]> CyberLeo.Net >> Repos - FreeBSD/releng/8.1.git/blob - sys/powerpc/ofw/ofw_pcibus.c
Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.
[FreeBSD/releng/8.1.git] / sys / powerpc / ofw / ofw_pcibus.c
1 /*-
2  * Copyright (c) 1997, Stefan Esser <se@freebsd.org>
3  * Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
4  * Copyright (c) 2000, BSDi
5  * Copyright (c) 2003, Thomas Moestl <tmm@FreeBSD.org>
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice unmodified, this list of conditions, and the following
13  *    disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
24  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
25  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  */
29
30 #include <sys/cdefs.h>
31 __FBSDID("$FreeBSD$");
32
33 #include <sys/param.h>
34 #include <sys/bus.h>
35 #include <sys/kernel.h>
36 #include <sys/libkern.h>
37 #include <sys/module.h>
38 #include <sys/pciio.h>
39
40 #include <dev/ofw/ofw_bus.h>
41 #include <dev/ofw/ofw_bus_subr.h>
42 #include <dev/ofw/ofw_pci.h>
43 #include <dev/ofw/openfirm.h>
44
45 #include <machine/bus.h>
46 #include <machine/intr_machdep.h>
47 #include <machine/resource.h>
48
49 #include <dev/pci/pcireg.h>
50 #include <dev/pci/pcivar.h>
51 #include <dev/pci/pci_private.h>
52
53 #include "pcib_if.h"
54 #include "pci_if.h"
55
56 typedef uint32_t ofw_pci_intr_t;
57
58 /* Methods */
59 static device_probe_t ofw_pcibus_probe;
60 static device_attach_t ofw_pcibus_attach;
61 static pci_assign_interrupt_t ofw_pcibus_assign_interrupt;
62 static ofw_bus_get_devinfo_t ofw_pcibus_get_devinfo;
63 static int ofw_pcibus_child_pnpinfo_str_method(device_t cbdev, device_t child,
64     char *buf, size_t buflen);
65
66 static void ofw_pcibus_enum_devtree(device_t dev, u_int domain, u_int busno);
67 static void ofw_pcibus_enum_bus(device_t dev, u_int domain, u_int busno);
68
69 static device_method_t ofw_pcibus_methods[] = {
70         /* Device interface */
71         DEVMETHOD(device_probe,         ofw_pcibus_probe),
72         DEVMETHOD(device_attach,        ofw_pcibus_attach),
73
74         /* Bus interface */
75         DEVMETHOD(bus_child_pnpinfo_str, ofw_pcibus_child_pnpinfo_str_method),
76
77         /* PCI interface */
78         DEVMETHOD(pci_assign_interrupt, ofw_pcibus_assign_interrupt),
79
80         /* ofw_bus interface */
81         DEVMETHOD(ofw_bus_get_devinfo,  ofw_pcibus_get_devinfo),
82         DEVMETHOD(ofw_bus_get_compat,   ofw_bus_gen_get_compat),
83         DEVMETHOD(ofw_bus_get_model,    ofw_bus_gen_get_model),
84         DEVMETHOD(ofw_bus_get_name,     ofw_bus_gen_get_name),
85         DEVMETHOD(ofw_bus_get_node,     ofw_bus_gen_get_node),
86         DEVMETHOD(ofw_bus_get_type,     ofw_bus_gen_get_type),
87
88         { 0, 0 }
89 };
90
91 struct ofw_pcibus_devinfo {
92         struct pci_devinfo      opd_dinfo;
93         struct ofw_bus_devinfo  opd_obdinfo;
94 };
95
96 static devclass_t pci_devclass;
97
98 DEFINE_CLASS_1(pci, ofw_pcibus_driver, ofw_pcibus_methods, 1 /* no softc */,
99     pci_driver);
100 DRIVER_MODULE(ofw_pcibus, pcib, ofw_pcibus_driver, pci_devclass, 0, 0);
101 MODULE_VERSION(ofw_pcibus, 1);
102 MODULE_DEPEND(ofw_pcibus, pci, 1, 1, 1);
103
104 static int
105 ofw_pcibus_probe(device_t dev)
106 {
107
108         if (ofw_bus_get_node(dev) == 0)
109                 return (ENXIO);
110         device_set_desc(dev, "OFW PCI bus");
111
112         return (0);
113 }
114
115 static int
116 ofw_pcibus_attach(device_t dev)
117 {
118         u_int busno, domain;
119
120         domain = pcib_get_domain(dev);
121         busno = pcib_get_bus(dev);
122         if (bootverbose)
123                 device_printf(dev, "domain=%d, physical bus=%d\n",
124                     domain, busno);
125
126         /*
127          * Attach those children represented in the device tree.
128          */
129
130         ofw_pcibus_enum_devtree(dev, domain, busno);
131
132         /*
133          * We now attach any laggard devices. FDT, for instance, allows
134          * the device tree to enumerate only some PCI devices. Apple's
135          * OF device tree on some Grackle-based hardware can also miss
136          * functions on multi-function cards.
137          */
138
139         ofw_pcibus_enum_bus(dev, domain, busno);
140
141         return (bus_generic_attach(dev));
142 }
143
144 static void
145 ofw_pcibus_enum_devtree(device_t dev, u_int domain, u_int busno)
146 {
147         device_t pcib;
148         struct ofw_pci_register pcir;
149         struct ofw_pcibus_devinfo *dinfo;
150         phandle_t node, child;
151         u_int func, slot;
152         int intline;
153
154         pcib = device_get_parent(dev);
155         node = ofw_bus_get_node(dev);
156
157         for (child = OF_child(node); child != 0; child = OF_peer(child)) {
158                 if (OF_getprop(child, "reg", &pcir, sizeof(pcir)) == -1)
159                         continue;
160                 slot = OFW_PCI_PHYS_HI_DEVICE(pcir.phys_hi);
161                 func = OFW_PCI_PHYS_HI_FUNCTION(pcir.phys_hi);
162
163                 /* Some OFW device trees contain dupes. */
164                 if (pci_find_dbsf(domain, busno, slot, func) != NULL)
165                         continue;
166
167                 /*
168                  * The preset in the intline register is usually bogus.  Reset
169                  * it such that the PCI code will reroute the interrupt if
170                  * needed.
171                  */
172
173                 intline = PCI_INVALID_IRQ;
174                 if (OF_getproplen(child, "interrupts") > 0)
175                         intline = 0;
176                 PCIB_WRITE_CONFIG(pcib, busno, slot, func, PCIR_INTLINE,
177                     intline, 1);
178
179                 /*
180                  * Now set up the PCI and OFW bus layer devinfo and add it
181                  * to the PCI bus.
182                  */
183
184                 dinfo = (struct ofw_pcibus_devinfo *)pci_read_device(pcib,
185                     domain, busno, slot, func, sizeof(*dinfo));
186                 if (dinfo == NULL)
187                         continue;
188                 if (ofw_bus_gen_setup_devinfo(&dinfo->opd_obdinfo, child) !=
189                     0) {
190                         pci_freecfg((struct pci_devinfo *)dinfo);
191                         continue;
192                 }
193                 pci_add_child(dev, (struct pci_devinfo *)dinfo);
194
195                 /*
196                  * Some devices don't have an intpin set, but do have
197                  * interrupts. These are fully specified, and set in the
198                  * interrupts property, so add that value to the device's
199                  * resource list.
200                  */
201                 if (dinfo->opd_dinfo.cfg.intpin == 0) {
202                         ofw_pci_intr_t intr[2];
203                         phandle_t iparent;
204                         int icells;
205
206                         if (OF_getprop(child, "interrupts", &intr, 
207                             sizeof(intr)) > 0) {
208                                 iparent = 0;
209                                 icells = 1;
210                                 OF_getprop(child, "interrupt-parent", &iparent,
211                                     sizeof(iparent));
212                                 OF_getprop(iparent, "#interrupt-cells", &icells,
213                                     sizeof(icells));
214
215                                 if (iparent != 0 && icells > 1) {
216                                         powerpc_config_intr(intr[0],
217                                             (intr[1] & 1) ? INTR_TRIGGER_LEVEL :
218                                             INTR_TRIGGER_EDGE,
219                                             INTR_POLARITY_HIGH);
220                                 }
221                 
222                                 resource_list_add(&dinfo->opd_dinfo.resources,
223                                     SYS_RES_IRQ, 0, intr[0], intr[0], 1);
224                         }
225                 }
226         }
227 }
228
229 /*
230  * The following is an almost exact clone of pci_add_children(), with the
231  * addition that it (a) will not add children that have already been added,
232  * and (b) will set up the OFW devinfo to point to invalid values. This is
233  * to handle non-enumerated PCI children as exist in FDT and on the second
234  * function of the Rage 128 in my Blue & White G3.
235  */
236
237 static void
238 ofw_pcibus_enum_bus(device_t dev, u_int domain, u_int busno)
239 {
240         device_t pcib;
241         struct ofw_pcibus_devinfo *dinfo;
242         int maxslots;
243         int s, f, pcifunchigh;
244         uint8_t hdrtype;
245
246         pcib = device_get_parent(dev);
247
248         maxslots = PCIB_MAXSLOTS(pcib);
249         for (s = 0; s <= maxslots; s++) {
250                 pcifunchigh = 0;
251                 f = 0;
252                 DELAY(1);
253                 hdrtype = PCIB_READ_CONFIG(pcib, busno, s, f, PCIR_HDRTYPE, 1);
254                 if ((hdrtype & PCIM_HDRTYPE) > PCI_MAXHDRTYPE)
255                         continue;
256                 if (hdrtype & PCIM_MFDEV)
257                         pcifunchigh = PCI_FUNCMAX;
258                 for (f = 0; f <= pcifunchigh; f++) {
259                         /* Filter devices we have already added */
260                         if (pci_find_dbsf(domain, busno, s, f) != NULL)
261                                 continue;
262
263                         dinfo = (struct ofw_pcibus_devinfo *)pci_read_device(
264                             pcib, domain, busno, s, f, sizeof(*dinfo));
265                         if (dinfo != NULL) {
266                                 dinfo->opd_obdinfo.obd_node = -1;
267
268                                 dinfo->opd_obdinfo.obd_name = NULL;
269                                 dinfo->opd_obdinfo.obd_compat = NULL;
270                                 dinfo->opd_obdinfo.obd_type = NULL;
271                                 dinfo->opd_obdinfo.obd_model = NULL;
272                                 pci_add_child(dev, (struct pci_devinfo *)dinfo);
273                         }
274                 }
275         }
276 }
277
278 static int
279 ofw_pcibus_child_pnpinfo_str_method(device_t cbdev, device_t child, char *buf,
280     size_t buflen)
281 {
282         pci_child_pnpinfo_str_method(cbdev, child, buf, buflen);
283
284         if (ofw_bus_get_node(child) != -1)  {
285                 strlcat(buf, " ", buflen); /* Separate info */
286                 ofw_bus_gen_child_pnpinfo_str(cbdev, child, buf, buflen);
287         }
288
289         return (0);
290 }
291         
292 static int
293 ofw_pcibus_assign_interrupt(device_t dev, device_t child)
294 {
295         ofw_pci_intr_t intr;
296         phandle_t node;
297         int isz;
298
299         node = ofw_bus_get_node(child);
300
301         if (node == -1) {
302                 /* Non-firmware enumerated child, use standard routing */
303         
304                 /*
305                  * XXX: Right now we don't have anything sensible to do here,
306                  * since the ofw_imap stuff relies on nodes have a reg
307                  * property. There exists ways around this, so the ePAPR
308                  * spec will need to be studied.
309                  */
310
311                 return (0);
312
313 #ifdef NOTYET
314                 intr = pci_get_intpin(child);
315                 return (PCIB_ROUTE_INTERRUPT(device_get_parent(dev), child, 
316                     intr));
317 #endif
318         }
319         
320         /*
321          * Any AAPL,interrupts property gets priority and is
322          * fully specified (i.e. does not need routing)
323          */
324
325         isz = OF_getprop(node, "AAPL,interrupts", &intr, sizeof(intr));
326         if (isz == sizeof(intr)) {
327                 return (intr);
328         }
329
330         isz = OF_getprop(node, "interrupts", &intr, sizeof(intr));
331         if (isz != sizeof(intr)) {
332                 /* No property; our best guess is the intpin. */
333                 intr = pci_get_intpin(child);
334         }
335         
336         /*
337          * If we got intr from a property, it may or may not be an intpin.
338          * For on-board devices, it frequently is not, and is completely out
339          * of the valid intpin range.  For PCI slots, it hopefully is,
340          * otherwise we will have trouble interfacing with non-OFW buses
341          * such as cardbus.
342          * Since we cannot tell which it is without violating layering, we
343          * will always use the route_interrupt method, and treat exceptions
344          * on the level they become apparent.
345          */
346         return (PCIB_ROUTE_INTERRUPT(device_get_parent(dev), child, intr));
347 }
348
349 static const struct ofw_bus_devinfo *
350 ofw_pcibus_get_devinfo(device_t bus, device_t dev)
351 {
352         struct ofw_pcibus_devinfo *dinfo;
353
354         dinfo = device_get_ivars(dev);
355         return (&dinfo->opd_obdinfo);
356 }
357