]> CyberLeo.Net >> Repos - FreeBSD/releng/8.0.git/blob - sys/sparc64/sbus/sbus.c
Adjust to reflect 8.0-RELEASE.
[FreeBSD/releng/8.0.git] / sys / sparc64 / sbus / sbus.c
1 /*-
2  * Copyright (c) 1998 The NetBSD Foundation, Inc.
3  * All rights reserved.
4  *
5  * This code is derived from software contributed to The NetBSD Foundation
6  * by Paul Kranenburg.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. All advertising materials mentioning features or use of this software
17  *    must display the following acknowledgement:
18  *        This product includes software developed by the NetBSD
19  *        Foundation, Inc. and its contributors.
20  * 4. Neither the name of The NetBSD Foundation nor the names of its
21  *    contributors may be used to endorse or promote products derived
22  *    from this software without specific prior written permission.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
25  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
26  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
28  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34  * POSSIBILITY OF SUCH DAMAGE.
35  */
36 /*-
37  * Copyright (c) 1992, 1993
38  *      The Regents of the University of California.  All rights reserved.
39  *
40  * This software was developed by the Computer Systems Engineering group
41  * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
42  * contributed to Berkeley.
43  *
44  * All advertising materials mentioning features or use of this software
45  * must display the following acknowledgement:
46  *      This product includes software developed by the University of
47  *      California, Lawrence Berkeley Laboratory.
48  *
49  * Redistribution and use in source and binary forms, with or without
50  * modification, are permitted provided that the following conditions
51  * are met:
52  * 1. Redistributions of source code must retain the above copyright
53  *    notice, this list of conditions and the following disclaimer.
54  * 2. Redistributions in binary form must reproduce the above copyright
55  *    notice, this list of conditions and the following disclaimer in the
56  *    documentation and/or other materials provided with the distribution.
57  * 4. Neither the name of the University nor the names of its contributors
58  *    may be used to endorse or promote products derived from this software
59  *    without specific prior written permission.
60  *
61  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
62  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
63  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
64  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
65  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
66  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
67  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
68  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
69  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
70  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
71  * SUCH DAMAGE.
72  */
73 /*-
74  * Copyright (c) 1999 Eduardo Horvath
75  * Copyright (c) 2002 by Thomas Moestl <tmm@FreeBSD.org>.
76  * Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
77  * All rights reserved.
78  *
79  * Redistribution and use in source and binary forms, with or without
80  * modification, are permitted provided that the following conditions
81  * are met:
82  * 1. Redistributions of source code must retain the above copyright
83  *    notice, this list of conditions and the following disclaimer.
84  *
85  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR  ``AS IS'' AND
86  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
87  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
88  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR  BE LIABLE
89  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
90  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
91  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
92  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
93  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
94  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
95  * SUCH DAMAGE.
96  *
97  *      from: @(#)sbus.c        8.1 (Berkeley) 6/11/93
98  *      from: NetBSD: sbus.c,v 1.46 2001/10/07 20:30:41 eeh Exp
99  */
100
101 #include <sys/cdefs.h>
102 __FBSDID("$FreeBSD$");
103
104 /*
105  * SBus support.
106  */
107
108 #include <sys/param.h>
109 #include <sys/systm.h>
110 #include <sys/bus.h>
111 #include <sys/kernel.h>
112 #include <sys/malloc.h>
113 #include <sys/module.h>
114 #include <sys/pcpu.h>
115 #include <sys/queue.h>
116 #include <sys/reboot.h>
117 #include <sys/rman.h>
118
119 #include <dev/ofw/ofw_bus.h>
120 #include <dev/ofw/ofw_bus_subr.h>
121 #include <dev/ofw/openfirm.h>
122
123 #include <machine/bus.h>
124 #include <machine/bus_common.h>
125 #include <machine/bus_private.h>
126 #include <machine/iommureg.h>
127 #include <machine/iommuvar.h>
128 #include <machine/resource.h>
129
130 #include <sparc64/sbus/ofw_sbus.h>
131 #include <sparc64/sbus/sbusreg.h>
