13358 # and sending ^C must be prefixed by ESC to avoid that weird
13359 # transmit mode associated with ENTER key.
13361 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
13362 # the screen, then it has dropped into ENTER mode; hit
13363 # RESET--ONLINE--!tset.
13365 # As delivered this machine has a FATAL feature that will throw
13366 # it into that strange transmit state (SPOW) if the space bar is
13367 # hit after a CR is received, but before receiving a LF (or a
13370 # The circuits MUST be modified to eliminate the SPOW latch.
13371 # This is done by strapping on chip A46 of the I/O board; cut
13372 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
13373 # chip. This mod has been checked out on a Mod 600 of Superbee II.
13374 # With this modification absurdly high timings on cr are
13377 # NOTE WELL that the rear panel switch should be set to CR/LF,
13380 sb1|beehive superbee,
13381 OTbs, am, bw, da, db, mir, ul, xsb,
13382 cols#80, lines#25, xmc#1,
13383 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
13384 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
13385 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
13386 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
13387 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
13388 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
13389 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
13390 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
13391 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
13392 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
13393 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
13394 smso=\E_1, smul=\E_0, tbc=\E3,
13395 sbi|superbee|beehive superbee at Indiana U.,
13397 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
13399 # Alternate (older) description of Superbee - f1=escape, f2=^C.
13400 # Note: there are at least 3 kinds of superbees in the world. The sb1
13401 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
13402 # The sb3 puts garbage on the bottom of the screen when you scroll with
13403 # the switch in the back set to CRLF instead of AEP. This description
13404 # is tested on the sb2 but should work on all with either switch setting.
13405 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
13406 # the other two if you want to try to hit that tiny escape key.
13407 # This description is tricky: being able to use cup depends on there being
13408 # 2048 bytes of memory and the hairy <nl> string.
13409 superbee-xsb|beehive super bee,
13411 cols#80, it#8, lines#25,
13412 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
13413 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
13414 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
13415 home=\EH, ht=^I, hts=\E1,
13416 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
13417 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
13418 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
13419 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
13420 # This loses on lines > 80 chars long, use at your own risk
13421 superbeeic|super bee with insert char,
13422 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
13423 sb2|sb3|fixed superbee,
13424 xsb@, use=superbee,
13426 #### Beehive Medical Electronics
13428 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
13429 # Regarding your question though; Beehive terminals weren't made by Harris.
13430 # They were made by Beehive Medical Electronics in Utah. They went out of
13431 # business in the early '80s.
13433 # (OK, then, I don't know why a couple of these say "harris beehive".)
13436 # Reports are that most of these Beehive entries (except superbee) have not
13437 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
13439 # (bee: <ich1> was empty, which is obviously bogus -- esr)
13440 beehive|bee|harris beehive,
13443 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
13444 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
13445 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
13446 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13447 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
13448 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
13449 smir=\EQ, smso=\EdP, smul=\Ed`,
13450 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
13451 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
13452 # look at those spaces in <rmso>/<smso>. Seems strange to me...
13453 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
13454 # really care, cook up one using ^F -- esr)
13455 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
13457 cols#80, it#8, lines#20,
13458 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
13459 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
13460 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
13461 beehive4|bh4|beehive 4,
13464 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
13465 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
13466 # There was an early Australian kit-built computer called a "Microbee".
13467 # It's not clear whether this is for one of those or for a relative
13469 microb|microbee|micro bee series,
13471 cols#80, it#8, lines#24,
13472 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13473 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13474 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
13475 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
13476 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
13477 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
13479 # 8675, 8686, and bee from Cyrus Rahman
13480 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
13481 ha8675|harris 8675,
13482 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
13483 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
13484 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
13485 kf8=\177, kf9=\Ee, use=bee,
13486 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
13488 ha8686|harris 8686,
13489 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
13490 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
13491 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
13492 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
13493 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
13498 # Hazeltine appears to be out of the terminal business as of 1995. These
13499 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
13500 # Harris. They have a hazeltine.com domain (but no web page there ) and can
13504 # 450 East Pulaski Road
13505 # Greenlawn, New York 11740
13507 # As late as 1993, manuals for the terminal product line could still be
13510 # TRW Customer Service Division
13513 # Fairfield, NJ 07007-2078
13515 # They're now (1998) a subsidiary of General Electric, operating under the
13516 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
13517 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
13520 # Since <cuf1> is blank, when you want to erase something you
13521 # are out of luck. You will have to do ^L's a lot to
13522 # redraw the screen. h1000 is untested. It doesn't work in
13523 # vi - this terminal is too dumb for even vi. (The code is
13524 # there but it isn't debugged for this case.)
13525 hz1000|hazeltine 1000,
13528 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
13530 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
13531 hz1420|hazeltine 1420,
13534 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
13535 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
13536 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
13538 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
13539 # freakout with out-of-range args and tn3270. No hz since it needs to
13541 hz1500|hazeltine 1500,
13544 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13545 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
13546 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
13547 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
13548 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
13549 # h1510 assumed to be in sane escape mode. Else use h1500.
13550 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
13551 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
13552 # removed incorrect and overridden ":do=^J:" -- esr)
13553 hz1510|hazeltine 1510,
13556 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
13557 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
13558 el=\E^O, il1=\E^Z, ind=^J,
13560 # The following switch settings are assumed for normal operation:
13561 # FULL CR U/L_CASE ESCAPE
13562 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
13563 # Other switches may be set for operator convenience or communication
13565 hz1520|Hazeltine 1520,
13566 OTbs, am, bw, msgr,
13568 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
13569 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13570 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
13571 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
13572 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
13573 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
13574 # This version works with the escape switch off
13575 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
13576 hz1520-noesc|hazeltine 1520,
13579 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13580 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
13581 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
13582 # Note: the h1552 appears to be the first Hazeltine terminal which
13583 # is not braindamaged. It has tildes and backprimes and everything!
13584 # Be sure the auto lf/cr switch is set to cr.
13585 hz1552|hazeltine 1552,
13587 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
13588 lf2=red, lf3=green, use=vt52,
13589 hz1552-rv|hazeltine 1552 reverse video,
13590 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
13591 # Note: h2000 won't work well because of a clash between upper case and ~'s.
13592 hz2000|hazeltine 2000,
13595 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
13596 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
13597 il1=~\032$<6>, ind=^J, pad=\177,
13598 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
13599 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
13600 # to work ok. There is one problem though if one types a lot of garbage
13601 # characters very fast vi seems not able to keep up and hangs while trying
13602 # to insert. That's in insert mode while trying to insert in the middle of
13603 # a line. It might be because the Esprit doesn't have insert char and delete
13604 # char as a built in function. Vi has to delete to end of line and then
13605 # redraw the rest of the line.
13606 esprit|Hazeltine Esprit I,
13609 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
13610 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
13611 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
13612 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
13613 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
13614 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
13615 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
13616 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
13617 esprit-am|hazeltine esprit auto-margin,
13619 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
13620 # Vi it seems always wants to send a control J for "do" and it turned out
13621 # that the terminal would work somewhat if the auto LF/CR was turned off.
13622 # (hmod1: removed :dn=~^K: -- esr)
13623 hmod1|Hazeltine Modular 1,
13626 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
13627 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
13628 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
13629 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
13631 # Hazeltine Executive 80 Model 30 (1554?)
13632 # from Will Martin <control@ALMSA-1.ARPA> via BRL
13633 # Like VT100, except for different "am" behavior.
13634 hazel|exec80|h80|he80|Hazeltine Executive 80,
13636 cols#80, it#8, lines#24, vt#3,
13637 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
13638 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13639 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
13640 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
13641 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
13642 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
13643 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13644 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
13645 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
13646 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
13647 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13648 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
13654 ibm327x|line mode IBM 3270 style,
13656 clear=^M^J, el=^M, home=^M,
13658 ibm3101|i3101|IBM 3101-10,
13661 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13662 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
13663 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
13664 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
13665 ibm3151|IBM 3151 display,
13666 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
13667 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
13668 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
13669 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
13670 # removed kend, knp, kpp -TD
13671 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
13672 OTbs, am, mir, msgr,
13673 cols#80, it#8, lines#24,
13674 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
13675 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
13676 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13677 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
13678 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
13679 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
13680 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
13681 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
13682 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
13683 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
13684 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
13685 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
13686 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
13687 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
13688 rmso=\E4@, rmul=\E4@,
13689 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
13690 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
13692 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
13693 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
13694 ibm3162|IBM 3162 display,
13695 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
13696 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
13699 # This really should not use setab/setaf, but it is clear that the
13700 # original terminfo does not toggle red/blue colors as in setb/setf.
13701 ibm3164|i3164|IBM 3164,
13703 colors#8, pairs#64,
13704 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
13705 setab=\E4 %p1%{64}%+%c,
13706 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
13707 smcup=\E!9/N\E>B, use=ibm3161,
13709 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
13711 cols#80, it#8, lines#25,
13712 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13713 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13714 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13715 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13716 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
13717 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
13718 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
13719 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
13720 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13721 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
13722 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
13723 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
13724 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
13725 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
13726 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
13727 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
13728 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
13729 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
13730 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13731 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
13732 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
13733 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
13734 rmso=\E[m, rmul=\E[m, rs2=\Ec,
13735 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
13736 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13738 ibmaed|IBM Experimental display,
13739 OTbs, am, eo, msgr,
13740 cols#80, it#8, lines#52,
13741 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
13742 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
13743 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
13744 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13745 rmso=\E0, sgr0=\E0, smso=\E0,
13746 ibm-apl|apl|IBM apl terminal simulator,
13747 lines#25, use=dm1520,
13748 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
13749 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
13750 ibmmono|IBM workstation monochrome,
13752 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
13753 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
13754 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
13755 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
13756 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
13757 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
13759 ibmega|IBM Enhanced Color Display,
13760 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13761 nel=^M^J, use=ibmmono,
13762 # This color scheme is assumed in some recent IBM terminal descriptions
13763 # (green on black, emulated on a 16-color terminal).
13764 ibm+color|IBM color definitions,
13765 colors#8, ncv#3, pairs#64,
13767 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
13768 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
13769 ibm+16color|IBM aixterm color definitions,
13770 colors#16, pairs#256,
13771 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
13772 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
13773 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13774 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
13775 ibm5154|IBM 5154 Color display,
13776 colors#8, ncv@, pairs#64,
13777 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13779 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
13780 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
13782 ibmvga-c|IBM VGA display color termcap,
13783 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13784 nel=^M^J, use=ibmega-c,
13785 ibmvga|IBM VGA display,
13786 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
13787 nel=^M^J, use=ibmega,
13788 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
13789 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
13791 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
13792 ibm6155|IBM 6155 Black & White display,
13793 blink@, bold@, use=ibm5151,
13794 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
13795 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
13797 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
13798 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
13800 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
13802 ibm6154|IBM 6154 Color displays,
13803 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13804 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13805 sgr0=\E[0;10m, use=ibm5154,
13806 ibm6153|IBM 6153 Black & White display,
13807 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
13808 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
13809 sgr0=\E[0;10m, use=ibm5151,
13810 ibm6153-90|IBM 6153 Black & White display,
13812 blink@, bold@, use=ibm5151,
13813 ibm6153-40|IBM 6153 Black & White display,
13814 cols#40, lines#12, use=ibm6153-90,
13815 ibm8512|ibm8513|IBM color VGA Terminal,
13817 cols#80, it#8, lines#25,
13818 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
13819 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
13820 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
13821 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
13822 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
13823 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
13824 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13825 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
13826 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
13827 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
13828 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
13829 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
13830 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13832 hft-c|HFT with Color,
13833 colors#8, pairs#64,
13834 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
13835 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
13836 use=ibm5151, use=ibm+color,
13837 hft-c-old|HFT with Color PC850,
13838 colors#8, pairs#64,
13839 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
13841 hft-old|AIWS High Function Terminal,
13844 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
13845 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13846 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
13847 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
13848 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13849 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
13850 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
13851 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
13852 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
13853 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
13854 ibm-system1|system1|ibm system/1 computer,
13857 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
13858 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
13860 # lft-pc850 : IBM Low Function Terminal Device
13861 # lft "supports" underline, bold, and blink in the sense that the lft code
13862 # sets all the right bits. HOWEVER, depending upon the adapter, these
13863 # attributes may or may not be supported by the device driver.
13864 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
13866 cols#80, it#8, lines#25,
13867 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13868 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13869 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13870 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13871 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13872 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
13873 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
13874 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
13875 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
13876 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
13877 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
13878 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
13879 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
13880 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
13881 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
13882 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
13883 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
13884 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
13885 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
13886 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
13887 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
13888 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
13889 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
13890 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
13891 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13893 ibm5081|hft|IBM Megapel Color display,
13894 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
13895 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
13896 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
13899 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
13901 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
13903 ibm8514|IBM 8514/a color VGA display,
13905 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
13906 ibm8514-c|IBM 8514 color display with standout and underline,
13909 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
13910 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
13914 # AIX entries. IBM ships these with AIX 3.2.5.
13915 # -- added rc, sc based on manpage -TD
13916 # Note that we could use ibm+16color, but that is not how IBM defines this one.
13917 aixterm|IBM Aixterm Terminal Emulator,
13919 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
13920 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
13921 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
13922 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
13923 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
13925 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
13926 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
13927 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13928 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
13929 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
13931 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
13932 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13933 tsl=\E[?%p1%dT, use=ibm6153,
13934 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
13935 acsc@, use=aixterm,
13936 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
13937 acsc@, use=aixterm-m,
13939 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
13940 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
13941 use=ibm+16color, use=aixterm,
13943 #### Infoton/General Terminal Corp.
13946 # gt100 sounds like something DEC would come out with. Let's hope they don't.
13947 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
13950 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13951 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
13952 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
13953 ind=^J, rmso=\Ea, smso=\Eb,
13957 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
13958 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
13959 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
13960 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
13961 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
13965 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
13966 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
13967 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
13971 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
13972 ed=^K, ind=^J, ll=^H^\,
13974 # The ICL6402 was actually the Kokusai Display System 6402.
13975 # The 6404 was the KDS7372 (color version of the 6402).
13977 # ICL6404 control codes follow:
13980 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
13981 #ctrl-A set SOM position at cursor position
13987 #ctrl-L Cursor right
13988 #ctrl-M Carriage return
13989 #ctrl-N Disable xon/xoff to host
13990 #ctrl-O Enable xon/xoff to host
13991 #ctrl-R Enable bidirectional mode
13992 #ctrl-T Disable bidirectional mode
13993 #ctrl-V Cursor down
13994 #ctrl-Z Clear unprotected data to insert char
13995 #ctrl-^ Cursor home
13998 #ESC lead-in char for multiple character command
14000 #ESC space R execute power on sequence
14001 #ESC ! p1 p2 define scroll region:
14002 # p1 = scroll top line: 20h - 37h
14003 # p1 = scroll bottom line: 20h - 37h
14004 #ESC " unlock keyboard
14005 #ESC # lock keyboard
14006 #ESC $ Semi-graphics mode on
14007 #ESC % Semi-graphics mode off
14008 #ESC & protect mode on
14009 #ESC ' protect mode off
14010 #ESC ( write protect mode off (full intensity)
14011 #ESC ) write protect mode on (half intensity)
14013 #ESC * clear screen
14014 #ESC + clear unprotected data to insert char
14015 #ESC , clear unprotected data to half intensity spaces
14016 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
14017 # p1 = page number 0 - 3
14018 # p2 = row 20h - 7fh
14019 # p3 = column (lo) 20h - 7fh
14020 # p4 = column (hi) 20h - 21h (only 132 col)
14021 #ESC . p1 set cursor style:
14022 # p1 = 0 invisible cursor
14023 # p1 = 1 block blinking cursor
14024 # p1 = 2 block steady cursor
14025 # p1 = 3 underline blinking cursor
14026 # p1 = 4 underline steady cursor
14027 #ESC / transmit cursor location (page, row, column)
14028 #ESC 0 p1 p2 p3 p4 program edit key:
14029 # p1 = edit key code: '@'-'S', '`'-'s'
14030 # p2 p3 p4 = program data (3 bytes)
14033 #ESC 2 clear tab at cursor
14034 #ESC 3 clear all tabs
14035 #ESC 4 send unprotect line to cursor
14036 #ESC 5 send unprotect page to cursor
14037 #ESC 6 send line to cursor
14038 #ESC 7 send page to cursor
14039 #ESC 8 n set scroll mode:
14040 # n = 0 set jump scroll
14041 # n = 1 set smooth scroll
14042 #ESC 9 n control display:
14043 # n = 0 display off
14045 #ESC : clear unprotected data to null
14046 #ESC ; clear unprotected data to insert char
14049 #ESC = p1 p2 address cursor to row, column
14050 # p1 = row 20h - 7fh
14051 # p2 = column (lo) 20h - 7fh
14052 # p3 = column (hi) 20h - 21h (only 132 col)
14053 #ESC > keyclick off
14054 #ESC ? transmit cursor location (row, column)
14056 #ESC @ copy print mode on
14057 #ESC A copy print mode off
14058 #ESC B block mode on
14059 #ESC C block mode off (conversation mode)
14060 #ESC D F set full duplex
14061 #ESC D H set half duplex
14063 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
14064 # 0 = black, 1 = red, 2 = green, 3 = yellow
14065 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
14066 #ESC G n set serial field attribute (n = 30h - 3Fh)
14067 #ESC H n full graphics mode:
14068 # n = 0 exit full graphics mode
14069 # n = 1 enter full graphics mode
14072 #ESC K forward page
14074 #ESC L unformatted page print
14075 #ESC M L move window left (132 col mode only)
14076 #ESC M R move window right (132 col mode only)
14077 #ESC N set page edit (clear line edit)
14078 #ESC O set line edit (clear page edit)
14079 #ESC P formatted page print
14080 #ESC Q character insert
14082 #ESC S send message unprotected only
14083 #ESC T erase line to insert char
14084 #ESC U set monitor mode (see ESC X, ESC u)
14086 #ESC V n select video attribute mode:
14087 # n = 0 serial field attribute mode
14088 # n = 1 parallel character attribute mode
14089 #ESC V 2 n define line attribute:
14090 # n = 0 single width single height
14091 # n = 1 single width double height
14092 # n = 2 double width single height
14093 # n = 3 double width double height
14094 #ESC V 3 n select character font:
14095 # n = 0 system font
14096 # n = 1 user defined font
14097 #ESC V 4 n select screen mode:
14098 # n = 0 page screen mode
14099 # n = 1 virtual screen mode
14100 #ESC V 5 n control mouse mode:
14101 # n = 0 disable mouse
14102 # n = 1 enable sample mode
14103 # n = 2 send mouse information
14104 # n = 3 enable request mode
14105 #ESC W character delete
14106 #ESC X clear monitor mode (see ESC U, ESC u)
14107 #ESC Y erase page to insert char
14109 #ESC Z n send user/status line:
14110 # n = 0 send user line
14111 # n = 1 send status line
14112 # n = 2 send terminal ID
14113 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
14117 # 3 = blink blank (= blank)
14119 # 5 = reverse blank
14120 # 6 = reverse blink
14121 # 7 = reverse blink blank (= reverse blank)
14123 # 9 = underline blank
14124 # : = underline blink
14125 # ; = underline blink blank
14126 # < = reverse underline
14127 # = = reverse underline blank
14128 # > = reverse underline blink
14129 # ? = reverse underline blink blank
14130 # p2, p3: f/grnd, b/grnd colour
14131 # (see ESC F for colours)
14132 # use ZZ for mono, eg.
14133 # ESC [ 0 Z Z for normal
14134 # ESC [ 4 Z Z for inverse etc.
14136 #ESC \ n set page size:
14137 # n = 1 24 lines/page
14138 # n = 2 48 lines/page
14139 # n = 3 72 lines/page
14140 # n = 4 96 lines/page
14141 #ESC ] n set Wordstar mode:
14142 # n = 0 normal (KDS7372) mode
14143 # n = 1 Wordstar mode
14145 #ESC b set foreground colour screen
14147 #ESC c n enter self-test mode:
14148 # n = 0 exit self test mode
14152 # n = 4 screen display test
14153 # n = 5 main/printer port test
14154 # n = 6 mouse port test
14155 # n = 7 graphics board test
14156 # n = 8 graphics memory test
14157 # n = 9 display all 'E'
14158 # n = : display all 'H'
14159 #ESC d set background colour screen
14161 #ESC e n program insert char (n = insert char)
14162 #ESC f text CR load user status line with 'text'
14164 #ESC g display user status line on 25th line
14165 #ESC h display system status line on 25th line
14167 #ESC j reverse linefeed
14168 #ESC k n duplex/local edit mode:
14169 # n = 0 duplex edit mode
14170 # n = 1 local edit mode
14171 #ESC l n select virtual screen:
14174 #ESC m save current config to NVRAM
14175 #ESC n p1 select display screen:
14180 #ESC o p1 p2 set characters/line and attribute:
14181 # p1 = 0 80 chars/line
14183 #ESC o p1 p2 set characters/line and attribute:
14184 # p1 = 0 80 chars/line
14185 # p1 = 1 132 chars/line
14186 # p2 = 0 single width single height
14187 # p2 = 1 single width double height
14188 # p2 = 2 double width single height
14189 # p2 = 3 double width double height
14191 #ESC q insert mode on
14192 #ESC r edit mode on
14193 #ESC s send message all
14194 #ESC t erase line to null
14195 #ESC u clear monitor mode (see ESC U, ESC X)
14196 #ESC v autopage mode on
14197 #ESC w autopage mode off
14198 #ESC x p1 p2 p3 define delimiter code...
14199 #ESC y erase page to null
14201 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
14202 # p1 = starting row
14203 # p2 = starting column
14207 #ESC { p1 p2 p3 p4 configure main port
14208 # (baud, stop bits, parity, word length)
14210 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
14211 # p1 = function key code:
14212 # '1' - ';' normal f1- f11
14213 # '<' - 'F' shifted f1 - f11
14214 # p2 = program mode:
14218 # Ctrl-Y = terminator
14219 # (use Ctrl-P to escape ^P, ^Y )
14221 #ESC } p1 p2 p3 p4 configure printer port
14222 # (baud, stop bits, parity, word length)
14223 #ESC ~ send system status
14225 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
14227 # Entry is by esr going solely on above information and is UNTESTED.
14228 # This actually looks a lot like a Televideo 9xx.
14229 # This entry uses page 0 and is monochrome; I'm not brave enough to try
14230 # to make color work without a test terminal. The <am> capability is a guess.
14231 # The initialization string sets conversation mode, blinking underline cursor,
14232 # full duplex, parallel attribute mode, display user status line, white
14233 # foreground, black background, normal highlight.
14235 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
14238 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
14240 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
14241 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
14242 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
14243 hts=\E1, il1=\EE, invis=\E[1ZZ,
14244 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
14245 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
14246 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
14247 sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
14248 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
14249 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
14250 rs2=\Eo1, use=icl6404,
14252 #### Interactive Systems Corp
14254 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
14255 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
14256 # bought out by Sun.
14259 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
14260 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
14261 # ":le=^_:" later overridden -- esr)
14262 intext|Interactive Systems Corporation modified owl 1200,
14264 cols#80, it#8, lines#24, xmc#1,
14265 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
14266 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
14267 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
14268 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
14269 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
14270 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
14271 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
14272 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
14274 intext2|intextii|INTERACTIVE modified owl 1251,
14276 cols#80, lines#24, xmc#0,
14277 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
14278 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
14279 dl1=\E[M, ed=\E[J, el=\E[K,
14280 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
14281 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
14282 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
14283 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
14284 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
14285 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
14286 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
14287 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
14290 #### Kimtron (abm, kt)
14292 # Kimtron seems to be history, but as March 1998 these people are still
14293 # offering repair services for Kimtron equipment:
14295 # Com/Pair Monitor Service
14296 # 1105 N. Cliff Ave.
14297 # Sioux Falls, South Dakota 57103
14299 # WATS voice: 1-800/398-4946
14300 # POTS fax: +1 605/338-8709
14301 # POTS voice: +1 605/338-9650
14302 # Email: <compair@sd.cybernex.net>
14303 # Internet/Web: <http://www.com-pair.com>
14305 # Kimtron entries include (undocumented) codes for: enter dim mode,
14306 # enter bold mode, enter reverse mode, turn off all attributes.
14309 # Kimtron ABM 85 added by Dual Systems
14310 # (abm85: removed duplicated ":kd=^J:" -- esr)
14311 abm85|Kimtron ABM 85,
14312 OTbs, am, bw, msgr,
14313 cols#80, it#8, lines#24, xmc#1,
14314 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
14315 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14316 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
14317 if=/usr/share/tabset/stdcrt, il1=\EE,
14318 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
14319 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
14320 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
14321 # Kimtron ABM 85H added by Dual Systems.
14322 # Some notes about the abm85h entries:
14323 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
14324 # firmware revs prior to SP51
14325 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
14326 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
14327 # in some places and NOT software settable i.e., <is2> can't fix it)
14328 # 3) In 85h mode, the arrow keys and special functions transmit when
14329 # the terminal is in dup-edit, and work only locally in local-edit.
14330 # Vi won't swallow `del char' for instance, but <smcup> turns on
14331 # dup-edit anyway so that the arrow keys will work right. If the
14332 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
14333 # <is2>. Note that 920E mode does not have software commands to toggle
14334 # between dup and local edit, so you get whatever was set last on the
14336 # 4) <flash> attribute is nice, but seems too slow to work correctly
14338 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
14339 # are selected, the <xmc@> entry should be removed.
14340 # 6) auto new-line should be on (selectable from setup mode only)
14342 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
14343 abm85h|Kimtron ABM 85H native mode,
14346 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
14348 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
14349 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
14351 abm85e|Kimtron ABM 85H in 920E mode,
14353 bel=^G, dim=\E), flash@,
14354 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
14355 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14356 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
14359 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
14360 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
14361 # From: <malman@bbn-vax.arpa>
14362 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
14363 kt7|kimtron model kt-7,
14365 cols#80, it#8, lines#24,
14366 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
14367 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14368 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
14369 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
14370 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
14371 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
14372 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
14373 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
14374 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
14375 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
14376 # other kt7 entry and the adjacent key capabilities). Removed EE which is
14377 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
14378 # but we can't figure out what.
14379 kt7ix|kimtron model kt-7 or 70 in IX mode,
14381 cols#80, it#8, lines#25,
14382 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
14383 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
14384 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14385 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
14386 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
14387 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
14388 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
14389 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14390 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14391 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
14392 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
14393 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
14395 #### Microdata/MDIS
14397 # This was a line of terminals made by McDonnell-Douglas Information Systems.
14398 # These entries come direct from MDIS documentation. I have edited them only
14399 # to move primary names of the form p[0-9] * to aliases, and to comment out
14400 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
14401 # also removed the change history; the last version indicates this is
14402 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
14405 # McDonnell Information Systems Terminal Family History
14406 # =========================================
14408 # Prism-1, Prism-2 and P99:
14409 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
14411 # Prism-4 and Prism-5:
14412 # Slightly less ancient range of Microdata terminals. Follow-on from
14413 # Prism-2, but with many enhancements. P5 has eight display pages.
14416 # A special terminal for use with library systems, primarily in Germany.
14417 # Limited numbers. Similar functionality to P5 (except attributes?).
14419 # Prism-7, Prism-8 and Prism-9:
14420 # More recent range of MDIS terminals, in which P7 and P8
14421 # replace the P4 & P5, with added functionality, and P9 is the flagship.
14422 # The P9 has two emulation modes - P8 and ANSI - and includes a
14423 # large number of the DEC VT220 control sequences. Both
14424 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
14426 # Prism-12 and Prism-14:
14427 # Latest range, functionally very similar to the P9. The P14 has a
14428 # black-on-white overscanning screen.
14430 # The terminfo definitions given here are:
14432 # p2 - Prism-2 (or Prism-1 or P99).
14434 # p4 - Prism-4 (and older P7s & P8s).
14435 # p5 - Prism-5 (or Prism-6).
