]> CyberLeo.Net >> Repos - FreeBSD/releng/8.1.git/blob - sys/dev/fdc/fdc.c
Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.
[FreeBSD/releng/8.1.git] / sys / dev / fdc / fdc.c
1 /*-
2  * Copyright (c) 2004 Poul-Henning Kamp
3  * Copyright (c) 1990 The Regents of the University of California.
4  * All rights reserved.
5  *
6  * This code is derived from software contributed to Berkeley by
7  * Don Ahn.
8  *
9  * Libretto PCMCIA floppy support by David Horwitt (dhorwitt@ucsd.edu)
10  * aided by the Linux floppy driver modifications from David Bateman
11  * (dbateman@eng.uts.edu.au).
12  *
13  * Copyright (c) 1993, 1994 by
14  *  jc@irbs.UUCP (John Capo)
15  *  vak@zebub.msk.su (Serge Vakulenko)
16  *  ache@astral.msk.su (Andrew A. Chernov)
17  *
18  * Copyright (c) 1993, 1994, 1995 by
19  *  joerg_wunsch@uriah.sax.de (Joerg Wunsch)
20  *  dufault@hda.com (Peter Dufault)
21  *
22  * Copyright (c) 2001 Joerg Wunsch,
23  *  joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch)
24  *
25  * Redistribution and use in source and binary forms, with or without
26  * modification, are permitted provided that the following conditions
27  * are met:
28  * 1. Redistributions of source code must retain the above copyright
29  *    notice, this list of conditions and the following disclaimer.
30  * 2. Redistributions in binary form must reproduce the above copyright
31  *    notice, this list of conditions and the following disclaimer in the
32  *    documentation and/or other materials provided with the distribution.
33  * 4. Neither the name of the University nor the names of its contributors
34  *    may be used to endorse or promote products derived from this software
35  *    without specific prior written permission.
36  *
37  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
38  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
39  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
40  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
41  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
42  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
43  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
44  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
45  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
46  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
47  * SUCH DAMAGE.
48  *
49  *      from:   @(#)fd.c        7.4 (Berkeley) 5/25/91
50  *
51  */
52
53 #include <sys/cdefs.h>
54 __FBSDID("$FreeBSD$");
55
56 #include "opt_fdc.h"
57
58 #include <sys/param.h>
59 #include <sys/bio.h>
60 #include <sys/bus.h>
61 #include <sys/devicestat.h>
62 #include <sys/disk.h>
63 #include <sys/fcntl.h>
64 #include <sys/fdcio.h>
65 #include <sys/filio.h>
66 #include <sys/kernel.h>
67 #include <sys/kthread.h>
68 #include <sys/lock.h>
69 #include <sys/malloc.h>
70 #include <sys/module.h>
71 #include <sys/mutex.h>
72 #include <sys/priv.h>
73 #include <sys/proc.h>
74 #include <sys/rman.h>
75 #include <sys/sysctl.h>
76 #include <sys/systm.h>
77
78 #include <geom/geom.h>
79
80 #include <machine/bus.h>
81 #include <machine/clock.h>
82 #include <machine/stdarg.h>
83
84 #include <isa/isavar.h>
85 #include <isa/isareg.h>
86 #include <dev/fdc/fdcvar.h>
87 #include <isa/rtc.h>
88
89 #include <dev/ic/nec765.h>
90
91 /*
92  * Runtime configuration hints/flags
93  */
94
95 /* configuration flags for fd */
96 #define FD_TYPEMASK     0x0f    /* drive type, matches enum
97                                  * fd_drivetype; on i386 machines, if
98                                  * given as 0, use RTC type for fd0
99                                  * and fd1 */
100 #define FD_NO_CHLINE    0x10    /* drive does not support changeline
101                                  * aka. unit attention */
102 #define FD_NO_PROBE     0x20    /* don't probe drive (seek test), just
103                                  * assume it is there */
104
105 /*
106  * Things that could conceiveably considered parameters or tweakables
107  */
108
109 /*
110  * Maximal number of bytes in a cylinder.
111  * This is used for ISADMA bouncebuffer allocation and sets the max
112  * xfersize we support.
113  *
114  * 2.88M format has 2 x 36 x 512, allow for hacked up density.
115  */
116 #define MAX_BYTES_PER_CYL       (2 * 40 * 512)
117
118 /*
119  * Timeout value for the PIO loops to wait until the FDC main status
120  * register matches our expectations (request for master, direction
121  * bit).  This is supposed to be a number of microseconds, although
122  * timing might actually not be very accurate.
123  *
124  * Timeouts of 100 msec are believed to be required for some broken
125  * (old) hardware.
126  */
127 #define FDSTS_TIMEOUT   100000
128
129 /*
130  * After this many errors, stop whining.  Close will reset this count.
131  */
132 #define FDC_ERRMAX      100
133
134 /*
135  * AutoDensity search lists for each drive type.
136  */
137
138 static struct fd_type fd_searchlist_360k[] = {
139         { FDF_5_360 },
140         { 0 }
141 };
142
143 static struct fd_type fd_searchlist_12m[] = {
144         { FDF_5_1200 | FL_AUTO },
145         { FDF_5_360 | FL_2STEP | FL_AUTO},
146         { 0 }
147 };
148
149 static struct fd_type fd_searchlist_720k[] = {
150         { FDF_3_720 },
151         { 0 }
152 };
153
154 static struct fd_type fd_searchlist_144m[] = {
155         { FDF_3_1440 | FL_AUTO},
156         { FDF_3_720 | FL_AUTO},
157         { 0 }
158 };
159
160 static struct fd_type fd_searchlist_288m[] = {
161         { FDF_3_1440 | FL_AUTO },
162 #if 0
163         { FDF_3_2880 | FL_AUTO }, /* XXX: probably doesn't work */
164 #endif
165         { FDF_3_720 | FL_AUTO},
166         { 0 }
167 };
168
169 /*
170  * Order must match enum fd_drivetype in <sys/fdcio.h>.
171  */
172 static struct fd_type *fd_native_types[] = {
173         NULL,                           /* FDT_NONE */
174         fd_searchlist_360k,             /* FDT_360K */
175         fd_searchlist_12m,              /* FDT_12M */
176         fd_searchlist_720k,             /* FDT_720K */
177         fd_searchlist_144m,             /* FDT_144M */
178         fd_searchlist_288m,             /* FDT_288M_1 (mapped to FDT_288M) */
179         fd_searchlist_288m,             /* FDT_288M */
180 };
181
182 /*
183  * Internals start here
184  */
185
186 /* registers */
187 #define FDOUT   2       /* Digital Output Register (W) */
188 #define FDO_FDSEL       0x03    /*  floppy device select */
189 #define FDO_FRST        0x04    /*  floppy controller reset */
190 #define FDO_FDMAEN      0x08    /*  enable floppy DMA and Interrupt */
191 #define FDO_MOEN0       0x10    /*  motor enable drive 0 */
192 #define FDO_MOEN1       0x20    /*  motor enable drive 1 */
193 #define FDO_MOEN2       0x40    /*  motor enable drive 2 */
194 #define FDO_MOEN3       0x80    /*  motor enable drive 3 */
195
196 #define FDSTS   4       /* NEC 765 Main Status Register (R) */
197 #define FDDSR   4       /* Data Rate Select Register (W) */
198 #define FDDATA  5       /* NEC 765 Data Register (R/W) */
199 #define FDCTL   7       /* Control Register (W) */
200
201 /*
202  * The YE-DATA PC Card floppies use PIO to read in the data rather
203  * than DMA due to the wild variability of DMA for the PC Card
204  * devices.  DMA was deleted from the PC Card specification in version
205  * 7.2 of the standard, but that post-dates the YE-DATA devices by many
206  * years.
207  *
208  * In addition, if we cannot setup the DMA resources for the ISA
209  * attachment, we'll use this same offset for data transfer.  However,
210  * that almost certainly won't work.
211  *
212  * For this mode, offset 0 and 1 must be used to setup the transfer
213  * for this floppy.  This is OK for PC Card YE Data devices, but for
214  * ISA this is likely wrong.  These registers are only available on
215  * those systems that map them to the floppy drive.  Newer systems do
216  * not do this, and we should likely prohibit access to them (or
217  * disallow NODMA to be set).
218  */
219 #define FDBCDR          0       /* And 1 */
220 #define FD_YE_DATAPORT  6       /* Drive Data port */
221
222 #define FDI_DCHG        0x80    /* diskette has been changed */
223                                 /* requires drive and motor being selected */
224                                 /* is cleared by any step pulse to drive */
225
226 /*
227  * We have three private BIO commands.
228  */
229 #define BIO_PROBE       BIO_CMD0
230 #define BIO_RDID        BIO_CMD1
231 #define BIO_FMT         BIO_CMD2
232
233 /*
234  * Per drive structure (softc).
