sys/cddl/contrib/opensolaris/uts/common/fs/zfs/bpobj.c

   1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9  * or http://www.opensolaris.org/os/licensing.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21 /*
  22  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
  23  * Copyright (c) 2011, 2014 by Delphix. All rights reserved.
  24  */
  25
  26 #include <sys/bpobj.h>
  27 #include <sys/zfs_context.h>
  28 #include <sys/refcount.h>
  29 #include <sys/dsl_pool.h>
  30 #include <sys/zfeature.h>
  31 #include <sys/zap.h>
  32
  33 /*
  34  * Return an empty bpobj, preferably the empty dummy one (dp_empty_bpobj).
  35  */
  36 uint64_t
  37 bpobj_alloc_empty(objset_t *os, int blocksize, dmu_tx_t *tx)
  38 {
  39         spa_t *spa = dmu_objset_spa(os);
  40         dsl_pool_t *dp = dmu_objset_pool(os);
  41
  42         if (spa_feature_is_enabled(spa, SPA_FEATURE_EMPTY_BPOBJ)) {
  43                 if (!spa_feature_is_active(spa, SPA_FEATURE_EMPTY_BPOBJ)) {
  44                         ASSERT0(dp->dp_empty_bpobj);
  45                         dp->dp_empty_bpobj =
  46                             bpobj_alloc(os, SPA_OLD_MAXBLOCKSIZE, tx);
  47                         VERIFY(zap_add(os,
  48                             DMU_POOL_DIRECTORY_OBJECT,
  49                             DMU_POOL_EMPTY_BPOBJ, sizeof (uint64_t), 1,
  50                             &dp->dp_empty_bpobj, tx) == 0);
  51                 }
  52                 spa_feature_incr(spa, SPA_FEATURE_EMPTY_BPOBJ, tx);
  53                 ASSERT(dp->dp_empty_bpobj != 0);
  54                 return (dp->dp_empty_bpobj);
  55         } else {
  56                 return (bpobj_alloc(os, blocksize, tx));
  57         }
  58 }
  59
  60 void
  61 bpobj_decr_empty(objset_t *os, dmu_tx_t *tx)
  62 {
  63         dsl_pool_t *dp = dmu_objset_pool(os);
  64
  65         spa_feature_decr(dmu_objset_spa(os), SPA_FEATURE_EMPTY_BPOBJ, tx);
  66         if (!spa_feature_is_active(dmu_objset_spa(os),
  67             SPA_FEATURE_EMPTY_BPOBJ)) {
  68                 VERIFY3U(0, ==, zap_remove(dp->dp_meta_objset,
  69                     DMU_POOL_DIRECTORY_OBJECT,
  70                     DMU_POOL_EMPTY_BPOBJ, tx));
  71                 VERIFY3U(0, ==, dmu_object_free(os, dp->dp_empty_bpobj, tx));
  72                 dp->dp_empty_bpobj = 0;
  73         }
  74 }
  75
  76 uint64_t
  77 bpobj_alloc(objset_t *os, int blocksize, dmu_tx_t *tx)
  78 {
  79         int size;
  80
  81         if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_BPOBJ_ACCOUNT)
  82                 size = BPOBJ_SIZE_V0;
  83         else if (spa_version(dmu_objset_spa(os)) < SPA_VERSION_DEADLISTS)
  84                 size = BPOBJ_SIZE_V1;
  85         else
  86                 size = sizeof (bpobj_phys_t);
  87
  88         return (dmu_object_alloc(os, DMU_OT_BPOBJ, blocksize,
  89             DMU_OT_BPOBJ_HDR, size, tx));
  90 }
  91
  92 void
  93 bpobj_free(objset_t *os, uint64_t obj, dmu_tx_t *tx)
  94 {
  95         int64_t i;
  96         bpobj_t bpo;
  97         dmu_object_info_t doi;
  98         int epb;
  99         dmu_buf_t *dbuf = NULL;
 100
 101         ASSERT(obj != dmu_objset_pool(os)->dp_empty_bpobj);
 102         VERIFY3U(0, ==, bpobj_open(&bpo, os, obj));
 103
 104         mutex_enter(&bpo.bpo_lock);
 105
 106         if (!bpo.bpo_havesubobj || bpo.bpo_phys->bpo_subobjs == 0)
 107                 goto out;
 108
 109         VERIFY3U(0, ==, dmu_object_info(os, bpo.bpo_phys->bpo_subobjs, &doi));
 110         epb = doi.doi_data_block_size / sizeof (uint64_t);
 111
 112         for (i = bpo.bpo_phys->bpo_num_subobjs - 1; i >= 0; i--) {
 113                 uint64_t *objarray;
 114                 uint64_t offset, blkoff;
 115
 116                 offset = i * sizeof (uint64_t);
 117                 blkoff = P2PHASE(i, epb);
 118
 119                 if (dbuf == NULL || dbuf->db_offset > offset) {
