contrib/ntp/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16 VPATH = @srcdir@
  17 am__is_gnu_make = { \
  18   if test -z '$(MAKELEVEL)'; then \
  19     false; \
  20   elif test -n '$(MAKE_HOST)'; then \
  21     true; \
  22   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  23     true; \
  24   else \
  25     false; \
  26   fi; \
  27 }
  28 am__make_running_with_option = \
  29   case $${target_option-} in \
  30       ?) ;; \
  31       *) echo "am__make_running_with_option: internal error: invalid" \
  32               "target option '$${target_option-}' specified" >&2; \
  33          exit 1;; \
  34   esac; \
  35   has_opt=no; \
  36   sane_makeflags=$$MAKEFLAGS; \
  37   if $(am__is_gnu_make); then \
  38     sane_makeflags=$$MFLAGS; \
  39   else \
  40     case $$MAKEFLAGS in \
  41       *\\[\ \   ]*) \
  42         bs=\\; \
  43         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  44           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  45     esac; \
  46   fi; \
  47   skip_next=no; \
  48   strip_trailopt () \
  49   { \
  50     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  51   }; \
  52   for flg in $$sane_makeflags; do \
  53     test $$skip_next = yes && { skip_next=no; continue; }; \
  54     case $$flg in \
  55       *=*|--*) continue;; \
  56         -*I) strip_trailopt 'I'; skip_next=yes;; \
  57       -*I?*) strip_trailopt 'I';; \
  58         -*O) strip_trailopt 'O'; skip_next=yes;; \
  59       -*O?*) strip_trailopt 'O';; \
  60         -*l) strip_trailopt 'l'; skip_next=yes;; \
  61       -*l?*) strip_trailopt 'l';; \
  62       -[dEDm]) skip_next=yes;; \
  63       -[JT]) skip_next=yes;; \
  64     esac; \
  65     case $$flg in \
  66       *$$target_option*) has_opt=yes; break;; \
  67     esac; \
  68   done; \
  69   test $$has_opt = yes
  70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  72 pkgdatadir = $(datadir)/@PACKAGE@
  73 pkgincludedir = $(includedir)/@PACKAGE@
  74 pkglibdir = $(libdir)/@PACKAGE@
  75 pkglibexecdir = $(libexecdir)/@PACKAGE@
  76 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  77 install_sh_DATA = $(install_sh) -c -m 644
  78 install_sh_PROGRAM = $(install_sh) -c
  79 install_sh_SCRIPT = $(install_sh) -c
  80 INSTALL_HEADER = $(INSTALL_DATA)
  81 transform = $(program_transform_name)
  82 NORMAL_INSTALL = :
  83 PRE_INSTALL = :
  84 POST_INSTALL = :
  85 NORMAL_UNINSTALL = :
  86 PRE_UNINSTALL = :
  87 POST_UNINSTALL = :
  88 build_triplet = @build@
  89 host_triplet = @host@
  90 subdir = .
  91 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  92 am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
  93         $(top_srcdir)/sntp/libopts/m4/stdnoreturn.m4 \
  94         $(top_srcdir)/sntp/m4/ax_c99_struct_init.m4 \
  95         $(top_srcdir)/sntp/m4/define_dir.m4 \
  96         $(top_srcdir)/sntp/m4/hms_search_lib.m4 \
  97         $(top_srcdir)/sntp/m4/libtool.m4 \
  98         $(top_srcdir)/sntp/m4/ltoptions.m4 \
  99         $(top_srcdir)/sntp/m4/ltsugar.m4 \
 100         $(top_srcdir)/sntp/m4/ltversion.m4 \
 101         $(top_srcdir)/sntp/m4/lt~obsolete.m4 \
 102         $(top_srcdir)/sntp/m4/ntp_af_unspec.m4 \
 103         $(top_srcdir)/sntp/m4/ntp_cacheversion.m4 \
 104         $(top_srcdir)/sntp/m4/ntp_compiler.m4 \
 105         $(top_srcdir)/sntp/m4/ntp_crosscompile.m4 \
 106         $(top_srcdir)/sntp/m4/ntp_crypto_rand.m4 \
 107         $(top_srcdir)/sntp/m4/ntp_debug.m4 \
 108         $(top_srcdir)/sntp/m4/ntp_dir_sep.m4 \
 109         $(top_srcdir)/sntp/m4/ntp_facilitynames.m4 \
 110         $(top_srcdir)/sntp/m4/ntp_googletest.m4 \
 111         $(top_srcdir)/sntp/m4/ntp_harden.m4 \
 112         $(top_srcdir)/sntp/m4/ntp_ipv6.m4 \
 113         $(top_srcdir)/sntp/m4/ntp_lib_m.m4 \
 114         $(top_srcdir)/sntp/m4/ntp_libevent.m4 \
 115         $(top_srcdir)/sntp/m4/ntp_libntp.m4 \
 116         $(top_srcdir)/sntp/m4/ntp_lineeditlibs.m4 \
 117         $(top_srcdir)/sntp/m4/ntp_locinfo.m4 \
 118         $(top_srcdir)/sntp/m4/ntp_openssl.m4 \
 119         $(top_srcdir)/sntp/m4/ntp_pkg_config.m4 \
 120         $(top_srcdir)/sntp/m4/ntp_problemtests.m4 \
 121         $(top_srcdir)/sntp/m4/ntp_prog_cc.m4 \
 122         $(top_srcdir)/sntp/m4/ntp_rlimit.m4 \
 123         $(top_srcdir)/sntp/m4/ntp_sntp.m4 \
 124         $(top_srcdir)/sntp/m4/ntp_unitytest.m4 \
 125         $(top_srcdir)/sntp/m4/ntp_ver_suffix.m4 \
 126         $(top_srcdir)/sntp/m4/ntp_vpathhack.m4 \
 127         $(top_srcdir)/sntp/m4/openldap-thread-check.m4 \
 128         $(top_srcdir)/sntp/m4/openldap.m4 \
 129         $(top_srcdir)/sntp/m4/os_cflags.m4 \
 130         $(top_srcdir)/sntp/m4/snprintf.m4 \
 131         $(top_srcdir)/sntp/m4/version.m4 $(top_srcdir)/configure.ac
 132 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 133         $(ACLOCAL_M4)