132 #include <sparc64/sbus/sbusvar.h>
133
134 struct sbus_devinfo {
135         int                     sdi_burstsz;
136         int                     sdi_clockfreq;
137         int                     sdi_slot;
138
139         struct ofw_bus_devinfo  sdi_obdinfo;
140         struct resource_list    sdi_rl;
141 };
142
143 /* Range descriptor, allocated for each sc_range. */
144 struct sbus_rd {
145         bus_addr_t              rd_poffset;
146         bus_addr_t              rd_pend;
147         int                     rd_slot;
148         bus_addr_t              rd_coffset;
149         bus_addr_t              rd_cend;
150         struct rman             rd_rman;
151         bus_space_handle_t      rd_bushandle;
152         struct resource         *rd_res;
153 };
154
155 struct sbus_softc {
156         device_t                sc_dev;
157         bus_dma_tag_t           sc_cdmatag;
158         bus_space_tag_t         sc_cbustag;
159         int                     sc_clockfreq;   /* clock frequency (in Hz) */
160         int                     sc_nrange;
161         struct sbus_rd          *sc_rd;
162         int                     sc_burst;       /* burst transfer sizes supp. */
163
164         struct resource         *sc_sysio_res;
165         int                     sc_ign;         /* IGN for this sysio */
166         struct iommu_state      sc_is;          /* IOMMU state (iommuvar.h) */
167
168         struct resource         *sc_ot_ires;
169         void                    *sc_ot_ihand;
170         struct resource         *sc_pf_ires;
171         void                    *sc_pf_ihand;
172 };
173
174 #define SYSIO_READ8(sc, off) \
175         bus_read_8((sc)->sc_sysio_res, (off))
176 #define SYSIO_WRITE8(sc, off, v) \
177         bus_write_8((sc)->sc_sysio_res, (off), (v))
178
179 static device_probe_t sbus_probe;
180 static device_attach_t sbus_attach;
181 static bus_print_child_t sbus_print_child;
182 static bus_probe_nomatch_t sbus_probe_nomatch;
183 static bus_read_ivar_t sbus_read_ivar;
184 static bus_get_resource_list_t sbus_get_resource_list;
185 static bus_setup_intr_t sbus_setup_intr;
186 static bus_alloc_resource_t sbus_alloc_resource;
187 static bus_release_resource_t sbus_release_resource;
188 static bus_activate_resource_t sbus_activate_resource;
189 static bus_deactivate_resource_t sbus_deactivate_resource;
190 static bus_get_dma_tag_t sbus_get_dma_tag;
191 static ofw_bus_get_devinfo_t sbus_get_devinfo;
192
193 static int sbus_inlist(const char *, const char *const *);
194 static struct sbus_devinfo * sbus_setup_dinfo(device_t, struct sbus_softc *,
195     phandle_t);
196 static void sbus_destroy_dinfo(struct sbus_devinfo *);
197 static void sbus_intr_enable(void *);
198 static void sbus_intr_disable(void *);
199 static void sbus_intr_assign(void *);
200 static void sbus_intr_clear(void *);
201 static int sbus_find_intrmap(struct sbus_softc *, u_int, bus_addr_t *,
202     bus_addr_t *);
203 static bus_space_tag_t sbus_alloc_bustag(struct sbus_softc *);
204 static driver_intr_t sbus_overtemp;
205 static driver_intr_t sbus_pwrfail;
206 static int sbus_print_res(struct sbus_devinfo *);
207
208 static device_method_t sbus_methods[] = {
209         /* Device interface */
210         DEVMETHOD(device_probe,         sbus_probe),
211         DEVMETHOD(device_attach,        sbus_attach),
212         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
213         DEVMETHOD(device_suspend,       bus_generic_suspend),
214         DEVMETHOD(device_resume,        bus_generic_resume),
215
216         /* Bus interface */
217         DEVMETHOD(bus_print_child,      sbus_print_child),
218         DEVMETHOD(bus_probe_nomatch,    sbus_probe_nomatch),
219         DEVMETHOD(bus_read_ivar,        sbus_read_ivar),
220         DEVMETHOD(bus_alloc_resource,   sbus_alloc_resource),
221         DEVMETHOD(bus_activate_resource,        sbus_activate_resource),
222         DEVMETHOD(bus_deactivate_resource,      sbus_deactivate_resource),
223         DEVMETHOD(bus_release_resource, sbus_release_resource),
224         DEVMETHOD(bus_setup_intr,       sbus_setup_intr),
225         DEVMETHOD(bus_teardown_intr,    bus_generic_teardown_intr),
226         DEVMETHOD(bus_get_resource,     bus_generic_rl_get_resource),
227         DEVMETHOD(bus_get_resource_list, sbus_get_resource_list),
228         DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
229         DEVMETHOD(bus_get_dma_tag,      sbus_get_dma_tag),
230
231         /* ofw_bus interface */
232         DEVMETHOD(ofw_bus_get_devinfo,  sbus_get_devinfo),
233         DEVMETHOD(ofw_bus_get_compat,   ofw_bus_gen_get_compat),
234         DEVMETHOD(ofw_bus_get_model,    ofw_bus_gen_get_model),
235         DEVMETHOD(ofw_bus_get_name,     ofw_bus_gen_get_name),
236         DEVMETHOD(ofw_bus_get_node,     ofw_bus_gen_get_node),
237         DEVMETHOD(ofw_bus_get_type,     ofw_bus_gen_get_type),
238
239         KOBJMETHOD_END
240 };
241
242 static driver_t sbus_driver = {
243         "sbus",
244         sbus_methods,
245         sizeof(struct sbus_softc),
246 };
247