235  */
236 struct fd_data {
237         u_char  *fd_ioptr;      /* IO pointer */
238         u_int   fd_iosize;      /* Size of IO chunks */
239         u_int   fd_iocount;     /* Outstanding requests */
240         struct  fdc_data *fdc;  /* pointer to controller structure */
241         int     fdsu;           /* this units number on this controller */
242         enum    fd_drivetype type; /* drive type */
243         struct  fd_type *ft;    /* pointer to current type descriptor */
244         struct  fd_type fts;    /* type descriptors */
245         int     sectorsize;
246         int     flags;
247 #define FD_WP           (1<<0)  /* Write protected      */
248 #define FD_MOTOR        (1<<1)  /* motor should be on   */
249 #define FD_MOTORWAIT    (1<<2)  /* motor should be on   */
250 #define FD_EMPTY        (1<<3)  /* no media             */
251 #define FD_NEWDISK      (1<<4)  /* media changed        */
252 #define FD_ISADMA       (1<<5)  /* isa dma started      */
253         int     track;          /* where we think the head is */
254 #define FD_NO_TRACK      -2
255         int     options;        /* FDOPT_* */
256         struct  callout toffhandle;
257         struct g_geom *fd_geom;
258         struct g_provider *fd_provider;
259         device_t dev;
260         struct bio_queue_head fd_bq;
261 };
262
263 #define FD_NOT_VALID -2
264
265 static driver_intr_t fdc_intr;
266 static driver_filter_t fdc_intr_fast;
267 static void fdc_reset(struct fdc_data *);
268 static int fd_probe_disk(struct fd_data *, int *);
269
270 SYSCTL_NODE(_debug, OID_AUTO, fdc, CTLFLAG_RW, 0, "fdc driver");
271
272 static int fifo_threshold = 8;
273 SYSCTL_INT(_debug_fdc, OID_AUTO, fifo, CTLFLAG_RW, &fifo_threshold, 0,
274         "FIFO threshold setting");
275
276 static int debugflags = 0;
277 SYSCTL_INT(_debug_fdc, OID_AUTO, debugflags, CTLFLAG_RW, &debugflags, 0,
278         "Debug flags");
279
280 static int retries = 10;
281 SYSCTL_INT(_debug_fdc, OID_AUTO, retries, CTLFLAG_RW, &retries, 0,
282         "Number of retries to attempt");
283
284 static int spec1 = 0xaf;
285 SYSCTL_INT(_debug_fdc, OID_AUTO, spec1, CTLFLAG_RW, &spec1, 0,
286         "Specification byte one (step-rate + head unload)");
287
288 static int spec2 = 0x10;
289 SYSCTL_INT(_debug_fdc, OID_AUTO, spec2, CTLFLAG_RW, &spec2, 0,
290         "Specification byte two (head load time + no-dma)");
291
292 static int settle;
293 SYSCTL_INT(_debug_fdc, OID_AUTO, settle, CTLFLAG_RW, &settle, 0,
294         "Head settling time in sec/hz");
295
296 static void
297 fdprinttype(struct fd_type *ft)
298 {
299
300         printf("(%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,%d,0x%x)",
301             ft->sectrac, ft->secsize, ft->datalen, ft->gap, ft->tracks,
302             ft->size, ft->trans, ft->heads, ft->f_gap, ft->f_inter,
303             ft->offset_side2, ft->flags);
304 }
305
306 static void
307 fdsettype(struct fd_data *fd, struct fd_type *ft)
308 {
309         fd->ft = ft;
310         ft->size = ft->sectrac * ft->heads * ft->tracks;
311         fd->sectorsize = 128 << fd->ft->secsize;
312 }
313
314 /*
315  * Bus space handling (access to low-level IO).
316  */
317 __inline static void
318 fdregwr(struct fdc_data *fdc, int reg, uint8_t v)
319 {
320
321         bus_space_write_1(fdc->iot, fdc->ioh[reg], fdc->ioff[reg], v);
322 }
323
324 __inline static uint8_t
325 fdregrd(struct fdc_data *fdc, int reg)
326 {
327
328         return bus_space_read_1(fdc->iot, fdc->ioh[reg], fdc->ioff[reg]);
329 }
330
331 static void
332 fdctl_wr(struct fdc_data *fdc, u_int8_t v)
333 {
334
335         fdregwr(fdc, FDCTL, v);
336 }
337
338 static void
339 fdout_wr(struct fdc_data *fdc, u_int8_t v)
340 {
341
342         fdregwr(fdc, FDOUT, v);
343 }
344
345 static u_int8_t
346 fdsts_rd(struct fdc_data *fdc)
347 {
348
349         return fdregrd(fdc, FDSTS);
350 }
351
352 static void
353 fddsr_wr(struct fdc_data *fdc, u_int8_t v)
354 {
355
356         fdregwr(fdc, FDDSR, v);
357 }
358
359 static void
360 fddata_wr(struct fdc_data *fdc, u_int8_t v)
361 {
362
363         fdregwr(fdc, FDDATA, v);
364 }
365
366 static u_int8_t
367 fddata_rd(struct fdc_data *fdc)
368 {
369
370         return fdregrd(fdc, FDDATA);
371 }
372
373 static u_int8_t
374 fdin_rd(struct fdc_data *fdc)
375 {
376
377         return fdregrd(fdc, FDCTL);
378 }
379
380 /*
381  * Magic pseudo-DMA initialization for YE FDC. Sets count and
382  * direction.
383  */
384 static void
385 fdbcdr_wr(struct fdc_data *fdc, int iswrite, uint16_t count)
386 {
387         fdregwr(fdc, FDBCDR, (count - 1) & 0xff);
388         fdregwr(fdc, FDBCDR + 1,
389             (iswrite ? 0x80 : 0) | (((count - 1) >> 8) & 0x7f));
390 }
391
392 static int
393 fdc_err(struct fdc_data *fdc, const char *s)
394 {
395         fdc->fdc_errs++;
396         if (s) {
397                 if (fdc->fdc_errs < FDC_ERRMAX)
398                         device_printf(fdc->fdc_dev, "%s", s);
399                 else if (fdc->fdc_errs == FDC_ERRMAX)
400                         device_printf(fdc->fdc_dev, "too many errors, not "
401                                                     "logging any more\n");
402         }
403
404         return (1);
405 }
406
407 /*
408  * FDC IO functions, take care of the main status register, timeout
409  * in case the desired status bits are never set.
410  *
411  * These PIO loops initially start out with short delays between
412  * each iteration in the expectation that the required condition
413  * is usually met quickly, so it can be handled immediately.
414  */
415 static int
416 fdc_in(struct fdc_data *fdc, int *ptr)
417 {
418         int i, j, step;
419
420         step = 1;
421         for (j = 0; j < FDSTS_TIMEOUT; j += step) {
422                 i = fdsts_rd(fdc) & (NE7_DIO | NE7_RQM);
423                 if (i == (NE7_DIO|NE7_RQM)) {
424                         i = fddata_rd(fdc);
425                         if (ptr)
426                                 *ptr = i;
427                         return (0);
428                 }
429                 if (i == NE7_RQM)
430                         return (fdc_err(fdc, "ready for output in input\n"));
431                 step += step;
432                 DELAY(step);
433         }
434         return (fdc_err(fdc, bootverbose? "input ready timeout\n": 0));
435 }
436
437 static int
438 fdc_out(struct fdc_data *fdc, int x)
439 {
440         int i, j, step;
441
442         step = 1;
443         for (j = 0; j < FDSTS_TIMEOUT; j += step) {
444                 i = fdsts_rd(fdc) & (NE7_DIO | NE7_RQM);
445                 if (i == NE7_RQM) {
446                         fddata_wr(fdc, x);
447                         return (0);
448                 }
449                 if (i == (NE7_DIO|NE7_RQM))
450                         return (fdc_err(fdc, "ready for input in output\n"));
451                 step += step;
452                 DELAY(step);
453         }
454         return (fdc_err(fdc, bootverbose? "output ready timeout\n": 0));
455 }
456
457 /*
458  * fdc_cmd: Send a command to the chip.
459  * Takes a varargs with this structure:
460  *      # of output bytes
461  *      output bytes as int [...]
462  *      # of input bytes
463  *      input bytes as int* [...]
464  */
465 static int
466 fdc_cmd(struct fdc_data *fdc, int n_out, ...)
467 {
468         u_char cmd = 0;
469         int n_in;
470         int n, i;
471         va_list ap;
472
473         va_start(ap, n_out);
474         for (n = 0; n < n_out; n++) {
475                 i = va_arg(ap, int);
476                 if (n == 0)
477                         cmd = i;
478                 if (fdc_out(fdc, i) < 0) {
479                         char msg[50];
480                         snprintf(msg, sizeof(msg),
481                                 "cmd %x failed at out byte %d of %d\n",
482                                 cmd, n + 1, n_out);
483                         fdc->flags |= FDC_NEEDS_RESET;
484                         va_end(ap);
485                         return fdc_err(fdc, msg);
486                 }
487         }
488         n_in = va_arg(ap, int);
489         for (n = 0; n < n_in; n++) {
490                 int *ptr = va_arg(ap, int *);
491                 if (fdc_in(fdc, ptr) < 0) {
492                         char msg[50];
493                         snprintf(msg, sizeof(msg),
494                                 "cmd %02x failed at in byte %d of %d\n",
495                                 cmd, n + 1, n_in);
496                         fdc->flags |= FDC_NEEDS_RESET;
497                         va_end(ap);
498                         return fdc_err(fdc, msg);
499                 }
500         }
501         va_end(ap);
502         return (0);
503 }
504
505 static void
506 fdc_reset(struct fdc_data *fdc)
507 {
508         int i, r[10];
509
510         if (fdc->fdct == FDC_ENHANCED) {
511                 /* Try a software reset, default precomp, and 500 kb/s */
512                 fddsr_wr(fdc, I8207X_DSR_SR);
513         } else {
514                 /* Try a hardware reset, keep motor on */
515                 fdout_wr(fdc, fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
516                 DELAY(100);
517                 /* enable FDC, but defer interrupts a moment */
518                 fdout_wr(fdc, fdc->fdout & ~FDO_FDMAEN);
519         }
520         DELAY(100);
521         fdout_wr(fdc, fdc->fdout);
522
523         /* XXX after a reset, silently believe the FDC will accept commands */
524         if (fdc_cmd(fdc, 3, NE7CMD_SPECIFY, spec1, spec2, 0))
525                 device_printf(fdc->fdc_dev, " SPECIFY failed in reset\n");
526
527         if (fdc->fdct == FDC_ENHANCED) {
528                 if (fdc_cmd(fdc, 4,
529                     I8207X_CONFIG,
530                     0,
531                     0x40 |                      /* Enable Implied Seek */
532                     0x10 |                      /* Polling disabled */
533                     (fifo_threshold - 1),       /* Fifo threshold */
534                     0x00,                       /* Precomp track */
535                     0))
536                         device_printf(fdc->fdc_dev,
537                             " CONFIGURE failed in reset\n");
538                 if (debugflags & 1) {
539                         if (fdc_cmd(fdc, 1,
540                             I8207X_DUMPREG,
541                             10, &r[0], &r[1], &r[2], &r[3], &r[4],
542                             &r[5], &r[6], &r[7], &r[8], &r[9]))
543                                 device_printf(fdc->fdc_dev,
544                                     " DUMPREG failed in reset\n");
545                         for (i = 0; i < 10; i++)
546                                 printf(" %02x", r[i]);
547                         printf("\n");
548                 }
549         }
550 }
551
552 static int
553 fdc_sense_drive(struct fdc_data *fdc, int *st3p)
554 {
555         int st3;
556
557         if (fdc_cmd(fdc, 2, NE7CMD_SENSED, fdc->fd->fdsu, 1, &st3))
558                 return (fdc_err(fdc, "Sense Drive Status failed\n"));
559         if (st3p)
560                 *st3p = st3;
561         return (0);
562 }
563
564 static int
565 fdc_sense_int(struct fdc_data *fdc, int *st0p, int *cylp)
566 {
567         int cyl, st0, ret;
568
569         ret = fdc_cmd(fdc, 1, NE7CMD_SENSEI, 1, &st0);
570         if (ret) {
571                 (void)fdc_err(fdc, "sense intr err reading stat reg 0\n");
572                 return (ret);
573         }
574
575         if (st0p)
576                 *st0p = st0;
577
578         if ((st0 & NE7_ST0_IC) == NE7_ST0_IC_IV) {
579                 /*
580                  * There doesn't seem to have been an interrupt.
