contrib/ntp/ntpdc/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # we traditionally installed software in bindir, while it should have gone
  18 # in sbindir.  Now that we offer a choice, look in the "other" installation
  19 # subdir to warn folks if there is another version there.
  20
  21
  22
  23 VPATH = @srcdir@
  24 am__is_gnu_make = { \
  25   if test -z '$(MAKELEVEL)'; then \
  26     false; \
  27   elif test -n '$(MAKE_HOST)'; then \
  28     true; \
  29   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  30     true; \
  31   else \
  32     false; \
  33   fi; \
  34 }
  35 am__make_running_with_option = \
  36   case $${target_option-} in \
  37       ?) ;; \
  38       *) echo "am__make_running_with_option: internal error: invalid" \
  39               "target option '$${target_option-}' specified" >&2; \
  40          exit 1;; \
  41   esac; \
  42   has_opt=no; \
  43   sane_makeflags=$$MAKEFLAGS; \
  44   if $(am__is_gnu_make); then \
  45     sane_makeflags=$$MFLAGS; \
  46   else \
  47     case $$MAKEFLAGS in \
  48       *\\[\ \   ]*) \
  49         bs=\\; \
  50         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  51           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  52     esac; \
  53   fi; \
  54   skip_next=no; \
  55   strip_trailopt () \
  56   { \
  57     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  58   }; \
  59   for flg in $$sane_makeflags; do \
  60     test $$skip_next = yes && { skip_next=no; continue; }; \
  61     case $$flg in \
  62       *=*|--*) continue;; \
  63         -*I) strip_trailopt 'I'; skip_next=yes;; \
  64       -*I?*) strip_trailopt 'I';; \
  65         -*O) strip_trailopt 'O'; skip_next=yes;; \
  66       -*O?*) strip_trailopt 'O';; \
  67         -*l) strip_trailopt 'l'; skip_next=yes;; \
  68       -*l?*) strip_trailopt 'l';; \
  69       -[dEDm]) skip_next=yes;; \
  70       -[JT]) skip_next=yes;; \
  71     esac; \
  72     case $$flg in \
  73       *$$target_option*) has_opt=yes; break;; \
  74     esac; \
  75   done; \
  76   test $$has_opt = yes
  77 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  78 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  79 pkgdatadir = $(datadir)/@PACKAGE@
  80 pkgincludedir = $(includedir)/@PACKAGE@
  81 pkglibdir = $(libdir)/@PACKAGE@
  82 pkglibexecdir = $(libexecdir)/@PACKAGE@
  83 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  84 install_sh_DATA = $(install_sh) -c -m 644
  85 install_sh_PROGRAM = $(install_sh) -c
  86 install_sh_SCRIPT = $(install_sh) -c
  87 INSTALL_HEADER = $(INSTALL_DATA)
  88 transform = $(program_transform_name)
  89 NORMAL_INSTALL = :
  90 PRE_INSTALL = :
  91 POST_INSTALL = :
  92 NORMAL_UNINSTALL = :
  93 PRE_UNINSTALL = :
  94 POST_UNINSTALL = :
  95 build_triplet = @build@
  96 host_triplet = @host@
  97 EXTRA_PROGRAMS = ntpdc$(EXEEXT) ntpdc-layout$(EXEEXT)
  98 subdir = ntpdc
  99 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 100 am__aclocal_m4_deps = $(top_srcdir)/sntp/libopts/m4/libopts.m4 \
 101         $(top_srcdir)/sntp/libopts/m4/stdnoreturn.m4 \
 102         $(top_srcdir)/sntp/m4/ax_c99_struct_init.m4 \
 103         $(top_srcdir)/sntp/m4/define_dir.m4 \
 104         $(top_srcdir)/sntp/m4/hms_search_lib.m4 \
 105         $(top_srcdir)/sntp/m4/libtool.m4 \
 106         $(top_srcdir)/sntp/m4/ltoptions.m4 \
 107         $(top_srcdir)/sntp/m4/ltsugar.m4 \
 108         $(top_srcdir)/sntp/m4/ltversion.m4 \
 109         $(top_srcdir)/sntp/m4/lt~obsolete.m4 \
 110         $(top_srcdir)/sntp/m4/ntp_af_unspec.m4 \
 111         $(top_srcdir)/sntp/m4/ntp_cacheversion.m4 \
 112         $(top_srcdir)/sntp/m4/ntp_compiler.m4 \
 113         $(top_srcdir)/sntp/m4/ntp_crosscompile.m4 \
 114         $(top_srcdir)/sntp/m4/ntp_crypto_rand.m4 \
 115         $(top_srcdir)/sntp/m4/ntp_debug.m4 \
 116         $(top_srcdir)/sntp/m4/ntp_dir_sep.m4 \
 117         $(top_srcdir)/sntp/m4/ntp_facilitynames.m4 \
 118         $(top_srcdir)/sntp/m4/ntp_googletest.m4 \
 119         $(top_srcdir)/sntp/m4/ntp_harden.m4 \
 120         $(top_srcdir)/sntp/m4/ntp_ipv6.m4 \
 121         $(top_srcdir)/sntp/m4/ntp_lib_m.m4 \
 122         $(top_srcdir)/sntp/m4/ntp_libevent.m4 \
 123         $(top_srcdir)/sntp/m4/ntp_libntp.m4 \
 124         $(top_srcdir)/sntp/m4/ntp_lineeditlibs.m4 \
 125         $(top_srcdir)/sntp/m4/ntp_locinfo.m4 \
 126         $(top_srcdir)/sntp/m4/ntp_openssl.m4 \
 127         $(top_srcdir)/sntp/m4/ntp_pkg_config.m4 \
 128         $(top_srcdir)/sntp/m4/ntp_problemtests.m4 \
 129         $(top_srcdir)/sntp/m4/ntp_prog_cc.m4 \
 130         $(top_srcdir)/sntp/m4/ntp_rlimit.m4 \
 131         $(top_srcdir)/sntp/m4/ntp_sntp.m4 \
 132         $(top_srcdir)/sntp/m4/ntp_unitytest.m4 \
 133         $(top_srcdir)/sntp/m4/ntp_ver_suffix.m4 \
 134         $(top_srcdir)/sntp/m4/ntp_vpathhack.m4 \
 135         $(top_srcdir)/sntp/m4/openldap-thread-check.m4 \
 136         $(top_srcdir)/sntp/m4/openldap.m4 \
 137         $(top_srcdir)/sntp/m4/os_cflags.m4 \
 138         $(top_srcdir)/sntp/m4/snprintf.m4 \
 139         $(top_srcdir)/sntp/m4/version.m4 $(top_srcdir)/configure.ac
 140 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 141         $(ACLOCAL_M4)
 142 DIST_COMMON = $(srcdir)/Makefile.am $(noinst_HEADERS) \
 143         $(am__DIST_COMMON)
 144 mkinstalldirs = $(install_sh) -d
 145 CONFIG_HEADER = $(top_builddir)/config.h
 146 CONFIG_CLEAN_FILES = nl.pl
 147 CONFIG_CLEAN_VPATH_FILES =
 148 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" \
 149         "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" \
 150         "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"
 151 PROGRAMS = $(bin_PROGRAMS) $(libexec_PROGRAMS) $(sbin_PROGRAMS)
 152 am_ntpdc_OBJECTS = ntpdc.$(OBJEXT) ntpdc_ops.$(OBJEXT) \
 153         ntpdc-opts.$(OBJEXT)
 154 ntpdc_OBJECTS = $(am_ntpdc_OBJECTS)
 155 am__DEPENDENCIES_1 =
 156 ntpdc_DEPENDENCIES = version.o $(am__DEPENDENCIES_1) \
 157         ../libntp/libntp.a $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 158         $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
 159         $(am__DEPENDENCIES_1)
 160 AM_V_lt = $(am__v_lt_@AM_V@)
 161 am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
 162 am__v_lt_0 = --silent
 163 am__v_lt_1 =
 164 ntpdc_layout_SOURCES = ntpdc-layout.c
 165 ntpdc_layout_OBJECTS = ntpdc-layout.$(OBJEXT)
 166 ntpdc_layout_DEPENDENCIES =
 167 AM_V_P = $(am__v_P_@AM_V@)
 168 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 169 am__v_P_0 = false
 170 am__v_P_1 = :
 171 AM_V_GEN = $(am__v_GEN_@AM_V@)
 172 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 173 am__v_GEN_0 = @echo "  GEN     " $@;
 174 am__v_GEN_1 =
 175 AM_V_at = $(am__v_at_@AM_V@)