14438 # p8 - Prism-8 (in national or multinational mode).
14439 # p8-w - 132 column version of p8.
14440 # p9 - Prism-9 in ANSI mode.
14441 # p9-w - 132 column version of p9.
14442 # p9-8 - Prism-9 in Prism-8 emulation mode.
14443 # p9-8-w - As p9-8, but with 132 columns.
14445 # p12 - Prism-12 in ANSI mode.
14446 # p12-w - 132 column version of p12.
14447 # p12-m - Prism-12 in MDC emulation mode.
14448 # p12-m-w - As p12-m, but with 132 columns.
14449 # p14 - Prism-14 in ANSI mode.
14450 # p14-w - 132 column version of p14.
14451 # p14-m - Prism-14 in MDC emulation mode.
14452 # p14-m-w - As p14-m, but with 132 columns.
14457 # Includes Prism-1 and basic P99 without SP or MP loaded.
14458 # The simplest form of Prism-type terminal.
14459 # Basic cursor movement and clearing operations only.
14460 # No video attributes.
14462 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14463 # value up, followed by backspace.
14465 prism2|MDC Prism-2,
14468 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14469 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14470 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
14471 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14472 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
14477 # Includes early versions of P7 & P8.
14478 # Basic family definition for most Prisms (except P2 and P9 ANSI).
14480 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
14481 # value up, followed by backspace.
14482 # Cursor key definitions removed because they interfere with vi and csh keys.
14484 prism4|p4|P4|MDC Prism-4,
14485 am, bw, hs, mc5i, msgr,
14486 cols#80, lines#24, wsl#72, xmc#1,
14487 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
14488 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
14489 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14490 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
14491 fsl=^]\345, home=^A,
14492 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
14493 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
14494 rev=^CD, rmso=^C\s, rmul=^C\s,
14495 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
14496 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
14497 vpa=\013%p1%{32}%+%c,
14502 # Same definition as p4. Includes Prism-6 (not tested!).
14503 # Does not use any multi-page features.
14505 prism5|p5|P5|MDC Prism-5,
14511 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
14513 # Use p4 for very early models of P7.
14514 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14516 prism7|p7|P7|MDC Prism-7,
14517 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
14522 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
14523 # Supports national and multinational character sets.
14525 # Alternate char set operations only work in multinational mode.
14526 # Use p4 for very early models of P8.
14527 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14528 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14530 prism8|p8|P8|MDC Prism-8,
14531 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
14532 vpa=\E[%i%p1%dd, use=p4,
14534 # p8-w: Prism-8 in 132 column mode
14535 # --------------------------------
14537 # 'Wide' version of p8.
14539 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
14541 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
14543 is2=\E[<12h\E[<14h, use=p8,
14545 # p9: Prism-9 in ANSI mode
14546 # -------------------------
14548 # The "flagship" model of this generation of terminals.
14549 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
14551 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
14552 # Fixes to deal with terminal firmware bugs:
14553 # . 'ri' uses insert-line since rev index doesn't always
14554 # . 'sgr0' has extra '0' since esc[m fails
14555 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
14556 # Not covered in the current definition:
14558 # . Programming Fn keys
14559 # . Graphic characters (defaults correctly to vt100)
14560 # . Padding values (sets xon)
14561 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
14563 prism9|p9|P9|MDC Prism-9 in ANSII mode,
14564 am, bw, hs, mc5i, msgr, xenl, xon,
14565 cols#80, it#8, lines#24, vt#3, wsl#72,
14566 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
14567 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
14568 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14569 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14570 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14571 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
14572 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
14573 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
14574 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
14575 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
14576 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
14577 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
14578 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
14579 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
14580 khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
14581 prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
14582 ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
14583 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
14585 sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
14586 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
14587 tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
14589 # p9-w: Prism-9 in 132 column mode
14590 # --------------------------------
14592 # 'Wide' version of p9.
14594 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
14596 is2=\E[&p\E[<12l\E F\E[<14h,
14597 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
14599 # p9-8: Prism-9 in P8 mode
14600 # ------------------------
14602 # P9 terminal in P8 emulation mode.
14603 # Similar to p8 definition.
14604 # Insertion and deletion operations possible.
14606 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
14607 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14608 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
14610 # p9-8-w: Prism-9 in P8 and 132 column modes
14611 # ------------------------------------------
14613 # P9 terminal in P8 emulation mode and 132 column mode.
14615 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
14616 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14617 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
14619 # p12: Prism-12 in ANSI mode
14620 # ---------------------------
14622 # See p9 definition.
14624 prism12|p12|P12|MDC Prism-12 in ANSI mode,
14627 # p12-w: Prism-12 in 132 column mode
14628 # ----------------------------------
14630 # 'Wide' version of p12.
14632 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
14635 # p12-m: Prism-12 in MDC emulation mode
14636 # -------------------------------------
14638 # P12 terminal in MDC emulation mode.
14639 # Similar to p8 definition.
14640 # Insertion and deletion operations possible.
14642 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
14645 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
14646 # -------------------------------------------------------
14648 # P12 terminal in MDC emulation mode and 132 column mode.
14650 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
14653 # p14: Prism-14 in ANSII mode
14654 # ---------------------------
14656 # See p9 definition.
14658 prism14|p14|P14|MDC Prism-14 in ANSII mode,
14661 # p14-w: Prism-14 in 132 column mode
14662 # ----------------------------------
14664 # 'Wide' version of p14.
14666 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
14669 # p14-m: Prism-14 in MDC emulation mode
14670 # -------------------------------------
14672 # P14 terminal in MDC emulation mode.
14673 # Similar to p8 definition.
14674 # Insertion and deletion operations possible.
14676 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
14679 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
14680 # -------------------------------------------------------
14682 # P14 terminal in MDC emulation mode and 132 column mode.
14684 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
14687 # End of McDonnell Information Systems Prism definitions
14689 # These things were popular in the Pick database community at one time
14690 # From: George Land <georgeland@aol.com> 24 Sep 1996
14691 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
14693 cols#80, lines#24, ma#1, wsl#78, xmc#1,
14694 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
14695 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
14696 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
14697 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
14698 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
14699 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
14700 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14701 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
14702 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
14703 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
14706 #### Microterm (act, mime)
14708 # The mime1 entries refer to the Microterm Mime I or Mime II.
14709 # The default mime is assumed to be in enhanced act iv mode.
14712 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
14713 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
14714 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
14715 # since Sytek insists ^S means xoff.
14716 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
14717 act4|microterm|microterm act iv,
14720 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
14721 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
14722 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
14723 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
14724 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
14726 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
14727 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
14728 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
14729 act5|microterm5|microterm act v,
14730 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
14732 # Mimes using brightness for standout. Half bright is really dim unless
14733 # you turn up the brightness so far that lines show up on the screen.
14734 mime-fb|full bright mime1,
14735 is2=^S\E, rmso=^S, smso=^Y, use=mime,
14736 mime-hb|half bright mime1,
14737 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
14738 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
14739 # the more plausible ":do=^J:" -- esr)
14740 # uc was at one time disabled to get around a curses bug, be wary of it
14741 mime|mime1|mime2|mimei|mimeii|microterm mime1,
14743 cols#80, it#8, lines#24, vt#9,
14744 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
14745 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
14746 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
14747 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
14748 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
14749 # These termcaps (for mime2a) put the terminal in low intensity mode
14750 # since high intensity mode is so obnoxious.
14751 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
14754 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14755 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
14756 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
14757 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
14758 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
14759 smir=\EE, smso=\E\:, smul=\E6,
14760 # This is the preferred mode (but ^X can't be used as a kill character)
14761 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
14763 cols#80, it#8, lines#24,
14764 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14765 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
14766 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
14767 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
14768 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
14769 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
14770 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
14771 mime3a|mime1 emulating 3a,
14773 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
14774 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
14776 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
14778 # Wed Mar 9 18:53:21 1983
14779 # We run our terminals at 2400 baud, so there might be some timing problems at
14780 # higher speeds. The major improvements in this model are the terminal now
14781 # scrolls down and insert mode works without redrawing the rest of the line
14782 # to the right of the cursor. This is done with a bit of a kludge using the
14783 # exit graphics mode to get out of insert, but it does not appear to hurt
14784 # anything when using vi at least. If you have some users using act4s with
14785 # programs that use curses and graphics mode this could be a problem.
14786 mime314|mm314|mime 314,
14789 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
14790 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
14791 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
14792 # Microterm mime 340 from University of Wisconsin
14793 mm340|mime340|mime 340,
14795 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14796 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14797 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
14798 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
14799 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
14800 # This came from University of Wisconsin marked "astro termcap for jooss".
14801 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
14802 # also added <rmam>/<smam> based on the init string -- esr)
14803 mt4520-rv|micro-term 4520 reverse video,
14804 am, hs, msgr, xenl, xon,
14805 cols#80, it#8, lines#24, wsl#80,
14806 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
14807 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14808 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14809 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14810 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14811 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14812 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
14813 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14814 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
14815 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14816 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
14817 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
14818 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
14819 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
14820 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
14821 tbc=\E[g, tsl=\E[25;1H,
14823 # Fri Aug 5 08:11:57 1983
14824 # This entry works for the ergo 4000 with the following setups:
14825 # ansi,wraparound,newline disabled, xon/xoff disabled in both
14828 # WARNING!!! There are multiple versions of ERGO 4000 microcode
14829 # Be advised that very early versions DO NOT WORK RIGHT !!
14830 # Microterm does have a ROM exchange program- use it or lose big
14831 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
14832 ergo4000|microterm ergo 4000,
14835 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
14836 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14837 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
14838 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
14839 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
14840 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14841 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
14842 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
14843 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
14844 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
14849 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
14850 # For what happened to that group, see the ADDS section.
14852 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
14855 # The following vendor-supplied termcaps were captured from the Boundless
14856 # Technologies site, 8 March 1998. I removed all-upper-case names that were
14857 # identical, except for case, to lower-case ones. I also uncommented the acsc
14860 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14861 # DEC vt200/300 with color capabilities added.
14862 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
14863 colors#8, pairs#64,
14864 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14866 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14867 # DEC vt200/300 with color capabilities added.
14868 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
14869 colors#8, pairs#64,
14870 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14871 use=ncr260vt300wan,
14872 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
14873 # DEC vt200/300 with color capabilities added.
14874 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
14875 colors#8, pairs#64,
14876 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14878 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
14879 # DEC vt200/300 with color capabilities added.
14880 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
14881 colors#8, pairs#64,
14882 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
14883 use=ncr260vt300wpp,
14884 # This definition for ViewPoint supports several attributes. This means
14885 # that it has magic cookies (extra spaces where the attributes begin).
14886 # Some applications do not function well with magic cookies. The System
14887 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
14888 # If supporting various attributes is not vital, 'xmc#1' and the extra
14889 # attributes can be removed.
14890 # Mapping to ASCII character set ('acsc' capability) can also be
14891 # restored if needed.
14892 ncr260vppp|NCR 2900_260 viewpoint,
14893 am, bw, hs, km, mc5i, mir, msgr, xon,
14894 cols#80, lines#24, nlab#32, xmc#1,
14895 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
14896 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
14897 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
14898 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
14899 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
14900 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
14901 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
14902 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14903 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
14904 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
14905 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
14906 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
14907 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
14908 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
14909 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
14910 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
14911 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
14912 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
14913 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
14914 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
14915 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
14916 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
14917 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14918 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
14919 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
14920 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
14922 cup=\Ea%i%p1%dR%p2%dC$<30>,
14923 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14924 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
14926 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
14927 am, hs, mir, msgr, xenl, xon,
14928 cols#80, lines#24, nlab#32,
14929 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14930 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14931 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14932 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
14933 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14934 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14935 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14936 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14937 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14938 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
14939 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
14940 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
14941 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
14943 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14944 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14945 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
14946 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
14947 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
14948 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
14949 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14951 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
14952 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
14953 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
14954 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
14955 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
14957 cup=\E[%i%p1%d;%p2%dH$<30>,
14958 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14959 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14961 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
14962 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14963 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
14964 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
14965 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
14966 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
14967 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14968 smkx=\E=, use=ncr260vt100an,
14969 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
14971 cup=\E[%i%p1%d;%p2%dH$<30>,
14972 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14973 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14975 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
14976 am, hs, mir, msgr, xenl, xon,
14977 cols#80, lines#24, nlab#32,
14978 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14979 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14980 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
14981 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
14982 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
14983 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
14984 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
14985 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
14986 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
14987 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
14988 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
14989 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
14990 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
14991 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
14992 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14993 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
14994 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
14995 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
14996 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
14997 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
14998 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
14999 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
15000 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
15001 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
15002 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
15003 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
15004 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
15005 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
15006 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15008 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15009 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15010 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15011 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15013 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
15015 cup=\E[%i%p1%d;%p2%dH$<30>,
15016 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15017 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
15019 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
15020 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15021 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15022 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15023 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15025 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
15027 cup=\E[%i%p1%d;%p2%dH$<30>,
15028 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15029 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15031 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
15032 am, hs, mir, msgr, xenl, xon,
15033 cols#80, lines#24, nlab#32,
15034 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15035 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
15036 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
15037 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
15038 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
15039 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
15040 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
15041 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
15042 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
15043 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
15044 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
15045 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
15046 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
15047 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15048 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15049 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
15050 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
15051 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
15052 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
15053 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
15054 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
15055 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
15056 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
15057 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15058 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
15059 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
15060 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
15062 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15064 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
15065 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
15066 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15067 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
15069 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
15071 cup=\E[%i%p1%d;%p2%dH$<30>,
15072 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15073 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
15075 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
15076 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
15077 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
15078 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15079 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
15081 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
15083 cup=\E[%i%p1%d;%p2%dH$<30>,
15084 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15085 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
15087 # This terminfo file contains color capabilities for the Wyse325 emulation of
15088 # the NCR 2900/260C color terminal. Because of the structure of the command
15089 # (escape sequence) used to set color attributes, one of the fore/background
15090 # colors must be preset to a given value. I have set the background color to
15091 # black. The user can change this setup by altering the last section of the
15092 # 'setf' definition. The escape sequence to set color attributes is
15093 # ESC d y <foreground_color> <background_color> 1
15094 # In addition, the background color can be changed through the desk accessories.
15095 # The capablitiy 'op' sets colors to green on black (default combination).
15097 # NOTE: The NCR Unix System Administrator's Shell will not function properly
15098 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
15099 # capability and recompile if you wish to have it included.
15101 ncr260wy325pp|NCR 2900_260 wyse 325,
15102 am, bw, hs, km, mc5i, mir, msgr, xon,
15103 colors#16, cols#80, lines#24, ncv#33, nlab#32,
15104 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15105 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
15106 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15107 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15108 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15109 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
15110 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15111 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15112 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15113 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
15114 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
15115 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
15116 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
15117 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
15118 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
15119 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
15120 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15121 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
15122 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15123 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15124 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15125 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15126 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15128 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
15129 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
15130 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15132 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
15134 cup=\Ea%i%p1%dR%p2%dC$<30>,
15135 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15136 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15138 # This definition for Wyse 350 supports several attributes. This means
15139 # that it has magic cookies (extra spaces where the attributes begin).
15140 # Some applications do not function well with magic cookies. The System
15141 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15142 # If supporting various attributes is not vital, 'xmc#1' and the extra
15143 # attributes can be removed.
15144 # Mapping to ASCII character set ('acsc' capability) can also be
15145 # restored if needed.
15146 # In addition, color capabilities have been added to this file. The drawback,
15147 # however, is that the background color has to be black. The foreground colors
15148 # are numbered 0 through 15.
15150 # NOTE: The NCR Unix System Administrator's Shell does not function properly
15151 # with the 'pairs' capability defined as below. If you wish to
15152 # have it included, Un-comment it and recompile (using 'tic').
15154 ncr260wy350pp|NCR 2900_260 wyse 350,
15155 am, bw, hs, km, mc5i, mir, msgr, xon,
15156 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
15157 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15158 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15159 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15160 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
15161 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15162 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
15163 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
15164 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15165 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15166 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15167 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15168 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15169 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15170 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15171 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15172 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15173 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15174 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15175 mc0=\EP$<10>, mc4=^T, mc5=^R,
15176 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
15177 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
15178 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15179 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15181 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
15182 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
15183 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
15185 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
15187 cup=\Ea%i%p1%dR%p2%dC$<30>,
15188 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15189 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15191 # This definition for Wyse 50+ supports several attributes. This means
15192 # that it has magic cookies (extra spaces where the attributes begin).
15193 # Some applications do not function well with magic cookies. The System
15194 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
15195 # If supporting various attributes is not vital, 'xmc#1' and the extra
15196 # attributes can be removed.
15197 # Mapping to ASCII character set ('acsc' capability) can also be
15198 # restored if needed.
15199 # (ncr260wy50+pp: originally contained commented-out
15200 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
15201 ncr260wy50+pp|NCR 2900_260 wyse 50+,
15202 am, bw, hs, km, mc5i, mir, msgr, xon,
15203 cols#80, lines#24, nlab#32, xmc#1,
15204 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
15205 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
15206 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15207 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
15208 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
15209 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
15210 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
15212 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15213 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
15214 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
15215 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
15216 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
15217 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
15218 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
15219 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
15220 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
15221 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
15222 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
15223 mc0=\EP$<10>, mc4=^T, mc5=^R,
15224 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
15225 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15226 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15227 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15228 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
15229 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
15230 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
15232 cup=\Ea%i%p1%dR%p2%dC$<30>,
15233 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15234 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
15236 ncr260wy60pp|NCR 2900_260 wyse 60,
15237 am, bw, hs, km, mc5i, mir, msgr, xon,
15238 cols#80, lines#24, nlab#32,
15239 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
15240 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
15241 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
15242 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
15243 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
15244 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
15245 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
15247 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15248 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
15249 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
15250 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
15251 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15252 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
15253 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
15254 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
15255 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
15256 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
15257 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15258 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
15259 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
15260 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
15261 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
15262 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15263 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
15264 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
15266 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
15268 cup=\Ea%i%p1%dR%p2%dC$<30>,
15269 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15270 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
15272 ncr160vppp|NCR 2900_160 viewpoint,
15274 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
15276 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
15278 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
15280 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
15281 use=ncr260vt100wan,
15282 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
15283 use=ncr260vt100wpp,
15284 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
15286 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
15288 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
15289 use=ncr260vt200wan,
15290 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
15291 use=ncr260vt200wpp,
15292 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
15294 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
15296 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
15297 use=ncr260vt300wan,
15298 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
15299 use=ncr260vt300wpp,
15300 ncr160wy50+pp|NCR 2900_160 wyse 50+,
15302 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
15303 use=ncr260wy50+wpp,
15304 ncr160wy60pp|NCR 2900_160 wyse 60,
15306 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
15308 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
15309 am, hs, mc5i, mir, msgr, xon,
15310 cols#80, it#8, lines#24, nlab#32,
15311 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
15312 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
15313 clear=\E[2J\E[1;1H$<300>, cr=^M,
15314 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
15315 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
15316 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
15317 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
15318 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
15319 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
15320 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
15321 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
15322 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
15324 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
15325 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
15326 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
15327 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
15328 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
15329 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
15330 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15332 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
15333 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
15334 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
15336 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
15338 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
15339 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
15342 # Vendor-supplied NCR termcaps end here
15344 # NCR7900 DIP switches:
15348 # 5 - Parity (Odd/Even)
15349 # 6 - Don't Send or Do Send Spaces
15350 # 7 - Parity Enable
15351 # 8 - Stop Bits (One/Two)
15354 # 1 - Upper/Lower Shift
15355 # 2 - Typewriter Shift
15356 # 3 - Half Duplex / Full Duplex
15357 # 4 - Light/Dark Background
15358 # 5-6 - Carriage Return Without / With Line Feed
15359 # 7 - Extended Mode
15360 # 8 - Suppress Keyboard Display
15363 # 1 - End of line entry disabled/enabled
15364 # 2 - Conversational mode / (Local?) Mode
15365 # 3 - Control characters displayed / not displayed
15366 # 4 - (2-wire?) / 4-wire communications
15367 # 5 - RTS on and off for each character
15368 # 6 - (50Hz?) / 60 Hz
15369 # 7 - Exit after level zero diagnostics
15370 # 8 - RS-232 interface
15373 # 1 - Reverse Channel (yes / no)
15374 # 2 - Manual answer (no / yes)
15375 # 3-4 - Cursor appearance
15376 # 5 - Communication Rate
15377 # 6 - Enable / Disable EXT turnoff
15378 # 7 - Enable / Disable CR turnoff
15379 # 8 - Enable / Disable backspace
15381 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
15382 # reverse, blink, dim, and underline) the appropriate number of bits (by
15383 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
15384 # '@' is (effectively) "or"ed with each attribute to generate the proper third
15385 # character in the <ESC>0 sequence. The <sgr> string implements the following
15388 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
15389 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
15391 # Where: P1 <==> Standout attribute parameter
15392 # P2 <==> Underline attribute parameter
15393 # P3 <==> Reverse attribute parameter
15394 # P4 <==> Blink attribute parameter
15395 # P5 <==> Dim attribute parameter
15396 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
15397 ncr7900i|ncr7900|ncr 7900 model 1,
15399 cols#80, lines#24, xmc#1,
15400 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15401 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
15402 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
15403 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
15405 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
15406 sgr0=\E0@, smso=\E0Q, smul=\E0`,
15407 ncr7900iv|ncr 7900 model 4,
15410 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
15411 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
15412 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
15413 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
15414 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
15415 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
15416 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
15417 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
15418 # The user can enter a CTRL-B to get out of this locked state.
15419 # In <hpa>, we want to output the character given by the formula:
15420 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
15421 ncr7901|ncr 7901 model,
15424 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
15425 cub1=^H, cud1=^J, cuf1=^F,
15426 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
15428 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
15429 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
15430 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
15431 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
15432 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
15433 vpa=\013%p1%{64}%+%c,
15435 # Newbury Data Recording Limited (Newbury Data)
15437 # Have been manufacturing and reselling various peripherals for a long time
15438 # They don't make terminals anymore, but are still in business (in 2007).
15439 # Their e-mail address is at ndsales@newburydata.co.uk
15440 # and their post address is:
15442 # Newbury Data Recording Ltd,
15443 # Premier Park, Road One,
15444 # Winsford, Cheshire, CW7 3PT
15446 # Their technical support is still good, they sent me for free a printed copy
15447 # of the 9500 user manual and I got it just 1 week after I first contacted them
15451 # Manufactured in the early/mid eighties, behaves almost the same as a
15452 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
15453 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
15454 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
15455 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
15456 # recognized: if you type in "ESC !", the next (third) character is not
15457 # echoed, showing that the terminal was actually waiting for a parameter!
15458 ndr9500|nd9500|Newbury Data 9500,
15459 am, bw, hs, mc5i, mir, msgr, ul, xon,
15460 cols#80, lines#24, wsl#79,
15461 acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
15462 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
15463 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15464 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
15465 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
15466 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
15467 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
15468 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
15469 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
15470 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
15471 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
15472 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
15473 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
15474 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
15475 pfloc=\E|%{48}%p1%+%c2%p2\031,
15476 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
15477 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
15478 sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
15479 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
15480 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
15482 ndr9500-nl|NDR 9500 with no status line,
15485 dsl@, fsl@, tsl@, use=ndr9500,
15487 ndr9500-25|NDR 9500 with 25th line enabled,
15488 lines#25, use=ndr9500,
15490 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
15491 lines#25, use=ndr9500-nl,
15493 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
15496 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
15497 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
15498 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
15500 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
15501 lines#25, use=ndr9500-mc,
15503 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
15506 dsl@, fsl@, tsl@, use=ndr9500-mc,
15508 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
15509 lines#25, use=ndr9500-mc-nl,
15511 #### Perkin-Elmer (Owl)
15513 # These are official terminfo entries from within Perkin-Elmer.
15516 bantam|pe550|pe6100|perkin elmer 550,
15519 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15520 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15521 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
15522 fox|pe1100|perkin elmer 1100,
15525 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15526 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15527 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
15528 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
15529 owl|pe1200|perkin elmer 1200,
15532 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
15533 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15534 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
15535 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
15536 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
15537 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
15538 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
15539 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
15540 pe1251|pe6300|pe6312|perkin elmer 1251,
15542 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
15543 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
15544 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
15545 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
15546 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
15547 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
15548 # (pe7000m: this had
15549 # rmul=\E!\0, smul=\E!\040,
15550 # which is probably wrong, it collides with kf0
15551 pe7000m|perkin elmer 7000 series monochrome monitor,
15554 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
15555 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
15556 ed=\EJ, el=\EI, home=\EH, ind=^J,
15557 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
15558 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
15559 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
15560 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
15562 pe7000c|perkin elmer 7000 series colour monitor,
15563 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
15564 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
15568 # Sperry Univac has merged with Burroughs to form Unisys.
15571 # This entry is for the Sperry UTS30 terminal running the TTY
15572 # utility under control of CP/M Plus 1R1. The functionality
15573 # provided is comparable to the DEC vt100.
15574 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
15575 uts30|sperry uts30 with cp/m@1R1,
15577 cols#80, lines#24, wsl#40,
15578 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15579 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
15580 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
15581 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
15582 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
15583 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
15584 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
15585 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
15586 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
15587 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
15588 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
15589 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
15590 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
15591 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
15592 smul=\E[4m, tsl=\E], uc=\EPB,
15596 # Tandem builds these things for use with its line of fault-tolerant
15597 # transaction-processing computers. They aren't generally available
15598 # on the merchant market, and so are fairly uncommon.
15601 tandem6510|adm3a repackaged by Tandem,
15604 # A funny series of terminal that TANDEM uses. The actual model numbers
15605 # have a fourth digit after 653 that designates minor variants. These are
15606 # natively block-mode and rather ugly, but they have a character mode which
15607 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
15608 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
15609 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
15610 tandem653|t653x|Tandem 653x multipage terminal,
15611 OTbs, am, da, db, hs,
15612 cols#80, lines#24, wsl#64, xmc#1,
15613 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
15614 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
15615 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
15616 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
15618 #### Tandy/Radio Shack
15620 # Tandy has a line of VDTs distinct from its microcomputers.
15623 dmterm|deskmate terminal,
15626 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
15627 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15628 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
15629 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
15630 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
15631 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
15632 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
15633 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
15635 dt100|dt-100|Tandy DT-100 terminal,
15637 cols#80, lines#24, xmc#1,
15638 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15639 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15640 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
15641 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
15642 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
15643 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
15644 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
15645 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
15646 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
15647 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
15648 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
15649 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
15650 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
15651 cols#132, use=dt100,
15652 dt110|Tandy DT-110 emulating ansi,
15655 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
15656 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
15657 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
15658 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
15659 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
15660 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
15661 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
15662 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
15663 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
15664 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
15665 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
15666 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15667 smacs=^N, smso=\E[7m, smul=\E[4m,
15668 pt210|TRS-80 PT-210 printing terminal,
15671 bel=^G, cr=^M, cud1=^J, ind=^J,
15673 #### Tektronix (tek)
15675 # Tektronix tubes are graphics terminals. Most of them use modified
15676 # oscilloscope technology incorporating a long-persistence green phosphor,
15677 # and support vector graphics on a main screen with an attached "dialogue
15678 # area" for interactive text.
15681 tek|tek4012|tektronix 4012,
15684 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
15685 ff=\014$<1000>, is2=\E^O,
15686 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15687 tek4013|tektronix 4013,
15688 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
15689 tek4014|tektronix 4014,
15691 is2=\E\017\E9, use=tek4012,
15692 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15693 tek4015|tektronix 4015,
15694 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
15695 tek4014-sm|tektronix 4014 in small font,
15696 cols#121, lines#58,
15697 is2=\E\017\E\:, use=tek4014,
15698 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15699 tek4015-sm|tektronix 4015 in small font,
15700 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
15701 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
15703 # You need to have "stty nl2" in effect. Some versions of tset(1) know
15704 # how to set it for you.