581                  */
582                 return (FD_NOT_VALID);
583         }
584
585         if (fdc_in(fdc, &cyl) < 0)
586                 return fdc_err(fdc, "can't get cyl num\n");
587
588         if (cylp)
589                 *cylp = cyl;
590
591         return (0);
592 }
593
594 static int
595 fdc_read_status(struct fdc_data *fdc)
596 {
597         int i, ret, status;
598
599         for (i = ret = 0; i < 7; i++) {
600                 ret = fdc_in(fdc, &status);
601                 fdc->status[i] = status;
602                 if (ret != 0)
603                         break;
604         }
605
606         if (ret == 0)
607                 fdc->flags |= FDC_STAT_VALID;
608         else
609                 fdc->flags &= ~FDC_STAT_VALID;
610
611         return ret;
612 }
613
614 /*
615  * Select this drive
616  */
617 static void
618 fd_select(struct fd_data *fd)
619 {
620         struct fdc_data *fdc;
621
622         /* XXX: lock controller */
623         fdc = fd->fdc;
624         fdc->fdout &= ~FDO_FDSEL;
625         fdc->fdout |= FDO_FDMAEN | FDO_FRST | fd->fdsu;
626         fdout_wr(fdc, fdc->fdout);
627 }
628
629 static void
630 fd_turnon(void *arg)
631 {
632         struct fd_data *fd;
633         struct bio *bp;
634         int once;
635
636         fd = arg;
637         mtx_assert(&fd->fdc->fdc_mtx, MA_OWNED);
638         fd->flags &= ~FD_MOTORWAIT;
639         fd->flags |= FD_MOTOR;
640         once = 0;
641         for (;;) {
642                 bp = bioq_takefirst(&fd->fd_bq);
643                 if (bp == NULL)
644                         break;
645                 bioq_disksort(&fd->fdc->head, bp);
646                 once = 1;
647         }
648         if (once)
649                 wakeup(&fd->fdc->head);
650 }
651
652 static void
653 fd_motor(struct fd_data *fd, int turnon)
654 {
655         struct fdc_data *fdc;
656
657         fdc = fd->fdc;
658 /*
659         mtx_assert(&fdc->fdc_mtx, MA_OWNED);
660 */
661         if (turnon) {
662                 fd->flags |= FD_MOTORWAIT;
663                 fdc->fdout |= (FDO_MOEN0 << fd->fdsu);
664                 callout_reset(&fd->toffhandle, hz, fd_turnon, fd);
665         } else {
666                 callout_stop(&fd->toffhandle);
667                 fd->flags &= ~(FD_MOTOR|FD_MOTORWAIT);
668                 fdc->fdout &= ~(FDO_MOEN0 << fd->fdsu);
669         }
670         fdout_wr(fdc, fdc->fdout);
671 }
672
673 static void
674 fd_turnoff(void *xfd)
675 {
676         struct fd_data *fd = xfd;
677
678         mtx_assert(&fd->fdc->fdc_mtx, MA_OWNED);
679         fd_motor(fd, 0);
680 }
681
682 /*
683  * fdc_intr - wake up the worker thread.
684  */
685
686 static void
687 fdc_intr(void *arg)
688 {
689
690         wakeup(arg);
691 }
692
693 static int
694 fdc_intr_fast(void *arg)
695 {
696
697         wakeup(arg);
698         return(FILTER_HANDLED);
699 }
700
701 /*
702  * fdc_pio(): perform programmed IO read/write for YE PCMCIA floppy.
703  */
704 static void
705 fdc_pio(struct fdc_data *fdc)
706 {
707         u_char *cptr;
708         struct bio *bp;
709         u_int count;
710
711         bp = fdc->bp;
712         cptr = fdc->fd->fd_ioptr;
713         count = fdc->fd->fd_iosize;
714
715         if (bp->bio_cmd == BIO_READ) {
716                 fdbcdr_wr(fdc, 0, count);
717                 bus_space_read_multi_1(fdc->iot, fdc->ioh[FD_YE_DATAPORT],
718                     fdc->ioff[FD_YE_DATAPORT], cptr, count);
719         } else {
720                 bus_space_write_multi_1(fdc->iot, fdc->ioh[FD_YE_DATAPORT],
721                     fdc->ioff[FD_YE_DATAPORT], cptr, count);
722                 fdbcdr_wr(fdc, 0, count);       /* needed? */
723         }
724 }
725
726 static int
727 fdc_biodone(struct fdc_data *fdc, int error)
728 {
729         struct fd_data *fd;
730         struct bio *bp;
731
732         fd = fdc->fd;
733         bp = fdc->bp;
734
735         mtx_lock(&fdc->fdc_mtx);
736         if (--fd->fd_iocount == 0)
737                 callout_reset(&fd->toffhandle, 4 * hz, fd_turnoff, fd);
738         fdc->bp = NULL;
739         fdc->fd = NULL;
740         mtx_unlock(&fdc->fdc_mtx);
741         if (bp->bio_to != NULL) {
742                 if ((debugflags & 2) && fd->fdc->retry > 0)
743                         printf("retries: %d\n", fd->fdc->retry);
744                 g_io_deliver(bp, error);
745                 return (0);
746         }
747         bp->bio_error = error;
748         bp->bio_flags |= BIO_DONE;
749         wakeup(bp);
750         return (0);
751 }
752
753 static int retry_line;
754
755 static int
756 fdc_worker(struct fdc_data *fdc)
757 {
758         struct fd_data *fd;
759         struct bio *bp;
760         int i, nsect;
761         int st0, st3, cyl, mfm, steptrac, cylinder, descyl, sec;
762         int head;
763         static int need_recal;
764         struct fdc_readid *idp;
765         struct fd_formb *finfo;
766
767         /* Have we exhausted our retries ? */
768         bp = fdc->bp;
769         fd = fdc->fd;
770         if (bp != NULL &&
771                 (fdc->retry >= retries || (fd->options & FDOPT_NORETRY))) {
772                 if ((debugflags & 4))
773                         printf("Too many retries (EIO)\n");
774                 if (fdc->flags & FDC_NEEDS_RESET) {
775                         mtx_lock(&fdc->fdc_mtx);
776                         fd->flags |= FD_EMPTY;
777                         mtx_unlock(&fdc->fdc_mtx);
778                 }
779                 return (fdc_biodone(fdc, EIO));
780         }
781
782         /* Disable ISADMA if we bailed while it was active */
783         if (fd != NULL && (fd->flags & FD_ISADMA)) {
784                 mtx_lock(&Giant);
785                 isa_dmadone(
786                     bp->bio_cmd & BIO_READ ? ISADMA_READ : ISADMA_WRITE,
787                     fd->fd_ioptr, fd->fd_iosize, fdc->dmachan);
788                 mtx_unlock(&Giant);
789                 mtx_lock(&fdc->fdc_mtx);
790                 fd->flags &= ~FD_ISADMA;
791                 mtx_unlock(&fdc->fdc_mtx);
792         }
793
794         /* Unwedge the controller ? */
795         if (fdc->flags & FDC_NEEDS_RESET) {
796                 fdc->flags &= ~FDC_NEEDS_RESET;
797                 fdc_reset(fdc);
798                 tsleep(fdc, PRIBIO, "fdcrst", hz);
799                 /* Discard results */
800                 for (i = 0; i < 4; i++)
801                         fdc_sense_int(fdc, &st0, &cyl);
802                 /* All drives must recal */
803                 need_recal = 0xf;
804         }
805
806         /* Pick up a request, if need be wait for it */
807         if (fdc->bp == NULL) {
808                 mtx_lock(&fdc->fdc_mtx);
809                 do {
810                         fdc->bp = bioq_takefirst(&fdc->head);
811                         if (fdc->bp == NULL)
812                                 msleep(&fdc->head, &fdc->fdc_mtx,
813                                     PRIBIO, "-", hz);
814                 } while (fdc->bp == NULL &&
815                     (fdc->flags & FDC_KTHREAD_EXIT) == 0);
816                 mtx_unlock(&fdc->fdc_mtx);
817
818                 if (fdc->bp == NULL)
819                         /*
820                          * Nothing to do, worker thread has been
821                          * requested to stop.
