]> CyberLeo.Net >> Repos - FreeBSD/releng/9.0.git/blob - etc/network.subr
MFC r225849:
[FreeBSD/releng/9.0.git] / etc / network.subr
1 #
2 # Copyright (c) 2003 The FreeBSD Project. All rights reserved.
3 #
4 # Redistribution and use in source and binary forms, with or without
5 # modification, are permitted provided that the following conditions
6 # are met:
7 # 1. Redistributions of source code must retain the above copyright
8 #    notice, this list of conditions and the following disclaimer.
9 # 2. Redistributions in binary form must reproduce the above copyright
10 #    notice, this list of conditions and the following disclaimer in the
11 #    documentation and/or other materials provided with the distribution.
12 #
13 # THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
14 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
15 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
16 # ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
17 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
18 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
19 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
20 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
21 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
22 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
23 # SUCH DAMAGE.
24 #
25 # $FreeBSD$
26 #
27
28 #
29 # Subroutines commonly used from network startup scripts.
30 # Requires that rc.conf be loaded first.
31 #
32
33 # ifn_start ifn
34 #       Bring up and configure an interface.  If some configuration is
35 #       applied, print the interface configuration.
36 #
37 ifn_start()
38 {
39         local ifn cfg
40         ifn="$1"
41         cfg=1
42
43         [ -z "$ifn" ] && err 1 "ifn_start called without an interface"
44
45         ifscript_up ${ifn} && cfg=0
46         ifconfig_up ${ifn} && cfg=0
47         afexists inet && ipv4_up ${ifn} && cfg=0
48         afexists inet6 && ipv6_up ${ifn} && cfg=0
49         afexists ipx && ipx_up ${ifn} && cfg=0
50         childif_create ${ifn} && cfg=0
51
52         return $cfg
53 }
54
55 # ifn_stop ifn
56 #       Shutdown and de-configure an interface.  If action is taken,
57 #       print the interface name.
58 #
59 ifn_stop()
60 {
61         local ifn cfg
62         ifn="$1"
63         cfg=1
64
65         [ -z "$ifn" ] && err 1 "ifn_stop called without an interface"
66
67         afexists ipx && ipx_down ${ifn} && cfg=0
68         afexists inet6 && ipv6_down ${ifn} && cfg=0
69         afexists inet && ipv4_down ${ifn} && cfg=0
70         ifconfig_down ${ifn} && cfg=0
71         ifscript_down ${ifn} && cfg=0
72         childif_destroy ${ifn} && cfg=0
73
74         return $cfg
75 }
76
77 # ifconfig_up if
78 #       Evaluate ifconfig(8) arguments for interface $if and
79 #       run ifconfig(8) with those arguments. It returns 0 if
80 #       arguments were found and executed or 1 if the interface
81 #       had no arguments.  Pseudo arguments DHCP and WPA are handled
82 #       here.
83 #
84 ifconfig_up()
85 {
86         local _cfg _ipv6_opts ifconfig_args
87         _cfg=1
88
89         # Make sure lo0 always comes up.
90         if [ "$1" = "lo0" ]; then
91                 _cfg=0
92         fi
93
94         # ifconfig_IF
95         ifconfig_args=`ifconfig_getargs $1`
96         if [ -n "${ifconfig_args}" ]; then
97                 eval ifconfig $1 ${ifconfig_args}
98                 _cfg=0
99         fi
100
101         # inet6 specific
102         if afexists inet6; then
103                 if checkyesno ipv6_activate_all_interfaces; then
104                         _ipv6_opts="-ifdisabled"
105                 elif [ "$1" != "lo0" ]; then
106                         _ipv6_opts="ifdisabled"
107                 fi
108
109                 # backward compatibility: $ipv6_enable
110                 case $ipv6_enable in
111                 [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
112                         _ipv6_opts="${_ipv6_opts} accept_rtadv"
113                         ;;
114                 esac
115
116                 case $ipv6_cpe_wanif in
117                 $1)
118                         _ipv6_opts="${_ipv6_opts} -no_radr accept_rtadv"
119                 ;;
120                 esac
121
122                 if [ -n "${_ipv6_opts}" ]; then
123                         ifconfig $1 inet6 ${_ipv6_opts}
124                 fi
125
126                 # ifconfig_IF_ipv6
127                 ifconfig_args=`ifconfig_getargs $1 ipv6`
128                 if [ -n "${ifconfig_args}" ]; then
129                         # backward compatibility: inet6 keyword
130                         case "${ifconfig_args}" in
131                         :*|[0-9a-fA-F]*:*)
132                                 warn "\$ifconfig_$1_ipv6 needs " \
133                                     "\"inet6\" keyword for an IPv6 address."
