]> CyberLeo.Net >> Repos - FreeBSD/releng/8.1.git/blob - sys/sparc64/sbus/sbus.c
Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.
[FreeBSD/releng/8.1.git] / sys / sparc64 / sbus / sbus.c
1 /*-
2  * Copyright (c) 1998 The NetBSD Foundation, Inc.
3  * All rights reserved.
4  *
5  * This code is derived from software contributed to The NetBSD Foundation
6  * by Paul Kranenburg.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. All advertising materials mentioning features or use of this software
17  *    must display the following acknowledgement:
18  *        This product includes software developed by the NetBSD
19  *        Foundation, Inc. and its contributors.
20  * 4. Neither the name of The NetBSD Foundation nor the names of its
21  *    contributors may be used to endorse or promote products derived
22  *    from this software without specific prior written permission.
23  *
24  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
25  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
26  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
27  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
28  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
34  * POSSIBILITY OF SUCH DAMAGE.
35  */
36 /*-
37  * Copyright (c) 1992, 1993
38  *      The Regents of the University of California.  All rights reserved.
39  *
40  * This software was developed by the Computer Systems Engineering group
41  * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
42  * contributed to Berkeley.
43  *
44  * All advertising materials mentioning features or use of this software
45  * must display the following acknowledgement:
46  *      This product includes software developed by the University of
47  *      California, Lawrence Berkeley Laboratory.
48  *
49  * Redistribution and use in source and binary forms, with or without
50  * modification, are permitted provided that the following conditions
51  * are met:
52  * 1. Redistributions of source code must retain the above copyright
53  *    notice, this list of conditions and the following disclaimer.
54  * 2. Redistributions in binary form must reproduce the above copyright
55  *    notice, this list of conditions and the following disclaimer in the
56  *    documentation and/or other materials provided with the distribution.
57  * 4. Neither the name of the University nor the names of its contributors
58  *    may be used to endorse or promote products derived from this software
59  *    without specific prior written permission.
60  *
61  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
62  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
63  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
64  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
65  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
66  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
67  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
68  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
69  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
70  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
71  * SUCH DAMAGE.
72  */
73 /*-
74  * Copyright (c) 1999 Eduardo Horvath
75  * Copyright (c) 2002 by Thomas Moestl <tmm@FreeBSD.org>.
76  * Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
77  * All rights reserved.
78  *
79  * Redistribution and use in source and binary forms, with or without
80  * modification, are permitted provided that the following conditions
81  * are met:
82  * 1. Redistributions of source code must retain the above copyright
83  *    notice, this list of conditions and the following disclaimer.
84  *
85  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR  ``AS IS'' AND
86  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
87  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
88  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR  BE LIABLE
89  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
90  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
91  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
92  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
93  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
94  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
95  * SUCH DAMAGE.
96  *
97  *      from: @(#)sbus.c        8.1 (Berkeley) 6/11/93
98  *      from: NetBSD: sbus.c,v 1.46 2001/10/07 20:30:41 eeh Exp
99  */
100
101 #include <sys/cdefs.h>
102 __FBSDID("$FreeBSD$");
103
104 /*
105  * SBus support.
106  */
107
108 #include <sys/param.h>
109 #include <sys/systm.h>
110 #include <sys/bus.h>
111 #include <sys/kernel.h>
112 #include <sys/malloc.h>
113 #include <sys/module.h>
114 #include <sys/pcpu.h>
115 #include <sys/queue.h>
116 #include <sys/reboot.h>
117 #include <sys/rman.h>
118
119 #include <dev/ofw/ofw_bus.h>
120 #include <dev/ofw/ofw_bus_subr.h>
121 #include <dev/ofw/openfirm.h>
122
123 #include <machine/bus.h>
124 #include <machine/bus_common.h>
125 #include <machine/bus_private.h>
126 #include <machine/iommureg.h>
127 #include <machine/iommuvar.h>
128 #include <machine/resource.h>
129
130 #include <sparc64/sbus/ofw_sbus.h>
131 #include <sparc64/sbus/sbusreg.h>