248 static devclass_t sbus_devclass;
249
250 DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, 0, 0);
251 MODULE_VERSION(sbus, 1);
252
253 #define OFW_SBUS_TYPE   "sbus"
254 #define OFW_SBUS_NAME   "sbus"
255
256 static const struct intr_controller sbus_ic = {
257         sbus_intr_enable,
258         sbus_intr_disable,
259         sbus_intr_assign,
260         sbus_intr_clear
261 };
262
263 struct sbus_icarg {
264         struct sbus_softc       *sica_sc;
265         bus_addr_t              sica_map;
266         bus_addr_t              sica_clr;
267 };
268
269 static const char *const sbus_order_first[] = {
270         "auxio",
271         "dma",
272         NULL
273 };
274
275 static int
276 sbus_inlist(const char *name, const char *const *list)
277 {
278         int i;
279
280         if (name == NULL)
281                 return (0);
282         for (i = 0; list[i] != NULL; i++) {
283                 if (strcmp(name, list[i]) == 0)
284                         return (1);
285         }
286         return (0);
287 }
288
289 static int
290 sbus_probe(device_t dev)
291 {
292         const char *t;
293
294         t = ofw_bus_get_type(dev);
295         if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
296             strcmp(ofw_bus_get_name(dev), OFW_SBUS_NAME) != 0)
297                 return (ENXIO);
298         device_set_desc(dev, "U2S UPA-SBus bridge");
299         return (0);
300 }
301
302 static int
303 sbus_attach(device_t dev)
304 {
305         struct sbus_softc *sc;
306         struct sbus_devinfo *sdi;
307         struct sbus_icarg *sica;
308         struct sbus_ranges *range;
309         struct resource *res;
310         struct resource_list *rl;
311         device_t cdev;
312         bus_addr_t intrclr, intrmap, phys;
313         bus_size_t size;
314         u_long vec;
315         phandle_t child, node;
316         uint32_t prop;
317         int i, j;
318
319         sc = device_get_softc(dev);
320         sc->sc_dev = dev;
321         node = ofw_bus_get_node(dev);
322
323         i = 0;
324         sc->sc_sysio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i,
325             RF_ACTIVE);
326         if (sc->sc_sysio_res == NULL)
327                 panic("%s: cannot allocate device memory", __func__);
328
329         if (OF_getprop(node, "interrupts", &prop, sizeof(prop)) == -1)
330                 panic("%s: cannot get IGN", __func__);
331         sc->sc_ign = INTIGN(prop);
332         sc->sc_cbustag = sbus_alloc_bustag(sc);
333
334         /*
335          * Record clock frequency for synchronous SCSI.
336          * IS THIS THE CORRECT DEFAULT??
337          */
338         if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
339                 prop = 25000000;
340         sc->sc_clockfreq = prop;
341         prop /= 1000;
342         device_printf(dev, "clock %d.%03d MHz\n", prop / 1000, prop % 1000);
343
344         /*
345          * Collect address translations from the OBP.
346          */
347         if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
348             sizeof(*range), (void **)&range)) == -1) {
349                 panic("%s: error getting ranges property", __func__);
350         }
351         sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
352             M_DEVBUF, M_NOWAIT);
353         if (sc->sc_rd == NULL)
354                 panic("%s: cannot allocate rmans", __func__);
355         /*
356          * Preallocate all space that the SBus bridge decodes, so that nothing
357          * else gets in the way; set up rmans etc.
358          */
359         rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
360         for (i = 0; i < sc->sc_nrange; i++) {
361                 phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
362                 size = range[i].size;
363                 sc->sc_rd[i].rd_slot = range[i].cspace;
364                 sc->sc_rd[i].rd_coffset = range[i].coffset;
365                 sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
366                 j = resource_list_add_next(rl, SYS_RES_MEMORY, phys,
367                     phys + size - 1, size);
368                 if ((res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &j,
369                     RF_ACTIVE)) == NULL)
370                         panic("%s: cannot allocate decoded range", __func__);
371                 sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
372                 sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
373                 sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
374                 if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
375                     rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
376                         panic("%s: failed to set up memory rman", __func__);
377                 sc->sc_rd[i].rd_poffset = phys;
378                 sc->sc_rd[i].rd_pend = phys + size;
379                 sc->sc_rd[i].rd_res = res;
380         }
381         free(range, M_OFWPROP);
382
383         /*
384          * Get the SBus burst transfer size if burst transfers are supported.
