sys/dev/aic7xxx/aicasm/aicasm.c

   1 /*-
   2  * Aic7xxx SCSI host adapter firmware asssembler
   3  *
   4  * Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs.
   5  * Copyright (c) 2001, 2002 Adaptec Inc.
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions, and the following disclaimer,
  13  *    without modification.
  14  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  15  *    substantially similar to the "NO WARRANTY" disclaimer below
  16  *    ("Disclaimer") and any redistribution must be conditioned upon
  17  *    including a substantially similar Disclaimer requirement for further
  18  *    binary redistribution.
  19  * 3. Neither the names of the above-listed copyright holders nor the names
  20  *    of any contributors may be used to endorse or promote products derived
  21  *    from this software without specific prior written permission.
  22  *
  23  * Alternatively, this software may be distributed under the terms of the
  24  * GNU General Public License ("GPL") version 2 as published by the Free
  25  * Software Foundation.
  26  *
  27  * NO WARRANTY
  28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  30  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  31  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  32  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  34  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  35  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  36  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  37  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  38  * POSSIBILITY OF SUCH DAMAGES.
  39  *
  40  * $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
  41  *
  42  * $FreeBSD$
  43  */
  44 #include <sys/types.h>
  45 #include <sys/mman.h>
  46
  47 #include <ctype.h>
  48 #include <inttypes.h>
  49 #include <regex.h>
  50 #include <stdio.h>
  51 #include <stdlib.h>
  52 #include <string.h>
  53 #include <sysexits.h>
  54 #include <unistd.h>
  55
  56 #if linux
  57 #include <endian.h>
  58 #else
  59 #include <machine/endian.h>
  60 #endif
  61
  62 #include "aicasm.h"
  63 #include "aicasm_symbol.h"
  64 #include "aicasm_insformat.h"
  65
  66 typedef struct patch {
  67         STAILQ_ENTRY(patch) links;
  68         int             patch_func;
  69         u_int           begin;
  70         u_int           skip_instr;
  71         u_int           skip_patch;
  72 } patch_t;
  73
  74 STAILQ_HEAD(patch_list, patch) patches;
  75
  76 static void usage(void);
  77 static void back_patch(void);
  78 static void output_code(void);
  79 static void output_listing(char *ifilename);
  80 static void dump_scope(scope_t *scope);
  81 static void emit_patch(scope_t *scope, int patch);
  82 static int check_patch(patch_t **start_patch, unsigned int start_instr,
  83                        unsigned int *skip_addr, int *func_vals);
  84
  85 struct path_list search_path;
  86 int includes_search_curdir;
  87 char *appname;
  88 char *stock_include_file;
  89 FILE *ofile;
  90 char *ofilename;
  91 char *regfilename;
  92 FILE *regfile;
  93 char *listfilename;
  94 FILE *listfile;
  95 char *regdiagfilename;
  96 FILE *regdiagfile;
  97 int   src_mode;
  98 int   dst_mode;
  99
 100 static STAILQ_HEAD(,instruction) seq_program;
 101 struct cs_tailq cs_tailq;
 102 struct scope_list scope_stack;
 103 symlist_t patch_functions;
 104
 105 #if DEBUG
 106 extern int yy_flex_debug;
 107 extern int mm_flex_debug;
 108 extern int yydebug;
 109 extern int mmdebug;
 110 #endif
 111 extern FILE *yyin;
 112 extern int yyparse(void);
 113
 114 int main(int argc, char *argv[]);
 115
 116 int
 117 main(int argc, char *argv[])
 118 {
 119         int  ch;
 120         int  retval;
 121         char *inputfilename;
 122         scope_t *sentinal;
 123
 124         STAILQ_INIT(&patches);
 125         SLIST_INIT(&search_path);
 126         STAILQ_INIT(&seq_program);
 127         TAILQ_INIT(&cs_tailq);
 128         SLIST_INIT(&scope_stack);
 129
 130         /* Set Sentinal scope node */
 131         sentinal = scope_alloc();
 132         sentinal->type = SCOPE_ROOT;
 133
 134         includes_search_curdir = 1;
 135         appname = *argv;
 136         regfile = NULL;
 137         listfile = NULL;
 138 #if DEBUG
 139         yy_flex_debug = 0;
 140         mm_flex_debug = 0;