132 #include <sparc64/sbus/sbusvar.h>
133
134 struct sbus_devinfo {
135         int                     sdi_burstsz;
136         int                     sdi_clockfreq;
137         int                     sdi_slot;
138
139         struct ofw_bus_devinfo  sdi_obdinfo;
140         struct resource_list    sdi_rl;
141 };
142
143 /* Range descriptor, allocated for each sc_range. */
144 struct sbus_rd {
145         bus_addr_t              rd_poffset;
146         bus_addr_t              rd_pend;
147         int                     rd_slot;
148         bus_addr_t              rd_coffset;
149         bus_addr_t              rd_cend;
150         struct rman             rd_rman;
151         bus_space_handle_t      rd_bushandle;
152         struct resource         *rd_res;
153 };
154
155 struct sbus_softc {
156         device_t                sc_dev;
157         bus_dma_tag_t           sc_cdmatag;
158         bus_space_tag_t         sc_cbustag;
159         int                     sc_clockfreq;   /* clock frequency (in Hz) */
160         int                     sc_nrange;
161         struct sbus_rd          *sc_rd;
162         int                     sc_burst;       /* burst transfer sizes supp. */
163
164         struct resource         *sc_sysio_res;
165         int                     sc_ign;         /* IGN for this sysio */
166         struct iommu_state      sc_is;          /* IOMMU state (iommuvar.h) */
167
168         struct resource         *sc_ot_ires;
169         void                    *sc_ot_ihand;
170         struct resource         *sc_pf_ires;
171         void                    *sc_pf_ihand;
172 };
173
174 #define SYSIO_READ8(sc, off)                                            \
175         bus_read_8((sc)->sc_sysio_res, (off))
176 #define SYSIO_WRITE8(sc, off, v)                                        \
177         bus_write_8((sc)->sc_sysio_res, (off), (v))
178
179 static device_probe_t sbus_probe;
180 static device_attach_t sbus_attach;
181 static bus_print_child_t sbus_print_child;
182 static bus_probe_nomatch_t sbus_probe_nomatch;
183 static bus_read_ivar_t sbus_read_ivar;
184 static bus_get_resource_list_t sbus_get_resource_list;
185 static bus_setup_intr_t sbus_setup_intr;
186 static bus_alloc_resource_t sbus_alloc_resource;
187 static bus_release_resource_t sbus_release_resource;
188 static bus_activate_resource_t sbus_activate_resource;
189 static bus_deactivate_resource_t sbus_deactivate_resource;
190 static bus_get_dma_tag_t sbus_get_dma_tag;
191 static ofw_bus_get_devinfo_t sbus_get_devinfo;
192
193 static int sbus_inlist(const char *, const char *const *);
194 static struct sbus_devinfo * sbus_setup_dinfo(device_t, struct sbus_softc *,
195     phandle_t);
196 static void sbus_destroy_dinfo(struct sbus_devinfo *);
197 static void sbus_intr_enable(void *);
198 static void sbus_intr_disable(void *);
199 static void sbus_intr_assign(void *);
200 static void sbus_intr_clear(void *);
201 static int sbus_find_intrmap(struct sbus_softc *, u_int, bus_addr_t *,
202     bus_addr_t *);
203 static bus_space_tag_t sbus_alloc_bustag(struct sbus_softc *);
204 static driver_intr_t sbus_overtemp;
205 static driver_intr_t sbus_pwrfail;
206 static int sbus_print_res(struct sbus_devinfo *);
207
208 static device_method_t sbus_methods[] = {
209         /* Device interface */
210         DEVMETHOD(device_probe,         sbus_probe),
211         DEVMETHOD(device_attach,        sbus_attach),
212         DEVMETHOD(device_shutdown,      bus_generic_shutdown),
213         DEVMETHOD(device_suspend,       bus_generic_suspend),
214         DEVMETHOD(device_resume,        bus_generic_resume),
215
216         /* Bus interface */
217         DEVMETHOD(bus_print_child,      sbus_print_child),
218         DEVMETHOD(bus_probe_nomatch,    sbus_probe_nomatch),
219         DEVMETHOD(bus_read_ivar,        sbus_read_ivar),
220         DEVMETHOD(bus_alloc_resource,   sbus_alloc_resource),
221         DEVMETHOD(bus_activate_resource,        sbus_activate_resource),
222         DEVMETHOD(bus_deactivate_resource,      sbus_deactivate_resource),
223         DEVMETHOD(bus_release_resource, sbus_release_resource),
224         DEVMETHOD(bus_setup_intr,       sbus_setup_intr),
225         DEVMETHOD(bus_teardown_intr,    bus_generic_teardown_intr),
226         DEVMETHOD(bus_get_resource,     bus_generic_rl_get_resource),
227         DEVMETHOD(bus_get_resource_list, sbus_get_resource_list),
228         DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
229         DEVMETHOD(bus_get_dma_tag,      sbus_get_dma_tag),
230
231         /* ofw_bus interface */
232         DEVMETHOD(ofw_bus_get_devinfo,  sbus_get_devinfo),
233         DEVMETHOD(ofw_bus_get_compat,   ofw_bus_gen_get_compat),
234         DEVMETHOD(ofw_bus_get_model,    ofw_bus_gen_get_model),
235         DEVMETHOD(ofw_bus_get_name,     ofw_bus_gen_get_name),
236         DEVMETHOD(ofw_bus_get_node,     ofw_bus_gen_get_node),
237         DEVMETHOD(ofw_bus_get_type,     ofw_bus_gen_get_type),
238
239         KOBJMETHOD_END
240 };
241
242 static driver_t sbus_driver = {
243         "sbus",
244         sbus_methods,
245         sizeof(struct sbus_softc),
246 };