385          */
386         if (OF_getprop(node, "up-burst-sizes", &sc->sc_burst,
387             sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
388                 sc->sc_burst =
389                     (SBUS_BURST64_DEF << SBUS_BURST64_SHIFT) | SBUS_BURST_DEF;
390
391
392         /* initalise the IOMMU */
393
394         /* punch in our copies */
395         sc->sc_is.is_pmaxaddr = IOMMU_MAXADDR(SBUS_IOMMU_BITS);
396         sc->sc_is.is_bustag = rman_get_bustag(sc->sc_sysio_res);
397         sc->sc_is.is_bushandle = rman_get_bushandle(sc->sc_sysio_res);
398         sc->sc_is.is_iommu = SBR_IOMMU;
399         sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
400         sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
401         sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
402         sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
403         sc->sc_is.is_dtcmp = 0;
404         sc->sc_is.is_sb[0] = SBR_STRBUF;
405         sc->sc_is.is_sb[1] = 0;
406
407         /*
408          * Note: the SBus IOMMU ignores the high bits of an address, so a NULL
409          * DMA pointer will be translated by the first page of the IOTSB.
410          * To detect bugs we'll allocate and ignore the first entry.
411          */
412         iommu_init(device_get_nameunit(dev), &sc->sc_is, 3, -1, 1);
413
414         /* Create the DMA tag. */
415         if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
416             sc->sc_is.is_pmaxaddr, ~0, NULL, NULL, sc->sc_is.is_pmaxaddr,
417             0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
418                 panic("%s: bus_dma_tag_create failed", __func__);
419         /* Customize the tag. */
420         sc->sc_cdmatag->dt_cookie = &sc->sc_is;
421         sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
422
423         /*
424          * Hunt through all the interrupt mapping regs and register our
425          * interrupt controller for the corresponding interrupt vectors.
426          * We do this early in order to be able to catch stray interrupts.
427          */
428         for (i = 0; i <= SBUS_MAX_INO; i++) {
429                 if (sbus_find_intrmap(sc, i, &intrmap, &intrclr) == 0)
430                         continue;
431                 sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT);
432                 if (sica == NULL)
433                         panic("%s: could not allocate interrupt controller "
434                             "argument", __func__);
435                 sica->sica_sc = sc;
436                 sica->sica_map = intrmap;
437                 sica->sica_clr = intrclr;
438 #ifdef SBUS_DEBUG
439                 device_printf(dev,
440                     "intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n",
441                     i, (i & INTMAP_OBIO_MASK) == 0 ? "SBus slot" : "OBIO",
442                     (u_long)intrmap, (u_long)SYSIO_READ8(sc, intrmap),
443                     (u_long)intrclr);
444 #endif
445                 j = intr_controller_register(INTMAP_VEC(sc->sc_ign, i),
446                     &sbus_ic, sica);
447                 if (j != 0)
448                         device_printf(dev, "could not register interrupt "
449                             "controller for INO %d (%d)\n", i, j);
450         }
451
452         /* Enable the over-temperature and power-fail interrupts. */
453         i = 4;
454         sc->sc_ot_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
455             RF_ACTIVE);
456         if (sc->sc_ot_ires == NULL ||
457             INTIGN(vec = rman_get_start(sc->sc_ot_ires)) != sc->sc_ign ||
458             INTVEC(SYSIO_READ8(sc, SBR_THERM_INT_MAP)) != vec ||
459             intr_vectors[vec].iv_ic != &sbus_ic ||
460             bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_FAST,
461             NULL, sbus_overtemp, sc, &sc->sc_ot_ihand) != 0)
462                 panic("%s: failed to set up temperature interrupt", __func__);
463         i = 3;
464         sc->sc_pf_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
465             RF_ACTIVE);
466         if (sc->sc_pf_ires == NULL ||
467             INTIGN(vec = rman_get_start(sc->sc_pf_ires)) != sc->sc_ign ||
468             INTVEC(SYSIO_READ8(sc, SBR_POWER_INT_MAP)) != vec ||
469             intr_vectors[vec].iv_ic != &sbus_ic ||
470             bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_FAST,
471             NULL, sbus_pwrfail, sc, &sc->sc_pf_ihand) != 0)
472                 panic("%s: failed to set up power fail interrupt", __func__);
473
474         /* Initialize the counter-timer. */
475         sparc64_counter_init(device_get_nameunit(dev),
476             rman_get_bustag(sc->sc_sysio_res),
477             rman_get_bushandle(sc->sc_sysio_res), SBR_TC0);
478
479         /*
480          * Loop through ROM children, fixing any relative addresses
481          * and then configuring each device.