822                          */
823                         return (0);
824
825                 bp = fdc->bp;
826                 fd = fdc->fd = bp->bio_driver1;
827                 fdc->retry = 0;
828                 fd->fd_ioptr = bp->bio_data;
829                 if (bp->bio_cmd & BIO_FMT) {
830                         i = offsetof(struct fd_formb, fd_formb_cylno(0));
831                         fd->fd_ioptr += i;
832                         fd->fd_iosize = bp->bio_length - i;
833                 }
834         }
835
836         /* Select drive, setup params */
837         fd_select(fd);
838         if (fdc->fdct == FDC_ENHANCED)
839                 fddsr_wr(fdc, fd->ft->trans);
840         else
841                 fdctl_wr(fdc, fd->ft->trans);
842
843         if (bp->bio_cmd & BIO_PROBE) {
844                 if ((!(device_get_flags(fd->dev) & FD_NO_CHLINE) &&
845                     !(fdin_rd(fdc) & FDI_DCHG) &&
846                     !(fd->flags & FD_EMPTY)) ||
847                     fd_probe_disk(fd, &need_recal) == 0)
848                         return (fdc_biodone(fdc, 0));
849                 return (1);
850         }
851
852         /*
853          * If we are dead just flush the requests
854          */
855         if (fd->flags & FD_EMPTY)
856                 return (fdc_biodone(fdc, ENXIO));
857
858         /* Check if we lost our media */
859         if (fdin_rd(fdc) & FDI_DCHG) {
860                 if (debugflags & 0x40)
861                         printf("Lost disk\n");
862                 mtx_lock(&fdc->fdc_mtx);
863                 fd->flags |= FD_EMPTY;
864                 fd->flags |= FD_NEWDISK;
865                 mtx_unlock(&fdc->fdc_mtx);
866                 g_topology_lock();
867                 g_orphan_provider(fd->fd_provider, ENXIO);
868                 fd->fd_provider->flags |= G_PF_WITHER;
869                 fd->fd_provider =
870                     g_new_providerf(fd->fd_geom, fd->fd_geom->name);
871                 g_error_provider(fd->fd_provider, 0);
872                 g_topology_unlock();
873                 return (fdc_biodone(fdc, ENXIO));
874         }
875
876         /* Check if the floppy is write-protected */
877         if(bp->bio_cmd & (BIO_FMT | BIO_WRITE)) {
878                 retry_line = __LINE__;
879                 if(fdc_sense_drive(fdc, &st3) != 0)
880                         return (1);
881                 if(st3 & NE7_ST3_WP)
882                         return (fdc_biodone(fdc, EROFS));
883         }
884
885         mfm = (fd->ft->flags & FL_MFM)? NE7CMD_MFM: 0;
886         steptrac = (fd->ft->flags & FL_2STEP)? 2: 1;
887         i = fd->ft->sectrac * fd->ft->heads;
888         cylinder = bp->bio_pblkno / i;
889         descyl = cylinder * steptrac;
890         sec = bp->bio_pblkno % i;
891         nsect = i - sec;
892         head = sec / fd->ft->sectrac;
893         sec = sec % fd->ft->sectrac + 1;
894
895         /* If everything is going swimmingly, use multisector xfer */
896         if (fdc->retry == 0 && bp->bio_cmd & (BIO_READ|BIO_WRITE)) {
897                 fd->fd_iosize = imin(nsect * fd->sectorsize, bp->bio_resid);
898                 nsect = fd->fd_iosize / fd->sectorsize;
899         } else if (bp->bio_cmd & (BIO_READ|BIO_WRITE)) {
900                 fd->fd_iosize = fd->sectorsize;
901                 nsect = 1;
902         }
903
904         /* Do RECAL if we need to or are going to track zero anyway */
905         if ((need_recal & (1 << fd->fdsu)) ||
906             (cylinder == 0 && fd->track != 0) ||
907             fdc->retry > 2) {
908                 retry_line = __LINE__;
909                 if (fdc_cmd(fdc, 2, NE7CMD_RECAL, fd->fdsu, 0))
910                         return (1);
911                 tsleep(fdc, PRIBIO, "fdrecal", hz);
912                 retry_line = __LINE__;
913                 if (fdc_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
914                         return (1); /* XXX */
915                 retry_line = __LINE__;
916                 if ((st0 & 0xc0) || cyl != 0)
917                         return (1);
918                 need_recal &= ~(1 << fd->fdsu);
919                 fd->track = 0;
920                 /* let the heads settle */
921                 if (settle)
922                         tsleep(fdc->fd, PRIBIO, "fdhdstl", settle);
923         }
924
925         /*
926          * SEEK to where we want to be
927          *
928          * Enhanced controllers do implied seeks for read&write as long as
929          * we do not need multiple steps per track.
930          */
931         if (cylinder != fd->track && (
932             fdc->fdct != FDC_ENHANCED ||
933             descyl != cylinder ||
934             (bp->bio_cmd & (BIO_RDID|BIO_FMT)))) {
935                 retry_line = __LINE__;
936                 if (fdc_cmd(fdc, 3, NE7CMD_SEEK, fd->fdsu, descyl, 0))
937                         return (1);
938                 tsleep(fdc, PRIBIO, "fdseek", hz);
939                 retry_line = __LINE__;
940                 if (fdc_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
941                         return (1); /* XXX */
942                 retry_line = __LINE__;
943                 if ((st0 & 0xc0) || cyl != descyl) {
944                         need_recal |= (1 << fd->fdsu);
945                         return (1);
946                 }
947                 /* let the heads settle */
948                 if (settle)
949                         tsleep(fdc->fd, PRIBIO, "fdhdstl", settle);
950         }
951         fd->track = cylinder;
952
953         if (debugflags & 8)
954                 printf("op %x bn %ju siz %u ptr %p retry %d\n",
955                     bp->bio_cmd, bp->bio_pblkno, fd->fd_iosize,
956                     fd->fd_ioptr, fdc->retry);
957
958         /* Setup ISADMA if we need it and have it */
959         if ((bp->bio_cmd & (BIO_READ|BIO_WRITE|BIO_FMT))
960              && !(fdc->flags & FDC_NODMA)) {
961                 mtx_lock(&Giant);
962                 isa_dmastart(
963                     bp->bio_cmd & BIO_READ ? ISADMA_READ : ISADMA_WRITE,
964                     fd->fd_ioptr, fd->fd_iosize, fdc->dmachan);
965                 mtx_unlock(&Giant);
966                 mtx_lock(&fdc->fdc_mtx);
967                 fd->flags |= FD_ISADMA;
968                 mtx_unlock(&fdc->fdc_mtx);
969         }
970
971         /* Do PIO if we have to */
972         if (fdc->flags & FDC_NODMA) {
973                 if (bp->bio_cmd & (BIO_READ|BIO_WRITE|BIO_FMT))
974                         fdbcdr_wr(fdc, 1, fd->fd_iosize);
975                 if (bp->bio_cmd & (BIO_WRITE|BIO_FMT))
976                         fdc_pio(fdc);
977         }
978
979         switch(bp->bio_cmd) {
980         case BIO_FMT:
981                 /* formatting */
982                 finfo = (struct fd_formb *)bp->bio_data;
983                 retry_line = __LINE__;
984                 if (fdc_cmd(fdc, 6,
985                     NE7CMD_FORMAT | mfm,
986                     head << 2 | fd->fdsu,
987                     finfo->fd_formb_secshift,
988                     finfo->fd_formb_nsecs,
989                     finfo->fd_formb_gaplen,
990                     finfo->fd_formb_fillbyte, 0))
991                         return (1);
992                 break;
993         case BIO_RDID:
994                 retry_line = __LINE__;
995                 if (fdc_cmd(fdc, 2,
996                     NE7CMD_READID | mfm,
997                     head << 2 | fd->fdsu, 0))
998                         return (1);
999                 break;
1000         case BIO_READ:
1001                 retry_line = __LINE__;
1002                 if (fdc_cmd(fdc, 9,
1003                     NE7CMD_READ | NE7CMD_SK | mfm | NE7CMD_MT,
1004                     head << 2 | fd->fdsu,       /* head & unit */
1005                     fd->track,                  /* track */
1006                     head,                       /* head */
1007                     sec,                        /* sector + 1 */
1008                     fd->ft->secsize,            /* sector size */
1009                     fd->ft->sectrac,            /* sectors/track */
1010                     fd->ft->gap,                /* gap size */
1011                     fd->ft->datalen,            /* data length */
1012                     0))
1013                         return (1);
1014                 break;
1015         case BIO_WRITE:
1016                 retry_line = __LINE__;
1017                 if (fdc_cmd(fdc, 9,
1018                     NE7CMD_WRITE | mfm | NE7CMD_MT,
1019                     head << 2 | fd->fdsu,       /* head & unit */
1020                     fd->track,                  /* track */
1021                     head,                       /* head */
1022                     sec,                        /* sector + 1 */
1023                     fd->ft->secsize,            /* sector size */
1024                     fd->ft->sectrac,            /* sectors/track */
1025                     fd->ft->gap,                /* gap size */
1026                     fd->ft->datalen,            /* data length */
1027                     0))
1028                         return (1);
1029                 break;
1030         default:
1031                 KASSERT(0 == 1, ("Wrong bio_cmd %x\n", bp->bio_cmd));
1032         }
1033
1034         /* Wait for interrupt */
1035         i = tsleep(fdc, PRIBIO, "fddata", hz);
1036
1037         /* PIO if the read looks good */
1038         if (i == 0 && (fdc->flags & FDC_NODMA) && (bp->bio_cmd & BIO_READ))
1039                 fdc_pio(fdc);
1040
1041         /* Finish DMA */
1042         if (fd->flags & FD_ISADMA) {
1043                 mtx_lock(&Giant);
1044                 isa_dmadone(
1045                     bp->bio_cmd & BIO_READ ? ISADMA_READ : ISADMA_WRITE,
1046                     fd->fd_ioptr, fd->fd_iosize, fdc->dmachan);
1047                 mtx_unlock(&Giant);
1048                 mtx_lock(&fdc->fdc_mtx);
1049                 fd->flags &= ~FD_ISADMA;
1050                 mtx_unlock(&fdc->fdc_mtx);
1051         }
1052
1053         if (i != 0) {
1054                 /*
1055                  * Timeout.