 120                         if (dbuf)
 121                                 dmu_buf_rele(dbuf, FTAG);
 122                         VERIFY3U(0, ==, dmu_buf_hold(os,
 123                             bpo.bpo_phys->bpo_subobjs, offset, FTAG, &dbuf, 0));
 124                 }
 125
 126                 ASSERT3U(offset, >=, dbuf->db_offset);
 127                 ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
 128
 129                 objarray = dbuf->db_data;
 130                 bpobj_free(os, objarray[blkoff], tx);
 131         }
 132         if (dbuf) {
 133                 dmu_buf_rele(dbuf, FTAG);
 134                 dbuf = NULL;
 135         }
 136         VERIFY3U(0, ==, dmu_object_free(os, bpo.bpo_phys->bpo_subobjs, tx));
 137
 138 out:
 139         mutex_exit(&bpo.bpo_lock);
 140         bpobj_close(&bpo);
 141
 142         VERIFY3U(0, ==, dmu_object_free(os, obj, tx));
 143 }
 144
 145 int
 146 bpobj_open(bpobj_t *bpo, objset_t *os, uint64_t object)
 147 {
 148         dmu_object_info_t doi;
 149         int err;
 150
 151         err = dmu_object_info(os, object, &doi);
 152         if (err)
 153                 return (err);
 154
 155         bzero(bpo, sizeof (*bpo));
 156         mutex_init(&bpo->bpo_lock, NULL, MUTEX_DEFAULT, NULL);
 157
 158         ASSERT(bpo->bpo_dbuf == NULL);
 159         ASSERT(bpo->bpo_phys == NULL);
 160         ASSERT(object != 0);
 161         ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ);
 162         ASSERT3U(doi.doi_bonus_type, ==, DMU_OT_BPOBJ_HDR);
 163
 164         err = dmu_bonus_hold(os, object, bpo, &bpo->bpo_dbuf);
 165         if (err)
 166                 return (err);
 167
 168         bpo->bpo_os = os;
 169         bpo->bpo_object = object;
 170         bpo->bpo_epb = doi.doi_data_block_size >> SPA_BLKPTRSHIFT;
 171         bpo->bpo_havecomp = (doi.doi_bonus_size > BPOBJ_SIZE_V0);
 172         bpo->bpo_havesubobj = (doi.doi_bonus_size > BPOBJ_SIZE_V1);
 173         bpo->bpo_phys = bpo->bpo_dbuf->db_data;
 174         return (0);
 175 }
 176
 177 void
 178 bpobj_close(bpobj_t *bpo)
 179 {
 180         /* Lame workaround for closing a bpobj that was never opened. */
 181         if (bpo->bpo_object == 0)
 182                 return;
 183
 184         dmu_buf_rele(bpo->bpo_dbuf, bpo);
 185         if (bpo->bpo_cached_dbuf != NULL)
 186                 dmu_buf_rele(bpo->bpo_cached_dbuf, bpo);
 187         bpo->bpo_dbuf = NULL;
 188         bpo->bpo_phys = NULL;
 189         bpo->bpo_cached_dbuf = NULL;
 190         bpo->bpo_object = 0;
 191
 192         mutex_destroy(&bpo->bpo_lock);
 193 }
 194
 195 static boolean_t
 196 bpobj_hasentries(bpobj_t *bpo)
 197 {
 198         return (bpo->bpo_phys->bpo_num_blkptrs != 0 ||
 199             (bpo->bpo_havesubobj && bpo->bpo_phys->bpo_num_subobjs != 0));
 200 }
 201
 202 static int
 203 bpobj_iterate_impl(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx,
 204     boolean_t free)
 205 {
 206         dmu_object_info_t doi;
 207         int epb;
 208         int64_t i;
 209         int err = 0;
 210         dmu_buf_t *dbuf = NULL;
 211
 212         mutex_enter(&bpo->bpo_lock);
 213
 214         if (free)
 215                 dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
 216
 217         for (i = bpo->bpo_phys->bpo_num_blkptrs - 1; i >= 0; i--) {
 218                 blkptr_t *bparray;
 219                 blkptr_t *bp;
 220                 uint64_t offset, blkoff;
 221
 222                 offset = i * sizeof (blkptr_t);
 223                 blkoff = P2PHASE(i, bpo->bpo_epb);
 224
 225                 if (dbuf == NULL || dbuf->db_offset > offset) {
 226                         if (dbuf)
 227                                 dmu_buf_rele(dbuf, FTAG);
 228                         err = dmu_buf_hold(bpo->bpo_os, bpo->bpo_object, offset,
 229                             FTAG, &dbuf, 0);
 230                         if (err)
 231                                 break;