 141         yydebug = 0;
 142         mmdebug = 0;
 143 #endif
 144         while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:X")) != -1) {
 145                 switch(ch) {
 146                 case 'd':
 147 #if DEBUG
 148                         if (strcmp(optarg, "s") == 0) {
 149                                 yy_flex_debug = 1;
 150                                 mm_flex_debug = 1;
 151                         } else if (strcmp(optarg, "p") == 0) {
 152                                 yydebug = 1;
 153                                 mmdebug = 1;
 154                         } else {
 155                                 fprintf(stderr, "%s: -d Requires either an "
 156                                         "'s' or 'p' argument\n", appname);
 157                                 usage();
 158                         }
 159 #else
 160                         stop("-d: Assembler not built with debugging "
 161                              "information", EX_SOFTWARE);
 162 #endif
 163                         break;
 164                 case 'i':
 165                         stock_include_file = optarg;
 166                         break;
 167                 case 'l':
 168                         /* Create a program listing */
 169                         if ((listfile = fopen(optarg, "w")) == NULL) {
 170                                 perror(optarg);
 171                                 stop(NULL, EX_CANTCREAT);
 172                         }
 173                         listfilename = optarg;
 174                         break;
 175                 case 'n':
 176                         /* Don't complain about the -nostdinc directrive */
 177                         if (strcmp(optarg, "ostdinc")) {
 178                                 fprintf(stderr, "%s: Unknown option -%c%s\n",
 179                                         appname, ch, optarg);
 180                                 usage();
 181                                 /* NOTREACHED */
 182                         }
 183                         break;
 184                 case 'o':
 185                         if ((ofile = fopen(optarg, "w")) == NULL) {
 186                                 perror(optarg);
 187                                 stop(NULL, EX_CANTCREAT);
 188                         }
 189                         ofilename = optarg;
 190                         break;
 191                 case 'p':
 192                         /* Create Register Diagnostic "printing" Functions */
 193                         if ((regdiagfile = fopen(optarg, "w")) == NULL) {
 194                                 perror(optarg);
 195                                 stop(NULL, EX_CANTCREAT);
 196                         }
 197                         regdiagfilename = optarg;
 198                         break;
 199                 case 'r':
 200                         if ((regfile = fopen(optarg, "w")) == NULL) {
 201                                 perror(optarg);
 202                                 stop(NULL, EX_CANTCREAT);
 203                         }
 204                         regfilename = optarg;
 205                         break;
 206                 case 'I':
 207                 {
 208                         path_entry_t include_dir;
 209
 210                         if (strcmp(optarg, "-") == 0) {
 211                                 if (includes_search_curdir == 0) {
 212                                         fprintf(stderr, "%s: Warning - '-I-' "
 213                                                         "specified multiple "
 214                                                         "times\n", appname);
 215                                 }
 216                                 includes_search_curdir = 0;
 217                                 for (include_dir = SLIST_FIRST(&search_path);
 218                                      include_dir != NULL;
 219                                      include_dir = SLIST_NEXT(include_dir,
 220                                                               links))
 221                                         /*
 222                                          * All entries before a '-I-' only
 223                                          * apply to includes specified with
 224                                          * quotes instead of "<>".