1056                  *
1057                  * Due to IBM's brain-dead design, the FDC has a faked ready
1058                  * signal, hardwired to ready == true. Thus, any command
1059                  * issued if there's no diskette in the drive will _never_
1060                  * complete, and must be aborted by resetting the FDC.
1061                  * Many thanks, Big Blue!
1062                  */
1063                 retry_line = __LINE__;
1064                 fdc->flags |= FDC_NEEDS_RESET;
1065                 return (1);
1066         }
1067
1068         retry_line = __LINE__;
1069         if (fdc_read_status(fdc))
1070                 return (1);
1071
1072         if (debugflags & 0x10)
1073                 printf("  -> %x %x %x %x\n",
1074                     fdc->status[0], fdc->status[1],
1075                     fdc->status[2], fdc->status[3]);
1076
1077         st0 = fdc->status[0] & NE7_ST0_IC;
1078         if (st0 != 0) {
1079                 retry_line = __LINE__;
1080                 if (st0 == NE7_ST0_IC_AT && fdc->status[1] & NE7_ST1_OR) {
1081                         /*
1082                          * DMA overrun. Someone hogged the bus and
1083                          * didn't release it in time for the next
1084                          * FDC transfer.
1085                          */
1086                         return (1);
1087                 }
1088                 retry_line = __LINE__;
1089                 if(st0 == NE7_ST0_IC_IV) {
1090                         fdc->flags |= FDC_NEEDS_RESET;
1091                         return (1);
1092                 }
1093                 retry_line = __LINE__;
1094                 if(st0 == NE7_ST0_IC_AT && fdc->status[2] & NE7_ST2_WC) {
1095                         need_recal |= (1 << fd->fdsu);
1096                         return (1);
1097                 }
1098                 if (debugflags & 0x20) {
1099                         printf("status %02x %02x %02x %02x %02x %02x\n",
1100                             fdc->status[0], fdc->status[1], fdc->status[2],
1101                             fdc->status[3], fdc->status[4], fdc->status[5]);
1102                 }
1103                 retry_line = __LINE__;
1104                 return (1);
1105         }
1106         /* All OK */
1107         switch(bp->bio_cmd) {
1108         case BIO_RDID:
1109                 /* copy out ID field contents */
1110                 idp = (struct fdc_readid *)bp->bio_data;
1111                 idp->cyl = fdc->status[3];
1112                 idp->head = fdc->status[4];
1113                 idp->sec = fdc->status[5];
1114                 idp->secshift = fdc->status[6];
1115                 if (debugflags & 0x40)
1116                         printf("c %d h %d s %d z %d\n",
1117                             idp->cyl, idp->head, idp->sec, idp->secshift);
1118                 break;
1119         case BIO_READ:
1120         case BIO_WRITE:
1121                 bp->bio_pblkno += nsect;
1122                 bp->bio_resid -= fd->fd_iosize;
1123                 bp->bio_completed += fd->fd_iosize;
1124                 fd->fd_ioptr += fd->fd_iosize;
1125                 /* Since we managed to get something done, reset the retry */
1126                 fdc->retry = 0;
1127                 if (bp->bio_resid > 0)
1128                         return (0);
1129                 break;
1130         case BIO_FMT:
1131                 break;
1132         }
1133         return (fdc_biodone(fdc, 0));
1134 }
1135
1136 static void
1137 fdc_thread(void *arg)
1138 {
1139         struct fdc_data *fdc;
1140
1141         fdc = arg;
1142         int i;
1143
1144         mtx_lock(&fdc->fdc_mtx);
1145         fdc->flags |= FDC_KTHREAD_ALIVE;
1146         while ((fdc->flags & FDC_KTHREAD_EXIT) == 0) {
1147                 mtx_unlock(&fdc->fdc_mtx);
1148                 i = fdc_worker(fdc);
1149                 if (i && debugflags & 0x20) {
1150                         if (fdc->bp != NULL) {
1151                                 g_print_bio(fdc->bp);
1152                                 printf("\n");
1153                         }
1154                         printf("Retry line %d\n", retry_line);
1155                 }
1156                 fdc->retry += i;
1157                 mtx_lock(&fdc->fdc_mtx);
1158         }
1159         fdc->flags &= ~(FDC_KTHREAD_EXIT | FDC_KTHREAD_ALIVE);
1160         mtx_unlock(&fdc->fdc_mtx);
1161
1162         kproc_exit(0);
1163 }
1164
1165 /*
1166  * Enqueue a request.
1167  */
1168 static void
1169 fd_enqueue(struct fd_data *fd, struct bio *bp)
1170 {
1171         struct fdc_data *fdc;
1172         int call;
1173
1174         call = 0;
1175         fdc = fd->fdc;
1176         mtx_lock(&fdc->fdc_mtx);
1177         /* If we go from idle, cancel motor turnoff */
1178         if (fd->fd_iocount++ == 0)
1179                 callout_stop(&fd->toffhandle);
1180         if (fd->flags & FD_MOTOR) {
1181                 /* The motor is on, send it directly to the controller */
1182                 bioq_disksort(&fdc->head, bp);
1183                 wakeup(&fdc->head);
1184         } else {
1185                 /* Queue it on the drive until the motor has started */
1186                 bioq_insert_tail(&fd->fd_bq, bp);
1187                 if (!(fd->flags & FD_MOTORWAIT))
1188                         fd_motor(fd, 1);
1189         }
1190         mtx_unlock(&fdc->fdc_mtx);
1191 }
1192
1193 /*
1194  * Try to find out if we have a disk in the drive.
1195  */
1196 static int
1197 fd_probe_disk(struct fd_data *fd, int *recal)
1198 {
1199         struct fdc_data *fdc;
1200         int st0, st3, cyl;
1201         int oopts, ret;
1202
1203         fdc = fd->fdc;
1204         oopts = fd->options;
1205         fd->options |= FDOPT_NOERRLOG | FDOPT_NORETRY;
1206         ret = 1;
1207
1208         /*
1209          * First recal, then seek to cyl#1, this clears the old condition on
1210          * the disk change line so we can examine it for current status.
1211          */
1212         if (debugflags & 0x40)
1213                 printf("New disk in probe\n");
1214         mtx_lock(&fdc->fdc_mtx);
1215         fd->flags |= FD_NEWDISK;
1216         mtx_unlock(&fdc->fdc_mtx);
1217         if (fdc_cmd(fdc, 2, NE7CMD_RECAL, fd->fdsu, 0))
1218                 goto done;
1219         tsleep(fdc, PRIBIO, "fdrecal", hz);
1220         if (fdc_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
1221                 goto done;      /* XXX */
1222         if ((st0 & 0xc0) || cyl != 0)
1223                 goto done;
1224
1225         /* Seek to track 1 */
1226         if (fdc_cmd(fdc, 3, NE7CMD_SEEK, fd->fdsu, 1, 0))
1227                 goto done;
1228         tsleep(fdc, PRIBIO, "fdseek", hz);
1229         if (fdc_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
1230                 goto done;      /* XXX */
1231         *recal |= (1 << fd->fdsu);
1232         if (fdin_rd(fdc) & FDI_DCHG) {
1233                 if (debugflags & 0x40)
1234                         printf("Empty in probe\n");
1235                 mtx_lock(&fdc->fdc_mtx);
1236                 fd->flags |= FD_EMPTY;
1237                 mtx_unlock(&fdc->fdc_mtx);
1238         } else {
1239                 if (fdc_sense_drive(fdc, &st3) != 0)
1240                         goto done;
1241                 if (debugflags & 0x40)
1242                         printf("Got disk in probe\n");
1243                 mtx_lock(&fdc->fdc_mtx);
1244                 fd->flags &= ~FD_EMPTY;
1245                 if (st3 & NE7_ST3_WP)
1246                         fd->flags |= FD_WP;
1247                 else
1248                         fd->flags &= ~FD_WP;
1249                 mtx_unlock(&fdc->fdc_mtx);
1250         }
1251         ret = 0;
1252
1253 done:
1254         fd->options = oopts;
1255         return (ret);
1256 }
1257
1258 static int
1259 fdmisccmd(struct fd_data *fd, u_int cmd, void *data)
1260 {
1261         struct bio *bp;
1262         struct fd_formb *finfo;
1263         struct fdc_readid *idfield;
1264         int error;
1265
1266         bp = malloc(sizeof(struct bio), M_TEMP, M_WAITOK | M_ZERO);
1267
1268         /*
1269          * Set up a bio request for fdstrategy().  bio_offset is faked
1270          * so that fdstrategy() will seek to the the requested
1271          * cylinder, and use the desired head.