15706 # It's got the Magic Cookie problem around stand-out mode. If you can't
15707 # live with Magic Cookie, remove the :so: and :se: fields and do without
15708 # reverse video. If you like reverse video stand-out mode but don't want
15709 # it to flash, change the letter 'H' to 'P' in the :so: field.
15710 tek4023|tektronix 4023,
15712 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
15713 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
15714 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
15715 rmso=^_@, smso=^_P,
15716 # It is recommended that you run the 4025 at 4800 baud or less;
15717 # various bugs in the terminal appear at 9600. It wedges at the
15718 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
15719 # on keyboard don't work. You have to hit BREAK twice to get
15720 # one break at any speed - this is a documented feature.
15721 # Can't use cursor motion because it's memory relative, and
15722 # because it only works in the workspace, not the monitor.
15723 # Same for home. Likewise, standout only works in the workspace.
15725 # <el> was commented out since vi and rogue seem to work better
15726 # simulating it with lots of spaces!
15728 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
15729 # and didn't seem necessary.
15731 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
15733 cols#80, it#8, lines#34, lm#0,
15734 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
15735 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
15736 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
15737 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
15738 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
15739 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
15740 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
15742 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15743 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
15744 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
15745 tek4025-17|tek 4025 17 line window,
15746 lines#17, use=tek4025,
15747 tek4025-17-ws|tek 4025 17 line window in workspace,
15748 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
15749 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
15750 smso=\037att e\r, use=tek4025-17,
15751 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
15752 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
15753 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15755 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
15756 # The following status modes are assumed for normal operation (replace the
15757 # initial "!" by whatever the current command character is):
15758 # !COM 29 # NOTE: changes command character to GS (^])
15764 # ^]STO 9 17 25 33 41 49 57 65 73
15765 # Other modes may be set according to communication requirements.
15766 # If the command character is inadvertently changed, termcap can't restore it.
15767 # Insert-character cannot be made to work on both top and bottom rows.
15768 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
15769 # There also seems to be a problem with vertical motion, perhaps involving
15770 # delete/insert-line, following a typed carriage return. This terminal sucks.
15771 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15772 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
15773 # work any more. -- esr)
15774 tek4025a|Tektronix 4025A,
15775 OTbs, OTpt, am, bw, da, db, xon,
15776 cols#80, it#8, lines#34,
15777 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
15778 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
15779 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
15780 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
15781 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
15782 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
15783 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
15784 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
15786 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
15787 # Here's the command file that I use to get rogue to work on the 4025.
15788 # It should work with any program using the old curses (e.g. it better
15789 # not try to scroll, or cursor addressing won't work. Also, you can't
15791 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
15792 tek4025-cr|tek 4025 for curses and rogue,
15794 cols#80, it#8, lines#33,
15795 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
15796 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
15797 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
15798 rmcup=\037wor 0, smcup=\037wor 33h,
15799 # next two lines commented out since curses only allows 128 chars, sigh.
15800 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
15801 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
15802 tek4025ex|4025ex|4027ex|tek 4025 w/!,
15803 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
15804 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
15805 tek4105|tektronix 4105,
15806 OTbs, am, mir, msgr, ul, xenl, xt,
15807 cols#79, it#8, lines#29,
15808 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
15809 clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
15810 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
15811 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15812 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
15813 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
15814 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
15815 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
15816 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
15817 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
15818 smul=\E[=5;<2m, tbc=\E[1g,
15820 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
15821 tek4105-30|4015 emulating 30 line vt100,
15822 am, mir, msgr, xenl, xon,
15823 cols#80, it#8, lines#30, vt#3,
15824 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15825 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15826 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15827 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15828 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15829 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15830 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
15831 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
15832 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
15833 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15834 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15835 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15836 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
15837 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15838 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15841 # Tektronix 4105 from BRL
15842 # The following setup modes are assumed for normal operation:
15843 # CODE ansi CRLF no DABUFFER 141
15844 # DAENABLE yes DALINES 30 DAMODE replace
15845 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
15846 # FLAGGING input INSERTREPLACE replace LFCR no
15847 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
15848 # SELECTCHARSET G1 0 TABS -2
15849 # Other setup modes may be set for operator convenience or communication
15850 # requirements; I recommend
15851 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
15852 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
15853 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
15854 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
15855 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
15856 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
15858 # and factory color maps. After setting these modes, save them with NVSAVE. No
15859 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15860 # "IC" cannot be used in combination with "im" & "ei".
15861 # "tek4105a" is just a guess:
15862 tek4105a|Tektronix 4105,
15863 OTbs, OTpt, msgr, xon,
15864 OTkn#8, cols#80, it#8, lines#30, vt#3,
15865 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15866 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
15867 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15868 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15869 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15870 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
15871 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15872 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
15873 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
15874 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15875 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
15876 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
15877 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
15878 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
15879 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15880 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
15881 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
15882 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15885 # Tektronix 4106/4107/4109 from BRL
15886 # The following setup modes are assumed for normal operation:
15887 # CODE ansi COLUMNMODE 80 CRLF no
15888 # DABUFFER 141 DAENABLE yes DALINES 32
15889 # DAMODE replace DAVISIBILITY yes ECHO no
15890 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
15891 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
15892 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
15894 # Other setup modes may be set for operator convenience or communication
15895 # requirements; I recommend
15896 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
15897 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
15898 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
15899 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
15900 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
15901 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
15903 # and factory color maps. After setting these modes, save them with NVSAVE. No
15904 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15905 # "IC" cannot be used in combination with "im" & "ei".
15906 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
15908 cols#80, it#8, lines#32, vt#3,
15909 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
15910 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
15911 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15912 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15913 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15914 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
15915 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
15916 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
15917 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
15918 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15919 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
15920 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
15921 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
15922 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
15923 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15924 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
15925 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
15926 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
15928 tek4107|tek4109|tektronix terminals 4107 4109,
15929 OTbs, am, mir, msgr, ul, xenl, xt,
15930 cols#79, it#8, lines#29,
15931 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
15932 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
15933 cub1=^H, cud1=^J, cuf1=\EC,
15934 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
15935 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
15936 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15937 rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
15938 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
15939 sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
15940 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
15941 smul=\E%!1\E[4m$<2>\E%!0,
15942 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
15943 # see the note attached to tek4207.
15944 tek4207-s|Tektronix 4207 with sysline but no memory,
15946 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
15947 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
15948 is2=\E7\E[?6l\E[2K\E[?6h\E8,
15949 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
15951 # The 4110 series may be a wonderful graphics series, but they make the 4025
15952 # look good for screen editing. In the dialog area, you can't move the cursor
15953 # off the bottom line. Out of the dialog area, ^K moves it up, but there
15954 # is no way to scroll.
15956 # Note that there is a floppy for free from Tek that makes the
15957 # 4112 emulate the vt52 (use the vt52 termcap). There is also
15958 # an expected enhancement that will use ANSI standard sequences.
15960 # 4112 in non-dialog area pretending to scroll. It really wraps
15961 # but vi is said to work (more or less) in this mode.
15963 # 'vi' works reasonably well with this entry.
15965 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
15968 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
15969 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
15970 # The 4112 with the ANSI compatibility enhancement
15971 tek4112|tek4114|tektronix 4110 series,
15974 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
15975 cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
15976 ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
15977 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
15978 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15979 tek4112-nd|4112 not in dialog area,
15981 cuu1=^K, use=tek4112,
15982 tek4112-5|4112 in 5 line dialog area,
15983 lines#5, use=tek4112,
15984 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
15985 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
15986 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
15987 # previously \0410 and \0411 sequences...I don't *think* they were supposed
15988 # to be 4-digit octal -- esr)
15989 tek4113|tektronix 4113 color graphics with 5 line dialog area,
15992 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
15993 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
15994 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
15995 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
15997 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
15998 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
15999 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
16000 # :vb: needs enough delay to let you see the background color being toggled.
16001 tek4113-nd|tektronix 4113 color graphics with no dialog area,
16003 cols#80, it#8, lines#34,
16004 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
16006 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
16007 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
16008 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
16009 # This entry is from Tek. Inc. (Brian Biehl)
16010 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
16011 otek4115|Tektronix 4115,
16012 OTbs, am, da, db, eo,
16013 cols#80, it#8, lines#34,
16014 cbt=\E[Z, clear=\E[H\E[2J,
16015 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
16016 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16017 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
16018 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
16020 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
16021 kbs=^H, ri=\EM, rmam=\E[?7l,
16022 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
16023 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
16024 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
16026 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
16029 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16030 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16031 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16032 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16033 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
16034 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
16035 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
16036 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
16037 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
16038 rmso=\E[m, rmul=\E[m,
16039 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
16040 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
16041 vpa=\E[%p1%{1}%+%dd,
16042 # The tek4125 emulates a vt100 incorrectly - the scrolling region
16043 # command is ignored. The following entry replaces <csr> with the needed
16044 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
16045 # chokes on; and adds a lot of initialization for the tek dialog area.
16046 # Note that this entry uses all 34 lines and sets the cursor color to green.
16047 # Steve Jacobson 8/85
16048 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
16049 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
16050 tek4125|tektronix 4125,
16052 csr@, dl1=\E[1M, il1=\E[1L,
16053 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16054 rc@, sc@, smkx=\E=, use=vt100,
16056 # From: <jcoker@ucbic>
16057 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
16058 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
16059 # note that if jcoker wasn't confused you may be able to use this one.
16060 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
16061 tek4207|Tektronix 4207 graphics terminal with memory,
16062 am, bw, mir, msgr, ul, xenl,
16063 cols#80, it#8, lines#32,
16064 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
16065 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16066 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
16067 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
16068 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
16069 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
16070 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
16071 rev=\E[7m, ri=\E[T,
16072 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
16073 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
16074 smul=\E[4m, tbc=\E[1g,
16076 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
16077 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
16078 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
16079 tek4404|tektronix 4404,
16081 cols#80, it#8, lines#32,
16082 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
16083 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
16084 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
16085 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
16086 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
16087 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
16088 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
16089 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
16090 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
16091 # Some unknown person wrote:
16092 # I added the is string - straight Unix has ESC ; in the login
16093 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
16094 # mode). The is string here cleans up a few things (but not
16096 ct8500|tektronix ct8500,
16099 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
16100 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
16101 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
16102 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
16103 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
16105 # Tektronix 4205 terminal.
16107 # am is not defined because the wrap around occurs not when the char.
16108 # is placed in the 80'th column, but when we are attempting to type
16109 # the 81'st character on the line. (esr: hmm, this is like the vt100
16110 # version of xenl, perhaps am + xenl would work!)
16112 # Bold, dim, and standout are simulated by colors and thus not allowed
16113 # with colors. The tektronix color table is mapped into the RGB color
16114 # table by setf/setb. All colors are reset to factory specifications by oc.
16115 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
16116 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
16117 # interval then maps into pre-defined value.
16118 tek4205|tektronix 4205,
16120 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
16121 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16122 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
16123 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
16124 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16125 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16126 dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
16127 ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
16128 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
16129 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
16130 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
16131 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
16132 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
16134 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
16135 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
16136 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
16137 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16138 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
16139 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
16140 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
16141 smul=\E[4m, tbc=\E[1g,
16143 #### Teletype (tty)
16145 # These are the hardcopy Teletypes from before AT&T bought the company,
16146 # clattering electromechanical dinosaurs in Bakelite cases that printed on
16147 # pulpy yellow roll paper. If you remember these you go back a ways.
16148 # Teletype-branded VDTs are listed in the AT&T section.
16150 # The earliest UNIXes were designed to use these clunkers; nroff and a few
16151 # other programs still default to emitting codes for the Model 37.
16154 tty33|tty35|model 33 or 35 teletype,
16157 bel=^G, cr=^M, cud1=^J, ind=^J,
16158 tty37|model 37 teletype,
16160 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16163 # There are known to be at least three flavors of the tty40, all seem more
16164 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
16165 # awful braindamage, such as printing a visible newline indicator after each
16166 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
16167 # braindamaged but has hope and is described here. The 40-4 is a 3270
16168 # lookalike and beyond hope. The terminal has visible bell but I don't know
16169 # it - it's null here to prevent it from showing the BL character.
16170 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
16171 # a "newline" style terminal (-crmode) vi figures all it needs is nl
16172 # to get crlf, even if <cr> is not ^M.)
16173 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
16174 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
16177 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
16178 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
16179 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
16180 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
16181 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
16182 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
16183 tty43|model 43 teletype,
16184 OTbs, am, hc, os, xon,
16186 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
16191 # You can add <is2=\E<> to put this 40-column mode, though I can't
16192 # for the life of me think why anyone would want to.
16193 scanset|sc410|sc415|Tymshare Scan Set,
16196 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
16197 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16198 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
16199 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
16200 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
16202 #### Volker-Craig (vc)
16204 # If you saw a Byte Magazine cover with a terminal on it during the early
16205 # 1980s, it was probably one of these. Carl Helmers liked them because
16206 # they could crank 19.2 and were cheap (that is, he liked them until he tried
16207 # to program one...)
16210 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
16211 # every other linefeed.
16212 vc303|vc103|vc203|volker-craig 303,
16215 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
16216 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
16217 kcuu1=^N, ll=\017$<1>W,
16218 vc303a|vc403a|volker-craig 303a,
16219 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
16220 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
16221 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
16222 vc404|volker-craig 404,
16225 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16226 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
16227 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
16228 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
16229 vc404-s|volker-craig 404 w/standout mode,
16230 cud1=^J, rmso=^O, smso=^N, use=vc404,
16231 # From: <wolfgang@cs.sfu.ca>
16232 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
16233 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
16236 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
16237 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
16238 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
16239 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
16240 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
16241 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
16242 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
16243 rmso=\E^_, smso=\E^Y,
16244 vc415|volker-craig 415,
16245 clear=^L, use=vc404,
16247 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
16250 #### IBM PC and clones
16253 # The pcplot IBM-PC terminal emulation program is really messed up. It is
16254 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
16255 # doesn't support scrolling regions, ignores add line commands, and ignores
16256 # delete line commands. Consequently, the resulting behavior looks like a
16257 # crude adm3a-type terminal.
16258 # Steve Jacobson 8/85
16259 pcplot|pc-plot terminal emulation program,
16261 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
16262 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
16263 # I've found that my KayPro II, running MDM730, continues to emulate an
16264 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
16265 # system the following termcap entry works well:
16266 # I have noticed a couple of minor glitches, but nothing I can't work
16267 # around. (I added two capabilities from the BRL entry -- esr)
16268 kaypro|kaypro2|kaypro II,
16271 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
16272 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
16273 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
16275 # From IBM, Thu May 5 19:35:27 1983
16276 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
16277 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
16280 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
16281 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
16283 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
16284 OTbs, am, bw, eo, hs, km, msgr, ul,
16285 cols#80, it#8, lines#24,
16286 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
16287 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
16288 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16289 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16290 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
16291 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
16292 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
16293 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16294 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
16295 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
16296 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
16297 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
16298 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
16299 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
16300 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
16304 # Apple II firmware console first, then various 80-column cards and
16305 # terminal emulators. For two cents I'd toss all these in the UFO file
16306 # along with the 40-column apple entries.
16309 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
16310 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
16311 # function of TIC, not the firmware.
16312 # The clear key on a IIgs will do something like clear-screen,
16313 # depending on what you're in.
16314 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
16315 OTbs, am, bw, eo, msgr,
16316 cols#80, it#8, lines#24,
16317 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
16318 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16319 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
16320 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
16322 # Apple //e with 80-column card, entry from BRL
16323 # The modem interface is permitted to discard LF (maybe DC1), otherwise
16324 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
16325 # Auto-wrap does not work right due to newline scrolling delay, which also
16326 # requires that you set "stty cr2".
16327 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
16328 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
16329 # using a terminal emulation program instead of the built-in firmware.
16333 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
16334 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
16335 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
16336 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16338 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
16339 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
16340 apple2e-p|Apple //e via Pascal,
16341 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
16342 kcud1=^J, use=apple2e,
16343 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
16344 # Enable DC3/DC1 flow control with "stty ixon -ixany".
16345 apple-ae|ASCII Express,
16346 OTbs, am, bw, msgr, nxon, xon,
16347 cols#80, it#8, lines#24,
16348 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
16349 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16350 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
16351 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
16353 appleII|apple ii plus,
16355 cols#80, it#8, lines#24,
16356 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
16357 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
16358 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
16359 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
16361 # Originally by Gary Ford 21NOV83
16362 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
16363 apple-80|apple II with smarterm 80 col,
16366 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
16367 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
16368 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
16369 apple-soroc|apple emulating soroc 120,
16372 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16373 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
16374 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16375 # From Peter Harrison, Computer Graphics Lab, San Francisco
16376 # ucbvax!ucsfmis!harrison .....uucp
16377 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
16378 # "These two work. If you don't have the inverse video chip for the
16379 # Apple with videx then remove the :so: and :se: fields."
16380 # (apple-videx: this used to be called DaleApple -- esr)
16381 apple-videx|Apple with videx videoterm 80 column board with inverse video,
16383 cols#80, it#8, lines#24,
16384 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
16385 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16386 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
16387 rmso=^Z2, sgr0=^Z2, smso=^Z3,
16388 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
16389 # Apple Cat ][ 212 modem, + more all
16390 # controlled by ASCII Express: Pro.
16391 # From Dave Shaver <isucs1!shaver>
16392 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
16395 acsc=, clear=^L, cuf1=^\,
16396 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16397 flash=^W35^W06, home=^Y,
16398 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
16400 apple-uterm|Ultraterm for Apple micros,
16403 acsc=, clear=^L, cuf1=^\,
16404 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16405 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
16406 # from trwrba!bwong (Bradley W. Wong):
16408 # This entry assumes that you are using an apple with the UCSD Pascal
16409 # language card. SYSTEM.MISCINFO is assumed to be the same as that
16410 # supplied with the standard apple except that screenwidth should be set
16411 # using SETUP to 80 columns. Note that the right arrow in not mapped in
16412 # this termcap entry. This is because that key, on the Apple, transmits
16413 # a ^U and would thus preempt the more useful "up" function of vi.
16416 apple80p|80-column apple with Pascal card,
16419 clear=^Y^L, cuf1=^\\:,
16420 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
16423 # Apple II+ equipped with Videx 80 column card
16425 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
16426 # manually converted by D A Gwyn
16428 # DO NOT use any terminal emulation with this data base, it works directly
16429 # with the Videx card. This has been tested with vi 1200 baud and works fine.
16431 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
16432 # 1 screen, while in R2 ^U doesn't.
16433 # For inverse alternate character set add:
16434 # <smacs>=^O:<rmacs>=^N:
16435 # (apple-v: added it#8 -- esr)
16436 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
16438 cols#80, it#8, lines#24,
16439 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
16440 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
16441 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
16442 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
16443 khome=^Y, rmso=^Z2, smso=^Z3,
16444 apple-videx3|vapple|Apple II with 80 col card,
16447 clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16448 cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16449 kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
16450 kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
16451 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
16452 aepro|Apple II+ running ASCII Express Pro--vt52,
16455 clear=\014$<300/>, cuf1=\EC,
16456 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16458 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
16459 apple-vm80|ap-vm80|apple with viewmax-80,
16462 clear=\014$<300/>, cuf1=^\\:,
16463 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
16464 ed=\013$<300/>, el=^], home=\031$<200/>,
16466 #### Apple Lisa & Macintosh
16469 # (lisa: changed <cvvis> to <cnorm> -- esr)
16470 lisa|apple lisa console display (black on white),
16471 OTbs, am, eo, msgr,
16472 cols#88, it#8, lines#32,
16473 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
16474 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
16475 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16476 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
16477 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16478 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
16479 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
16480 liswb|apple lisa console display (white on black),
16481 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
16482 smso=\E[m, smul=\E[4m, use=lisa,
16484 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
16485 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
16487 # These entries assume that the 'Auto Wraparound' is enabled.
16488 # Xon-Xoff flow control should also be enabled.
16490 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
16491 # settings are in non-volatile memory and don't need to be reset upon login.
16492 # Also setting the number of columns glitches the screen annoyingly.
16493 # You can type "reset" to get them set.
16495 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
16496 OTbs, OTpt, am, xenl, xon,
16497 OTkn#4, cols#80, it#8, lines#24, vt#3,
16498 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
16499 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16500 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16501 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
16502 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
16503 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
16504 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
16505 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16506 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
16507 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16509 # Lisaterm in 132 column ("wide") mode.
16510 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
16512 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
16513 # Although MacTerminal has insert/delete line, it is commented out here
16514 # since it is much faster and cleaner to use the "lock scrolling region"
16515 # method of inserting and deleting lines due to the MacTerminal implementation.
16516 # Also, the "Insert/delete ch" strings have an extra character appended to them
16517 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
16518 # supported by MacTerminal.
16519 mac|macintosh|Macintosh with MacTerminal,
16522 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
16523 # Lisaterm in 132 column ("wide") mode.
16524 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
16527 # The AppKit Terminal.app descriptions all have names beginning with
16528 # "nsterm". Note that the statusline (-s) versions use the window
16529 # titlebar as a phony status line, and may produce warnings during
16530 # compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
16531 # these warnings, or even ignore these entries entirely. Apps which
16532 # need to position the cursor or do other fancy stuff inside the status
16533 # line won't work with these entries. They're primarily useful for
16534 # programs like Pine which provide simple notifications in the status
16535 # line. Please note that non-ASCII characters don't work right in the
16536 # status line, since Terminal.app incorrectly interprets their Unicode
16537 # codepoints as MacRoman codepoints.
16539 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
16540 # "nsterm" to comply with the name length and case conventions and
16541 # limitations of various software packages [notably Solaris terminfo
16542 # and UNIX.] A single Apple_Terminal alias is retained for
16543 # backwards-compatbility.
16545 # * Added function key support (F1-F4). These only work in Terminal.app
16546 # version 51, hopefully the capabilities won't cause problems for people
16547 # using version 41.
16549 # * Added "full color" (-c) entries which support the 16-color mode in
16552 # * By default, version 51 uses UTF-8 encoding with broken altcharset
16553 # support, so "ASCII" (-7) entries without altcharset support were
16556 # nsterm - AppKit Terminal.app
16558 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
16559 # Terminal.app. It is a partial VT100 emulation with some xterm-like
16560 # extensions. This terminfo was written to describe versions 41
16561 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
16562 # version 10.1) of Terminal.app.
16564 # Terminal.app runs under the Mac OS X Quartz windowing system (and
16565 # other AppKit-supported windowing systems.) On the Mac OS X machine I
16566 # use, the executable for Terminal.app is:
16567 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
16569 # If you're looking for a description of the full-screen system
16570 # console which runs under Apple's Darwin operating system on PowerPC
16571 # platforms, see the "xnuppc" entry instead.
16573 # There were no function keys in version 41. In version 51, there are
16574 # four working function keys (F1, F2, F3 and F4.) The function keys
16575 # are included in all of these entries.
16577 # It does not support mouse pointer position reporting. Under some
16578 # circumstances the cursor can be positioned using option-click; this
16579 # works by comparing the cursor position and the selected position,
16580 # and simulating enough cursor-key presses to move the cursor to the
16581 # selected position. This technique fails in all but the simplest
16584 # It provides partial ANSI color support (background colors interacted
16585 # badly with bold in version 41, though, as reflected in :ncv:.) The
16586 # monochrome (-m) entries are useful if you've disabled color support
16587 # or use a monochrome monitor. The full color (-c) entries are useful
16588 # in version 51, which doesn't exhibit the background color bug. They
16589 # also enable an xterm-compatible 16-color mode.
16591 # The configurable titlebar is set using xterm-compatible sequences;
16592 # it is used as a status bar in the statusline (-s) entries. Its width
16593 # depends on font sizes and window sizes, but 50 characters seems to
16594 # be the default for an 80x24 window.
16596 # The MacRoman character encoding is used for some of the alternate
16597 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
16598 # disable alternate character set support entirely, and the "VT100"
16599 # (-acs) entries rely instead on Terminal.app's own buggy VT100
16600 # graphics emulation, which seems to think the character encoding is
16601 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
16602 # are useful in Terminal.app version 51, which supports UTF-8 and
16603 # other ASCII-compatible character encodings but does not correctly
16604 # implement VT100 graphics; once VT100 graphics are correctly
16605 # implemented in Terminal.app, the "VT100" (-acs) entries should be
16606 # usable in any ASCII-compatible character encoding [except perhaps
16607 # in UTF-8, where some experts argue for disallowing alternate
16608 # characters entirely.]
16610 # Terminal.app reports "vt100" as the terminal type, but exports
16611 # several environment variables which may aid detection in a shell
16612 # profile (i.e. .profile or .login):
16615 # TERM_PROGRAM=Apple_Terminal
16616 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
16617 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
16619 # For example, the following Bourne shell script would detect the
16620 # correct terminal type:
16622 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
16625 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
16629 # TERM="nsterm-c-7"
16633 # In a C shell derivative, this would be accomplished by:
16635 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
16636 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
16637 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
16638 # setenv TERM "nsterm"
16640 # setenv TERM "nsterm-c-7"
16645 # The '+' entries are building blocks
16646 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
16647 am, bw, msgr, xenl, xon,
16648 cols#80, it#8, lines#24,
16649 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16650 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
16651 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
16652 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16653 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
16654 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
16655 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16656 kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
16657 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16658 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16659 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
16660 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16661 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
16663 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
16664 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16665 enacs=\E(B\E)0, rmacs=^O,
16666 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
16667 smacs=^N, use=nsterm+7,
16669 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
16670 acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
16671 enacs=\E(B\E)0, rmacs=^O,
16672 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
16673 smacs=^N, use=nsterm+7,
16675 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
16678 dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
16680 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
16681 op=\E[0m, use=ibm+16color,
16683 nsterm+c41|AppKit Terminal.app v41 color support,
16684 colors#8, ncv#37, pairs#64,
16685 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16687 # These are different combinations of the building blocks
16689 # ASCII charset (-7)
16690 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
16693 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
16694 use=nsterm+s, use=nsterm+7,
16696 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
16697 use=nsterm+c41, use=nsterm+7,
16699 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
16700 use=nsterm+c, use=nsterm+7,
16702 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
16703 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
16705 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
16706 use=nsterm+s, use=nsterm+c, use=nsterm+7,
16708 # VT100 alternate-charset (-acs)
16709 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
16712 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
16713 use=nsterm+s, use=nsterm+acs,
16715 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
16716 use=nsterm+c41, use=nsterm+acs,
16718 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
16719 use=nsterm+c, use=nsterm+acs,
16721 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
16722 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
16724 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
16725 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
16728 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
16731 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
16732 use=nsterm+s, use=nsterm+mac,
16734 nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
16735 use=nsterm+c41, use=nsterm+mac,
16737 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
16738 use=nsterm+c, use=nsterm+mac,
16740 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
16741 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
16743 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
16744 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
16747 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
16748 # and D P Schreber comparing to nsterm-c-s-acs.
16750 # D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
16751 # defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
16752 # and that it is not set in Terminal's preferences dialog.
16753 nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
16754 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
16755 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16756 knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
16758 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
16760 # On PowerPC platforms, Apple's Darwin operating system uses a
16761 # full-screen system console derived from a NetBSD framebuffer
16762 # console. It is an ANSI-style terminal, and is not really VT-100
16765 # Under Mac OS X, this is the system console driver used while in
16766 # single-user mode [reachable by holding down Command-S during the
16767 # boot process] and when logged in using console mode [reachable by
16768 # typing ">console" at the graphical login prompt.]
16770 # If you're looking for a description of the Terminal.app terminal
16771 # emulator which runs under the Mac OS X Quartz windowing system (and
16772 # other AppKit-supported windowing systems,) see the "nsterm"
16775 # NOTE: Under Mac OS X version 10.1, the default login window does not
16776 # prompt for user name, instead requiring an icon to be selected from
16777 # a list of known users. Since the special ">console" login is not in
16778 # this list, you must make one of two changes in the Login Window
16779 # panel of the Login section of System Prefs to make the special
16780 # ">console" login accessible. The first option is to enable 'Show
16781 # "Other User" in list for network users', which will add a special
16782 # "Other..." icon to the graphical login panel. Selecting "Other..."
