3 # This is rc.conf - a file full of useful variables that you can set
4 # to change the default startup behavior of your system. You should
5 # not edit this file! Put any overrides into one of the ${rc_conf_files}
6 # instead and you will be able to update these defaults later without
7 # spamming your local configuration information.
9 # The ${rc_conf_files} files should only contain values which override
10 # values set in this file. This eases the upgrade path when defaults
11 # are changed and new features are added.
13 # All arguments must be in double or single quotes.
15 # For a more detailed explanation of all the rc.conf variables, please
16 # refer to the rc.conf(5) manual page.
20 ##############################################################
21 ### Important initial Boot-time options ####################
22 ##############################################################
24 rc_debug="NO" # Set to YES to enable debugging output from rc.d
25 rc_info="NO" # Enables display of informational messages at boot.
26 rc_startmsgs="YES" # Show "Starting foo:" messages at boot
27 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
28 early_late_divider="FILESYSTEMS" # Script that separates early/late
29 # stages of the boot process. Make sure you know
30 # the ramifications if you change this.
31 # See rc.conf(5) for more details.
33 swapfile="NO" # Set to name of swapfile if aux swapfile desired.
34 apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO).
35 apmd_enable="NO" # Run apmd to handle APM event from userland.
36 apmd_flags="" # Flags to apmd (if enabled).
37 ddb_enable="NO" # Set to YES to load ddb scripts at boot.
38 ddb_config="/etc/ddb.conf" # ddb(8) config file.
39 devd_enable="YES" # Run devd, to trigger programs on device tree changes.
40 devd_flags="" # Additional flags for devd(8).
41 kldxref_enable="NO" # Build linker.hints files with kldxref(8).
42 kldxref_clobber="NO" # Overwrite old linker.hints at boot.
43 kldxref_module_path="" # Override kern.module_path. A ';'-delimited list.
44 powerd_enable="NO" # Run powerd to lower our power usage.
45 powerd_flags="" # Flags to powerd (if enabled).
46 tmpmfs="AUTO" # Set to YES to always create an mfs /tmp, NO to never
47 tmpsize="20m" # Size of mfs /tmp if created
48 tmpmfs_flags="-S" # Extra mdmfs options for the mfs /tmp
49 varmfs="AUTO" # Set to YES to always create an mfs /var, NO to never
50 varsize="32m" # Size of mfs /var if created
51 varmfs_flags="-S" # Extra mount options for the mfs /var
52 populate_var="AUTO" # Set to YES to always (re)populate /var, NO to never
53 cleanvar_enable="YES" # Clean the /var directory
54 local_startup="/usr/local/etc/rc.d" # startup script dirs.
55 script_name_sep=" " # Change if your startup scripts' names contain spaces
56 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
59 zfs_enable="NO" # Set to YES to automatically mount ZFS file systems
61 # Experimental - test before enabling
62 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
63 gbde_devices="NO" # Devices to automatically attach (list, or AUTO)
64 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
65 gbde_lockdir="/etc" # Where to look for gbde lockfiles
67 # GELI disk encryption configuration.
68 geli_devices="" # List of devices to automatically attach in addition to
69 # GELI devices listed in /etc/fstab.
70 geli_tries="" # Number of times to attempt attaching geli device.
71 # If empty, kern.geom.eli.tries will be used.
72 geli_default_flags="" # Default flags for geli(8).
73 geli_autodetach="YES" # Automatically detach on last close.
74 # Providers are marked as such when all file systems are
77 #geli_devices="da1 mirror/home"
78 #geli_da1_flags="-p -k /etc/geli/da1.keys"
79 #geli_da1_autodetach="NO"
80 #geli_mirror_home_flags="-k /etc/geli/home.keys"
82 geli_swap_flags="-e aes -l 256 -s 4096 -d" # Options for GELI-encrypted
85 root_rw_mount="YES" # Set to NO to inhibit remounting root read-write.
86 fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails.
87 fsck_y_flags="" # Additional flags for fsck -y
88 background_fsck="YES" # Attempt to run fsck in the background where possible.
89 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
90 netfs_types="nfs:NFS nfs4:NFS4 smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
91 extra_netfs_types="NO" # List of network extra filesystem types for delayed
92 # mount at startup (or NO).
94 ##############################################################
95 ### Network configuration sub-section ######################
96 ##############################################################
98 ### Basic network and firewall/security options: ###
99 hostname="" # Set this!
