usr.sbin/iostat/iostat.c

   1 /*
   2  * Copyright (c) 1997, 1998, 2000, 2001  Kenneth D. Merry
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  * 3. The name of the author may not be used to endorse or promote products
  14  *    derived from this software without specific prior written permission.
  15  *
  16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  26  * SUCH DAMAGE.
  27  *
  28  * $FreeBSD$
  29  */
  30 /*
  31  * Parts of this program are derived from the original FreeBSD iostat
  32  * program:
  33  */
  34 /*-
  35  * Copyright (c) 1986, 1991, 1993
  36  *      The Regents of the University of California.  All rights reserved.
  37  *
  38  * Redistribution and use in source and binary forms, with or without
  39  * modification, are permitted provided that the following conditions
  40  * are met:
  41  * 1. Redistributions of source code must retain the above copyright
  42  *    notice, this list of conditions and the following disclaimer.
  43  * 2. Redistributions in binary form must reproduce the above copyright
  44  *    notice, this list of conditions and the following disclaimer in the
  45  *    documentation and/or other materials provided with the distribution.
  46  * 3. All advertising materials mentioning features or use of this software
  47  *    must display the following acknowledgement:
  48  *      This product includes software developed by the University of
  49  *      California, Berkeley and its contributors.
  50  * 4. Neither the name of the University nor the names of its contributors
  51  *    may be used to endorse or promote products derived from this software
  52  *    without specific prior written permission.
  53  *
  54  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
  55  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  56  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  57  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
  58  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  59  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  60  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  61  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  62  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  63  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  64  * SUCH DAMAGE.
  65  */
  66 /*
  67  * Ideas for the new iostat statistics output modes taken from the NetBSD
  68  * version of iostat:
  69  */
  70 /*
  71  * Copyright (c) 1996 John M. Vinopal
  72  * All rights reserved.
  73  *
  74  * Redistribution and use in source and binary forms, with or without
  75  * modification, are permitted provided that the following conditions
  76  * are met:
  77  * 1. Redistributions of source code must retain the above copyright
  78  *    notice, this list of conditions and the following disclaimer.
  79  * 2. Redistributions in binary form must reproduce the above copyright
  80  *    notice, this list of conditions and the following disclaimer in the
  81  *    documentation and/or other materials provided with the distribution.
  82  * 3. All advertising materials mentioning features or use of this software
  83  *    must display the following acknowledgement:
  84  *      This product includes software developed for the NetBSD Project
  85  *      by John M. Vinopal.
  86  * 4. The name of the author may not be used to endorse or promote products
  87  *    derived from this software without specific prior written permission.
  88  *
  89  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
  90  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  91  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  92  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
  93  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
  94  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  95  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
  96  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  97  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  98  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  99  * SUCH DAMAGE.
 100  */
 101
 102
 103 #include <sys/param.h>
 104 #include <sys/errno.h>
 105 #include <sys/resource.h>
 106 #include <sys/sysctl.h>
 107
 108 #include <err.h>
 109 #include <ctype.h>
 110 #include <fcntl.h>
 111 #include <kvm.h>
 112 #include <nlist.h>
 113 #include <stdio.h>
 114 #include <stdlib.h>
 115 #include <string.h>
 116 #include <termios.h>
 117 #include <unistd.h>
 118 #include <limits.h>
 119 #include <devstat.h>
 120 #include <math.h>
 121
 122 struct nlist namelist[] = {
 123 #define X_TK_NIN        0
 124         { "_tk_nin" },
 125 #define X_TK_NOUT       1
 126         { "_tk_nout" },
 127 #define X_BOOTTIME      2
 128         { "_boottime" },
 129 #define X_END           2
 130         { NULL },
 131 };
 132
 133 #define IOSTAT_DEFAULT_ROWS     20      /* Traditional default `wrows' */
 134
 135 struct statinfo cur, last;
 136 int num_devices;
 137 struct device_selection *dev_select;
 138 int maxshowdevs;
 139 volatile sig_atomic_t headercount;
 140 volatile sig_atomic_t wresized;         /* Tty resized, when non-zero. */
 141 unsigned short wrows;                   /* Current number of tty rows. */
 142 int dflag = 0, Iflag = 0, Cflag = 0, Tflag = 0, oflag = 0, Kflag = 0;
 143 int xflag = 0, zflag = 0;
 144
 145 /* local function declarations */
 146 static void usage(void);
 147 static void needhdr(int signo);
 148 static void needresize(int signo);
 149 static void doresize(void);
 150 static void phdr(void);
 151 static void devstats(int perf_select, long double etime, int havelast);
 152 static void cpustats(void);
 153 static int readvar(kvm_t *kd, const char *name, int nlid, void *ptr,
 154                    size_t len);
 155
 156 static void
 157 usage(void)
 158 {
 159         /*
 160          * We also support the following 'traditional' syntax:
 161          * iostat [drives] [wait [count]]
 162          * This isn't mentioned in the man page, or the usage statement,
 163          * but it is supported.
 164          */
 165         fprintf(stderr, "usage: iostat [-CdhIKoTxz?] [-c count] [-M core]"
 166                 " [-n devs] [-N system]\n"
 167                 "\t      [-t type,if,pass] [-w wait] [drives]\n");
 168 }
 169
 170 int
 171 main(int argc, char **argv)
 172 {
 173         int c, i;
 174         int tflag = 0, hflag = 0, cflag = 0, wflag = 0, nflag = 0;
 175         int count = 0, waittime = 0;
 176         char *memf = NULL, *nlistf = NULL;
 177         struct devstat_match *matches;
 178         int num_matches = 0;
 179         char errbuf[_POSIX2_LINE_MAX];
 180         kvm_t *kd = NULL;
 181         long generation;
 182         int num_devices_specified;
 183         int num_selected, num_selections;
 184         long select_generation;
 185         char **specified_devices;
 186         devstat_select_mode select_mode;
 187         int havelast = 0;
 188
 189         matches = NULL;
 190         maxshowdevs = 3;
 191
 192         while ((c = getopt(argc, argv, "c:CdhIKM:n:N:ot:Tw:xz?")) != -1) {
 193                 switch(c) {
 194                         case 'c':
 195                                 cflag++;
 196                                 count = atoi(optarg);
 197                                 if (count < 1)
 198                                         errx(1, "count %d is < 1", count);
 199                                 break;
 200                         case 'C':
 201                                 Cflag++;
 202                                 break;
 203                         case 'd':
 204                                 dflag++;
 205                                 break;
 206                         case 'h':
 207                                 hflag++;
 208                                 break;
 209                         case 'I':
 210                                 Iflag++;
 211                                 break;
 212                         case 'K':
 213                                 Kflag++;
 214                                 break;
 215                         case 'M':
 216                                 memf = optarg;
 217                                 break;
 218                         case 'n':
 219                                 nflag++;
 220                                 maxshowdevs = atoi(optarg);
 221                                 if (maxshowdevs < 0)
 222                                         errx(1, "number of devices %d is < 0",
 223                                              maxshowdevs);
 224                                 break;
 225                         case 'N':
 226                                 nlistf = optarg;
 227                                 break;
 228                         case 'o':
 229                                 oflag++;
 230                                 break;
 231                         case 't':
 232                                 tflag++;
 233                                 if (devstat_buildmatch(optarg, &matches,
 234                                                        &num_matches) != 0)
 235                                         errx(1, "%s", devstat_errbuf);
 236                                 break;
 237                         case 'T':
 238                                 Tflag++;
 239                                 break;
 240                         case 'w':
 241                                 wflag++;
 242                                 waittime = atoi(optarg);
 243                                 if (waittime < 1)
 244                                         errx(1, "wait time is < 1");
 245                                 break;
 246                         case 'x':
 247                                 xflag++;
 248                                 break;
 249                         case 'z':
 250                                 zflag++;
 251                                 break;
 252                         default:
 253                                 usage();
 254                                 exit(1);
 255                                 break;
 256                 }
 257         }
 258
 259         argc -= optind;
 260         argv += optind;
 261
 262         if (nlistf != NULL || memf != NULL) {
 263                 kd = kvm_openfiles(nlistf, memf, NULL, O_RDONLY, errbuf);
 264
 265                 if (kd == NULL)
 266                         errx(1, "kvm_openfiles: %s", errbuf);
 267
 268                 if (kvm_nlist(kd, namelist) == -1)
 269                         errx(1, "kvm_nlist: %s", kvm_geterr(kd));
 270         }
 271
 272         /*
 273          * Make sure that the userland devstat version matches the kernel
 274          * devstat version.  If not, exit and print a message informing
 275          * the user of his mistake.
 276          */
 277         if (devstat_checkversion(kd) < 0)
 278                 errx(1, "%s", devstat_errbuf);
 279
 280         /*
 281          * Make sure Tflag and/or Cflag are set if dflag == 0.  If dflag is
 282          * greater than 0, they may be 0 or non-zero.
 283          */
 284         if (dflag == 0 && xflag == 0) {
 285                 Cflag = 1;
 286                 Tflag = 1;
 287         }
 288
 289         /* find out how many devices we have */
 290         if ((num_devices = devstat_getnumdevs(kd)) < 0)
 291                 err(1, "can't get number of devices");
 292
 293         /*
 294          * Figure out how many devices we should display.
 295          */
 296         if (nflag == 0) {
 297                 if (xflag > 0)
 298                         maxshowdevs = num_devices;
 299                 else if (oflag > 0) {
 300                         if ((dflag > 0) && (Cflag == 0) && (Tflag == 0))
 301                                 maxshowdevs = 5;
 302                         else if ((dflag > 0) && (Tflag > 0) && (Cflag == 0))
 303                                 maxshowdevs = 5;
 304                         else
 305                                 maxshowdevs = 4;
 306                 } else {
 307                         if ((dflag > 0) && (Cflag == 0))
 308                                 maxshowdevs = 4;
 309                         else
 310                                 maxshowdevs = 3;
 311                 }
 312         }
 313
 314         cur.dinfo = (struct devinfo *)calloc(1, sizeof(struct devinfo));
 315         if (cur.dinfo == NULL)
 316                 err(1, "calloc failed");
 317
 318         last.dinfo = (struct devinfo *)calloc(1, sizeof(struct devinfo));
 319         if (last.dinfo == NULL)
 320                 err(1, "calloc failed");
 321
 322         /*
 323          * Grab all the devices.  We don't look to see if the list has
 324          * changed here, since it almost certainly has.  We only look for
 325          * errors.
 326          */
 327         if (devstat_getdevs(kd, &cur) == -1)
 328                 errx(1, "%s", devstat_errbuf);
 329
 330         num_devices = cur.dinfo->numdevs;
 331         generation = cur.dinfo->generation;
 332
 333         /*
 334          * If the user specified any devices on the command line, see if
 335          * they are in the list of devices we have now.
 336          */
 337         specified_devices = (char **)malloc(sizeof(char *));
 338         if (specified_devices == NULL)
 339                 err(1, "malloc failed");
 340
 341         for (num_devices_specified = 0; *argv; ++argv) {
 342                 if (isdigit(**argv))
 343                         break;
 344                 num_devices_specified++;
 345                 specified_devices = (char **)realloc(specified_devices,
 346                                                      sizeof(char *) *
 347                                                      num_devices_specified);
 348                 if (specified_devices == NULL)
 349                         err(1, "realloc failed");
 350
 351                 specified_devices[num_devices_specified - 1] = *argv;
 352
 353         }
 354         if (nflag == 0 && maxshowdevs < num_devices_specified)
 355                 maxshowdevs = num_devices_specified;
 356
 357         dev_select = NULL;
 358
 359         if ((num_devices_specified == 0) && (num_matches == 0))
 360                 select_mode = DS_SELECT_ADD;
 361         else
 362                 select_mode = DS_SELECT_ONLY;
 363
 364         /*
 365          * At this point, selectdevs will almost surely indicate that the
 366          * device list has changed, so we don't look for return values of 0
 367          * or 1.  If we get back -1, though, there is an error.
 368          */
 369         if (devstat_selectdevs(&dev_select, &num_selected,
 370                                &num_selections, &select_generation, generation,
 371                                cur.dinfo->devices, num_devices, matches,
 372                                num_matches, specified_devices,
 373                                num_devices_specified, select_mode, maxshowdevs,
 374                                hflag) == -1)
 375                 errx(1, "%s", devstat_errbuf);
 376
 377         /*
 378          * Look for the traditional wait time and count arguments.
 379          */
 380         if (*argv) {
 381                 waittime = atoi(*argv);
 382
 383                 /* Let the user know he goofed, but keep going anyway */
 384                 if (wflag != 0)
 385                         warnx("discarding previous wait interval, using"
 386                               " %d instead", waittime);
 387                 wflag++;
 388
 389                 if (*++argv) {
 390                         count = atoi(*argv);
 391                         if (cflag != 0)
 392                                 warnx("discarding previous count, using %d"
 393                                       " instead", count);
 394                         cflag++;
 395                 } else
 396                         count = -1;
 397         }
 398
 399         /*
 400          * If the user specified a count, but not an interval, we default
 401          * to an interval of 1 second.
 402          */
 403         if ((wflag == 0) && (cflag > 0))
 404                 waittime = 1;
 405
 406         /*
 407          * If the user specified a wait time, but not a count, we want to
 408          * go on ad infinitum.  This can be redundant if the user uses the
 409          * traditional method of specifying the wait, since in that case we
 410          * already set count = -1 above.  Oh well.
 411          */
 412         if ((wflag > 0) && (cflag == 0))
 413                 count = -1;
 414
 415         bzero(cur.cp_time, sizeof(cur.cp_time));
 416         cur.tk_nout = 0;
 417         cur.tk_nin = 0;
 418
 419         /*
 420          * Set the snap time to the system boot time (ie: zero), so the
 421          * stats are calculated since system boot.
 422          */
 423         cur.snap_time = 0;
 424
 425         /*
 426          * If the user stops the program (control-Z) and then resumes it,
 427          * print out the header again.
 428          */
 429         (void)signal(SIGCONT, needhdr);
 430
 431         /*
 432          * If our standard output is a tty, then install a SIGWINCH handler
 433          * and set wresized so that our first iteration through the main
 434          * iostat loop will peek at the terminal's current rows to find out
 435          * how many lines can fit in a screenful of output.
 436          */
 437         if (isatty(fileno(stdout)) != 0) {
 438                 wresized = 1;
 439                 (void)signal(SIGWINCH, needresize);
 440         } else {
 441                 wresized = 0;
 442                 wrows = IOSTAT_DEFAULT_ROWS;
 443         }
 444
 445         for (headercount = 1;;) {
 446                 struct devinfo *tmp_dinfo;
 447                 long tmp;
 448                 long double etime;
 449
 450                 if (Tflag > 0) {
 451                         if ((readvar(kd, "kern.tty_nin", X_TK_NIN, &cur.tk_nin,
 452                              sizeof(cur.tk_nin)) != 0)
 453                          || (readvar(kd, "kern.tty_nout", X_TK_NOUT,
 454                              &cur.tk_nout, sizeof(cur.tk_nout))!= 0)) {
 455                                 Tflag = 0;
 456                                 warnx("disabling TTY statistics");
 457                         }
 458                  }
 459
 460                 if (Cflag > 0) {
 461                         if (kd == NULL) {
 462                                 if (readvar(kd, "kern.cp_time", 0,
 463                                     &cur.cp_time, sizeof(cur.cp_time)) != 0)
 464                                         Cflag = 0;
 465                         } else {
 466                                 if (kvm_getcptime(kd, cur.cp_time) < 0) {
 467                                         warnx("kvm_getcptime: %s",
 468                                             kvm_geterr(kd));
 469                                         Cflag = 0;
 470                                 }
 471                         }
 472                         if (Cflag == 0)
 473                                 warnx("disabling CPU time statistics");
 474                 }
 475
 476                 if (!--headercount) {
 477                         phdr();
 478                         if (wresized != 0)
 479                                 doresize();
 480                         headercount = wrows;
 481                 }
 482
 483                 tmp_dinfo = last.dinfo;
 484                 last.dinfo = cur.dinfo;
 485                 cur.dinfo = tmp_dinfo;
 486
 487                 last.snap_time = cur.snap_time;
 488
 489                 /*
 490                  * Here what we want to do is refresh our device stats.
 491                  * devstat_getdevs() returns 1 when the device list has changed.
 492                  * If the device list has changed, we want to go through
 493                  * the selection process again, in case a device that we
 494                  * were previously displaying has gone away.
 495                  */
 496                 switch (devstat_getdevs(kd, &cur)) {
 497                 case -1:
 498                         errx(1, "%s", devstat_errbuf);
 499                         break;
 500                 case 1: {
 501                         int retval;
 502
 503                         num_devices = cur.dinfo->numdevs;
 504                         generation = cur.dinfo->generation;
 505                         retval = devstat_selectdevs(&dev_select, &num_selected,
 506                                                     &num_selections,
 507                                                     &select_generation,
 508                                                     generation,
 509                                                     cur.dinfo->devices,
 510                                                     num_devices, matches,
 511                                                     num_matches,
 512                                                     specified_devices,
 513                                                     num_devices_specified,
 514                                                     select_mode, maxshowdevs,
 515                                                     hflag);
 516                         switch(retval) {
 517                         case -1:
 518                                 errx(1, "%s", devstat_errbuf);
 519                                 break;
 520                         case 1:
 521                                 phdr();
 522                                 if (wresized != 0)
 523                                         doresize();
 524                                 headercount = wrows;
 525                                 break;
 526                         default:
 527                                 break;
 528                         }
 529                         break;
 530                 }
 531                 default:
 532                         break;
 533                 }
 534
 535                 /*
 536                  * We only want to re-select devices if we're in 'top'
 537                  * mode.  This is the only mode where the devices selected
 538                  * could actually change.
 539                  */
 540                 if (hflag > 0) {
 541                         int retval;
 542                         retval = devstat_selectdevs(&dev_select, &num_selected,
 543                                                     &num_selections,
 544                                                     &select_generation,
 545                                                     generation,
 546                                                     cur.dinfo->devices,
 547                                                     num_devices, matches,
 548                                                     num_matches,
 549                                                     specified_devices,
 550                                                     num_devices_specified,
 551                                                     select_mode, maxshowdevs,
 552                                                     hflag);
 553                         switch(retval) {
 554                         case -1:
 555                                 errx(1,"%s", devstat_errbuf);
 556                                 break;
 557                         case 1:
 558                                 phdr();
 559                                 if (wresized != 0)
 560                                         doresize();
 561                                 headercount = wrows;
 562                                 break;
 563                         default:
 564                                 break;
 565                         }
 566                 }
 567
 568                 if (Tflag > 0) {
 569                         tmp = cur.tk_nin;
 570                         cur.tk_nin -= last.tk_nin;
 571                         last.tk_nin = tmp;
 572                         tmp = cur.tk_nout;
 573                         cur.tk_nout -= last.tk_nout;
 574                         last.tk_nout = tmp;
 575                 }
 576
 577                 etime = cur.snap_time - last.snap_time;
 578
 579                 if (etime == 0.0)
 580                         etime = 1.0;
 581
 582                 for (i = 0; i < CPUSTATES; i++) {
 583                         tmp = cur.cp_time[i];
 584                         cur.cp_time[i] -= last.cp_time[i];
 585                         last.cp_time[i] = tmp;
 586                 }
 587
 588                 if (xflag == 0 && Tflag > 0)
 589                         printf("%4.0Lf %5.0Lf", cur.tk_nin / etime,
 590                             cur.tk_nout / etime);
 591
 592                 devstats(hflag, etime, havelast);
 593
 594                 if (xflag == 0) {
 595                         if (Cflag > 0)
 596                                 cpustats();
 597
 598                         printf("\n");
 599                 }
 600                 fflush(stdout);
 601
 602                 if (count >= 0 && --count <= 0)
 603                         break;
 604
 605                 sleep(waittime);
 606                 havelast = 1;
 607         }
 608
 609         exit(0);
 610 }
 611
 612 /*
 613  * Force a header to be prepended to the next output.
 614  */
 615 void
 616 needhdr(int signo)
 617 {
 618
 619         headercount = 1;
 620 }
 621
 622 /*
 623  * When the terminal is resized, force an update of the maximum number of rows
 624  * printed between each header repetition.  Then force a new header to be
 625  * prepended to the next output.
 626  */
 627 void
 628 needresize(int signo)
 629 {
 630
 631         wresized = 1;
 632         headercount = 1;
 633 }
 634
 635 /*
 636  * Update the global `wrows' count of terminal rows.
 637  */
 638 void
 639 doresize(void)
 640 {
 641         int status;
 642         struct winsize w;
 643
 644         for (;;) {
 645                 status = ioctl(fileno(stdout), TIOCGWINSZ, &w);
 646                 if (status == -1 && errno == EINTR)
 647                         continue;
 648                 else if (status == -1)
 649                         err(1, "ioctl");
 650                 if (w.ws_row > 3)
 651                         wrows = w.ws_row - 3;
 652                 else
 653                         wrows = IOSTAT_DEFAULT_ROWS;
 654                 break;
 655         }
 656
 657         /*
 658          * Inhibit doresize() calls until we are rescheduled by SIGWINCH.
 659          */
 660         wresized = 0;
 661 }
 662
 663 static void
 664 phdr(void)
 665 {
 666         int i, printed;
 667         char devbuf[256];
 668
 669         /*
 670          * If xflag is set, we need a per-loop header, not a page header, so
 671          * just return.  We'll print the header in devstats().
 672          */
 673         if (xflag > 0)
 674                 return;
 675
 676         if (Tflag > 0)
 677                 (void)printf("       tty");
 678         for (i = 0, printed=0;(i < num_devices) && (printed < maxshowdevs);i++){
 679                 int di;
 680                 if ((dev_select[i].selected != 0)
 681                  && (dev_select[i].selected <= maxshowdevs)) {
 682                         di = dev_select[i].position;
 683                         snprintf(devbuf, sizeof(devbuf), "%s%d",
 684                                             cur.dinfo->devices[di].device_name,
 685                                             cur.dinfo->devices[di].unit_number);
 686                         if (oflag > 0)
 687                                 (void)printf("%13.6s ", devbuf);
 688                         else
 689                                 printf("%16.6s ", devbuf);
 690                         printed++;
 691                 }
 692         }
 693         if (Cflag > 0)
 694                 (void)printf("            cpu\n");
 695         else
 696                 (void)printf("\n");
 697
 698         if (Tflag > 0)
 699                 (void)printf(" tin  tout");
 700
 701         for (i=0, printed = 0;(i < num_devices) && (printed < maxshowdevs);i++){
 702                 if ((dev_select[i].selected != 0)
 703                  && (dev_select[i].selected <= maxshowdevs)) {
 704                         if (oflag > 0) {
 705                                 if (Iflag == 0)
 706                                         (void)printf(" sps tps msps ");
 707                                 else
 708                                         (void)printf(" blk xfr msps ");
 709                         } else {
 710                                 if (Iflag == 0)
 711                                         printf("  KB/t tps  MB/s ");
 712                                 else
 713                                         printf("  KB/t xfrs   MB ");
 714                         }
 715                         printed++;
 716                 }
 717         }
 718         if (Cflag > 0)
 719                 (void)printf(" us ni sy in id\n");
 720         else
 721                 printf("\n");
 722
 723 }
 724
 725 static void
 726 devstats(int perf_select, long double etime, int havelast)
 727 {
 728         int dn;
 729         long double transfers_per_second, transfers_per_second_read, transfers_per_second_write;
 730         long double kb_per_transfer, mb_per_second, mb_per_second_read, mb_per_second_write;
 731         u_int64_t total_bytes, total_transfers, total_blocks;
 732         u_int64_t total_bytes_read, total_transfers_read;
 733         u_int64_t total_bytes_write, total_transfers_write;
 734         long double busy_pct;
 735         u_int64_t queue_len;
 736         long double total_mb;
 737         long double blocks_per_second, ms_per_transaction;
 738         int firstline = 1;
 739         char *devname;
 740
 741         if (xflag > 0) {
 742                 printf("                        extended device statistics  ");
 743                 if (Tflag > 0)
 744                         printf("      tty ");
 745                 if (Cflag > 0)
 746                         printf("           cpu ");
 747                 printf("\n");
 748                 if (Iflag == 0)
 749                         printf(
 750                 "device     r/s   w/s    kr/s    kw/s wait svc_t  %%b  "
 751                             );
 752                 else
 753                         printf(
 754                 "device     r/i   w/i    kr/i    kw/i wait svc_t  %%b  "
 755                             );
 756                 if (Tflag > 0)
 757                         printf("tin  tout ");
 758                 if (Cflag > 0)
 759                         printf("us ni sy in id ");
 760                 printf("\n");
 761         }
 762
 763         for (dn = 0; dn < num_devices; dn++) {
 764                 int di;
 765
 766                 if (((perf_select == 0) && (dev_select[dn].selected == 0))
 767                  || (dev_select[dn].selected > maxshowdevs))
 768                         continue;
 769
 770                 di = dev_select[dn].position;
 771
 772                 if (devstat_compute_statistics(&cur.dinfo->devices[di],
 773                     havelast ? &last.dinfo->devices[di] : NULL, etime,
 774                     DSM_TOTAL_BYTES, &total_bytes,
 775                     DSM_TOTAL_BYTES_READ, &total_bytes_read,
 776                     DSM_TOTAL_BYTES_WRITE, &total_bytes_write,
 777                     DSM_TOTAL_TRANSFERS, &total_transfers,
 778                     DSM_TOTAL_TRANSFERS_READ, &total_transfers_read,
 779                     DSM_TOTAL_TRANSFERS_WRITE, &total_transfers_write,
 780                     DSM_TOTAL_BLOCKS, &total_blocks,
 781                     DSM_KB_PER_TRANSFER, &kb_per_transfer,
 782                     DSM_TRANSFERS_PER_SECOND, &transfers_per_second,
 783                     DSM_TRANSFERS_PER_SECOND_READ, &transfers_per_second_read,
 784                     DSM_TRANSFERS_PER_SECOND_WRITE, &transfers_per_second_write,
 785                     DSM_MB_PER_SECOND, &mb_per_second,
 786                     DSM_MB_PER_SECOND_READ, &mb_per_second_read,
 787                     DSM_MB_PER_SECOND_WRITE, &mb_per_second_write,
 788                     DSM_BLOCKS_PER_SECOND, &blocks_per_second,
 789                     DSM_MS_PER_TRANSACTION, &ms_per_transaction,
 790                     DSM_BUSY_PCT, &busy_pct,
 791                     DSM_QUEUE_LENGTH, &queue_len,
 792                     DSM_NONE) != 0)
 793                         errx(1, "%s", devstat_errbuf);
 794
 795                 if (perf_select != 0) {
 796                         dev_select[dn].bytes = total_bytes;
 797                         if ((dev_select[dn].selected == 0)
 798                          || (dev_select[dn].selected > maxshowdevs))
 799                                 continue;
 800                 }
 801
 802                 if (Kflag > 0 || xflag > 0) {
 803                         int block_size = cur.dinfo->devices[di].block_size;
 804                         total_blocks = total_blocks * (block_size ?
 805                                                        block_size : 512) / 1024;
 806                 }
 807
 808                 if (xflag > 0) {
 809                         if (asprintf(&devname, "%s%d",
 810                             cur.dinfo->devices[di].device_name,
 811                             cur.dinfo->devices[di].unit_number) == -1)
 812                                 err(1, "asprintf");
 813                         /*
 814                          * If zflag is set, skip any devices with zero I/O.
 815                          */
 816                         if (zflag == 0 || transfers_per_second_read > 0.05 ||
 817                             transfers_per_second_write > 0.05 ||
 818                             mb_per_second_read > ((long double).0005)/1024 ||
 819                             mb_per_second_write > ((long double).0005)/1024 ||
 820                             busy_pct > 0.5) {
 821                                 if (Iflag == 0)
 822                                         printf("%-8.8s %5.1Lf %5.1Lf %7.1Lf %7.1Lf %4qu %5.1Lf %3.0Lf ",
 823                                             devname, transfers_per_second_read,
 824                                             transfers_per_second_write,
 825                                             mb_per_second_read * 1024,
 826                                             mb_per_second_write * 1024,
 827                                             queue_len,
 828                                             ms_per_transaction, busy_pct);
 829                                 else
 830                                         printf("%-8.8s %5.1Lf %5.1Lf %7.1Lf %7.1Lf %4qu %5.1Lf %3.0Lf ",
 831                                             devname,
 832                                             (long double)total_transfers_read,
 833                                             (long double)total_transfers_write,
 834                                             (long double)
 835                                                 total_bytes_read / 1024,
 836                                             (long double)
 837                                                 total_bytes_write / 1024,
 838                                             queue_len,
 839                                             ms_per_transaction, busy_pct);
 840                                 if (firstline) {
 841                                         /*
 842                                          * If this is the first device
 843                                          * we're printing, also print
 844                                          * CPU or TTY stats if requested.
 845                                          */
 846                                         firstline = 0;
 847                                         if (Tflag > 0)
 848                                                 printf("%4.0Lf%5.0Lf",
 849                                                     cur.tk_nin / etime,
 850                                                     cur.tk_nout / etime);
 851                                         if (Cflag > 0)
 852                                                 cpustats();
 853                                 }
 854                                 printf("\n");
 855                         }
 856                         free(devname);
 857                 } else if (oflag > 0) {
 858                         int msdig = (ms_per_transaction < 100.0) ? 1 : 0;
 859
 860                         if (Iflag == 0)
 861                                 printf("%4.0Lf%4.0Lf%5.*Lf ",
 862                                        blocks_per_second,
 863                                        transfers_per_second,
 864                                        msdig,
 865                                        ms_per_transaction);
 866                         else
 867                                 printf("%4.1qu%4.1qu%5.*Lf ",
 868                                        total_blocks,
 869                                        total_transfers,
 870                                        msdig,
 871                                        ms_per_transaction);
 872                 } else {
 873                         if (Iflag == 0)
 874                                 printf(" %5.2Lf %3.0Lf %5.2Lf ",
 875                                        kb_per_transfer,
 876                                        transfers_per_second,
 877                                        mb_per_second);
 878                         else {
 879                                 total_mb = total_bytes;
 880                                 total_mb /= 1024 * 1024;
 881
 882                                 printf(" %5.2Lf %3.1qu %5.2Lf ",
 883                                        kb_per_transfer,
 884                                        total_transfers,
 885                                        total_mb);
 886                         }
 887                 }
 888         }
 889         if (xflag > 0 && zflag > 0 && firstline == 1 &&
 890             (Tflag > 0 || Cflag > 0)) {
 891                 /*
 892                  * If zflag is set and we did not print any device
 893                  * lines I/O because they were all zero,
 894                  * print TTY/CPU stats.
 895                  */
 896                 printf("%52s","");
 897                 if (Tflag > 0)
 898                         printf("%4.0Lf %5.0Lf", cur.tk_nin / etime,
 899                             cur.tk_nout / etime);
 900                 if (Cflag > 0)
 901                         cpustats();
 902                 printf("\n");
 903         }
 904 }
 905
 906 static void
 907 cpustats(void)
 908 {
 909         int state;
 910         double time;
 911
 912         time = 0.0;
 913
 914         for (state = 0; state < CPUSTATES; ++state)
 915                 time += cur.cp_time[state];
 916         for (state = 0; state < CPUSTATES; ++state)
 917                 printf(" %2.0f",
 918                        rint(100. * cur.cp_time[state] / (time ? time : 1)));
 919 }
 920
 921 static int
 922 readvar(kvm_t *kd, const char *name, int nlid, void *ptr, size_t len)
 923 {
 924         if (kd != NULL) {
 925                 ssize_t nbytes;
 926
 927                 nbytes = kvm_read(kd, namelist[nlid].n_value, ptr, len);
 928
 929                 if (nbytes < 0) {
 930                         warnx("kvm_read(%s): %s", namelist[nlid].n_name,
 931                             kvm_geterr(kd));
 932                         return (1);
 933                 }
 934                 if (nbytes != len) {
 935                         warnx("kvm_read(%s): expected %zu bytes, got %zd bytes",
 936                               namelist[nlid].n_name, len, nbytes);
 937                         return (1);
 938                 }
 939         } else {
 940                 size_t nlen = len;
 941
 942                 if (sysctlbyname(name, ptr, &nlen, NULL, 0) == -1) {
 943                         warn("sysctl(%s...) failed", name);
 944                         return (1);
 945                 }
 946                 if (nlen != len) {
 947                         warnx("sysctl(%s...): expected %lu, got %lu", name,
 948                               (unsigned long)len, (unsigned long)nlen);
 949                         return (1);
 950                 }
 951         }
 952         return (0);
 953 }