 232                 }
 233
 234                 ASSERT3U(offset, >=, dbuf->db_offset);
 235                 ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
 236
 237                 bparray = dbuf->db_data;
 238                 bp = &bparray[blkoff];
 239                 err = func(arg, bp, tx);
 240                 if (err)
 241                         break;
 242                 if (free) {
 243                         bpo->bpo_phys->bpo_bytes -=
 244                             bp_get_dsize_sync(dmu_objset_spa(bpo->bpo_os), bp);
 245                         ASSERT3S(bpo->bpo_phys->bpo_bytes, >=, 0);
 246                         if (bpo->bpo_havecomp) {
 247                                 bpo->bpo_phys->bpo_comp -= BP_GET_PSIZE(bp);
 248                                 bpo->bpo_phys->bpo_uncomp -= BP_GET_UCSIZE(bp);
 249                         }
 250                         bpo->bpo_phys->bpo_num_blkptrs--;
 251                         ASSERT3S(bpo->bpo_phys->bpo_num_blkptrs, >=, 0);
 252                 }
 253         }
 254         if (dbuf) {
 255                 dmu_buf_rele(dbuf, FTAG);
 256                 dbuf = NULL;
 257         }
 258         if (free) {
 259                 VERIFY3U(0, ==, dmu_free_range(bpo->bpo_os, bpo->bpo_object,
 260                     (i + 1) * sizeof (blkptr_t), -1ULL, tx));
 261         }
 262         if (err || !bpo->bpo_havesubobj || bpo->bpo_phys->bpo_subobjs == 0)
 263                 goto out;
 264
 265         ASSERT(bpo->bpo_havecomp);
 266         err = dmu_object_info(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs, &doi);
 267         if (err) {
 268                 mutex_exit(&bpo->bpo_lock);
 269                 return (err);
 270         }
 271         ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ_SUBOBJ);
 272         epb = doi.doi_data_block_size / sizeof (uint64_t);
 273
 274         for (i = bpo->bpo_phys->bpo_num_subobjs - 1; i >= 0; i--) {
 275                 uint64_t *objarray;
 276                 uint64_t offset, blkoff;
 277                 bpobj_t sublist;
 278                 uint64_t used_before, comp_before, uncomp_before;
 279                 uint64_t used_after, comp_after, uncomp_after;
 280
 281                 offset = i * sizeof (uint64_t);
 282                 blkoff = P2PHASE(i, epb);
 283
 284                 if (dbuf == NULL || dbuf->db_offset > offset) {
 285                         if (dbuf)
 286                                 dmu_buf_rele(dbuf, FTAG);
 287                         err = dmu_buf_hold(bpo->bpo_os,
 288                             bpo->bpo_phys->bpo_subobjs, offset, FTAG, &dbuf, 0);
 289                         if (err)
 290                                 break;
 291                 }
 292
 293                 ASSERT3U(offset, >=, dbuf->db_offset);
 294                 ASSERT3U(offset, <, dbuf->db_offset + dbuf->db_size);
 295
 296                 objarray = dbuf->db_data;
 297                 err = bpobj_open(&sublist, bpo->bpo_os, objarray[blkoff]);
 298                 if (err)
 299                         break;
 300                 if (free) {
 301                         err = bpobj_space(&sublist,
 302                             &used_before, &comp_before, &uncomp_before);
 303                         if (err)
 304                                 break;
 305                 }
 306                 err = bpobj_iterate_impl(&sublist, func, arg, tx, free);
 307                 if (free) {
 308                         VERIFY3U(0, ==, bpobj_space(&sublist,
 309                             &used_after, &comp_after, &uncomp_after));
 310                         bpo->bpo_phys->bpo_bytes -= used_before - used_after;
 311                         ASSERT3S(bpo->bpo_phys->bpo_bytes, >=, 0);
 312                         bpo->bpo_phys->bpo_comp -= comp_before - comp_after;
 313                         bpo->bpo_phys->bpo_uncomp -=