 225                                          */
 226                                         include_dir->quoted_includes_only = 1;
 227                         } else {
 228                                 include_dir =
 229                                     (path_entry_t)malloc(sizeof(*include_dir));
 230                                 if (include_dir == NULL) {
 231                                         perror(optarg);
 232                                         stop(NULL, EX_OSERR);
 233                                 }
 234                                 include_dir->directory = strdup(optarg);
 235                                 if (include_dir->directory == NULL) {
 236                                         perror(optarg);
 237                                         stop(NULL, EX_OSERR);
 238                                 }
 239                                 include_dir->quoted_includes_only = 0;
 240                                 SLIST_INSERT_HEAD(&search_path, include_dir,
 241                                                   links);
 242                         }
 243                         break;
 244                 }
 245                 case 'X':
 246                         /* icc version of -nostdinc */
 247                         break;
 248                 case '?':
 249                 default:
 250                         usage();
 251                         /* NOTREACHED */
 252                 }
 253         }
 254         argc -= optind;
 255         argv += optind;
 256
 257         if (argc != 1) {
 258                 fprintf(stderr, "%s: No input file specifiled\n", appname);
 259                 usage();
 260                 /* NOTREACHED */
 261         }
 262
 263         if (regdiagfile != NULL
 264          && (regfile == NULL || stock_include_file == NULL)) {
 265                 fprintf(stderr,
 266                         "%s: The -p option requires the -r and -i options.\n",
 267                         appname);
 268                 usage();
 269                 /* NOTREACHED */
 270         }
 271         symtable_open();
 272         inputfilename = *argv;
 273         include_file(*argv, SOURCE_FILE);
 274         retval = yyparse();
 275         if (retval == 0) {
 276                 if (SLIST_FIRST(&scope_stack) == NULL
 277                  || SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) {
 278                         stop("Unterminated conditional expression", EX_DATAERR);
 279                         /* NOTREACHED */
 280                 }
 281
 282                 /* Process outmost scope */
 283                 process_scope(SLIST_FIRST(&scope_stack));
 284                 /*
 285                  * Decend the tree of scopes and insert/emit
 286                  * patches as appropriate.  We perform a depth first
 287                  * tranversal, recursively handling each scope.
 288                  */
 289                 /* start at the root scope */
 290                 dump_scope(SLIST_FIRST(&scope_stack));
 291
 292                 /* Patch up forward jump addresses */
 293                 back_patch();
 294
 295                 if (ofile != NULL)
 296                         output_code();
 297                 if (regfile != NULL)
 298                         symtable_dump(regfile, regdiagfile);
 299                 if (listfile != NULL)
 300                         output_listing(inputfilename);
 301         }
 302
 303         stop(NULL, 0);
 304         /* NOTREACHED */
 305         return (0);
 306 }
 307
 308 static void
 309 usage()
 310 {
 311
 312         (void)fprintf(stderr,
 313 "usage: %-16s [-nostdinc|-X] [-I-] [-I directory] [-o output_file]\n"
 314 "       [-r register_output_file [-p register_diag_file -i includefile]]\n"
 315 "       [-l program_list_file]\n"
 316 "       input_file\n", appname);
 317         exit(EX_USAGE);
 318 }
 319
 320 static void
 321 back_patch()
 322 {
 323         struct instruction *cur_instr;
 324
 325         for (cur_instr = STAILQ_FIRST(&seq_program);
 326              cur_instr != NULL;
 327              cur_instr = STAILQ_NEXT(cur_instr, links)) {
 328                 if (cur_instr->patch_label != NULL) {
 329                         struct ins_format3 *f3_instr;
 330                         u_int address;
 331
 332                         if (cur_instr->patch_label->type != LABEL) {
 333                                 char buf[255];
 334
 335                                 snprintf(buf, sizeof(buf),
 336                                          "Undefined label %s",
 337                                          cur_instr->patch_label->name);
 338                                 stop(buf, EX_DATAERR);
 339                                 /* NOTREACHED */
 340                         }
 341                         f3_instr = &cur_instr->format.format3;
 342                         address = f3_instr->address;
 343                         address += cur_instr->patch_label->info.linfo->address;
 344                         f3_instr->address = address;
 345                 }
 346         }
 347 }
 348
 349 static void
 350 output_code()
 351 {
 352         struct instruction *cur_instr;
 353         patch_t *cur_patch;
 354         critical_section_t *cs;
 355         symbol_node_t *cur_node;
 356         int instrcount;
 357
 358         instrcount = 0;
 359         fprintf(ofile,
 360 "/*\n"
 361 " * DO NOT EDIT - This file is automatically generated\n"
 362 " *              from the following source files:\n"
 363 " *\n"
 364 "%s */\n", versions);
 365
 366         fprintf(ofile, "static uint8_t seqprog[] = {\n");
 367         for (cur_instr = STAILQ_FIRST(&seq_program);
 368              cur_instr != NULL;
 369              cur_instr = STAILQ_NEXT(cur_instr, links)) {
 370
 371                 fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
 372                         cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
 373 #if BYTE_ORDER == LITTLE_ENDIAN
 374                         cur_instr->format.bytes[0],
 375                         cur_instr->format.bytes[1],
 376                         cur_instr->format.bytes[2],
 377                         cur_instr->format.bytes[3]);
 378 #else
 379                         cur_instr->format.bytes[3],
 380                         cur_instr->format.bytes[2],
 381                         cur_instr->format.bytes[1],
 382                         cur_instr->format.bytes[0]);
 383 #endif
 384                 instrcount++;
 385         }
 386         fprintf(ofile, "\n};\n\n");
 387
 388         if (patch_arg_list == NULL)
 389                 stop("Patch argument list not defined",
 390                      EX_DATAERR);
 391
 392         /*
 393          *  Output patch information.  Patch functions first.