100 hostid_enable="YES" # Set host UUID.
101 hostid_file="/etc/hostid" # File with hostuuid.
102 nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
103 dhclient_program="/sbin/dhclient" # Path to dhcp client program.
104 dhclient_flags="" # Extra flags to pass to dhcp client.
105 #dhclient_flags_fxp0="" # Extra dhclient flags for fxp0 only
106 background_dhclient="NO" # Start dhcp client in the background.
107 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
108 synchronous_dhclient="NO" # Start dhclient directly on configured
109 # interfaces during startup.
110 defaultroute_delay="30" # Time to wait for a default route on a DHCP interface.
111 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
112 wpa_supplicant_flags="-s" # Extra flags to pass to wpa_supplicant
113 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
115 firewall_enable="NO" # Set to YES to enable firewall functionality
116 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
117 firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
118 firewall_quiet="NO" # Set to YES to suppress rule display
119 firewall_logging="NO" # Set to YES to enable events logging
120 firewall_flags="" # Flags passed to ipfw when type is a file
121 firewall_client_net="192.0.2.0/24" # Network address for "client" firewall.
122 firewall_simple_iif="ed1" # Inside network interface for "simple"
124 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
126 firewall_simple_oif="ed0" # Outside network interface for "simple"
128 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
130 firewall_myservices="" # List of TCP ports on which this host
131 # offers services for "workstation" firewall.
132 firewall_allowservices="" # List of IPs which have access to
133 # $firewall_myservices for "workstation"
135 firewall_trusted="" # List of IPs which have full access to this
136 # host for "workstation" firewall.
137 firewall_logdeny="NO" # Set to YES to log default denied incoming
138 # packets for "workstation" firewall.
139 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
140 # for which denied incoming packets are not
141 # logged for "workstation" firewall.
142 firewall_nat_enable="NO" # Enable kernel NAT (if firewall_enable == YES)
143 firewall_nat_interface="" # Public interface or IPaddress to use
144 firewall_nat_flags="" # Additional configuration parameters
145 dummynet_enable="NO" # Load the dummynet(4) module
146 ip_portrange_first="NO" # Set first dynamically allocated port
147 ip_portrange_last="NO" # Set last dynamically allocated port
148 ike_enable="NO" # Enable IKE daemon (usually racoon or isakmpd)
149 ike_program="/usr/local/sbin/isakmpd" # Path to IKE daemon
150 ike_flags="" # Additional flags for IKE daemon
151 ipsec_enable="NO" # Set to YES to run setkey on ipsec_file
152 ipsec_file="/etc/ipsec.conf" # Name of config file for setkey
153 natd_program="/sbin/natd" # path to natd, if you want a different one.
154 natd_enable="NO" # Enable natd (if firewall_enable == YES).
155 natd_interface="" # Public interface or IPaddress to use.
156 natd_flags="" # Additional flags for natd.
157 ipfilter_enable="NO" # Set to YES to enable ipfilter functionality
158 ipfilter_program="/sbin/ipf" # where the ipfilter program lives
159 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
160 # /usr/src/contrib/ipfilter/rules for examples
161 ipfilter_flags="" # additional flags for ipfilter
162 ipnat_enable="NO" # Set to YES to enable ipnat functionality
163 ipnat_program="/sbin/ipnat" # where the ipnat program lives
164 ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat
165 ipnat_flags="" # additional flags for ipnat
166 ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat
167 ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives
168 ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog"
169 ipfs_enable="NO" # Set to YES to enable saving and restoring
170 # of state tables at shutdown and boot
171 ipfs_program="/sbin/ipfs" # where the ipfs program lives
172 ipfs_flags="" # additional flags for ipfs
173 pf_enable="NO" # Set to YES to enable packet filter (pf)
174 pf_rules="/etc/pf.conf" # rules definition file for pf
175 pf_program="/sbin/pfctl" # where the pfctl program lives
176 pf_flags="" # additional flags for pfctl
177 pflog_enable="NO" # Set to YES to enable packet filter logging
178 pflog_logfile="/var/log/pflog" # where pflogd should store the logfile
179 pflog_program="/sbin/pflogd" # where the pflogd program lives
180 pflog_flags="" # additional flags for pflogd
181 ftpproxy_enable="NO" # Set to YES to enable ftp-proxy(8) for pf
182 ftpproxy_flags="" # additional flags for ftp-proxy(8)
183 pfsync_enable="NO" # Expose pf state to other hosts for syncing
184 pfsync_syncdev="" # Interface for pfsync to work through
185 pfsync_syncpeer="" # IP address of pfsync peer host
186 pfsync_ifconfig="" # Additional options to ifconfig(8) for pfsync
187 tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions.