 176 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 177 am__v_at_0 = @
 178 am__v_at_1 =
 179 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
 180 depcomp = $(SHELL) $(top_srcdir)/sntp/libevent/build-aux/depcomp
 181 am__depfiles_maybe = depfiles
 182 am__mv = mv -f
 183 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 184         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 185 LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 186         $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
 187         $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 188         $(AM_CFLAGS) $(CFLAGS)
 189 AM_V_CC = $(am__v_CC_@AM_V@)
 190 am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
 191 am__v_CC_0 = @echo "  CC      " $@;
 192 am__v_CC_1 =
 193 CCLD = $(CC)
 194 LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
 195         $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 196         $(AM_LDFLAGS) $(LDFLAGS) -o $@
 197 AM_V_CCLD = $(am__v_CCLD_@AM_V@)
 198 am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
 199 am__v_CCLD_0 = @echo "  CCLD    " $@;
 200 am__v_CCLD_1 =
 201 SOURCES = $(ntpdc_SOURCES) ntpdc-layout.c
 202 DIST_SOURCES = $(ntpdc_SOURCES) ntpdc-layout.c
 203 am__can_run_installinfo = \
 204   case $$AM_UPDATE_INFO_DIR in \
 205     n|no|NO) false;; \
 206     *) (install-info --version) >/dev/null 2>&1;; \
 207   esac
 208 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 209 am__vpath_adj = case $$p in \
 210     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 211     *) f=$$p;; \
 212   esac;
 213 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 214 am__install_max = 40
 215 am__nobase_strip_setup = \
 216   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 217 am__nobase_strip = \
 218   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 219 am__nobase_list = $(am__nobase_strip_setup); \
 220   for p in $$list; do echo "$$p $$p"; done | \
 221   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 222   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 223     if (++n[$$2] == $(am__install_max)) \
 224       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 225     END { for (dir in files) print dir, files[dir] }'
 226 am__base_list = \
 227   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 228   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 229 am__uninstall_files_from_dir = { \
 230   test -z "$$files" \
 231     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 232     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 233          $(am__cd) "$$dir" && rm -f $$files; }; \
 234   }
 235 man1dir = $(mandir)/man1
 236 man8dir = $(mandir)/man8
 237 NROFF = nroff
 238 MANS = $(man1_MANS) $(man8_MANS) $(man_MANS)
 239 DATA = $(html_DATA) $(noinst_DATA)
 240 HEADERS = $(noinst_HEADERS)
 241 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 242 # Read a list of newline-separated strings from the standard input,
 243 # and print each of them once, without duplicates.  Input order is
 244 # *not* preserved.
 245 am__uniquify_input = $(AWK) '\
 246   BEGIN { nonempty = 0; } \
 247   { items[$$0] = 1; nonempty = 1; } \
 248   END { if (nonempty) { for (i in items) print i; }; } \
 249 '
 250 # Make sure the list of sources is unique.  This is necessary because,
 251 # e.g., the same source file might be shared among _SOURCES variables
 252 # for different programs/libraries.
 253 am__define_uniq_tagged_files = \
 254   list='$(am__tagged_files)'; \
 255   unique=`for i in $$list; do \
 256     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 257   done | $(am__uniquify_input)`
 258 ETAGS = etags
 259 CTAGS = ctags
 260 am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/nl.pl.in \
 261         $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libopts.mf \
 262         $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf \
 263         $(top_srcdir)/sntp/check-libntp.mf \
 264         $(top_srcdir)/sntp/libevent/build-aux/depcomp README
 265 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 266 ACLOCAL = @ACLOCAL@
 267 ALLOCA = @ALLOCA@
 268 AMTAR = @AMTAR@
 269 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 270 AR = @AR@
 271 AUTOCONF = @AUTOCONF@
 272 AUTOHEADER = @AUTOHEADER@
 273 AUTOMAKE = @AUTOMAKE@
 274 AWK = @AWK@
 275 BUILD_THREAD = @BUILD_THREAD@
 276 CALC_TICKADJ_DB = @CALC_TICKADJ_DB@
 277 CALC_TICKADJ_DL = @CALC_TICKADJ_DL@
 278 CALC_TICKADJ_DS = @CALC_TICKADJ_DS@
 279 CALC_TICKADJ_MS = @CALC_TICKADJ_MS@
 280 CALC_TICKADJ_NI = @CALC_TICKADJ_NI@
 281 CC = @CC@
 282 CCDEPMODE = @CCDEPMODE@
 283 CFLAGS = @CFLAGS@
 284 CFLAGS_LIBEVENT = @CFLAGS_LIBEVENT@
 285 CFLAGS_NTP = @CFLAGS_NTP@
 286 CHUTEST = @CHUTEST@
 287 CONFIG_SHELL = @CONFIG_SHELL@
 288 CPP = @CPP@
 289 CPPFLAGS = @CPPFLAGS@
 290 CPPFLAGS_LIBEVENT = @CPPFLAGS_LIBEVENT@
 291 CPPFLAGS_NTP = @CPPFLAGS_NTP@
 292 CYGPATH_W = @CYGPATH_W@
 293 DCFD = @DCFD@
 294 DEFS = @DEFS@
 295 DEPDIR = @DEPDIR@
 296 DLLTOOL = @DLLTOOL@
 297 DSYMUTIL = @DSYMUTIL@
 298 DUMPBIN = @DUMPBIN@
 299 ECHO_C = @ECHO_C@
 300 ECHO_N = @ECHO_N@
 301 ECHO_T = @ECHO_T@
 302 EDITLINE_LIBS = @EDITLINE_LIBS@
 303 EGREP = @EGREP@
 304 EXEEXT = @EXEEXT@
 305 FGREP = @FGREP@
 306 GREP = @GREP@
 307 GTEST_CONFIG = @GTEST_CONFIG@
 308 GTEST_CPPFLAGS = @GTEST_CPPFLAGS@
 309 GTEST_CXXFLAGS = @GTEST_CXXFLAGS@
 310 GTEST_LDFLAGS = @GTEST_LDFLAGS@
 311 GTEST_LIBS = @GTEST_LIBS@
 312 HAVE_INLINE = @HAVE_INLINE@
 313 HAVE_LEAPSMEARINTERVAL = @HAVE_LEAPSMEARINTERVAL@
 314 HAVE_RLIMIT_MEMLOCK = @HAVE_RLIMIT_MEMLOCK@
 315 HAVE_RLIMIT_STACK = @HAVE_RLIMIT_STACK@
 316 INSTALL = @INSTALL@
 317 INSTALL_DATA = @INSTALL_DATA@
 318 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 319 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 320 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 321 LD = @LD@
 322 LDADD_LIBEVENT = @LDADD_LIBEVENT@
 323 LDADD_LIBNTP = @LDADD_LIBNTP@
 324 LDADD_LIBUTIL = @LDADD_LIBUTIL@
 325 LDADD_NLIST = @LDADD_NLIST@
 326 LDADD_NTP = @LDADD_NTP@
 327 LDFLAGS = @LDFLAGS@
 328 LDFLAGS_NTP = @LDFLAGS_NTP@
 329 LIBISC_PTHREADS_NOTHREADS = @LIBISC_PTHREADS_NOTHREADS@
 330 LIBM = @LIBM@
 331 LIBOBJS = @LIBOBJS@
 332 LIBOPTS_CFLAGS = @LIBOPTS_CFLAGS@
 333 LIBOPTS_DIR = @LIBOPTS_DIR@
 334 LIBOPTS_LDADD = @LIBOPTS_LDADD@
 335 LIBPARSE = @LIBPARSE@
 336 LIBS = @LIBS@
 337 LIBTOOL = @LIBTOOL@
 338 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 339 LIPO = @LIPO@
 340 LN_S = @LN_S@
 341 LSCF = @LSCF@
 342 LTHREAD_LIBS = @LTHREAD_LIBS@
 343 LTLIBOBJS = @LTLIBOBJS@
 344 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 345 MAKEINFO = @MAKEINFO@
 346 MAKE_ADJTIMED = @MAKE_ADJTIMED@
 347 MAKE_CHECK_LAYOUT = @MAKE_CHECK_LAYOUT@