 314                             uncomp_before - uncomp_after;
 315                 }
 316
 317                 bpobj_close(&sublist);
 318                 if (err)
 319                         break;
 320                 if (free) {
 321                         err = dmu_object_free(bpo->bpo_os,
 322                             objarray[blkoff], tx);
 323                         if (err)
 324                                 break;
 325                         bpo->bpo_phys->bpo_num_subobjs--;
 326                         ASSERT3S(bpo->bpo_phys->bpo_num_subobjs, >=, 0);
 327                 }
 328         }
 329         if (dbuf) {
 330                 dmu_buf_rele(dbuf, FTAG);
 331                 dbuf = NULL;
 332         }
 333         if (free) {
 334                 VERIFY3U(0, ==, dmu_free_range(bpo->bpo_os,
 335                     bpo->bpo_phys->bpo_subobjs,
 336                     (i + 1) * sizeof (uint64_t), -1ULL, tx));
 337         }
 338
 339 out:
 340         /* If there are no entries, there should be no bytes. */
 341         if (!bpobj_hasentries(bpo)) {
 342                 ASSERT0(bpo->bpo_phys->bpo_bytes);
 343                 ASSERT0(bpo->bpo_phys->bpo_comp);
 344                 ASSERT0(bpo->bpo_phys->bpo_uncomp);
 345         }
 346
 347         mutex_exit(&bpo->bpo_lock);
 348         return (err);
 349 }
 350
 351 /*
 352  * Iterate and remove the entries.  If func returns nonzero, iteration
 353  * will stop and that entry will not be removed.
 354  */
 355 int
 356 bpobj_iterate(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx)
 357 {
 358         return (bpobj_iterate_impl(bpo, func, arg, tx, B_TRUE));
 359 }
 360
 361 /*
 362  * Iterate the entries.  If func returns nonzero, iteration will stop.
 363  */
 364 int
 365 bpobj_iterate_nofree(bpobj_t *bpo, bpobj_itor_t func, void *arg, dmu_tx_t *tx)
 366 {
 367         return (bpobj_iterate_impl(bpo, func, arg, tx, B_FALSE));
 368 }
 369
 370 void
 371 bpobj_enqueue_subobj(bpobj_t *bpo, uint64_t subobj, dmu_tx_t *tx)
 372 {
 373         bpobj_t subbpo;
 374         uint64_t used, comp, uncomp, subsubobjs;
 375
 376         ASSERT(bpo->bpo_havesubobj);
 377         ASSERT(bpo->bpo_havecomp);
 378         ASSERT(bpo->bpo_object != dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj);
 379
 380         if (subobj == dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj) {
 381                 bpobj_decr_empty(bpo->bpo_os, tx);
 382                 return;
 383         }
 384
 385         VERIFY3U(0, ==, bpobj_open(&subbpo, bpo->bpo_os, subobj));
 386         VERIFY3U(0, ==, bpobj_space(&subbpo, &used, &comp, &uncomp));
 387
 388         if (!bpobj_hasentries(&subbpo)) {
 389                 /* No point in having an empty subobj. */
 390                 bpobj_close(&subbpo);
 391                 bpobj_free(bpo->bpo_os, subobj, tx);
 392                 return;
 393         }
 394
 395         dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
 396         if (bpo->bpo_phys->bpo_subobjs == 0) {
 397                 bpo->bpo_phys->bpo_subobjs = dmu_object_alloc(bpo->bpo_os,
 398                     DMU_OT_BPOBJ_SUBOBJ, SPA_OLD_MAXBLOCKSIZE,
 399                     DMU_OT_NONE, 0, tx);
 400         }
 401
 402         dmu_object_info_t doi;
 403         ASSERT0(dmu_object_info(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs, &doi));
 404         ASSERT3U(doi.doi_type, ==, DMU_OT_BPOBJ_SUBOBJ);
 405
 406         mutex_enter(&bpo->bpo_lock);
 407         dmu_write(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs,
 408             bpo->bpo_phys->bpo_num_subobjs * sizeof (subobj),
 409             sizeof (subobj), &subobj, tx);
 410         bpo->bpo_phys->bpo_num_subobjs++;
 411
 412         /*
 413          * If subobj has only one block of subobjs, then move subobj's
 414          * subobjs to bpo's subobj list directly.  This reduces
 415          * recursion in bpobj_iterate due to nested subobjs.