 134 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 135         $(am__configure_deps) $(am__DIST_COMMON)
 136 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 137  configure.lineno config.status.lineno
 138 mkinstalldirs = $(install_sh) -d
 139 CONFIG_HEADER = config.h
 140 CONFIG_CLEAN_FILES =
 141 CONFIG_CLEAN_VPATH_FILES =
 142 AM_V_P = $(am__v_P_@AM_V@)
 143 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 144 am__v_P_0 = false
 145 am__v_P_1 = :
 146 AM_V_GEN = $(am__v_GEN_@AM_V@)
 147 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 148 am__v_GEN_0 = @echo "  GEN     " $@;
 149 am__v_GEN_1 =
 150 AM_V_at = $(am__v_at_@AM_V@)
 151 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 152 am__v_at_0 = @
 153 am__v_at_1 =
 154 SOURCES =
 155 DIST_SOURCES =
 156 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 157         ctags-recursive dvi-recursive html-recursive info-recursive \
 158         install-data-recursive install-dvi-recursive \
 159         install-exec-recursive install-html-recursive \
 160         install-info-recursive install-pdf-recursive \
 161         install-ps-recursive install-recursive installcheck-recursive \
 162         installdirs-recursive pdf-recursive ps-recursive \
 163         tags-recursive uninstall-recursive
 164 am__can_run_installinfo = \
 165   case $$AM_UPDATE_INFO_DIR in \
 166     n|no|NO) false;; \
 167     *) (install-info --version) >/dev/null 2>&1;; \
 168   esac
 169 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 170   distclean-recursive maintainer-clean-recursive
 171 am__recursive_targets = \
 172   $(RECURSIVE_TARGETS) \
 173   $(RECURSIVE_CLEAN_TARGETS) \
 174   $(am__extra_recursive_targets)
 175 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 176         cscope distdir dist dist-all distcheck
 177 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 178         $(LISP)config.h.in
 179 # Read a list of newline-separated strings from the standard input,
 180 # and print each of them once, without duplicates.  Input order is
 181 # *not* preserved.
 182 am__uniquify_input = $(AWK) '\
 183   BEGIN { nonempty = 0; } \
 184   { items[$$0] = 1; nonempty = 1; } \
 185   END { if (nonempty) { for (i in items) print i; }; } \
 186 '
 187 # Make sure the list of sources is unique.  This is necessary because,
 188 # e.g., the same source file might be shared among _SOURCES variables
 189 # for different programs/libraries.
 190 am__define_uniq_tagged_files = \
 191   list='$(am__tagged_files)'; \
 192   unique=`for i in $$list; do \
 193     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 194   done | $(am__uniquify_input)`
 195 ETAGS = etags
 196 CTAGS = ctags
 197 CSCOPE = cscope
 198 DIST_SUBDIRS = $(SUBDIRS)
 199 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
 200         $(top_srcdir)/sntp/libevent/build-aux/ar-lib \
 201         $(top_srcdir)/sntp/libevent/build-aux/compile \
 202         $(top_srcdir)/sntp/libevent/build-aux/config.guess \
 203         $(top_srcdir)/sntp/libevent/build-aux/config.sub \
 204         $(top_srcdir)/sntp/libevent/build-aux/install-sh \
 205         $(top_srcdir)/sntp/libevent/build-aux/ltmain.sh \
 206         $(top_srcdir)/sntp/libevent/build-aux/missing ChangeLog \
 207         INSTALL NEWS README TODO sntp/libevent/build-aux/ar-lib \
 208         sntp/libevent/build-aux/compile \
 209         sntp/libevent/build-aux/config.guess \
 210         sntp/libevent/build-aux/config.sub \
 211         sntp/libevent/build-aux/depcomp \
 212         sntp/libevent/build-aux/install-sh \
 213         sntp/libevent/build-aux/ltmain.sh \
 214         sntp/libevent/build-aux/missing sntp/libevent/build-aux/ylwrap
 215 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 216 distdir = $(PACKAGE)-$(VERSION)
 217 top_distdir = $(distdir)
 218 am__remove_distdir = \
 219   if test -d "$(distdir)"; then \
 220     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 221       && rm -rf "$(distdir)" \
 222       || { sleep 5 && rm -rf "$(distdir)"; }; \
 223   else :; fi
 224 am__post_remove_distdir = $(am__remove_distdir)
 225 am__relativize = \
 226   dir0=`pwd`; \
 227   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 228   sed_rest='s,^[^/]*/*,,'; \
 229   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 230   sed_butlast='s,/*[^/]*$$,,'; \
 231   while test -n "$$dir1"; do \
 232     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 233     if test "$$first" != "."; then \
 234       if test "$$first" = ".."; then \
 235         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 236         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 237       else \
 238         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 239         if test "$$first2" = "$$first"; then \