 394          */
 395         fprintf(ofile,
 396 "typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list);
 397
 398         for (cur_node = SLIST_FIRST(&patch_functions);
 399              cur_node != NULL;
 400              cur_node = SLIST_NEXT(cur_node,links)) {
 401                 fprintf(ofile,
 402 "static %spatch_func_t %spatch%d_func;\n"
 403 "\n"
 404 "static int\n"
 405 "%spatch%d_func(%s)\n"
 406 "{\n"
 407 "       return (%s);\n"
 408 "}\n\n",
 409                         prefix,
 410                         prefix,
 411                         cur_node->symbol->info.condinfo->func_num,
 412                         prefix,
 413                         cur_node->symbol->info.condinfo->func_num,
 414                         patch_arg_list,
 415                         cur_node->symbol->name);
 416         }
 417
 418         fprintf(ofile,
 419 "static struct patch {\n"
 420 "       %spatch_func_t          *patch_func;\n"
 421 "       uint32_t                 begin          :10,\n"
 422 "                                skip_instr     :10,\n"
 423 "                                skip_patch     :12;\n"
 424 "} patches[] = {\n", prefix);
 425
 426         for (cur_patch = STAILQ_FIRST(&patches);
 427              cur_patch != NULL;
 428              cur_patch = STAILQ_NEXT(cur_patch,links)) {
 429                 fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }",
 430                         cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n",
 431                         prefix,
 432                         cur_patch->patch_func, cur_patch->begin,
 433                         cur_patch->skip_instr, cur_patch->skip_patch);
 434         }
 435
 436         fprintf(ofile, "\n};\n\n");
 437
 438         fprintf(ofile,
 439 "static struct cs {\n"
 440 "       uint16_t        begin;\n"
 441 "       uint16_t        end;\n"
 442 "} critical_sections[] = {\n");
 443
 444         for (cs = TAILQ_FIRST(&cs_tailq);
 445              cs != NULL;
 446              cs = TAILQ_NEXT(cs, links)) {
 447                 fprintf(ofile, "%s\t{ %d, %d }",
 448                         cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n",
 449                         cs->begin_addr, cs->end_addr);
 450         }
 451
 452         fprintf(ofile, "\n};\n\n");
 453
 454         fprintf(ofile,
 455 "static const int num_critical_sections = sizeof(critical_sections)\n"
 456 "                                      / sizeof(*critical_sections);\n");
 457
 458         fprintf(stderr, "%s: %d instructions used\n", appname, instrcount);
 459 }
 460
 461 static void
 462 dump_scope(scope_t *scope)
 463 {
 464         scope_t *cur_scope;
 465
 466         /*
 467          * Emit the first patch for this scope
 468          */
 469         emit_patch(scope, 0);
 470
 471         /*
 472          * Dump each scope within this one.
