]> CyberLeo.Net >> Repos - FreeBSD/releng/8.1.git/blob - contrib/binutils/gas/doc/c-ia64.texi
Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.
[FreeBSD/releng/8.1.git] / contrib / binutils / gas / doc / c-ia64.texi
1 @c Copyright 2002
2 @c Free Software Foundation, Inc.
3 @c   Contributed by David Mosberger-Tang <davidm@hpl.hp.com>
4 @c This is part of the GAS manual.
5 @c For copying conditions, see the file as.texinfo.
6
7 @ifset GENERIC
8 @page
9 @node IA-64-Dependent
10 @chapter IA-64 Dependent Features
11 @end ifset
12
13 @ifclear GENERIC
14 @node Machine Dependencies
15 @chapter IA-64 Dependent Features
16 @end ifclear
17
18 @cindex IA-64 support
19 @menu
20 * IA-64 Options::              Options
21 * IA-64 Syntax::               Syntax
22 @c * IA-64 Floating Point::       Floating Point                // to be written
23 @c * IA-64 Directives::           IA-64 Machine Directives      // to be written
24 * IA-64 Opcodes::              Opcodes
25 @end menu
26
27 @node IA-64 Options
28 @section Options
29 @cindex IA-64 options
30 @cindex options for IA-64
31
32 @table @option
33 @cindex @code{-mconstant-gp} command line option, IA-64
34
35 @item -mconstant-gp
36 This option instructs the assembler to mark the resulting object file
37 as using the ``constant GP'' model.  With this model, it is assumed
38 that the entire program uses a single global pointer (GP) value.  Note
39 that this option does not in any fashion affect the machine code
40 emitted by the assembler.  All it does is turn on the EF_IA_64_CONS_GP
41 flag in the ELF file header.
42
43 @item -mauto-pic
44 This option instructs the assembler to mark the resulting object file
45 as using the ``constant GP without function descriptor'' data model.
46 This model is like the ``constant GP'' model, except that it
47 additionally does away with function descriptors.  What this means is
48 that the address of a function refers directly to the function's code
49 entry-point.  Normally, such an address would refer to a function
50 descriptor, which contains both the code entry-point and the GP-value
51 needed by the function.  Note that this option does not in any fashion
52 affect the machine code emitted by the assembler.  All it does is
53 turn on the EF_IA_64_NOFUNCDESC_CONS_GP flag in the ELF file header.
54
55 @item -milp32
56 @item -milp64
57 @item -mlp64
58 @item -mp64
59 These options select the data model.  The assembler defaults to @code{-mlp64}
60 (LP64 data model).
61
62 @item -mle
63 @item -mbe
64 These options select the byte order.  The @code{-mle} option selects little-endian
65 byte order (default) and @code{-mbe} selects big-endian byte order.  Note that
66 IA-64 machine code always uses little-endian byte order.
67
68 @item -x
69 @item -xexplicit
70 These options turn on dependency violation checking.  This checking is turned on by
71 default.
72
73 @item -xauto
74 This option instructs the assembler to automatically insert stop bits where necessary
75 to remove dependency violations.
76
77 @item -xdebug
78 This turns on debug output intended to help tracking down bugs in the dependency
79 violation checker.
80
81 @end table
82
83 @cindex IA-64 Syntax
84 @node IA-64 Syntax
85 @section Syntax
86 The assembler syntax closely follows the IA-64 Assembly Language
87 Reference Guide.
88
89 @menu
90 * IA-64-Chars::                Special Characters
91 * IA-64-Regs::                 Register Names
92 * IA-64-Bits::                 Bit Names
93 * IA-64-Relocs::               Relocations
94 @end menu
95
96 @node IA-64-Chars
97 @subsection Special Characters
98
99 @cindex line comment character, IA-64
100 @cindex IA-64 line comment character
101 @samp{//} is the line comment token.
102
103 @cindex line separator, IA-64
104 @cindex statement separator, IA-64
105 @cindex IA-64 line separator
106 @samp{;} can be used instead of a newline to separate statements.
107
108 @node IA-64-Regs
109 @subsection Register Names
110 @cindex IA-64 registers
111 @cindex register names, IA-64
112
113 The 128 integer registers are referred to as @samp{r@var{n}}.
114 The 128 floating-point registers are referred to as @samp{f@var{n}}.
115 The 128 application registers are referred to as @samp{ar@var{n}}.
116 The 128 control registers are referred to as @samp{cr@var{n}}.
117 The 64 one-bit predicate registers are referred to as @samp{p@var{n}}.
118 The 8 branch registers are referred to as @samp{b@var{n}}.
119 In addition, the assembler defines a number of aliases:
120 @samp{gp} (@samp{r1}), @samp{sp} (@samp{r12}), @samp{rp} (@samp{b0}),
121 @samp{ret0} (@samp{r8}), @samp{ret1} (@samp{r9}), @samp{ret2} (@samp{r10}),
122 @samp{ret3} (@samp{r9}), @samp{farg@var{n}} (@samp{f8+@var{n}}), and
123 @samp{fret@var{n}} (@samp{f8+@var{n}}).
124
125 For convenience, the assembler also defines aliases for all named application
126 and control registers.  For example, @samp{ar.bsp} refers to the register
127 backing store pointer (@samp{ar17}).  Similarly, @samp{cr.eoi} refers to
128 the end-of-interrupt register (@samp{cr67}).
129
130 @node IA-64-Bits
131 @subsection IA-64 Processor-Status-Register (PSR) Bit Names
132 @cindex IA-64 Processor-status-Register bit names
133 @cindex PSR bits
134 @cindex bit names, IA-64
135
136 The assembler defines bit masks for each of the bits in the IA-64
137 processor status register.  For example, @samp{psr.ic} corresponds to
138 a value of 0x2000.  These masks are primarily intended for use with
139 the @sample{ssm}/@sample{sum} and @sample{rsm}/@sample{rum}
140 instructions, but they can be used anywhere else where an integer
141 constant is expected.
142
143 @node IA-64 Opcodes
144 @section Opcodes
145 For detailed information on the IA-64 machine instruction set, see the
146 @c Attempt to work around a very overfull hbox.
147 @iftex
148 IA-64 Assembly Language Reference Guide available at
149 @smallfonts
150 @example
151 http://developer.intel.com/design/itanium/arch_spec.htm
152 @end example
153 @textfonts
154 @end iftex
155 @ifnottex
156 @uref{http://developer.intel.com/design/itanium/arch_spec.htm,IA-64 Architecture Handbook}.
157 @end ifnottex