 240           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 241         else \
 242           dir2="../$$dir2"; \
 243         fi; \
 244         dir0="$$dir0"/"$$first"; \
 245       fi; \
 246     fi; \
 247     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 248   done; \
 249   reldir="$$dir2"
 250 DIST_ARCHIVES = $(distdir).tar.gz
 251 GZIP_ENV = --best
 252 DIST_TARGETS = dist-gzip
 253 distuninstallcheck_listfiles = find . -type f -print
 254 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 255   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 256 distcleancheck_listfiles = find . -type f -print
 257 ACLOCAL = @ACLOCAL@
 258 ALLOCA = @ALLOCA@
 259 AMTAR = @AMTAR@
 260 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 261 AR = @AR@
 262 AUTOCONF = @AUTOCONF@
 263 AUTOHEADER = @AUTOHEADER@
 264 AUTOMAKE = @AUTOMAKE@
 265 AWK = @AWK@
 266 BUILD_THREAD = @BUILD_THREAD@
 267 CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
 268 CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
 269 CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
 270 CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
 271 CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
 272 CC = @CC@
 273 CCDEPMODE = @CCDEPMODE@
 274 CFLAGS = @CFLAGS@
 275 CFLAGS_LIBEVENT = @CFLAGS_LIBEVENT@
 276 CFLAGS_NTP = @CFLAGS_NTP@
 277 CHUTEST = @CHUTEST@
 278 CONFIG_SHELL = @CONFIG_SHELL@
 279 CPP = @CPP@
 280 CPPFLAGS = @CPPFLAGS@
 281 CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
 282 CPPFLAGS_NTP = @CPPFLAGS_NTP@
 283 CYGPATH_W = @CYGPATH_W@
 284 DCFD = @DCFD@
 285 DEFS = @DEFS@
 286 DEPDIR = @DEPDIR@
 287 DLLTOOL = @DLLTOOL@
 288 DSYMUTIL = @DSYMUTIL@
 289 DUMPBIN = @DUMPBIN@
 290 ECHO_C = @ECHO_C@
 291 ECHO_N = @ECHO_N@
 292 ECHO_T = @ECHO_T@
 293 EDITLINE_LIBS = @EDITLINE_LIBS@
 294 EGREP = @EGREP@
 295 EXEEXT = @EXEEXT@
 296 FGREP = @FGREP@
 297 GREP = @GREP@
 298 GTEST_CONFIG = @GTEST_CONFIG@
 299 GTEST_CPPFLAGS = @GTEST_CPPFLAGS@
 300 GTEST_CXXFLAGS = @GTEST_CXXFLAGS@
 301 GTEST_LDFLAGS = @GTEST_LDFLAGS@
 302 GTEST_LIBS = @GTEST_LIBS@
 303 HAVE_INLINE = @HAVE_INLINE@
 304 HAVE_LEAPSMEARINTERVAL = @HAVE_LEAPSMEARINTERVAL@
 305 HAVE_RLIMIT_MEMLOCK = @HAVE_RLIMIT_MEMLOCK@
 306 HAVE_RLIMIT_STACK = @HAVE_RLIMIT_STACK@
 307 INSTALL = @INSTALL@
 308 INSTALL_DATA = @INSTALL_DATA@
 309 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 310 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 311 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 312 LD = @LD@
 313 LDADD_LIBEVENT = @LDADD_LIBEVENT@
 314 LDADD_LIBNTP = @LDADD_LIBNTP@
 315 LDADD_LIBUTIL = @LDADD_LIBUTIL@
 316 LDADD_NLIST = @LDADD_NLIST@
 317 LDADD_NTP = @LDADD_NTP@
 318 LDFLAGS = @LDFLAGS@
 319 LDFLAGS_NTP = @LDFLAGS_NTP@
 320 LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
 321 LIBM = @LIBM@
 322 LIBOBJS = @LIBOBJS@
 323 LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
 324 LIBOPTS_DIR = @LIBOPTS_DIR@
 325 LIBOPTS_LDADD = @LIBOPTS_LDADD@
 326 LIBPARSE = @LIBPARSE@
 327 LIBS = @LIBS@
 328 LIBTOOL = @LIBTOOL@
 329 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 330 LIPO = @LIPO@
 331 LN_S = @LN_S@
 332 LSCF = @LSCF@
 333 LTHREAD_LIBS = @LTHREAD_LIBS@
 334 LTLIBOBJS = @LTLIBOBJS@
 335 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 336 MAKEINFO = @MAKEINFO@
 337 MAKE_ADJTIMED = @MAKE_ADJTIMED@
 338 MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
 339 MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
 340 MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
 341 MAKE_LIBPARSE = @MAKE_LIBPARSE@
 342 MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
 343 MAKE_NTPDSIM = @MAKE_NTPDSIM@
 344 MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
 345 MAKE_NTPTIME = @MAKE_NTPTIME@
 346 MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
 347 MAKE_TICKADJ = @MAKE_TICKADJ@
 348 MAKE_TIMETRIM = @MAKE_TIMETRIM@
 349 MANIFEST_TOOL = @MANIFEST_TOOL@
 350 MANTAGFMT = @MANTAGFMT@
 351 MKDIR_P = @MKDIR_P@
 352 NM = @NM@
 353 NMEDIT = @NMEDIT@
 354 NTPDATE_DB = @NTPDATE_DB@
 355 NTPDATE_DL = @NTPDATE_DL@
 356 NTPDATE_DS = @NTPDATE_DS@
 357 NTPDATE_MS = @NTPDATE_MS@
 358 NTPDATE_NI = @NTPDATE_NI@
 359 NTPDC_DB = @NTPDC_DB@
 360 NTPDC_DL = @NTPDC_DL@
 361 NTPDC_DS = @NTPDC_DS@
 362 NTPDC_MS = @NTPDC_MS@
 363 NTPDC_NI = @NTPDC_NI@
 364 NTPDSIM_DB = @NTPDSIM_DB@
 365 NTPDSIM_DL = @NTPDSIM_DL@
 366 NTPDSIM_DS = @NTPDSIM_DS@
 367 NTPDSIM_MS = @NTPDSIM_MS@
 368 NTPDSIM_NI = @NTPDSIM_NI@
 369 NTPD_DB = @NTPD_DB@
 370 NTPD_DL = @NTPD_DL@
 371 NTPD_DS = @NTPD_DS@
 372 NTPD_MS = @NTPD_MS@
 373 NTPD_NI = @NTPD_NI@
 374 NTPQ_DB = @NTPQ_DB@
 375 NTPQ_DL = @NTPQ_DL@
 376 NTPQ_DS = @NTPQ_DS@
 377 NTPQ_MS = @NTPQ_MS@
 378 NTPQ_NI = @NTPQ_NI@
 379 NTPSNMPD_DB = @NTPSNMPD_DB@
 380 NTPSNMPD_DL = @NTPSNMPD_DL@
 381 NTPSNMPD_DS = @NTPSNMPD_DS@
