2 * Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer,
10 * without modification, immediately at the beginning of the file.
11 * 2. Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
31 #include <sys/param.h>
32 #include <sys/module.h>
33 #include <sys/systm.h>
34 #include <sys/kernel.h>
37 #include <sys/endian.h>
38 #include <sys/malloc.h>
40 #include <sys/mutex.h>
42 #include <sys/taskqueue.h>
44 #include <machine/stdarg.h>
45 #include <machine/resource.h>
46 #include <machine/bus.h>
48 #include <dev/pci/pcivar.h>
49 #include <dev/pci/pcireg.h>
50 #include <dev/ata/ata-all.h>
51 #include <dev/ata/ata-pci.h>
54 /* local prototypes */
55 static int ata_ati_chipinit(device_t dev);
56 static int ata_ati_ixp700_ch_attach(device_t dev);
57 static int ata_ati_setmode(device_t dev, int target, int mode);
68 * ATI chipset support functions
71 ata_ati_probe(device_t dev)
73 struct ata_pci_controller *ctlr = device_get_softc(dev);
74 static struct ata_chip_id ids[] =
75 {{ ATA_ATI_IXP200, 0x00, ATI_PATA, 0, ATA_UDMA5, "IXP200" },
76 { ATA_ATI_IXP300, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP300" },
77 { ATA_ATI_IXP300_S1, 0x00, ATI_SATA, 0, ATA_SA150, "IXP300" },
78 { ATA_ATI_IXP400, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP400" },
79 { ATA_ATI_IXP400_S1, 0x00, ATI_SATA, 0, ATA_SA150, "IXP400" },
80 { ATA_ATI_IXP400_S2, 0x00, ATI_SATA, 0, ATA_SA150, "IXP400" },
81 { ATA_ATI_IXP600, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP600" },
82 { ATA_ATI_IXP600_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP600" },
83 { ATA_ATI_IXP700, 0x00, ATI_PATA, 0, ATA_UDMA6, "IXP700/800" },
84 { ATA_ATI_IXP700_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
85 { ATA_ATI_IXP700_S2, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
86 { ATA_ATI_IXP700_S3, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
87 { ATA_ATI_IXP700_S4, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP700/800" },
88 { ATA_ATI_IXP800_S1, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP800" },
89 { ATA_ATI_IXP800_S2, 0x00, ATI_AHCI, 0, ATA_SA300, "IXP800" },
92 if (pci_get_vendor(dev) != ATA_ATI_ID)
95 if (!(ctlr->chip = ata_match_chip(dev, ids)))
100 switch (ctlr->chip->cfg1) {
102 ctlr->chipinit = ata_ati_chipinit;
106 * the ATI SATA controller is actually a SiI 3112 controller
107 * cfg values below much match those in ata-siliconimage.c
109 ctlr->chip->cfg1 = SII_MEMIO;
110 ctlr->chip->cfg2 = SII_BUG;
111 ctlr->chipinit = ata_sii_chipinit;
114 ctlr->chipinit = ata_ahci_chipinit;
117 return (BUS_PROBE_DEFAULT);
121 ata_ati_chipinit(device_t dev)
123 struct ata_pci_controller *ctlr = device_get_softc(dev);
127 if (ata_setup_interrupt(dev, ata_generic_intr))
130 switch (ctlr->chip->chipid) {
132 /* IXP600 only has 1 PATA channel */
137 * When "combined mode" is enabled, an additional PATA channel is
138 * emulated with two SATA ports and appears on this device.
139 * This mode can only be detected via SMB controller.
141 smbdev = pci_find_device(ATA_ATI_ID, 0x4385);
142 if (smbdev != NULL) {
143 satacfg = pci_read_config(smbdev, 0xad, 1);
145 device_printf(dev, "SATA controller %s (%s%s channel)\n",
146 (satacfg & 0x01) == 0 ? "disabled" : "enabled",
147 (satacfg & 0x08) == 0 ? "" : "combined mode, ",
148 (satacfg & 0x10) == 0 ? "primary" : "secondary");
149 ctlr->chipset_data = (void *)(uintptr_t)satacfg;
151 * If SATA controller is enabled but combined mode is disabled,
152 * we have only one PATA channel. Ignore a non-existent channel.
154 if ((satacfg & 0x09) == 0x01)
155 ctlr->ichannels &= ~(1 << ((satacfg & 0x10) >> 4));
157 ctlr->ch_attach = ata_ati_ixp700_ch_attach;
163 ctlr->setmode = ata_ati_setmode;
168 ata_ati_ixp700_ch_attach(device_t dev)
170 struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
171 struct ata_channel *ch = device_get_softc(dev);
172 uint8_t satacfg = (uint8_t)(uintptr_t)ctlr->chipset_data;
174 /* Setup the usual register normal pci style. */
175 if (ata_pci_ch_attach(dev))
178 /* One of channels is PATA, another is SATA. */
179 if (ch->unit == ((satacfg & 0x10) >> 4))
180 ch->flags |= ATA_SATA;
185 ata_ati_setmode(device_t dev, int target, int mode)
187 device_t parent = device_get_parent(dev);
188 struct ata_pci_controller *ctlr = device_get_softc(parent);
189 struct ata_channel *ch = device_get_softc(dev);
190 int devno = (ch->unit << 1) + target;
191 int offset = (devno ^ 0x01) << 3;
193 u_int8_t piotimings[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
194 u_int8_t dmatimings[] = { 0x77, 0x21, 0x20 };
196 mode = min(mode, ctlr->chip->max_dma);
197 if (mode >= ATA_UDMA0) {
198 /* Set UDMA mode, enable UDMA, set WDMA2/PIO4 */
199 pci_write_config(parent, 0x56,
200 (pci_read_config(parent, 0x56, 2) &
201 ~(0xf << (devno << 2))) |
202 ((mode & ATA_MODE_MASK) << (devno << 2)), 2);
203 pci_write_config(parent, 0x54,
204 pci_read_config(parent, 0x54, 1) |
206 pci_write_config(parent, 0x44,
207 (pci_read_config(parent, 0x44, 4) &
209 (dmatimings[2] << offset), 4);
211 } else if (mode >= ATA_WDMA0) {
212 /* Disable UDMA, set WDMA mode and timings, calculate PIO. */
213 pci_write_config(parent, 0x54,
214 pci_read_config(parent, 0x54, 1) &
215 ~(0x01 << devno), 1);
216 pci_write_config(parent, 0x44,
217 (pci_read_config(parent, 0x44, 4) &
219 (dmatimings[mode & ATA_MODE_MASK] << offset), 4);
220 piomode = (mode == ATA_WDMA0) ? ATA_PIO0 :
221 (mode == ATA_WDMA1) ? ATA_PIO3 : ATA_PIO4;
223 /* Disable UDMA, set requested PIO. */
224 pci_write_config(parent, 0x54,
225 pci_read_config(parent, 0x54, 1) &
226 ~(0x01 << devno), 1);
229 /* Set PIO mode and timings, calculated above. */
230 pci_write_config(parent, 0x4a,
231 (pci_read_config(parent, 0x4a, 2) &
232 ~(0xf << (devno << 2))) |
233 ((piomode - ATA_PIO0) << (devno<<2)),2);
234 pci_write_config(parent, 0x40,
235 (pci_read_config(parent, 0x40, 4) &
237 (piotimings[ata_mode2idx(piomode)] << offset), 4);
241 ATA_DECLARE_DRIVER(ata_ati);
242 MODULE_DEPEND(ata_ati, ata_ahci, 1, 1, 1);
243 MODULE_DEPEND(ata_ati, ata_sii, 1, 1, 1);