482          */
483         for (child = OF_child(node); child != 0; child = OF_peer(child)) {
484                 if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL)
485                         continue;
486                 /*
487                  * For devices where there are variants that are actually
488                  * split into two SBus devices (as opposed to the first
489                  * half of the device being a SBus device and the second
490                  * half hanging off of the first one) like 'auxio' and
491                  * 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
492                  * which is a prerequisite to the driver attaching to the
493                  * second one with a lower order. Saves us from dealing
494                  * with different probe orders in the respective device
495                  * drivers which generally is more hackish.
496                  */
497                 cdev = device_add_child_ordered(dev, (OF_child(child) == 0 &&
498                     sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ?
499                     SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1);
500                 if (cdev == NULL) {
501                         device_printf(dev,
502                             "<%s>: device_add_child_ordered failed\n",
503                             sdi->sdi_obdinfo.obd_name);
504                         sbus_destroy_dinfo(sdi);
505                         continue;
506                 }
507                 device_set_ivars(cdev, sdi);
508         }
509         return (bus_generic_attach(dev));
510 }
511
512 static struct sbus_devinfo *
513 sbus_setup_dinfo(device_t dev, struct sbus_softc *sc, phandle_t node)
514 {
515         struct sbus_devinfo *sdi;
516         struct sbus_regs *reg;
517         u_int32_t base, iv, *intr;
518         int i, nreg, nintr, slot, rslot;
519
520         sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK);
521         if (ofw_bus_gen_setup_devinfo(&sdi->sdi_obdinfo, node) != 0) {
522                 free(sdi, M_DEVBUF);
523                 return (NULL);
524         }
525         resource_list_init(&sdi->sdi_rl);
526         slot = -1;
527         nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)&reg);
528         if (nreg == -1) {
529                 if (sdi->sdi_obdinfo.obd_type == NULL ||
530                     strcmp(sdi->sdi_obdinfo.obd_type, "hierarchical") != 0) {
531                         device_printf(dev, "<%s>: incomplete\n",
532                             sdi->sdi_obdinfo.obd_name);
533                         goto fail;
534                 }
535         } else {
536                 for (i = 0; i < nreg; i++) {
537                         base = reg[i].sbr_offset;
538                         if (SBUS_ABS(base)) {
539                                 rslot = SBUS_ABS_TO_SLOT(base);
540                                 base = SBUS_ABS_TO_OFFSET(base);
541                         } else
542                                 rslot = reg[i].sbr_slot;
543                         if (slot != -1 && slot != rslot) {
544                                 device_printf(dev, "<%s>: multiple slots\n",
545                                     sdi->sdi_obdinfo.obd_name);
546                                 free(reg, M_OFWPROP);
547                                 goto fail;
548                         }
549                         slot = rslot;
550
551                         resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i,
552                             base, base + reg[i].sbr_size, reg[i].sbr_size);
553                 }
554                 free(reg, M_OFWPROP);
555         }
556         sdi->sdi_slot = slot;
557
558         /*
559          * The `interrupts' property contains the SBus interrupt level.
560          */
561         nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intr),
562             (void **)&intr);
563         if (nintr != -1) {
564                 for (i = 0; i < nintr; i++) {
565                         iv = intr[i];
566                         /*
567                          * SBus card devices need the slot number encoded into
568                          * the vector as this is generally not done.