134                                 ifconfig_args="inet6 ${ifconfig_args}"
135                         ;;
136                         esac
137                         ifconfig $1 inet6 -ifdisabled
138                         eval ifconfig $1 ${ifconfig_args}
139                         _cfg=0
140                 fi
141
142                 # backward compatiblity: $ipv6_ifconfig_IF
143                 ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF`
144                 if [ -n "${ifconfig_args}" ]; then
145                         warn "\$ipv6_ifconfig_$1 is obsolete." \
146                             "  Use ifconfig_$1_ipv6 instead."
147                         ifconfig $1 inet6 -ifdisabled
148                         eval ifconfig $1 inet6 ${ifconfig_args}
149                         _cfg=0
150                 fi
151         fi
152
153         if [ ${_cfg} -eq 0 ]; then
154                 ifconfig $1 up
155         fi
156
157         if wpaif $1; then
158                 /etc/rc.d/wpa_supplicant start $1
159                 _cfg=0          # XXX: not sure this should count
160         fi
161
162         if dhcpif $1; then
163                 if [ $_cfg -ne 0 ] ; then
164                         ifconfig $1 up
165                 fi
166                 if syncdhcpif $1; then
167                         /etc/rc.d/dhclient start $1
168                 fi
169                 _cfg=0
170         fi
171
172         return $_cfg
173 }
174
175 # ifconfig_down if
176 #       returns 1 if wpa_supplicant or dhclient was stopped or
177 #       the interface exists.
178 #
179 ifconfig_down()
180 {
181         local _cfg
182         _cfg=1
183
184         if wpaif $1; then
185                 /etc/rc.d/wpa_supplicant stop $1
186                 _cfg=0
187         fi
188
189         if dhcpif $1; then
190                 /etc/rc.d/dhclient stop $1
191                 _cfg=0
192         fi
193
194         if ifexists $1; then
195                 ifconfig $1 down
196                 _cfg=0
197         fi
198
199         return $_cfg
200 }
201
202 # get_if_var if var [default]
203 #       Return the value of the pseudo-hash corresponding to $if where
204 #       $var is a string containg the sub-string "IF" which will be
205 #       replaced with $if after the characters defined in _punct are
206 #       replaced with '_'. If the variable is unset, replace it with
207 #       $default if given.
208 get_if_var()
209 {
210         local _if _punct _punct_c _var _default prefix suffix
211
212         if [ $# -ne 2 -a $# -ne 3 ]; then
213                 err 3 'USAGE: get_if_var name var [default]'
214         fi
215
216         _if=$1
217         _punct=". - / +"
218         for _punct_c in $_punct; do
219                 _if=`ltr ${_if} ${_punct_c} '_'`
220         done
221         _var=$2
222         _default=$3
223
224         prefix=${_var%%IF*}
225         suffix=${_var##*IF}
226         eval echo \${${prefix}${_if}${suffix}-${_default}}
227 }
228
229 # _ifconfig_getargs if [af]
230 #       Prints the arguments for the supplied interface to stdout.
231 #       Returns 1 if empty.  In general, ifconfig_getargs should be used
232 #       outside this file.
233 _ifconfig_getargs()
234 {
235         local _ifn _af
236         _ifn=$1
237         _af=${2+_$2}
238
239         if [ -z "$_ifn" ]; then
240                 return 1
241         fi
242
243         get_if_var $_ifn ifconfig_IF$_af "$ifconfig_DEFAULT"
244 }
245
246 # ifconfig_getargs if [af]
247 #       Takes the result from _ifconfig_getargs and removes pseudo
248 #       args such as DHCP and WPA.