16783 # will present the regular graphical login prompt. The second option
16784 # is to change the 'Display Login Window as:' setting to 'Name and
16785 # password entry fields', which replaces the login panel with a
16786 # graphical login prompt.
16788 # There are no function keys, at least not in Darwin 1.3.
16790 # It has no mouse support.
16792 # It has full ANSI color support, and color combines correctly with
16793 # all three supported attributes: bold, inverse-video and underline.
16794 # However, bold colored text is almost unreadable (bolding is
16795 # accomplished using shifting and or-ing, and looks smeared) so bold
16796 # has been excluded from the list of color-compatible attributes
16797 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
16798 # monochrome monitor.
16800 # There is one serious bug with this terminal emulation's color
16801 # support: repositioning the cursor onto a cell with non-matching
16802 # colors obliterates that cell's contents, replacing it with a blank
16803 # and displaying a colored cursor in the "current" colors. There is
16804 # no complete workaround at present [other than using the monochrome
16805 # (-m) entries,] but removing the (msgr) capability seemed to help.
16807 # The "standout" chosen was simple reverse-video, although a colorful
16808 # standout might be more aesthetically pleasing. Similarly, the bold
16809 # chosen is the terminal's own smeared bold, although a simple
16810 # color-change might be more readable. The color-bold (-b) entries
16811 # uses magenta colored text for bolding instead. The fancy color (-f
16812 # and -f2) entries use color for bold, standout and underlined text
16813 # (underlined text is still underlined, though.)
16815 # Apparently the terminal emulator does support a VT-100-style
16816 # alternate character set, but all the alternate character set
16817 # positions have been left blank in the font. For this reason, no
16818 # alternate character set capabilities have been included in this
16819 # description. The console driver appears to be ASCII-only, so (enacs)
16820 # has been excluded [although the VT-100 sequence does work.]
16822 # The default Mac OS X and Darwin installation reports "vt100" as the
16823 # terminal type, and exports no helpful environment variables. To fix
16824 # this, change the "console" entry in /etc/ttys from "vt100" to
16825 # "xnuppc-WxH", where W and H are the character dimensions of your
16826 # console (see below.)
16828 # The font used by the terminal emulator is apparently one originally
16829 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
16830 # file includes descriptions for the following geometries:
16832 # Pixels Characters Entry Name (append -m for monochrome)
16833 # -------------------------------------------------------------------
16834 # 640x400 80x25 xnuppc-80x25
16835 # 640x480 80x30 xnuppc-80x30
16836 # 720x480 90x30 xnuppc-90x30
16837 # 800x600 100x37 xnuppc-100x37
16838 # 896x600 112x37 xnuppc-112x37
16839 # 1024x640 128x40 xnuppc-128x40
16840 # 1024x768 128x48 xnuppc-128x48
16841 # 1152x768 144x48 xnuppc-144x48
16842 # 1280x1024 160x64 xnuppc-160x64
16843 # 1600x1024 200x64 xnuppc-200x64
16844 # 1600x1200 200x75 xnuppc-200x75
16845 # 2048x1536 256x96 xnuppc-256x96
16847 # The basic "xnuppc" entry includes no size information, and the
16848 # emulator includes no reporting capability, so you'll be at the mercy
16849 # of the TTY device (which reports incorrectly on my hardware.) The
16850 # color-bold entries do not include size information.
16852 # The '+' entries are building blocks
16853 xnuppc+basic|Darwin PowerPC Console basic capabilities,
16854 am, bce, mir, xenl,
16856 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16857 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
16858 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16859 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
16860 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
16861 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
16862 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
16863 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
16865 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
16866 sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
16867 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
16869 xnuppc+c|Darwin PowerPC Console ANSI color support,
16870 colors#8, ncv#32, pairs#64,
16871 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16873 xnuppc+b|Darwin PowerPC Console color-bold support,
16876 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
16879 xnuppc+f|Darwin PowerPC Console fancy color support,
16881 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
16882 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
16884 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
16887 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
16888 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
16890 # Building blocks for specific screen sizes
16891 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
16894 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
16897 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
16900 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
16901 cols#100, lines#37,
16903 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
16904 cols#112, lines#37,
16906 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
16907 cols#128, lines#40,
16909 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
16910 cols#128, lines#48,
16912 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
16913 cols#144, lines#48,
16915 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
16916 cols#160, lines#64,
16918 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
16919 cols#200, lines#64,
16921 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
16922 cols#200, lines#75,
16924 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
16925 cols#256, lines#96,
16927 # These are different combinations of the building blocks
16929 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
16932 xnuppc|darwin|Darwin PowerPC Console (color),
16933 use=xnuppc+c, use=xnuppc+basic,
16935 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
16938 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
16939 use=xnuppc+b, use=xnuppc+c,
16941 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
16944 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
16945 use=xnuppc+f, use=xnuppc+c,
16947 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
16950 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
16951 use=xnuppc+f2, use=xnuppc+c,
16953 # Combinations for specific screen sizes
16954 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
16955 use=xnuppc+80x25, use=xnuppc+basic,
16957 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
16958 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
16960 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
16961 use=xnuppc+80x30, use=xnuppc+basic,
16963 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
16964 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
16966 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
16967 use=xnuppc+90x30, use=xnuppc+basic,
16969 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
16970 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
16972 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
16973 use=xnuppc+100x37, use=xnuppc+basic,
16975 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
16976 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
16978 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
16979 use=xnuppc+112x37, use=xnuppc+basic,
16981 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
16982 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
16984 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
16985 use=xnuppc+128x40, use=xnuppc+basic,
16987 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
16988 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
16990 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
16991 use=xnuppc+128x48, use=xnuppc+basic,
16993 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
16994 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
16996 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
16997 use=xnuppc+144x48, use=xnuppc+basic,
16999 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
17000 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
17002 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
17003 use=xnuppc+160x64, use=xnuppc+basic,
17005 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
17006 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
17008 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
17009 use=xnuppc+200x64, use=xnuppc+basic,
17011 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
17012 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
17014 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
17015 use=xnuppc+200x75, use=xnuppc+basic,
17017 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
17018 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
17020 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
17021 use=xnuppc+256x96, use=xnuppc+basic,
17023 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
17024 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
17026 #### Radio Shack/Tandy
17029 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
17030 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
17031 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
17032 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
17034 cols#80, it#8, lines#24,
17035 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
17036 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
17037 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
17038 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
17039 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
17040 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
17041 # (trs2: removed obsolete ":nl=^_:" -- esr)
17042 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
17044 cols#80, it#8, lines#24,
17045 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
17046 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
17047 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
17048 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
17049 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
17050 # (This had extension capabilities
17051 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
17052 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
17053 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
17054 trs16|trs-80 model 16 console,
17056 cols#80, it#8, lines#24,
17057 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
17058 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17059 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
17060 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
17061 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17062 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
17063 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
17064 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
17065 smacs=\ERG, smso=\ERD,
17070 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
17073 cols#80, it#8, lines#25,
17074 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
17075 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
17076 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
17077 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
17078 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
17079 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
17080 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
17082 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
17084 # MiNT VT52 emulation. 80 columns, 25 rows.
17085 # MiNT is Now TOS, the operating system which comes with all Ataris now
17086 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
17087 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
17088 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
17089 st52|Atari ST with VT52 emulation,
17092 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
17093 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17094 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
17095 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
17096 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
17097 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
17098 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
17099 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
17100 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
17101 smcup=\Ee, smso=\Ep,
17103 #### Commodore Business Machines
17105 # Formerly located in West Chester, PA; went spectacularly bust in 1994
17106 # after years of shaky engineering and egregious mismanagement. Made one
17107 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
17108 # C-128, VIC-20). The C-64 is said to have been the most popular machine
17109 # ever (most units sold); they can still be found gathering dust in closets
17113 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
17114 # Added a few more entries, converted caret-type control sequence (^x) entries
17115 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
17116 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
17118 # :as:, :ae: Support for alternate character sets.
17119 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
17120 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
17121 # This one appears to fix a problem I always had with a line ending
17122 # at 'width+1' (I think) followed by a blank line in vi. The blank
17123 # line tended to disappear and reappear depending on how the screen
17124 # was refreshed. Note that this is probably needed only if you use
17125 # something like a Dnet Fterm with the window sized to some peculiar
17126 # dimension larger than 80 columns.
17127 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
17128 # (amiga: removed obsolete :kn#10:,
17129 # also added empty <acsc> to suppress a warning --esr)
17131 OTbs, am, bw, xenl,
17133 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
17134 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
17135 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
17136 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
17137 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17138 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
17139 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
17140 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
17141 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
17142 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
17143 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
17144 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
17145 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17147 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
17148 # (amiga: added empty <acsc> to suppress a warning.
17149 # I'm told this entry screws up badly with AS225, the Amiga
17150 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
17151 amiga-h|Hans Verkuil's Amiga ANSI,
17154 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
17155 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
17156 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
17157 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
17158 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
17159 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
17160 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
17161 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
17162 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17163 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
17164 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
17165 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
17166 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
17167 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
17168 smso=\2337m, smul=\2334m,
17170 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
17172 # Pavel Fedin added
17177 amiga-8bit|Amiga ANSI using 8-bit controls,
17178 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17179 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
17180 kpp=\233T, ri=\215, rin@, use=amiga-h,
17182 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
17183 # requires use of appropriate preferences settings.
17184 amiga-vnc|Amiga using VNC console (black on light gray),
17185 am, da, db, msgr, ndscr,
17186 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
17187 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
17188 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
17189 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17190 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17191 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17192 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
17193 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
17194 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
17195 indn=\E[%p1%dS, invis=\E8m,
17196 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17197 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17198 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
17199 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
17200 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
17201 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
17202 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
17203 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
17204 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
17205 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
17206 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
17207 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
17208 smso=\E[1m, smul=\E[4m,
17210 # MorphOS on Genesi Pegasos
17211 # By Pavel Fedin <sonic_amiga@rambler.ru>
17213 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
17214 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
17215 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
17216 ri=\215, rin@, use=amiga-h,
17218 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
17219 # I'm trying to write a termcap for a commodore b-128, and I'm
17220 # having a little trouble. I've had to map most of my control characters
17221 # to something that unix will accept (my delete-char is a ctrl-t, etc),
17222 # and create some functions (like cm), but thats life.
17223 # The problem is with the arrow keys - right, and up work fine, but
17224 # left deletes the previous character and down I just can't figure out.
17225 # Jove knows what I want, but I don't know what it's sending to me (it
17226 # isn't thats bound to next-line in jove).
17227 # Anybody got any ideas? Here's my termcap.
17228 # DAG -- I changed his "^n" entries to "\n"; see if that works.
17230 commodore|b-128|Commodore B-128 micro,
17232 OTdN#20, cols#80, lines#24, pb#150,
17233 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
17234 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
17235 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
17236 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
17237 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
17242 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
17243 northstar|North Star Advantage,
17247 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
17248 el=\016$<200/>, home=\034\032$<200/>,
17252 # Thu Jul 7 03:55:16 1983
17254 # As an aside, be careful; it may sound like an anomaly on the
17255 # Osborne, but with the 80-column upgrade, it's too easy to
17256 # enter lines >80 columns!
17258 # I've already had several comments...
17259 # The Osborne-1 with the 80-col option is capable of being
17260 # 52, 80, or 104 characters wide; default to 80 for compatibility
17261 # with most systems.
17263 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
17264 osborne-w|osborne1-w|osborne I in 104-column mode,
17266 cols#104, lines#24,
17267 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17268 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17269 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
17270 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
17271 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
17272 osborne|osborne1|osborne I in 80-column mode,
17273 OTbs, am, mir, msgr, ul, xhp,
17274 OTdB#4, cols#80, lines#24,
17275 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
17276 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17277 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
17278 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
17279 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
17281 # Osborne Executive definition from BRL
17282 # Similar to tvi920
17283 # Added by David Milligan and Tom Smith (SMU)
17284 osexec|Osborne executive,
17286 OTug#1, cols#80, lines#24, xmc#1,
17287 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17288 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17289 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
17290 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
17291 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
17292 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
17293 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
17296 #### Console types for obsolete UNIX clones
17298 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
17299 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
17300 # were commercial, Minix an educational tool sold in conjunction with a book.
17301 # Memory-segmentation limits and a strong tendency to look like V7 long after
17302 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
17303 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
17304 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
17305 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
17306 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
17307 # even as single processes under SunOS and the Macintosh OS.
17310 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
17311 minix|minix console (v1.7),
17313 cols#80, it#8, lines#25,
17314 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17315 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17316 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17317 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17318 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17319 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17320 is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17321 kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
17322 kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
17323 lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
17324 rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17325 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
17326 minix-old|minix console (v1.5),
17328 cols#80, it#8, lines#25,
17329 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
17330 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17331 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17332 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17333 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
17334 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
17335 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17336 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
17337 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
17338 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
17339 # The linewrap option can be specified by editing /usr/include/minix/config.h
17340 # before recompiling the minix 1.5 kernel.
17341 minix-old-am|minix console with linewrap,
17344 pc-minix|minix console on an Intel box,
17345 use=klone+acs, use=minix,
17347 # According to the Coherent 2.3 manual, the PC console is similar
17348 # to a z19. The differences seem to be (1) 25 lines, (2) no status
17349 # line, (3) standout is broken, (4) ins/del line is broken, (5)
17350 # has blinking and bold.
17351 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
17353 cols#80, it#8, lines#25,
17354 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
17355 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
17356 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
17357 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
17358 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
17360 # According to the Venix 1.1 manual, the PC console is similar
17361 # to a DEC vt52. Differences seem to be (1) arrow keys send
17362 # different strings, (2) enhanced standout, (3) added insert/delete line.
17363 # Note in particular that it doesn't have automatic margins.
17364 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
17365 # not described here because this derives from an old termcap entry.
17366 pc-venix|venix|IBM PC console running Venix,
17367 cols#80, it#8, lines#25,
17368 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17369 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
17370 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
17371 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
17373 #### Miscellaneous microcomputer consoles
17375 # If you know anything more about any of these, please tell me.
17378 # The MAI Basic Four computer was obsolete at the end of the 1980s.
17379 # It may be used as a terminal by putting it in "line" mode as seen on
17380 # one of the status lines.
17381 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
17382 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
17383 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
17384 # used \ED instead.
17385 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
17386 mai|basic4|MAI Basic Four in ansi mode,
17387 am, da, db, mir, msgr,
17388 cols#82, it#8, lines#25,
17389 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
17390 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
17391 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
17392 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
17393 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
17394 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
17395 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17396 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
17397 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
17398 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17399 smir=\E[4h, smso=\E[7m, smul=\E[4m,
17400 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
17401 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
17403 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
17404 # The Basis 108 was a Apple II clone, manufactured by the "Basis
17405 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
17406 # about 1,5 km from where I live, but doesn't build own computers any
17407 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
17408 # equipped with one or two 5.25" disk drives, had a monochrome and colour
17409 # video output for a TV set or a dedicated monitor and several slots for
17410 # Apple II cards. Basis 108 were quite popular at german schools before
17411 # the advent of the IBM PC. They run, for example, the UCSD Pascal
17412 # development system (which I used even in 1993 to program the steering
17413 # and data recording for our school's experimental solar panel :), Apple DOS
17415 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
17416 basis|BASIS108 computer with terminal translation table active,
17417 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
17418 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
17419 smso=\E(, use=adm3a,
17420 # luna's BMC terminal emulator
17421 luna|luna68k|LUNA68K Bitmap console,
17422 cols#88, lines#46, use=ansi-mini,
17423 megatek|pegasus workstation terminal emulator,
17426 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
17427 # interface (pre-Macintosh by several years) that went nowhere.
17428 xerox820|x820|Xerox 820,
17431 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
17432 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
17435 #### Videotex and teletext
17438 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
17439 # \E[?3l 80 columns
17440 # \E[?4l scrolling on
17441 # \E[12h local echo off
17442 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
17443 # \E)0 G1 DEC set (line graphics)
17445 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
17446 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
17447 OTbs, eslok, hs, xenl,
17448 cols#80, it#8, lines#24, wsl#72, xmc#0,
17449 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
17450 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
17451 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17452 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17453 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17454 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17455 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
17456 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
17457 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
17458 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
17459 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
17460 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
17461 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
17462 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
17463 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
17464 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
17465 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
17466 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
17467 u6=\E[%i%d;%dR, u7=\E[6n,
17469 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
17471 minitel1|minitel 1,
17472 am, bw, eslok, hs, hz, msgr,
17473 colors#8, cols#40, lines#24, pairs#8,
17474 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
17475 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17476 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
17477 enacs=^Y, fsl=^J, home=^^, ind=^J,
17478 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
17479 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
17480 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
17481 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
17482 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
17483 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
17484 minitel1b|minitel 1-bistandard (in 40cols mode),
17486 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
17487 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17488 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
17489 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
17490 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17491 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
17492 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
17493 # <rmkx> posait des problemes (logout en sortant de vi).
17494 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
17496 colors@, cols#80, it#8, pairs@,
17497 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
17498 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
17499 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
17500 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
17501 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
17502 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
17503 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
17504 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
17505 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
17507 ######## OBSOLETE VDT TYPES
17509 # These terminals are *long* dead -- these entries are retained for
17510 # historical interest only.
17512 #### Amtek Business Machines
17515 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
17516 # but these caps were commented out in 8.3; also, removed overridden
17517 # ":do=^J:" -- esr)
17518 abm80|amtek business machines 80,
17521 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
17522 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
17523 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
17525 #### Bell Labs blit terminals
17527 # These were AT&T's official entries. The 5620 FAQ maintained by
17528 # David Breneman <daveb@dgtl.com> has this to say:
17530 # Actually, in the beginning was the Jerq, and the Jerq was white with a
17531 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
17532 # was good. But lo, upon the horizon loomed a mighty management-type person
17533 # (known now only by the initials VP) who said, the mighty Jerq must stay
17534 # alone, and could not go forth into the world. So Locanthi and Pike put the
17535 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
17536 # world. And the Jerq lived the rest of its days in research, but never
17537 # strayed from those paths.
17539 # In all seriousness, the Blit was originally known as the Jerq, but when
17540 # it started to be shown outside of the halls of the Bell Labs Research
17541 # organization, the management powers that be decided that the name could
17542 # not remain. So it was renamed to be Blit. This was in late 1981.
17544 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
17548 blit|jerq|blit running teletype rom,
17550 cols#87, it#8, lines#72,
17551 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17552 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
17553 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
17554 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
17555 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
17556 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
17558 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
17559 cbblit|fixterm|blit running columbus code,
17561 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
17562 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
17563 smul=\EU", use=blit,
17565 oblit|ojerq|first version of blit rom,
17566 am, da, db, eo, mir, ul, xon,
17567 cols#88, it#8, lines#72,
17568 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
17569 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
17570 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
17571 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
17574 #### Bolt, Beranek & Newman (bbn)
17576 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
17577 # The parent company, best known as the architects of the Internet, is
17580 # Jeff DelPapa <dp@world.std.com> writes:
17581 # The bitgraph was a large white box that contained a monochrome bitmap
17582 # display, and a 68000 to run it. You could download code and run it on
17583 # the cpu, it had 128kb (I think) of memory. I used one in the late
17584 # 70's, sure beat a vt100. It had one strange feature tho -- it used
17585 # the cpu to bitblt pixels to scroll, it took longer than the refresh
17586 # rate, and looked like a rubber sheet stretching, then snapping
17587 # upwards. It had everything the early mac had, except a floppy drive a
17588 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
17589 # Beranek and Neuman) sold at most a few hundred of them to the real
17590 # world. DOD may have bought more...
17593 # Entries for the BitGraph terminals. The problem
17594 # with scrolling in vi can only be fixed by getting BBN to put
17595 # smarter scroll logic in the terminal or changing vi or padding
17596 # scrolls with about 500 ms delay.
17598 # I always thought the problem was related to the terminal
17599 # counting newlines in its input buffer before scrolling and
17600 # then moving the screen that much. Then vi comes along and
17601 # paints lines in on the bottom line of the screen, so you get
17602 # this big white gap.
17604 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
17605 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17607 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
17608 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17610 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
17613 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
17614 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17615 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
17616 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
17617 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
17618 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
17619 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
17620 sgr0=\E[m, smkx=\E=, smso=\E[7m,
17622 bg1.25rv|bbn bitgraph 1.25 (reverse video),
17623 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
17625 bg1.25nv|bbn bitgraph 1.25 (normal video),
17626 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
17628 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
17629 bg1.25|bbn bitgraph 1.25,
17631 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
17632 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
17633 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
17634 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
17635 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
17636 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
17637 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
17640 #### Bull (bq, dku, vip)
17642 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
17644 #============================================#
17645 # BULL QUESTAR 210 `SDP' terminals emulation #
17646 #============================================#
17648 # Description written by R.K.Saunders (Bull Transac)
17650 # Modifications written by F. Girard (Bull MTS)
17651 # 19-05-87 V02.00.01
17652 # 17-12-87 V02.00.02
17653 # 15-09-89 V02.00.05
17655 # Typical technical selections F1 (modes SDP/ROLL):
17656 # -------------------------------------------------------
17657 # | 01 02 03 04 05 06 07 08 09 10 |
17658 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
17660 # | 11 12 13 14 15 16 17 18 19 20 |
17661 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
17663 # | 21 22 23 24 25 26 27 28 29 30 |
17664 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
17666 # | 31 32 33 34 35 36 37 38 39 40 |
17667 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
17668 # -------------------------------------------------------
17669 # Typical firmware identification F5 "etat 6":
17670 # P287.02.04b (AZERTY)
17671 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
17672 # P298.03.03 (monochrome) or P374.03.02 (colour)
17674 # SM SDP mode (VIP command): ^[[?=h
17675 # RIS (erases screen): ^[c
17676 # DMI disable keyboard: ^[`
17677 # SM double rendition mode: ^[[?>h
17678 # RM solicited status mode: ^[[5l
17679 # RM character mode: ^[[>l
17680 # RM echoplex mode: ^[[12l
17681 # RM column tab mode: ^[[18l
17682 # RM forbid SS2 keyboard mode: ^[[?<l
17683 # SM scroll mode: ^[[=h
17684 # FCF enable XON/XOFF: ^[P1s^[\
17685 # MTL select end msg character: ^[[^Wp
17686 # EMI enable keyboard: ^[b
17687 # RIS retour etat initial: ^[c
17688 # enable FC keypad: ^[[?<h,
17689 # MPW map status line window: ^[PY99:98^[\
17690 # SCP select status line: ^[[0;98v
17691 # ED erase entire partition: ^[[2J
17692 # SCP select main partition: ^[[v
17693 # SM character insertion mode: ^[[4h
17694 # RM character replacement mode: ^[[4l
17695 # COO cursor on: ^[[r
17696 # COO cursor off: ^[[1r
17697 # SGR dim (turquoise) rev attr: ^[[2;7m
17698 # SGR Data normal attr: ^[[m
17699 # SO Line-graphic mode ON: ^N
17700 # SI Line-graphic mode OFF: ^O
17701 # MC start routing to printer: ^[[5i
17702 # MC stop routing to printer: ^M^[[4i
17705 # This entry covers the following terminals:
17706 # dku7102, tws2102, and tws models 2105 to 2112
17707 tws-generic|dku7102|Bull Questar tws terminals,
17708 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
17709 cols#80, it#8, lines#24, wsl#80,
17710 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
17711 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
17712 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
17713 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
17714 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17715 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
17716 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
17717 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
17718 il1=\E[L, ind=^J, invis=\E[0;8m,
17719 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
17720 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
17721 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
17722 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
17723 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
17724 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
17725 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
17726 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
17727 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
17728 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
17729 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
17730 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
17731 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
17732 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
17733 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
17734 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
17735 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
17737 tws2103|xdku|BULL Questar tws2103,
17738 ht=^I, use=tws-generic,
17739 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
17740 ht=^I, use=tws2102-sna,
17741 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
17742 clear=\E[2J\E[H, cup@, dl@, dl1@,
17743 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
17744 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
17746 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
17747 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
17748 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
17750 #=========================================================#
17751 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
17752 #=========================================================#
17754 # Description written by J. Staerck (BULL SA)
17755 # Copyright (c) 1989 BULL SA
17756 #---------------------------------------------------------------------------
17757 # This entry is used for terminals with vt320 emulation mode
17758 # and following set-up :
17759 # 8 bit ISO Latin Character Set (ISO 8859-1),
17760 # 7 bit Control Characters,
17761 # 80 columns screen.
17762 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
17763 # They are used in string capabilities with vt220-320 emulation mode.
17764 # In the following DEC definitions, two kinds of terminfo databases are
17766 # 1. the first with Command Sequence Introducer starting with escape
17767 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
17768 # 2. the second with Command Sequence Introducer starting with escape
17769 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
17770 # Soft Terminal Reset esc [ ! p
17771 # RIS (erases screen): esc c
17772 # DECKPNM numeric keypad mode: esc >
17773 # DECKPAM applic. keypad mode: esc =
17774 # DECSTBM Scrolling region: esc [ r
17775 # SCS select G0 = US: esc ( B
17776 # SCS select G1 = line-graphic: esc ) 0
17777 # Select 7-bit C1 controls: esc sp F
17778 # Select 8-bit C1 controls: esc sp G
17779 # Select cursor home: esc [ H
17780 # Select erase screen: esc [ J
17781 # SM KAM lock keyboard: esc [ 2 h
17782 # RM KAM unlock keyboard: esc [ 2 l
17783 # SM SRM local echo off: esc [ 1 2 h
17784 # RM SRM local echo on: esc [ 1 2 l
17785 # SM LNM New line : esc [ 2 0 h
17786 # RM LNM return = CR only: esc [ 2 0 l
17787 # SM DECCKM cursor keys mode: esc [ ? 1 h
17788 # RM DECCKM appli. keys mode: esc [ ? 1 l
17789 # SM DECANM ANSI mode on: esc [ ? 2 h
17790 # RM DECANM ANSI mode off: esc [ ? 2 l
17791 # SM DECCOLM 132-column screen: esc [ ? 3 h
17792 # RM DECCOLM 80-column screen: esc [ ? 3 l
17793 # SM DECSCLM Smooth scroll: esc [ ? 4 h
17794 # RM DECSCLM Jump scroll: esc [ ? 4 l
17795 # SM DECSCNM screen light backgr. esc [ ? 5 h
17796 # RM DECSCNM screen dark backgr. esc [ ? 5 l
17797 # SM DECOM move within margins: esc [ ? 6 h
17798 # RM DECOM move outside margins: esc [ ? 6 l
17799 # SM DECAWM auto right margin: esc [ ? 7 h
17800 # RM DECAWM auto right margin: esc [ ? 7 l
17801 # SM DECARM auto repeat: esc [ ? 8 h
17802 # RM DECARM auto repeat: esc [ ? 8 l
17803 # DECSASD Select active main: esc [ 0 $ }
17804 # DECSASD Select active status: esc [ 1 $ }
17805 # DECSSDT Select status none: esc [ 0 $ ~
17806 # DECSSDT Select status indic.: esc [ 1 $ ~
17807 # DECSSDT Select status host-wr: esc [ 2 $ ~
17808 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
17809 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
17810 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
17811 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
17812 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
17813 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
17814 # SM DECKBUM clavier informatique esc [ ? 6 8 h
17815 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
17816 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
17817 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
17818 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
17819 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
17820 # Char. and Line attributes: esc [ Ps ... Ps m
17821 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
17822 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
17825 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
17826 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
17827 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
17828 cols#80, it#8, lines#24, vt#3, wsl#80,
17829 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17830 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17831 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
17832 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17833 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17834 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17835 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17836 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
17837 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
17838 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
17839 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17840 is1=\E[63;1"p\E[2h,
17841 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17842 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
17843 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
17844 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
17845 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
17846 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
17847 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
17848 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17849 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17850 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
17851 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17852 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
17853 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
17854 rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
17855 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
17856 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
17857 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
17858 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
17859 bq300-rv|Bull vt320 reverse 80 columns,
17860 flash=\E[?5l$<50>\E[?5h,
17861 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17863 bq300-w|Bull vt320 132 columns,
17865 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17866 rs2=\E[?3h, use=bq300,
17867 bq300-w-rv|Bull vt320 reverse mode 132 columns,
17869 flash=\E[?5l$<50>\E[?5h,
17870 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17871 rs2=\E[?3h, use=bq300,
17873 # This entry is used for terminals with vt320 emulation mode
17874 # and following set-up :
17875 # 8 bit ISO Latin Character Set (ISO 8859-1),
17876 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
17877 # 80 columns screen.