1272          */
1273         bp->bio_cmd = cmd;
1274         if (cmd == BIO_FMT) {
1275                 finfo = (struct fd_formb *)data;
1276                 bp->bio_pblkno =
1277                     (finfo->cyl * fd->ft->heads + finfo->head) *
1278                     fd->ft->sectrac;
1279                 bp->bio_length = sizeof *finfo;
1280         } else if (cmd == BIO_RDID) {
1281                 idfield = (struct fdc_readid *)data;
1282                 bp->bio_pblkno =
1283                     (idfield->cyl * fd->ft->heads + idfield->head) *
1284                     fd->ft->sectrac;
1285                 bp->bio_length = sizeof(struct fdc_readid);
1286         } else if (cmd == BIO_PROBE) {
1287                 /* nothing */
1288         } else
1289                 panic("wrong cmd in fdmisccmd()");
1290         bp->bio_offset = bp->bio_pblkno * fd->sectorsize;
1291         bp->bio_data = data;
1292         bp->bio_driver1 = fd;
1293         bp->bio_flags = 0;
1294
1295         fd_enqueue(fd, bp);
1296
1297         do {
1298                 tsleep(bp, PRIBIO, "fdwait", hz);
1299         } while (!(bp->bio_flags & BIO_DONE));
1300         error = bp->bio_error;
1301
1302         free(bp, M_TEMP);
1303         return (error);
1304 }
1305
1306 /*
1307  * Try figuring out the density of the media present in our device.
1308  */
1309 static int
1310 fdautoselect(struct fd_data *fd)
1311 {
1312         struct fd_type *fdtp;
1313         struct fdc_readid id;
1314         int oopts, rv;
1315
1316         if (!(fd->ft->flags & FL_AUTO))
1317                 return (0);
1318
1319         fdtp = fd_native_types[fd->type];
1320         fdsettype(fd, fdtp);
1321         if (!(fd->ft->flags & FL_AUTO))
1322                 return (0);
1323
1324         /*
1325          * Try reading sector ID fields, first at cylinder 0, head 0,
1326          * then at cylinder 2, head N.  We don't probe cylinder 1,
1327          * since for 5.25in DD media in a HD drive, there are no data
1328          * to read (2 step pulses per media cylinder required).  For
1329          * two-sided media, the second probe always goes to head 1, so
1330          * we can tell them apart from single-sided media.  As a
1331          * side-effect this means that single-sided media should be
1332          * mentioned in the search list after two-sided media of an
1333          * otherwise identical density.  Media with a different number
1334          * of sectors per track but otherwise identical parameters
1335          * cannot be distinguished at all.
1336          *
1337          * If we successfully read an ID field on both cylinders where
1338          * the recorded values match our expectation, we are done.
1339          * Otherwise, we try the next density entry from the table.
1340          *
1341          * Stepping to cylinder 2 has the side-effect of clearing the
1342          * unit attention bit.
1343          */
1344         oopts = fd->options;
1345         fd->options |= FDOPT_NOERRLOG | FDOPT_NORETRY;
1346         for (; fdtp->heads; fdtp++) {
1347                 fdsettype(fd, fdtp);
1348
1349                 id.cyl = id.head = 0;
1350                 rv = fdmisccmd(fd, BIO_RDID, &id);
1351                 if (rv != 0)
1352                         continue;
1353                 if (id.cyl != 0 || id.head != 0 || id.secshift != fdtp->secsize)
1354                         continue;
1355                 id.cyl = 2;
1356                 id.head = fd->ft->heads - 1;
1357                 rv = fdmisccmd(fd, BIO_RDID, &id);
1358                 if (id.cyl != 2 || id.head != fdtp->heads - 1 ||
1359                     id.secshift != fdtp->secsize)
1360                         continue;
1361                 if (rv == 0)
1362                         break;
1363         }
1364
1365         fd->options = oopts;
1366         if (fdtp->heads == 0) {
1367                 if (debugflags & 0x40)
1368                         device_printf(fd->dev, "autoselection failed\n");
1369                 fdsettype(fd, fd_native_types[fd->type]);
1370                 return (-1);
1371         } else {
1372                 if (debugflags & 0x40) {
1373                         device_printf(fd->dev,
1374                             "autoselected %d KB medium\n", fd->ft->size / 2);
1375                         fdprinttype(fd->ft);
1376                 }
1377                 return (0);
1378         }
1379 }
1380
1381 /*
1382  * GEOM class implementation
1383  */
1384
1385 static g_access_t       fd_access;
1386 static g_start_t        fd_start;
1387 static g_ioctl_t        fd_ioctl;
1388
1389 struct g_class g_fd_class = {
1390         .name =         "FD",
1391         .version =      G_VERSION,
1392         .start =        fd_start,
1393         .access =       fd_access,
1394         .ioctl =        fd_ioctl,
1395 };
1396
1397 static int
1398 fd_access(struct g_provider *pp, int r, int w, int e)
1399 {
1400         struct fd_data *fd;
1401         struct fdc_data *fdc;
1402         int ar, aw, ae;
1403         int busy;
1404
1405         fd = pp->geom->softc;
1406         fdc = fd->fdc;
1407
1408         /*
1409          * If our provider is withering, we can only get negative requests
1410          * and we don't want to even see them
1411          */
1412         if (pp->flags & G_PF_WITHER)
1413                 return (0);
1414
1415         ar = r + pp->acr;
1416         aw = w + pp->acw;
1417         ae = e + pp->ace;
1418
1419         if (ar == 0 && aw == 0 && ae == 0) {
1420                 device_unbusy(fd->dev);
1421                 return (0);
1422         }
1423
1424         busy = 0;
1425         if (pp->acr == 0 && pp->acw == 0 && pp->ace == 0) {
1426                 if (fdmisccmd(fd, BIO_PROBE, NULL))
1427                         return (ENXIO);
1428                 if (fd->flags & FD_EMPTY)
1429                         return (ENXIO);
1430                 if (fd->flags & FD_NEWDISK) {
1431                         if (fdautoselect(fd) != 0 &&
1432                             (device_get_flags(fd->dev) & FD_NO_CHLINE)) {
1433                                 mtx_lock(&fdc->fdc_mtx);
1434                                 fd->flags |= FD_EMPTY;
1435                                 mtx_unlock(&fdc->fdc_mtx);
1436                                 return (ENXIO);
1437                         }
1438                         mtx_lock(&fdc->fdc_mtx);
1439                         fd->flags &= ~FD_NEWDISK;
1440                         mtx_unlock(&fdc->fdc_mtx);
1441                 }
1442                 device_busy(fd->dev);
1443                 busy = 1;
1444         }
1445
1446         if (w > 0 && (fd->flags & FD_WP)) {
1447                 if (busy)
1448                         device_unbusy(fd->dev);
1449                 return (EROFS);
1450         }
1451
1452         pp->sectorsize = fd->sectorsize;
1453         pp->stripesize = fd->ft->heads * fd->ft->sectrac * fd->sectorsize;
1454         pp->mediasize = pp->stripesize * fd->ft->tracks;
1455         return (0);
1456 }
1457
1458 static void
1459 fd_start(struct bio *bp)
1460 {
1461         struct fdc_data *       fdc;
1462         struct fd_data *        fd;
1463
1464         fd = bp->bio_to->geom->softc;
1465         fdc = fd->fdc;
1466         bp->bio_driver1 = fd;
1467         if (bp->bio_cmd & BIO_GETATTR) {
1468                 if (g_handleattr_int(bp, "GEOM::fwsectors", fd->ft->sectrac))
1469                         return;
1470                 if (g_handleattr_int(bp, "GEOM::fwheads", fd->ft->heads))
1471                         return;
1472                 g_io_deliver(bp, ENOIOCTL);
1473                 return;
1474         }
1475         if (!(bp->bio_cmd & (BIO_READ|BIO_WRITE))) {
1476                 g_io_deliver(bp, EOPNOTSUPP);
1477                 return;
1478         }
1479         bp->bio_pblkno = bp->bio_offset / fd->sectorsize;
1480         bp->bio_resid = bp->bio_length;
1481         fd_enqueue(fd, bp);
1482         return;
1483 }
1484
1485 static int
1486 fd_ioctl(struct g_provider *pp, u_long cmd, void *data, int fflag, struct thread *td)
1487 {
1488         struct fd_data *fd;
1489         struct fdc_status *fsp;
1490         struct fdc_readid *rid;
1491         int error;
1492
1493         fd = pp->geom->softc;
1494
1495         switch (cmd) {
1496         case FD_GTYPE:                  /* get drive type */
1497                 *(struct fd_type *)data = *fd->ft;
1498                 return (0);
1499
1500         case FD_STYPE:                  /* set drive type */
1501                 /*
1502                  * Allow setting drive type temporarily iff
1503                  * currently unset.  Used for fdformat so any
1504                  * user can set it, and then start formatting.
1505                  */
1506                 fd->fts = *(struct fd_type *)data;
1507                 if (fd->fts.sectrac) {
1508                         /* XXX: check for rubbish */
1509                         fdsettype(fd, &fd->fts);
1510                 } else {
1511                         fdsettype(fd, fd_native_types[fd->type]);
1512                 }
1513                 if (debugflags & 0x40)
1514                         fdprinttype(fd->ft);
1515                 return (0);
1516
1517         case FD_GOPTS:                  /* get drive options */
1518                 *(int *)data = fd->options;
1519                 return (0);
1520
1521         case FD_SOPTS:                  /* set drive options */
1522                 fd->options = *(int *)data;
1523                 return (0);
1524
1525         case FD_CLRERR:
1526                 error = priv_check(td, PRIV_DRIVER);
1527                 if (error)
1528                         return (error);
1529                 fd->fdc->fdc_errs = 0;
1530                 return (0);
1531
1532         case FD_GSTAT:
1533                 fsp = (struct fdc_status *)data;
1534                 if ((fd->fdc->flags & FDC_STAT_VALID) == 0)
1535                         return (EINVAL);
1536                 memcpy(fsp->status, fd->fdc->status, 7 * sizeof(u_int));
1537                 return (0);
1538
1539         case FD_GDTYPE:
1540                 *(enum fd_drivetype *)data = fd->type;
1541                 return (0);
1542
1543         case FD_FORM:
1544                 if (!(fflag & FWRITE))
1545                         return (EPERM);
1546                 if (((struct fd_formb *)data)->format_version !=
1547                     FD_FORMAT_VERSION)
1548                         return (EINVAL); /* wrong version of formatting prog */
1549                 error = fdmisccmd(fd, BIO_FMT, data);
1550                 mtx_lock(&fd->fdc->fdc_mtx);
1551                 fd->flags |= FD_NEWDISK;
1552                 mtx_unlock(&fd->fdc->fdc_mtx);
1553                 break;
1554
1555         case FD_READID:
1556                 rid = (struct fdc_readid *)data;
1557                 if (rid->cyl > 85 || rid->head > 1)
1558                         return (EINVAL);
1559                 error = fdmisccmd(fd, BIO_RDID, data);
1560                 break;
1561
1562         case FIONBIO:
1563         case FIOASYNC:
1564                 /* For backwards compat with old fd*(8) tools */
1565                 error = 0;
1566                 break;
1567
1568         default:
1569                 if (debugflags & 0x80)
1570                         printf("Unknown ioctl %lx\n", cmd);
1571                 error = ENOIOCTL;
1572                 break;
1573         }
1574         return (error);
1575 };
1576
1577
1578
1579 /*
1580  * Configuration/initialization stuff, per controller.