249 ifconfig_getargs()
250 {
251         local _tmpargs _arg _args
252         _tmpargs=`_ifconfig_getargs $1 $2`
253         if [ $? -eq 1 ]; then
254                 return 1
255         fi
256         _args=
257
258         for _arg in $_tmpargs; do
259                 case $_arg in
260                 [Dd][Hh][Cc][Pp]) ;;
261                 [Nn][Oo][Aa][Uu][Tt][Oo]) ;;
262                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;;
263                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp]) ;;
264                 [Ww][Pp][Aa]) ;;
265                 *)
266                         _args="$_args $_arg"
267                         ;;
268                 esac
269         done
270
271         echo $_args
272 }
273
274 # autoif
275 #       Returns 0 if the interface should be automatically configured at
276 #       boot time and 1 otherwise.
277 autoif()
278 {
279         local _tmpargs _arg
280         _tmpargs=`_ifconfig_getargs $1`
281
282         for _arg in $_tmpargs; do
283                 case $_arg in
284                 [Nn][Oo][Aa][Uu][Tt][Oo])
285                         return 1
286                         ;;
287                 esac
288         done
289
290         return 0
291 }
292
293 # dhcpif if
294 #       Returns 0 if the interface is a DHCP interface and 1 otherwise.
295 dhcpif()
296 {
297         local _tmpargs _arg
298         _tmpargs=`_ifconfig_getargs $1`
299
300         if noafif $1; then
301                 return 1
302         fi
303
304         for _arg in $_tmpargs; do
305                 case $_arg in
306                 [Dd][Hh][Cc][Pp])
307                         return 0
308                         ;;
309                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
310                         return 0
311                         ;;
312                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
313                         return 0
314                         ;;
315                 esac
316         done
317
318         return 1
319 }
320
321 # syncdhcpif
322 #       Returns 0 if the interface should be configured synchronously and
323 #       1 otherwise.
324 syncdhcpif()
325 {
326         local _tmpargs _arg
327         _tmpargs=`_ifconfig_getargs $1`
328
329         if noafif $1; then
330                 return 1
331         fi
332
333         for _arg in $_tmpargs; do
334                 case $_arg in
335                 [Nn][Oo][Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
336                         return 1
337                         ;;
338                 [Ss][Yy][Nn][Cc][Dd][Hh][Cc][Pp])
339                         return 0
340                         ;;
341                 esac
342         done
343
344         checkyesno synchronous_dhclient
345 }
346
347 # wpaif if
348 #       Returns 0 if the interface is a WPA interface and 1 otherwise.
349 wpaif()
350 {
351         local _tmpargs _arg
352         _tmpargs=`_ifconfig_getargs $1`
353
354         for _arg in $_tmpargs; do
355                 case $_arg in
356                 [Ww][Pp][Aa])
357                         return 0
358                         ;;
359                 esac
360         done
361
362         return 1
363 }
364
365 # afexists af
366 #       Returns 0 if the address family is enabled in the kernel
367 #       1 otherwise.
368 afexists()
369 {
370         local _af
371         _af=$1
372
373         case ${_af} in
374         inet|inet6)
375                 check_kern_features ${_af}
376                 ;;
377         ipx)
378                 ${SYSCTL_N} net.ipx > /dev/null 2>&1
379                 ;;
380         atm)
381                 if [ -x /sbin/atmconfig ]; then
382                         /sbin/atmconfig diag list > /dev/null 2>&1
383                 else
384                         return 1
385                 fi
386                 ;;
387         *)
388                 err 1 "afexists(): Unsupported address family: $_af"
389                 ;;
390         esac
391 }
392
393 # noafif if
394 #       Returns 0 if the interface has no af configuration and 1 otherwise.