188 log_in_vain="0" # >=1 to log connects to ports w/o listeners.
189 tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO).
190 tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN
191 # NOTE: this violates the TCP specification
192 icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets
193 icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets
194 network_interfaces="auto" # List of network interfaces (or "auto").
195 cloned_interfaces="" # List of cloned network interfaces to create.
196 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
197 ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
198 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
199 #ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry.
200 #ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0.
201 #wlans_ath0="wlan0" # wlan(4) interfaces for ath0 device
202 #wlandebug_wlan0="scan+auth+assoc" # Set debug flags with wlanddebug(8)
203 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
205 #autobridge_interfaces="bridge0" # List of bridges to check
206 #autobridge_bridge0="tap* vlan0" # Interface glob to automatically add to the bridge
208 # If you have any sppp(4) interfaces above, you might also want to set
209 # the following parameters. Refer to spppcontrol(8) for their meaning.
210 sppp_interfaces="" # List of sppp interfaces.
211 #sppp_interfaces="...0" # example: sppp over ...
212 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
213 gif_interfaces="" # List of GIF tunnels.
214 #gif_interfaces="gif0 gif1" # Examples typically for a router.
215 # Choose correct tunnel addrs.
216 #gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router.
217 #gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router.
218 fec_interfaces="" # List of Fast EtherChannels.
219 #fec_interfaces="fec0 fec1"
220 #fecconfig_fec0="fxp0 dc0" # Examples typically for two NICs
221 #fecconfig_fec1="em0 em1 bge0 bge1" # Examples typically for four NICs
223 # User ppp configuration.
224 ppp_enable="NO" # Start user-ppp (or NO).
225 ppp_program="/usr/sbin/ppp" # Path to user-ppp program.
226 ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated".
227 # For details see man page for ppp(8). Default is auto.
228 ppp_nat="YES" # Use PPP's internal network address translation or NO.
229 ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf.
230 ppp_user="root" # Which user to run ppp as
232 # Start multiple instances of ppp at boot time
233 #ppp_profile="profile1 profile2 profile3" # Which profiles to use
234 #ppp_profile1_mode="ddial" # Override ppp mode for profile1
235 #ppp_profile2_nat="NO" # Override nat mode for profile2
236 # profile3 uses default ppp_mode and ppp_nat
238 ### Network daemon (miscellaneous) ###
239 hostapd_enable="NO" # Run hostap daemon.
240 syslogd_enable="YES" # Run syslog daemon (or NO).
241 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
242 syslogd_flags="-s" # Flags to syslogd (if enabled).
243 inetd_enable="NO" # Run the network daemon dispatcher (YES/NO).
244 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
245 inetd_flags="-wW -C 60" # Optional flags to inetd
247 # named. It may be possible to run named in a sandbox, man security for
250 named_enable="NO" # Run named, the DNS server (or NO).
251 named_program="/usr/sbin/named" # Path to named, if you want a different one.
252 named_conf="/etc/namedb/named.conf" # Path to the configuration file
253 #named_flags="-c /etc/namedb/named.conf" # Uncomment for named not in /usr/sbin
254 named_pidfile="/var/run/named/pid" # Must set this in named.conf as well
255 named_uid="bind" # User to run named as
256 named_chrootdir="/var/named" # Chroot directory (or "" not to auto-chroot it)
257 named_chroot_autoupdate="YES" # Automatically install/update chrooted
258 # components of named. See /etc/rc.d/named.
259 named_symlink_enable="YES" # Symlink the chrooted pid file
260 named_wait="NO" # Wait for working name service before exiting
261 named_wait_host="localhost" # Hostname to check if named_wait is enabled
262 named_auto_forward="NO" # Set up forwarders from /etc/resolv.conf
263 named_auto_forward_only="NO" # Do "forward only" instead of "forward first"
266 # kerberos. Do not run the admin daemons on slave servers
268 kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO).