17878 # Soft Terminal Reset csi ! p
17879 # RIS (erases screen): esc c
17880 # DECKPNM numeric keypad mode: esc >
17881 # DECKPAM applic. keypad mode: esc =
17882 # DECSTBM Scrolling region: esc [ r
17883 # SCS select G0 = US: esc ( B
17884 # SCS select G1 = line-graphic: esc ) 0
17885 # Select 7-bit C1 controls: esc sp F
17886 # Select 8-bit C1 controls: esc sp G
17887 # Select cursor home: csi H
17888 # Select erase screen: csi J
17889 # SM KAM lock keyboard: csi 2 h
17890 # RM KAM unlock keyboard: csi 2 l
17891 # SM SRM local echo off: csi 1 2 h
17892 # RM SRM local echo on: csi 1 2 l
17893 # SM LNM New line : csi 2 0 h
17894 # RM LNM return = CR only: csi 2 0 l
17895 # SM DECCKM cursor keys mode: csi ? 1 h
17896 # RM DECCKM appli. keys mode: csi ? 1 l
17897 # SM DECANM ANSI mode on: csi ? 2 h
17898 # RM DECANM ANSI mode off: csi ? 2 l
17899 # SM DECCOLM 132-column screen: csi ? 3 h
17900 # RM DECCOLM 80-column screen: csi ? 3 l
17901 # SM DECSCLM Smooth scroll: csi ? 4 h
17902 # RM DECSCLM Jump scroll: csi ? 4 l
17903 # SM DECSCNM screen light backgr. csi ? 5 h
17904 # RM DECSCNM screen dark backgr. csi ? 5 l
17905 # SM DECOM move within margins: csi ? 6 h
17906 # RM DECOM move outside margins: csi ? 6 l
17907 # SM DECAWM auto right margin: csi ? 7 h
17908 # RM DECAWM auto right margin: csi ? 7 l
17909 # SM DECARM auto repeat: csi ? 8 h
17910 # RM DECARM auto repeat: csi ? 8 l
17911 # DECSASD Select active main: csi 0 $ }
17912 # DECSASD Select active status: csi 1 $ }
17913 # DECSSDT Select status none: csi 0 $ ~
17914 # DECSSDT Select status indic.: csi 1 $ ~
17915 # DECSSDT Select status host-wr: csi 2 $ ~
17916 # SM DECTCEM Visible cursor: csi ? 2 5 h
17917 # RM DECTCEM Invisible cursor: csi ? 2 5 l
17918 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
17919 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
17920 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
17921 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
17922 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
17923 # Char. and Line attributes: csi Ps ... Ps m
17924 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
17925 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
17926 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
17927 bq300-8|Bull vt320 full 8 bits 80 columns,
17928 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
17929 cols#80, it#8, lines#24, vt#3, wsl#80,
17930 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17931 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
17932 clear=\233H\233J, cnorm=\233?25h, cr=^M,
17933 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
17934 cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
17935 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
17936 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
17937 el=\233K, el1=\2331K, enacs=\E(B\E)0,
17938 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
17939 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
17940 is1=\E[63;2"p\E[2h,
17941 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17942 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
17943 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
17944 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
17945 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
17946 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
17947 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
17948 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
17949 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
17950 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
17951 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
17952 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
17953 rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
17954 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
17955 rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
17956 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
17957 sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
17958 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
17959 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
17960 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
17961 flash=\233?5l$<50>\233?5h,
17962 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17964 bq300-8w|Bull vt320 8-bit 132 columns,
17966 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17967 rs2=\233?3h, use=bq300-8,
17968 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
17970 flash=\233?5l$<50>\233?5h,
17971 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
17972 rs2=\233?3h, use=bq300-8,
17974 # This entry is used for terminals with vt320 emulation mode
17975 # a 102 keys keyboard (PC scancode !) and following set-up :
17976 # 8 bit ISO Latin Character Set (ISO 8859-1),
17977 # 7 bit Control Characters,
17978 # 80 columns screen.
17979 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
17980 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
17981 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
17982 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
17983 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
17984 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17985 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
17986 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
17987 flash=\E[?5l$<50>\E[?5h,
17988 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17990 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
17992 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17993 rs2=\E[?3h, use=bq300-pc,
17994 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
17996 flash=\E[?5l$<50>\E[?5h,
17997 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
17998 rs2=\E[?3h, use=bq300-pc,
17999 # 8 bit ISO Latin Character Set (ISO 8859-1),
18000 # 8 bit Control Characters,
18001 # 80 columns screen.
18002 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
18003 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
18004 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
18005 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
18006 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
18007 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
18008 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
18009 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
18010 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
18011 flash=\E[?5l$<50>\E[?5h,
18012 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18014 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
18016 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18017 rs2=\E[?3h, use=bq300-8-pc,
18018 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
18020 flash=\E[?5l$<50>\E[?5h,
18021 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
18022 rs2=\E[?3h, use=bq300-8-pc,
18024 #======================================================#
18025 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
18026 #======================================================#
18028 # normal mode, 8 bits, 80 columns terminal.
18030 # RIS reset initial state: ^[c
18031 # BLE bell enable ^[h
18032 # BLD bell disable ^[g
18033 # CAMS char. attr. mode set ^[[D
18034 # CAMR char. attr. mode reset ^[[G
18036 # KBU keyboard unlock (set) ^[[W
18037 # KBL keyboard lock (reset) ^[[X
18038 # CM character mode (async.) ^[k
18039 # NEP non echoplex mode (by host) ^[l
18040 # EP echoplex mode (by host) ^[m
18041 # IM insert mode set ^[[I
18042 # IM insert mode reset ^[[J
18043 # RMS roll mode set ^[r
18044 # RMR roll mode reset ^[q
18045 # SM78 set mode vip7800 ^[[1q
18046 # SD scroll up (72 lines) ^[[0s
18047 # SD scroll down (72 lines) ^[[1s
18048 # RBM block mode reset ^[[E
18049 # SLS status line set ^[w
18050 # SLR status line reset ^[v
18051 # SLL status line lock ^[O
18052 # LGS Line-graphic mode set ^[G
18053 # LGR Line-graphic mode reset ^[F
18054 # TBC tab clear (at cursor pos.) ^[[g
18055 # TBI tab initialize ^[[N
18056 # TBS tab set (at cursor pos.) ^[p
18057 # PDS print data space ^[[0p
18058 # PHD print host data ^[[3p
18059 # PDT print data terminator ^[[<p
18060 # PRES print adapter reset ^[[2p
18061 # SSPR multi-part. reset ^[[<>u
18062 # SSP0 partition 0 set ^[[00u
18063 # SSP1 partition n format 1 ^[[PnPnSTRINGu
18064 # SSP2 partition n format 2 ^[[PnPnSTRINGu
18065 # SSP3 partition n format 3 ^[[PnPnu
18066 # ATR attribute (visual)
18069 # hide (blank) : ^[sH
18071 # inverse video : ^[sI
18076 # This covers the vip7800 and BQ3155-vip7800
18077 vip|Bull Questar 3155-7800,
18078 am, eslok, hs, km, mc5i, msgr, xenl, xon,
18079 cols#80, it#8, lines#24, vt#3, wsl#80,
18080 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
18081 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18082 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
18083 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
18084 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
18085 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
18086 is2=\E[00u\E[<>001001024080024080u\E[01u,
18087 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
18088 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
18089 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
18090 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
18091 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
18092 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
18093 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
18094 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
18095 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
18096 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
18097 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
18098 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
18099 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
18100 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
18101 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
18102 smul=\Es_, tbc=\E[N, tsl=\Ew,
18103 # normal screen, 8 bits, 132 columns terminal.
18104 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
18106 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
18107 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
18109 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
18110 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
18111 cols#132, lines#72, wsl#132,
18112 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
18117 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
18118 # that is smaller than the screen, and puts up a warning message
18119 # outside the window. Te erases the warning message, puts the
18120 # window back to be the whole screen, and puts the cursor at just
18121 # below the small window. I defined <cnorm> and <civis> to really turn
18122 # the cursor on and off, but I have taken this out since I don't
18123 # like the cursor being turned off when vi exits.
18124 cg7900|chromatics|chromatics 7900,
18127 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
18128 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
18129 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
18130 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
18131 rmso=\001C1\,\001c2\,,
18132 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
18133 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
18135 #### Computer Automation
18138 ca22851|computer automation 22851,
18141 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
18142 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
18143 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
18148 # This entry has correct padding and the undocumented "ri" capability
18149 cyb83|xl83|cybernex xl-83,
18152 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18153 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
18154 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
18155 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
18156 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
18157 cyb110|mdl110|cybernex mdl-110,
18160 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18161 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18162 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
18163 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
18164 ht=\011$<43>, ich1=\016A\035$<3.5>,
18165 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
18169 # Datapoint is gone. They used to be headquartered in Texas.
18170 # They created ARCnet, an Ethernet competitor that flourished for a while
18171 # in the early 1980s before 3COM got wise and cut its prices. The service
18172 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
18175 dp3360|datapoint|datapoint 3360,
18178 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
18179 ed=^_, el=^^, home=^], ind=^J,
18181 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
18182 # The Datapoint 8242 Workstation was sold at least between 1985
18183 # and 1989. To make the terminal work with this entry, press
18184 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
18185 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
18186 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
18187 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
18188 # fact unusable because the strings sent by the terminal conflict
18189 # with other keys).
18190 # The terminal is capable of displaying "box draw" characters.
18191 # For each graphic character you must send 2 ESC's (\E\E) followed
18192 # by a control character as follows:
18193 # character meaning
18194 # ========= =======
18197 # ctrl-G bottom tee
18200 # ctrl-J top left corner
18201 # ctrl-K top right corner
18202 # ctrl-L bottom left corner
18203 # ctrl-M bottom right corner
18204 # ctrl-N horizontal line
18205 # ctrl-O vertical line
18206 # Unfortunately this cannot be fitted into the termcap/terminfo
18207 # description scheme.
18208 dp8242|datapoint 8242,
18211 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
18212 cr=^M, cub1=^H, cud1=^J,
18213 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
18214 home=^U, ht=^I, il1=\E^T, ind=^C,
18215 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18216 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
18217 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
18218 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
18219 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
18220 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
18221 smso=\E^E, smul=\E^F,
18222 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
18224 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
18226 # These entries are DEC's official terminfos for its older terminals.
18227 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
18228 # Engineering for more information. Updated terminfos and termcaps
18229 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
18235 bel=^G, cr=^M, cub1=^H, cud1=^J,
18239 bel=^G, cr=^M, cub1=^H, cud1=^J,
18243 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18244 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
18248 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18249 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18250 el=\EK, ht=^I, ind=^J, ri=\EI,
18251 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
18252 vt61|vt-61|vt61.5|dec vt61,
18254 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
18255 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
18256 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
18257 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18260 # The gigi does standout with red!
18261 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
18262 gigi|vk100|dec gigi graphics terminal,
18265 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
18266 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18267 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18268 el=\E[K, ht=^I, ind=^J,
18269 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
18270 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
18271 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
18272 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18273 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
18276 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
18277 # a PC differentiated from the IBM clones. It was a total, ludicrous,
18278 # grossly-overpriced failure (among other things, DEC's OS didn't include
18279 # a format program, so you had to buy pre-formatted floppies from DEC at
18280 # a hefty premium!).
18281 pro350|decpro|dec pro console,
18283 cols#80, it#8, lines#24,
18284 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18285 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
18286 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18287 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18288 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
18289 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
18290 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
18295 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
18296 dw2|decwriter|dw|decwriter II,
18299 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
18300 # \E(B Use U.S. character set (otherwise # => british pound !)
18301 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
18302 # \E[w 10 char/in pitch
18303 # \E[1;132 full width horizontal margins
18304 # \E[2g clear all tab stops
18306 # \E[66t 66 lines/page (for \f)
18307 # \E[1;66r full vertical page can be printed
18308 # \E[4g clear vertical tab stops
18309 # \E> disable alternate keypad mode (so it transmits numbers!)
18310 # \E[%i%p1%du set tab stop at column %d (origin == 1)
18311 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
18314 # The dw3 does standout with wide characters.
18316 dw3|la120|decwriter III,
18319 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
18320 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
18321 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
18322 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
18326 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
18327 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
18329 # These aren't official
18330 ln03|dec ln03 laser printer,
18333 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
18334 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
18336 ln03-w|dec ln03 laser printer 132 cols,
18338 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
18339 kcud1=^J, nel=^M^J, use=ln03,
18341 #### Delta Data (dd)
18344 # Untested. The cup sequence is hairy enough that it probably needs work.
18345 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
18346 # There are BSD-derived termcap entries floating around for this puppy
18347 # that are *certainly* wrong.
18348 delta|dd5000|delta data 5000,
18351 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
18352 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
18353 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
18355 #### Digital Data Research (ddr)
18358 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
18359 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
18361 cols#80, it#8, lines#24, vt#3,
18362 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
18363 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
18364 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
18365 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
18366 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
18367 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
18368 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
18369 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
18370 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
18371 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18372 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
18375 #### Evans & Sutherland
18378 # Jon Leech <leech@cs.unc.edu> tells us:
18379 # The ps300 was the Evans & Sutherland Picture System 300, a high
18380 # performance 3D vector graphics system with a bunch of specialized hardware.
18381 # Approximate date of release was 1982 (early 80s, anyway), and it had several
18382 # evolutions including (limited) color versions such as the PS330C. PS300s
18383 # were effectively obsolete by the late 80s, replaced by raster graphics
18384 # systems, although specialized applications like molecular modelling
18385 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
18386 # are out of production, though of course E&S is very much alive (in 1996).
18387 # (ps300: changed ":pt@:" to "it@" -- esr)
18389 ps300|Picture System 300,
18392 rmso@, rmul@, smso@, smul@, use=vt100,
18394 #### General Electric (ge)
18397 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
18400 bel=^G, cr=^M, cud1=^J, ind=^J,
18402 #### Heathkit/Zenith
18405 # Here is a description of the H19 DIP switches:
18408 # 0-3 = baud rate as follows:
18413 # 0 1 0 1 1200 baud
18414 # 1 0 0 0 2400 baud
18415 # 1 0 1 0 4800 baud
18416 # 1 1 0 0 9600 baud
18417 # 1 1 0 1 19.2K baud
18419 # 4 = parity (0 = no parity)
18420 # 5 = even parity (0 = odd parity)
18421 # 6 = stick parity (0 = normal parity)
18422 # 7 = full duplex (0 = half duplex)
18425 # 0 = block cursor (0 = underscore cursor)
18426 # 1 = no key click (0 = keyclick)
18427 # 2 = wrap at end of line (0 = no wrap)
18428 # 3 = auto LF on CR (0 = no LF on CR)
18429 # 4 = auto CR on LF (0 = no CR on LF)
18430 # 5 = ANSI mode (0 = VT52 mode)
18431 # 6 = keypad shifted (0 = keypad unshifted)
18432 # 7 = 50Hz refresh (1 = 60Hz refresh)
18434 # Factory Default settings are as follows:
18436 # S401 1 0 0 0 1 1 0 0
18437 # S402 0 0 0 0 0 0 0 0
18438 # (h19: I added <rmam>/<smam> based on the init string;
18439 # also added empty <acsc> to suppress a tic warning -- esr)
18440 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
18441 OTbs, am, mir, msgr,
18442 cols#80, it#8, lines#24,
18443 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
18444 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
18445 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
18446 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
18447 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
18448 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
18449 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
18450 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
18451 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
18452 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
18453 h19-bs|heathkit w/keypad shifted,
18454 rmkx=\Eu, smkx=\Et, use=h19-b,
18455 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
18456 rmkx=\Eu, smkx=\Et, use=h19-u,
18457 # (h19: merged in <ip> from BSDI hp19-e entry>;
18458 # also added empty <acsc> to suppress a tic warning --esr)
18459 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
18460 # Tim tells us that:
18461 # I have an old Zenith-19 terminal at home that still gets a lot of use.
18462 # This terminal suffers from the same famous insert-mode padding lossage
18463 # that has been acknowledged for the Z29 terminal. Emacs is nearly
18464 # unusable on this box, since even a half-scroll up or down the window
18465 # causes flaming terminal death.
18467 # On the Z19, the only way I have found around this problem is to remove
18468 # the :al: and :dl: entries entirely. No amount of extra padding will
18469 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
18470 # makes Emacs a little slower, but it remains in the land of the living.
18472 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
18473 OTbs, am, eslok, hs, mir, msgr,
18474 cols#80, it#8, lines#24,
18475 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
18476 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18477 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
18478 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
18479 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18480 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
18481 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
18482 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18483 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
18484 h19-u|heathkit with underscore cursor,
18485 cnorm@, cvvis@, use=h19-b,
18486 h19-g|h19g|heathkit w/block cursor,
18487 cnorm=\Ex4, cvvis@, use=h19-b,
18488 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
18490 dl1=\EM, il1=\EL, use=h19,
18492 # The major problem with the Z29 is that it requires more padding than the Z19.
18494 # The problem with declaring an H19 to be synonymous with a Z29 is that
18495 # it needs more padding. It especially loses if a program attempts
18496 # to put the Z29 into insert mode and insert text at 9600 baud. It
18497 # even loses worse if the program attempts to insert tabs at 9600
18498 # baud. Adding padding to text that is inserted loses because in
18499 # order to make the Z29 not die, one must add so much padding that
18500 # whenever the program tries to use insert mode, the effective
18501 # rate is about 110 baud.
18503 # What program would want to put the terminal into insert mode
18504 # and shove stuff at it at 9600 baud you ask?
18506 # Emacs. Emacs seems to want to do the mathematically optimal
18507 # thing in doing a redisplay rather than the practical thing.
18508 # When it is about to output a line on top of a line that is
18509 # already on the screen, instead of just killing to the end of
18510 # the line and outputting the new line, it compares the old line
18511 # and the new line and if there are any similarities, it
18512 # constructs the new line by deleting the text on the old line
18513 # on the terminal that is already there and then inserting new
18514 # text into the line to transform it into the new line that is
18515 # to be displayed. The Z29 does not react kindly to this.
18517 # But don't cry for too long.... There is a solution. You can make
18518 # a termcap entry for the Z29 that says the Z29 has no insert mode.
18519 # Then Emacs cannot use it. "Oh, no, but now inserting into a
18520 # line will be really slow", you say. Well there is a sort of a
18521 # solution to that too. There is an insert character option on
18522 # the Z29 that will insert one character. Unfortunately, it
18523 # involves putting the terminal into ansi mode, inserting the
18524 # character, and changing it back to H19 mode. All this takes 12
18525 # characters. Pretty expensive to insert one character, but it
18526 # works. Either Emacs doesn't try to use its inserting hack when
18527 # it's only given an insert character ability or the Z29 doesn't
18528 # require padding with this (the former is probably more likely,
18529 # but I haven't checked it out).
18530 # (z29: added empty <acsc> to suppress a tic warning, merged in
18531 # status line capabilities from BRL entry --esr)
18532 z29|zenith29|z29b|zenith z29b,
18533 OTbs, OTpt, am, eslok, hs, mir, msgr,
18534 OTkn#10, cols#80, lines#24,
18535 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
18536 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18537 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
18538 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
18539 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
18540 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
18541 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
18542 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
18543 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
18544 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
18545 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
18546 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18547 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
18548 # the world is stable. <rs1> causes the terminal to be reset to the state
18549 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
18550 # cursor, bc -> block cursor.
18551 # From: Mike Meyers
18552 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
18553 # looks vt100-compatible -- esr)
18554 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
18555 OTbs, OTpt, am, eslok, hs, mir, msgr,
18556 OTkn#10, cols#80, it#8, lines#24,
18557 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
18558 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18559 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18560 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18561 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18562 dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
18563 ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
18564 ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
18565 kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
18566 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18567 kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
18568 nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
18569 rmso=\E[m, rmul=\E[m,
18570 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
18571 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
18572 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
18573 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
18574 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
18576 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
18577 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
18579 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
18580 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
18582 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
18583 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
18584 am, eslok, hs, mc5i, mir, msgr, xon,
18586 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
18587 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
18588 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
18589 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18590 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18591 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18592 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
18593 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
18594 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
18595 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
18596 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
18597 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
18598 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
18599 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
18600 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
18601 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
18602 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
18603 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18604 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
18606 # From: Brad Brahms <Brahms@USC-ECLC>
18607 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
18608 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
18609 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
18610 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
18611 OTbs, OTpt, mir, msgr,
18612 OTkn#10, cols#80, it#8, lines#24,
18613 acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
18614 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
18615 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
18616 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
18617 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
18618 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
18619 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
18620 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
18621 smir=\E@, smso=\Ep,
18622 p19|h19-b with il1/dl1,
18623 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
18624 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
18625 # (ztx: removed duplicate :sr: -- esr)
18626 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
18627 OTbs, am, eslok, hs,
18628 cols#80, it#8, lines#24,
18629 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
18630 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18631 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
18632 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
18633 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
18634 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
18635 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
18636 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
18638 #### IMS International (ims)
18640 # There was a company called IMS International located in Carson City,
18641 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
18642 # bus/Z80 hardware and a line of terminals called Ultimas.
18645 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
18646 ims950-b|bare ims950 no init string,
18648 # (ims950: removed obsolete ":ko@:" -- esr)
18649 ims950|ims televideo 950 emulation,
18651 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18652 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
18653 # (ims950-rv: removed obsolete ":ko@:" -- esr)
18654 ims950-rv|ims tvi950 rev video,
18656 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
18657 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
18658 ims-ansi|ultima2|ultimaII|IMS Ultima II,
18660 cols#80, it#8, lines#24,
18661 clear=\E[H\E[2J, cub1=^H, cud1=\ED,
18662 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
18663 ht=^I, if=/usr/share/tabset/vt100,
18664 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
18665 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
18666 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
18669 #### Intertec Data Systems
18671 # I think this company is long dead as of 1995. They made an early CP/M
18672 # micro called the "Intertec Superbrain" that was moderately popular,
18673 # then sank out of sight.
18676 superbrain|intertec superbrain,
18679 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
18680 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
18681 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
18682 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
18683 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
18684 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
18685 # and the reverse is actually true. Try it. -- esr)
18686 intertube|intertec|Intertec InterTube,
18689 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
18690 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
18691 ind=^J, rmso=\E0@, smso=\E0P,
18692 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
18693 # are typing and a command comes in, the keystrokes you type get interspersed
18694 # with the command and it messes up
18695 intertube2|intertec data systems intertube 2,
18697 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
18698 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
18699 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
18701 #### Ithaca Intersystems
18703 # This company made S100-bus personal computers long ago in the pre-IBM-PC
18704 # past. They used to be reachable at:
18706 # Ithaca Intersystems
18707 # 1650 Hanshaw Road
18708 # Ithaca, New York 14850
18710 # However, the outfit went bankrupt years ago.
18713 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
18714 # These entries were written (originally in termcap syntax) by Brian Yandell
18715 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
18716 # University of Wisconsin.
18718 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
18719 # removed <if=/usr/share/tabset/init.graphos> and
18720 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
18721 graphos|graphos III,
18723 cols#80, it#8, lines#24,
18724 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
18725 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18726 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18727 cuu=\E[%p1%dA, cuu1=\E[A,
18728 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
18729 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
18730 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18731 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
18732 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
18733 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
18734 smir=\E[4h, smso=\E[7m,
18735 graphos-30|graphos III with 30 lines,
18737 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
18741 # These people used to be reachable at:
18744 # 1393 Main Street,
18745 # Waltham, MA 02154
18746 # Vox: (617)-890-5796.
18748 # However, if you call that number today you'll get an insurance company.
18749 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
18750 # 26 Feb 1997 that says:
18752 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
18753 # for ~7 years. Modgraph still in business. Products are rugged laptop and
18754 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
18755 # panel-mount etc). I can be emailed at sonfour@aol.com
18757 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
18758 # dated 1984. According to the manual, it featured Tek 4010/4014
18759 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
18762 modgraph|mod24|modgraph terminal emulating vt100,
18765 cvvis=\E\^9;0s\E\^7;1s,
18766 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
18767 rf@, ri=\EM\E[K$<5/>, use=vt100,
18768 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
18769 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
18771 cols#80, it#8, lines#24,
18772 clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
18773 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
18774 ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
18775 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
18778 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
18779 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
18780 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
18781 # mark and using delete-to-killbuffer work correctly. However, we would
18782 # like normal mode of operation to be using a Modgraph with 48 line setting.
18783 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
18784 # the setting mark and delete-to-killbuffer results in the deletion of only
18785 # the line the mark is set on.
18786 # We've discovered that the delete-to-killbuffer works correctly
18787 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
18788 # the first line disappears but a ctrl-l shows that it did work
18790 modgraph48|mod|Modgraph w/48 lines,
18791 OTbs, OTpt, am, xenl,
18792 cols#80, it#8, lines#48, vt#3,
18793 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
18794 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
18795 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
18796 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
18797 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
18798 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18799 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
18800 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18801 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
18802 smso=\E[7m, smul=\E[4m,
18804 #### Morrow Designs
18806 # This was George Morrow's company. They started in the late 1970s making
18807 # S100-bus machines. They used to be reachable at:
18810 # 600 McCormick St.
18811 # San Leandro, CA 94577
18813 # but they're long gone now (1995).
18816 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
18817 # Jeff's specimen was dated June 1984.
18818 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
18819 mt70|mt-70|Morrow MD-70; native Morrow mode,
18820 am, mir, msgr, xon,
18821 cols#80, it#8, lines#24,
18822 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
18823 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
18824 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
18825 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
18826 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
18827 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
18828 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
18829 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
18830 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
18831 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
18832 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18833 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
18834 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
18835 smul=\EG1, tbc=\E0, use=adm+sgr,
18840 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
18842 ex155|Motorola Exorterm 155,
18844 OTkn#5, OTug#1, cols#80, lines#24,
18845 cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
18846 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
18847 home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
18848 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
18849 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
18853 # This company is still around in 1995, manufacturing point-of-sale systems.
18855 omron|Omron 8025AG,
18858 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
18859 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
18860 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
18864 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
18865 # were competition for things like the Tektronics 4025.
18868 # Ramtek 6221 from BRL, probably by Doug Gwyn
18869 # The following SET-UP modes are assumed for normal operation:
18870 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
18871 # NEWLINE_OFF 80_COLUMNS
18872 # Other SET-UP modes may be set for operator convenience or communication
18873 # requirements; I recommend
18874 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
18875 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
18876 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
18877 # Note that the Control-E key is useless on this brain-damaged terminal. No
18878 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18879 rt6221|Ramtek 6221 80x24,
18880 OTbs, OTpt, msgr, xon,
18881 OTkn#4, cols#80, it#8, lines#24, vt#3,
18882 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
18883 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
18884 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18885 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
18886 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
18887 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
18888 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18889 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
18890 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
18891 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
18892 rmso=\E[m, rmul=\E[m,
18893 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
18894 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
18895 smul=\E[4m, tbc=\E[3g,
18896 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
18897 rt6221-w|Ramtek 6221 160x48,
18898 cols#160, lines#48,
18899 ll=\E[48;1H, use=rt6221,
18904 # RCA VP3301 or VP3501
18905 rca|rca vp3301/vp3501,
18908 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18909 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
18915 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
18916 # The following SET-UP modes are assumed for normal operation:
18917 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
18918 # ONLINE ANSI CURSOR_VISIBLE
18919 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
18920 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
18921 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
18922 # For use with graphics software, all graphics modes should be set to factory
18923 # default. Other SET-UP modes may be set for operator convenience or
18924 # communication requirements. No delays are specified; use "stty ixon -ixany"
18925 # to enable DC3/DC1 flow control!