395 noafif()
396 {
397         local _if
398         _if=$1
399
400         case $_if in
401         pflog[0-9]*|\
402         pfsync[0-9]*|\
403         an[0-9]*|\
404         ath[0-9]*|\
405         ipw[0-9]*|\
406         ipfw[0-9]*|\
407         iwi[0-9]*|\
408         iwn[0-9]*|\
409         ral[0-9]*|\
410         wi[0-9]*|\
411         wl[0-9]*|\
412         wpi[0-9]*)
413                 return 0
414                 ;;
415         esac
416
417         return 1
418 }
419
420 # ipv6if if
421 #       Returns 0 if the interface should be configured for IPv6 and
422 #       1 otherwise.
423 ipv6if()
424 {
425         local _if _tmpargs i
426         _if=$1
427
428         if ! afexists inet6; then
429                 return 1
430         fi
431
432         # lo0 is always IPv6-enabled
433         case $_if in
434         lo0)
435                 return 0
436                 ;;
437         esac
438
439         case "${ipv6_network_interfaces}" in
440         $_if|"$_if "*|*" $_if"|*" $_if "*|[Aa][Uu][Tt][Oo])
441                 # True if $ifconfig_IF_ipv6 is defined.
442                 _tmpargs=`_ifconfig_getargs $_if ipv6`
443                 if [ -n "${_tmpargs}" ]; then
444                         return 0
445                 fi
446
447                 # backward compatibility: True if $ipv6_ifconfig_IF is defined.
448                 _tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
449                 if [ -n "${_tmpargs}" ]; then
450                         return 0
451                 fi
452                 ;;
453         esac
454
455         return 1
456 }
457
458 # ipv6_autoconfif if
459 #       Returns 0 if the interface should be configured for IPv6 with
460 #       Stateless Address Configuration; 1 otherwise.
461 ipv6_autoconfif()
462 {
463         local _if _tmpargs _arg
464         _if=$1
465
466         case $_if in
467         lo0|\
468         stf[0-9]*|\
469         faith[0-9]*|\
470         lp[0-9]*|\
471         sl[0-9]*)
472                 return 1
473                 ;;
474         esac
475         if noafif $_if; then
476                 return 1
477         fi
478         if ! ipv6if $_if; then
479                 return 1
480         fi
481         if checkyesno ipv6_gateway_enable; then
482                 return 1
483         fi
484         _tmpargs=`get_if_var $_if ipv6_prefix_IF`
485         if [ -n "${_tmpargs}" ]; then
486                 return 1
487         fi
488         # backward compatibility: $ipv6_enable
489         case $ipv6_enable in
490         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
491                 return 0
492         ;;
493         esac
494
495         _tmpargs=`_ifconfig_getargs $_if ipv6`
496         for _arg in $_tmpargs; do
497                 case $_arg in
498                 accept_rtadv)
499                         return 0
500                         ;;
501                 esac
502         done
503
504         # backward compatibility: $ipv6_ifconfig_IF
505         _tmpargs=`get_if_var $_if ipv6_ifconfig_IF`
506         for _arg in $_tmpargs; do
507                 case $_arg in
508                 accept_rtadv)
509                         return 0
510                         ;;
511                 esac
512         done
513
514         return 1
515 }
516
517 # ifexists if
518 #       Returns 0 if the interface exists and 1 otherwise.
519 ifexists()
520 {
521         [ -z "$1" ] && return 1
522         ifconfig -n $1 > /dev/null 2>&1
523 }
524
525 # ipv4_up if
526 #       add IPv4 addresses to the interface $if
527 ipv4_up()
528 {
529         local _if _ret
530         _if=$1
531         _ret=1
532
533         # Add 127.0.0.1/8 to lo0 unless otherwise specified.