569                          */
570                         if ((iv & INTMAP_OBIO_MASK) == 0)
571                                 iv |= slot << 3;
572                         iv = INTMAP_VEC(sc->sc_ign, iv);
573                         resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i,
574                             iv, iv, 1);
575                 }
576                 free(intr, M_OFWPROP);
577         }
578         if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz,
579             sizeof(sdi->sdi_burstsz)) == -1)
580                 sdi->sdi_burstsz = sc->sc_burst;
581         else
582                 sdi->sdi_burstsz &= sc->sc_burst;
583         if (OF_getprop(node, "clock-frequency", &sdi->sdi_clockfreq,
584             sizeof(sdi->sdi_clockfreq)) == -1)
585                 sdi->sdi_clockfreq = sc->sc_clockfreq;
586
587         return (sdi);
588
589 fail:
590         sbus_destroy_dinfo(sdi);
591         return (NULL);
592 }
593
594 static void
595 sbus_destroy_dinfo(struct sbus_devinfo *dinfo)
596 {
597
598         resource_list_free(&dinfo->sdi_rl);
599         ofw_bus_gen_destroy_devinfo(&dinfo->sdi_obdinfo);
600         free(dinfo, M_DEVBUF);
601 }
602
603 static int
604 sbus_print_child(device_t dev, device_t child)
605 {
606         int rv;
607
608         rv = bus_print_child_header(dev, child);
609         rv += sbus_print_res(device_get_ivars(child));
610         rv += bus_print_child_footer(dev, child);
611         return (rv);
612 }
613
614 static void
615 sbus_probe_nomatch(device_t dev, device_t child)
616 {
617         const char *type;
618
619         device_printf(dev, "<%s>", ofw_bus_get_name(child));
620         sbus_print_res(device_get_ivars(child));
621         type = ofw_bus_get_type(child);
622         printf(" type %s (no driver attached)\n",
623             type != NULL ? type : "unknown");
624 }
625
626 static int
627 sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
628 {
629         struct sbus_softc *sc;
630         struct sbus_devinfo *dinfo;
631
632         sc = device_get_softc(dev);
633         if ((dinfo = device_get_ivars(child)) == NULL)
634                 return (ENOENT);
635         switch (which) {
636         case SBUS_IVAR_BURSTSZ:
637                 *result = dinfo->sdi_burstsz;
638                 break;
639         case SBUS_IVAR_CLOCKFREQ:
640                 *result = dinfo->sdi_clockfreq;
641                 break;
642         case SBUS_IVAR_IGN:
643                 *result = sc->sc_ign;
644                 break;
645         case SBUS_IVAR_SLOT:
646                 *result = dinfo->sdi_slot;
647                 break;
648         default:
649                 return (ENOENT);
650         }
651         return (0);
652 }
653
654 static struct resource_list *
655 sbus_get_resource_list(device_t dev, device_t child)
656 {
657         struct sbus_devinfo *sdi;
658
659         sdi = device_get_ivars(child);
660         return (&sdi->sdi_rl);
661 }
662
663 static void
664 sbus_intr_enable(void *arg)
665 {
666         struct intr_vector *iv = arg;
667         struct sbus_icarg *sica = iv->iv_icarg;
668
669         SYSIO_WRITE8(sica->sica_sc, sica->sica_map,
670             INTMAP_ENABLE(iv->iv_vec, iv->iv_mid));
671 }
672
673 static void
674 sbus_intr_disable(void *arg)
675 {
676         struct intr_vector *iv = arg;
677         struct sbus_icarg *sica = iv->iv_icarg;
678
679         SYSIO_WRITE8(sica->sica_sc, sica->sica_map, iv->iv_vec);
680 }
681
682 static void
683 sbus_intr_assign(void *arg)
684 {
685         struct intr_vector *iv = arg;
686         struct sbus_icarg *sica = iv->iv_icarg;
687
688         SYSIO_WRITE8(sica->sica_sc, sica->sica_map, INTMAP_TID(
689             SYSIO_READ8(sica->sica_sc, sica->sica_map), iv->iv_mid));
690 }
691
692 static void
693 sbus_intr_clear(void *arg)
694 {
695         struct intr_vector *iv = arg;
696         struct sbus_icarg *sica = iv->iv_icarg;
697
698         SYSIO_WRITE8(sica->sica_sc, sica->sica_clr, 0);
699 }
700
701 static int
702 sbus_find_intrmap(struct sbus_softc *sc, u_int ino, bus_addr_t *intrmapptr,
703     bus_addr_t *intrclrptr)
704 {
705         bus_addr_t intrclr, intrmap;
706         int i;
707
708         if (ino > SBUS_MAX_INO) {
709                 device_printf(sc->sc_dev, "out of range INO %d requested\n",
710                     ino);
711                 return (0);
712         }
713
714         if ((ino & INTMAP_OBIO_MASK) == 0) {
715                 intrmap = SBR_SLOT0_INT_MAP + INTSLOT(ino) * 8;
716                 intrclr = SBR_SLOT0_INT_CLR +
717                     (INTSLOT(ino) * 8 * 8) + (INTPRI(ino) * 8);
718         } else {
719                 intrclr = 0;
720                 for (i = 0, intrmap = SBR_SCSI_INT_MAP;
721                     intrmap <= SBR_RESERVED_INT_MAP; intrmap += 8, i++) {
722                         if (INTVEC(SYSIO_READ8(sc, intrmap)) ==
723                             INTMAP_VEC(sc->sc_ign, ino)) {
724                                 intrclr = SBR_SCSI_INT_CLR + i * 8;
725                                 break;
726                         }
727                 }
728                 if (intrclr == 0)
729                         return (0);
730         }
731         if (intrmapptr != NULL)
732                 *intrmapptr = intrmap;
733         if (intrclrptr != NULL)
734                 *intrclrptr = intrclr;
735         return (1);
736 }
737
738 static int
739 sbus_setup_intr(device_t dev, device_t child, struct resource *ires, int flags,
740     driver_filter_t *filt, driver_intr_t *intr, void *arg, void **cookiep)
741 {
742         struct sbus_softc *sc;
743         u_long vec;
744
745         sc = device_get_softc(dev);
746         /*
747          * Make sure the vector is fully specified and we registered
748          * our interrupt controller for it.
