]> CyberLeo.Net >> Repos - FreeBSD/releng/10.3.git/blob - sys/cam/cam_periph.h
- Copy stable/10@296371 to releng/10.3 in preparation for 10.3-RC1
[FreeBSD/releng/10.3.git] / sys / cam / cam_periph.h
1 /*-
2  * Data structures and definitions for CAM peripheral ("type") drivers.
3  *
4  * Copyright (c) 1997, 1998 Justin T. Gibbs.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
20  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  *
28  * $FreeBSD$
29  */
30
31 #ifndef _CAM_CAM_PERIPH_H
32 #define _CAM_CAM_PERIPH_H 1
33
34 #include <sys/queue.h>
35 #include <cam/cam_sim.h>
36
37 #ifdef _KERNEL
38 #include <sys/taskqueue.h>
39
40 #include <cam/cam_xpt.h>
41
42 struct devstat;
43
44 extern struct cam_periph *xpt_periph;
45
46 extern struct periph_driver **periph_drivers;
47 void periphdriver_register(void *);
48 void periphdriver_init(int level);
49
50 #include <sys/module.h>
51 #define PERIPHDRIVER_DECLARE(name, driver) \
52         static int name ## _modevent(module_t mod, int type, void *data) \
53         { \
54                 switch (type) { \
55                 case MOD_LOAD: \
56                         periphdriver_register(data); \
57                         break; \
58                 case MOD_UNLOAD: \
59                         printf(#name " module unload - not possible for this module type\n"); \
60                         return EINVAL; \
61                 default: \
62                         return EOPNOTSUPP; \
63                 } \
64                 return 0; \
65         } \
66         static moduledata_t name ## _mod = { \
67                 #name, \
68                 name ## _modevent, \
69                 (void *)&driver \
70         }; \
71         DECLARE_MODULE(name, name ## _mod, SI_SUB_DRIVERS, SI_ORDER_ANY); \
72         MODULE_DEPEND(name, cam, 1, 1, 1)
73
74 typedef void (periph_init_t)(void); /*
75                                      * Callback informing the peripheral driver
76                                      * it can perform it's initialization since
77                                      * the XPT is now fully initialized.
78                                      */
79 typedef periph_init_t *periph_init_func_t;
80
81 struct periph_driver {
82         periph_init_func_t       init;
83         char                     *driver_name;
84         TAILQ_HEAD(,cam_periph)  units;
85         u_int                    generation;
86         u_int                    flags;
87 #define CAM_PERIPH_DRV_EARLY            0x01
88 };
89
90 typedef enum {
91         CAM_PERIPH_BIO
92 } cam_periph_type;
93
94 /* Generically useful offsets into the peripheral private area */
95 #define ppriv_ptr0 periph_priv.entries[0].ptr
96 #define ppriv_ptr1 periph_priv.entries[1].ptr
97 #define ppriv_field0 periph_priv.entries[0].field
98 #define ppriv_field1 periph_priv.entries[1].field
99
100 typedef void            periph_start_t (struct cam_periph *periph,
101                                         union ccb *start_ccb);
102 typedef cam_status      periph_ctor_t (struct cam_periph *periph,
103                                        void *arg);
104 typedef void            periph_oninv_t (struct cam_periph *periph);
105 typedef void            periph_dtor_t (struct cam_periph *periph);
106 struct cam_periph {
107         periph_start_t          *periph_start;
108         periph_oninv_t          *periph_oninval;
109         periph_dtor_t           *periph_dtor;
110         char                    *periph_name;
111         struct cam_path         *path;  /* Compiled path to device */
112         void                    *softc;
113         struct cam_sim          *sim;
114         u_int32_t                unit_number;
115         cam_periph_type          type;
116         u_int32_t                flags;
117 #define CAM_PERIPH_RUNNING              0x01
118 #define CAM_PERIPH_LOCKED               0x02
119 #define CAM_PERIPH_LOCK_WANTED          0x04
120 #define CAM_PERIPH_INVALID              0x08
121 #define CAM_PERIPH_NEW_DEV_FOUND        0x10
122 #define CAM_PERIPH_RECOVERY_INPROG      0x20
123 #define CAM_PERIPH_RUN_TASK             0x40
124 #define CAM_PERIPH_FREE                 0x80
125 #define CAM_PERIPH_ANNOUNCED            0x100
126         uint32_t                 scheduled_priority;
127         uint32_t                 immediate_priority;
128         int                      periph_allocating;
129         int                      periph_allocated;
130         u_int32_t                refcount;
131         SLIST_HEAD(, ccb_hdr)    ccb_list;      /* For "immediate" requests */
132         SLIST_ENTRY(cam_periph)  periph_links;
133         TAILQ_ENTRY(cam_periph)  unit_links;
134         ac_callback_t           *deferred_callback; 
135         ac_code                  deferred_ac;
136         struct task              periph_run_task;
137 };
138
139 #define CAM_PERIPH_MAXMAPS      2
140
141 struct cam_periph_map_info {
142         int             num_bufs_used;
143         struct buf      *bp[CAM_PERIPH_MAXMAPS];
144 };
145
146 cam_status cam_periph_alloc(periph_ctor_t *periph_ctor,
147                             periph_oninv_t *periph_oninvalidate,
148                             periph_dtor_t *periph_dtor,
149                             periph_start_t *periph_start,
150                             char *name, cam_periph_type type, struct cam_path *,