269 kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC
270 kerberos5_server_flags="--detach" # Additional flags to the kerberos 5 server
271 kadmind5_server_enable="NO" # Run kadmind (or NO)
272 kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon
273 kpasswdd_server_enable="NO" # Run kpasswdd (or NO)
274 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
276 gssd_enable="NO" # Run the gssd daemon (or NO).
277 gssd_flags="" # Flags for gssd.
279 rwhod_enable="NO" # Run the rwho daemon (or NO).
280 rwhod_flags="" # Flags for rwhod
281 rarpd_enable="NO" # Run rarpd (or NO).
282 rarpd_flags="-a" # Flags to rarpd.
283 bootparamd_enable="NO" # Run bootparamd (or NO).
284 bootparamd_flags="" # Flags to bootparamd
285 pppoed_enable="NO" # Run the PPP over Ethernet daemon.
286 pppoed_provider="*" # Provider and ppp(8) config file entry.
287 pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled).
288 pppoed_interface="fxp0" # The interface that pppoed runs on.
289 sshd_enable="NO" # Enable sshd
290 sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one.
291 sshd_flags="" # Additional flags for sshd.
292 ftpd_enable="NO" # Enable stand-alone ftpd.
293 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
294 ftpd_flags="" # Additional flags to stand-alone ftpd.
296 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
297 amd_enable="NO" # Run amd service with $amd_flags (or NO).
298 amd_program="/usr/sbin/amd" # path to amd, if you want a different one.
299 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
300 amd_map_program="NO" # Can be set to "ypcat -k amd.master"
301 nfs_client_enable="NO" # This host is an NFS client (or NO).
302 nfs_access_cache="60" # Client cache timeout in seconds
303 nfs_server_enable="NO" # This host is an NFS server (or NO).
304 nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled).
305 mountd_enable="NO" # Run mountd (or NO).
306 mountd_flags="-r" # Flags to mountd (if NFS server enabled).
307 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
308 nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
309 nfs_bufpackets="" # bufspace (in packets) for client
310 rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server.
311 rpc_lockd_flags="" # Flags to rpc.lockd (if enabled).
312 rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server.
313 rpc_statd_flags="" # Flags to rpc.statd (if enabled).
314 rpcbind_enable="NO" # Run the portmapper service (YES/NO).
315 rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one.
316 rpcbind_flags="" # Flags to rpcbind (if enabled).
317 rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO).
318 keyserv_enable="NO" # Run the SecureRPC keyserver (or NO).
319 keyserv_flags="" # Flags to keyserv (if enabled).
320 nfsv4_server_enable="NO" # Enable support for NFSv4
321 nfscbd_enable="NO" # NFSv4 client side callback daemon
322 nfscbd_flags="" # Flags for nfscbd
323 nfsuserd_enable="NO" # NFSv4 user/group name mapping daemon
324 nfsuserd_flags="" # Flags for nfsuserd
326 ### Network Time Services options: ###
327 timed_enable="NO" # Run the time daemon (or NO).
328 timed_flags="" # Flags to timed (if enabled).
329 ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO).
330 ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one.
331 ntpdate_flags="-b" # Flags to ntpdate (if enabled).
332 ntpdate_config="/etc/ntp.conf" # ntpdate(8) configuration file
333 ntpdate_hosts="" # Whitespace-separated list of ntpdate(8) servers.
334 ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO).
335 ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one.
336 ntpd_config="/etc/ntp.conf" # ntpd(8) configuration file
337 ntpd_sync_on_start="NO" # Sync time on ntpd startup, even if offset is high
338 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
339 # Flags to ntpd (if enabled).
341 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
342 nis_client_enable="NO" # We're an NIS client (or NO).
343 nis_client_flags="" # Flags to ypbind (if enabled).
344 nis_ypset_enable="NO" # Run ypset at boot time (or NO).
345 nis_ypset_flags="" # Flags to ypset (if enabled).
346 nis_server_enable="NO" # We're an NIS server (or NO).
347 nis_server_flags="" # Flags to ypserv (if enabled).
348 nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
349 nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
350 nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
351 nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
354 # Be sure to understand the security implications of running SNMP v1/v2
356 bsnmpd_enable="NO" # Run the SNMP daemon (or NO).
357 bsnmpd_flags="" # Flags for bsnmpd.
359 ### Network routing options: ###
360 defaultrouter="NO" # Set to default gateway (or NO).
361 static_routes="" # Set to static route list (or leave empty).