18926 # I commented out the scrolling capabilities since they are too slow.
18927 hirez100|Selanar HiREZ-100,
18928 OTbs, OTpt, mir, msgr, xon,
18929 OTkn#4, cols#80, it#8, lines#48, vt#3,
18930 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
18931 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
18932 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18933 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
18934 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18935 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
18936 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
18937 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
18938 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
18939 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
18940 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18941 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
18942 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
18943 smul=\E[4m, tbc=\E[3g,
18944 hirez100-w|Selanar HiREZ-100 in 132-column mode,
18945 cols#132, use=hirez100,
18950 # From University of Wisconsin
18951 vsc|Signetics Vsc Video driver by RMC,
18953 cols#80, it#8, lines#26,
18954 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
18955 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18956 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
18957 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
18961 # Alan Frisbie <frisbie@flying-disk.com> writes:
18963 # As you may recall, the Soroc logo consisted of their name,
18964 # with the letter "S" superimposed over an odd design. This
18965 # consisted of a circle with a slightly smaller 15 degree (approx.)
18966 # wedge with rounded corners inside it. The color was sort of
18967 # a metallic gold/yellow.
18969 # If I had been more of a beer drinker it might have been obvious
18970 # to me, but it took a clue from their service department to make
18971 # me exclaim, "Of course!" The circular object was the top of
18972 # a beer can (the old removable pop-top style) and "Soroc" was an
18973 # anagram for "Coors".
18975 # I can just imagine the founders of the company sitting around
18976 # one evening, tossing back a few and trying to decide what to
18977 # call their new company and what to use for a logo.
18980 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
18981 soroc120|iq120|soroc|soroc iq120,
18982 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
18983 kcuf1=^L, kcuu1=^K, use=adm3a,
18984 soroc140|iq140|soroc iq140,
18987 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18988 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
18989 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
18990 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
18991 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18992 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
18993 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
18995 #### Southwest Technical Products
18997 # These guys made an early personal micro called the M6800.
18998 # The ct82 was probably its console terminal.
19001 # (swtp: removed obsolete ":bc=^D:" -- esr)
19002 swtp|ct82|southwest technical products ct82,
19005 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
19006 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
19007 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
19008 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
19009 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
19013 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
19015 # Synertek used to make ICs, various 6502-based single-board process
19016 # control and hobbyist computers, and assorted peripherals including a
19017 # series of small inexpensive terminals (I think they were one of the
19018 # first to have a "terminal-on-a-keyboard", where the terminal itself
19019 # was only slightly larger than the keyboard).
19021 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
19022 # was a 40x24 terminal that could connect to a standard TV through a
19023 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
19024 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
19025 # I have a KTM-2/80 still in working order. The KTM-2s had fully
19026 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
19027 # ROM and 2 ROMs as character generators. They were incredibly simple,
19028 # and I've never had any problems with mine (witness the fact that mine
19029 # was made in 1981 and is still working great... I've blown the video
19030 # output transistor a couple of times, but it's a 2N2222 :-)
19032 # The KTM-3 (which is what is listed in the terminfo file) was their
19033 # attempt at putting a KTM-2 in a box (and some models came with a
19034 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
19035 # control and escape sequences are very different. The KTM-3 was always
19036 # real broken, at least according to the folks I've talked to about it.
19038 # The padding in the entry is probably off--these terminals were very
19039 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
19040 # anyone with any sanity replaced the ROMs with something that provided
19041 # a reasonable subset of VT100 functionality, since the usual ROMs were
19042 # obviously very primitive... oh, you could get an upgraded ROM from
19043 # Synertek for some incredible amount of money, but what hacker with an
19044 # EPROM burner would do that? :)
19046 # Sorry I don't have any contact info; I believe they were located in
19047 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
19048 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
19049 # business these days.
19052 # Tested, seems to work fine with vi.
19053 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
19056 clear=^Z, cub1=^H, cuf1=^L,
19057 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19059 #### Tab Office Products
19061 # TAB Products Co. - Palo Alto, California
19062 # Electronic Office Products,
19063 # 1451 California Avenue 94304
19065 # I think they're out of business.
19068 # The tab 132 uses xon/xoff, so no padding needed.
19069 # <smkx>/<rmkx> have nothing to do with arrow keys.
19070 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
19071 # Seems to be no way to get rid of status line.
19072 # The manual for this puppy was dated June 1981. It claims to be VT52-
19073 # compatible but looks more vt100-like.
19074 tab132|tab|tab132-15|tab 132/15,
19076 OTdN@, cols#80, lines#24, lm#96,
19077 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
19078 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
19079 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
19080 tab132-w|tab132 in wide mode,
19082 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
19083 tab132-rv|tab132 in reverse-video mode,
19084 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
19085 tab132-w-rv|tab132 in reverse-video/wide mode,
19086 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
19091 # Research Incorporated
19092 # 6425 Flying Cloud Drive
19093 # Eden Prairie, MN 55344
19094 # Vox: (612)-941-3300
19096 # The Teleray terminals were all discontinued in 1992-93. RI still services
19097 # and repairs these beasts, but no longer manufactures them. The Teleray
19098 # people believe that all the types listed below are very rare now (1995).
19099 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
19100 # Model 100) that were ANSI-compatible.
19102 # Note two things called "teleray". Reorder should move the common one
19103 # to the front if you have either. A dumb teleray with the cursor stuck
19104 # on the bottom and no obvious model number is probably a 3700.
19107 t3700|dumb teleray 3700,
19110 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
19111 t3800|teleray 3800 series,
19113 cols#80, it#8, lines#24,
19114 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19115 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
19116 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
19117 t1061|teleray|teleray 1061,
19118 OTbs, am, km, xhp, xt,
19119 cols#80, it#8, lines#24, xmc#1,
19120 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19121 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19122 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
19123 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
19124 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
19125 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
19126 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
19128 t1061f|teleray 1061 with fast PROMs,
19129 dl1=\EM, il1=\EL, ip@, use=t1061,
19130 # "Teleray Arpa Special", officially designated as
19131 # "Teleray Arpa network model 10" with "Special feature 720".
19132 # This is the new (1981) fast microcode updating the older "arpa" proms
19133 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
19134 # converts the keypad to programmable function keys, and has other goodies.
19135 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
19136 # programs handle such lossage properly.
19137 # Note: this is NOT the old termcap's "t1061f with fast proms."
19138 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
19139 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
19140 t10|teleray 10 special,
19142 cols#80, it#8, lines#24, xmc#2,
19143 clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
19144 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19145 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19146 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
19148 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
19149 # back/forth words. Put the function keys (f1-f10) where they can be
19150 # found, and turn off the other magic keys along the top row, except
19151 # for line/local. Do the magic appropriate to make the page shifts work.
19152 # Also toggle ^S/^Q for those of us who use Emacs.
19154 am, da, db, mir, xhp, xt,
19156 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
19157 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
19158 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
19159 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
19160 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
19161 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
19162 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
19163 smso=\E[7m, smul=\E[4m,
19165 #### Texas Instruments (ti)
19168 # The Silent 700 was so called because it was built around a quiet thermal
19169 # printer. It was portable, equipped with an acoustic coupler, and pretty
19170 # neat for its day.
19171 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
19174 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
19177 # Texas Instruments 916 VDT 7 bit control mode
19179 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
19181 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
19182 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
19183 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19184 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
19185 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
19186 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
19187 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
19188 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
19189 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
19190 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
19191 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
19192 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
19193 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
19194 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
19197 # Texas Instruments 916 VDT 8 bit control mode
19199 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
19200 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
19201 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
19202 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
19203 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19204 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
19205 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
19207 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
19209 ti916-132|Texas Instruments 916 VDT vt220 132 column,
19210 cols#132, use=ti916,
19212 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
19214 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
19215 cols#132, use=ti916-8,
19216 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
19218 cols#80, it#8, lines#24,
19219 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19220 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19221 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19222 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19223 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19224 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19225 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
19226 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
19227 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
19228 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19229 smul=\E[4m, tbc=\E[3g,
19230 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
19232 cols#80, it#8, lines#24,
19233 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19234 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
19235 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
19236 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
19237 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
19238 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19239 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
19240 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
19241 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
19242 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
19243 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
19244 smul=\E[4m, tbc=\E[3g,
19245 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
19246 cols#132, use=ti924,
19247 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
19248 cols#132, use=ti924-8,
19249 ti931|Texas Instruments 931 VDT,
19252 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
19253 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19254 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
19255 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
19256 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19257 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
19258 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
19259 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
19260 sgr0=\E4@, smso=\E4A, smul=\E4D,
19261 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
19262 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
19263 # (ti926-8: I corrected this from the broken SCO entry -- esr)
19264 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
19265 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
19266 ti_ansi|basic entry for ti928,
19267 am, bce, eo, xenl, xon,
19268 colors#8, cols#80, it#8, lines#25, pairs#64,
19269 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
19270 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
19271 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
19272 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
19273 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19274 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
19275 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
19276 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
19277 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
19278 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
19279 smso=\E[7m, smul=\E[4m,
19281 # 928 VDT 7 bit control mode
19283 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
19284 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
19285 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
19286 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
19287 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
19288 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
19290 # 928 VDT 8 bit control mode
19292 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
19293 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
19294 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
19295 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
19296 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
19297 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
19298 kpp=\233T, kprt=\23335~, use=ti_ansi,
19303 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
19304 # had just <smso>=\EG6 which I think means standout was supposed to be
19305 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
19306 # <invis> might work-- esr)
19307 zen30|z30|zentec 30,
19310 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19311 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19312 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
19313 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
19314 smul@, use=adm+sgr,
19315 # (zen50: this had extension capabilities
19316 # :BS=^U:CL=^V:CR=^B:
19317 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
19318 # which were also in the original entry -- esr)
19319 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
19320 zen50|z50|zentec zephyr,
19322 cols#80, lines#24, xmc#1,
19323 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
19324 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
19325 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
19326 rmul@, smul@, use=adm+sgr,
19328 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
19329 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
19332 blink=\EM", clear=\EH\EJ, cnorm=\EP,
19333 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
19334 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
19335 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
19336 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
19337 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
19338 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
19339 smso=\EM$, smul=\EM0,
19341 ######## OBSOLETE UNIX CONSOLES
19344 #### Apollo consoles
19346 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
19347 # labeled HP700s now.
19350 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
19351 apollo|apollo console,
19354 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
19355 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
19356 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
19357 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
19358 smso=\ES, smul=\EU, vpa=\EO+\s,
19360 # We don't know whether or not the apollo guys replicated DEC's firmware bug
19361 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
19362 # both these capabilities.
19363 apollo_15P|apollo 15 inch display,
19364 rmir@, smir@, use=vt132,
19365 apollo_19L|apollo 19 inch display,
19366 rmir@, smir@, use=vt132,
19367 apollo_color|apollo color display,
19368 rmir@, smir@, use=vt132,
19370 #### Convergent Technology
19372 # Burroughs bought Convergent shortly before it merged with Univac.
19373 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
19374 # from 1991 or earlier).
19377 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
19378 # (aws: removed unknown :dn=^K: -- esr)
19379 aws|Convergent Technologies AWS workstation under UTX and Xenix,
19381 OTug#0, cols#80, lines#28, xmc#0,
19382 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
19383 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
19384 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
19385 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
19386 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
19387 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
19389 awsc|Convergent Technologies AWS workstation under CTOS,
19391 OTug#0, cols#80, lines#24, xmc#0,
19392 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
19393 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
19394 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
19395 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
19401 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
19402 # The digital uVax II's had a graphic display called a qdss. It was
19403 # supposed to be a high performance graphic accelerator, but it was
19404 # late to market and barely appeared before faster dumb frame buffers
19405 # appeared. I have only used this display while running X11. However,
19406 # during bootup, it was in text mode, and probably had a terminal emulator
19407 # within it. And that is what your termcap entry is for. In graphics
19408 # mode the screen size is 1024x864 pixels.
19409 qdss|qdcons|qdss glass tty,
19411 cols#128, lines#57,
19412 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
19413 cup=\E=%p1%c%p2%c, cuu1=^K,
19415 #### Fortune Systems consoles
19417 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
19418 # in their day; I (esr) used one myself for a year or so around 1984.
19419 # They had no graphics, though, and couldn't compete against Suns and
19423 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
19424 # (This had extension capabilities
19425 # :rv=\EH:re=\EI:rg=0:GG=0:\
19426 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
19427 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
19428 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
19429 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
19430 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
19431 # to force both magic cookie glitches off. Once upon a time, I
19432 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
19433 # function keys; thus the "Al" value for HM was certainly an error. I renamed
19434 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
19435 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
19436 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
19437 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
19438 fos|fortune|Fortune system,
19441 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
19442 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
19443 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
19444 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
19445 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
19446 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
19447 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
19448 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
19449 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
19450 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
19451 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
19452 smso=^\H`, smul=^\HP,
19454 #### Masscomp consoles
19456 # Masscomp has gone out of business. Their product line was purchased by
19457 # comany in Georgia (US) called "XS International", parts and service may
19458 # still be available through them.
19461 # (masscomp: ":MT:" changed to ":km:"; -- esr)
19462 masscomp|masscomp workstation console,
19464 cols#80, it#8, lines#24,
19465 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
19466 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19467 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
19468 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
19469 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
19470 masscomp1|masscomp large screen version 1,
19471 cols#104, lines#36, use=masscomp,
19472 masscomp2|masscomp large screen version 2,
19473 cols#64, lines#21, use=masscomp,
19475 ######## OTHER OBSOLETE TYPES
19477 # These terminals are *long* dead -- these entries are retained for
19478 # historical interest only.
19481 #### Obsolete non-ANSI software emulations
19484 # CTRM terminal emulator
19485 # 1. underlining is not allowed with colors: first, is is simulated by
19486 # black on white, second, it disables background color manipulations.
19487 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
19488 # so we have to save their status in the static registers A, B and H
19489 # respectively, to be able to restore them when color changes
19490 # (because any color change turns off ALL attributes)
19491 # 3. <bold> and <rev> sequences alternate modes,
19492 # rather than simply entering them. Thus we have to check the
19493 # static register B and H to determine the status, before sending the
19495 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
19496 # and then reset colors
19497 # 5. implementation of the protect mode would badly penalize the performance.
19498 # we would have to use \E&bn sequence to turn off colors (as well as all
19499 # other attributes), and keep the status of protect mode in yet another
19500 # static variable. If someone really needs this mode, they would have to
19501 # create another terminfo entry.
19502 # 6. original color-pair is white on black.
19503 # store the information about colors into static registers
19504 # 7. set foreground color. it performs the following steps.
19505 # 1) turn off all attributes
19506 # 2) turn on the background and video attributes that have been turned
19507 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
19508 # 3) turn on foreground attributes
19509 # 4) store information about foreground into U,V,W static registers
19510 # 8. turn on background: similar to turn on foreground above
19511 ctrm|C terminal emulator,
19513 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
19514 pairs#63, pb#19200, vt#6,
19515 bel=^G, blink=\E&dA%{1}%PA,
19516 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
19517 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19518 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
19519 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
19520 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
19521 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
19522 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
19523 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
19524 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
19525 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
19526 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
19527 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
19528 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
19529 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
19530 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
19532 # gs6300 - can't use blue foreground, it clashes with underline;
19533 # it's simulated with cyan
19534 # Bug: The <op> capability probably resets attributes.
19535 # (gs6300: commented out <rmln> (no <smln>) --esr)
19536 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
19537 am, bce, msgr, xon,
19538 colors#8, cols#80, it#8, lines#24, pairs#63,
19539 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19540 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
19541 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
19542 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19543 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19544 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
19545 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
19546 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
19547 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
19548 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
19549 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
19550 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
19551 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
19552 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
19554 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
19555 # MS-Kermit with Heath-19 emulation mode enabled
19556 # (h19k: changed ":pt@:" to ":it@"
19557 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
19562 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
19563 # Software (formerly Peripherals Computers & Supplies, Inc) of
19564 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
19565 # also be reached at support@synergy.com.
19566 versaterm|versaterm vt100 emulator for the macintosh,
19568 cols#80, it#8, lines#24,
19569 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19570 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
19571 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
19572 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
19573 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
19574 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
19575 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
19576 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
19577 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
19578 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
19579 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
19580 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
19583 # From: Rick Thomas <ihnp4!btlunix!rbt>
19584 # (xtalk: I added <rmam>/<smam> based on the init string.
19585 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
19586 am, mir, msgr, xon,
19587 cols#80, it#8, lines#24, vt#3, xmc#1,
19588 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19589 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
19590 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
19591 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
19592 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
19593 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
19594 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
19595 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
19596 rmkx=\E[?1l\E>, rmso=\E[m\s,
19597 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
19598 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
19599 tbc=\E[3g, use=vt100+fnkeys,
19601 # The official PC terminal emulator program of the AT&T Product Centers.
19602 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
19603 simterm|attpc running simterm,
19606 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19607 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
19608 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
19609 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
19611 #### Daisy wheel printers
19613 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
19614 # wheel terminals. These are now largely obsolete.
19617 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
19618 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
19621 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
19622 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
19623 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
19625 is2=\r \E9, use=diablo1620,
19626 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
19627 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
19628 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
19630 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
19632 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
19634 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
19635 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
19637 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
19638 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
19639 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
19640 # If no tab is set or the terminal's in a bad mood, it glitches the screen
19641 # around all of memory. Note that return puts a blank ("a return character")
19642 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
19643 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
19644 # curses won't work (some old BSD versions) because it doesn't clear this bit,
19645 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
19646 # I have been unable to get tabs set in all 96 lines - it always leaves at
19647 # least one line with no tabs in it, and once you tab through that line,
19648 # it completely weirds out.
19649 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
19652 cols#80, lines#24, lm#96,
19653 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
19654 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
19655 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
19656 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
19657 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
19661 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19662 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19663 gsi|mystery gsi terminal,
19666 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
19668 aj830|aj832|aj|anderson jacobson,
19670 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
19672 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
19673 aj510|Anderson-Jacobson model 510,
19676 clear=^L, cub1=^H, cuf1=\EX,
19677 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
19678 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
19679 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
19680 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
19681 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
19683 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
19684 # This is incomplete, but it's a start.
19685 nec5520|nec|spinwriter|nec 5520,
19688 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
19689 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
19691 qume5|qume|Qume Sprint 5,
19694 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
19695 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
19696 # I suspect the xerox 1720 is the same as the diablo 1620.
19697 xerox1720|x1720|x1750|xerox 1720,
19700 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
19703 #### Miscellaneous obsolete terminals, manufacturers unknown
19705 # If you have any information about these (like, a manufacturer's name,
19706 # and a date on the serial-number plate) please send it!
19708 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
19711 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
19712 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
19715 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
19716 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
19717 kf4=\E8, rmso=\Em^C, smso=\Em^L,
19718 cops10|cops|cops-10|cops 10,
19721 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
19722 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
19723 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
19725 # (d132: removed duplicate :ic=\E5:,
19726 # merged in capabilities from a BRL entry -- esr)
19727 d132|datagraphix|datagraphix 132a,
19730 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
19731 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
19732 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
19733 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
19734 # The d800 was an early portable terminal from c.1984-85 that looked a lot
19735 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
19736 # mode (which is what this entry looks like) and several other lesser-known
19739 OTbs, am, da, db, msgr, xhp,
19740 cols#80, it#8, lines#24,
19741 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
19742 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
19743 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
19744 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
19745 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
19746 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
19747 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19748 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
19749 digilog|digilog 333,
19752 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
19754 # The DWK was a terminal manufactured in the Soviet Union c.1986
19755 dwk|dwk-vt|dwk terminal,
19757 cols#80, it#8, lines#24,
19758 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
19759 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19760 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
19761 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
19762 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
19763 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
19764 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
19765 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
19766 sgr0=\EX, smacs=\EF, smso=\ET,
19767 env230|envision230|envision 230 graphics terminal,
19769 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
19770 sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
19772 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
19773 # coupler attached, the whole rig fitting in a suitcase and more or less
19774 # portable. Hot stuff for c.1977 :-) -- esr
19775 ep48|ep4080|execuport 4080,
19778 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
19779 ep40|ep4000|execuport 4000,
19780 cols#136, use=ep4080,
19781 # Adam Thompson <athompso@pangea.ca> tells us:
19782 # Informer series - these are all portable units, resembling older
19783 # automatic bread-baking machines. The terminal looks like a `clamshell'
19784 # design, but isn't. The structure is similar to the Direct terminals,
19785 # but only half the width. The entire unit is only about 10" wide.
19786 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
19787 # keyboard. All the keys are crammed together, much like some laptop
19788 # PCs today, but perhaps less well organized...all these units have a
19789 # bewildering array of plugs on the back, including a built-in modem.
19790 # The 305 was a color version of the 304; the 306 and 307 were mono and
19791 # color terminals built for IBM bisync protocols.
19792 # From: Paul Leondis <unllab@amber.berkeley.edu>
19793 ifmr|Informer D304,
19796 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
19797 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
19798 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
19800 # Entry largely based on wy60 and has the features of wy60ak.
19801 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
19802 am, bw, hs, km, mir, msgr, ul, xon,
19803 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
19804 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
19805 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
19806 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
19807 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
19808 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
19809 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
19811 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
19812 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
19813 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
19814 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
19815 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
19816 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
19817 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
19818 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
19819 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
19820 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
19821 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
19822 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
19823 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
19824 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
19825 rs3=\EwG\Ee($<150>,
19826 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
19827 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
19828 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
19829 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
19830 uc=\EG8\EG0, use=adm+sgr,
19831 teletec|Teletec Datascreen,
19834 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
19836 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
19837 # This description is for the LANPAR Technologies VISION 3220
19838 # terminal from 1984/85. The function key definitions k0-k5 represent the
19839 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
19840 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
19842 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
19843 # I had a couple of scopes (3221) like this once where I used to work, around
19844 # the 1987 time frame if memory serves me correctly. These scopes were made
19845 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
19846 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
19847 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
19848 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
19849 # (3221) cost about $1500 each, and one was always broken -- had to be sent
19850 # back to the shop for repairs.
19851 # The only real advantage these scopes had over the VT-240's were:
19852 # 1) They were faster in the Regis display, or at least the ones I did
19853 # 2) They had a handy debugging feature where you could split-screen the
19854 # scope, the graphics would appear on the top, and the REGIS commands would
19855 # appear on the bottom. I don't remember the VT-240s being able to do that.
19856 # I would swear that LANPAR Technologies was in MA someplace, but since I
19857 # don't work at the same place anymore, and those terminals and manuals were
19858 # long since junked, I cannot be any more sure than that.
19860 # (v3220: removed obsolete ":kn#10:",
19861 # I added <rmam>/<smam> based on the init string -- esr)
19862 v3220|LANPAR Vision II model 3220/3221/3222,
19863 OTbs, am, mir, xenl,
19864 cols#80, it#8, lines#24,
19865 clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
19866 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19867 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
19868 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
19869 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
19870 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
19871 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
19872 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
19873 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
19874 ######## ICH/ICH1 VERSUS RMIR/SMIR
19876 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
19877 # are present; the symptom is doubled characters in an update using insert.
19878 # These applications are technically correct; in both 4.3BSD termcap and
19879 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
19880 # unless the terminal needs both. To my knowledge, no terminal still in this
19881 # file requires both other than the very obsolete dm2500.
19883 # For ncurses-based applications this is not a problem, as ncurses uses
19884 # one or the other as appropriate but never mixes the two. Therefore we
19885 # have not corrected entries like `linux' and `xterm' that specify both.
19886 # If you see doubled characters from these, use the linux-nic and xterm-nic
19887 # entries that suppress ich/ich1. And upgrade to ncurses!
19890 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
19892 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
19893 # ECMA-48 standards are said to be almost identical, but are not the same
19894 # as X3.64 (though for practical purposes they are close supersets of it).
19896 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
19897 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
19898 # Coded Character Sets"), include your snail-mail address, and you should
19899 # receive the document in due course. Don't expect an email acknowledgement.
19901 # Related standards include "X3.4-1977: American National Standard Code for
19902 # Information Interchange" (the ASCII standard) and "X3.41.1974:
19903 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
19904 # American National Standard for Information Interchange." I believe (but
19905 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
19909 #### VT100/ANSI/ECMA-48
19911 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
19912 # and ECMA-48 Control Functions for Coded Character Sets.
19914 # Much of the content of this comment is adapted from a table prepared by
19915 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
19916 # discussion of some terminfo-related issues, and updates to capture ECMA-48
19917 # have been added. Control functions described in ECMA-48 only are tagged
19918 # with * after their names.
19920 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
19921 # sequences. In the main table, \E stands for an escape (\033) character,
19922 # SPC for space. Pn stands for a single numeric parameter to be inserted
19923 # in decimal ASCII. Ps stands for a list of such parameters separated by
19924 # semicolons. Parameter meanings for most parametrized sequences are
19925 # decribed in the notes.