 473          */
 474         cur_scope = TAILQ_FIRST(&scope->inner_scope);
 475
 476         while (cur_scope != NULL) {
 477
 478                 dump_scope(cur_scope);
 479
 480                 cur_scope = TAILQ_NEXT(cur_scope, scope_links);
 481         }
 482
 483         /*
 484          * Emit the second, closing, patch for this scope
 485          */
 486         emit_patch(scope, 1);
 487 }
 488
 489 void
 490 emit_patch(scope_t *scope, int patch)
 491 {
 492         patch_info_t *pinfo;
 493         patch_t *new_patch;
 494
 495         pinfo = &scope->patches[patch];
 496
 497         if (pinfo->skip_instr == 0)
 498                 /* No-Op patch */
 499                 return;
 500
 501         new_patch = (patch_t *)malloc(sizeof(*new_patch));
 502
 503         if (new_patch == NULL)
 504                 stop("Could not malloc patch structure", EX_OSERR);
 505
 506         memset(new_patch, 0, sizeof(*new_patch));
 507
 508         if (patch == 0) {
 509                 new_patch->patch_func = scope->func_num;
 510                 new_patch->begin = scope->begin_addr;
 511         } else {
 512                 new_patch->patch_func = 0;
 513                 new_patch->begin = scope->end_addr;
 514         }
 515         new_patch->skip_instr = pinfo->skip_instr;
 516         new_patch->skip_patch = pinfo->skip_patch;
 517         STAILQ_INSERT_TAIL(&patches, new_patch, links);
 518 }
 519
 520 void
 521 output_listing(char *ifilename)
 522 {
 523         char buf[1024];
 524         FILE *ifile;
 525         struct instruction *cur_instr;
 526         patch_t *cur_patch;
 527         symbol_node_t *cur_func;
 528         int *func_values;
 529         int instrcount;
 530         int instrptr;
 531         unsigned int line;
 532         int func_count;
 533         int skip_addr;
 534
 535         instrcount = 0;
 536         instrptr = 0;
 537         line = 1;
 538         skip_addr = 0;
 539         if ((ifile = fopen(ifilename, "r")) == NULL) {
 540                 perror(ifilename);
 541                 stop(NULL, EX_DATAERR);
 542         }
 543
 544         /*
 545          * Determine which options to apply to this listing.
 546          */
 547         for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions);
 548             cur_func != NULL;
 549             cur_func = SLIST_NEXT(cur_func, links))
 550                 func_count++;
 551
 552         func_values = NULL;
 553         if (func_count != 0) {
 554                 func_values = (int *)malloc(func_count * sizeof(int));
 555
 556                 if (func_values == NULL)
 557                         stop("Could not malloc", EX_OSERR);
 558
 559                 func_values[0] = 0; /* FALSE func */
 560                 func_count--;
 561
 562                 /*
 563                  * Ask the user to fill in the return values for
 564                  * the rest of the functions.
 565                  */
 566
 567
 568                 for (cur_func = SLIST_FIRST(&patch_functions);
 569                      cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL;
 570                      cur_func = SLIST_NEXT(cur_func, links), func_count--) {
 571                         int input;
 572
 573                         fprintf(stdout, "\n(%s)\n", cur_func->symbol->name);
 574                         fprintf(stdout,
 575                                 "Enter the return value for "
 576                                 "this expression[T/F]:");
 577
 578                         while (1) {
 579
 580                                 input = getchar();
 581                                 input = toupper(input);
 582
 583                                 if (input == 'T') {
 584                                         func_values[func_count] = 1;
 585                                         break;
 586                                 } else if (input == 'F') {
 587                                         func_values[func_count] = 0;
 588                                         break;
 589                                 }
 590                         }
 591                         if (isatty(fileno(stdin)) == 0)
 592                                 putchar(input);
 593                 }
 594                 fprintf(stdout, "\nThanks!\n");
 595         }
 596
 597         /* Now output the listing */
 598         cur_patch = STAILQ_FIRST(&patches);
 599         for (cur_instr = STAILQ_FIRST(&seq_program);
 600              cur_instr != NULL;
 601              cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) {
 602
 603                 if (check_patch(&cur_patch, instrcount,
 604                                 &skip_addr, func_values) == 0) {
 605                         /* Don't count this instruction as it is in a patch
 606                          * that was removed.