247
248 static devclass_t sbus_devclass;
249
250 EARLY_DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, 0, 0,
251     BUS_PASS_BUS);
252 MODULE_DEPEND(sbus, nexus, 1, 1, 1);
253 MODULE_VERSION(sbus, 1);
254
255 #define OFW_SBUS_TYPE   "sbus"
256 #define OFW_SBUS_NAME   "sbus"
257
258 static const struct intr_controller sbus_ic = {
259         sbus_intr_enable,
260         sbus_intr_disable,
261         sbus_intr_assign,
262         sbus_intr_clear
263 };
264
265 struct sbus_icarg {
266         struct sbus_softc       *sica_sc;
267         bus_addr_t              sica_map;
268         bus_addr_t              sica_clr;
269 };
270
271 static const char *const sbus_order_first[] = {
272         "auxio",
273         "dma",
274         NULL
275 };
276
277 static int
278 sbus_inlist(const char *name, const char *const *list)
279 {
280         int i;
281
282         if (name == NULL)
283                 return (0);
284         for (i = 0; list[i] != NULL; i++) {
285                 if (strcmp(name, list[i]) == 0)
286                         return (1);
287         }
288         return (0);
289 }
290
291 static int
292 sbus_probe(device_t dev)
293 {
294         const char *t;
295
296         t = ofw_bus_get_type(dev);
297         if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
298             strcmp(ofw_bus_get_name(dev), OFW_SBUS_NAME) != 0)
299                 return (ENXIO);
300         device_set_desc(dev, "U2S UPA-SBus bridge");
301         return (0);
302 }
303
304 static int
305 sbus_attach(device_t dev)
306 {
307         struct sbus_softc *sc;
308         struct sbus_devinfo *sdi;
309         struct sbus_icarg *sica;
310         struct sbus_ranges *range;
311         struct resource *res;
312         struct resource_list *rl;
313         device_t cdev;
314         bus_addr_t intrclr, intrmap, phys;
315         bus_size_t size;
316         u_long vec;
317         phandle_t child, node;
318         uint32_t prop;
319         int i, j;
320
321         sc = device_get_softc(dev);
322         sc->sc_dev = dev;
323         node = ofw_bus_get_node(dev);
324
325         i = 0;
326         sc->sc_sysio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i,
327             RF_ACTIVE);
328         if (sc->sc_sysio_res == NULL)
329                 panic("%s: cannot allocate device memory", __func__);
330
331         if (OF_getprop(node, "interrupts", &prop, sizeof(prop)) == -1)
332                 panic("%s: cannot get IGN", __func__);
333         sc->sc_ign = INTIGN(prop);
334         sc->sc_cbustag = sbus_alloc_bustag(sc);
335
336         /*
337          * Record clock frequency for synchronous SCSI.
338          * IS THIS THE CORRECT DEFAULT??
339          */
340         if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
341                 prop = 25000000;
342         sc->sc_clockfreq = prop;
343         prop /= 1000;
344         device_printf(dev, "clock %d.%03d MHz\n", prop / 1000, prop % 1000);
345
346         /*
347          * Collect address translations from the OBP.
348          */
349         if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
350             sizeof(*range), (void **)&range)) == -1) {
351                 panic("%s: error getting ranges property", __func__);
352         }
353         sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
354             M_DEVBUF, M_NOWAIT);
355         if (sc->sc_rd == NULL)
356                 panic("%s: cannot allocate rmans", __func__);
357         /*
358          * Preallocate all space that the SBus bridge decodes, so that nothing
359          * else gets in the way; set up rmans etc.
360          */
361         rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
362         for (i = 0; i < sc->sc_nrange; i++) {
363                 phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
364                 size = range[i].size;
365                 sc->sc_rd[i].rd_slot = range[i].cspace;
366                 sc->sc_rd[i].rd_coffset = range[i].coffset;
367                 sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
368                 j = resource_list_add_next(rl, SYS_RES_MEMORY, phys,
369                     phys + size - 1, size);
370                 if ((res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &j,
371                     RF_ACTIVE)) == NULL)
372                         panic("%s: cannot allocate decoded range", __func__);
373                 sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
374                 sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
375                 sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
376                 if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
377                     rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
378                         panic("%s: failed to set up memory rman", __func__);
379                 sc->sc_rd[i].rd_poffset = phys;
380                 sc->sc_rd[i].rd_pend = phys + size;
381                 sc->sc_rd[i].rd_res = res;
382         }
383         free(range, M_OFWPROP);
384
385         /*
386          * Get the SBus burst transfer size if burst transfers are supported.