 348 MAKE_CHECK_Y2K = @MAKE_CHECK_Y2K@
 349 MAKE_LIBNTPSIM = @MAKE_LIBNTPSIM@
 350 MAKE_LIBPARSE = @MAKE_LIBPARSE@
 351 MAKE_LIBPARSE_KERNEL = @MAKE_LIBPARSE_KERNEL@
 352 MAKE_NTPDSIM = @MAKE_NTPDSIM@
 353 MAKE_NTPSNMPD = @MAKE_NTPSNMPD@
 354 MAKE_NTPTIME = @MAKE_NTPTIME@
 355 MAKE_PARSEKMODULE = @MAKE_PARSEKMODULE@
 356 MAKE_TICKADJ = @MAKE_TICKADJ@
 357 MAKE_TIMETRIM = @MAKE_TIMETRIM@
 358 MANIFEST_TOOL = @MANIFEST_TOOL@
 359 MANTAGFMT = @MANTAGFMT@
 360 MKDIR_P = @MKDIR_P@
 361 NM = @NM@
 362 NMEDIT = @NMEDIT@
 363 NTPDATE_DB = @NTPDATE_DB@
 364 NTPDATE_DL = @NTPDATE_DL@
 365 NTPDATE_DS = @NTPDATE_DS@
 366 NTPDATE_MS = @NTPDATE_MS@
 367 NTPDATE_NI = @NTPDATE_NI@
 368 NTPDC_DB = @NTPDC_DB@
 369 NTPDC_DL = @NTPDC_DL@
 370 NTPDC_DS = @NTPDC_DS@
 371 NTPDC_MS = @NTPDC_MS@
 372 NTPDC_NI = @NTPDC_NI@
 373 NTPDSIM_DB = @NTPDSIM_DB@
 374 NTPDSIM_DL = @NTPDSIM_DL@
 375 NTPDSIM_DS = @NTPDSIM_DS@
 376 NTPDSIM_MS = @NTPDSIM_MS@
 377 NTPDSIM_NI = @NTPDSIM_NI@
 378 NTPD_DB = @NTPD_DB@
 379 NTPD_DL = @NTPD_DL@
 380 NTPD_DS = @NTPD_DS@
 381 NTPD_MS = @NTPD_MS@
 382 NTPD_NI = @NTPD_NI@
 383 NTPQ_DB = @NTPQ_DB@
 384 NTPQ_DL = @NTPQ_DL@
 385 NTPQ_DS = @NTPQ_DS@
 386 NTPQ_MS = @NTPQ_MS@
 387 NTPQ_NI = @NTPQ_NI@
 388 NTPSNMPD_DB = @NTPSNMPD_DB@
 389 NTPSNMPD_DL = @NTPSNMPD_DL@
 390 NTPSNMPD_DS = @NTPSNMPD_DS@
 391 NTPSNMPD_MS = @NTPSNMPD_MS@
 392 NTPSNMPD_NI = @NTPSNMPD_NI@
 393 NTPSWEEP_DB = @NTPSWEEP_DB@
 394 NTPSWEEP_DL = @NTPSWEEP_DL@
 395 NTPSWEEP_DS = @NTPSWEEP_DS@
 396 NTPSWEEP_MS = @NTPSWEEP_MS@
 397 NTPSWEEP_NI = @NTPSWEEP_NI@
 398 NTPTIME_DB = @NTPTIME_DB@
 399 NTPTIME_DL = @NTPTIME_DL@
 400 NTPTIME_DS = @NTPTIME_DS@
 401 NTPTIME_MS = @NTPTIME_MS@
 402 NTPTIME_NI = @NTPTIME_NI@
 403 NTPTRACE_DB = @NTPTRACE_DB@
 404 NTPTRACE_DL = @NTPTRACE_DL@
 405 NTPTRACE_DS = @NTPTRACE_DS@
 406 NTPTRACE_MS = @NTPTRACE_MS@
 407 NTPTRACE_NI = @NTPTRACE_NI@
 408 NTP_HARD_CFLAGS = @NTP_HARD_CFLAGS@
 409 NTP_HARD_CPPFLAGS = @NTP_HARD_CPPFLAGS@
 410 NTP_HARD_LDFLAGS = @NTP_HARD_LDFLAGS@
 411 NTP_KEYGEN_DB = @NTP_KEYGEN_DB@
 412 NTP_KEYGEN_DL = @NTP_KEYGEN_DL@
 413 NTP_KEYGEN_DS = @NTP_KEYGEN_DS@
 414 NTP_KEYGEN_MS = @NTP_KEYGEN_MS@
 415 NTP_KEYGEN_NI = @NTP_KEYGEN_NI@
 416 NTP_KEYSDIR = @NTP_KEYSDIR@
 417 NTP_WAIT_DB = @NTP_WAIT_DB@
 418 NTP_WAIT_DL = @NTP_WAIT_DL@
 419 NTP_WAIT_DS = @NTP_WAIT_DS@
 420 NTP_WAIT_MS = @NTP_WAIT_MS@
 421 NTP_WAIT_NI = @NTP_WAIT_NI@
 422 OBJDUMP = @OBJDUMP@
 423 OBJEXT = @OBJEXT@
 424 OTOOL = @OTOOL@
 425 OTOOL64 = @OTOOL64@
 426 PACKAGE = @PACKAGE@
 427 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 428 PACKAGE_NAME = @PACKAGE_NAME@
 429 PACKAGE_STRING = @PACKAGE_STRING@
 430 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 431 PACKAGE_URL = @PACKAGE_URL@
 432 PACKAGE_VERSION = @PACKAGE_VERSION@
 433 PATH_NET_SNMP_CONFIG = @PATH_NET_SNMP_CONFIG@
 434 PATH_PERL = @PATH_PERL@
 435 PATH_RUBY = @PATH_RUBY@
 436 PATH_SEPARATOR = @PATH_SEPARATOR@
 437 PATH_TEST = @PATH_TEST@
 438 PERLLIBDIR = @PERLLIBDIR@
 439 PKG_CONFIG = @PKG_CONFIG@
 440 POSIX_SHELL = @POSIX_SHELL@
 441 PROPDELAY = @PROPDELAY@
 442 PTHREAD_LIBS = @PTHREAD_LIBS@
 443 RANLIB = @RANLIB@
 444 SED = @SED@
 445 SET_MAKE = @SET_MAKE@
 446 SHELL = @SHELL@
 447 SNMP_CFLAGS = @SNMP_CFLAGS@
 448 SNMP_CPPFLAGS = @SNMP_CPPFLAGS@
 449 SNMP_LIBS = @SNMP_LIBS@
 450 SNTP = @SNTP@
 451 SNTP_DB = @SNTP_DB@
 452 SNTP_DL = @SNTP_DL@
 453 SNTP_DS = @SNTP_DS@
 454 SNTP_MS = @SNTP_MS@
 455 SNTP_NI = @SNTP_NI@
 456 STDNORETURN_H = @STDNORETURN_H@
 457 STRIP = @STRIP@
 458 TESTDCF = @TESTDCF@
 459 TICKADJ_DB = @TICKADJ_DB@
 460 TICKADJ_DL = @TICKADJ_DL@
 461 TICKADJ_DS = @TICKADJ_DS@
 462 TICKADJ_MS = @TICKADJ_MS@
 463 TICKADJ_NI = @TICKADJ_NI@
 464 TIMETRIM_DB = @TIMETRIM_DB@
 465 TIMETRIM_DL = @TIMETRIM_DL@
 466 TIMETRIM_DS = @TIMETRIM_DS@
 467 TIMETRIM_MS = @TIMETRIM_MS@
 468 TIMETRIM_NI = @TIMETRIM_NI@
 469 UPDATE_LEAP_DB = @UPDATE_LEAP_DB@
 470 UPDATE_LEAP_DL = @UPDATE_LEAP_DL@
 471 UPDATE_LEAP_DS = @UPDATE_LEAP_DS@
 472 UPDATE_LEAP_MS = @UPDATE_LEAP_MS@
 473 UPDATE_LEAP_NI = @UPDATE_LEAP_NI@
 474 VERSION = @VERSION@
 475 VER_SUFFIX = @VER_SUFFIX@
 476 YACC = @YACC@
 477 YFLAGS = @YFLAGS@
 478 abs_builddir = @abs_builddir@
 479 abs_srcdir = @abs_srcdir@
 480 abs_top_builddir = @abs_top_builddir@
 481 abs_top_srcdir = @abs_top_srcdir@
 482 ac_ct_AR = @ac_ct_AR@
 483 ac_ct_CC = @ac_ct_CC@
 484 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 485 am__include = @am__include@
 486 am__leading_dot = @am__leading_dot@
 487 am__quote = @am__quote@
 488 am__tar = @am__tar@
 489 am__untar = @am__untar@
 490 bindir = @bindir@
 491 build = @build@
 492 build_alias = @build_alias@
 493 build_cpu = @build_cpu@
 494 build_os = @build_os@
 495 build_vendor = @build_vendor@
 496 builddir = @builddir@
 497 datadir = @datadir@
 498 datarootdir = @datarootdir@
 499 docdir = @docdir@
 500 dvidir = @dvidir@
 501 exec_prefix = @exec_prefix@
 502 host = @host@
 503 host_alias = @host_alias@
 504 host_cpu = @host_cpu@
 505 host_os = @host_os@
 506 host_vendor = @host_vendor@
 507 htmldir = @htmldir@
 508 includedir = @includedir@
 509 infodir = @infodir@
 510 install_sh = @install_sh@
 511 libdir = @libdir@
 512 libexecdir = @libexecdir@
 513 localedir = @localedir@
 514 localstatedir = @localstatedir@
 515 mandir = @mandir@
 516 mkdir_p = @mkdir_p@
 517 oldincludedir = @oldincludedir@
 518 pdfdir = @pdfdir@
 519 prefix = @prefix@
 520 program_transform_name = @program_transform_name@
 521 psdir = @psdir@
 522 sbindir = @sbindir@
 523 sharedstatedir = @sharedstatedir@
 524 srcdir = @srcdir@
 525 subdirs = @subdirs@
 526 sysconfdir = @sysconfdir@
 527 target_alias = @target_alias@
 528 top_build_prefix = @top_build_prefix@
 529 top_builddir = @top_builddir@
 530 top_srcdir = @top_srcdir@
 531 NULL =
 532 bin_PROGRAMS = $(NTPDC_DB)
 533 libexec_PROGRAMS = $(NTPDC_DL)
 534 sbin_PROGRAMS = $(NTPDC_DS)
 535 EXTRA_DATA = check-layout
 536 BUILT_SOURCES = @MAKE_CHECK_LAYOUT@ ntpdc-opts.c ntpdc-opts.h \
 537         check-libopts check-libntp .deps-ver
 538 AM_CFLAGS = $(CFLAGS_NTP) $(NTP_HARD_CFLAGS)
 539 AM_CPPFLAGS = $(NTP_INCS) $(LIBOPTS_CFLAGS) $(CPPFLAGS_NTP) \
 540         $(NTP_HARD_CPPFLAGS)
 541 AM_LDFLAGS = $(LDFLAGS_NTP) $(NTP_HARD_LDFLAGS)
 542
 543 # LDADD might need RESLIB and ADJLIB
 544 ntpdc_LDADD = version.o $(LIBOPTS_LDADD) ../libntp/libntp.a \
 545         $(LDADD_LIBNTP) $(LIBM) $(PTHREAD_LIBS) $(EDITLINE_LIBS) \
 546         $(LDADD_NTP)
 547 # ntpdc-layout doesn't need any additional libraries at all
 548 ntpdc_layout_LDADD =
 549 DISTCLEANFILES = .version version.c config.log $(man_MANS)
 550 CLEANFILES = check-layout layout.here nl.c ntpdc-layout check-libopts \
 551         check-libntp .deps-ver
 552 noinst_HEADERS = ntpdc.h
 553 ETAGS_ARGS = Makefile.am
 554 EXTRA_DIST = \