 382 NTPSNMPD_MS = @NTPSNMPD_MS@
 383 NTPSNMPD_NI = @NTPSNMPD_NI@
 384 NTPSWEEP_DB = @NTPSWEEP_DB@
 385 NTPSWEEP_DL = @NTPSWEEP_DL@
 386 NTPSWEEP_DS = @NTPSWEEP_DS@
 387 NTPSWEEP_MS = @NTPSWEEP_MS@
 388 NTPSWEEP_NI = @NTPSWEEP_NI@
 389 NTPTIME_DB = @NTPTIME_DB@
 390 NTPTIME_DL = @NTPTIME_DL@
 391 NTPTIME_DS = @NTPTIME_DS@
 392 NTPTIME_MS = @NTPTIME_MS@
 393 NTPTIME_NI = @NTPTIME_NI@
 394 NTPTRACE_DB = @NTPTRACE_DB@
 395 NTPTRACE_DL = @NTPTRACE_DL@
 396 NTPTRACE_DS = @NTPTRACE_DS@
 397 NTPTRACE_MS = @NTPTRACE_MS@
 398 NTPTRACE_NI = @NTPTRACE_NI@
 399 NTP_HARD_CFLAGS = @NTP_HARD_CFLAGS@
 400 NTP_HARD_CPPFLAGS = @NTP_HARD_CPPFLAGS@
 401 NTP_HARD_LDFLAGS = @NTP_HARD_LDFLAGS@
 402 NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
 403 NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
 404 NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
 405 NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
 406 NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
 407 NTP_KEYSDIR = @NTP_KEYSDIR@
 408 NTP_WAIT_DB = @NTP_WAIT_DB@
 409 NTP_WAIT_DL = @NTP_WAIT_DL@
 410 NTP_WAIT_DS = @NTP_WAIT_DS@
 411 NTP_WAIT_MS = @NTP_WAIT_MS@
 412 NTP_WAIT_NI = @NTP_WAIT_NI@
 413 OBJDUMP = @OBJDUMP@
 414 OBJEXT = @OBJEXT@
 415 OTOOL = @OTOOL@
 416 OTOOL64 = @OTOOL64@
 417 PACKAGE = @PACKAGE@
 418 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 419 PACKAGE_NAME = @PACKAGE_NAME@
 420 PACKAGE_STRING = @PACKAGE_STRING@
 421 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 422 PACKAGE_URL = @PACKAGE_URL@
 423 PACKAGE_VERSION = @PACKAGE_VERSION@
 424 PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
 425 PATH_PERL = @PATH_PERL@
 426 PATH_RUBY = @PATH_RUBY@
 427 PATH_SEPARATOR = @PATH_SEPARATOR@
 428 PATH_TEST = @PATH_TEST@
 429 PERLLIBDIR = @PERLLIBDIR@
 430 PKG_CONFIG = @PKG_CONFIG@
 431 POSIX_SHELL = @POSIX_SHELL@
 432 PROPDELAY = @PROPDELAY@
 433 PTHREAD_LIBS = @PTHREAD_LIBS@
 434 RANLIB = @RANLIB@
 435 SED = @SED@
 436 SET_MAKE = @SET_MAKE@
 437 SHELL = @SHELL@
 438 SNMP_CFLAGS = @SNMP_CFLAGS@
 439 SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
 440 SNMP_LIBS = @SNMP_LIBS@
 441 SNTP = @SNTP@
 442 SNTP_DB = @SNTP_DB@
 443 SNTP_DL = @SNTP_DL@
 444 SNTP_DS = @SNTP_DS@
 445 SNTP_MS = @SNTP_MS@
 446 SNTP_NI = @SNTP_NI@
 447 STDNORETURN_H = @STDNORETURN_H@
 448 STRIP = @STRIP@
 449 TESTDCF = @TESTDCF@
 450 TICKADJ_DB = @TICKADJ_DB@
 451 TICKADJ_DL = @TICKADJ_DL@
 452 TICKADJ_DS = @TICKADJ_DS@
 453 TICKADJ_MS = @TICKADJ_MS@
 454 TICKADJ_NI = @TICKADJ_NI@
 455 TIMETRIM_DB = @TIMETRIM_DB@
 456 TIMETRIM_DL = @TIMETRIM_DL@
 457 TIMETRIM_DS = @TIMETRIM_DS@
 458 TIMETRIM_MS = @TIMETRIM_MS@
 459 TIMETRIM_NI = @TIMETRIM_NI@
 460 UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
 461 UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
 462 UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
 463 UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
 464 UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
 465 VERSION = @VERSION@
 466 VER_SUFFIX = @VER_SUFFIX@
 467 YACC = @YACC@
 468 YFLAGS = @YFLAGS@
 469 abs_builddir = @abs_builddir@
 470 abs_srcdir = @abs_srcdir@
 471 abs_top_builddir = @abs_top_builddir@
 472 abs_top_srcdir = @abs_top_srcdir@
 473 ac_ct_AR = @ac_ct_AR@
 474 ac_ct_CC = @ac_ct_CC@
 475 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 476 am__include = @am__include@
 477 am__leading_dot = @am__leading_dot@
 478 am__quote = @am__quote@
 479 am__tar = @am__tar@
 480 am__untar = @am__untar@
 481 bindir = @bindir@
 482 build = @build@
 483 build_alias = @build_alias@
 484 build_cpu = @build_cpu@
 485 build_os = @build_os@
 486 build_vendor = @build_vendor@
 487 builddir = @builddir@
 488 datadir = @datadir@
 489 datarootdir = @datarootdir@
 490 docdir = @docdir@
 491 dvidir = @dvidir@
 492 exec_prefix = @exec_prefix@
 493 host = @host@
 494 host_alias = @host_alias@
 495 host_cpu = @host_cpu@
 496 host_os = @host_os@
 497 host_vendor = @host_vendor@
 498 htmldir = @htmldir@
 499 includedir = @includedir@
 500 infodir = @infodir@
 501 install_sh = @install_sh@
 502 libdir = @libdir@
 503 libexecdir = @libexecdir@
 504 localedir = @localedir@
 505 localstatedir = @localstatedir@
 506 mandir = @mandir@
 507 mkdir_p = @mkdir_p@
 508 oldincludedir = @oldincludedir@
 509 pdfdir = @pdfdir@
 510 prefix = @prefix@
 511 program_transform_name = @program_transform_name@
 512 psdir = @psdir@
 513 sbindir = @sbindir@
 514 sharedstatedir = @sharedstatedir@
 515 srcdir = @srcdir@
 516 subdirs = @subdirs@
 517 sysconfdir = @sysconfdir@
 518 target_alias = @target_alias@
 519 top_build_prefix = @top_build_prefix@
 520 top_builddir = @top_builddir@
 521 top_srcdir = @top_srcdir@
 522 ACLOCAL_AMFLAGS = -I sntp/m4 -I sntp/libevent/m4 -I sntp/libopts/m4
 523 NULL =
 524
 525 # moved sntp first to get libtool and libevent built.