387          */
388         if (OF_getprop(node, "up-burst-sizes", &sc->sc_burst,
389             sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
390                 sc->sc_burst =
391                     (SBUS_BURST64_DEF << SBUS_BURST64_SHIFT) | SBUS_BURST_DEF;
392
393
394         /* initalise the IOMMU */
395
396         /* punch in our copies */
397         sc->sc_is.is_pmaxaddr = IOMMU_MAXADDR(SBUS_IOMMU_BITS);
398         sc->sc_is.is_bustag = rman_get_bustag(sc->sc_sysio_res);
399         sc->sc_is.is_bushandle = rman_get_bushandle(sc->sc_sysio_res);
400         sc->sc_is.is_iommu = SBR_IOMMU;
401         sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
402         sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
403         sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
404         sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
405         sc->sc_is.is_dtcmp = 0;
406         sc->sc_is.is_sb[0] = SBR_STRBUF;
407         sc->sc_is.is_sb[1] = 0;
408
409         /*
410          * Note: the SBus IOMMU ignores the high bits of an address, so a NULL
411          * DMA pointer will be translated by the first page of the IOTSB.
412          * To detect bugs we'll allocate and ignore the first entry.
413          */
414         iommu_init(device_get_nameunit(dev), &sc->sc_is, 3, -1, 1);
415
416         /* Create the DMA tag. */
417         if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
418             sc->sc_is.is_pmaxaddr, ~0, NULL, NULL, sc->sc_is.is_pmaxaddr,
419             0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
420                 panic("%s: bus_dma_tag_create failed", __func__);
421         /* Customize the tag. */
422         sc->sc_cdmatag->dt_cookie = &sc->sc_is;
423         sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
424
425         /*
426          * Hunt through all the interrupt mapping regs and register our
427          * interrupt controller for the corresponding interrupt vectors.
428          * We do this early in order to be able to catch stray interrupts.
429          */
430         for (i = 0; i <= SBUS_MAX_INO; i++) {
431                 if (sbus_find_intrmap(sc, i, &intrmap, &intrclr) == 0)
432                         continue;
433                 sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT);
434                 if (sica == NULL)
435                         panic("%s: could not allocate interrupt controller "
436                             "argument", __func__);
437                 sica->sica_sc = sc;
438                 sica->sica_map = intrmap;
439                 sica->sica_clr = intrclr;
440 #ifdef SBUS_DEBUG
441                 device_printf(dev,
442                     "intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n",
443                     i, (i & INTMAP_OBIO_MASK) == 0 ? "SBus slot" : "OBIO",
444                     (u_long)intrmap, (u_long)SYSIO_READ8(sc, intrmap),
445                     (u_long)intrclr);
446 #endif
447                 j = intr_controller_register(INTMAP_VEC(sc->sc_ign, i),
448                     &sbus_ic, sica);
449                 if (j != 0)
450                         device_printf(dev, "could not register interrupt "
451                             "controller for INO %d (%d)\n", i, j);
452         }
453
454         /* Enable the over-temperature and power-fail interrupts. */
455         i = 4;
456         sc->sc_ot_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
457             RF_ACTIVE);
458         if (sc->sc_ot_ires == NULL ||
459             INTIGN(vec = rman_get_start(sc->sc_ot_ires)) != sc->sc_ign ||
460             INTVEC(SYSIO_READ8(sc, SBR_THERM_INT_MAP)) != vec ||
461             intr_vectors[vec].iv_ic != &sbus_ic ||
462             bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_FAST,
463             NULL, sbus_overtemp, sc, &sc->sc_ot_ihand) != 0)
464                 panic("%s: failed to set up temperature interrupt", __func__);
465         i = 3;
466         sc->sc_pf_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
467             RF_ACTIVE);
468         if (sc->sc_pf_ires == NULL ||
469             INTIGN(vec = rman_get_start(sc->sc_pf_ires)) != sc->sc_ign ||
470             INTVEC(SYSIO_READ8(sc, SBR_POWER_INT_MAP)) != vec ||
471             intr_vectors[vec].iv_ic != &sbus_ic ||
472             bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_FAST,
473             NULL, sbus_pwrfail, sc, &sc->sc_pf_ihand) != 0)
474                 panic("%s: failed to set up power fail interrupt", __func__);
475
476         /* Initialize the counter-timer. */
477         sparc64_counter_init(device_get_nameunit(dev),
478             rman_get_bustag(sc->sc_sysio_res),
479             rman_get_bushandle(sc->sc_sysio_res), SBR_TC0);
480
481         /*
482          * Loop through ROM children, fixing any relative addresses
483          * and then configuring each device.
484          */
485         for (child = OF_child(node); child != 0; child = OF_peer(child)) {
486                 if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL)
487                         continue;
488                 /*
489                  * For devices where there are variants that are actually
490                  * split into two SBus devices (as opposed to the first
491                  * half of the device being a SBus device and the second
492                  * half hanging off of the first one) like 'auxio' and
493                  * 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
494                  * which is a prerequisite to the driver attaching to the
495                  * second one with a lower order. Saves us from dealing
496                  * with different probe orders in the respective device
497                  * drivers which generally is more hackish.
498                  */
499                 cdev = device_add_child_ordered(dev, (OF_child(child) == 0 &&
500                     sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ?
501                     SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1);
502                 if (cdev == NULL) {
503                         device_printf(dev,
504                             "<%s>: device_add_child_ordered failed\n",
505                             sdi->sdi_obdinfo.obd_name);
506                         sbus_destroy_dinfo(sdi);
507                         continue;
508                 }
509                 device_set_ivars(cdev, sdi);
510         }
511         return (bus_generic_attach(dev));
512 }
513
514 static struct sbus_devinfo *
515 sbus_setup_dinfo(device_t dev, struct sbus_softc *sc, phandle_t node)
516 {
517         struct sbus_devinfo *sdi;
518         struct sbus_regs *reg;
519         u_int32_t base, iv, *intr;
520         int i, nreg, nintr, slot, rslot;
521
522         sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK);
523         if (ofw_bus_gen_setup_devinfo(&sdi->sdi_obdinfo, node) != 0) {
524                 free(sdi, M_DEVBUF);
525                 return (NULL);
526         }
527         resource_list_init(&sdi->sdi_rl);
528         slot = -1;
529         nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)&reg);
530         if (nreg == -1) {
531                 if (sdi->sdi_obdinfo.obd_type == NULL ||
532                     strcmp(sdi->sdi_obdinfo.obd_type, "hierarchical") != 0) {
533                         device_printf(dev, "<%s>: incomplete\n",
534                             sdi->sdi_obdinfo.obd_name);
535                         goto fail;
536                 }
537         } else {
538                 for (i = 0; i < nreg; i++) {
539                         base = reg[i].sbr_offset;
540                         if (SBUS_ABS(base)) {
541                                 rslot = SBUS_ABS_TO_SLOT(base);
542                                 base = SBUS_ABS_TO_OFFSET(base);
543                         } else
544                                 rslot = reg[i].sbr_slot;
545                         if (slot != -1 && slot != rslot) {
546                                 device_printf(dev, "<%s>: multiple slots\n",
547                                     sdi->sdi_obdinfo.obd_name);
548                                 free(reg, M_OFWPROP);
549                                 goto fail;
550                         }
551                         slot = rslot;
552
553                         resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i,
554                             base, base + reg[i].sbr_size, reg[i].sbr_size);
555                 }
556                 free(reg, M_OFWPROP);
557         }
558         sdi->sdi_slot = slot;
559
560         /*
561          * The `interrupts' property contains the SBus interrupt level.
562          */
563         nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intr),
564             (void **)&intr);
565         if (nintr != -1) {
566                 for (i = 0; i < nintr; i++) {
567                         iv = intr[i];
568                         /*
569                          * SBus card devices need the slot number encoded into
570                          * the vector as this is generally not done.
571                          */
572                         if ((iv & INTMAP_OBIO_MASK) == 0)
573                                 iv |= slot << 3;
574                         iv = INTMAP_VEC(sc->sc_ign, iv);
575                         resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i,
576                             iv, iv, 1);
577                 }
578                 free(intr, M_OFWPROP);
579         }
580         if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz,
581             sizeof(sdi->sdi_burstsz)) == -1)
582                 sdi->sdi_burstsz = sc->sc_burst;
583         else
584                 sdi->sdi_burstsz &= sc->sc_burst;
585         if (OF_getprop(node, "clock-frequency", &sdi->sdi_clockfreq,
586             sizeof(sdi->sdi_clockfreq)) == -1)
587                 sdi->sdi_clockfreq = sc->sc_clockfreq;
588
589         return (sdi);
590
591 fail:
592         sbus_destroy_dinfo(sdi);
593         return (NULL);
594 }
595
596 static void
597 sbus_destroy_dinfo(struct sbus_devinfo *dinfo)
598 {
599
600         resource_list_free(&dinfo->sdi_rl);
601         ofw_bus_gen_destroy_devinfo(&dinfo->sdi_obdinfo);
602         free(dinfo, M_DEVBUF);
603 }
604
605 static int
606 sbus_print_child(device_t dev, device_t child)
607 {
608         int rv;
609
610         rv = bus_print_child_header(dev, child);
611         rv += sbus_print_res(device_get_ivars(child));
612         rv += bus_print_child_footer(dev, child);
613         return (rv);
614 }
615
616 static void
617 sbus_probe_nomatch(device_t dev, device_t child)
618 {
619         const char *type;
620
621         device_printf(dev, "<%s>", ofw_bus_get_name(child));
622         sbus_print_res(device_get_ivars(child));
623         type = ofw_bus_get_type(child);
624         printf(" type %s (no driver attached)\n",
625             type != NULL ? type : "unknown");
626 }
627
628 static int
629 sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
630 {
631         struct sbus_softc *sc;
632         struct sbus_devinfo *dinfo;
633
634         sc = device_get_softc(dev);
635         if ((dinfo = device_get_ivars(child)) == NULL)
636                 return (ENOENT);
637         switch (which) {
638         case SBUS_IVAR_BURSTSZ:
639                 *result = dinfo->sdi_burstsz;
640                 break;
641         case SBUS_IVAR_CLOCKFREQ:
642                 *result = dinfo->sdi_clockfreq;
643                 break;
644         case SBUS_IVAR_IGN:
645                 *result = sc->sc_ign;
646                 break;
647         case SBUS_IVAR_SLOT:
648                 *result = dinfo->sdi_slot;
649                 break;
650         default:
651                 return (ENOENT);
652         }
653         return (0);
654 }
655
656 static struct resource_list *
657 sbus_get_resource_list(device_t dev, device_t child)
658 {
659         struct sbus_devinfo *sdi;
660
661         sdi = device_get_ivars(child);
662         return (&sdi->sdi_rl);
663 }
664
665 static void
666 sbus_intr_enable(void *arg)
667 {
668         struct intr_vector *iv = arg;
669         struct sbus_icarg *sica = iv->iv_icarg;
670
671         SYSIO_WRITE8(sica->sica_sc, sica->sica_map,
672             INTMAP_ENABLE(iv->iv_vec, iv->iv_mid));
673 }
674
675 static void
676 sbus_intr_disable(void *arg)
677 {
678         struct intr_vector *iv = arg;
679         struct sbus_icarg *sica = iv->iv_icarg;
680
681         SYSIO_WRITE8(sica->sica_sc, sica->sica_map, iv->iv_vec);
682 }
683
684 static void
685 sbus_intr_assign(void *arg)
686 {
687         struct intr_vector *iv = arg;
688         struct sbus_icarg *sica = iv->iv_icarg;
689
690         SYSIO_WRITE8(sica->sica_sc, sica->sica_map, INTMAP_TID(
691             SYSIO_READ8(sica->sica_sc, sica->sica_map), iv->iv_mid));
692 }
693
694 static void
695 sbus_intr_clear(void *arg)
696 {
697         struct intr_vector *iv = arg;
698         struct sbus_icarg *sica = iv->iv_icarg;
699
700         SYSIO_WRITE8(sica->sica_sc, sica->sica_clr, INTCLR_IDLE);
701 }
702
703 static int
704 sbus_find_intrmap(struct sbus_softc *sc, u_int ino, bus_addr_t *intrmapptr,
705     bus_addr_t *intrclrptr)
706 {
707         bus_addr_t intrclr, intrmap;
708         int i;
709
710         if (ino > SBUS_MAX_INO) {
711                 device_printf(sc->sc_dev, "out of range INO %d requested\n",
712                     ino);
713                 return (0);
714         }
715
716         if ((ino & INTMAP_OBIO_MASK) == 0) {
717                 intrmap = SBR_SLOT0_INT_MAP + INTSLOT(ino) * 8;
718                 intrclr = SBR_SLOT0_INT_CLR +
719                     (INTSLOT(ino) * 8 * 8) + (INTPRI(ino) * 8);
720         } else {
721                 intrclr = 0;
722                 for (i = 0, intrmap = SBR_SCSI_INT_MAP;
723                     intrmap <= SBR_RESERVED_INT_MAP; intrmap += 8, i++) {
724                         if (INTVEC(SYSIO_READ8(sc, intrmap)) ==
725                             INTMAP_VEC(sc->sc_ign, ino)) {
726                                 intrclr = SBR_SCSI_INT_CLR + i * 8;
727                                 break;
728                         }
729                 }
730                 if (intrclr == 0)
731                         return (0);
732         }
733         if (intrmapptr != NULL)
734                 *intrmapptr = intrmap;
735         if (intrclrptr != NULL)
736                 *intrclrptr = intrclr;
737         return (1);
738 }
739
740 static int
741 sbus_setup_intr(device_t dev, device_t child, struct resource *ires, int flags,
742     driver_filter_t *filt, driver_intr_t *intr, void *arg, void **cookiep)
743 {
744         struct sbus_softc *sc;
745         u_long vec;
746
747         sc = device_get_softc(dev);
748         /*
749          * Make sure the vector is fully specified and we registered
750          * our interrupt controller for it.
751          */
752         vec = rman_get_start(ires);
753         if (INTIGN(vec) != sc->sc_ign || intr_vectors[vec].iv_ic != &sbus_ic) {
754                 device_printf(dev, "invalid interrupt vector 0x%lx\n", vec);
755                 return (EINVAL);
756         }
757         return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr,
758             arg, cookiep));
759 }
760
761 static struct resource *
762 sbus_alloc_resource(device_t bus, device_t child, int type, int *rid,
763     u_long start, u_long end, u_long count, u_int flags)
764 {
765         struct sbus_softc *sc;
766         struct rman *rm;
767         struct resource *rv;
768         struct resource_list *rl;
769         struct resource_list_entry *rle;
770         device_t schild;
771         bus_space_handle_t bh;
772         bus_addr_t toffs;
773         bus_size_t tend;
774         int i, slot;
775         int isdefault, needactivate, passthrough;
776
777         isdefault = (start == 0UL && end == ~0UL);
778         needactivate = flags & RF_ACTIVE;
779         passthrough = (device_get_parent(child) != bus);
780         rle = NULL;
781         sc = device_get_softc(bus);
782         rl = BUS_GET_RESOURCE_LIST(bus, child);
783         switch (type) {
784         case SYS_RES_IRQ:
785                 return (resource_list_alloc(rl, bus, child, type, rid, start,
786                     end, count, flags));
787         case SYS_RES_MEMORY:
788                 if (!passthrough) {
789                         rle = resource_list_find(rl, type, *rid);
790                         if (rle == NULL)
791                                 return (NULL);
792                         if (rle->res != NULL)
793                                 panic("%s: resource entry is busy", __func__);
794                         if (isdefault) {
795                                 start = rle->start;
796                                 count = ulmax(count, rle->count);
797                                 end = ulmax(rle->end, start + count - 1);
798                         }
799                 }
800                 rm = NULL;
801                 bh = toffs = tend = 0;
802                 schild = child;
803                 while (device_get_parent(schild) != bus)
804                         schild = device_get_parent(schild);
805                 slot = sbus_get_slot(schild);
806                 for (i = 0; i < sc->sc_nrange; i++) {
807                         if (sc->sc_rd[i].rd_slot != slot ||
808                             start < sc->sc_rd[i].rd_coffset ||
809                             start > sc->sc_rd[i].rd_cend)
810                                 continue;
811                         /* Disallow cross-range allocations. */
812                         if (end > sc->sc_rd[i].rd_cend)
813                                 return (NULL);
814                         /* We've found the connection to the parent bus */
815                         toffs = start - sc->sc_rd[i].rd_coffset;
816                         tend = end - sc->sc_rd[i].rd_coffset;
817                         rm = &sc->sc_rd[i].rd_rman;
818                         bh = sc->sc_rd[i].rd_bushandle;
819                         break;
820                 }
821                 if (rm == NULL)
822                         return (NULL);
823                 flags &= ~RF_ACTIVE;
824                 rv = rman_reserve_resource(rm, toffs, tend, count, flags,
825                     child);
826                 if (rv == NULL)
827                         return (NULL);
828                 rman_set_rid(rv, *rid);
829                 rman_set_bustag(rv, sc->sc_cbustag);
830                 rman_set_bushandle(rv, bh + rman_get_start(rv));
831                 if (needactivate) {
832                         if (bus_activate_resource(child, type, *rid, rv)) {
833                                 rman_release_resource(rv);
834                                 return (NULL);
835                         }
836                 }
837                 if (!passthrough)
838                         rle->res = rv;
839                 return (rv);
840         default:
841                 return (NULL);
842         }
843 }
844
845 static int
846 sbus_activate_resource(device_t bus, device_t child, int type, int rid,
847     struct resource *r)
848 {
849         void *p;
850         int error;
851
852         if (type == SYS_RES_IRQ) {
853                 return (BUS_ACTIVATE_RESOURCE(device_get_parent(bus),
854                     child, type, rid, r));
855         }
856         if (type == SYS_RES_MEMORY) {
857                 /*
858                  * Need to memory-map the device space, as some drivers
859                  * depend on the virtual address being set and usable.
860                  */
861                 error = sparc64_bus_mem_map(rman_get_bustag(r),
862                     rman_get_bushandle(r), rman_get_size(r), 0, 0, &p);
863                 if (error != 0)
864                         return (error);
865                 rman_set_virtual(r, p);
866         }
867         return (rman_activate_resource(r));
868 }
869
870 static int
871 sbus_deactivate_resource(device_t bus, device_t child, int type, int rid,
872     struct resource *r)
873 {
874
875         if (type == SYS_RES_IRQ) {
876                 return (BUS_DEACTIVATE_RESOURCE(device_get_parent(bus),
877                     child, type, rid, r));
878         }
879         if (type == SYS_RES_MEMORY) {
880                 sparc64_bus_mem_unmap(rman_get_virtual(r), rman_get_size(r));
881                 rman_set_virtual(r, NULL);
882         }
883         return (rman_deactivate_resource(r));
884 }
885
886 static int
887 sbus_release_resource(device_t bus, device_t child, int type, int rid,
888     struct resource *r)
889 {
890         struct resource_list *rl;
891         struct resource_list_entry *rle;
892         int error, passthrough;
893
894         passthrough = (device_get_parent(child) != bus);
895         rl = BUS_GET_RESOURCE_LIST(bus, child);
896         if (type == SYS_RES_IRQ)
897                 return (resource_list_release(rl, bus, child, type, rid, r));
898         if ((rman_get_flags(r) & RF_ACTIVE) != 0) {
899                 error = bus_deactivate_resource(child, type, rid, r);
900                 if (error != 0)
901                         return (error);
902         }
903         error = rman_release_resource(r);
904         if (error != 0 || passthrough)
905                 return (error);
906         rle = resource_list_find(rl, type, rid);
907         if (rle == NULL)
908                 panic("%s: cannot find resource", __func__);
909         if (rle->res == NULL)
910                 panic("%s: resource entry is not busy", __func__);
911         rle->res = NULL;
912         return (0);
913 }
914
915 static bus_dma_tag_t
916 sbus_get_dma_tag(device_t bus, device_t child)
917 {
918         struct sbus_softc *sc;
919
920         sc = device_get_softc(bus);
921         return (sc->sc_cdmatag);
922 }
923
924 static const struct ofw_bus_devinfo *
925 sbus_get_devinfo(device_t bus, device_t child)
926 {
927         struct sbus_devinfo *sdi;
928
929         sdi = device_get_ivars(child);
930         return (&sdi->sdi_obdinfo);
931 }
932
933 /*
934  * Handle an overtemp situation.
935  *
936  * SPARCs have temperature sensors which generate interrupts
937  * if the machine's temperature exceeds a certain threshold.
938  * This handles the interrupt and powers off the machine.
939  * The same needs to be done to PCI controller drivers.
940  */
941 static void
942 sbus_overtemp(void *arg)
943 {
944         static int shutdown;
945
946         /* As the interrupt is cleared we may be called multiple times. */
947         if (shutdown != 0)
948                 return;
949         shutdown++;
950         printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n");
951         shutdown_nice(RB_POWEROFF);
952 }
953
954 /* Try to shut down in time in case of power failure. */
955 static void
956 sbus_pwrfail(void *arg)
957 {
958         static int shutdown;
959
960         /* As the interrupt is cleared we may be called multiple times. */
961         if (shutdown != 0)
962                 return;
963         shutdown++;
964         printf("Power failure detected\nShutting down NOW.\n");
965         shutdown_nice(0);
966 }
967
968 static bus_space_tag_t
969 sbus_alloc_bustag(struct sbus_softc *sc)
970 {
971         bus_space_tag_t sbt;
972
973         sbt = (bus_space_tag_t)malloc(sizeof(struct bus_space_tag), M_DEVBUF,
974             M_NOWAIT | M_ZERO);
975         if (sbt == NULL)
976                 panic("%s: out of memory", __func__);
977
978         sbt->bst_cookie = sc;
979         sbt->bst_parent = rman_get_bustag(sc->sc_sysio_res);
980         sbt->bst_type = SBUS_BUS_SPACE;
981         return (sbt);
982 }
983
984 static int
985 sbus_print_res(struct sbus_devinfo *sdi)
986 {
987         int rv;
988
989         rv = 0;
990         rv += resource_list_print_type(&sdi->sdi_rl, "mem", SYS_RES_MEMORY,
991             "%#lx");
992         rv += resource_list_print_type(&sdi->sdi_rl, "irq", SYS_RES_IRQ,
993             "%ld");
994         return (rv);
995 }