1581  */
1582
1583 devclass_t fdc_devclass;
1584 static devclass_t fd_devclass;
1585
1586 struct fdc_ivars {
1587         int     fdunit;
1588         int     fdtype;
1589 };
1590
1591 void
1592 fdc_release_resources(struct fdc_data *fdc)
1593 {
1594         device_t dev;
1595         struct resource *last;
1596         int i;
1597
1598         dev = fdc->fdc_dev;
1599         if (fdc->fdc_intr)
1600                 bus_teardown_intr(dev, fdc->res_irq, fdc->fdc_intr);
1601         fdc->fdc_intr = NULL;
1602         if (fdc->res_irq != NULL)
1603                 bus_release_resource(dev, SYS_RES_IRQ, fdc->rid_irq,
1604                     fdc->res_irq);
1605         fdc->res_irq = NULL;
1606         last = NULL;
1607         for (i = 0; i < FDC_MAXREG; i++) {
1608                 if (fdc->resio[i] != NULL && fdc->resio[i] != last) {
1609                         bus_release_resource(dev, SYS_RES_IOPORT,
1610                             fdc->ridio[i], fdc->resio[i]);
1611                         last = fdc->resio[i];
1612                         fdc->resio[i] = NULL;
1613                 }
1614         }
1615         if (fdc->res_drq != NULL)
1616                 bus_release_resource(dev, SYS_RES_DRQ, fdc->rid_drq,
1617                     fdc->res_drq);
1618         fdc->res_drq = NULL;
1619 }
1620
1621 int
1622 fdc_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
1623 {
1624         struct fdc_ivars *ivars = device_get_ivars(child);
1625
1626         switch (which) {
1627         case FDC_IVAR_FDUNIT:
1628                 *result = ivars->fdunit;
1629                 break;
1630         case FDC_IVAR_FDTYPE:
1631                 *result = ivars->fdtype;
1632                 break;
1633         default:
1634                 return (ENOENT);
1635         }
1636         return (0);
1637 }
1638
1639 int
1640 fdc_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
1641 {
1642         struct fdc_ivars *ivars = device_get_ivars(child);
1643
1644         switch (which) {
1645         case FDC_IVAR_FDUNIT:
1646                 ivars->fdunit = value;
1647                 break;
1648         case FDC_IVAR_FDTYPE:
1649                 ivars->fdtype = value;
1650                 break;
1651         default:
1652                 return (ENOENT);
1653         }
1654         return (0);
1655 }
1656
1657 int
1658 fdc_initial_reset(device_t dev, struct fdc_data *fdc)
1659 {
1660         int ic_type, part_id;
1661
1662         /*
1663          * A status value of 0xff is very unlikely, but not theoretically
1664          * impossible, but it is far more likely to indicate an empty bus.
1665          */
1666         if (fdsts_rd(fdc) == 0xff)
1667                 return (ENXIO);
1668
1669         /*
1670          * Assert a reset to the floppy controller and check that the status
1671          * register goes to zero.
1672          */
1673         fdout_wr(fdc, 0);
1674         fdout_wr(fdc, 0);
1675         if (fdsts_rd(fdc) != 0)
1676                 return (ENXIO);
1677
1678         /*
1679          * Clear the reset and see it come ready.
1680          */
1681         fdout_wr(fdc, FDO_FRST);
1682         DELAY(100);
1683         if (fdsts_rd(fdc) != 0x80)
1684                 return (ENXIO);
1685
1686         /* Then, see if it can handle a command. */
1687         if (fdc_cmd(fdc, 3, NE7CMD_SPECIFY, 0xaf, 0x1e, 0))
1688                 return (ENXIO);
1689
1690         /*
1691          * Try to identify the chip.
1692          *
1693          * The i8272 datasheet documents that unknown commands
1694          * will return ST0 as 0x80.  The i8272 is supposedly identical
1695          * to the NEC765.
1696          * The i82077SL datasheet says 0x90 for the VERSION command,
1697          * and several "superio" chips emulate this.
1698          */
1699         if (fdc_cmd(fdc, 1, NE7CMD_VERSION, 1, &ic_type))
1700                 return (ENXIO);
1701         if (fdc_cmd(fdc, 1, 0x18, 1, &part_id))
1702                 return (ENXIO);
1703         if (bootverbose)
1704                 device_printf(dev,
1705                     "ic_type %02x part_id %02x\n", ic_type, part_id);
1706         switch (ic_type & 0xff) {
1707         case 0x80:
1708                 device_set_desc(dev, "NEC 765 or clone");
1709                 fdc->fdct = FDC_NE765;
1710                 break;
1711         case 0x81:
1712         case 0x90:
1713                 device_set_desc(dev,
1714                     "Enhanced floppy controller");
1715                 fdc->fdct = FDC_ENHANCED;
1716                 break;
1717         default:
1718                 device_set_desc(dev, "Generic floppy controller");
1719                 fdc->fdct = FDC_UNKNOWN;
1720                 break;
1721         }
1722         return (0);
1723 }
1724
1725 int
1726 fdc_detach(device_t dev)
1727 {
1728         struct  fdc_data *fdc;
1729         int     error;
1730
1731         fdc = device_get_softc(dev);
1732
1733         /* have our children detached first */
1734         if ((error = bus_generic_detach(dev)))
1735                 return (error);
1736
1737         if (fdc->fdc_intr)
1738                 bus_teardown_intr(dev, fdc->res_irq, fdc->fdc_intr);
1739         fdc->fdc_intr = NULL;
1740
1741         /* kill worker thread */
1742         mtx_lock(&fdc->fdc_mtx);
1743         fdc->flags |= FDC_KTHREAD_EXIT;
1744         wakeup(&fdc->head);
1745         while ((fdc->flags & FDC_KTHREAD_ALIVE) != 0)
1746                 msleep(fdc->fdc_thread, &fdc->fdc_mtx, PRIBIO, "fdcdet", 0);
1747         mtx_unlock(&fdc->fdc_mtx);
1748
1749         /* reset controller, turn motor off */
1750         fdout_wr(fdc, 0);
1751
1752         if (!(fdc->flags & FDC_NODMA))
1753                 isa_dma_release(fdc->dmachan);
1754         fdc_release_resources(fdc);
1755         mtx_destroy(&fdc->fdc_mtx);
1756         return (0);
1757 }
1758
1759 /*
1760  * Add a child device to the fdc controller.  It will then be probed etc.
1761  */
1762 device_t
1763 fdc_add_child(device_t dev, const char *name, int unit)
1764 {
1765         struct fdc_ivars *ivar;
1766         device_t child;
1767
1768         ivar = malloc(sizeof *ivar, M_DEVBUF /* XXX */, M_NOWAIT | M_ZERO);
1769         if (ivar == NULL)
1770                 return (NULL);
1771         child = device_add_child(dev, name, unit);
1772         if (child == NULL) {
1773                 free(ivar, M_DEVBUF);
1774                 return (NULL);
1775         }
1776         device_set_ivars(child, ivar);
1777         ivar->fdunit = unit;
1778         ivar->fdtype = FDT_NONE;
1779         if (resource_disabled(name, unit))
1780                 device_disable(child);
1781         return (child);
1782 }
1783
1784 int
1785 fdc_attach(device_t dev)
1786 {
1787         struct  fdc_data *fdc;
1788         int     error;
1789
1790         fdc = device_get_softc(dev);
1791         fdc->fdc_dev = dev;
1792         error = fdc_initial_reset(dev, fdc);
1793         if (error) {
1794                 device_printf(dev, "does not respond\n");
1795                 return (error);
1796         }
1797         error = bus_setup_intr(dev, fdc->res_irq,
1798             INTR_TYPE_BIO | INTR_ENTROPY | 
1799             ((fdc->flags & FDC_NOFAST) ? INTR_MPSAFE : 0),                     
1800             ((fdc->flags & FDC_NOFAST) ? NULL : fdc_intr_fast),             
1801             ((fdc->flags & FDC_NOFAST) ? fdc_intr : NULL), 
1802                                fdc, &fdc->fdc_intr);
1803         if (error) {
1804                 device_printf(dev, "cannot setup interrupt\n");
1805                 return (error);
1806         }
1807         if (!(fdc->flags & FDC_NODMA)) {
1808                 error = isa_dma_acquire(fdc->dmachan);
1809                 if (!error) {
1810                         error = isa_dma_init(fdc->dmachan,
1811                             MAX_BYTES_PER_CYL, M_WAITOK);
1812                         if (error)
1813                                 isa_dma_release(fdc->dmachan);
1814                 }
1815                 if (error)
1816                         return (error);
1817         }
1818         fdc->fdcu = device_get_unit(dev);
1819         fdc->flags |= FDC_NEEDS_RESET;
1820
1821         mtx_init(&fdc->fdc_mtx, "fdc lock", NULL, MTX_DEF);
1822
1823         /* reset controller, turn motor off, clear fdout mirror reg */
1824         fdout_wr(fdc, fdc->fdout = 0);
1825         bioq_init(&fdc->head);
1826
1827         kproc_create(fdc_thread, fdc, &fdc->fdc_thread, 0, 0,
1828             "fdc%d", device_get_unit(dev));
1829
1830         settle = hz / 8;
1831
1832         return (0);
1833 }
1834
1835 int
1836 fdc_hints_probe(device_t dev)
1837 {
1838         const char *name, *dname;
1839         int i, error, dunit;
1840
1841         /*
1842          * Probe and attach any children.  We should probably detect
1843          * devices from the BIOS unless overridden.