19927 # Sequence Sequence Parameter or
19928 # Mnemonic Name Sequence Value Mode terminfo
19929 # -----------------------------------------------------------------------------
19930 # APC Applicatn Program Command \E _ - Delim -
19931 # BEL Bell * ^G - - bel
19932 # BPH Break Permitted Here * \E B - * -
19933 # BS Backpace * ^H - EF -
19934 # CAN Cancel * ^X - - - (A)
19935 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
19936 # CCH Cancel Previous Character \E T - - -
19937 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
19938 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
19939 # CMD Coding Method Delimiter * \E
19940 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
19941 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
19942 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
19943 # CSI Control Sequence Intro \E [ - Intro -
19944 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
19945 # CUB Cursor Backward \E [ Pn D 1 eF cub
19946 # CUD Cursor Down \E [ Pn B 1 eF cud
19947 # CUF Cursor Forward \E [ Pn C 1 eF cuf
19948 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
19949 # CUU Cursor Up \E [ Pn A 1 eF cuu
19950 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
19951 # DA Device Attributes \E [ Pn c 0 - -
19952 # DAQ Define Area Qualification \E [ Ps o 0 - -
19953 # DCH Delete Character \E [ Pn P 1 eF dch
19954 # DCS Device Control String \E P - Delim -
19955 # DL Delete Line \E [ Pn M 1 eF dl
19956 # DLE Data Link Escape * ^P - - -
19957 # DMI Disable Manual Input \E \ - Fs -
19958 # DSR Device Status Report \E [ Ps n 0 - - (I)
19959 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
19960 # EA Erase in Area \E [ Ps O 0 eF - (J)
19961 # ECH Erase Character \E [ Pn X 1 eF ech
19962 # ED Erase in Display \E [ Ps J 0 eF ed (J)
19963 # EF Erase in Field \E [ Ps N 0 eF -
19964 # EL Erase in Line \E [ Ps K 0 eF el (J)
19965 # EM End of Medium * ^Y - - -
19966 # EMI Enable Manual Input \E b Fs -
19967 # ENQ Enquire ^E - - -
19968 # EOT End Of Transmission ^D - * -
19969 # EPA End of Protected Area \E W - - - (K)
19970 # ESA End of Selected Area \E G - - -
19971 # ESC Escape ^[ - - -
19972 # ETB End Transmission Block ^W - - -
19973 # ETX End of Text ^C - - -
19974 # FF Form Feed ^L - - -
19975 # FNK Function Key * \E [ Pn SPC W - - -
19976 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
19977 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
19978 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
19979 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
19980 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
19981 # HPB Char Position Backward \E [ j 1 FE -
19982 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
19983 # HT Horizontal Tab * ^I - FE - (N)
19984 # HTJ Horz Tab w/Justification \E I - FE -
19985 # HTS Horizontal Tab Set \E H - FE hts
19986 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
19987 # ICH Insert Character \E [ Pn @ 1 eF ich
19988 # IDCS ID Device Control String \E [ SPC O - * -
19989 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
19990 # IL Insert Line \E [ Pn L 1 eF il
19991 # IND Index \E D - FE -
19992 # INT Interrupt \E a - Fs -
19993 # JFY Justify \E [ Ps SPC F 0 FE -
19994 # IS1 Info Separator #1 * ^_ - * -
19995 # IS2 Info Separator #1 * ^^ - * -
19996 # IS3 Info Separator #1 * ^] - * -
19997 # IS4 Info Separator #1 * ^\ - * -
19998 # LF Line Feed ^J - - -
19999 # LS1R Locking Shift Right 1 * \E ~ - - -
20000 # LS2 Locking Shift 2 * \E n - - -
20001 # LS2R Locking Shift Right 2 * \E } - - -
20002 # LS3 Locking Shift 3 * \E o - - -
20003 # LS3R Locking Shift Right 3 * \E | - - -
20004 # MC Media Copy \E [ Ps i 0 - - (S)
20005 # MW Message Waiting \E U - - -
20006 # NAK Negative Acknowledge * ^U - * -
20007 # NBH No Break Here * \E C - - -
20008 # NEL Next Line \E E - FE nel (D)
20009 # NP Next Page \E [ Pn U 1 eF -
20010 # NUL Null * ^@ - - -
20011 # OSC Operating System Command \E ] - Delim -
20012 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
20013 # PFS Page Format Selection * \E Pn SPC J 0 - -
20014 # PLD Partial Line Down \E K - FE - (T)
20015 # PLU Partial Line Up \E L - FE - (U)
20016 # PM Privacy Message \E ^ - Delim -
20017 # PP Preceding Page \E [ Pn V 1 eF -
20018 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
20019 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
20020 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
20021 # PTX Parallel Texts * \E [ \ - - -
20022 # PU1 Private Use 1 \E Q - - -
20023 # PU2 Private Use 2 \E R - - -
20024 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
20025 # REP Repeat Char or Control \E [ Pn b 1 - rep
20026 # RI Reverse Index \E M - FE - (V)
20027 # RIS Reset to Initial State \E c - Fs -
20028 # RM Reset Mode * \E [ Ps l - - - (W)
20029 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
20030 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
20031 # SCI Single-Char Introducer \E Z - - -
20032 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
20033 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
20034 # SD Scroll Down \E [ Pn T 1 eF rin
20035 # SDS Start Directed String * \E [ Pn ] 1 - -
20036 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
20037 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
20038 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
20039 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
20040 # SI Shift In ^O - - - (P)
20041 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
20042 # SL Scroll Left \E [ Pn SPC @ 1 eF -
20043 # SLH Set Line Home * \E [ Pn SPC U - - -
20044 # SLL Set Line Limit * \E [ Pn SPC V - - -
20045 # SLS Set Line Spacing * \E [ Pn SPC h - - -
20046 # SM Select Mode \E [ Ps h none - - (W)
20047 # SO Shift Out ^N - - - (Q)
20048 # SOH Start Of Heading * ^A - - -
20049 # SOS Start of String * \E X - - -
20050 # SPA Start of Protected Area \E V - - - (Z)
20051 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
20052 # SPH Set Page Home * \E [ Ps SPC G - - -
20053 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
20054 # SPL Set Page Limit * \E [ Ps SPC j - - -
20055 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
20056 # SR Scroll Right \E [ Pn SPC A 1 eF -
20057 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
20058 # SRS Start Reversed String * \E [ Ps [ 0 - -
20059 # SSA Start of Selected Area \E F - - -
20060 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
20061 # SSW Set Space Width * \E [ Pn SPC [ none - -
20062 # SS2 Single Shift 2 (G2 set) \E N - Intro -
20063 # SS3 Single Shift 3 (G3 set) \E O - Intro -
20064 # ST String Terminator \E \ - Delim -
20065 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
20066 # STS Set Transmit State \E S - - -
20067 # STX Start pf Text * ^B - - -
20068 # SU Scroll Up \E [ Pn S 1 eF indn
20069 # SUB Substitute * ^Z - - -
20070 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
20071 # SYN Synchronous Idle * ^F - - -
20072 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
20073 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
20074 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
20075 # TBC Tab Clear \E [ Ps g 0 FE tbc
20076 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
20077 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
20078 # TSS Thin Space Specification \E [ Pn SC E none FE -
20079 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
20080 # VPB Line Position Backward * \E [ Pn k 1 FE -
20081 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
20082 # VT Vertical Tabulation * ^K - FE -
20083 # VTS Vertical Tabulation Set \E J - FE -
20085 # ---------------------------------------------------------------------------
20089 # Some control characters are listed in the ECMA-48 standard without
20090 # being assigned functions relevant to terminal control there (they
20091 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
20092 # here anyway for completeness.
20094 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
20096 # (B) There seems to be some confusion abroad between CHA and HPA. Most
20097 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
20098 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
20099 # preserved the CHA abbreviation.
20101 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
20102 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
20103 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
20104 # CHT abbreviation.
20106 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
20108 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
20111 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
20112 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
20113 # 5 = clear all char tabs, 6 = clear all line tabs.
20115 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
20116 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
20117 # Position Absolute" but retains the HVP abbreviation.
20119 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
20122 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
20123 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
20124 # DSR, 6 = request CPR response.
20126 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
20127 # 1 = clear from beginning, 2 = clear.
20129 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
20131 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
20133 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
20134 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
20135 # Position Relative" but retains the HPR abbreviation.
20137 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
20140 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
20141 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
20142 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
20143 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
20144 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
20145 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
20146 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
20147 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
20148 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
20149 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
20150 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
20151 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
20152 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
20153 # 61-65 = variable highlights for ideograms.
20155 # (P) SI is also called LSO, Locking Shift Zero.
20157 # (Q) SI is also called LS1, Locking Shift One.
20159 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
20160 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
20161 # Absolute' but retains the VPA abbreviation.
20163 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
20164 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
20165 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
20166 # start relay to primary aux device, 6 = stop relay to secondary aux device,
20167 # 7 = start relay to secondary aux device.
20169 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
20172 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
20175 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
20177 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
20178 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
20179 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
20180 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
20181 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
20182 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
20183 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
20184 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
20185 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
20186 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
20187 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
20188 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
20189 # from ECMA-48's 5th edition but are listed here for reference.
20191 # (X) Select Alternate Presentation Variants is used only for non-Latin
20194 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
20196 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
20199 # ---------------------------------------------------------------------------
20203 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
20204 # X3.64 Control Sequence Introducer is the two characters "Escape ["
20206 # Delim a Delimiter
20208 # x/y identifies a character by position in the ASCII table (column/row)
20210 # eF editor function (see explanation)
20212 # FE format effector (see explanation)
20214 # F is a Final character in
20215 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
20216 # a control sequence (F from 4/0 to 7/14)
20218 # Gs is a graphic character appearing in strings (Gs ranges from
20219 # 2/0 to 7/14) in the ASCII table
20221 # Ce is a control represented as a single bit combination in the C1 set
20222 # of controls in an 8-bit character set
20224 # C0 the familiar set of 7-bit ASCII control characters
20226 # C1 roughly, the set of control chars available only in 8-bit systems.
20227 # This is too complicated to explain fully here, so read Jim Fleming's
20228 # article in the February 1983 BYTE, especially pages 214 through 224.
20230 # Fe is a Final character of a 2-character Escape sequence that has an
20231 # equivalent representation in an 8-bit environment as a Ce-type
20232 # (Fe ranges from 4/0 to 5/15)
20234 # Fs is a Final character of a 2-character Escape sequence that is
20235 # standardized internationally with identical representation in 7-bit
20236 # and 8-bit environments and is independent of the currently
20237 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
20239 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
20242 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
20245 # Pn is a numeric parameter in a control sequence, a string of zero or
20246 # more characters ranging from 3/0 to 3/9 in the ASCII table
20248 # Ps is a variable number of selective parameters in a control sequence
20249 # with each selective parameter separated from the other by the code
20250 # 3/11 (which usually represents a semicolon); Ps ranges from
20251 # 3/0 to 3/9 and includes 3/11
20253 # * Not relevant to terminal control, listed for completeness only.
20255 # Format Effectors versus Editor Functions
20257 # A format effector specifies how following output is to be displayed.
20258 # An editor function allows you to modify the display. Informally
20259 # format effectors may be destructive; format effectors should not be.
20261 # For instance, a format effector that moves the "active position" (the
20262 # cursor or equivalent) one space to the left would be useful when you want to
20263 # create an overstrike, a compound character made of two standard characters
20264 # overlaid. Control-H, the Backspace character, is actually supposed to be a
20265 # format effector, so you can do this. But many systems use it in a
20266 # nonstandard fashion, as an editor function, deleting the character to the
20267 # left of the cursor and moving the cursor left. When Control-H is assumed to
20268 # be an editor function, you cannot predict whether its use will create an
20269 # overstrike unless you also know whether the output device is in an "insert
20270 # mode" or an "overwrite mode". When Control-H is used as a format effector,
20271 # its effect can always be predicted. The familiar characters carriage
20272 # return, linefeed, formfeed, etc., are defined as format effectors.
20274 # NOTES ON THE DEC VT100 IMPLEMENTATION
20276 # Control sequences implemented in the VT100 are as follows:
20278 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
20279 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
20281 # plus several private DEC commands.
20283 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
20285 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
20286 # Erase from beginning of line to cursor Esc [ 1 K
20287 # Erase line containing cursor Esc [ 2 K
20288 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
20289 # Erase from beginning of screen to cursor Esc [ 1 J
20290 # Erase entire screen Esc [ 2 J
20292 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
20293 # Esc [ 2 J, but this is wrong; the default is 0.
20295 # The VT100 responds to receiving the DA (Device Attributes) control
20297 # Esc [ c (or Esc [ 0 c)
20299 # by transmitting the sequence
20303 # where Ps is a character that describes installed options.
20305 # The VT100's cursor location can be read with the DSR (Device Status
20310 # The VT100 reports by transmitting the CPR sequence
20314 # where Pl is the line number and Pc is the column number (in decimal).
20316 # The specification for the DEC VT100 is document EK-VT100-UG-003.
20320 # Here is a description of the color and attribute controls supported in the
20321 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
20322 # terminal emulators for Intel boxes obey these. They are a proper subset
20323 # of the ECMA-48 escapes.
20325 # 0 all attributes off
20326 # 1 foreground bright
20328 # 5 blink on/background bright (not reliable with brown)
20330 # 8 set blank (non-display)
20331 # 10 set primary font
20332 # 11 set first alternate font (on PCs, display ROM characters 1-31)
20333 # 12 set second alternate font (on PCs, display IBM high-half chars)
20335 # Color attribute sets
20336 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
20337 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
20338 # Bright black becomes gray. Bright brown becomes yellow,
20339 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
20341 # * If the 5 attribute is on and you set a background color (40-47) it is
20342 # supposed to enable bright background.
20344 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
20345 # when you try to set a "bright brown" (yellow) background with attribute
20346 # 5 (you get a blinking yellow foreground instead). A few displays
20347 # (including the System V console) support an attribute 6 that undoes this
20348 # braindamage (this is required by iBCS2).
20350 # * Some older versions of ANSI.SYS have a bug that causes thems to require
20351 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
20354 #### Intel Binary Compatibility Standard
20356 # For comparison, here are the capabilities implied by the Intel Binary
20357 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
20358 # These recommendations are optional. IBCS2 allows the leading escape to
20359 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
20360 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
20361 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
20362 # terminfo entry are followed with the corresponding capability in parens:
20364 # CSI <n>k disable (n=0) or enable (n=1) keyclick
20365 # CSI 2h lock keyboard
20366 # CSI 2i send screen as input
20367 # CSI 2l unlock keyboard
20368 # CSI 6m enable background color intensity
20369 # CSI <0-2>c reserved
20370 # CSI <0-59>m select graphic rendition
20371 # CSI <n>;<m>H (cup) cursor to line n and column m
20372 # CSI <n>;<m>f cursor to line n and column m
20373 # CSI <n>@ (ich) insert characters
20374 # CSI <n>A (cuu) cursor up n lines
20375 # CSI <n>B (cud) cursor down n lines
20376 # CSI <n>C (cuu) cursor right n characters
20377 # CSI <n>D (cud) cursor left n characters
20378 # CSI <n>E cursor down n lines and in first column
20379 # CSI <n>F cursor up n lines and in first column
20380 # CSI <n>G (hpa) position cursor at column n-1
20381 # CSI <n>J (ed) erase in display
20382 # CSI <n>K (el) erase in line
20383 # CSI <n>L (il) insert line(s)
20384 # CSI <n>P (dch) delete characters
20385 # CSI <n>S (indn) scroll up n lines
20386 # CSI <n>T (rin) scroll down n lines
20387 # CSI <n>X (ech) erase characters
20388 # CSI <n>Z (cbt) back up n tab stops
20389 # CSI <n>` cursor to column n on line
20390 # CSI <n>a (cuu) cursor right n characters
20391 # CSI <n>d (vpa) cursor to line n
20392 # CSI <n>e cursor down n lines and in first column
20393 # CSI <n>g (cbt) clear all tabs
20394 # CSI <n>z make virtual terminal n active
20395 # CSI ?7h (smam) turn automargin on
20396 # CSI ?7l (rmam) turn automargin off
20397 # CSI s save cursor position
20398 # CSI u restore cursor position to saved value
20399 # CSI =<c>A set overscan color
20400 # CSI =<c>F set normal foreground color
20401 # CSI =<c>G set normal background color
20402 # CSI =<c>H set reverse foreground color
20403 # CSI =<c>I set reverse foreground color
20404 # CSI =<c>J set graphic foreground color
20405 # CSI =<c>K set graphic foreground color
20406 # CSI =<n>g (dispc) display n from alternate graphics character set
20407 # CSI =<p>;<d>B set bell parameters
20408 # CSI =<s>;<e>C set cursor parameters
20409 # CSI =<x>D enable/disable intensity of background color
20410 # CSI =<x>E set/clear blink vs. bold background
20411 # CSI 7 (sc) (sc) save cursor position
20412 # CSI 8 (rc) (rc) restore cursor position to saved value
20413 # CSI H (hts) (hts) set tab stop
20414 # CSI Q<n><string> define function key string
20415 # (string must begin and end with delimiter char)
20416 # CSI c (clear) clear screen
20418 # The lack of any specification for attributes in SGR (among other things)
20419 # makes this a wretchedly weak standard. The table above is literally
20420 # everything iBSC2 has to say about terminal escape sequences; there is
20421 # no further discussion of their meaning or how to set the parameters
20422 # in these sequences at all.
20425 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
20427 # The historical termcap file entries were written primarily in 4.4BSD termcap.
20428 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
20429 # with the extension names chosen for compatibility with the termcap names
20430 # assigned in System V terminfo. There are some variant extension sets out
20431 # there. We try to describe them here.
20433 # XENIX extensions:
20435 # The XENIX extensions include a set of function-key capabilities as follows:
20437 # code XENIX variable name terminfo name name clashes?
20438 # ---- ------------------- ------------- -----------------------
20440 # CR key_char_right
20441 # CW key_change_window create_window
20443 # HM key_home khome
20445 # LD key_delete_line kdl1
20446 # LF key_linefeed label_off
20447 # NU key_next_unlocked_cell
20448 # PD key_page_down knp
20450 # PN start_print mc5
20452 # PS stop_print mc4
20453 # PU key_page_up kpp pulse
20454 # RC key_recalc remove_clock
20455 # RF key_toggle_ref req_for_input
20456 # RT key_return kent
20457 # UP key_up_arrow kcuu1 parm_up_cursor
20459 # WR key_word_right
20461 # The XENIX extensions also include the following character-set and highlight
20464 # XENIX terminfo function
20465 # ----- -------- ------------------------------
20466 # GS smacs start alternate character set
20467 # GE rmacs end alternate character set
20468 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
20469 # bo blink begin blink (not used in /etc/termcap)
20470 # be end blink (not used in /etc/termcap)
20471 # bb blink glitch (not used in /etc/termcap)
20472 # it dim begin dim (not used in /etc/termcap)
20473 # ie end dim (not used in /etc/termcap)
20474 # ig dim glitch (not used in /etc/termcap)
20476 # Finally, XENIX also used the following forms-drawing capabilities:
20478 # single double type ASCII approximation
20479 # ------ ------ ------------- -------------------
20480 # GV Gv vertical line |
20481 # GH Gv horizontal line - _
20482 # G1 G5 top right corner _ |
20483 # G2 G6 top left corner |
20484 # G3 G7 bottom left corner |_
20485 # G4 G8 bottom right corner _|
20486 # GD Gd down-tick character T
20487 # GL Gl left-tick character -|
20488 # GR Gr right-tick character |-
20489 # GC Gc middle intersection -|-
20490 # GU Gu up-tick character _|_
20492 # These were invented to take advantage of the IBM PC ROM character set. One
20493 # can compose an acsc string from the single-width characters as follows
20494 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
20495 # When translating a termcap file, ncurses tic will do this automatically.
20496 # The double forms characters don't fit the SVr4 terminfo model.
20500 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
20501 # nonstandard capabilities. Its signature is the KM capability, used to name
20502 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
20503 # set. Comments in the original, and a little cross-checking with other AT&T
20504 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
20505 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
20506 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
20507 # cursor invisible), and CV=:ve: (make cursor normal).
20511 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
20512 # have the System V capabilities up to SVr1 level. After that, it supports
20513 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
20514 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
20515 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
20516 # HP binary format incompatible with SVr4's.
20520 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
20521 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
20522 # capabilities following prtr_non with the following special capabilties:
20523 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
20524 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
20525 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
20526 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
20527 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
20528 # renamed (to kcbt and kslt). The places in the box[12] capabilities
20529 # correspond to acsc chars, here is the mapping:
20531 # box1[0] = ACS_ULCORNER
20532 # box1[1] = ACS_HLINE
20533 # box1[2] = ACS_URCORNER
20534 # box1[3] = ACS_VLINE
20535 # box1[4] = ACS_LRCORNER
20536 # box1[5] = ACS_LLCORNER
20537 # box1[6] = ACS_TTEE
20538 # box1[7] = ACS_RTEE
20539 # box1[8] = ACS_BTEE
20540 # box1[9] = ACS_LTEE
20541 # box1[10] = ACS_PLUS
20543 # The box2 characters are the double-line versions of these forms graphics.
20544 # The AIX binary terminfo format is incompatible with SVr4's.
20546 # Iris console extensions:
20548 # HS is half-intensity start; HE is half-intensity end
20549 # CT is color terminal type (for Curses & rogue)
20550 # CP is color change escape sequence
20551 # CZ are color names (for Curses & rogue)
20553 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
20557 # There is a set of extended termcaps associated with something
20558 # called the "Terminal Control" or TC package created by MainStream Systems,
20559 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
20560 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
20561 # that flags color terminals.
20563 ######## CHANGE HISTORY
20565 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
20566 # Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
20569 # This file contains all the capability information present in John Kunze's
20570 # last version of the termcap master file, except as noted in the change
20571 # comments at end of file. Some information about very ancient obsolete
20572 # capabilities has been moved to comments. Some all-numeric names of older
20573 # terminals have been retired.
20575 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
20576 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
20577 # used by BSD curses.
20579 # The 9.1.0 version of this file was translated from my lightly-edited copy of
20580 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
20581 # the purpose. Unless the ncurses tic implementation and the Lisp code were
20582 # making perfectly synchronized mistakes which I then failed to catch by
20583 # eyeball, the translation was correct and perfectly information-preserving.
20585 # Major version number bumps correspond to major version changes in ncurses.
20587 # Here is a log of the changes since then:
20589 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
20590 # * First terminfo master translated from 8.3.
20591 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
20592 # * Replaced Wyse entries with updated entries supplied by vendor.
20594 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
20595 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
20596 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
20597 # * Better XENIX keycap translation. Describe TC termcaps.
20598 # * Contact and history info supplied by Qume.
20599 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
20600 # * Raided the Shuford FTP site for recent termcaps/terminfos.
20601 # * Added information on X3.64 and VT100 standard escape sequences.
20602 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
20603 # * Added a correct X11R6 xterm entry.
20604 # * Fixed terminfo translations of padding.
20605 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
20606 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
20607 # * Added u6/u7/u8/u9 capabilities.
20608 # * Added PCVT entry.
20609 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
20610 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
20611 # to use reverse-video standout so Emacs will look right.
20612 # * Added el1 capability to ansi.
20613 # * Added smacs/rmacs to ansi.sys.
20615 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
20616 # * New mt70 entry.
20617 # * Added COPYRIGHTS AND OTHER DELUSIONS.
20618 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
20619 # smartvid & smarterm, ampex 175 & 219 & 232,
20620 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
20621 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
20622 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
20623 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
20624 # * Replaced the Perkin-Elmer entries with vendor's official ones.
20625 # * Restored the old minimal-ansi entry, luna needs it.
20626 # * Fixed some incorrect ip and proportional-padding translations.
20627 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
20628 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
20629 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
20630 # to force a particular height.
20631 # * Added beehive4 and reorganized other Harris entries.
20632 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
20633 # * Merged in DEC's official entries for its terminals. The only old
20634 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
20635 # * Replaced the translated BBN Bitgraph entries with purpose-built
20636 # ones from AT&T's SVr3.
20637 # * Replaced the AT&T entries with AT&T's official terminfos.
20638 # * Added teleray 16, vc415, cops10.
20639 # * Merged in many individual capabilities from SCO terminfo files.
20640 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
20642 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
20643 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
20644 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
20645 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
20646 # simterm, citoh and variants.
20647 # * Replaced sol entry with sol1 and sol2.
20648 # * Replaced Qume QVT and Freedom-series entries with purpose-built
20649 # terminfo entries.
20650 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
20651 # and dg200 entries using caps from from SCO.
20652 # * Added the usual set of function-key mappings to ANSI entry.
20653 # * Corrected xterm's function-key capabilities.
20654 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
20655 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
20656 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
20657 # * Fix in xterm entry, get the arrow keys right.
20658 # * Change some \0 escapes to \200.
20659 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
20660 # * Added apple (Videx card), adm1a, oadm31.
20661 # * Fixed malformed ampex csr.
20662 # * Fixed act4, cyb110; they had old-style prefix padding left in.
20663 # * Changed mandatory to advisory padding in many entries.
20664 # * Replaced HP entries up to hpsub with purpose-built ones.
20665 # * Blank rmir/smir/rmdc/smdc capabilities removed.
20666 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
20667 # 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
20668 # * Replaced the Ann Arbor entries with SCO's, the init strings are
20669 # more efficient (but the entries otherwise identical).
20670 # * Added dg211 from Shuford archive.
20671 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
20672 # adm42-nl, pc52, gs6300, xerox820, uts30.
20673 # * Pull SCO's padding into vi200 entry.
20674 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
20675 # entries merged in from SCO's descriptions.
20676 # * Fixed old-style prefix padding on zen50, h1500.
20677 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
20678 # entry from SCO's description.
20679 # * Reorganized the special entries.
20680 # * Added lm#0 to cbunix and virtual entries.
20682 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
20683 # * Restored cdc456tst.
20684 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
20685 # * Added megatek, beacon, microkit.
20686 # * Freeze for ncurses-1.9 release.
20687 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
20688 # * Added historical data for TAB.
20689 # * Comment fixes from David MacKenzie.
20690 # * Added the new BSDI pc3 entry.
20691 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
20692 # * A change in the tic -C logic now ensures that all entries in
20693 # the termcap translation will fit in < 1024 bytes.
20694 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
20695 # from GNU termcap file. This merges in all their local information.
20696 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
20697 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
20698 # * Added warnings about entries with long translations (restoring
20699 # all the GNU termcaps pushes a few over the edge).
20700 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
20701 # * Yet another tic change, and a couple of entry tweaks, to reduce the
20702 # number of long (> 1024) termcap translations back to 0.
20704 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
20705 # * Added kf13-kf20 to Linux entry.
20706 # * Regularize Prime terminal names.
20707 # * Historical data on Synertek.
20708 # * Freeze for ncurses-1.9.1.
20709 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
20710 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
20711 # * Eliminate whitespace in short name fields, this tanks some scripts.
20712 # * Name field changes to shorten some long entries.
20713 # * Termcap translation now automatically generates empty rmir/smir
20714 # when ich1/ich is present (copes with an ancient vi bug).
20715 # * Added `screen' entries from FSF's screen-3.6.2.
20716 # * Added linux-nic and xterm-nic entries.
20717 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
20718 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
20719 # eliminating some special-case code in ncurses.
20721 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
20722 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
20723 # that captures everything unique from it.
20724 # * Added reorder script generator.
20725 # * Freeze for ncurses 1.9.2 release.
20726 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
20727 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
20728 # * Added Olaf Siebert's corrections for adm12.
20729 # * ansi-pc-color now includes the colors and pairs caps, so that
20730 # entries which use it will inherit them automatically.
20731 # * The linux entry can now recognize the center (keypad 5) key.
20732 # * Removed some junk that found its way into Linux acsc.
20734 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
20735 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
20736 # * xterm doesn't try to use application keypad mode any more.
20737 # * Freeze for ncurses-1.9.3 release.
20738 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
20739 # * Added corrected sun entry from vendor.
20740 # * Added csr capability to linux entry.
20741 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
20742 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
20743 # * Some commented-out caps in long entries come back in, my code
20744 # for computing string-table lengths had a bug in it.
20745 # * pcansi series modified to fit comm-program reality better.
20746 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
20747 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
20748 # * Correct some bad aliases in the pcansi series
20749 # * Added entry for QNX console.
20750 # * Clean up duplicate long names for use with 4.4 library.
20751 # * Change vt100 standout to be normal reverse vide, not bright reverse;
20752 # this makes the Emacs status line look better.
20753 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
20754 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
20755 # * Minor surgery, mostly on name strings, to shorten termcap version.
20757 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
20758 # * Added dec-vt100 for use with the EWAN emulator.
20759 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
20760 # * Freeze for 1.9.5 alpha release.
20761 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
20762 # * Changed xterm lines to 24, the X11R6 default.
20763 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
20764 # * Added 7 newly discovered, undocumented acsc characters to linux
20765 # entry (the pryz{|} characters).
20766 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
20767 # * Correct two typos in the xterm entries introduced in 9.9.1.
20768 # * I finally figured out how to translate ko capabilities. Done.
20769 # * Added tvi921 entries from Tim Theisen.
20770 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
20771 # * Removed mystery tec entry, it was neither interesting nor useful.
20772 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
20773 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
20774 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
20775 # by making them relative to use capabilities
20776 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
20777 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
20778 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
20780 # * Translate all home=\E[;H capabilities to home=\E[H, they're
20782 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
20783 # vt100 and ANSI-like terminals.
20784 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
20785 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
20786 # does this now, too.
20787 # * fviewpoint is gone, it duplicated screwpoint.
20788 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
20789 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
20790 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
20791 # The UW vi50 replaces the old one, which becomes vi50adm,
20792 # * No more embedded commas in name fields.
20794 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
20795 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
20796 # * Introduced klone+* entries for describing Intel-console behavior.
20797 # * Linux kbs is default-mapped to delete for some brain-dead reason.
20798 # * -nsl -> -ns. The -pp syntax is obsolete.
20799 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
20800 # * Make xterm entry do application-keypad mode again. I got complaints
20801 # that it was messing up someone's 3270 emulator.
20802 # * Added some longname fields in order to avoid warning messages from
20803 # older tic implementations.
20804 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
20805 # it! (This gives us pi, greater than, less than, and a few more.)
20806 # * Freeze for ncurses-1.9.6 release.
20807 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
20808 # * Add xon to a number of console entries, they're memory-mapped and
20809 # don't need padding.
20810 # * Correct the use dependencies in the ansi series.
20811 # * Hand-translate more XENIX capabilities.
20812 # * Added hpterm entry for HP's X terminal emulator.
20813 # * Added aixterm entries.
20814 # * Shortened four names so everything fits in 14 chars.