151                             ac_callback_t *, ac_code, void *arg);
152 struct cam_periph *cam_periph_find(struct cam_path *path, char *name);
153 int             cam_periph_list(struct cam_path *, struct sbuf *);
154 cam_status      cam_periph_acquire(struct cam_periph *periph);
155 void            cam_periph_doacquire(struct cam_periph *periph);
156 void            cam_periph_release(struct cam_periph *periph);
157 void            cam_periph_release_locked(struct cam_periph *periph);
158 void            cam_periph_release_locked_buses(struct cam_periph *periph);
159 int             cam_periph_hold(struct cam_periph *periph, int priority);
160 void            cam_periph_unhold(struct cam_periph *periph);
161 void            cam_periph_invalidate(struct cam_periph *periph);
162 int             cam_periph_mapmem(union ccb *ccb,
163                                   struct cam_periph_map_info *mapinfo,
164                                   u_int maxmap);
165 void            cam_periph_unmapmem(union ccb *ccb,
166                                     struct cam_periph_map_info *mapinfo);
167 union ccb       *cam_periph_getccb(struct cam_periph *periph,
168                                    u_int32_t priority);
169 void            cam_periph_ccbwait(union ccb *ccb);
170 int             cam_periph_runccb(union ccb *ccb,
171                                   int (*error_routine)(union ccb *ccb,
172                                                        cam_flags camflags,
173                                                        u_int32_t sense_flags),
174                                   cam_flags camflags, u_int32_t sense_flags,
175                                   struct devstat *ds);
176 int             cam_periph_ioctl(struct cam_periph *periph, u_long cmd, 
177                                  caddr_t addr,
178                                  int (*error_routine)(union ccb *ccb,
179                                                       cam_flags camflags,
180                                                       u_int32_t sense_flags));
181 void            cam_freeze_devq(struct cam_path *path);
182 u_int32_t       cam_release_devq(struct cam_path *path, u_int32_t relsim_flags,
183                                  u_int32_t opening_reduction, u_int32_t arg,
184                                  int getcount_only);
185 void            cam_periph_async(struct cam_periph *periph, u_int32_t code,
186                                  struct cam_path *path, void *arg);
187 void            cam_periph_bus_settle(struct cam_periph *periph,
188                                       u_int bus_settle_ms);
189 void            cam_periph_freeze_after_event(struct cam_periph *periph,
190                                               struct timeval* event_time,
191                                               u_int duration_ms);
192 int             cam_periph_error(union ccb *ccb, cam_flags camflags,
193                                  u_int32_t sense_flags, union ccb *save_ccb);
194
195 static __inline struct mtx *
196 cam_periph_mtx(struct cam_periph *periph)
197 {
198         return (xpt_path_mtx(periph->path));
199 }
200
201 #define cam_periph_owned(periph)                                        \
202         mtx_owned(xpt_path_mtx((periph)->path))
203
204 #define cam_periph_lock(periph)                                         \
205         mtx_lock(xpt_path_mtx((periph)->path))
206
207 #define cam_periph_unlock(periph)                                       \
208         mtx_unlock(xpt_path_mtx((periph)->path))
209
210 #define cam_periph_assert(periph, what)                                 \
211         mtx_assert(xpt_path_mtx((periph)->path), (what))
212
213 #define cam_periph_sleep(periph, chan, priority, wmesg, timo)           \
214         xpt_path_sleep((periph)->path, (chan), (priority), (wmesg), (timo))
215
216 static inline struct cam_periph *
217 cam_periph_acquire_first(struct periph_driver *driver)
218 {
219         struct cam_periph *periph;
220
221         xpt_lock_buses();
222         periph = TAILQ_FIRST(&driver->units);
223         while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0)
224                 periph = TAILQ_NEXT(periph, unit_links);
225         if (periph != NULL)
226                 periph->refcount++;
227         xpt_unlock_buses();
228         return (periph);
229 }
230
231 static inline struct cam_periph *
232 cam_periph_acquire_next(struct cam_periph *pperiph)
233 {
234         struct cam_periph *periph = pperiph;
235
236         cam_periph_assert(pperiph, MA_NOTOWNED);
237         xpt_lock_buses();
238         do {
239                 periph = TAILQ_NEXT(periph, unit_links);
240         } while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0);
241         if (periph != NULL)
242                 periph->refcount++;
243         xpt_unlock_buses();
244         cam_periph_release(pperiph);
245         return (periph);
246 }
247
248 #define CAM_PERIPH_FOREACH(periph, driver)                              \
249         for ((periph) = cam_periph_acquire_first(driver);               \
250             (periph) != NULL;                                           \
251             (periph) = cam_periph_acquire_next(periph))
252
253 #endif /* _KERNEL */
254 #endif /* _CAM_CAM_PERIPH_H */