 607                          */
 608                         continue;
 609                 }
 610
 611                 while (line < cur_instr->srcline) {
 612                         fgets(buf, sizeof(buf), ifile);
 613                                 fprintf(listfile, "             \t%s", buf);
 614                                 line++;
 615                 }
 616                 fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
 617 #if BYTE_ORDER == LITTLE_ENDIAN
 618                         cur_instr->format.bytes[0],
 619                         cur_instr->format.bytes[1],
 620                         cur_instr->format.bytes[2],
 621                         cur_instr->format.bytes[3]);
 622 #else
 623                         cur_instr->format.bytes[3],
 624                         cur_instr->format.bytes[2],
 625                         cur_instr->format.bytes[1],
 626                         cur_instr->format.bytes[0]);
 627 #endif
 628                 /*
 629                  * Macro expansions can cause several instructions
 630                  * to be output for a single source line.  Only
 631                  * advance the line once in these cases.
 632                  */
 633                 if (line == cur_instr->srcline) {
 634                         fgets(buf, sizeof(buf), ifile);
 635                         fprintf(listfile, "\t%s", buf);
 636                         line++;
 637                 } else {
 638                         fprintf(listfile, "\n");
 639                 }
 640                 instrptr++;
 641         }
 642         /* Dump the remainder of the file */
 643         while(fgets(buf, sizeof(buf), ifile) != NULL)
 644                 fprintf(listfile, "             %s", buf);
 645
 646         fclose(ifile);
 647 }
 648
 649 static int
 650 check_patch(patch_t **start_patch, unsigned int start_instr,
 651             unsigned int *skip_addr, int *func_vals)
 652 {
 653         patch_t *cur_patch;
 654
 655         cur_patch = *start_patch;
 656
 657         while (cur_patch != NULL && start_instr == cur_patch->begin) {
 658                 if (func_vals[cur_patch->patch_func] == 0) {
 659                         int skip;
 660
 661                         /* Start rejecting code */
 662                         *skip_addr = start_instr + cur_patch->skip_instr;
 663                         for (skip = cur_patch->skip_patch;
 664                              skip > 0 && cur_patch != NULL;
 665                              skip--)
 666                                 cur_patch = STAILQ_NEXT(cur_patch, links);
 667                 } else {
 668                         /* Accepted this patch.  Advance to the next
 669                          * one and wait for our intruction pointer to
 670                          * hit this point.
 671                          */
 672                         cur_patch = STAILQ_NEXT(cur_patch, links);
 673                 }
 674         }
 675
 676         *start_patch = cur_patch;
 677         if (start_instr < *skip_addr)
 678                 /* Still skipping */
 679                 return (0);
 680
 681         return (1);
 682 }
 683
 684 /*
 685  * Print out error information if appropriate, and clean up before
 686  * terminating the program.
 687  */
 688 void
 689 stop(const char *string, int err_code)
 690 {
 691         if (string != NULL) {
 692                 fprintf(stderr, "%s: ", appname);
 693                 if (yyfilename != NULL) {
 694                         fprintf(stderr, "Stopped at file %s, line %d - ",
 695                                 yyfilename, yylineno);
 696                 }
 697                 fprintf(stderr, "%s\n", string);
 698         }
 699
 700         if (ofile != NULL) {
 701                 fclose(ofile);
 702                 if (err_code != 0) {
 703                         fprintf(stderr, "%s: Removing %s due to error\n",
 704                                 appname, ofilename);
 705                         unlink(ofilename);
 706                 }
 707         }
 708
 709         if (regfile != NULL) {
 710                 fclose(regfile);
 711                 if (err_code != 0) {
 712                         fprintf(stderr, "%s: Removing %s due to error\n",
 713                                 appname, regfilename);
 714                         unlink(regfilename);
 715                 }
 716         }
 717
 718         if (listfile != NULL) {
 719                 fclose(listfile);
 720                 if (err_code != 0) {
 721                         fprintf(stderr, "%s: Removing %s due to error\n",
 722                                 appname, listfilename);
 723                         unlink(listfilename);
 724                 }
 725         }