20816 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
20817 # * Added ibcs2 entry and info on iBCS2 standard.
20818 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
20819 # * We can handle the HP meml/memu capability now.
20820 # * Added smacs to klone entries, just as documentation.
20821 # * Carrected ansi.sys and cit-500 entries.
20822 # * Added z39, vt320-k311, v220c, and avatar entries.
20823 # * Make pcansi use the ansi.sys invis capability.
20824 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
20825 # tvi925, tvi950, dt80, ncr7900i, h19.
20826 # * X3.64 has been withdrawn, change some references.
20827 # * Removed function keys from ansi-m entry.
20828 # * Corrected ansi.sys entry.
20829 # * Freeze for ncurses-1.9.7 release.
20830 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
20831 # * Added rmam/smam capabilities to many entries based on init strings.
20832 # * Added correct hpa/vpa to linux.
20833 # * Reduced several entries relative to vt52.
20834 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
20835 # * Exiled some utterly unidentifiable custom and homebrew types to the
20836 # UFO file; also, obsolete small-screen hardware; also, entries which
20837 # look flat-out incorrect, garbled, or redundant. These include the
20838 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
20839 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
20840 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
20841 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
20842 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
20843 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
20844 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
20845 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
20846 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
20847 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
20848 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
20849 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
20850 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
20851 # * Corrected pcvt25h as suggested by Brian C. Grayson
20852 # <bgrayson@pine.ece.utexas.edu>.
20853 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
20854 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
20855 # * Added kent=\EOM to xterm entry.
20857 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
20858 # * Corrected gigi entry.
20859 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
20860 # bad hpa/vpa capabilities.
20861 # * Corrected flash strings to have a uniform delay of .2 sec. No
20862 # more speed-dependent NUL-padding!
20863 # * terminfo capabilities in comments bracketed with <>.
20864 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
20865 # * Replaced pcvt with the 3.31 pcvt entries.
20866 # * Freeze for 1.9.7a.
20867 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
20868 # * Added emu entry from the X11R6 contrib tape sources.
20870 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
20871 # * Improved iris-ansi and sun entries.
20872 # * More flash string improvements.
20873 # * Corrected wy160 & wy160 as suggested by Robert Dunn
20874 # * Added dim to at386.
20875 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
20876 # he's ready to start using the termcap generated from this one.
20877 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
20878 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
20879 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
20880 # att610, att620, att630,
20881 # * Changed hazeltine name prefix from h to hz.
20882 # * Sent t500 to the UFI file.
20883 # * I think we've sucked all the juice out of BSDI's termcap file now.
20884 # * Freeze for ncurses 1.9.8 release
20885 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
20886 # * Unfreeze, linux kbs needed to be fixed.
20887 # * Tim Theisen pinned down a bug in the DMD firmware.
20888 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
20889 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
20890 # (The broken ones had been shadowed by sgr.)
20891 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
20892 # * Added documentation on ECMA-48 standard.
20893 # * New Amiga entry.
20894 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
20895 # * More ECMA-48 stuff
20896 # * Corrected typo in minix entry, added pc-minix.
20897 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
20898 # * Added rxvt entry.
20899 # * Added 1.3.x color-change capabilities to linux entry.
20900 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
20901 # * Corrected rxvt entry khome/kend.
20902 # * Corrected linux color change capabilities.
20903 # * NeXT entries from Dave Wetzel.
20904 # * Cleaned up if and rf file names (all in /usr/share now).
20905 # * Changed linux op capability to avoid screwing up a background color
20906 # pair set by setterm.
20907 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
20908 # * Added xterm-sun.
20909 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
20912 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
20913 # * Another sweep through the Shuford archive looking for new info.
20914 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
20915 # * Added st52 from Per Persson.
20916 # * Added eterm from the GNU Emacs 19.30 distribution.
20917 # * Freeze for 1.9.9.
20918 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
20919 # * FreeBSD console entries from Andrew Chernov.
20920 # * Removed duplicate Atari st52 name.
20921 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
20922 # * xterm doesn't actually have ACS_BLOCK.
20923 # * Change klone+color setf/setb to simpler forms that can be
20924 # translated into termcap.
20926 # * Removed mechanically-generated junk capabilities from cons* entries.
20927 # * Added color support to bsdos.
20928 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
20929 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
20930 # * Created ecma+color, linux can use it. Also added ech to linux.
20931 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
20932 # * Add descriptions to FreeBSD console entries. Also shorten
20933 # some aliases to <= 14 chars for portability.
20934 # * Added x68k console
20935 # * Added OTbs to several VT-series entries.
20936 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
20937 # * screen entry update for 3.7.1 from Michael Alan Dorman.
20938 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
20939 # * kterm correction due to Kenji Rikitake.
20940 # * ACS correction in vt320-kll due to Phillippe De Muyter.
20941 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
20942 # * Sun console entry correction from J.T. Conklin.
20943 # * Changed all DEC VT300 and up terminals to use VT300 tab set
20944 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
20945 # * Added smul to linux entry (we never noticed it was missing
20946 # because of sgr!).
20947 # * Added rmln to hp+labels (deduced from other HP entries).
20948 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
20949 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
20950 # * Corrected vt220 acsc.
20951 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
20952 # this corresponds to reality and helps prevent some tic warnings.
20953 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
20954 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
20955 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
20956 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
20957 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
20958 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
20959 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
20960 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
20961 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
20962 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
20963 # ifmr, v3220, wy100q, tandem653, ibmaed.
20964 # * Added DWK terminal description.
20965 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
20966 # * Many entries now have highlights inherited from adm+sgr.
20967 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
20968 # * xtitle and xtitle-twm enable access to the X status line.
20969 # * Added linux-1.3.6 color palette caps in conventional format.
20970 # * Added adm1178 terminal.
20971 # * Move fos and apollo terminals to obsolete category.
20972 # * Aha! The BRL terminals file told us what the Iris extensions mean.
20973 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
20974 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
20976 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
20977 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
20978 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
20979 # * Corrected, from BRL termcap file: vi50.
20980 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
20981 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
20982 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
20983 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
20984 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
20985 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
20986 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
20987 # * Paired-attribute fixes to various terminals.
20988 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
20989 # * xterm entry corrections from Thomas Dickey.
20990 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
20991 # * Added t916 entry, translated from a termcap in SCO's support area.
20992 # * New qnx entry from Michael Hunter.
20993 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
20994 # * Added hpex2 from Ville Sulko.
20995 # * Fixed a bug that ran the qnx and pcvtXX together.
20996 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
20997 # * Added dtterm entry from Solaris CDE.
20998 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
20999 # * corrected pairs#8 typo in dtterm entry.
21001 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
21002 # * updated xterm entry to cover 3.1.2E's new features.
21003 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
21004 # * Added new minix entry
21005 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
21006 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
21007 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
21008 # * Added Prism entries and kt7ix.
21009 # * Caution notes about EWAN and tabset files.
21010 # * Changed /usr/lib/tabset -> /usr/share/tabset.
21011 # * Added acsc/rmacs/smacs to vt52.
21012 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
21013 # * Merged in Thomas Dickey's reorganization of the xterm entries;
21014 # added technical corrections to avoid warning messages.
21015 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
21016 # * Added rmso=\E[27m in Linux entry.
21017 # * Added koi8-r support for Linux console.
21018 # * Replace xterm entries with canonical ones from XFree86 3.2.
21019 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
21020 # * Added color_xterm from Jacob Mandelson
21021 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
21022 # * Back off the xterm entry to use r6 as a base.
21023 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
21024 # * Added dec-vt220 at Adrian Garside's request.
21026 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
21028 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
21029 # * Minor corrections to xterm entries.
21030 # * Replaced EWAN telnet entry.
21031 # * Dropped the reorder script generator. It was a fossil.
21032 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21033 # * Replaced minitel-2 entry.
21034 # * Added MGR, ansi-nt.
21035 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21036 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21037 # the 4.4BSD Lite2 file.
21039 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
21040 # * Use setaf/setab consistently with SVr4.
21041 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
21042 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
21043 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
21044 # * add xterm-16color, for XFree86 3.3
21045 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
21046 # * correct typo in emu
21047 # * correct typo in vt102-w (Robert Wuest)
21048 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
21049 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
21050 # * remove ech capability from rxvt (it does the wrong thing)
21051 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
21052 # * remove spurious newlines from several entries (hp+color, wy50,
21053 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
21055 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
21056 # * correct rmso capability of wy50-mc
21057 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
21058 # * add cbt to xterm-xf86-v32
21059 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
21060 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
21061 # other capabilities not in xterm-r6.
21062 # * remove alternate character set from kterm entry.
21063 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
21064 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
21065 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
21066 # * add xterm-8bit entry.
21067 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
21068 # * repair several places where early version of tic replaced \, with \\\,
21069 # * make acsc entries canonical form (sorted, uniq).
21070 # * modify acsc entries for linux, linux-koi8
21071 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
21072 # * add color, mouse support to kterm.
21073 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
21074 # * correct wy120 smxon/tbc capabilities which were stuck together.
21075 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
21076 # * add entry for xterm-xf86-v39t
21077 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
21078 # * add u8,u9 to sun-il description
21079 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
21080 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
21082 # * add hds200 description (Walter Skorski)
21083 # * add EMX 0.9b descriptions
21084 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
21085 # * rename xhpterm back to hpterm.
21086 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
21087 # * change initc in linux-c-nc to use 0..1000 range.
21088 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
21089 # * remove hpa/vpa from rxvt, which implements them incorrectly.
21090 # * add sgr0 for rxvt.
21091 # * remove bogus smacs/rmacs from EMX descriptions.
21092 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
21093 # * revised entry for att7300
21094 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
21095 # * use \0 rather than \200.
21096 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
21097 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
21098 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
21099 # * rename xterm-xf86-v39t to xterm-xf86-v40
21100 # * remove bold/underline from sun console entries since they're not
21102 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
21103 # * add beterm entry (Fred Fish)
21104 # * add irix-color/xwsh entry.
21105 # * turn ncv off for linux.
21106 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
21107 # * set ncv for FreeBSD console (treat colors with reverse specially).
21108 # * remove sgr string from qnx based on report by Xiaodan Tang
21109 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
21110 # * remove spurious commas from descriptions
21111 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
21112 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
21113 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21114 # apparently based on cp-866).
21116 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
21118 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
21119 # * Replaced minitel-2 entry.
21120 # * Added MGR, ansi-nt.
21121 # * Minor corrections to xterm entries.
21122 # * Replaced EWAN telnet entry.
21123 # * Dropped the reorder script generator. It was a fossil.
21124 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
21125 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
21126 # the 4.4BSD Lite2 file.
21127 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
21128 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
21129 # * Updated iris-ansi; corrected vt102-w.
21130 # * Switch base xterm entry to 3.3 level.
21131 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
21133 # * Removed rmir/smir from tv92B.
21135 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
21136 # * add hds200 description (Walter Skorski)
21137 # * add beterm entry (Fred Fish)
21138 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
21139 # iris-color entries.
21140 # * add emx entries.
21141 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
21142 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
21144 # * remove sgr string from qnx based on report by Xiaodan Tang
21145 # * Added u8/u9, removed rmul/smul from sun-il.
21146 # * 4.2 tic displays \0 rather than \200.
21147 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
21148 # apparently based on cp-866).
21149 # * Merged in Pavel Roskin's acsc for linux-koi8
21150 # * Corrected some erroneous \\'s to \.
21151 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
21152 # * II -> ii in pcvtXX, screen, xterm.
21153 # * Removed \n chars following ANSI escapes in sgr & friends.
21154 # * Updated Wyse entries.
21155 # * h19 corrections from Tim Pierce.
21156 # * Noted that the dm2500 has both ich and smir.
21157 # * added pccons for the Alpha under OSF/1.
21158 # * Added Sony NEWS workstation entries and cit101e-rv.
21159 # * Reverted `amiga'; to Kent Polk's version, as I'm told
21160 # the Verkuil entry messes up with Amiga Telnet.
21161 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
21162 # * Corrected attributions in 10.2.0 release notes.
21163 # * Scanned the Shuford archive for new terminfos and information.
21164 # * Removed sgr from qnx entry (Thomas Dickey).
21165 # * Added entries for ICL and Kokusai Data Systems terminals.
21166 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
21167 # * Incorporated att700 from the Boundless Technology FTP site.
21168 # * Miscellaneous contact-address and Web-page updates.
21170 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
21173 # * add nxterm and xterm-color terminfo description (request by Cristian
21174 # Gafton <gafton@redhat.com>).
21175 # * modify rxvt terminfo description to clear alternate screen before
21176 # switching back to normal screen, for compatibility with applications
21177 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
21178 # * modify linux terminfo description to reset color palette (reported
21179 # by Telford Tendys <telford@eng.uts.edu.au>).
21182 # * merge changes from current XFree86 xterm terminfo descriptions.
21185 # * Added minitel1 entries from Alexander Montaron.
21186 # * Added qnxt2 from Federico Bianchi.
21187 # * Added arm100 terminfo entries from Dave Millen.
21190 # * Added ncsa telnet entries from Francesco Potorti
21193 # * modify ncsa telnet entry to reflect color, other capabilities based on
21194 # examination of the source code - T.Dickey.
21197 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
21200 # * Added Francesco Potorti's tuned Wyse 99 entries.
21201 # * dtterm enacs correction from Alexander V. Lukyanov.
21202 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
21203 # * correct a typo in icl6404 entry.
21204 # * add xtermm and xtermc
21207 # * format most %'char' sequences to %{number}
21208 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
21209 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
21212 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
21213 # * correct initialization string in xterm-r5, add misc other features
21214 # to correspond with xterm patch 84 - TD
21217 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
21218 # * add Mathew Vernon's mach console entries
21219 # * corrections for ncsa function-keys (report by Larry Virden)
21222 # * change linux to use ncv#2, since underline does not work with color - TD
21225 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
21226 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
21227 # application modes, change kent to use the correct keypad code - TD
21230 # * add entry for Tera Term - TD
21233 # * minor improvements for teraterm entry - TD
21234 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
21235 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
21238 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
21239 # xterm and ncsa entries by removing the unneeded ones. Note that
21240 # some entries will return kend & khome versus kslt and kfnd, for
21241 # PC-style keyboards versus strict vt220 compatiblity - TD
21244 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
21246 # * add 'crt' entry - TD
21247 # * correct typos in 'linux-c' entry - TD
21250 # * update entries for BSD/OS console to use klone+sgr and klone+color
21251 # (Jeffrey C Honig)
21254 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
21257 # * add linux-lat, from RedHat patches to ncurses 4.2
21260 # * add complete set of default function-key definitions for scoansi - TD.
21263 # * add cnorm, cvvis for Linux 2.2 kernels
21266 # * add kmous to xterm-r5 -TD
21267 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
21268 # parent "use" clause -TD
21271 # * corrected cnorm, added el1 in 'screen' description -TD
21274 # * add ms-vt100 -TD
21277 # * corrections to beterm entry -TD
21280 # * add cygwin entry -TD
21283 # * minor corrections for beterm entry -TD
21286 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
21289 # * add amiga-8bit entry
21290 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
21291 # rcons-color, based on
21292 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
21293 # * add alias for iris-ansi-net
21296 # * corrected scoansi entry's acsc, some function keys, add color -TD
21299 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
21300 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
21301 # key mapping, leaving Potorti's entries more like he named them -TD
21302 # * remove enter/exit am-mode from cygwin -TD
21305 # * correct typos in several entries (missing '[' from CSI):
21306 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
21307 # strings for avt-ns -TD
21308 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
21311 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
21312 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
21313 # * add xterm-88color and xterm-256color -TD
21316 # * add "obsolete" termcap strings -TD
21317 # * add kvt and gnome entries -TD
21320 # * correct cup string for regent100 -TD
21323 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
21324 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
21325 # * change OTrs capabilities to rs2 -TD
21326 # * add obsolete and extended capabilities to 'screen' -TD
21329 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
21331 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
21332 # and adding kcbt -TD
21335 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
21336 # nonstandard resource settings -TD
21339 # * minor fixes for xterm-*, based on Debian #58530 -TD
21342 # * add several terminal types from esr's "11.0", as well as comments.
21343 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
21344 # vt220-8bit, vt220-old, wy85-8bit
21347 # * add several terminal types from esr's "11.0.1" (ansi-*).
21348 # * update OTxx capabilities for changes on 2000/3/4.
21349 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
21352 # * move screen's AX extension to ecma+color, modify several entries to
21353 # use that, adjusting ncv as needed -TD
21356 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
21357 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
21358 # in esr's version.
21361 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
21362 # * correct color definition for ibm3164, make minor changes to other
21363 # IBM terminal definitions based on recent terminfo descriptions -TD
21366 # * add mgterm, from NetBSD -TD
21367 # * add alias sun-cgsix for sun-ss5 as per NetBSD
21368 # * change cons25w to use rs2 for reset rather than rs1 -TD
21369 # * add rc/sc to aixterm based on manpage -TD
21372 # * remove ncv from xterm-16color, xterm-256color
21375 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
21378 # * add Eterm (Michael Jennings)
21381 # * add amiga-vnc entry.
21384 # * correct description of Top Gun Telnet.
21385 # * add kterm-color
21388 # * add qansi* entries from QNX ftp site.
21391 # * add Matrix Orbital entries by Eric Z. Ayers).
21392 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
21396 # * add S0, E0 extensions to screen's entry -TD
21399 # * several corrections based on tic's new parameter-checking code -TD
21400 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
21401 # bracketing sequences that reset video attributes (\E8 would restore
21405 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
21408 # * improved scoansi, based on SCO man-page, and testing console,
21409 # scoterm with tack -TD
21412 # * modify kterm to use acsc via SCS controls.
21415 # * screen 3.9.8 allows xterm mouse controls to pass-through
21418 # * remove spurious "%|" from some xterm entries.
21421 # * modify 'screen' khome/kend to match screen 3.09.08
21422 # * add examples of 'screen' customization (screen.xterm-xfree86,
21423 # screen.xterm-r6, screen.teraterm) -TD
21426 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
21427 # * add "Apple_Terminal" entries -Benjamin Sittler
21428 # * remove time-delays from "Apple_Terminal" entries -TD
21429 # * make sgr entries time-delays consistent with individual caps -TD
21432 # * corrected/updated screen.xterm-xfree86
21435 # * ELKS descriptions, from Federico Bianchi
21436 # * add u6 (CSR) to Eterm (Michael Jennings).
21439 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
21440 # tic which handles names no longer than 14 characters. Add
21441 # corresponding descriptions for the Darwin PowerPC console named
21442 # "xnuppc" -Benjamin Sittler
21445 # * change kbs in mach entries to ^? (Marcus Brinkmann).
21448 # * add "putty" entry -TD
21449 # * updated "Apple_Terminal" entries -Benjamin Sittler
21452 # * add ms-vt100-color entry -TD
21453 # * add "konsole" entries -TD
21456 # * update gnome entry to Redhat 7.2 -TD
21459 # * add kf13-kf48 strings to cons25w -TD
21460 # * add pcvt25-color entry -TD
21461 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
21462 # * improve some features of scoansi entry based on SCO's version -TD
21463 # * add scoansi-new entry corresponding to OpenServer 5.0.6
21466 # * add kcbt to screen entry -TD
21469 # * add rxvt-16color, ibm+16color, mvterm entries -TD
21472 # * split out linux-basic entry, making linux-c inherit from that, and
21473 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
21474 # the history of this console type -TD
21475 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
21476 # r/g/b parameters of initc are in the range 0 to 1000 -TD
21479 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
21482 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
21483 # in the latter -TD
21486 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
21487 # * ncr260wy350pp has only 16 color pairs -TD
21488 # * add sun-type4 from NetBSD -TD
21489 # * update xterm-xfree86 to current (patch 170) -TD
21490 # * add screen-bce, screen-s entries -TD
21491 # * add xterm-1002, xterm-1003 entries -TD
21494 # * update homepage for Top Gun Telnet/SSH
21497 # * reduce duplication in emx entries, added emx-base -TD
21500 # * corrected acs for screen.teraterm -TD
21501 # * add tkterm entry -TD
21504 # * cygwin changes from Charles Wilson:
21505 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
21506 # primary instead of nxterm, to match XFree86's xterm.terminfo
21507 # usage and to prevent circular links.
21508 # (rxvt): add additional codes from rxvt.org.
21509 # (rxvt-color): new alias
21510 # (rxvt-xpm): new alias
21511 # (rxvt-cygwin): like rxvt, but with special acsc codes.
21512 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
21513 # with a "native" MSWin GUI. Each takes different acsc codes,
21514 # which are both different from the "normal" rxvt's acsc.
21515 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
21516 # (cygwinDBG): ditto.
21519 # * update gnome terminal entries -TD
21522 # * add entries for djgpp 2.03 and 2.04 -TD
21525 # * add alias for vtnt -TD
21526 # * update xterm-xfree86 for XFree86 4.4 -TD
21529 # * add linux-vt (Andrey V Lukyanov)
21532 # * add screen.linux -TD
21535 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
21538 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
21539 # * add vt100+ and vt-utf8 entries -TD
21540 # * add uwin entry -TD
21543 # * add sgr strings to several common entries lacking them, e.g.,
21544 # screen, to make the entries more portable -TD
21545 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
21546 # * similar fixups for cvvis/cnorm various entries -TD
21549 # * remove 'ncv' from xterm-256color (patch 188) -TD
21553 # * add xterm-xf86-v44 -TD
21554 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
21555 # on G1 being used via an ISO-2022 escape sequence (report by
21556 # Juliusz Chroboczek) -TD
21557 # * add 'hurd' entry -TD
21560 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
21562 # * align with xterm #192's use of xterm-new -TD
21563 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
21564 # * make xterm-new the default "xterm" -TD
21567 # * minor fixes for emu -TD
21569 # * add rmam/smam to linux (Trevor Van Bremen)
21570 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
21571 # * fixes for avatar0 -TD
21572 # * fixes for vp3a+ -TD
21575 # * add xterm-pc-fkeys -TD
21576 # * review/update gnome and gnome-rh90 entries (prompted by
21577 # Redhat Bugzilla #122815) -TD
21578 # * review/update konsole entries -TD
21579 # * add sgr, correct sgr0 for kterm and mlterm -TD
21580 # * correct tsl string in kterm -TD
21583 # * make ncsa-m rmacs/smacs consistent with sgr -TD
21584 # * add sgr, rc/sc and ech to syscons entries -TD
21585 # * add function-keys to decansi -TD
21586 # * add sgr to mterm-ansi -TD
21587 # * add sgr, civis, cnorm to emu -TD
21588 # * correct/simplify cup in addrinfo -TD
21589 # * corrections for gnome and konsole entries
21590 # (Redhat Bugzilla #122815) -Hans de Goede
21591 # * modify DEC entries (vt220, etc), to add sgr string, and to use
21592 # ISO-2022 strings for rmacs/smacs -TD
21595 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
21598 # * improved putty entry -Robert de Bath
21601 # * remove dch/dch1 from rxvt because they are implemented inconsistently
21602 # with the common usage of bce/ech -TD
21603 # * remove khome from vt220 (vt220's have no home key) -TD
21604 # * add rxvt+pcfkeys -TD
21607 # * modify several entries to ensure xterm mouse and cursor visibility
21608 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
21609 # Eterm, screen. (The xterm entries are left alone - old ones for
21610 # compatibility, and the new ones do not require this change) -TD
21613 # * add morphos entry -Pavel Fedin
21614 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
21615 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
21618 # * update wsvt25 entry -TD
21621 # * update pairs for xterm-88color and xterm-256color to reflect the
21622 # ncurses extended-color support -TD
21625 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
21626 # * add aixterm-16color to demonstrate 16-color capability -TD
21629 # * add media-copy to vt100 -TD
21630 # * corrected acsc string for vt52 -TD
21633 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
21635 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
21638 # * re-corrected acsc string for vt52 -TD
21641 # * corrected sun-il sgr string which referred to bold and underline -TD
21642 # * add sun-color entry -TD
21645 # * modify sgr0 in several entries to reset alternate-charset as in the
21647 # * modify sgr string of prism9 to better match the individual
21651 # * correct order of use= in rxvt-basic -TD
21654 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
21657 # * other minor fixes to cygwin based on tack -TD
21658 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
21661 # * add nsterm-16color entry -TD
21662 # * remove ncv flag from xterm-16color -TD
21663 # * remove setf/setb from xterm-256color to match xterm #209 -TD
21664 # * update mlterm entry to 2.9.2 -TD
21667 # * fixes to make nsterm-16color match report
21668 # by Christian Ebert -Alain Bench
21671 # * add xterm+256color building block -TD
21672 # * add gnome-256color, putty-256color, rxvt-256color -TD
21675 # * add hpterm-color -TD
21678 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
21679 # * add gnome-fc5 (prompted by GenToo #122566) -TD
21680 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
21681 # * improve xterm-256color by combining the ibm+16color setaf/setab
21682 # strings with SGR 48. The setf/setb strings also are cancelled here
21683 # rather than omitted so derived entries will cancel those also -Alain
21687 # * add some notes regarding copyright to terminfo.src -TD
21688 # * use rxvt+pcfkeys in Eterm -TD
21689 # * remove km and flash from gnome, Eterm and rxvt since they do not work
21690 # as one would expect (km sends ESC rather than setting the 8th bit
21692 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
21693 # * add konsole-solaris -TD
21696 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
21697 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
21698 # * modify xterm-24 to inherit from "xterm" -TD
21699 # * add xiterm entry -TD
21700 # * add putty-vt100 entry -TD
21701 # * corrected spelling of Michael A Dorman's name, prompted by
21702 # http://www.advogato.org/person/mdorman/diary.html -TD
21705 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
21706 # * update xterm+pcfkeys to match xterm #216 -TD
21709 # * make descriptions of xterm entries consistent with its terminfo -TD
21712 # * add xfce, mgt -TD
21715 # * correct acsc string in kterm -TD
21718 # * add kon entry -TD
21719 # * remove invis from linux and related entries, add klone+sgr8 for those
21720 # that implement the feature (or have not been shown to lack it) -TD
21723 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
21724 # * minor improvements to rxvt+pcfkeys -TD
21727 # * fix a few typos in if/then/else expressions -TD
21730 # * add several GNU Screen variations with 16- and 256-colors, and
21731 # status line (Alain Bench).
21734 # * add Newbury Data entries (Jean-Charles Billaud).
21737 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
21740 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
21741 # * add konsole-256color entry -TD
21744 # * add 9term entry (request by Juhapekka Tolvanen) -TD
21747 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
21748 # * add shift-control- and control-modified keys for rxvt editing
21750 # * update mlterm entry to 2.9.3 -TD
21751 # * add mlterm+pcfkeys -TD
21754 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
21755 # xterm+pcc0, etc., to make the corresponding building blocks reflect
21756 # xterm's capabilities -TD
21757 # * add mrxvt entry -TD
21758 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
21761 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
21764 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
21765 # xterm starting with patch #216 -TD
21766 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
21767 # to match xterm #230 -TD
21768 # * extend xterm+pccX entries to match xterm #230 -TD
21769 # * add xterm+app, xterm+noapp, from xterm #230 -TD
21770 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
21773 # * add screen.rxvt -TD
21776 # * add screen+fkeys (prompted by Debian # 478094) -TD
21779 # * add screen.mlterm -TD
21780 # * improve mlterm and mlterm+pcfkeys -TD
21783 # * add Eterm-256color, Eterm-88color -TD
21784 # * add rxvt-88color -TD
21787 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
21788 # original to teraterm2.3 -TD
21789 # * update "gnome" to 2.22.3 -TD
21790 # * update "konsole" to 1.6.6 -TD
21791 # * add "aterm" -TD
21792 # * add "linux2.6.26" -TD
21794 # The following sets edit modes for GNU EMACS.
21799 # comment-start-skip:"^#+"
21800 # comment-start:"# "
21801 # compile-command:"tic -c terminfo.master"
21803 ######## SHANTIH! SHANTIH! SHANTIH!