 416          */
 417         subsubobjs = subbpo.bpo_phys->bpo_subobjs;
 418         if (subsubobjs != 0) {
 419                 dmu_object_info_t doi;
 420
 421                 VERIFY3U(0, ==, dmu_object_info(bpo->bpo_os, subsubobjs, &doi));
 422                 if (doi.doi_max_offset == doi.doi_data_block_size) {
 423                         dmu_buf_t *subdb;
 424                         uint64_t numsubsub = subbpo.bpo_phys->bpo_num_subobjs;
 425
 426                         VERIFY3U(0, ==, dmu_buf_hold(bpo->bpo_os, subsubobjs,
 427                             0, FTAG, &subdb, 0));
 428                         /*
 429                          * Make sure that we are not asking dmu_write()
 430                          * to write more data than we have in our buffer.
 431                          */
 432                         VERIFY3U(subdb->db_size, >=,
 433                             numsubsub * sizeof (subobj));
 434                         dmu_write(bpo->bpo_os, bpo->bpo_phys->bpo_subobjs,
 435                             bpo->bpo_phys->bpo_num_subobjs * sizeof (subobj),
 436                             numsubsub * sizeof (subobj), subdb->db_data, tx);
 437                         dmu_buf_rele(subdb, FTAG);
 438                         bpo->bpo_phys->bpo_num_subobjs += numsubsub;
 439
 440                         dmu_buf_will_dirty(subbpo.bpo_dbuf, tx);
 441                         subbpo.bpo_phys->bpo_subobjs = 0;
 442                         VERIFY3U(0, ==, dmu_object_free(bpo->bpo_os,
 443                             subsubobjs, tx));
 444                 }
 445         }
 446         bpo->bpo_phys->bpo_bytes += used;
 447         bpo->bpo_phys->bpo_comp += comp;
 448         bpo->bpo_phys->bpo_uncomp += uncomp;
 449         mutex_exit(&bpo->bpo_lock);
 450
 451         bpobj_close(&subbpo);
 452 }
 453
 454 void
 455 bpobj_enqueue(bpobj_t *bpo, const blkptr_t *bp, dmu_tx_t *tx)
 456 {
 457         blkptr_t stored_bp = *bp;
 458         uint64_t offset;
 459         int blkoff;
 460         blkptr_t *bparray;
 461
 462         ASSERT(!BP_IS_HOLE(bp));
 463         ASSERT(bpo->bpo_object != dmu_objset_pool(bpo->bpo_os)->dp_empty_bpobj);
 464
 465         if (BP_IS_EMBEDDED(bp)) {
 466                 /*
 467                  * The bpobj will compress better without the payload.
 468                  *
 469                  * Note that we store EMBEDDED bp's because they have an
 470                  * uncompressed size, which must be accounted for.  An
 471                  * alternative would be to add their size to bpo_uncomp
 472                  * without storing the bp, but that would create additional
 473                  * complications: bpo_uncomp would be inconsistent with the
 474                  * set of BP's stored, and bpobj_iterate() wouldn't visit
 475                  * all the space accounted for in the bpobj.