 555         invoke-ntpdc.menu       \
 556         invoke-ntpdc.texi       \
 557         layout.std              \
 558         nl_in.c                 \
 559         nl.pl                   \
 560         ntpdc-opts.def          \
 561         ntpdc.1ntpdcman         \
 562         ntpdc.1ntpdcmdoc        \
 563         ntpdc.man.in            \
 564         ntpdc.mdoc.in           \
 565         ntpdc.html              \
 566         ntpdc.texi              \
 567         $(NULL)
 568
 569 man1_MANS =
 570 man8_MANS =
 571 man_MANS = ntpdc.$(NTPDC_MS)
 572 html_DATA = \
 573         $(srcdir)/ntpdc.html            \
 574         $(NULL)
 575
 576 noinst_DATA = \
 577         $(srcdir)/invoke-ntpdc.menu     \
 578         $(srcdir)/invoke-ntpdc.texi     \
 579         $(srcdir)/ntpdc.man.in          \
 580         $(srcdir)/ntpdc.mdoc.in         \
 581         $(NULL)
 582
 583 run_ag = cd $(srcdir) &&        env PATH="$(abs_builddir):$(PATH)" AUTOGEN_DNE_DATE=-D  \
 584                 autogen -L ../sntp/include -L ../sntp/ag-tpl --writable
 585
 586 std_def_list = \
 587         $(top_srcdir)/sntp/include/debug-opt.def                \
 588         $(top_srcdir)/sntp/include/autogen-version.def          \
 589         $(top_srcdir)/sntp/include/copyright.def                \
 590         $(top_srcdir)/sntp/include/homerc.def                   \
 591         $(top_srcdir)/sntp/include/ntp.lic                      \
 592         $(top_srcdir)/sntp/include/version.def                  \
 593         $(NULL)
 594
 595 ntpdc_SOURCES = ntpdc.c ntpdc_ops.c ntpdc-opts.c ntpdc-opts.h
 596 NTP_INCS = -I$(top_srcdir)/include -I$(top_srcdir)/lib/isc/include \
 597         -I$(top_srcdir)/lib/isc/$(LIBISC_PTHREADS_NOTHREADS)/include \
 598         -I$(top_srcdir)/lib/isc/unix/include
 599 all: $(BUILT_SOURCES)
 600         $(MAKE) $(AM_MAKEFLAGS) all-am
 601
 602 .SUFFIXES:
 603 .SUFFIXES: .c .lo .o .obj
 604 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/sntp/check-libntp.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__configure_deps)
 605         @for dep in $?; do \
 606           case '$(am__configure_deps)' in \
 607             *$$dep*) \
 608               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 609                 && { if test -f $@; then exit 0; else break; fi; }; \
 610               exit 1;; \
 611           esac; \
 612         done; \
 613         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ntpdc/Makefile'; \
 614         $(am__cd) $(top_srcdir) && \
 615           $(AUTOMAKE) --foreign ntpdc/Makefile
 616 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 617         @case '$?' in \
 618           *config.status*) \
 619             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 620           *) \
 621             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 622             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 623         esac;
 624 $(top_srcdir)/bincheck.mf $(top_srcdir)/check-libopts.mf $(top_srcdir)/sntp/check-libntp.mf $(top_srcdir)/depsver.mf $(top_srcdir)/includes.mf $(am__empty):
 625
 626 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 627         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 628
 629 $(top_srcdir)/configure:  $(am__configure_deps)
 630         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 631 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 632         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 633 $(am__aclocal_m4_deps):
 634 nl.pl: $(top_builddir)/config.status $(srcdir)/nl.pl.in
 635         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 636 install-binPROGRAMS: $(bin_PROGRAMS)
 637         @$(NORMAL_INSTALL)
 638         @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 639         if test -n "$$list"; then \
 640           echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
 641           $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
 642         fi; \
 643         for p in $$list; do echo "$$p $$p"; done | \
 644         sed 's/$(EXEEXT)$$//' | \
 645         while read p p1; do if test -f $$p \
 646          || test -f $$p1 \
 647           ; then echo "$$p"; echo "$$p"; else :; fi; \
 648         done | \
 649         sed -e 'p;s,.*/,,;n;h' \
 650             -e 's|.*|.|' \
 651             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 652         sed 'N;N;N;s,\n, ,g' | \
 653         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 654           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 655             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 656             else { print "f", $$3 "/" $$4, $$1; } } \
 657           END { for (d in files) print "f", d, files[d] }' | \
 658         while read type dir files; do \
 659             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 660             test -z "$$files" || { \
 661             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 662             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 663             } \
 664         ; done
 665
 666 uninstall-binPROGRAMS:
 667         @$(NORMAL_UNINSTALL)
 668         @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
 669         files=`for p in $$list; do echo "$$p"; done | \
 670           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 671               -e 's/$$/$(EXEEXT)/' \
 672         `; \
 673         test -n "$$list" || exit 0; \
 674         echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
 675         cd "$(DESTDIR)$(bindir)" && rm -f $$files
 676
 677 clean-binPROGRAMS:
 678         @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
 679         echo " rm -f" $$list; \
 680         rm -f $$list || exit $$?; \
 681         test -n "$(EXEEXT)" || exit 0; \
 682         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 683         echo " rm -f" $$list; \
 684         rm -f $$list
 685 install-libexecPROGRAMS: $(libexec_PROGRAMS)
 686         @$(NORMAL_INSTALL)
 687         @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
 688         if test -n "$$list"; then \
 689           echo " $(MKDIR_P) '$(DESTDIR)$(libexecdir)'"; \
 690           $(MKDIR_P) "$(DESTDIR)$(libexecdir)" || exit 1; \
 691         fi; \
 692         for p in $$list; do echo "$$p $$p"; done | \
 693         sed 's/$(EXEEXT)$$//' | \
 694         while read p p1; do if test -f $$p \
 695          || test -f $$p1 \
 696           ; then echo "$$p"; echo "$$p"; else :; fi; \
 697         done | \
 698         sed -e 'p;s,.*/,,;n;h' \
 699             -e 's|.*|.|' \
 700             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 701         sed 'N;N;N;s,\n, ,g' | \