362 natm_static_routes="" # Set to static route list for NATM (or leave empty).
363 gateway_enable="NO" # Set to YES if this host will be a gateway.
364 router_enable="NO" # Set to YES to enable a routing daemon.
365 router="/sbin/routed" # Name of routing daemon to use if enabled.
366 router_flags="-q" # Flags for routing daemon.
367 mrouted_enable="NO" # Do IPv4 multicast routing.
368 mrouted_program="/usr/local/sbin/mrouted" # Name of IPv4 multicast
369 # routing daemon. You need to
370 # install it from package or
372 mrouted_flags="" # Flags for multicast routing daemon.
373 ipxgateway_enable="NO" # Set to YES to enable IPX routing.
374 ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
375 ipxrouted_flags="" # Flags for IPX routing daemon.
376 arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL.
377 forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES")
378 accept_sourceroute="NO" # accept source routed packets to us
380 ### ATM interface options: ###
381 atm_enable="NO" # Configure ATM interfaces (or NO).
382 #atm_netif_hea0="atm 1" # Network interfaces for physical interface.
383 #atm_sigmgr_hea0="uni31" # Signalling manager for physical interface.
384 #atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI).
385 #atm_macaddr_hea0="NO" # Override physical MAC address (or NO).
386 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
387 #atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO).
388 atm_pvcs="" # Set to PVC list (or leave empty).
389 atm_arps="" # Set to permanent ARP list (or leave empty).
392 hcsecd_enable="NO" # Enable hcsecd(8) (or NO)
393 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
395 sdpd_enable="NO" # Enable sdpd(8) (or NO)
396 sdpd_control="/var/run/sdp" # sdpd(8) control socket
397 sdpd_groupname="nobody" # set spdp(8) user/group to run as after
398 sdpd_username="nobody" # it initializes
400 bthidd_enable="NO" # Enable bthidd(8) (or NO)
401 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
402 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
404 rfcomm_pppd_server_enable="NO" # Enable rfcomm_pppd(8) in server mode (or NO)
405 rfcomm_pppd_server_profile="one two" # Profile to use from /etc/ppp/ppp.conf
407 #rfcomm_pppd_server_one_bdaddr="" # Override local bdaddr for 'one'
408 rfcomm_pppd_server_one_channel="1" # Override local channel for 'one'
409 #rfcomm_pppd_server_one_register_sp="NO" # Override SP and DUN register
410 #rfcomm_pppd_server_one_register_dun="NO" # for 'one'
412 #rfcomm_pppd_server_two_bdaddr="" # Override local bdaddr for 'two'
413 rfcomm_pppd_server_two_channel="3" # Override local channel for 'two'
414 #rfcomm_pppd_server_two_register_sp="NO" # Override SP and DUN register
415 #rfcomm_pppd_server_two_register_dun="NO" # for 'two'
417 ### Miscellaneous network options: ###
418 icmp_bmcastecho="NO" # respond to broadcast ping packets
420 ### IPv6 options: ###
421 ipv6_enable="NO" # Set to YES to set up for IPv6.
422 ipv6_network_interfaces="auto" # List of network interfaces (or "auto").
423 ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO).
424 #ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068)
425 ipv6_static_routes="" # Set to static route list (or leave empty).
426 #ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64
427 # route toward loopback interface.
428 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
429 ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway.
430 ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon.
431 ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon.
432 ipv6_router_flags="" # Flags to IPv6 routing daemon.
433 #ipv6_router_flags="-l" # Example for route6d with only IPv6 site local
435 #ipv6_router_flags="-q" # If you want to run a routing daemon on an end
436 # node, you should stop advertisement.
437 #ipv6_network_interfaces="ed0 ep0" # Examples for router
438 # or static configuration for end node.
439 # Choose correct prefix value.
440 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr.
441 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr.
442 #ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry
443 #ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry.
444 ipv6_default_interface="NO" # Default output interface for scoped addrs.
445 # Now this works only for IPv6 link local
447 rtsol_flags="" # Flags to IPv6 router solicitation.
448 rtadvd_enable="NO" # Set to YES to enable an IPv6 router
449 # advertisement daemon. If set to YES,
450 # this router becomes a possible candidate
451 # IPv6 default router for local subnets.
452 rtadvd_interfaces="" # Interfaces rtadvd sends RA packets.
453 mroute6d_enable="NO" # Do IPv6 multicast routing.