1844          */
1845         name = device_get_nameunit(dev);
1846         i = 0;
1847         while ((resource_find_match(&i, &dname, &dunit, "at", name)) == 0) {
1848                 resource_int_value(dname, dunit, "drive", &dunit);
1849                 fdc_add_child(dev, dname, dunit);
1850         }
1851
1852         if ((error = bus_generic_attach(dev)) != 0)
1853                 return (error);
1854         return (0);
1855 }
1856
1857 int
1858 fdc_print_child(device_t me, device_t child)
1859 {
1860         int retval = 0, flags;
1861
1862         retval += bus_print_child_header(me, child);
1863         retval += printf(" on %s drive %d", device_get_nameunit(me),
1864                fdc_get_fdunit(child));
1865         if ((flags = device_get_flags(me)) != 0)
1866                 retval += printf(" flags %#x", flags);
1867         retval += printf("\n");
1868
1869         return (retval);
1870 }
1871
1872 /*
1873  * Configuration/initialization, per drive.
1874  */
1875 static int
1876 fd_probe(device_t dev)
1877 {
1878         int     i, unit;
1879         u_int   st0, st3;
1880         struct  fd_data *fd;
1881         struct  fdc_data *fdc;
1882         int     fdsu;
1883         int     flags, type;
1884
1885         fdsu = fdc_get_fdunit(dev);
1886         fd = device_get_softc(dev);
1887         fdc = device_get_softc(device_get_parent(dev));
1888         flags = device_get_flags(dev);
1889
1890         fd->dev = dev;
1891         fd->fdc = fdc;
1892         fd->fdsu = fdsu;
1893         unit = device_get_unit(dev);
1894
1895         /* Auto-probe if fdinfo is present, but always allow override. */
1896         type = flags & FD_TYPEMASK;
1897         if (type == FDT_NONE && (type = fdc_get_fdtype(dev)) != FDT_NONE) {
1898                 fd->type = type;
1899                 goto done;
1900         } else {
1901                 /* make sure fdautoselect() will be called */
1902                 fd->flags = FD_EMPTY;
1903                 fd->type = type;
1904         }
1905
1906 #if (defined(__i386__) && !defined(PC98)) || defined(__amd64__)
1907         if (fd->type == FDT_NONE && (unit == 0 || unit == 1)) {
1908                 /* Look up what the BIOS thinks we have. */
1909                 if (unit == 0)
1910                         fd->type = (rtcin(RTC_FDISKETTE) & 0xf0) >> 4;
1911                 else
1912                         fd->type = rtcin(RTC_FDISKETTE) & 0x0f;
1913                 if (fd->type == FDT_288M_1)
1914                         fd->type = FDT_288M;
1915         }
1916 #endif /* __i386__ || __amd64__ */
1917         /* is there a unit? */
1918         if (fd->type == FDT_NONE)
1919                 return (ENXIO);
1920
1921 /*
1922         mtx_lock(&fdc->fdc_mtx);
1923 */
1924         /* select it */
1925         fd_select(fd);
1926         fd_motor(fd, 1);
1927         fdc->fd = fd;
1928         fdc_reset(fdc);         /* XXX reset, then unreset, etc. */
1929         DELAY(1000000); /* 1 sec */
1930
1931         if ((flags & FD_NO_PROBE) == 0) {
1932                 /* If we're at track 0 first seek inwards. */
1933                 if ((fdc_sense_drive(fdc, &st3) == 0) &&
1934                     (st3 & NE7_ST3_T0)) {
1935                         /* Seek some steps... */
1936                         if (fdc_cmd(fdc, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) {
1937                                 /* ...wait a moment... */
1938                                 DELAY(300000);
1939                                 /* make ctrlr happy: */
1940                                 fdc_sense_int(fdc, NULL, NULL);
1941                         }
1942                 }
1943
1944                 for (i = 0; i < 2; i++) {
1945                         /*
1946                          * we must recalibrate twice, just in case the
1947                          * heads have been beyond cylinder 76, since
1948                          * most FDCs still barf when attempting to
1949                          * recalibrate more than 77 steps
1950                          */
1951                         /* go back to 0: */
1952                         if (fdc_cmd(fdc, 2, NE7CMD_RECAL, fdsu, 0) == 0) {
1953                                 /* a second being enough for full stroke seek*/
1954                                 DELAY(i == 0 ? 1000000 : 300000);
1955
1956                                 /* anything responding? */
1957                                 if (fdc_sense_int(fdc, &st0, NULL) == 0 &&
1958                                     (st0 & NE7_ST0_EC) == 0)
1959                                         break; /* already probed succesfully */
1960                         }
1961                 }
1962         }
1963
1964         fd_motor(fd, 0);
1965         fdc->fd = NULL;
1966 /*
1967         mtx_unlock(&fdc->fdc_mtx);
1968 */
1969
1970         if ((flags & FD_NO_PROBE) == 0 &&
1971             (st0 & NE7_ST0_EC) != 0) /* no track 0 -> no drive present */
1972                 return (ENXIO);
1973
1974 done:
1975
1976         switch (fd->type) {
1977         case FDT_12M:
1978                 device_set_desc(dev, "1200-KB 5.25\" drive");
1979                 break;
1980         case FDT_144M:
1981                 device_set_desc(dev, "1440-KB 3.5\" drive");
1982                 break;
1983         case FDT_288M:
1984                 device_set_desc(dev, "2880-KB 3.5\" drive (in 1440-KB mode)");
1985                 break;
1986         case FDT_360K:
1987                 device_set_desc(dev, "360-KB 5.25\" drive");
1988                 break;
1989         case FDT_720K:
1990                 device_set_desc(dev, "720-KB 3.5\" drive");
1991                 break;
1992         default:
1993                 return (ENXIO);
1994         }
1995         fd->track = FD_NO_TRACK;
1996         fd->fdc = fdc;
1997         fd->fdsu = fdsu;
1998         fd->options = 0;
1999         callout_init_mtx(&fd->toffhandle, &fd->fdc->fdc_mtx, 0);
2000
2001         /* initialize densities for subdevices */
2002         fdsettype(fd, fd_native_types[fd->type]);
2003         return (0);
2004 }
2005
2006 /*
2007  * We have to do this in a geom event because GEOM is not running
2008  * when fd_attach() is.
2009  * XXX: move fd_attach after geom like ata/scsi disks
2010  */
2011 static void
2012 fd_attach2(void *arg, int flag)
2013 {
2014         struct  fd_data *fd;
2015
2016         fd = arg;
2017
2018         fd->fd_geom = g_new_geomf(&g_fd_class,
2019             "fd%d", device_get_unit(fd->dev));
2020         fd->fd_provider = g_new_providerf(fd->fd_geom, fd->fd_geom->name);
2021         fd->fd_geom->softc = fd;
2022         g_error_provider(fd->fd_provider, 0);
2023 }
2024
2025 static int
2026 fd_attach(device_t dev)
2027 {
2028         struct  fd_data *fd;
2029
2030         fd = device_get_softc(dev);
2031         g_post_event(fd_attach2, fd, M_WAITOK, NULL);
2032         fd->flags |= FD_EMPTY;
2033         bioq_init(&fd->fd_bq);
2034
2035         return (0);
2036 }
2037
2038 static void
2039 fd_detach_geom(void *arg, int flag)
2040 {
2041         struct  fd_data *fd = arg;
2042
2043         g_topology_assert();
2044         g_wither_geom(fd->fd_geom, ENXIO);
2045 }
2046
2047 static int
2048 fd_detach(device_t dev)
2049 {
2050         struct  fd_data *fd;
2051
2052         fd = device_get_softc(dev);
2053         g_waitfor_event(fd_detach_geom, fd, M_WAITOK, NULL);
2054         while (device_get_state(dev) == DS_BUSY)
2055                 tsleep(fd, PZERO, "fdd", hz/10);
2056         callout_drain(&fd->toffhandle);
2057
2058         return (0);
2059 }
2060
2061 static device_method_t fd_methods[] = {
2062         /* Device interface */
2063         DEVMETHOD(device_probe,         fd_probe),
2064         DEVMETHOD(device_attach,        fd_attach),
2065         DEVMETHOD(device_detach,        fd_detach),
2066         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
2067         DEVMETHOD(device_suspend,       bus_generic_suspend), /* XXX */
2068         DEVMETHOD(device_resume,        bus_generic_resume), /* XXX */
2069         { 0, 0 }
2070 };
2071
2072 static driver_t fd_driver = {
2073         "fd",
2074         fd_methods,
2075         sizeof(struct fd_data)
2076 };
2077
2078 static int
2079 fdc_modevent(module_t mod, int type, void *data)
2080 {
2081
2082         return (g_modevent(NULL, type, &g_fd_class));
2083 }
2084
2085 DRIVER_MODULE(fd, fdc, fd_driver, fd_devclass, fdc_modevent, 0);