749          */
750         vec = rman_get_start(ires);
751         if (INTIGN(vec) != sc->sc_ign || intr_vectors[vec].iv_ic != &sbus_ic) {
752                 device_printf(dev, "invalid interrupt vector 0x%lx\n", vec);
753                 return (EINVAL);
754         }
755         return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr,
756             arg, cookiep));
757 }
758
759 static struct resource *
760 sbus_alloc_resource(device_t bus, device_t child, int type, int *rid,
761     u_long start, u_long end, u_long count, u_int flags)
762 {
763         struct sbus_softc *sc;
764         struct rman *rm;
765         struct resource *rv;
766         struct resource_list *rl;
767         struct resource_list_entry *rle;
768         device_t schild;
769         bus_space_handle_t bh;
770         bus_addr_t toffs;
771         bus_size_t tend;
772         int i, slot;
773         int isdefault, needactivate, passthrough;
774
775         isdefault = (start == 0UL && end == ~0UL);
776         needactivate = flags & RF_ACTIVE;
777         passthrough = (device_get_parent(child) != bus);
778         rle = NULL;
779         sc = device_get_softc(bus);
780         rl = BUS_GET_RESOURCE_LIST(bus, child);
781         switch (type) {
782         case SYS_RES_IRQ:
783                 return (resource_list_alloc(rl, bus, child, type, rid, start,
784                     end, count, flags));
785         case SYS_RES_MEMORY:
786                 if (!passthrough) {
787                         rle = resource_list_find(rl, type, *rid);
788                         if (rle == NULL)
789                                 return (NULL);
790                         if (rle->res != NULL)
791                                 panic("%s: resource entry is busy", __func__);
792                         if (isdefault) {
793                                 start = rle->start;
794                                 count = ulmax(count, rle->count);
795                                 end = ulmax(rle->end, start + count - 1);
796                         }
797                 }
798                 rm = NULL;
799                 bh = toffs = tend = 0;
800                 schild = child;
801                 while (device_get_parent(schild) != bus)
802                         schild = device_get_parent(schild);
803                 slot = sbus_get_slot(schild);
804                 for (i = 0; i < sc->sc_nrange; i++) {
805                         if (sc->sc_rd[i].rd_slot != slot ||
806                             start < sc->sc_rd[i].rd_coffset ||
807                             start > sc->sc_rd[i].rd_cend)
808                                 continue;
809                         /* Disallow cross-range allocations. */
810                         if (end > sc->sc_rd[i].rd_cend)
811                                 return (NULL);
812                         /* We've found the connection to the parent bus */
813                         toffs = start - sc->sc_rd[i].rd_coffset;
814                         tend = end - sc->sc_rd[i].rd_coffset;
815                         rm = &sc->sc_rd[i].rd_rman;
816                         bh = sc->sc_rd[i].rd_bushandle;
817                         break;
818                 }
819                 if (rm == NULL)
820                         return (NULL);
821                 flags &= ~RF_ACTIVE;
822                 rv = rman_reserve_resource(rm, toffs, tend, count, flags,
823                     child);
824                 if (rv == NULL)
825                         return (NULL);
826                 rman_set_rid(rv, *rid);
827                 rman_set_bustag(rv, sc->sc_cbustag);
828                 rman_set_bushandle(rv, bh + rman_get_start(rv));
829                 if (needactivate) {
830                         if (bus_activate_resource(child, type, *rid, rv)) {
831                                 rman_release_resource(rv);
832                                 return (NULL);
833                         }
834                 }
835                 if (!passthrough)
836                         rle->res = rv;
837                 return (rv);
838         default:
839                 return (NULL);
840         }
841 }
842
843 static int
844 sbus_activate_resource(device_t bus, device_t child, int type, int rid,
845     struct resource *r)
846 {
847         void *p;
848         int error;
849
850         if (type == SYS_RES_IRQ) {
851                 return (BUS_ACTIVATE_RESOURCE(device_get_parent(bus),
852                     child, type, rid, r));
853         }
854         if (type == SYS_RES_MEMORY) {
855                 /*
856                  * Need to memory-map the device space, as some drivers
857                  * depend on the virtual address being set and usable.