534         if [ "${_if}" = "lo0" ]; then
535                 ifconfig_args=`ifconfig_getargs ${_if}`
536                 if [ -z "${ifconfig_args}" ]; then
537                         ifconfig ${_if} inet 127.0.0.1/8 alias
538                 fi
539         fi
540         ifalias_up ${_if} inet && _ret=0
541         ipv4_addrs_common ${_if} alias && _ret=0
542
543         return $_ret
544 }
545
546 # ipv6_up if
547 #       add IPv6 addresses to the interface $if
548 ipv6_up()
549 {
550         local _if _ret
551         _if=$1
552         _ret=1
553
554         if ! ipv6if $_if; then
555                 return 0
556         fi
557
558         ifalias_up ${_if} inet6 && _ret=0
559         ipv6_prefix_hostid_addr_up ${_if} && _ret=0
560         ipv6_accept_rtadv_up ${_if} && _ret=0
561
562         # wait for DAD
563         sleep `${SYSCTL_N} net.inet6.ip6.dad_count`
564         sleep 1
565
566         return $_ret
567 }
568
569 # ipv4_down if
570 #       remove IPv4 addresses from the interface $if
571 ipv4_down()
572 {
573         local _if _ifs _ret inetList oldifs _inet
574         _if=$1
575         _ifs="^"
576         _ret=1
577
578         inetList="`ifconfig ${_if} | grep 'inet ' | tr "\n" "$_ifs"`"
579
580         oldifs="$IFS"
581         IFS="$_ifs"
582         for _inet in $inetList ; do
583                 # get rid of extraneous line
584                 [ -z "$_inet" ] && break
585
586                 _inet=`expr "$_inet" : '.*\(inet \([0-9]\{1,3\}\.\)\{3\}[0-9]\{1,3\}\).*'`
587
588                 IFS="$oldifs"
589                 ifconfig ${_if} ${_inet} delete
590                 IFS="$_ifs"
591                 _ret=0
592         done
593         IFS="$oldifs"
594
595         ifalias_down ${_if} inet && _ret=0
596         ipv4_addrs_common ${_if} -alias && _ret=0
597
598         return $_ret
599 }
600
601 # ipv6_down if
602 #       remove IPv6 addresses from the interface $if
603 ipv6_down()
604 {
605         local _if _ifs _ret inetList oldifs _inet6
606         _if=$1
607         _ifs="^"
608         _ret=1
609
610         if ! ipv6if $_if; then
611                 return 0
612         fi
613
614         ipv6_accept_rtadv_down ${_if} && _ret=0
615         ifalias_down ${_if} inet6 && _ret=0
616
617         inetList="`ifconfig ${_if} | grep 'inet6 ' | tr "\n" "$_ifs"`"
618
619         oldifs="$IFS"
620         IFS="$_ifs"
621         for _inet6 in $inetList ; do
622                 # get rid of extraneous line
623                 [ -z "$_inet6" ] && break
624
625                 _inet6=`expr "$_inet6" : '.*\(inet6 \([0-9a-f:]*\)\).*'`
626
627                 IFS="$oldifs"
628                 ifconfig ${_if} ${_inet6} -alias
629                 IFS="$_ifs"
630                 _ret=0
631         done
632         IFS="$oldifs"
633
634         return $_ret
635 }
636
637 # ipv4_addrs_common if action
638 #       Evaluate the ifconfig_if_ipv4 arguments for interface $if and
639 #       use $action to add or remove IPv4 addresses from $if.
640 ipv4_addrs_common()
641 {
642         local _ret _if _action _cidr _cidr_addr
643         local _ipaddr _netmask _range _ipnet _iplow _iphigh _ipcount
644         _ret=1
645         _if=$1
646         _action=$2
647
648         # get ipv4-addresses
649         cidr_addr=`get_if_var $_if ipv4_addrs_IF`
650
651         for _cidr in ${cidr_addr}; do
652                 _ipaddr=${_cidr%%/*}
653                 _netmask="/"${_cidr##*/}
654                 _range=${_ipaddr##*.}
655                 _ipnet=${_ipaddr%.*}
656                 _iplow=${_range%-*}
657                 _iphigh=${_range#*-}
658
659                 # clear netmask when removing aliases
660                 if [ "${_action}" = "-alias" ]; then
661                         _netmask=""
662                 fi
663
664                 _ipcount=${_iplow}
665                 while [ "${_ipcount}" -le "${_iphigh}" ]; do
666                         eval "ifconfig ${_if} ${_action} ${_ipnet}.${_ipcount}${_netmask}"
667                         _ipcount=$((${_ipcount}+1))
668                         _ret=0
669
670                         # only the first ipaddr in a subnet need the real netmask
671                         if [ "${_action}" != "-alias" ]; then
672                                 _netmask="/32"
673                         fi
674                 done
675         done
676
677         return $_ret
678 }
679
680 # ifalias_up if af
681 #       Configure aliases for network interface $if.