 526 SUBDIRS = \
 527         scripts         \
 528         include         \
 529         libntp          \
 530         sntp            \
 531         libparse        \
 532         ntpd            \
 533         ntpdate         \
 534         ntpdc           \
 535         ntpq            \
 536         ntpsnmpd        \
 537         parseutil       \
 538         adjtimed        \
 539         clockstuff      \
 540         kernel          \
 541         util            \
 542         tests           \
 543         $(NULL)
 544
 545 DISTCHECK_CONFIGURE_FLAGS = -C --with-sntp --enable-local-libevent $(NTP_DCF)
 546 EXTRA_DIST = \
 547         $(srcdir)/COPYRIGHT     \
 548         ChangeLog               \
 549         CommitLog               \
 550         CommitLog-4.1.0         \
 551         NEWS                    \
 552         NOTES.y2kfixes          \
 553         README.bk               \
 554         README.hackers          \
 555         README.leapsmear        \
 556         README.patches          \
 557         README.pullrequests     \
 558         README.refclocks        \
 559         README.versions         \
 560         TODO                    \
 561         WHERE-TO-START          \
 562         bootstrap               \
 563         build                   \
 564         config.h.in             \
 565         dot.emacs               \
 566         flock-build             \
 567         packageinfo.sh          \
 568         readme.y2kfixes         \
 569         results.y2kfixes        \
 570         \
 571         conf                    \
 572         html                    \
 573         lib/isc                 \
 574         libjsmn                 \
 575         ports                   \
 576         \
 577         deps-ver                \
 578         \
 579         $(NULL)
 580
 581 CLEANFILES =
 582 DISTCLEANFILES = .gcc-warning
 583
 584 # HMS: Keep .gcc-warning first, as that way it gets printed first.
 585 BUILT_SOURCES = \
 586         .gcc-warning                    \
 587         libtool                         \
 588         html/.datecheck                 \
 589         $(srcdir)/COPYRIGHT             \
 590         $(srcdir)/.checkChangeLog       \
 591         $(NULL)
 592
 593
 594 # HMS: The following seems to be a work-in-progress...
 595 CVO = `$(srcdir)/sntp/libevent/build-aux/config.guess`
 596 BHOST = `(hostname || uname -n)`
 597 all: $(BUILT_SOURCES) config.h
 598         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 599
 600 .SUFFIXES:
 601 am--refresh: Makefile
 602         @:
 603 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 604         @for dep in $?; do \
 605           case '$(am__configure_deps)' in \
 606             *$$dep*) \
 607               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 608               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 609                 && exit 0; \
 610               exit 1;; \
 611           esac; \
 612         done; \
 613         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 614         $(am__cd) $(top_srcdir) && \
 615           $(AUTOMAKE) --foreign Makefile
 616 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 617         @case '$?' in \
 618           *config.status*) \
 619             echo ' $(SHELL) ./config.status'; \
 620             $(SHELL) ./config.status;; \
 621           *) \
 622             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 623             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 624         esac;
 625
 626 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 627         $(SHELL) ./config.status --recheck
 628
 629 $(top_srcdir)/configure:  $(am__configure_deps)
 630         $(am__cd) $(srcdir) && $(AUTOCONF)
 631 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 632         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 633 $(am__aclocal_m4_deps):
 634
 635 config.h: stamp-h1
 636         @test -f $@ || rm -f stamp-h1
 637         @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 638
 639 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 640         @rm -f stamp-h1
 641         cd $(top_builddir) && $(SHELL) ./config.status config.h
 642 $(srcdir)/config.h.in:  $(am__configure_deps)
 643         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 644         rm -f stamp-h1
 645         touch $@
 646
 647 distclean-hdr:
 648         -rm -f config.h stamp-h1
 649
 650 mostlyclean-libtool:
 651         -rm -f *.lo
 652
 653 clean-libtool:
 654         -rm -rf .libs _libs
 655
 656 distclean-libtool:
 657         -rm -f libtool config.lt
 658
 659 # This directory's subdirectories are mostly independent; you can cd
 660 # into them and run 'make' without going through this Makefile.
 661 # To change the values of 'make' variables: instead of editing Makefiles,
 662 # (1) if the variable is set in 'config.status', edit 'config.status'
 663 #     (which will cause the Makefiles to be regenerated when you run 'make');
 664 # (2) otherwise, pass the desired values on the 'make' command line.
 665 $(am__recursive_targets):
 666         @fail=; \
 667         if $(am__make_keepgoing); then \
 668           failcom='fail=yes'; \
 669         else \
 670           failcom='exit 1'; \
 671         fi; \
 672         dot_seen=no; \
 673         target=`echo $@ | sed s/-recursive//`; \
 674         case "$@" in \
 675           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 676           *) list='$(SUBDIRS)' ;; \
 677         esac; \
 678         for subdir in $$list; do \
 679           echo "Making $$target in $$subdir"; \
 680           if test "$$subdir" = "."; then \
 681             dot_seen=yes; \
 682             local_target="$$target-am"; \
 683           else \
 684             local_target="$$target"; \
 685           fi; \
 686           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 687           || eval $$failcom; \
 688         done; \
 689         if test "$$dot_seen" = "no"; then \
 690           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 691         fi; test -z "$$fail"
 692
 693 ID: $(am__tagged_files)
 694         $(am__define_uniq_tagged_files); mkid -fID $$unique
 695 tags: tags-recursive
 696 TAGS: tags
 697
 698 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 699         set x; \
 700         here=`pwd`; \
 701         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 702           include_option=--etags-include; \
 703           empty_fix=.; \
 704         else \
 705           include_option=--include; \
 706           empty_fix=; \
 707         fi; \
 708         list='$(SUBDIRS)'; for subdir in $$list; do \
 709           if test "$$subdir" = .; then :; else \
 710             test ! -f $$subdir/TAGS || \
 711               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 712           fi; \
 713         done; \
 714         $(am__define_uniq_tagged_files); \
 715         shift; \
 716         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 717           test -n "$$unique" || unique=$$empty_fix; \
 718           if test $$# -gt 0; then \
 719             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 720               "$$@" $$unique; \
 721           else \
 722             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 723               $$unique; \
 724           fi; \
 725         fi
 726 ctags: ctags-recursive
 727
 728 CTAGS: ctags
 729 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 730         $(am__define_uniq_tagged_files); \
 731         test -z "$(CTAGS_ARGS)$$unique" \
 732           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 733              $$unique
 734
 735 GTAGS:
 736         here=`$(am__cd) $(top_builddir) && pwd` \
 737           && $(am__cd) $(top_srcdir) \
 738           && gtags -i $(GTAGS_ARGS) "$$here"
 739 cscope: cscope.files
 740         test ! -s cscope.files \
 741           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 742 clean-cscope:
 743         -rm -f cscope.files
 744 cscope.files: clean-cscope cscopelist
 745 cscopelist: cscopelist-recursive
 746
 747 cscopelist-am: $(am__tagged_files)
 748         list='$(am__tagged_files)'; \
 749         case "$(srcdir)" in \
 750           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 751           *) sdir=$(subdir)/$(srcdir) ;; \
 752         esac; \
 753         for i in $$list; do \
 754           if test -f "$$i"; then \
 755             echo "$(subdir)/$$i"; \
 756           else \
 757             echo "$$sdir/$$i"; \
 758           fi; \
 759         done >> $(top_builddir)/cscope.files
 760
 761 distclean-tags:
 762         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 763         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 764
 765 distdir: $(DISTFILES)
 766         $(am__remove_distdir)
 767         test -d "$(distdir)" || mkdir "$(distdir)"
 768         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 769         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 770         list='$(DISTFILES)'; \
 771           dist_files=`for file in $$list; do echo $$file; done | \
 772           sed -e "s|^$$srcdirstrip/||;t" \
 773               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 774         case $$dist_files in \
 775           */*) $(MKDIR_P) `echo "$$dist_files" | \
 776                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 777                            sort -u` ;; \
 778         esac; \
 779         for file in $$dist_files; do \
 780           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 781           if test -d $$d/$$file; then \
 782             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 783             if test -d "$(distdir)/$$file"; then \
 784               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 785             fi; \
 786             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 787               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 788               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 789             fi; \
 790             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 791           else \
 792             test -f "$(distdir)/$$file" \
 793             || cp -p $$d/$$file "$(distdir)/$$file" \
 794             || exit 1; \
 795           fi; \
 796         done
 797         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 798           if test "$$subdir" = .; then :; else \
 799             $(am__make_dryrun) \
 800               || test -d "$(distdir)/$$subdir" \
 801               || $(MKDIR_P) "$(distdir)/$$subdir" \
 802               || exit 1; \
 803             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 804             $(am__relativize); \
 805             new_distdir=$$reldir; \
 806             dir1=$$subdir; dir2="$(top_distdir)"; \
 807             $(am__relativize); \
 808             new_top_distdir=$$reldir; \
 809             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 810             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 811             ($(am__cd) $$subdir && \
 812               $(MAKE) $(AM_MAKEFLAGS) \
 813                 top_distdir="$$new_top_distdir" \
 814                 distdir="$$new_distdir" \
 815                 am__remove_distdir=: \
 816                 am__skip_length_check=: \
 817                 am__skip_mode_fix=: \
 818                 distdir) \
 819               || exit 1; \
 820           fi; \
 821         done
 822         $(MAKE) $(AM_MAKEFLAGS) \
 823           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 824           dist-hook
 825         -test -n "$(am__skip_mode_fix)" \
 826         || find "$(distdir)" -type d ! -perm -755 \
 827                 -exec chmod u+rwx,go+rx {} \; -o \
 828           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 829           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 830           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 831         || chmod -R a+r "$(distdir)"
 832 dist-gzip: distdir
 833         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 834         $(am__post_remove_distdir)
 835
 836 dist-bzip2: distdir
 837         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 838         $(am__post_remove_distdir)
 839
 840 dist-lzip: distdir
 841         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 842         $(am__post_remove_distdir)
 843
 844 dist-xz: distdir
 845         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 846         $(am__post_remove_distdir)
 847
 848 dist-tarZ: distdir
 849         @echo WARNING: "Support for distribution archives compressed with" \
 850                        "legacy program 'compress' is deprecated." >&2
 851         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 852         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 853         $(am__post_remove_distdir)
 854
 855 dist-shar: distdir
 856         @echo WARNING: "Support for shar distribution archives is" \
 857                        "deprecated." >&2
 858         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 859         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 860         $(am__post_remove_distdir)
 861
 862 dist-zip: distdir
 863         -rm -f $(distdir).zip
 864         zip -rq $(distdir).zip $(distdir)
 865         $(am__post_remove_distdir)
 866
 867 dist dist-all:
 868         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 869         $(am__post_remove_distdir)
 870
 871 # This target untars the dist file and tries a VPATH configuration.  Then
 872 # it guarantees that the distribution is self-contained by making another
 873 # tarfile.
 874 distcheck: dist
 875         case '$(DIST_ARCHIVES)' in \
 876         *.tar.gz*) \
 877           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 878         *.tar.bz2*) \
 879           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 880         *.tar.lz*) \
 881           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 882         *.tar.xz*) \
 883           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 884         *.tar.Z*) \
 885           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 886         *.shar.gz*) \
 887           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 888         *.zip*) \
 889           unzip $(distdir).zip ;;\
 890         esac
 891         chmod -R a-w $(distdir)
 892         chmod u+w $(distdir)
 893         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 894         chmod a-w $(distdir)
 895         test -d $(distdir)/_build || exit 0; \
 896         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 897           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 898           && am__cwd=`pwd` \
 899           && $(am__cd) $(distdir)/_build/sub \
 900           && ../../configure \
 901             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 902             $(DISTCHECK_CONFIGURE_FLAGS) \
 903             --srcdir=../.. --prefix="$$dc_install_base" \
 904           && $(MAKE) $(AM_MAKEFLAGS) \
 905           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 906           && $(MAKE) $(AM_MAKEFLAGS) check \
 907           && $(MAKE) $(AM_MAKEFLAGS) install \
 908           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 909           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 910           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 911                 distuninstallcheck \
 912           && chmod -R a-w "$$dc_install_base" \
 913           && ({ \
 914                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 915                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 916                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 917                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 918                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 919               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 920           && rm -rf "$$dc_destdir" \
 921           && $(MAKE) $(AM_MAKEFLAGS) dist \
 922           && rm -rf $(DIST_ARCHIVES) \
 923           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 924           && cd "$$am__cwd" \
 925           || exit 1
 926         $(am__post_remove_distdir)
 927         @(echo "$(distdir) archives ready for distribution: "; \
 928           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 929           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 930 distuninstallcheck:
 931         @test -n '$(distuninstallcheck_dir)' || { \
 932           echo 'ERROR: trying to run $@ with an empty' \
 933                '$$(distuninstallcheck_dir)' >&2; \
 934           exit 1; \
 935         }; \
 936         $(am__cd) '$(distuninstallcheck_dir)' || { \
 937           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 938           exit 1; \
 939         }; \
 940         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 941            || { echo "ERROR: files left after uninstall:" ; \
 942                 if test -n "$(DESTDIR)"; then \
 943                   echo "  (check DESTDIR support)"; \
 944                 fi ; \
 945                 $(distuninstallcheck_listfiles) ; \
 946                 exit 1; } >&2
 947 distcleancheck: distclean
 948         @if test '$(srcdir)' = . ; then \
 949           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 950           exit 1 ; \
 951         fi
 952         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 953           || { echo "ERROR: files left in build directory after distclean:" ; \
 954                $(distcleancheck_listfiles) ; \
 955                exit 1; } >&2
 956 check-am: all-am
 957 check: $(BUILT_SOURCES)
 958         $(MAKE) $(AM_MAKEFLAGS) check-recursive
 959 all-am: Makefile config.h
 960 installdirs: installdirs-recursive
 961 installdirs-am:
 962 install: $(BUILT_SOURCES)
 963         $(MAKE) $(AM_MAKEFLAGS) install-recursive
 964 install-exec: install-exec-recursive
 965 install-data: install-data-recursive
 966 uninstall: uninstall-recursive
 967
 968 install-am: all-am
 969         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 970
 971 installcheck: installcheck-recursive
 972 install-strip:
 973         if test -z '$(STRIP)'; then \
 974           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 975             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 976               install; \
 977         else \
 978           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 979             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 980             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 981         fi
 982 mostlyclean-generic:
 983
 984 clean-generic:
 985         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 986
 987 distclean-generic:
 988         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 989         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 990         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 991
 992 maintainer-clean-generic:
 993         @echo "This command is intended for maintainers to use"
 994         @echo "it deletes files that may require special tools to rebuild."