 702         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 703           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 704             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 705             else { print "f", $$3 "/" $$4, $$1; } } \
 706           END { for (d in files) print "f", d, files[d] }' | \
 707         while read type dir files; do \
 708             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 709             test -z "$$files" || { \
 710             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(libexecdir)$$dir'"; \
 711             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(libexecdir)$$dir" || exit $$?; \
 712             } \
 713         ; done
 714
 715 uninstall-libexecPROGRAMS:
 716         @$(NORMAL_UNINSTALL)
 717         @list='$(libexec_PROGRAMS)'; test -n "$(libexecdir)" || list=; \
 718         files=`for p in $$list; do echo "$$p"; done | \
 719           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 720               -e 's/$$/$(EXEEXT)/' \
 721         `; \
 722         test -n "$$list" || exit 0; \
 723         echo " ( cd '$(DESTDIR)$(libexecdir)' && rm -f" $$files ")"; \
 724         cd "$(DESTDIR)$(libexecdir)" && rm -f $$files
 725
 726 clean-libexecPROGRAMS:
 727         @list='$(libexec_PROGRAMS)'; test -n "$$list" || exit 0; \
 728         echo " rm -f" $$list; \
 729         rm -f $$list || exit $$?; \
 730         test -n "$(EXEEXT)" || exit 0; \
 731         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 732         echo " rm -f" $$list; \
 733         rm -f $$list
 734 install-sbinPROGRAMS: $(sbin_PROGRAMS)
 735         @$(NORMAL_INSTALL)
 736         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 737         if test -n "$$list"; then \
 738           echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
 739           $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
 740         fi; \
 741         for p in $$list; do echo "$$p $$p"; done | \
 742         sed 's/$(EXEEXT)$$//' | \
 743         while read p p1; do if test -f $$p \
 744          || test -f $$p1 \
 745           ; then echo "$$p"; echo "$$p"; else :; fi; \
 746         done | \
 747         sed -e 'p;s,.*/,,;n;h' \
 748             -e 's|.*|.|' \
 749             -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
 750         sed 'N;N;N;s,\n, ,g' | \
 751         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
 752           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 753             if ($$2 == $$4) files[d] = files[d] " " $$1; \
 754             else { print "f", $$3 "/" $$4, $$1; } } \
 755           END { for (d in files) print "f", d, files[d] }' | \
 756         while read type dir files; do \
 757             if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 758             test -z "$$files" || { \
 759             echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
 760             $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
 761             } \
 762         ; done
 763
 764 uninstall-sbinPROGRAMS:
 765         @$(NORMAL_UNINSTALL)
 766         @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
 767         files=`for p in $$list; do echo "$$p"; done | \
 768           sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
 769               -e 's/$$/$(EXEEXT)/' \
 770         `; \
 771         test -n "$$list" || exit 0; \
 772         echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
 773         cd "$(DESTDIR)$(sbindir)" && rm -f $$files
 774
 775 clean-sbinPROGRAMS:
 776         @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
 777         echo " rm -f" $$list; \
 778         rm -f $$list || exit $$?; \
 779         test -n "$(EXEEXT)" || exit 0; \
 780         list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 781         echo " rm -f" $$list; \
 782         rm -f $$list
 783
 784 ntpdc$(EXEEXT): $(ntpdc_OBJECTS) $(ntpdc_DEPENDENCIES) $(EXTRA_ntpdc_DEPENDENCIES)
 785         @rm -f ntpdc$(EXEEXT)
 786         $(AM_V_CCLD)$(LINK) $(ntpdc_OBJECTS) $(ntpdc_LDADD) $(LIBS)
 787
 788 ntpdc-layout$(EXEEXT): $(ntpdc_layout_OBJECTS) $(ntpdc_layout_DEPENDENCIES) $(EXTRA_ntpdc_layout_DEPENDENCIES)
 789         @rm -f ntpdc-layout$(EXEEXT)
 790         $(AM_V_CCLD)$(LINK) $(ntpdc_layout_OBJECTS) $(ntpdc_layout_LDADD) $(LIBS)
 791
 792 mostlyclean-compile:
 793         -rm -f *.$(OBJEXT)
 794
 795 distclean-compile:
 796         -rm -f *.tab.c
 797
 798 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc-layout.Po@am__quote@
 799 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc-opts.Po@am__quote@
 800 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc.Po@am__quote@
 801 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ntpdc_ops.Po@am__quote@
 802
 803 .c.o:
 804 @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 805 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 806 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 807 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 808 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 809
 810 .c.obj:
 811 @am__fastdepCC_TRUE@    $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 812 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 813 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 814 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 815 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 816
 817 .c.lo:
 818 @am__fastdepCC_TRUE@    $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 819 @am__fastdepCC_TRUE@    $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 820 @AMDEP_TRUE@@am__fastdepCC_FALSE@       $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 821 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 822 @am__fastdepCC_FALSE@   $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
 823
 824 mostlyclean-libtool:
 825         -rm -f *.lo
 826
 827 clean-libtool:
 828         -rm -rf .libs _libs
 829 install-man1: $(man1_MANS) $(man_MANS)
 830         @$(NORMAL_INSTALL)
 831         @list1='$(man1_MANS)'; \
 832         list2='$(man_MANS)'; \
 833         test -n "$(man1dir)" \
 834           && test -n "`echo $$list1$$list2`" \
 835           || exit 0; \
 836         echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
 837         $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
 838         { for i in $$list1; do echo "$$i"; done;  \
 839         if test -n "$$list2"; then \
 840           for i in $$list2; do echo "$$i"; done \
 841             | sed -n '/\.1[a-z]*$$/p'; \
 842         fi; \
 843         } | while read p; do \
 844           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 845           echo "$$d$$p"; echo "$$p"; \
 846         done | \
