]> CyberLeo.Net >> Repos - FreeBSD/releng/8.1.git/blob - usr.sbin/config/config.8
Copy stable/8 to releng/8.1 in preparation for 8.1-RC1.
[FreeBSD/releng/8.1.git] / usr.sbin / config / config.8
1 .\" Copyright (c) 1980, 1991, 1993
2 .\"     The Regents of the University of California.  All rights reserved.
3 .\"
4 .\" Redistribution and use in source and binary forms, with or without
5 .\" modification, are permitted provided that the following conditions
6 .\" are met:
7 .\" 1. Redistributions of source code must retain the above copyright
8 .\"    notice, this list of conditions and the following disclaimer.
9 .\" 2. Redistributions in binary form must reproduce the above copyright
10 .\"    notice, this list of conditions and the following disclaimer in the
11 .\"    documentation and/or other materials provided with the distribution.
12 .\" 4. Neither the name of the University nor the names of its contributors
13 .\"    may be used to endorse or promote products derived from this software
14 .\"    without specific prior written permission.
15 .\"
16 .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
17 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
20 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26 .\" SUCH DAMAGE.
27 .\"
28 .\"     @(#)config.8    8.2 (Berkeley) 4/19/94
29 .\" $FreeBSD$
30 .\"
31 .Dd May 8, 2007
32 .Dt CONFIG 8
33 .Os
34 .Sh NAME
35 .Nm config
36 .Nd build system configuration files
37 .Sh SYNOPSIS
38 .Nm
39 .Op Fl CVgp
40 .Op Fl d Ar destdir
41 .Ar SYSTEM_NAME
42 .Nm
43 .Op Fl x Ar kernel
44 .Sh DESCRIPTION
45 The
46 .Nm
47 utility builds a set of system configuration files from the file
48 .Ar SYSTEM_NAME
49 which describes
50 the system to configure.
51 A second file
52 tells
53 .Nm
54 what files are needed to generate a system and
55 can be augmented by configuration specific set of files
56 that give alternate files for a specific machine
57 (see the
58 .Sx FILES
59 section below).
60 .Pp
61 Available options and operands:
62 .Bl -tag -width ".Ar SYSTEM_NAME"
63 .It Fl V
64 Print the
65 .Nm
66 version number.
67 .It Fl C
68 If the INCLUDE_CONFIG_FILE is present in a configuration file,
69 kernel image will contain full configuration files included
70 literally (preserving comments).
71 This flag is kept for backward compatibility.
72 .It Fl d Ar destdir
73 Use
74 .Ar destdir
75 as the output directory, instead of the default one.
76 Note that
77 .Nm
78 does not append
79 .Ar SYSTEM_NAME
80 to the directory given.
81 .It Fl g
82 Configure a system for debugging.
83 .It Fl x Ar kernel
84 Print kernel configuration file embedded into a kernel
85 file.
86 This option makes sense only if 
87 .Cd "options INCLUDE_CONFIG_FILE"
88 entry was present in your configuration file.
89 .It Fl p
90 Configure a system for profiling; for example,
91 .Xr kgmon 8
92 and
93 .Xr gprof 1 .
94 If two or more
95 .Fl p
96 options are supplied,
97 .Nm
98 configures a system for high resolution profiling.
99 .It Ar SYSTEM_NAME
100 Specify the name of the system configuration file
101 containing device specifications, configuration options
102 and other system parameters for one system configuration.
103 .El
104 .Pp
105 The
106 .Nm
107 utility should be run from the
108 .Pa conf
109 subdirectory of the system source (usually
110 .Pa /sys/ Ns Va ARCH Ns Pa /conf ) ,
111 where
112 .Va ARCH
113 represents one of the architectures supported by
114 .Fx .
115 The
116 .Nm
117 utility creates the directory
118 .Pa ../compile/ Ns Ar SYSTEM_NAME
119 or the one given with the
120 .Fl d
121 option
122 as necessary and places all output files there.
123 The output of
124 .Nm
125 consists of a number of files; for the
126 .Tn i386 ,
127 they are:
128 .Pa Makefile ,
129 used by
130 .Xr make 1
131 in building the system;
132 header files,
133 definitions of
134 the number of various devices that will be compiled into the system.
135 .Pp
136 After running
137 .Nm ,
138 it is necessary to run
139 .Dq Li make depend
140 in the directory where the new makefile
141 was created.
142 The
143 .Nm
144 utility prints a reminder of this when it completes.
145 .Pp
146 If any other error messages are produced by
147 .Nm ,
148 the problems in the configuration file should be corrected and
149 .Nm
150 should be run again.
151 Attempts to compile a system that had configuration errors
152 are likely to fail.
153 .Sh DEBUG KERNELS
154 Traditional
155 .Bx
156 kernels are compiled without symbols due to the heavy load on the
157 system when compiling a
158 .Dq debug
159 kernel.
160 A debug kernel contains complete symbols for all the source files, and
161 enables an experienced kernel programmer to analyse the cause of a problem.
162 The
163 debuggers available prior to
164 .Bx 4.4 Lite
165 were able to find some information
166 from a normal kernel;
167 .Xr gdb 1
168 provides very little support for normal kernels, and a debug kernel is needed
169 for any meaningful analysis.
170 .Pp
171 For reasons of history, time and space, building a debug kernel is not the
172 default with
173 .Fx :
174 a debug kernel takes up to 30% longer to build and
175 requires about 30 MB of disk storage in the build directory, compared to about 6
176 MB for a non-debug kernel.
177 A debug kernel is about 11 MB in size, compared to
178 about 2 MB for a non-debug kernel.
179 This space is used both in the root file
180 system and at run time in memory.
181 Use the
182 .Fl g
183 option to build a debug kernel.
184 With this option,
185 .Nm
186 causes two kernel files to be built in the kernel build directory:
187 .Bl -bullet
188 .It
189 .Pa kernel.debug
190 is the complete debug kernel.
191 .It
192 .Pa kernel
193 is a copy of the kernel with the debug symbols stripped off.
194 This is equivalent
195 to the normal non-debug kernel.
196 .El
197 .Pp
198 There is currently little sense in installing and booting from a debug kernel,
199 since the only tools available which use the symbols do not run on-line.
200 There
201 are therefore two options for installing a debug kernel:
202 .Bl -bullet
203 .It
204 .Dq Li "make install"
205 installs
206 .Pa kernel
207 in the root file system.
208 .It
209 .Dq Li "make install.debug"
210 installs
211 .Pa kernel.debug
212 in the root file system.
213 .El
214 .Sh FILES
215 .Bl -tag -width ".Pa /sys/ Ns Va ARCH Ns Pa /compile/ Ns Ar SYSTEM_NAME" -compact
216 .It Pa /sys/conf/files
217 list of common files system is built from
218 .It Pa /sys/conf/Makefile. Ns Va ARCH
219 generic makefile for the
220 .Va ARCH
221 .It Pa /sys/conf/files. Ns Va ARCH
222 list of
223 .Va ARCH
224 specific files
225 .It Pa /sys/ Ns Va ARCH Ns Pa /compile/ Ns Ar SYSTEM_NAME
226 default kernel build directory for system
227 .Ar SYSTEM_NAME
228 on
229 .Va ARCH .
230 .El
231 .Sh SEE ALSO
232 .Xr config 5
233 .Pp
234 The
235 .Sx SYNOPSIS
236 portion of each device in section 4.
237 .Rs
238 .%T "Building 4.3 BSD UNIX System with Config"
239 .Re
240 .Sh HISTORY
241 The
242 .Nm
243 utility appeared in
244 .Bx 4.1 .
245 .Pp
246 Before support for 
247 .Fl x
248 was introduced,
249 .Cd "options INCLUDE_CONFIG_FILE"
250 included entire configuration file that used to be embedded in
251 the new kernel.
252 This meant that
253 .Xr strings 1
254 could be used to extract it from a kernel:
255 to extract the configuration information, you had to use 
256 the command:
257 .Pp
258 .Dl "strings -n 3 kernel | sed -n 's/^___//p'"
259 .Sh BUGS
260 The line numbers reported in error messages are usually off by one.