454 mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast
455 # routing daemon. You need to
456 # install it from package or
458 mroute6d_flags="" # Flags to IPv6 multicast routing daemon.
459 stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4
460 # tunneling interface. Specify this entry
461 # to enable 6to4 interface.
462 stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr,
463 # to limit peer addr range. Effective value
465 stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0.
466 # If you like, you can set "AUTO" for this.
467 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
468 ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH
469 # IPv6-to-IPv4 TCP translator. You also need
471 ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr
472 # communication. (like ::ffff:a.b.c.d)
473 ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall
475 ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall
476 ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6)
477 ipv6_firewall_quiet="NO" # Set to YES to suppress rule display
478 ipv6_firewall_logging="NO" # Set to YES to enable events logging
479 ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file
480 ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter,
481 # see /usr/src/contrib/ipfilter/rules
483 ip6addrctl_enable="YES" # Set to YES to enable default address selection
484 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
486 ##############################################################
487 ### System console options #################################
488 ##############################################################
490 keyboard="" # keyboard device to use (default /dev/kbd0).
491 keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
492 keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
493 keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable.
494 keychange="NO" # function keys default values (or NO).
495 cursor="NO" # cursor type {normal|blink|destructive} (or NO).
496 scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
497 font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
498 font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
499 font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
500 blanktime="300" # blank time (in seconds) or "NO" to turn it off.
501 saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko
502 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
503 # specifically overriden in rc.conf(5).
504 moused_enable="NO" # Run the mouse daemon.
505 moused_type="auto" # See man page for rc.conf(5) for available settings.
506 moused_port="/dev/psm0" # Set to your mouse port.
507 moused_flags="" # Any additional flags to moused.
508 mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your
509 # language code table, specify alternative range
510 # start like mousechar_start=3, see vidcontrol(1)
511 allscreens_flags="" # Set this vidcontrol mode for all virtual screens
512 allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens
514 ##############################################################
515 ### Mail Transfer Agent (MTA) options ######################
516 ##############################################################
518 mta_start_script="/etc/rc.sendmail"
519 # Script to start your chosen MTA, called by /etc/rc.
520 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
521 sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO).
522 sendmail_pidfile="/var/run/sendmail.pid" # sendmail pid file
523 sendmail_procname="/usr/sbin/sendmail" # sendmail process name
524 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
525 sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission
526 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
527 # Flags for localhost-only MTA
528 sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO).
529 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
530 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
531 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
532 # Flags for sendmail_msp_queue daemon.
533 sendmail_rebuild_aliases="NO" # Run newaliases if necessary (YES/NO).
536 ##############################################################
537 ### Miscellaneous administrative options ###################
538 ##############################################################
540 auditd_enable="NO" # Run the audit daemon.
541 auditd_program="/usr/sbin/auditd" # Path to the audit daemon.
542 auditd_flags="" # Which options to pass to the audit daemon.
543 cron_enable="YES" # Run the periodic job daemon.
544 cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled).
545 cron_dst="YES" # Handle DST transitions intelligently (YES/NO)
546 cron_flags="" # Which options to pass to the cron daemon.
547 lpd_enable="NO" # Run the line printer daemon.
548 lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one.
549 lpd_flags="" # Flags to lpd (if enabled).
550 nscd_enable="NO" # Run the nsswitch caching daemon.
551 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
552 chkprintcap_flags="-d" # Create missing directories by default.
553 dumpdev="NO" # Device to crashdump to (device name, AUTO, or NO).
554 dumpdir="/var/crash" # Directory where crash dumps are to be stored
555 savecore_flags="" # Used if dumpdev is enabled above, and present.
556 crashinfo_enable="YES" # Automatically generate crash dump summary.
557 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
558 quota_enable="NO" # turn on quotas on startup (or NO).
559 check_quotas="YES" # Check quotas on startup (or NO).
560 quotaon_flags="-a" # Turn quotas on for all file systems (if enabled)
561 quotaoff_flags="-a" # Turn quotas off for all file systems at shutdown
562 quotacheck_flags="-a" # Check all file system quotas (if enabled)
563 accounting_enable="NO" # Turn on process accounting (or NO).
564 ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
565 ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO).
567 # Emulation/compatibility services provided by /etc/rc.d/abi
568 sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO).
569 linux_enable="NO" # Linux binary compatibility loaded at startup (or NO).
570 svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO).
571 clear_tmp_enable="NO" # Clear /tmp at startup.
572 clear_tmp_X="YES" # Clear and recreate X11-related directories in /tmp
573 ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks
574 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
575 # shared library search paths
576 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
577 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
578 # a.out shared library search paths
579 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
580 # Local directories with ldconfig configuration files.
581 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
582 # Local directories with 32-bit compatibility ldconfig
583 # configuration files.
584 kern_securelevel_enable="NO" # kernel security level (see security(7))
585 kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure
586 # Note that setting securelevel to 0 will result
587 # in the system booting with securelevel set to 1, as
588 # init(8) will raise the level when rc(8) completes.
589 update_motd="YES" # update version info in /etc/motd (or NO)
590 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
591 # /var/db/entropy-file is preferred if / is not avail.
592 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
593 entropy_save_sz="2048" # Size of the entropy cache files.
594 entropy_save_num="8" # Number of entropy cache files to save.
595 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
596 harvest_ethernet="YES" # Entropy device harvests ethernet randomness
597 harvest_p_to_p="YES" # Entropy device harvests point-to-point randomness
598 dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot
599 watchdogd_enable="NO" # Start the software watchdog daemon
600 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
602 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
603 devfs_set_rulesets="" # A list of /mount/dev=ruleset_name settings to
604 # apply (must be mounted already, i.e. fstab(5))
605 performance_cx_lowest="HIGH" # Online CPU idle state
606 performance_cpu_freq="NONE" # Online CPU frequency
607 economy_cx_lowest="HIGH" # Offline CPU idle state
608 economy_cpu_freq="NONE" # Offline CPU frequency
609 virecover_enable="YES" # Perform housekeeping for the vi(1) editor
610 ugidfw_enable="NO" # Load mac_bsdextended(4) rules on boot
611 bsdextended_script="/etc/rc.bsdextended" # Default mac_bsdextended(4)
613 newsyslog_enable="YES" # Run newsyslog at startup.
614 newsyslog_flags="-CN" # Newsyslog flags to create marked files
615 mixer_enable="YES" # Run the sound mixer.
617 ##############################################################
618 ### Jail Configuration #######################################
619 ##############################################################
620 jail_enable="NO" # Set to NO to disable starting of any jails
621 jail_list="" # Space separated list of names of jails
622 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
623 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
624 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
627 # To use rc's built-in jail infrastructure create entries for
628 # each jail, specified in jail_list, with the following variables.
630 # - replace 'example' with the jail's name.
631 # - except rootdir, hostname, ip and the _multi<n> addresses,
632 # all of the following variables may be made global jail variables
633 # if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
635 #jail_example_rootdir="/usr/jail/default" # Jail's root directory
636 #jail_example_hostname="default.domain.com" # Jail's hostname
637 #jail_example_interface="" # Jail's interface variable to create IP aliases on
638 #jail_example_fib="0" # Routing table for setfib(1)
639 #jail_example_ip="192.0.2.10,2001:db8::17" # Jail's primary IPv4 and IPv6 address
640 #jail_example_ip_multi0="2001:db8::10" # and another IPv6 address
641 #jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting
642 #jail_example_exec_afterstart0="/bin/sh command" # command to execute after the one for
643 # starting the jail. More than one can be
644 # specified using a trailing number
645 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping
646 #jail_example_devfs_enable="NO" # mount devfs in the jail
647 #jail_example_devfs_ruleset="ruleset_name" # devfs ruleset to apply to jail -
648 # usually you want "devfsrules_jail".
649 #jail_example_fdescfs_enable="NO" # mount fdescfs in the jail
650 #jail_example_procfs_enable="NO" # mount procfs in jail
651 #jail_example_mount_enable="NO" # mount/umount jail's fs
652 #jail_example_fstab="" # fstab(5) for mount/umount
653 #jail_example_flags="-l -U root" # flags for jail(8)
655 ##############################################################
656 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
657 ### scripts to source rc_conf_files overrides safely. ##
658 ##############################################################
660 if [ -z "${source_rc_confs_defined}" ]; then
661 source_rc_confs_defined=yes
663 local i sourced_files
664 for i in ${rc_conf_files}; do
665 case ${sourced_files} in
669 sourced_files="${sourced_files}:$i:"
projects / FreeBSD / releng / 8.0.git / blob