 726
 727         symlist_free(&patch_functions);
 728         symtable_close();
 729
 730         exit(err_code);
 731 }
 732
 733 struct instruction *
 734 seq_alloc()
 735 {
 736         struct instruction *new_instr;
 737
 738         new_instr = (struct instruction *)malloc(sizeof(struct instruction));
 739         if (new_instr == NULL)
 740                 stop("Unable to malloc instruction object", EX_SOFTWARE);
 741         memset(new_instr, 0, sizeof(*new_instr));
 742         STAILQ_INSERT_TAIL(&seq_program, new_instr, links);
 743         new_instr->srcline = yylineno;
 744         return new_instr;
 745 }
 746
 747 critical_section_t *
 748 cs_alloc()
 749 {
 750         critical_section_t *new_cs;
 751
 752         new_cs= (critical_section_t *)malloc(sizeof(critical_section_t));
 753         if (new_cs == NULL)
 754                 stop("Unable to malloc critical_section object", EX_SOFTWARE);
 755         memset(new_cs, 0, sizeof(*new_cs));
 756
 757         TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links);
 758         return new_cs;
 759 }
 760
 761 scope_t *
 762 scope_alloc()
 763 {
 764         scope_t *new_scope;
 765
 766         new_scope = (scope_t *)malloc(sizeof(scope_t));
 767         if (new_scope == NULL)
 768                 stop("Unable to malloc scope object", EX_SOFTWARE);
 769         memset(new_scope, 0, sizeof(*new_scope));
 770         TAILQ_INIT(&new_scope->inner_scope);
 771
 772         if (SLIST_FIRST(&scope_stack) != NULL) {
 773                 TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope,
 774                                   new_scope, scope_links);
 775         }
 776         /* This patch is now the current scope */
 777         SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links);
 778         return new_scope;
 779 }
 780
 781 void
 782 process_scope(scope_t *scope)
 783 {
 784         /*
 785          * We are "leaving" this scope.  We should now have
 786          * enough information to process the lists of scopes
 787          * we encapsulate.
 788          */
 789         scope_t *cur_scope;
 790         u_int skip_patch_count;
 791         u_int skip_instr_count;
 792
 793         cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq);
 794         skip_patch_count = 0;
 795         skip_instr_count = 0;
 796         while (cur_scope != NULL) {
 797                 u_int patch0_patch_skip;
 798
 799                 patch0_patch_skip = 0;
 800                 switch (cur_scope->type) {
 801                 case SCOPE_IF:
 802                 case SCOPE_ELSE_IF:
 803                         if (skip_instr_count != 0) {
 804                                 /* Create a tail patch */
 805                                 patch0_patch_skip++;
 806                                 cur_scope->patches[1].skip_patch =
 807                                     skip_patch_count + 1;
 808                                 cur_scope->patches[1].skip_instr =
 809                                     skip_instr_count;
 810                         }
 811
 812                         /* Count Head patch */
 813                         patch0_patch_skip++;
 814
 815                         /* Count any patches contained in our inner scope */
 816                         patch0_patch_skip += cur_scope->inner_scope_patches;
 817
 818                         cur_scope->patches[0].skip_patch = patch0_patch_skip;
 819                         cur_scope->patches[0].skip_instr =
 820                             cur_scope->end_addr - cur_scope->begin_addr;
 821
 822                         skip_instr_count += cur_scope->patches[0].skip_instr;
 823
 824                         skip_patch_count += patch0_patch_skip;
 825                         if (cur_scope->type == SCOPE_IF) {
 826                                 scope->inner_scope_patches += skip_patch_count;
 827                                 skip_patch_count = 0;
 828                                 skip_instr_count = 0;
 829                         }
 830                         break;
 831                 case SCOPE_ELSE:
 832                         /* Count any patches contained in our innter scope */
 833                         skip_patch_count += cur_scope->inner_scope_patches;
 834
 835                         skip_instr_count += cur_scope->end_addr
 836                                           - cur_scope->begin_addr;
 837                         break;
 838                 case SCOPE_ROOT:
 839                         stop("Unexpected scope type encountered", EX_SOFTWARE);
 840                         /* NOTREACHED */
 841                 }
 842
 843                 cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links);
 844         }
 845 }