 847         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 848               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 849         sed 'N;N;s,\n, ,g' | { \
 850         list=; while read file base inst; do \
 851           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 852             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
 853             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
 854           fi; \
 855         done; \
 856         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 857         while read files; do \
 858           test -z "$$files" || { \
 859             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
 860             $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
 861         done; }
 862
 863 uninstall-man1:
 864         @$(NORMAL_UNINSTALL)
 865         @list='$(man1_MANS)'; test -n "$(man1dir)" || exit 0; \
 866         files=`{ for i in $$list; do echo "$$i"; done; \
 867         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 868           sed -n '/\.1[a-z]*$$/p'; \
 869         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 870               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 871         dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 872 install-man8: $(man8_MANS) $(man_MANS)
 873         @$(NORMAL_INSTALL)
 874         @list1='$(man8_MANS)'; \
 875         list2='$(man_MANS)'; \
 876         test -n "$(man8dir)" \
 877           && test -n "`echo $$list1$$list2`" \
 878           || exit 0; \
 879         echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
 880         $(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
 881         { for i in $$list1; do echo "$$i"; done;  \
 882         if test -n "$$list2"; then \
 883           for i in $$list2; do echo "$$i"; done \
 884             | sed -n '/\.8[a-z]*$$/p'; \
 885         fi; \
 886         } | while read p; do \
 887           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 888           echo "$$d$$p"; echo "$$p"; \
 889         done | \
 890         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 891               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 892         sed 'N;N;s,\n, ,g' | { \
 893         list=; while read file base inst; do \
 894           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 895             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
 896             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
 897           fi; \
 898         done; \
 899         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 900         while read files; do \
 901           test -z "$$files" || { \
 902             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
 903             $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
 904         done; }
 905
 906 uninstall-man8:
 907         @$(NORMAL_UNINSTALL)
 908         @list='$(man8_MANS)'; test -n "$(man8dir)" || exit 0; \
 909         files=`{ for i in $$list; do echo "$$i"; done; \
 910         l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
 911           sed -n '/\.8[a-z]*$$/p'; \
 912         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
 913               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 914         dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
 915 install-htmlDATA: $(html_DATA)
 916         @$(NORMAL_INSTALL)
 917         @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
 918         if test -n "$$list"; then \
 919           echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
 920           $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
 921         fi; \
 922         for p in $$list; do \
 923           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 924           echo "$$d$$p"; \
 925         done | $(am__base_list) | \
 926         while read files; do \
 927           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 928           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 929         done
 930
 931 uninstall-htmlDATA:
 932         @$(NORMAL_UNINSTALL)
 933         @list='$(html_DATA)'; test -n "$(htmldir)" || list=; \
 934         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 935         dir='$(DESTDIR)$(htmldir)'; $(am__uninstall_files_from_dir)
 936
 937 ID: $(am__tagged_files)
 938         $(am__define_uniq_tagged_files); mkid -fID $$unique
 939 tags: tags-am
 940 TAGS: tags
 941
 942 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 943         set x; \
 944         here=`pwd`; \
 945         $(am__define_uniq_tagged_files); \
 946         shift; \
 947         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 948           test -n "$$unique" || unique=$$empty_fix; \
 949           if test $$# -gt 0; then \
 950             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 951               "$$@" $$unique; \
 952           else \
 953             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 954               $$unique; \
 955           fi; \
 956         fi
 957 ctags: ctags-am
 958
 959 CTAGS: ctags
 960 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 961         $(am__define_uniq_tagged_files); \
 962         test -z "$(CTAGS_ARGS)$$unique" \
 963           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 964              $$unique
 965
 966 GTAGS:
 967         here=`$(am__cd) $(top_builddir) && pwd` \
 968           && $(am__cd) $(top_srcdir) \
 969           && gtags -i $(GTAGS_ARGS) "$$here"
 970 cscopelist: cscopelist-am
 971
 972 cscopelist-am: $(am__tagged_files)
 973         list='$(am__tagged_files)'; \
 974         case "$(srcdir)" in \
 975           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 976           *) sdir=$(subdir)/$(srcdir) ;; \
 977         esac; \
 978         for i in $$list; do \
 979           if test -f "$$i"; then \
 980             echo "$(subdir)/$$i"; \
 981           else \
 982             echo "$$sdir/$$i"; \
 983           fi; \
 984         done >> $(top_builddir)/cscope.files
 985
 986 distclean-tags:
 987         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 988
 989 distdir: $(DISTFILES)
 990         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 991         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 992         list='$(DISTFILES)'; \
 993           dist_files=`for file in $$list; do echo $$file; done | \
 994           sed -e "s|^$$srcdirstrip/||;t" \
 995               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 996         case $$dist_files in \
 997           */*) $(MKDIR_P) `echo "$$dist_files" | \
 998                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 999                            sort -u` ;; \