 476                  */
 477                 bzero(&stored_bp, sizeof (stored_bp));
 478                 stored_bp.blk_prop = bp->blk_prop;
 479                 stored_bp.blk_birth = bp->blk_birth;
 480         } else if (!BP_GET_DEDUP(bp)) {
 481                 /* The bpobj will compress better without the checksum */
 482                 bzero(&stored_bp.blk_cksum, sizeof (stored_bp.blk_cksum));
 483         }
 484
 485         /* We never need the fill count. */
 486         stored_bp.blk_fill = 0;
 487
 488         mutex_enter(&bpo->bpo_lock);
 489
 490         offset = bpo->bpo_phys->bpo_num_blkptrs * sizeof (stored_bp);
 491         blkoff = P2PHASE(bpo->bpo_phys->bpo_num_blkptrs, bpo->bpo_epb);
 492
 493         if (bpo->bpo_cached_dbuf == NULL ||
 494             offset < bpo->bpo_cached_dbuf->db_offset ||
 495             offset >= bpo->bpo_cached_dbuf->db_offset +
 496             bpo->bpo_cached_dbuf->db_size) {
 497                 if (bpo->bpo_cached_dbuf)
 498                         dmu_buf_rele(bpo->bpo_cached_dbuf, bpo);
 499                 VERIFY3U(0, ==, dmu_buf_hold(bpo->bpo_os, bpo->bpo_object,
 500                     offset, bpo, &bpo->bpo_cached_dbuf, 0));
 501         }
 502
 503         dmu_buf_will_dirty(bpo->bpo_cached_dbuf, tx);
 504         bparray = bpo->bpo_cached_dbuf->db_data;
 505         bparray[blkoff] = stored_bp;
 506
 507         dmu_buf_will_dirty(bpo->bpo_dbuf, tx);
 508         bpo->bpo_phys->bpo_num_blkptrs++;
 509         bpo->bpo_phys->bpo_bytes +=
 510             bp_get_dsize_sync(dmu_objset_spa(bpo->bpo_os), bp);
 511         if (bpo->bpo_havecomp) {
 512                 bpo->bpo_phys->bpo_comp += BP_GET_PSIZE(bp);
 513                 bpo->bpo_phys->bpo_uncomp += BP_GET_UCSIZE(bp);
 514         }
 515         mutex_exit(&bpo->bpo_lock);
 516 }
 517
 518 struct space_range_arg {
 519         spa_t *spa;
 520         uint64_t mintxg;
 521         uint64_t maxtxg;
 522         uint64_t used;
 523         uint64_t comp;
 524         uint64_t uncomp;
 525 };
 526
 527 /* ARGSUSED */
 528 static int
 529 space_range_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
 530 {
 531         struct space_range_arg *sra = arg;
 532
 533         if (bp->blk_birth > sra->mintxg && bp->blk_birth <= sra->maxtxg) {
 534                 if (dsl_pool_sync_context(spa_get_dsl(sra->spa)))
 535                         sra->used += bp_get_dsize_sync(sra->spa, bp);
 536                 else
 537                         sra->used += bp_get_dsize(sra->spa, bp);
 538                 sra->comp += BP_GET_PSIZE(bp);
 539                 sra->uncomp += BP_GET_UCSIZE(bp);
 540         }
 541         return (0);
 542 }
 543
 544 int
 545 bpobj_space(bpobj_t *bpo, uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
 546 {
 547         mutex_enter(&bpo->bpo_lock);
 548
 549         *usedp = bpo->bpo_phys->bpo_bytes;
 550         if (bpo->bpo_havecomp) {
 551                 *compp = bpo->bpo_phys->bpo_comp;
 552                 *uncompp = bpo->bpo_phys->bpo_uncomp;
 553                 mutex_exit(&bpo->bpo_lock);
 554                 return (0);
 555         } else {
 556                 mutex_exit(&bpo->bpo_lock);
 557                 return (bpobj_space_range(bpo, 0, UINT64_MAX,
 558                     usedp, compp, uncompp));
 559         }
 560 }
 561
 562 /*
 563  * Return the amount of space in the bpobj which is:
 564  * mintxg < blk_birth <= maxtxg
 565  */
 566 int
 567 bpobj_space_range(bpobj_t *bpo, uint64_t mintxg, uint64_t maxtxg,
 568     uint64_t *usedp, uint64_t *compp, uint64_t *uncompp)
 569 {
 570         struct space_range_arg sra = { 0 };
 571         int err;
 572
 573         /*
 574          * As an optimization, if they want the whole txg range, just
 575          * get bpo_bytes rather than iterating over the bps.
 576          */
 577         if (mintxg < TXG_INITIAL && maxtxg == UINT64_MAX && bpo->bpo_havecomp)
 578                 return (bpobj_space(bpo, usedp, compp, uncompp));
 579
 580         sra.spa = dmu_objset_spa(bpo->bpo_os);
 581         sra.mintxg = mintxg;
 582         sra.maxtxg = maxtxg;
 583
 584         err = bpobj_iterate_nofree(bpo, space_range_cb, &sra, NULL);
 585         *usedp = sra.used;
 586         *compp = sra.comp;
 587         *uncompp = sra.uncomp;
 588         return (err);
 589 }