858                  */
859                 error = sparc64_bus_mem_map(rman_get_bustag(r),
860                     rman_get_bushandle(r), rman_get_size(r), 0, 0, &p);
861                 if (error != 0)
862                         return (error);
863                 rman_set_virtual(r, p);
864         }
865         return (rman_activate_resource(r));
866 }
867
868 static int
869 sbus_deactivate_resource(device_t bus, device_t child, int type, int rid,
870     struct resource *r)
871 {
872
873         if (type == SYS_RES_IRQ) {
874                 return (BUS_DEACTIVATE_RESOURCE(device_get_parent(bus),
875                     child, type, rid, r));
876         }
877         if (type == SYS_RES_MEMORY) {
878                 sparc64_bus_mem_unmap(rman_get_virtual(r), rman_get_size(r));
879                 rman_set_virtual(r, NULL);
880         }
881         return (rman_deactivate_resource(r));
882 }
883
884 static int
885 sbus_release_resource(device_t bus, device_t child, int type, int rid,
886     struct resource *r)
887 {
888         struct resource_list *rl;
889         struct resource_list_entry *rle;
890         int error, passthrough;
891
892         passthrough = (device_get_parent(child) != bus);
893         rl = BUS_GET_RESOURCE_LIST(bus, child);
894         if (type == SYS_RES_IRQ)
895                 return (resource_list_release(rl, bus, child, type, rid, r));
896         if ((rman_get_flags(r) & RF_ACTIVE) != 0) {
897                 error = bus_deactivate_resource(child, type, rid, r);
898                 if (error != 0)
899                         return (error);
900         }
901         error = rman_release_resource(r);
902         if (error != 0 || passthrough)
903                 return (error);
904         rle = resource_list_find(rl, type, rid);
905         if (rle == NULL)
906                 panic("%s: cannot find resource", __func__);
907         if (rle->res == NULL)
908                 panic("%s: resource entry is not busy", __func__);
909         rle->res = NULL;
910         return (0);
911 }
912
913 static bus_dma_tag_t
914 sbus_get_dma_tag(device_t bus, device_t child)
915 {
916         struct sbus_softc *sc;
917
918         sc = device_get_softc(bus);
919         return (sc->sc_cdmatag);
920 }
921
922 static const struct ofw_bus_devinfo *
923 sbus_get_devinfo(device_t bus, device_t child)
924 {
925         struct sbus_devinfo *sdi;
926
927         sdi = device_get_ivars(child);
928         return (&sdi->sdi_obdinfo);
929 }
930
931 /*
932  * Handle an overtemp situation.
933  *
934  * SPARCs have temperature sensors which generate interrupts
935  * if the machine's temperature exceeds a certain threshold.
936  * This handles the interrupt and powers off the machine.
937  * The same needs to be done to PCI controller drivers.
938  */
939 static void
940 sbus_overtemp(void *arg)
941 {
942         static int shutdown;
943
944         /* As the interrupt is cleared we may be called multiple times. */
945         if (shutdown != 0)
946                 return;
947         shutdown++;
948         printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n");
949         shutdown_nice(RB_POWEROFF);
950 }
951
952 /* Try to shut down in time in case of power failure. */
953 static void
954 sbus_pwrfail(void *arg)
955 {
956         static int shutdown;
957
958         /* As the interrupt is cleared we may be called multiple times. */
959         if (shutdown != 0)
960                 return;
961         shutdown++;
962         printf("Power failure detected\nShutting down NOW.\n");
963         shutdown_nice(0);
964 }
965
966 static bus_space_tag_t
967 sbus_alloc_bustag(struct sbus_softc *sc)
968 {
969         bus_space_tag_t sbt;
970
971         sbt = (bus_space_tag_t)malloc(sizeof(struct bus_space_tag), M_DEVBUF,
972             M_NOWAIT | M_ZERO);
973         if (sbt == NULL)
974                 panic("%s: out of memory", __func__);
975
976         sbt->bst_cookie = sc;
977         sbt->bst_parent = rman_get_bustag(sc->sc_sysio_res);
978         sbt->bst_type = SBUS_BUS_SPACE;
979         return (sbt);
980 }
981
982 static int
983 sbus_print_res(struct sbus_devinfo *sdi)
984 {
985         int rv;
986
987         rv = 0;
988         rv += resource_list_print_type(&sdi->sdi_rl, "mem", SYS_RES_MEMORY,
989             "%#lx");
990         rv += resource_list_print_type(&sdi->sdi_rl, "irq", SYS_RES_IRQ,
991             "%ld");
992         return (rv);
993 }