1000         esac; \
1001         for file in $$dist_files; do \
1002           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
1003           if test -d $$d/$$file; then \
1004             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
1005             if test -d "$(distdir)/$$file"; then \
1006               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1007             fi; \
1008             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
1009               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
1010               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
1011             fi; \
1012             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
1013           else \
1014             test -f "$(distdir)/$$file" \
1015             || cp -p $$d/$$file "$(distdir)/$$file" \
1016             || exit 1; \
1017           fi; \
1018         done
1019 check-am: all-am
1020 check: $(BUILT_SOURCES)
1021         $(MAKE) $(AM_MAKEFLAGS) check-am
1022 all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
1023 installdirs:
1024         for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libexecdir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(htmldir)"; do \
1025           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
1026         done
1027 install: $(BUILT_SOURCES)
1028         $(MAKE) $(AM_MAKEFLAGS) install-am
1029 install-exec: install-exec-am
1030 install-data: install-data-am
1031 uninstall: uninstall-am
1032
1033 install-am: all-am
1034         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
1035
1036 installcheck: installcheck-am
1037 install-strip:
1038         if test -z '$(STRIP)'; then \
1039           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1040             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1041               install; \
1042         else \
1043           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
1044             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
1045             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
1046         fi
1047 mostlyclean-generic:
1048
1049 clean-generic:
1050         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
1051
1052 distclean-generic:
1053         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
1054         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
1055         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
1056
1057 maintainer-clean-generic:
1058         @echo "This command is intended for maintainers to use"
1059         @echo "it deletes files that may require special tools to rebuild."
1060         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
1061 clean: clean-am
1062
1063 clean-am: clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
1064         clean-libtool clean-sbinPROGRAMS mostlyclean-am
1065
1066 distclean: distclean-am
1067         -rm -rf ./$(DEPDIR)
1068         -rm -f Makefile
1069 distclean-am: clean-am distclean-compile distclean-generic \
1070         distclean-tags
1071
1072 dvi: dvi-am
1073
1074 dvi-am:
1075
1076 html: html-am
1077
1078 html-am:
1079
1080 info: info-am
1081
1082 info-am:
1083
1084 install-data-am: install-data-local install-htmlDATA install-man
1085
1086 install-dvi: install-dvi-am
1087
1088 install-dvi-am:
1089
1090 install-exec-am: install-binPROGRAMS install-libexecPROGRAMS \
1091         install-sbinPROGRAMS
1092         @$(NORMAL_INSTALL)
1093         $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
1094 install-html: install-html-am
1095
1096 install-html-am:
1097
1098 install-info: install-info-am
1099
1100 install-info-am:
1101
1102 install-man: install-man1 install-man8
1103
1104 install-pdf: install-pdf-am
1105
1106 install-pdf-am:
1107
1108 install-ps: install-ps-am
1109
1110 install-ps-am:
1111
1112 installcheck-am:
1113
1114 maintainer-clean: maintainer-clean-am
1115         -rm -rf ./$(DEPDIR)
1116         -rm -f Makefile
1117 maintainer-clean-am: distclean-am maintainer-clean-generic
1118
1119 mostlyclean: mostlyclean-am
1120
1121 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
1122         mostlyclean-libtool
1123
1124 pdf: pdf-am
1125
1126 pdf-am:
1127
1128 ps: ps-am
1129
1130 ps-am:
1131
1132 uninstall-am: uninstall-binPROGRAMS uninstall-htmlDATA \
1133         uninstall-libexecPROGRAMS uninstall-man uninstall-sbinPROGRAMS
1134
1135 uninstall-man: uninstall-man1 uninstall-man8
1136
1137 .MAKE: all check install install-am install-exec-am install-strip
1138
1139 .PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
1140         clean-binPROGRAMS clean-generic clean-libexecPROGRAMS \
1141         clean-libtool clean-sbinPROGRAMS cscopelist-am ctags ctags-am \
1142         distclean distclean-compile distclean-generic \
1143         distclean-libtool distclean-tags distdir dvi dvi-am html \
1144         html-am info info-am install install-am install-binPROGRAMS \
1145         install-data install-data-am install-data-local install-dvi \
1146         install-dvi-am install-exec install-exec-am install-exec-hook \
1147         install-html install-html-am install-htmlDATA install-info \
1148         install-info-am install-libexecPROGRAMS install-man \
1149         install-man1 install-man8 install-pdf install-pdf-am \
1150         install-ps install-ps-am install-sbinPROGRAMS install-strip \
1151         installcheck installcheck-am installdirs maintainer-clean \
1152         maintainer-clean-generic mostlyclean mostlyclean-compile \
1153         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
1154         tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
1155         uninstall-htmlDATA uninstall-libexecPROGRAMS uninstall-man \
1156         uninstall-man1 uninstall-man8 uninstall-sbinPROGRAMS
1157
1158 .PRECIOUS: Makefile
1159
1160
1161 install-data-local: install-html
1162
1163 $(srcdir)/ntpdc-opts.h: $(srcdir)/ntpdc-opts.c
1164         @: do-nothing action to avoid default SCCS get, .h built with .c
1165
1166 $(srcdir)/ntpdc-opts.c: $(srcdir)/ntpdc-opts.def $(std_def_list)
1167         $(run_ag) ntpdc-opts.def
1168
1169 ###
1170
1171 $(srcdir)/ntpdc.1ntpdcman: $(srcdir)/ntpdc-opts.def $(std_def_list)
1172         $(run_ag) -DMAN_SECTION=1ntpdcman -Tagman-cmd.tpl ntpdc-opts.def
1173
1174 $(srcdir)/ntpdc.man.in: $(srcdir)/ntpdc.1ntpdcman $(top_srcdir)/sntp/scripts/mansec2subst.sed
1175         sed -f $(top_srcdir)/sntp/scripts/mansec2subst.sed $(srcdir)/ntpdc.1ntpdcman > $(srcdir)/ntpdc.man.in+
1176         mv $(srcdir)/ntpdc.man.in+ $(srcdir)/ntpdc.man.in
1177
1178 ###
1179
1180 $(srcdir)/ntpdc.1ntpdcmdoc: $(srcdir)/ntpdc-opts.def $(std_def_list)