 995         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
 996 clean: clean-recursive
 997
 998 clean-am: clean-generic clean-libtool mostlyclean-am
 999
1000 distclean: distclean-recursive
1001         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1002         -rm -f Makefile
1003 distclean-am: clean-am distclean-generic distclean-hdr \
1004         distclean-libtool distclean-tags
1005
1006 dvi: dvi-recursive
1007
1008 dvi-am:
1009
1010 html: html-recursive
1011
1012 html-am:
1013
1014 info: info-recursive
1015
1016 info-am:
1017
1018 install-data-am: install-data-local
1019
1020 install-dvi: install-dvi-recursive
1021
1022 install-dvi-am:
1023
1024 install-exec-am:
1025
1026 install-html: install-html-recursive
1027
1028 install-html-am:
1029
1030 install-info: install-info-recursive
1031
1032 install-info-am:
1033
1034 install-man:
1035
1036 install-pdf: install-pdf-recursive
1037
1038 install-pdf-am:
1039
1040 install-ps: install-ps-recursive
1041
1042 install-ps-am:
1043
1044 installcheck-am:
1045
1046 maintainer-clean: maintainer-clean-recursive
1047         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1048         -rm -rf $(top_srcdir)/autom4te.cache
1049         -rm -f Makefile
1050 maintainer-clean-am: distclean-am maintainer-clean-generic
1051
1052 mostlyclean: mostlyclean-recursive
1053
1054 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
1055
1056 pdf: pdf-recursive
1057
1058 pdf-am:
1059
1060 ps: ps-recursive
1061
1062 ps-am:
1063
1064 uninstall-am: uninstall-local
1065
1066 .MAKE: $(am__recursive_targets) all check install install-am \
1067         install-strip
1068
1069 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
1070         am--refresh check check-am clean clean-cscope clean-generic \
1071         clean-libtool cscope cscopelist-am ctags ctags-am dist \
1072         dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
1073         dist-tarZ dist-xz dist-zip distcheck distclean \
1074         distclean-generic distclean-hdr distclean-libtool \
1075         distclean-tags distcleancheck distdir distuninstallcheck dvi \
1076         dvi-am html html-am info info-am install install-am \
1077         install-data install-data-am install-data-local install-dvi \
1078         install-dvi-am install-exec install-exec-am install-html \
1079         install-html-am install-info install-info-am install-man \
1080         install-pdf install-pdf-am install-ps install-ps-am \
1081         install-strip installcheck installcheck-am installdirs \
1082         installdirs-am maintainer-clean maintainer-clean-generic \
1083         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
1084         ps ps-am tags tags-am uninstall uninstall-am uninstall-local
1085
1086 .PRECIOUS: Makefile
1087
1088
1089 .gcc-warning:
1090         @echo "Compiling with GCC now generates lots of new warnings."
1091         @echo " "
1092         @echo "Don't be concerned. They're just warnings."
1093         @echo " "
1094         @echo "Don't send bug reports about the warnings, either."
1095         @echo " "
1096         @echo "Feel free to send patches that fix these warnings, though."
1097         @echo " "
1098         @sleep 1
1099         @touch $@
1100
1101 html/.datecheck: FRC.html
1102         cd $(srcdir)/html && \
1103         ../scripts/build/checkHtmlFileDates
1104
1105 libtool: $(LIBTOOL_DEPS)
1106         ./config.status --recheck
1107
1108 sntp/built-sources-only: FRC.sntp
1109         @cd sntp && $(MAKE) $(AM_MAKEFLAGS) built-sources-only
1110
1111 $(srcdir)/COPYRIGHT: $(srcdir)/html/copyright.html
1112         { echo "This file is automatically generated from html/copyright.html" ; \
1113           lynx -dump $(srcdir)/html/copyright.html ;} > COPYRIGHT.new \
1114         && mv -f COPYRIGHT.new $(srcdir)/COPYRIGHT
1115
1116 COPYRIGHT-please: $(srcdir)/COPYRIGHT
1117         @: do-nothing action to prevent default \
1118            This target is needed by sntp/Makefile.am on decrepit \
1119            FreeBSD 6.x make which fails with "make COPYRIGHT" \
1120            configured in $(srcdir) but "make ./COPYRIGHT" succeeds. \
1121            Rather than determine our $(srcdir) from sntp/Makefile.am \
1122            COPYRIGHT-please serves as a fixed target.
1123
1124 $(srcdir)/.checkChangeLog: $(srcdir)/ChangeLog $(srcdir)/scripts/build/checkChangeLog
1125         cd $(srcdir) && \
1126         ./scripts/build/checkChangeLog
1127
1128 dist-hook:
1129         @find $(distdir) -type d -name SCCS -print | xargs rm -rf
1130
1131 install-data-local:
1132         @echo "Installing stand-alone HTML documentation"
1133         @( cd $(srcdir) && \
1134                 for i in `find html -type d | grep -v SCCS` ; \
1135                 do $(INSTALL) -d $(DESTDIR)$(htmldir)/$$i ; done )
1136         @( cd $(srcdir) && \
1137                 for i in `find html -type f | grep -v SCCS` ; \
1138                 do $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; done )
1139
1140 uninstall-local:
1141                 rm -rf $(DESTDIR)$(htmldir)/html
1142
1143 CommitLog: FRC.CommitLog
1144         cd $(srcdir)                                    \
1145         && $(PATH_TEST) -e CommitLog                    \
1146                 -a SCCS/s.ChangeSet -ot CommitLog       \
1147         || scripts/build/genCommitLog
1148
1149 .buildcvo:
1150         echo "$(CVO)" > .buildcvo
1151
1152 .checkcvo: .buildcvo FRC.checkcvo
1153         @if [ "`cat .buildcvo`" != "$(CVO)" ];then      \
1154                 echo "This directory was configured for `cat .buildcvo`"; \
1155                 echo "but this machine is a $(CVO)";    \
1156                 exit 1; \
1157         fi
1158
1159 .buildhost:
1160         echo "$(BHOST)" > .buildhost
1161
1162 .checkhost: .buildhost FRC.checkhost
1163         @if [ "`cat .buildhost`" != "$(BHOST)" ];then   \
1164                 echo "Built on `cat .buildhost` but this is $(BHOST)"; \
1165                 echo " "; \
1166         fi
1167
1168 FRC.CommitLog FRC.checkcvo FRC.checkhost FRC.distwarn FRC.html FRC.sntp:
1169         @: do-nothing action prevents any default
1170
1171 # HMS: what was I trying to do with this?
1172 #dot.emacs: FRC.distwarn
1173
1174 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1175 # Otherwise a system limit (for SysV at least) may be exceeded.
1176 .NOEXPORT: