4 # This file requires sysutils/makefs to run
6 # The PicoBSD build script. Invoked as
8 # picobsd [options] image_type [site_name]
10 # Where image_type is a directory with the picobsd config info,
11 # and ${image_type}/floppy.tree.${site_name} contains
12 # optional site-specific configuration.
14 # For Options, see the bottom of the file where the processing is
15 # done. The picobsd(8) manpage might be of some help, but code and docs
16 # tend to lose sync over time.
18 # This script depends on the following files:
21 # Makefile.conf Makefile used to build the kernel
22 # config shell variables, sourced here.
23 # mfs.mtree mtree config file
24 # floppy.tree/ files which go on the floppy
25 # mfs_tree/ files which go onto the mfs
28 # PICOBSD kernel config file
29 # config shell variables, sourced here.
30 # crunch.conf crunchgen configuration
31 # mfs.mtree overrides ${PICO_TREE}/mfs.mtree
32 # floppy.tree.exclude files from floppy.tree/ which we do not need here.
33 # floppy.tree/ local additions to ${PICO_TREE}/mfs_free
34 # floppy.tree.${site}/ same as above, site specific.
35 # mfs_tree/ local additions to the mfs_free
36 # buildtree.mk optional Makefile to build an extension for floppy tree
37 # (generated in buildtree/ )
40 #--- The main entry point is at the end.
43 # There are two initialization functions:
46 # is run on entry to the script, and is used to set default values
47 # for all variables that do not depend on image type and source tree.
49 # + set_build_parameters
50 # is run after command line parsing
53 # + variables that control operation (e.g. verbosity) and are generally
54 # set from the command line have o_ ("option") as a name prefix
56 # + variables that contain pathnames and values that should not change
57 # have c_ ("constant") as a name prefix
59 # + variables exported to Makefiles and subshells are CAPITAL
61 # + variables local to the script are lowercase, possibly with
62 # an l_ ("local") prefix.
64 # There are unfortunately exceptions:
65 # name, l_usrtree, l_objtree
67 # SRC points to your FreeBSD source tree.
68 # l_usrtree points to the /usr subdir for the source tree.
69 # Normally /usr or ${SRC}/../usr
70 # l_objtree points to the obj tree. Normally ${l_usrtree}/obj-pico
71 # c_label is either bsdlabel or disklabel
72 # PICO_TREE is where standard picobsd stuff resides.
73 # Normally ${SRC}/release/picobsd
74 # You can set SRC with --src <directory>
75 # It is not recommended to override the other variables.
77 # MY_TREE (set later) is where this floppy type resides.
78 # BUILDDIR is the build directory
80 # log something on stdout if verbose.
81 o_verbose=0 # this needs to be here!
84 [ ${o_verbose} -gt 0 ] && printf "\n*** %s\n" "$*"
85 [ ${o_verbose} -gt 1 ] && read -p "=== Press enter to continue" foo
89 # unconditionally log and wait for input
90 logverbose() { # message
92 printf "\n*** %s\n" "$*"
93 read -p "=== Press enter to continue" foo
97 # set some default values for variables.
98 # needs to be done as the first thing in the script.
100 set_defaults() { # no arguments
101 # EDITOR is the editor you use
102 # fd_size floppy size in KB (default to 1440). You can use 1480,
103 # 1720, 2880, etc. but beware that only 1440 and 1480 will boot
104 # from 1.44M floppy drives (1480 will not work on vmware).
106 fd_size=${fd_size:-1440}
108 o_use_loader="yes" # use /boot/loader
109 # You should not change it unless you are really short
110 # of space, and your kernel is small enough that the
111 # bootblocks manage to load it.
113 o_all_in_mfs="yes" # put all files in mfs so you can boot
114 # and run the image via diskless boot.
115 o_clean="" # set if you want to clean prev.builds.
116 o_interactive="" # default is interactive
117 o_verbose=0 # verbose level, 0 is silent
118 o_tarv="" # tar verbose flag, "" or "v"
119 o_init_src="" # set to build libs and includes.
120 o_makeopts=${MAKEOPTS:--s} # make options, be silent by default
121 o_no_devfs= # default is use devfs.
122 # You should only set it when building 4.x images
123 o_do_modules="" # do not build modules
125 SRC="/usr/src" # default location for sources
126 c_startdir=`pwd` # directory where we start
127 # used to lookup config and create BUILDDIR
129 # XXX 6.x/7.x have a single /boot/boot block, which is the concatenation
130 # of the old two. For the time being, we keep these, but this should
131 # be fixed at some point.
134 c_boot1=/boot/boot1 # boot blocks (in case you want custom ones)
137 c_reply=${c_reply:-`mktemp "/tmp/reply.XXXXXXXXXX"`}
138 # file where User replies will be put
139 c_mnt=`mktemp -d "/tmp/picobsd.XXXXXXXXXX"`
140 # mountpoint used to build memory filesystems
141 c_fs=fs.PICOBSD # filename used for the memory filesystem
142 c_img=picobsd.bin # filename used for the picobsd image
143 c_iso=picobsd.iso # filename used for the ISO image
144 generate_iso="NO" # don't generate the iso image
146 # select the right disklabel program
164 # use the new build infrastructure to create libraries
165 # and also to build a specific target
166 create_includes_and_libraries2() { # opt_dir opt_target
168 log "create_includes_and_libraries2() for ${SRC}"
169 if [ ${OSVERSION} -ge 600000 ] ; then
170 no="-DNO_CLEAN -DNO_PROFILE -DNO_GAMES -DNO_LIBC_R"
172 no="-DNOCLEAN -DNOPROFILE -DNOGAMES -DNOLIBC_R"
174 MAKEOBJDIRPREFIX=${l_objtree}
175 export MAKEOBJDIRPREFIX
177 # make -DNOCLEAN -DNOPROFILE -DNOGAMES -DNOLIBC_R -DPICOBSD buildworld
178 if [ -d "$1" ] ; then
179 cd $1 ; make $2 # specific target, e.g. ld-elf.so
181 make _+_= $no toolchain _includes _libraries
186 # entry for 4.x and earlier trees
187 create_includes_and_libraries() {
190 log "create_includes_and_libraries() for ${SRC}"
191 # Optionally creates include directory and libraries.
192 mkdir -p ${l_usrtree}/include # the include directory...
193 mkdir -p ${l_usrtree}/share/misc # a few things go here
194 mkdir -p ${l_usrtree}/lib # libraries
195 mkdir -p ${l_usrtree}/sbin # some binaries
196 # override variables for ownershiip and destinations
197 # BINOWN:BINGRP are also used for include files
199 BINOWN=`id -un` BINGRP=`id -gn` \
200 DESTDIR=${l_usrtree}/.. \
201 make -m ${SRC}/share/mk includes ) || fail $? includes
202 # Pick up the correct headers for libraries.
203 CFLAGS="-nostdinc -I${l_usrtree}/include" ; export CFLAGS
206 # $e is the invocation of make with correct environment
207 # XXX check the NO* options below, maybe system dependent.
208 e="MAKEOBJDIRPREFIX=${l_objtree}/picobsd/libraries \
209 BINOWN=`id -un` BINGRP=`id -gn` \
210 DESTDIR=${l_usrtree}/.. \
211 make -m ${SRC}/share/mk \
212 -DNOHTML -DNOINFO -DNOMAN -DNOSHARE -DNOFSCHG "
213 log "do a 'make obj' in a few places."
214 # This is very version-specific... The following works for 5.0
215 for i in lib secure/lib gnu/lib \
216 gnu/usr.bin/perl usr.bin/lex usr.sbin/config ; do
217 (cd ${i}; eval $e obj)
219 log "now make the static libraries"
220 eval $e -DNOPROFILE -DNOPIC libraries
221 (cd ${SRC}/usr.sbin/config
222 eval $e # build binary
223 eval $e install # install it
225 ) || fail $? "libraries"
229 # set_type <the_type> [the_site] looks in user or system directories
230 # for the directory named as the first argument, reads the configuration
231 # files and sets variables according to the config.
232 # Also sets MY_TREE and BUILDDIR and SITE
234 set_type() { # the_type the_site
237 log "set_type() : Type '$1' site '$2'"
241 name="" # clear in case of errors
242 for i in ${c_startdir}/${a} ${PICO_TREE}/${a} ; do
243 log "set_type: checking $i"
244 [ -d $i -a -f $i/PICOBSD -a -f $i/crunch.conf ] || continue
245 set -- `cat $i/PICOBSD | \
246 awk '/^#PicoBSD/ {print $2, $3, $4, $5, $6}'`
247 [ x"$1" != "x" ] || continue
248 MFS_SIZE=$1 ; init_name=$2
249 mfs_inodes=$3 ; fd_inodes=$4
250 name=`(cd $i ; pwd) `
251 name=`basename $name`
253 BUILDDIR=${c_startdir}/build_dir-${name}
254 log "Matching file $name in $i"
257 logverbose "Type $a NOT FOUND"
262 if [ -z "${name}" ] ; then
263 echo "---> Wrong floppy type"
269 # prepare a message to be printed in the dialog menus.
273 MSG1="Type: ${THETYPE} name $name"
275 MSG="PicoBSD build -- Current parameters:\n\n\t1. ${MSG1}\n\
276 \t2. MFS size: ${MFS_SIZE} kB\n\
277 \t3. Site-info: ${SITE}\n\t4. Full-path: ${MY_TREE}\n"
280 # Main build procedure. Builds both the disk image and the ISO
282 log "build_image() <${name}>"
283 [ -n "${name}" ] || fail $? bad_type
286 printf "${MSG}---> We'll use the sources living in ${SRC}\n\n"
288 # read config variables from a global and then a type-specific file
289 # basically STAND_LINKS and MY_DEVS, but can also override other
292 . ${PICO_TREE}/build/config
293 [ -f "${MY_TREE}/config" ] && . ${MY_TREE}/config
294 [ -f "${o_additional_config}" ] && . ${o_additional_config}
296 # location of the object directory
297 PICO_OBJ=${l_objtree}/picobsd/${THETYPE}
298 log "PICO_OBJ is ${PICO_OBJ}"
300 if [ ${OSVERSION} -ge 500035 ] ; then
301 export MAKEOBJDIRPREFIX=${l_objtree}
302 eval "export BINMAKE=\"`cd ${SRC}; make -f Makefile -V BINMAKE`\""
303 eval export `cd ${SRC}; ${BINMAKE} -f Makefile.inc1 -V WMAKEENV`
305 # create build directory and subtree
306 mkdir -p ${BUILDDIR}/crunch
307 # remove any old stuff
308 rm -f ${BUILDDIR}/kernel.gz ${BUILDDIR}/${c_fs}
309 # invoke commands to build a kernel
311 # fill a subdirectory with things that go into the floppy
312 # (mostly /etc and similar stuff)
314 # populate it and produce a file with the MFS image
315 populate_mfs_tree # things which go into mfs
316 # create, mount and fill a filesystem with floppy image
317 fill_floppy_image # copies everything into the floppy
320 # Set build parameters interactively
329 dialog --menu "PicoBSD build menu -- (29 sep 2001)" 19 70 12 \
330 N "--> READY, build it <---" \
332 K "edit Kernel config file" \
333 E "Edit crunch.conf file" \
334 S "MFS Size: ${MFS_SIZE}kB" \
335 I "Init type: ${init_name}" \
336 F "Floppy size: ${fd_size}kB" \
337 M "MFS bytes per inode: ${mfs_inodes}" \
338 U "UFS bytes per inode: ${fd_inodes}" \
339 $ "Site-info: ${SITE}" \
347 for i in ${c_startdir} ${c_startdir}/* ${PICO_TREE}/* ; do
348 if [ -d $i -a -f $i/PICOBSD -a -f $i/crunch.conf ]; then
349 l="$l `basename $i` `basename $i`"
353 { dialog --menu "Setup the type of configuration" 12 70 5 $l \
354 2> ${c_reply} && set_type "`cat ${c_reply}`" ${SITE} ; } || true
357 { dialog --menu "Choose your init(8) program" \
358 10 70 2 init "Standard init (requires getty)" \
359 oinit "small init from TinyWare" 2> ${c_reply} \
360 && init_name=`cat ${c_reply}` ; } || true
363 K) ${EDITOR} ${MY_TREE}/PICOBSD ;;
365 E) ${EDITOR} ${MY_TREE}/crunch.conf ;;
368 { dialog --title "MFS Size setup" --inputbox \
369 "MFS size depends on what you need to put on the MFS image. Typically \
370 ranges between 820kB (for very small bridge/router images) to \
371 as much as 2500kB kB for a densely packed image. \
372 Keep in mind that this memory is \
373 totally lost to other programs. Usually you want to keep \
374 this as small as possible. " 10 70 2> ${c_reply} \
375 && MFS_SIZE=`cat ${c_reply}` ; } || true
379 { dialog --title "Site info setup" --inputbox \
380 "Please enter the full path to the directory \
381 containing site-specific setup. \
382 This directory tree must contain files that replace \
383 standard ones in floppy.tree/ and mfs.tree/ . " \
384 10 70 2> ${c_reply} && SITE=`cat ${c_reply}` ; } || true
388 { dialog --menu "Set floppy size" 15 70 4 \
389 1440 "1.44MB" 1720 "1.72MB" 2880 "2.88MB" 4096 "4MB" \
390 2> ${c_reply} && fd_size=`cat ${c_reply}` ; } || true
394 { dialog --title "MFS bytes per inode:" --inputbox \
395 "Enter MFS bytes per inode (typically 4096..65536). \
396 A larger value means fewer inodes but more space on MFS" \
397 10 70 2> ${c_reply} && mfs_inodes=`cat ${c_reply}` ; } || true
401 { dialog --title "Floppy bytes per inode:" --inputbox \
402 "Enter floppy bytes per inode (typically 3072..65536). \
403 A larger value means fewer inodes but more space on the floppy." \
404 10 70 2> ${c_reply} && fd_inodes=`cat ${c_reply}` ; } || true
412 *) echo "
\aUnknown option \"${ans}\". Try again."
420 # Call the build procedure
425 if [ "${o_interactive}" = "NO" ] ; then
426 echo "+++ Build completed +++"
427 cat .build.reply || true
430 dialog --title "Build ${THETYPE} completed" --inputbox \
431 "\nThe build process was completed successfuly.\n\
432 `cat .build.reply` \n\n\
433 Now we are going to install the image on the floppy.\n\
434 Please insert a blank floppy in /dev/fd0.\\n
435 WARNING: the contents of the floppy will be permanently erased!\n\
438 * ^C or [Cancel] to abort,\n\
439 * Enter to install ${c_img},\n\
440 " 20 80 2> ${c_reply}
441 if [ "$?" = "0" ]; then
442 echo "Writing ${c_img}..."
443 dd if=${BUILDDIR}/${c_img} of=/dev/fd0.${fd_size}
445 echo "Ok, the image is in ${c_img}"
451 #-------------------------------------------------------------------
453 # invoke the picobsd Makefile to compile the kernel.
454 # if MODULES is set (value is irrelevant) the makefile will build modules.
456 log "do_kernel() Preparing kernel \"$name\" in $MY_TREE"
457 (cd $MY_TREE; export name SRC BUILDDIR # used in this makefile ;
459 [ "${o_do_modules}" = "yes" ] && export MODULES=""
460 ${BINMAKE} -v -f ${PICO_TREE}/build/Makefile.conf ) || \
461 fail $? missing_kernel
464 # Populate the variable part of the floppy filesystem. Must be done before
465 # the MFS because its content might need to be copied there as well.
467 # This involves fetching files from three subtrees, in this order:
469 # 1. a standard one, from which type-specific files are excluded;
470 # 2. a type-specific one;
471 # 3. a site-specific one.
473 # Files are first copied to a local tree and then compressed.
475 populate_floppy_fs() { # OK
476 local dst excl srcdir
478 log "populate_floppy_fs()"
479 dst=${BUILDDIR}/floppy.tree
480 log "pwd=`pwd` Populating floppy filesystem..."
482 rm -rf ${dst} || true # clean relics from old compilations.
483 mkdir ${dst} # create a clean tree
485 # compute exclude list for generic tree
486 excl=${MY_TREE}/floppy.tree.exclude
487 if [ -f ${excl} ] ; then
488 log "Files excluded from generic tree: `echo;cat ${excl}`"
489 excl="--exclude-from ${excl}"
493 # copy from the floppy trees into the destination
494 for FLOPPY_TREE in ${PICO_TREE}/floppy.tree ${MY_TREE}/floppy.tree \
495 ${MY_TREE}/floppy.tree.${SITE} ; do
496 if [ -d ${FLOPPY_TREE} ] ; then
497 (cd ${FLOPPY_TREE} ; tar -cf - --exclude CVS \
498 --exclude .svn ${excl} . ) | \
499 (cd ${dst} ; tar x${o_tarv}f - )
500 log "Copied from ${FLOPPY_TREE}"
502 excl="" # reset the exclude list.
505 # add local manipulation
506 if [ -f ${MY_TREE}/buildtree.mk ] ; then
507 log "building local floppy tree"
508 ${BINMAKE} -C ${dst} -f ${MY_TREE}/buildtree.mk floppy.tree
511 # compress the files in etc/, just in case
512 # XXX this should be done in the makefile.
513 # gzip returns an error if it fails to compress some file
514 (cd $dst ; gzip -9 etc/*
515 log "Compressed files in etc/ `echo; ls -l etc`"
519 # Copy the specified files to the destination filesystem.
520 # Each file is specified as a pair "src dst", dst is assumed to be
521 # a directory (and created with mkdir -p) if it has a trailing /
522 # Be careful to escape metacharacters.
523 # You can use ${CROSS} to point to the root of the cross build
524 # (remember that it might be incomplete)
526 do_copyfiles() { # rootdir varname
530 local CROSS=${_SHLIBDIRPREFIX}
534 [ -z "$srcs" ] && srcs=$dst && continue
535 eval srcs="$srcs" # expand wildcard and vars
537 */ ) mkdir -p ${root}/${dst} ;;
538 # * ) mkdir -p `dirname ${root}/${dst}` ;;
540 cp -p ${srcs} ${root}/${dst} || true
545 # do_links is a helper function to create links between programs
547 # This is done reading the names and destination from variable
548 # links in a config file, in the format
551 do_links() { # rootdir varname
556 log "Create links for ${l}"
559 if [ "$dst" = ":" -o "$i" = ":" ] ; then
561 elif [ -n "${dst}" ] ; then
568 # find_progs is a helper function to locate the named programs
569 # or libraries in ${o_objdir} or ${_SHLIBDIRPREFIX},
570 # and return the full pathnames.
571 # Sets ${u_progs} to the list of programs, and ${u_libs}
572 # to the list of shared libraries used.
574 # You can use it e.g. in a local configuration file by writing
576 # do_copyfiles_user() {
578 # find_progs nvi sed less grep
579 # cp -p ${u_progs} ${dst}/bin
580 # cp -p ${u_libs} ${dst}/lib
581 # mkdir -p ${dst}/libexec
582 # find_progs ld-elf.so.1
583 # cp -p ${u_progs} ${dst}/libexec
586 find_progs() { # programs
588 u_progs="`find_progs_helper $*`"
589 local o=${o_objdir:-${_SHLIBDIRPREFIX}}
590 [ -z "${u_progs}" ] && return 1 # not found, error
591 i="`ldd ${u_progs} | grep -v '^/' | awk '{print $1}' | sort | uniq`"
592 u_libs="`find_progs_helper $i`"
596 find_progs_helper() { # programs
598 local i o places names
599 local subdirs="bin sbin usr.bin usr.sbin libexec lib \
600 gnu/usr.bin gnu/lib \
601 secure/usr.bin secure/usr.sbin secure/libexec secure/lib"
602 names="" # files to search
605 # plain programs come out verbatim
606 [ -f "$i" ] && echo $i && continue
607 names="${names} ${o} -name $i"
610 [ -z "${names}" ] && return 0
611 places="" # places to search
612 o=${o_objdir:-${_SHLIBDIRPREFIX}/..}
613 for i in $subdirs ; do
614 [ -d "${o}/${i}" ] && places="${places} ${o}/${i}"
616 find ${places} -type f \( ${names} \)
619 # Populate the memory filesystem with binaries and non-variable
620 # configuration files.
621 # First do an mtree pass, then create directory links and device entries,
622 # then run crunchgen etc. to build the binary and create links.
623 # Then copy the specific/generic mfs_tree.
624 # Finally, if required, make a copy of the floppy.tree onto /fd
626 populate_mfs_tree() {
627 local i j a dst MFS_TREE
629 log "populate_mfs_tree()"
630 dst=${BUILDDIR}/mfs.tree
631 rm -rf ${dst} || true # clean relics from old compilations.
632 mkdir ${dst} # create a fresh tree
634 log "pwd=`pwd`, Populating MFS tree..."
636 # use type-specific mfs.mtree, default to generic one.
637 a=${MY_TREE}/mfs.mtree
638 [ -f ${a} ] || a=${PICO_TREE}/build/mfs.mtree
639 log "Running mtree using $a..."
640 mtree -deU -f $a -p ${dst} > /dev/null || fail $? mtree
642 # Create symlinks using relative pathnames, so it is possible
643 # to follow them also when building the image.
644 # Note that names in STAND_LINKS should not have a leading /
645 for i in ${STAND_LINKS}; do
646 j=`echo $i | sed -E 's:^[^/]+::;s:/[^/]+:../:g'`
647 ln -s ${j}stand ${dst}/$i
649 ln -s ../../dev/null ${dst}/var/run/log
650 ln -s ../../../etc/termcap ${dst}/usr/share/misc/termcap
652 ### now build the crunched binaries ###
654 cd ${BUILDDIR}/crunch
655 log "Making and installing crunch1 from `pwd` src ${SRC}..."
656 a=${BUILDDIR}/crunch1.conf
657 ( export BUILDDIR SRC MY_TREE PICO_OBJ ;
659 -v -f ${PICO_TREE}/build/Makefile.conf ${BUILDDIR}/crunch.mk )
660 log "Libs are ${LIBS} "
661 export SRC # used by crunch.mk
663 log "Now make -f crunch.mk"
664 ${BINMAKE} ${o_makeopts} -f ${BUILDDIR}/crunch.mk
665 strip --remove-section=.note --remove-section=.comment crunch1
666 mv crunch1 ${dst}/stand/crunch
667 chmod 555 ${dst}/stand/crunch
668 log "Making links for binaries..."
669 for i in `crunchgen -l $a` ; do
670 ln ${dst}/stand/crunch ${dst}/stand/${i};
672 # rm $a # do not remove!
675 if [ -f ${dst}/stand/sshd ] ; then
676 log "Setting up host key for sshd:"
677 if [ -f ${BUILDDIR}/floppy.tree/etc/ssh_host_key.gz ] ; then
678 log "Using existing host key"
680 log "Generating new host key"
681 ssh-keygen -t rsa1 -f ${BUILDDIR}/floppy.tree/etc/ssh_host_key \
682 -N "" -C "root@picobsd"
683 gzip -9 ${BUILDDIR}/floppy.tree/etc/ssh_host_key* || true
687 log "Copy generic and site-specific MFS tree..."
688 for MFS_TREE in ${PICO_TREE}/mfs_tree ${MY_TREE}/mfs_tree ; do
689 if [ -d ${MFS_TREE} ] ; then
690 log "Copy ${MFS_TREE} ..."
691 (cd ${MFS_TREE} ; tar -cf - --exclude CVS --exclude .svn . ) | \
692 (cd ${dst} ; tar x${o_tarv}f - )
696 if [ -f ${MY_TREE}/buildtree.mk ] ; then
697 log "building local floppy tree"
698 ${BINMAKE} -C ${dst} -f ${MY_TREE}/buildtree.mk mfs.tree
701 if [ "${o_all_in_mfs}" = "yes" ]; then
702 log "Copy generic floppy_tree into MFS..."
703 # ignore failure in case the floppy is empty
704 cp -Rp ${BUILDDIR}/floppy.tree/* ${dst}/fd || true
707 # 4.x compatibility - create device nodes
708 if [ -n "${o_no_devfs}" ] ; then
709 # create device entries using MAKEDEV
711 ln -s ${SRC}/etc/MAKEDEV ; chmod 555 MAKEDEV
713 sh ./MAKEDEV ${MY_DEVS}
717 if [ "`id -u`" = "0" ] ; then
718 log "Fixing permissions"
719 (cd ${dst}; chown -R root . )
722 # If we are building a shared 'crunch', take the libraries
723 # and the dynamic loader as well
724 find_progs ${dst}/stand/crunch
725 if [ -n "${u_libs}" ] ; then
726 mkdir -p ${dst}/lib && cp -p ${u_libs} ${dst}/lib
727 mkdir -p ${dst}/libexec
728 create_includes_and_libraries2 libexec/rtld-elf
729 find_progs ld-elf.so.1 && cp -p ${u_progs} ${dst}/libexec
732 [ -n "${copy_files}" ] && do_copyfiles ${dst} copy_files
733 do_copyfiles_user ${dst} || true
734 [ -n "${links}" ] && do_links ${dst} links
735 strip ${dst}/libexec/* ${dst}/lib/* ${dst}/stand/* 2> /dev/null || true
737 # The 'import_files' mechanism is deprecated, as it requires
738 # root permissions to follow the symlinks, and also does
739 # not let you rename the entries.
740 if [ -n "${import_files}" ] ; then
741 log "importing ${import_files} into mfs"
742 # We do it in a chroot environment on the target so
743 # symlinks are followed correctly.
744 # Make sure we have a statically linked tar there.
745 mkdir -p ${dst}/rescue
746 cp /rescue/tar ${dst}/rescue
747 (cd ${l_usrtree}/.. ; tar cf - ${import_files} ) | \
748 (chroot ${dst} /rescue/tar xPf - )
752 # final step -- build the mfs image
755 echo "/set uid=0 gid=0" > mtree.out
756 mtree -ic -p ${dst} -k "" >> mtree.out
757 log "mtre.out at ${BUILDDIR}/mtree.out"
758 makefs -t ffs -o bsize=4096 -o fsize=512 \
759 -s ${MFS_SIZE}k -f 1000 -F mtree.out ${c_fs} ${dst}
765 log "final_cleanup()"
766 rm -rf ${c_mnt} ${c_reply} 2> /dev/null || true
771 # This function is used to trap errors and print msgs
774 local errno errocode where
779 echo "---> fail: Error <${errno}> error code <${errcode}> in <${where}>"
782 echo "Error while making hierarchy in ${c_mnt}"
785 echo "Error while building ${name}."
788 echo "Error: you must build PICOBSD${suffix} kernel first"
791 echo "Error: failed while making includes"
794 echo "Error: failed while making libraries"
797 echo "Error: unknown floppy type ${name}"
800 echo "Error: no space left on device (${where})"
803 echo "Error: while writing MFS into the kernel."
810 echo "unknown error, maybe user break: $errno $errcode"
813 echo "---> Aborting $0"
814 # try to cleanup the vnode.
819 fill_floppy_image() {
820 local blocks dst mfs_start mfs_end mfs_size img_size
822 log "fill_floppy_image()"
823 dst=${c_mnt} # where to create the image
825 log "Preparing ${fd_size}kB floppy filesystem..."
827 # correct blocks according to size.
829 if [ "${blocks}" = "1720" ]; then
831 elif [ "${blocks}" = "1480" ]; then
835 log "Labeling floppy image"
836 b2=${BUILDDIR}/boot2 # modified boot2
837 cp -f ${c_boot2} ${b2}
840 if [ ${o_use_loader} = "no" ] ; then
841 log "patch ${c_boot2} to boot /kernel right away"
842 set `strings -at d ${b2} | grep "/boot/loader"`
843 echo -e "/kernel\0\0\0\0\0" | \
844 dd of=${b2} obs=$1 oseek=1 conv=notrunc 2>/dev/null
848 dst=${BUILDDIR}/image.tree
853 set 0 0 # reset variables
854 # $1 takes the offset of the MFS filesystem
855 set `strings -at d kernel | grep "MFS Filesystem goes here"`
857 set 0 0 # reset variables
858 set `strings -at d kernel | grep "MFS Filesystem had better"`
860 mfs_size="$((${mfs_end} - ${mfs_start}))"
861 set -- `ls -l ${c_fs}`; imgsize="$5"
862 if [ ${mfs_start} -gt 0 -a ${mfs_size} -ge ${imgsize} ] ; then
863 mfs_ofs=$((${mfs_start} + 8192))
864 log "Preload kernel with file ${c_fs} at ${mfs_ofs}"
865 logverbose "`ls -l ${c_fs}` to fit in ${mfs_size}"
866 dd if=${c_fs} ibs=8192 iseek=1 of=kernel obs=${mfs_ofs} \
867 oseek=1 conv=notrunc # 2> /dev/null
869 log "not loading mfs, size ${mfs_size} img ${imgsize}"
871 log "Compress with kgzip and copy to floppy image"
872 if [ ${o_use_loader} = "no" ] ; then
873 kgzip -o kernel.gz kernel
874 cp -p kernel.gz ${dst}/kernel || fail $? no_space "copying kernel"
877 mkdir -p ${dst}/boot/kernel
878 echo "hint.acpi.0.disabled=\"1\"" > ${dst}/boot/loader.conf
879 echo "console=\"comconsole\"" >> ${dst}/boot/loader.conf
880 cp -p /boot/loader ${dst}/boot/loader || fail $? no_space "copying bootloader"
881 cp -p kernel.gz ${dst}/boot/kernel/kernel.gz || fail $? no_space "copying kernel"
884 # now transfer the floppy tree. If it is already in mfs, dont bother.