1181         $(run_ag) -DMAN_SECTION=1ntpdcmdoc -Tagmdoc-cmd.tpl ntpdc-opts.def
1182
1183 $(srcdir)/ntpdc.mdoc.in: $(srcdir)/ntpdc.1ntpdcmdoc $(top_srcdir)/sntp/scripts/mansec2subst.sed
1184         sed -f $(top_srcdir)/sntp/scripts/mansec2subst.sed $(srcdir)/ntpdc.1ntpdcmdoc > $(srcdir)/ntpdc.mdoc.in+
1185         mv $(srcdir)/ntpdc.mdoc.in+ $(srcdir)/ntpdc.mdoc.in
1186
1187 ###
1188
1189 ntpdc.$(NTPDC_MS): $(srcdir)/ntpdc.$(MANTAGFMT).in $(top_builddir)/config.status
1190         $(top_builddir)/config.status --file=ntpdc.$(NTPDC_MS)+:$(srcdir)/ntpdc.$(MANTAGFMT).in
1191         mv ntpdc.$(NTPDC_MS)+ ntpdc.$(NTPDC_MS)
1192
1193 ###
1194
1195 $(srcdir)/invoke-ntpdc.menu: $(srcdir)/invoke-ntpdc.texi
1196         @: do-nothing action to avoid default SCCS get, .menu built with .texi
1197
1198 $(srcdir)/invoke-ntpdc.texi: $(srcdir)/ntpdc-opts.def $(std_def_list)
1199         $(run_ag) -Tagtexi-cmd.tpl -DLEVEL=section ntpdc-opts.def
1200         $(top_srcdir)/scripts/build/check--help $@
1201
1202 $(srcdir)/ntpdc.html: $(srcdir)/invoke-ntpdc.menu $(srcdir)/invoke-ntpdc.texi $(srcdir)/ntpdc.texi $(top_srcdir)/sntp/include/version.texi
1203         cd $(srcdir) && ( makeinfo --force --html --no-split -I ../sntp -o ntpdc.html ntpdc.texi || true )
1204
1205 ntpdc-layout.o: nl.c
1206
1207 layout.here: ntpdc-layout
1208         ./ntpdc-layout > $@
1209
1210 check-layout: ntpdc-layout $(srcdir)/layout.std layout.here
1211         cmp $(srcdir)/layout.std layout.here && echo stamp > $@
1212
1213 $(PROGRAMS): version.o
1214
1215 $(top_srcdir)/sntp/scm-rev:
1216         cd ../sntp && $(MAKE) $(AM_MAKEFLAGS) check-scm-rev
1217
1218 version.c: $(ntpdc_OBJECTS) ../libntp/libntp.a Makefile $(top_srcdir)/sntp/scm-rev
1219         env CSET=`cat $(top_srcdir)/sntp/scm-rev` $(top_builddir)/scripts/build/mkver ntpdc
1220
1221 version.o: version.c
1222         env CCACHE_DISABLE=1 $(COMPILE) -c version.c -o version.o
1223
1224 # I ran nl_in.c (attached, to be installed into ntpdc) through
1225 # $(CC) -E nl_in.c | nl.pl > nl.c
1226 nl.c: nl_in.c nl.pl Makefile.am ../config.h ../include/ntp_request.h ntpdc.h
1227         $(CC) -E $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(srcdir)/nl_in.c | ./nl.pl > nl.c
1228
1229 install-exec-hook:
1230         @test -z "${bin_PROGRAMS}${bin_SCRIPTS}"                \
1231         || for i in ${bin_PROGRAMS} ${bin_SCRIPTS} " "; do      \
1232            test ! -f ${sbindir}/$$i                             \
1233                 || echo "*** $$i is also in ${sbindir}!";       \
1234         done
1235         @test -z "${sbin_PROGRAMS}${asbin_SCRIPTS}"             \
1236         || for i in ${sbin_PROGRAMS} ${sbin_SCRIPTS} " "; do    \
1237            test ! -f ${bindir}/$$i                              \
1238                 || echo "*** $$i is also in ${bindir}!";        \
1239         done
1240
1241 #
1242
1243 check-libopts: ../sntp/libopts/libopts.la
1244         @echo stamp > $@
1245
1246 ../sntp/libopts/libopts.la:
1247         -cd ../sntp/libopts && $(MAKE) $(AM_MAKEFLAGS) libopts.la
1248
1249 check-libntp: ../libntp/libntp.a
1250
1251 ../libntp/libntp.a:
1252         cd ../libntp && $(MAKE) $(AM_MAKEFLAGS) libntp.a
1253 $(DEPDIR)/deps-ver: $(top_srcdir)/deps-ver
1254         @[ -f $@ ] ||                                                   \
1255                 cp $(top_srcdir)/deps-ver $@
1256         @[ -w $@ ] ||                                                   \
1257                 chmod ug+w $@
1258         @cmp $(top_srcdir)/deps-ver $@ > /dev/null || (                 \
1259                 $(MAKE) $(AM_MAKEFLAGS) clean &&                                        \
1260                 echo -n "Prior $(subdir)/$(DEPDIR) version " &&         \
1261                 cat $@ &&                                               \
1262                 rm -rf $(DEPDIR) &&                                     \
1263                 mkdir $(DEPDIR) &&                                      \
1264                 case "$(top_builddir)" in                               \
1265                  .)                                                     \
1266                     ./config.status Makefile depfiles                   \
1267                     ;;                                                  \
1268                  *)                                                     \
1269                     cd "$(top_builddir)" &&                             \
1270                     ./config.status $(subdir)/Makefile depfiles &&      \
1271                     cd $(subdir)                                        \
1272                     ;;                                                  \
1273                 esac &&                                                 \
1274                 echo -n "Cleaned $(subdir)/$(DEPDIR) version " &&       \
1275                 cat $(top_srcdir)/deps-ver                              \
1276         )
1277         cp $(top_srcdir)/deps-ver $@
1278
1279 .deps-ver: $(top_srcdir)/deps-ver
1280         @[ ! -d $(DEPDIR) ] || $(MAKE) $(AM_MAKEFLAGS) $(DEPDIR)/deps-ver
1281         @touch $@
1282
1283 #
1284 # depsver.mf    included in Makefile.am for directories with .deps
1285 #
1286 # When building in the same directory with sources that change over
1287 # time, such as when tracking using bk, the .deps files can become
1288 # stale with respect to moved, deleted, or superceded headers.  Most
1289 # commonly, this would exhibit as make reporting a failure to make a
1290 # header file which is no longer in the location given.  To address
1291 # this issue, we use a deps-ver file which is updated with each change
1292 # that breaks old .deps files.  A copy of deps-ver is made into
1293 # $(DEPDIR) if not already present.  If $(DEPDIR)/deps-ver is present
1294 # with different contents than deps-ver, we make clean to ensure all
1295 # .o files built before the incompatible change are rebuilt along with
1296 # their updated .deps files, then remove $(DEPDIR) and recreate it as
1297 # empty stubs.
1298 #
1299 # It is normal when configured with --disable-dependency-tracking for
1300 # the DEPDIR to not have been created.  For this reason, we use the
1301 # intermediate target .deps-ver, which invokes make recursively if
1302 # DEPDIR exists.
1303 #
1304 # If you modify depsver.mf, please make the changes to the master
1305 # copy, the one in sntp is copied by the bootstrap script from it.
1306 #
1307 # This comment block follows rather than leads the related code so that
1308 # it stays with it in the generated Makefile.in and Makefile.
1309 #
1310
1311 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1312 # Otherwise a system limit (for SysV at least) may be exceeded.
1313 .NOEXPORT: