etc/defaults/rc.conf

   1 #!/bin/sh
   2
   3 # This is rc.conf - a file full of useful variables that you can set
   4 # to change the default startup behavior of your system.  You should
   5 # not edit this file!  Put any overrides into one of the ${rc_conf_files}
   6 # instead and you will be able to update these defaults later without
   7 # spamming your local configuration information.
   8 #
   9 # The ${rc_conf_files} files should only contain values which override
  10 # values set in this file.  This eases the upgrade path when defaults
  11 # are changed and new features are added.
  12 #
  13 # All arguments must be in double or single quotes.
  14 #
  15 # For a more detailed explanation of all the rc.conf variables, please
  16 # refer to the rc.conf(5) manual page.
  17 #
  18 # $FreeBSD$
  19
  20 ##############################################################
  21 ###  Important initial Boot-time options  ####################
  22 ##############################################################
  23
  24 rc_debug="NO"           # Set to YES to enable debugging output from rc.d
  25 rc_info="NO"            # Enables display of informational messages at boot.
  26 rc_startmsgs="YES"      # Show "Starting foo:" messages at boot
  27 rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown
  28 early_late_divider="FILESYSTEMS"        # Script that separates early/late
  29                         # stages of the boot process.  Make sure you know
  30                         # the ramifications if you change this.
  31                         # See rc.conf(5) for more details.
  32
  33 swapfile="NO"           # Set to name of swapfile if aux swapfile desired.
  34 apm_enable="NO"         # Set to YES to enable APM BIOS functions (or NO).
  35 apmd_enable="NO"        # Run apmd to handle APM event from userland.
  36 apmd_flags=""           # Flags to apmd (if enabled).
  37 ddb_enable="NO"         # Set to YES to load ddb scripts at boot.
  38 ddb_config="/etc/ddb.conf"      # ddb(8) config file.
  39 devd_enable="YES"       # Run devd, to trigger programs on device tree changes.
  40 devd_flags=""           # Additional flags for devd(8).
  41 #kld_list=""            # Kernel modules to load after local disks are mounted
  42 kldxref_enable="NO"     # Build linker.hints files with kldxref(8).
  43 kldxref_clobber="NO"    # Overwrite old linker.hints at boot.
  44 kldxref_module_path=""  # Override kern.module_path. A ';'-delimited list.
  45 powerd_enable="NO"      # Run powerd to lower our power usage.
  46 powerd_flags=""         # Flags to powerd (if enabled).
  47 tmpmfs="AUTO"           # Set to YES to always create an mfs /tmp, NO to never
  48 tmpsize="20m"           # Size of mfs /tmp if created
  49 tmpmfs_flags="-S"       # Extra mdmfs options for the mfs /tmp
  50 varmfs="AUTO"           # Set to YES to always create an mfs /var, NO to never
  51 varsize="32m"           # Size of mfs /var if created
  52 varmfs_flags="-S"       # Extra mount options for the mfs /var
  53 populate_var="AUTO"     # Set to YES to always (re)populate /var, NO to never
  54 cleanvar_enable="YES"   # Clean the /var directory
  55 local_startup="/usr/local/etc/rc.d" # startup script dirs.
  56 script_name_sep=" "     # Change if your startup scripts' names contain spaces
  57 rc_conf_files="/etc/rc.conf /etc/rc.conf.local"
  58
  59 # ZFS support
  60 zfs_enable="NO"         # Set to YES to automatically mount ZFS file systems
  61
  62 gptboot_enable="YES"    # GPT boot success/failure reporting.
  63
  64 # Experimental - test before enabling
  65 gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
  66 gbde_devices="NO"       # Devices to automatically attach (list, or AUTO)
  67 gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
  68 gbde_lockdir="/etc"     # Where to look for gbde lockfiles
  69
  70 # GELI disk encryption configuration.
  71 geli_devices=""         # List of devices to automatically attach in addition to
  72                         # GELI devices listed in /etc/fstab.
  73 geli_tries=""           # Number of times to attempt attaching geli device.
  74                         # If empty, kern.geom.eli.tries will be used.
  75 geli_default_flags=""   # Default flags for geli(8).
  76 geli_autodetach="YES"   # Automatically detach on last close.
  77                         # Providers are marked as such when all file systems are
  78                         # mounted.
  79 # Example use.
  80 #geli_devices="da1 mirror/home"
  81 #geli_da1_flags="-p -k /etc/geli/da1.keys"
  82 #geli_da1_autodetach="NO"
  83 #geli_mirror_home_flags="-k /etc/geli/home.keys"
  84
  85 geli_swap_flags="-e aes -l 256 -s 4096 -d"      # Options for GELI-encrypted
  86                                                 # swap partitions.
  87
  88 root_rw_mount="YES"     # Set to NO to inhibit remounting root read-write.
  89 fsck_y_enable="NO"      # Set to YES to do fsck -y if the initial preen fails.
  90 fsck_y_flags=""         # Additional flags for fsck -y
  91 background_fsck="YES"   # Attempt to run fsck in the background where possible.
  92 background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
  93 netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems.
  94 extra_netfs_types="NO"  # List of network extra filesystem types for delayed
  95                         # mount at startup (or NO).
  96
  97 ##############################################################
  98 ###  Network configuration sub-section  ######################
  99 ##############################################################
 100
 101 ### Basic network and firewall/security options: ###
 102 hostname=""                     # Set this!
 103 hostid_enable="YES"             # Set host UUID.
 104 hostid_file="/etc/hostid"       # File with hostuuid.
 105 nisdomainname="NO"              # Set to NIS domain if using NIS (or NO).
 106 dhclient_program="/sbin/dhclient"       # Path to dhcp client program.
 107 dhclient_flags=""               # Extra flags to pass to dhcp client.
 108 #dhclient_flags_fxp0=""         # Extra dhclient flags for fxp0 only
 109 background_dhclient="NO"        # Start dhcp client in the background.
 110 #background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
 111 synchronous_dhclient="NO"       # Start dhclient directly on configured
 112                                 # interfaces during startup.
 113 defaultroute_delay="30"         # Time to wait for a default route on a DHCP interface.
 114 defaultroute_carrier_delay="5"  # Time to wait for carrier while waiting for a default route.
 115 wpa_supplicant_program="/usr/sbin/wpa_supplicant"
 116 wpa_supplicant_flags="-s"       # Extra flags to pass to wpa_supplicant
 117 wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
 118 #
 119 firewall_enable="NO"            # Set to YES to enable firewall functionality
 120 firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
 121 firewall_type="UNKNOWN"         # Firewall type (see /etc/rc.firewall)
 122 firewall_quiet="NO"             # Set to YES to suppress rule display
 123 firewall_logging="NO"           # Set to YES to enable events logging
 124 firewall_flags=""               # Flags passed to ipfw when type is a file
 125 firewall_coscripts=""           # List of executables/scripts to run after
 126                                 # firewall starts/stops
 127 firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
 128                                 # firewall.
 129 #firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
 130                                 # "client" firewall.
 131 firewall_simple_iif="ed1"       # Inside network interface for "simple"
 132                                 # firewall.
 133 firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
 134                                 # firewall.
 135 firewall_simple_oif="ed0"       # Outside network interface for "simple"
 136                                 # firewall.
 137 firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
 138                                 # firewall.
 139 #firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
 140                                 # firewall.
 141 #firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
 142                                 # for "simple" firewall.
 143 #firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
 144                                 # firewall.
 145 #firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
 146                                 # for "simple" firewall.
 147 firewall_myservices=""          # List of TCP ports on which this host
 148                                 # offers services for "workstation" firewall.
 149 firewall_allowservices=""       # List of IPs which have access to
 150                                 # $firewall_myservices for "workstation"
 151                                 # firewall.
 152 firewall_trusted=""             # List of IPs which have full access to this
 153                                 # host for "workstation" firewall.
 154 firewall_logdeny="NO"           # Set to YES to log default denied incoming
 155                                 # packets for "workstation" firewall.
 156 firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
 157                                 # for which denied incoming packets are not
 158                                 # logged for "workstation" firewall.
 159 firewall_nat_enable="NO"        # Enable kernel NAT (if firewall_enable == YES)
 160 firewall_nat_interface=""       # Public interface or IPaddress to use
 161 firewall_nat_flags=""           # Additional configuration parameters
 162 dummynet_enable="NO"            # Load the dummynet(4) module
 163 ip_portrange_first="NO"         # Set first dynamically allocated port
 164 ip_portrange_last="NO"          # Set last dynamically allocated port
 165 ike_enable="NO"                 # Enable IKE daemon (usually racoon or isakmpd)
 166 ike_program="/usr/local/sbin/isakmpd"   # Path to IKE daemon
 167 ike_flags=""                    # Additional flags for IKE daemon
 168 ipsec_enable="NO"               # Set to YES to run setkey on ipsec_file
 169 ipsec_file="/etc/ipsec.conf"    # Name of config file for setkey
 170 natd_program="/sbin/natd"       # path to natd, if you want a different one.
 171 natd_enable="NO"                # Enable natd (if firewall_enable == YES).
 172 natd_interface=""               # Public interface or IPaddress to use.
 173 natd_flags=""                   # Additional flags for natd.
 174 ipfilter_enable="NO"            # Set to YES to enable ipfilter functionality
 175 ipfilter_program="/sbin/ipf"    # where the ipfilter program lives
 176 ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
 177                                 # /usr/src/contrib/ipfilter/rules for examples
 178 ipfilter_flags=""               # additional flags for ipfilter
 179 ipnat_enable="NO"               # Set to YES to enable ipnat functionality
 180 ipnat_program="/sbin/ipnat"     # where the ipnat program lives
 181 ipnat_rules="/etc/ipnat.rules"  # rules definition file for ipnat
 182 ipnat_flags=""                  # additional flags for ipnat
 183 ipmon_enable="NO"               # Set to YES for ipmon; needs ipfilter or ipnat
 184 ipmon_program="/sbin/ipmon"     # where the ipfilter monitor program lives
 185 ipmon_flags="-Ds"               # typically "-Ds" or "-D /var/log/ipflog"
 186 ipfs_enable="NO"                # Set to YES to enable saving and restoring
 187                                 # of state tables at shutdown and boot
 188 ipfs_program="/sbin/ipfs"       # where the ipfs program lives
 189 ipfs_flags=""                   # additional flags for ipfs
 190 pf_enable="NO"                  # Set to YES to enable packet filter (pf)
 191 pf_rules="/etc/pf.conf"         # rules definition file for pf
 192 pf_program="/sbin/pfctl"        # where the pfctl program lives
 193 pf_flags=""                     # additional flags for pfctl
 194 pflog_enable="NO"               # Set to YES to enable packet filter logging
 195 pflog_logfile="/var/log/pflog"  # where pflogd should store the logfile
 196 pflog_program="/sbin/pflogd"    # where the pflogd program lives
 197 pflog_flags=""                  # additional flags for pflogd
 198 ftpproxy_enable="NO"            # Set to YES to enable ftp-proxy(8) for pf
 199 ftpproxy_flags=""               # additional flags for ftp-proxy(8)
 200 pfsync_enable="NO"              # Expose pf state to other hosts for syncing
 201 pfsync_syncdev=""               # Interface for pfsync to work through
 202 pfsync_syncpeer=""              # IP address of pfsync peer host
 203 pfsync_ifconfig=""              # Additional options to ifconfig(8) for pfsync
 204 tcp_extensions="YES"            # Set to NO to turn off RFC1323 extensions.
 205 log_in_vain="0"                 # >=1 to log connects to ports w/o listeners.
 206 tcp_keepalive="YES"             # Enable stale TCP connection timeout (or NO).
 207 tcp_drop_synfin="NO"            # Set to YES to drop TCP packets with SYN+FIN
 208                                 # NOTE: this violates the TCP specification
 209 icmp_drop_redirect="NO"         # Set to YES to ignore ICMP REDIRECT packets
 210 icmp_log_redirect="NO"          # Set to YES to log ICMP REDIRECT packets
 211 network_interfaces="auto"       # List of network interfaces (or "auto").
 212 cloned_interfaces=""            # List of cloned network interfaces to create.
 213 #cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
 214 #ifconfig_lo0="inet 127.0.0.1"  # default loopback device configuration.
 215 #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
 216 #ifconfig_ed0_ipx="ipx 0x00010010"      # Sample IPX address family entry.
 217 #ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
 218 #ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
 219 #ifconfig_fxp0_name="net0"      # Change interface name from fxp0 to net0.
 220 #vlans_fxp0="101 vlan0"         # vlan(4) interfaces for fxp0 device
 221 #create_args_vlan0="vlan 102"   # vlan tag for vlan0 device
 222 #wlans_ath0="wlan0"             # wlan(4) interfaces for ath0 device
 223 #wlandebug_wlan0="scan+auth+assoc"      # Set debug flags with wlanddebug(8)
 224 #ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
 225 #
 226 #autobridge_interfaces="bridge0"        # List of bridges to check
 227 #autobridge_bridge0="tap* vlan0"        # Interface glob to automatically add to the bridge
 228 #
 229 # If you have any sppp(4) interfaces above, you might also want to set
 230 # the following parameters.  Refer to spppcontrol(8) for their meaning.
 231 sppp_interfaces=""              # List of sppp interfaces.
 232 #sppp_interfaces="...0"         # example: sppp over ...
 233 #spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
 234 gif_interfaces=""               # List of GIF tunnels.
 235 #gif_interfaces="gif0 gif1"     # Examples typically for a router.
 236                                 # Choose correct tunnel addrs.
 237 #gifconfig_gif0="10.1.1.1 10.1.2.1"     # Examples typically for a router.
 238 #gifconfig_gif1="10.1.1.2 10.1.2.2"     # Examples typically for a router.
 239 fec_interfaces=""               # List of Fast EtherChannels.
 240 #fec_interfaces="fec0 fec1"
 241 #fecconfig_fec0="fxp0 dc0"      # Examples typically for two NICs
 242 #fecconfig_fec1="em0 em1 bge0 bge1"     # Examples typically for four NICs
 243
 244 # User ppp configuration.
 245 ppp_enable="NO"         # Start user-ppp (or NO).
 246 ppp_program="/usr/sbin/ppp"     # Path to user-ppp program.
 247 ppp_mode="auto"         # Choice of "auto", "ddial", "direct" or "dedicated".
 248                         # For details see man page for ppp(8). Default is auto.
 249 ppp_nat="YES"           # Use PPP's internal network address translation or NO.
 250 ppp_profile="papchap"   # Which profile to use from /etc/ppp/ppp.conf.
 251 ppp_user="root"         # Which user to run ppp as
 252
 253 # Start multiple instances of ppp at boot time
 254 #ppp_profile="profile1 profile2 profile3"       # Which profiles to use
 255 #ppp_profile1_mode="ddial"      # Override ppp mode for profile1
 256 #ppp_profile2_nat="NO"          # Override nat mode for profile2
 257 # profile3 uses default ppp_mode and ppp_nat
 258
 259 ### Network daemon (miscellaneous) ###
 260 hostapd_enable="NO"             # Run hostap daemon.
 261 syslogd_enable="YES"            # Run syslog daemon (or NO).
 262 syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
 263 syslogd_flags="-s"              # Flags to syslogd (if enabled).
 264 inetd_enable="NO"               # Run the network daemon dispatcher (YES/NO).
 265 inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
 266 inetd_flags="-wW -C 60"         # Optional flags to inetd
 267 hastd_enable="NO"               # Run the HAST daemon (YES/NO).
 268 hastd_program="/sbin/hastd"     # path to hastd, if you want a different one.
 269 hastd_flags=""                  # Optional flags to hastd.
 270 #
 271 # named.  It may be possible to run named in a sandbox, man security for
 272 # details.
 273 #
 274 named_enable="NO"               # Run named, the DNS server (or NO).
 275 named_program="/usr/sbin/named" # Path to named, if you want a different one.
 276 named_conf="/etc/namedb/named.conf"     # Path to the configuration file
 277 #named_flags=""                 # Use this for flags OTHER than -u and -c
 278 named_uid="bind"                # User to run named as
 279 named_chrootdir="/var/named"    # Chroot directory (or "" not to auto-chroot it)
 280 named_chroot_autoupdate="YES"   # Automatically install/update chrooted
 281                                 # components of named. See /etc/rc.d/named.
 282 named_symlink_enable="YES"      # Symlink the chrooted pid file
 283 named_wait="NO"                 # Wait for working name service before exiting
 284 named_wait_host="localhost"     # Hostname to check if named_wait is enabled
 285 named_auto_forward="NO"         # Set up forwarders from /etc/resolv.conf
 286 named_auto_forward_only="NO"    # Do "forward only" instead of "forward first"
 287
 288 #
 289 # kerberos. Do not run the admin daemons on slave servers
 290 #
 291 kerberos5_server_enable="NO"    # Run a kerberos 5 master server (or NO).
 292 kerberos5_server="/usr/libexec/kdc"     # path to kerberos 5 KDC
 293 kerberos5_server_flags="--detach"       # Additional flags to the kerberos 5 server
 294 kadmind5_server_enable="NO"     # Run kadmind (or NO)
 295 kadmind5_server="/usr/libexec/kadmind"  # path to kerberos 5 admin daemon
 296 kpasswdd_server_enable="NO"     # Run kpasswdd (or NO)
 297 kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
 298
 299 gssd_enable="NO"                # Run the gssd daemon (or NO).
 300 gssd_flags=""                   # Flags for gssd.
 301
 302 rwhod_enable="NO"               # Run the rwho daemon (or NO).
 303 rwhod_flags=""                  # Flags for rwhod
 304 rarpd_enable="NO"               # Run rarpd (or NO).
 305 rarpd_flags="-a"                # Flags to rarpd.
 306 bootparamd_enable="NO"          # Run bootparamd (or NO).
 307 bootparamd_flags=""             # Flags to bootparamd
 308 pppoed_enable="NO"              # Run the PPP over Ethernet daemon.
 309 pppoed_provider="*"             # Provider and ppp(8) config file entry.
 310 pppoed_flags="-P /var/run/pppoed.pid"   # Flags to pppoed (if enabled).
 311 pppoed_interface="fxp0"         # The interface that pppoed runs on.
 312 sshd_enable="NO"                # Enable sshd
 313 sshd_program="/usr/sbin/sshd"   # path to sshd, if you want a different one.
 314 sshd_flags=""                   # Additional flags for sshd.
 315 ftpd_enable="NO"                # Enable stand-alone ftpd.
 316 ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
 317 ftpd_flags=""                   # Additional flags to stand-alone ftpd.
 318
 319 ### Network daemon (NFS): All need rpcbind_enable="YES" ###
 320 amd_enable="NO"                 # Run amd service with $amd_flags (or NO).
 321 amd_program="/usr/sbin/amd"     # path to amd, if you want a different one.
 322 amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
 323 amd_map_program="NO"            # Can be set to "ypcat -k amd.master"
 324 nfs_client_enable="NO"          # This host is an NFS client (or NO).
 325 nfs_access_cache="60"           # Client cache timeout in seconds
 326 nfs_server_enable="NO"          # This host is an NFS server (or NO).
 327 oldnfs_server_enable="NO"       # Run the old NFS server (YES/NO).
 328 nfs_server_flags="-u -t -n 4"   # Flags to nfsd (if enabled).
 329 mountd_enable="NO"              # Run mountd (or NO).
 330 mountd_flags="-r"               # Flags to mountd (if NFS server enabled).
 331 weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
 332 nfs_reserved_port_only="NO"     # Provide NFS only on secure port (or NO).
 333 nfs_bufpackets=""               # bufspace (in packets) for client
 334 rpc_lockd_enable="NO"           # Run NFS rpc.lockd needed for client/server.
 335 rpc_lockd_flags=""              # Flags to rpc.lockd (if enabled).
 336 rpc_statd_enable="NO"           # Run NFS rpc.statd needed for client/server.
 337 rpc_statd_flags=""              # Flags to rpc.statd (if enabled).
 338 rpcbind_enable="NO"             # Run the portmapper service (YES/NO).
 339 rpcbind_program="/usr/sbin/rpcbind"     # path to rpcbind, if you want a different one.
 340 rpcbind_flags=""                # Flags to rpcbind (if enabled).
 341 rpc_ypupdated_enable="NO"       # Run if NIS master and SecureRPC (or NO).
 342 keyserv_enable="NO"             # Run the SecureRPC keyserver (or NO).
 343 keyserv_flags=""                # Flags to keyserv (if enabled).
 344 nfsv4_server_enable="NO"        # Enable support for NFSv4
 345 nfscbd_enable="NO"              # NFSv4 client side callback daemon
 346 nfscbd_flags=""                 # Flags for nfscbd
 347 nfsuserd_enable="NO"            # NFSv4 user/group name mapping daemon
 348 nfsuserd_flags=""               # Flags for nfsuserd
 349
 350 ### Network Time Services options: ###
 351 timed_enable="NO"               # Run the time daemon (or NO).
 352 timed_flags=""                  # Flags to timed (if enabled).
 353 ntpdate_enable="NO"             # Run ntpdate to sync time on boot (or NO).
 354 ntpdate_program="/usr/sbin/ntpdate"     # path to ntpdate, if you want a different one.
 355 ntpdate_flags="-b"              # Flags to ntpdate (if enabled).
 356 ntpdate_config="/etc/ntp.conf"  # ntpdate(8) configuration file
 357 ntpdate_hosts=""                # Whitespace-separated list of ntpdate(8) servers.
 358 ntpd_enable="NO"                # Run ntpd Network Time Protocol (or NO).
 359 ntpd_program="/usr/sbin/ntpd"   # path to ntpd, if you want a different one.
 360 ntpd_config="/etc/ntp.conf"     # ntpd(8) configuration file
 361 ntpd_sync_on_start="NO"         # Sync time on ntpd startup, even if offset is high
 362 ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
 363                                 # Flags to ntpd (if enabled).
 364
 365 # Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
 366 nis_client_enable="NO"          # We're an NIS client (or NO).
 367 nis_client_flags=""             # Flags to ypbind (if enabled).
 368 nis_ypset_enable="NO"           # Run ypset at boot time (or NO).
 369 nis_ypset_flags=""              # Flags to ypset (if enabled).
 370 nis_server_enable="NO"          # We're an NIS server (or NO).
 371 nis_server_flags=""             # Flags to ypserv (if enabled).
 372 nis_ypxfrd_enable="NO"          # Run rpc.ypxfrd at boot time (or NO).
 373 nis_ypxfrd_flags=""             # Flags to rpc.ypxfrd (if enabled).
 374 nis_yppasswdd_enable="NO"       # Run rpc.yppasswdd at boot time (or NO).
 375 nis_yppasswdd_flags=""          # Flags to rpc.yppasswdd (if enabled).
 376
 377 ### SNMP daemon ###
 378 # Be sure to understand the security implications of running SNMP v1/v2
 379 # in your network.
 380 bsnmpd_enable="NO"              # Run the SNMP daemon (or NO).
 381 bsnmpd_flags=""                 # Flags for bsnmpd.
 382
 383 ### Network routing options: ###
 384 defaultrouter="NO"              # Set to default gateway (or NO).
 385 static_arp_pairs=""             # Set to static ARP list (or leave empty).
 386 static_ndp_pairs=""             # Set to static NDP list (or leave empty).
 387 static_routes=""                # Set to static route list (or leave empty).
 388 natm_static_routes=""           # Set to static route list for NATM (or leave empty).
 389 gateway_enable="NO"             # Set to YES if this host will be a gateway.
 390 routed_enable="NO"              # Set to YES to enable a routing daemon.
 391 routed_program="/sbin/routed"   # Name of routing daemon to use if enabled.
 392 routed_flags="-q"               # Flags for routing daemon.
 393 mrouted_enable="NO"             # Do IPv4 multicast routing.
 394 mrouted_program="/usr/local/sbin/mrouted"       # Name of IPv4 multicast
 395                                                 # routing daemon.  You need to
 396                                                 # install it from package or
 397                                                 # port.
 398 mrouted_flags=""                # Flags for multicast routing daemon.
 399 ipxgateway_enable="NO"          # Set to YES to enable IPX routing.
 400 ipxrouted_enable="NO"           # Set to YES to run the IPX routing daemon.
 401 ipxrouted_flags=""              # Flags for IPX routing daemon.
 402 arpproxy_all="NO"               # replaces obsolete kernel option ARP_PROXYALL.
 403 forward_sourceroute="NO"        # do source routing (only if gateway_enable is set to "YES")
 404 accept_sourceroute="NO"         # accept source routed packets to us
 405
 406 ### ATM interface options: ###
 407 atm_enable="NO"                 # Configure ATM interfaces (or NO).
 408 #atm_netif_hea0="atm 1"         # Network interfaces for physical interface.
 409 #atm_sigmgr_hea0="uni31"        # Signalling manager for physical interface.
 410 #atm_prefix_hea0="ILMI"         # NSAP prefix (UNI interfaces only) (or ILMI).
 411 #atm_macaddr_hea0="NO"          # Override physical MAC address (or NO).
 412 #atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
 413 #atm_scsparp_atm0="NO"          # Run SCSP/ATMARP on network interface (or NO).
 414 atm_pvcs=""                     # Set to PVC list (or leave empty).
 415 atm_arps=""                     # Set to permanent ARP list (or leave empty).
 416
 417 ### Bluetooth ###
 418 hcsecd_enable="NO"              # Enable hcsecd(8) (or NO)
 419 hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file
 420
 421 sdpd_enable="NO"                # Enable sdpd(8) (or NO)
 422 sdpd_control="/var/run/sdp"     # sdpd(8) control socket
 423 sdpd_groupname="nobody"         # set spdp(8) user/group to run as after
 424 sdpd_username="nobody"          # it initializes
 425
 426 bthidd_enable="NO"              # Enable bthidd(8) (or NO)
 427 bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
 428 bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file
 429
 430 rfcomm_pppd_server_enable="NO"  # Enable rfcomm_pppd(8) in server mode (or NO)
 431 rfcomm_pppd_server_profile="one two"    # Profile to use from /etc/ppp/ppp.conf
 432 #
 433 #rfcomm_pppd_server_one_bdaddr=""       # Override local bdaddr for 'one'
 434 rfcomm_pppd_server_one_channel="1"      # Override local channel for 'one'
 435 #rfcomm_pppd_server_one_register_sp="NO"        # Override SP and DUN register
 436 #rfcomm_pppd_server_one_register_dun="NO"       # for 'one'
 437 #
 438 #rfcomm_pppd_server_two_bdaddr=""       # Override local bdaddr for 'two'
 439 rfcomm_pppd_server_two_channel="3"      # Override local channel for 'two'
 440 #rfcomm_pppd_server_two_register_sp="NO"        # Override SP and DUN register
 441 #rfcomm_pppd_server_two_register_dun="NO"       # for 'two'
 442
 443 ubthidhci_enable="NO"           # Switch an USB BT controller present on
 444 #ubthidhci_busnum="3"           # bus 3 and addr 2 from HID mode to HCI mode.
 445 #ubthidhci_addr="2"             # Check usbconfig list to find the correct
 446                                 # numbers for your system.
 447
 448 ### Network link/usability verification options
 449 netwait_enable="NO"             # Enable rc.d/netwait (or NO)
 450 #netwait_ip=""                  # IP addresses to be pinged by netwait.
 451 netwait_timeout="60"            # Total number of seconds to perform pings.
 452 #netwait_if=""                  # Interface name to watch link state on.
 453 netwait_if_timeout="30"         # Total number of seconds to monitor link state.
 454
 455 ### Miscellaneous network options: ###
 456 icmp_bmcastecho="NO"    # respond to broadcast ping packets
 457
 458 ### IPv6 options: ###
 459 ipv6_network_interfaces="auto"  # List of IPv6 network interfaces
 460                                 # (or "auto" or "none").
 461 ipv6_activate_all_interfaces="NO"       # If NO, interfaces which have no
 462                                         # corresponding $ifconfig_IF_ipv6 is
 463                                         # marked as IFDISABLED for security
 464                                         # reason.
 465 ipv6_defaultrouter="NO"         # Set to IPv6 default gateway (or NO).
 466 #ipv6_defaultrouter="2002:c058:6301::"  # Use this for 6to4 (RFC 3068)
 467 ipv6_static_routes=""           # Set to static route list (or leave empty).
 468 #ipv6_static_routes="xxx"       # An example to set fec0:0000:0000:0006::/64
 469                                 #  route toward loopback interface.
 470 #ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
 471 ipv6_gateway_enable="NO"        # Set to YES if this host will be a gateway.
 472 ipv6_cpe_wanif="NO"             # Set to the upstram interface name if this
 473                                 # node will work as a router to forward IPv6
 474                                 # packets not explicitly addressed to itself.
 475 ipv6_privacy="NO"               # Use privacy address on RA-receiving IFs
 476                                 # (RFC 4941)
 477
 478 route6d_enable="NO"             # Set to YES to enable an IPv6 routing daemon.
 479 route6d_program="/usr/sbin/route6d"     # Name of IPv6 routing daemon.
 480 route6d_flags=""                # Flags to IPv6 routing daemon.
 481 #route6d_flags="-l"             # Example for route6d with only IPv6 site local
 482                                 # addrs.
 483 #route6d_flags="-q"             # If you want to run a routing daemon on an end
 484                                 # node, you should stop advertisement.
 485 #ipv6_network_interfaces="ed0 ep0"      # Examples for router
 486                                         # or static configuration for end node.
 487                                         # Choose correct prefix value.
 488 #ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
 489 #ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
 490 ipv6_default_interface="NO"     # Default output interface for scoped addrs.
 491                                 # This works only with
 492                                 # ipv6_gateway_enable="NO".
 493 rtsol_flags=""                  # Flags to IPv6 router solicitation.
 494 rtsold_enable="NO"              # Set to YES to enable an IPv6 router
 495                                 # solicitation daemon.
 496 rtsold_flags="-a"               # Flags to an IPv6 router solicitation
 497                                 # daemon.
 498 rtadvd_enable="NO"              # Set to YES to enable an IPv6 router
 499                                 # advertisement daemon. If set to YES,
 500                                 # this router becomes a possible candidate
 501                                 # IPv6 default router for local subnets.
 502 rtadvd_interfaces=""            # Interfaces rtadvd sends RA packets.
 503 mroute6d_enable="NO"            # Do IPv6 multicast routing.
 504 mroute6d_program="/usr/local/sbin/pim6dd"       # Name of IPv6 multicast
 505                                                 # routing daemon.  You need to
 506                                                 # install it from package or
 507                                                 # port.
 508 mroute6d_flags=""               # Flags to IPv6 multicast routing daemon.
 509 stf_interface_ipv4addr=""       # Local IPv4 addr for 6to4 IPv6 over IPv4
 510                                 # tunneling interface. Specify this entry
 511                                 # to enable 6to4 interface.
 512 stf_interface_ipv4plen="0"      # Prefix length for 6to4 IPv4 addr,
 513                                 # to limit peer addr range. Effective value
 514                                 # is 0-31.
 515 stf_interface_ipv6_ifid="0:0:0:1"       # IPv6 interface id for stf0.
 516                                 # If you like, you can set "AUTO" for this.
 517 stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
 518 ipv6_faith_prefix="NO"          # Set faith prefix to enable a FAITH
 519                                 # IPv6-to-IPv4 TCP translator.  You also need
 520                                 # faithd(8) setup.
 521 ipv6_ipv4mapping="NO"           # Set to "YES" to enable IPv4 mapped IPv6 addr
 522                                 # communication. (like ::ffff:a.b.c.d)
 523 ipv6_ipfilter_rules="/etc/ipf6.rules"   # rules definition file for ipfilter,
 524                                         # see /usr/src/contrib/ipfilter/rules
 525                                         # for examples
 526 ip6addrctl_enable="YES" # Set to YES to enable default address selection
 527 ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
 528 ip6addrctl_policy="AUTO"        # A pre-defined address selection policy
 529                                 # (ipv4_prefer, ipv6_prefer, or AUTO)
 530
 531 ##############################################################
 532 ###  System console options  #################################
 533 ##############################################################
 534
 535 keyboard=""             # keyboard device to use (default /dev/kbd0).
 536 keymap="NO"             # keymap in /usr/share/syscons/keymaps/* (or NO).
 537 keyrate="NO"            # keyboard rate to: slow, normal, fast (or NO).
 538 keybell="NO"            # See kbdcontrol(1) for options.  Use "off" to disable.
 539 keychange="NO"          # function keys default values (or NO).
 540 cursor="NO"             # cursor type {normal|blink|destructive} (or NO).
 541 scrnmap="NO"            # screen map in /usr/share/syscons/scrnmaps/* (or NO).
 542 font8x16="NO"           # font 8x16 from /usr/share/syscons/fonts/* (or NO).
 543 font8x14="NO"           # font 8x14 from /usr/share/syscons/fonts/* (or NO).
 544 font8x8="NO"            # font 8x8 from /usr/share/syscons/fonts/* (or NO).
 545 blanktime="300"         # blank time (in seconds) or "NO" to turn it off.
 546 saver="NO"              # screen saver: Uses /boot/kernel/${saver}_saver.ko
 547 moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
 548                                # specifically overriden in rc.conf(5).
 549 moused_enable="NO"      # Run the mouse daemon.
 550 moused_type="auto"      # See man page for rc.conf(5) for available settings.
 551 moused_port="/dev/psm0" # Set to your mouse port.
 552 moused_flags=""         # Any additional flags to moused.
 553 mousechar_start="NO"    # if 0xd0-0xd3 default range is occupied in your
 554                         # language code table, specify alternative range
 555                         # start like mousechar_start=3, see vidcontrol(1)
 556 allscreens_flags=""     # Set this vidcontrol mode for all virtual screens
 557 allscreens_kbdflags=""  # Set this kbdcontrol mode for all virtual screens
 558
 559 ##############################################################
 560 ###  Mail Transfer Agent (MTA) options  ######################
 561 ##############################################################
 562
 563 mta_start_script="/etc/rc.sendmail"
 564                         # Script to start your chosen MTA, called by /etc/rc.
 565 # Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
 566 sendmail_enable="NO"    # Run the sendmail inbound daemon (YES/NO).
 567 sendmail_pidfile="/var/run/sendmail.pid"        # sendmail pid file
 568 sendmail_procname="/usr/sbin/sendmail"          # sendmail process name
 569 sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
 570 sendmail_submit_enable="YES"    # Start a localhost-only MTA for mail submission
 571 sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
 572                                 # Flags for localhost-only MTA
 573 sendmail_outbound_enable="YES"  # Dequeue stuck mail (YES/NO).
 574 sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
 575 sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
 576 sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
 577                                 # Flags for sendmail_msp_queue daemon.
 578 sendmail_rebuild_aliases="NO"   # Run newaliases if necessary (YES/NO).
 579
 580
 581 ##############################################################
 582 ###  Miscellaneous administrative options  ###################
 583 ##############################################################
 584
 585 auditd_enable="NO"      # Run the audit daemon.
 586 auditd_program="/usr/sbin/auditd"       # Path to the audit daemon.
 587 auditd_flags=""         # Which options to pass to the audit daemon.
 588 cron_enable="YES"       # Run the periodic job daemon.
 589 cron_program="/usr/sbin/cron"   # Which cron executable to run (if enabled).
 590 cron_dst="YES"          # Handle DST transitions intelligently (YES/NO)
 591 cron_flags=""           # Which options to pass to the cron daemon.
 592 lpd_enable="NO"         # Run the line printer daemon.
 593 lpd_program="/usr/sbin/lpd"     # path to lpd, if you want a different one.
 594 lpd_flags=""            # Flags to lpd (if enabled).
 595 nscd_enable="NO"        # Run the nsswitch caching daemon.
 596 chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
 597 chkprintcap_flags="-d"  # Create missing directories by default.
 598 dumpdev="NO"            # Device to crashdump to (device name, AUTO, or NO).
 599 dumpdir="/var/crash"    # Directory where crash dumps are to be stored
 600 savecore_flags=""       # Used if dumpdev is enabled above, and present.
 601 crashinfo_enable="YES"  # Automatically generate crash dump summary.
 602 crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
 603 quota_enable="NO"       # turn on quotas on startup (or NO).
 604 check_quotas="YES"      # Check quotas on startup (or NO).
 605 quotaon_flags="-a"      # Turn quotas on for all file systems (if enabled)
 606 quotaoff_flags="-a"     # Turn quotas off for all file systems at shutdown
 607 quotacheck_flags="-a"   # Check all file system quotas (if enabled)
 608 accounting_enable="NO"  # Turn on process accounting (or NO).
 609 ibcs2_enable="NO"       # Ibcs2 (SCO) emulation loaded at startup (or NO).
 610 ibcs2_loaders="coff"    # List of additional Ibcs2 loaders (or NO).
 611
 612 # Emulation/compatibility services provided by /etc/rc.d/abi
 613 sysvipc_enable="NO"     # Load System V IPC primitives at startup (or NO).
 614 linux_enable="NO"       # Linux binary compatibility loaded at startup (or NO).
 615 svr4_enable="NO"        # SysVR4 emulation loaded at startup (or NO).
 616 clear_tmp_enable="NO"   # Clear /tmp at startup.
 617 clear_tmp_X="YES"       # Clear and recreate X11-related directories in /tmp
 618 ldconfig_insecure="NO"  # Set to YES to disable ldconfig security checks
 619 ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
 620                         # shared library search paths
 621 ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
 622 ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
 623                         # a.out shared library search paths
 624 ldconfig_local_dirs="/usr/local/libdata/ldconfig"
 625                         # Local directories with ldconfig configuration files.
 626 ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
 627                         # Local directories with 32-bit compatibility ldconfig
 628                         # configuration files.
 629 kern_securelevel_enable="NO"    # kernel security level (see security(7))
 630 kern_securelevel="-1"   # range: -1..3 ; `-1' is the most insecure
 631                         # Note that setting securelevel to 0 will result
 632                         # in the system booting with securelevel set to 1, as
 633                         # init(8) will raise the level when rc(8) completes.
 634 update_motd="YES"       # update version info in /etc/motd (or NO)
 635 entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
 636                         # /var/db/entropy-file is preferred if / is not avail.
 637 entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
 638 entropy_save_sz="2048"  # Size of the entropy cache files.
 639 entropy_save_num="8"    # Number of entropy cache files to save.
 640 harvest_interrupt="YES" # Entropy device harvests interrupt randomness
 641 harvest_ethernet="YES"  # Entropy device harvests ethernet randomness
 642 harvest_p_to_p="YES"    # Entropy device harvests point-to-point randomness
 643 dmesg_enable="YES"      # Save dmesg(8) to /var/run/dmesg.boot
 644 watchdogd_enable="NO"   # Start the software watchdog daemon
 645 watchdogd_flags=""      # Flags to watchdogd (if enabled)
 646 devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
 647                                                             # devfs(8) rules.
 648 devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
 649 devfs_set_rulesets=""   # A list of /mount/dev=ruleset_name settings to
 650                         # apply (must be mounted already, i.e. fstab(5))
 651 performance_cx_lowest="HIGH"    # Online CPU idle state
 652 performance_cpu_freq="NONE"     # Online CPU frequency
 653 economy_cx_lowest="HIGH"        # Offline CPU idle state
 654 economy_cpu_freq="NONE"         # Offline CPU frequency
 655 virecover_enable="YES"  # Perform housekeeping for the vi(1) editor
 656 ugidfw_enable="NO"      # Load mac_bsdextended(4) rules on boot
 657 bsdextended_script="/etc/rc.bsdextended"        # Default mac_bsdextended(4)
 658                                                 # ruleset file.
 659 newsyslog_enable="YES"  # Run newsyslog at startup.
 660 newsyslog_flags="-CN"   # Newsyslog flags to create marked files
 661 mixer_enable="YES"      # Run the sound mixer.
 662 opensm_enable="NO"      # Opensm(8) for infiniband devices defaults to off
 663
 664 ##############################################################
 665 ### Jail Configuration #######################################
 666 ##############################################################
 667 jail_enable="NO"        # Set to NO to disable starting of any jails
 668 jail_parallel_start="NO"        # Start jails in the background
 669 jail_list=""            # Space separated list of names of jails
 670 jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname
 671 jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail
 672 jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail
 673
 674 #
 675 # To use rc's built-in jail infrastructure create entries for
 676 # each jail, specified in jail_list, with the following variables.
 677 # NOTES:
 678 # - replace 'example' with the jail's name.
 679 # - except rootdir, hostname, ip and the _multi<n> addresses,
 680 #   all of the following variables may be made global jail variables
 681 #   if you don't specify a jail name (ie. jail_interface, jail_devfs_ruleset).
 682 #
 683 #jail_example_rootdir="/usr/jail/default"       # Jail's root directory
 684 #jail_example_hostname="default.domain.com"     # Jail's hostname
 685 #jail_example_interface=""                      # Jail's interface variable to create IP aliases on
 686 #jail_example_fib="0"                           # Routing table for setfib(1)
 687 #jail_example_ip="192.0.2.10,2001:db8::17"      # Jail's primary IPv4 and IPv6 address
 688 #jail_example_ip_multi0="2001:db8::10"          #  and another IPv6 address
 689 #jail_example_exec_start="/bin/sh /etc/rc"              # command to execute in jail for starting
 690 #jail_example_exec_afterstart0="/bin/sh command"        # command to execute after the one for
 691                                                         # starting the jail. More than one can be
 692                                                         # specified using a trailing number
 693 #jail_example_exec_stop="/bin/sh /etc/rc.shutdown"      # command to execute in jail for stopping
 694 #jail_example_devfs_enable="NO"                 # mount devfs in the jail
 695 #jail_example_devfs_ruleset="ruleset_name"      # devfs ruleset to apply to jail -
 696                                                 # usually you want "devfsrules_jail".
 697 #jail_example_fdescfs_enable="NO"               # mount fdescfs in the jail
 698 #jail_example_procfs_enable="NO"                # mount procfs in jail
 699 #jail_example_mount_enable="NO"                 # mount/umount jail's fs
 700 #jail_example_fstab=""                          # fstab(5) for mount/umount
 701 #jail_example_flags="-l -U root"                # flags for jail(8)
 702
 703 ##############################################################
 704 ### Define source_rc_confs, the mechanism used by /etc/rc.* ##
 705 ### scripts to source rc_conf_files overrides safely.       ##
 706 ##############################################################
 707
 708 if [ -z "${source_rc_confs_defined}" ]; then
 709         source_rc_confs_defined=yes
 710         source_rc_confs () {
 711                 local i sourced_files
 712                 for i in ${rc_conf_files}; do
 713                         case ${sourced_files} in
 714                         *:$i:*)
 715                                 ;;
 716                         *)
 717                                 sourced_files="${sourced_files}:$i:"
 718                                 if [ -r $i ]; then
 719                                         . $i
 720                                 fi
 721                                 ;;
 722                         esac
 723                 done
 724         }
 725 fi