885 if [ "${o_all_in_mfs}" != "yes" ] ; then
886 log "Now transfer floppy tree if not already in MFS image"
887 cp -Rp floppy.tree/* ${dst} || \
888 fail $? no_space "copying floppy tree"
892 # add local manipulation to the image
893 if [ -f ${MY_TREE}/buildtree.mk ] ; then
894 ${BINMAKE} -C ${dst} -f ${MY_TREE}/buildtree.mk image.tree
897 log "image used `du -s ${dst}` of ${blocks}k"
898 if [ "${generate_iso}" = "YES" ]; then
899 logverbose "generate_iso ${generate_iso}"
900 # build_iso_image # XXX not implemented yet
902 cp -p /boot/cdboot ${dst}/boot || fail $? no_space "copying cdboot"
903 mkisofs -b boot/cdboot -no-emul-boot -J -r -ldots -l -L \
909 makefs -t ffs -o bsize=4096 -o fsize=512 \
910 -s ${blocks}k -f 50 ${c_img} ${dst}
912 ${c_label} -w -f `pwd`/${c_img} auto # write in a label
913 # copy partition c: into a: with some sed magic
914 ${c_label} -f `pwd`/${c_img} | sed -e '/ c:/{p;s/c:/a:/;}' | \
915 ${c_label} -R -f `pwd`/${c_img} /dev/stdin
916 ${c_label} -f `pwd`/${c_img}
919 ${c_label} -f `pwd`/${c_img}
920 logverbose "after disklabel"
923 echo "BUILDDIR ${BUILDDIR}"
925 # dump the primary and secondary boot
926 # XXX primary is 512 bytes
927 dd if=${c_boot1} of=${BUILDDIR}/${c_img} conv=notrunc 2>/dev/null
928 # XXX secondary starts after the 0x114 = dec 276 bytes of the label
929 # so we skip 276 from the source, and 276+512=788 from dst
930 # the old style blocks used 512 and 1024 respectively
932 dd if=${b2} iseek=1 ibs=276 2> /dev/null | \
933 dd of=${BUILDDIR}/${c_img} oseek=1 obs=788 conv=notrunc 2>/dev/null
934 logverbose "done floppy image"
935 # XXX (log "Fixing permissions"; cd ${dst}; chown -R root *)
936 rm -rf ${BUILDDIR}/floppy.tree || true # cleanup
937 # df -ik ${dst} | colrm 70 > .build.reply
939 rm ${BUILDDIR}/${c_fs}
940 # rm ${BUILDDIR}/kernel.gz
943 # This function creates variables which depend on the source tree in use:
944 # SRC, l_usrtree, l_objtree
945 # Optionally creates libraries, includes and the like (for cross compiles,
946 # needs to be done once).
948 set_build_parameters() {
949 if [ "${SRC}" = "/usr/src" ] ; then
950 l_usrtree=${USR:-/usr}
952 l_usrtree=${USR:-${SRC}/../usr}
954 l_objtree=${l_usrtree}/obj-pico
955 PICO_TREE=${PICO_TREE:-${SRC}/release/picobsd}
956 set `grep "#define[\t ]__FreeBSD_version" ${SRC}/sys/sys/param.h`
958 log "OSVERSION is ${OSVERSION}"
959 if [ "${o_init_src}" != "" ] ; then
960 if [ ${OSVERSION} -lt 500035 ] ; then
961 create_includes_and_libraries
963 create_includes_and_libraries2
966 if [ ${OSVERSION} -lt 500035 ] ; then
967 # Create the right LIBS and CFLAGS for further builds.
968 # and build the config program
969 LIBS="-L${l_usrtree}/lib"
970 CFLAGS="-nostdinc -I${l_usrtree}/include"
972 CONFIG=${l_usrtree}/sbin/config
976 # if we have o_objdir, find where bin/ is
977 if [ ! -z "${o_objdir}" ] ; then
978 if [ -d ${o_objdir}/bin ] ; then
980 elif [ -d "${o_objdir}${SRC}/bin" ] ; then
981 o_objdir="${o_objdir}${SRC}"
982 log "Changing objdir to ${o_objdir}"
984 log "Cannot find objdir in ${o_objdir}, sorry"
990 #-------------------------------------------------------------------
991 # Main entry of the script. Initialize variables, parse command line
998 --src) # set the source path instead of /usr/src
1011 --no_loader) # omit /boot/loader, just rely on boot2
1012 # (it may have problems with kernels > 4MB)
1024 --modules) # also build kernel modules
1031 -clear|-clean|-c) # clean
1036 -v) # need -v -v to wait for user input
1037 o_verbose=$((${o_verbose}+1)) # verbose level
1038 o_tarv="v" # tar verbose flag
1039 o_makeopts="-d l" # be verbose
1042 --iso) # generate iso image
1046 --cfg) # read additional config from this file
1047 o_additional_config=`realpath $2`
1051 --objdir) # Place with results of a previous buildworld
1052 # useful if you want to copy shared binaries and libs
1053 o_objdir=`realpath $2`
1065 set_build_parameters # things that depend on ${SRC}
1066 set_type $1 $2 # type and site, respectively
1068 [ "${o_interactive}" != "NO" ] && main_dialog
1070 if [ "${o_clean}" = "YES" ] ; then