682 #       It returns 0 if at least one alias was configured or
683 #       1 if there were none.
684 #
685 ifalias_up()
686 {
687         local _ret
688         _ret=1
689
690         case "$2" in
691         inet)
692                 _ret=`ifalias_ipv4_up "$1"`
693                 ;;
694         inet6)
695                 _ret=`ifalias_ipv6_up "$1"`
696                 ;;
697         esac
698
699         return $_ret
700 }
701
702 # ifalias_ipv4_up if
703 #       Helper function for ifalias_up().  Handles IPv4.
704 #
705 ifalias_ipv4_up()
706 {
707         local _ret alias ifconfig_args
708         _ret=1
709
710         # ifconfig_IF_aliasN which starts with "inet"
711         alias=0
712         while : ; do
713                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
714                 case "${ifconfig_args}" in
715                 inet\ *)
716                         ifconfig $1 ${ifconfig_args} alias && _ret=0
717                         ;;
718                 "")
719                         break
720                         ;;
721                 esac
722                 alias=$((${alias} + 1))
723         done
724
725         return $_ret
726 }
727
728 # ifalias_ipv6_up if
729 #       Helper function for ifalias_up().  Handles IPv6.
730 #
731 ifalias_ipv6_up()
732 {
733         local _ret alias ifconfig_args
734         _ret=1
735
736         # ifconfig_IF_aliasN which starts with "inet6"
737         alias=0
738         while : ; do
739                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
740                 case "${ifconfig_args}" in
741                 inet6\ *)
742                         ifconfig $1 ${ifconfig_args} alias && _ret=0
743                         ;;
744                 "")
745                         break
746                         ;;
747                 esac
748                 alias=$((${alias} + 1))
749         done
750
751         # backward compatibility: ipv6_ifconfig_IF_aliasN.
752         alias=0
753         while : ; do
754                 ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF_alias${alias}`
755                 case "${ifconfig_args}" in
756                 "")
757                         break
758                         ;;
759                 *)
760                         ifconfig $1 inet6 ${ifconfig_args} alias && _ret=0
761                         warn "\$ipv6_ifconfig_$1_alias${alias} is obsolete." \
762                             "  Use ifconfig_$1_aliasN instead."
763                         ;;
764                 esac
765                 alias=$((${alias} + 1))
766         done
767
768         return $_ret
769 }
770
771 # ifalias_down if af
772 #       Remove aliases for network interface $if.
773 #       It returns 0 if at least one alias was removed or
774 #       1 if there were none.
775 #
776 ifalias_down()
777 {
778         local _ret
779         _ret=1
780
781         case "$2" in
782         inet)
783                 _ret=`ifalias_ipv4_down "$1"`
784                 ;;
785         inet6)
786                 _ret=`ifalias_ipv6_down "$1"`
787                 ;;
788         esac
789
790         return $_ret
791 }
792
793 # ifalias_ipv4_down if
794 #       Helper function for ifalias_down().  Handles IPv4.
795 #
796 ifalias_ipv4_down()
797 {
798         local _ret alias ifconfig_args
799         _ret=1
800
801         # ifconfig_IF_aliasN which starts with "inet"
802         alias=0
803         while : ; do
804                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
805                 case "${ifconfig_args}" in
806                 inet\ *)
807                         ifconfig $1 ${ifconfig_args} -alias && _ret=0
808                         ;;
809                 "")
810                         break
811                         ;;
812                 esac
813                 alias=$((${alias} + 1))
814         done
815
816         return $_ret
817 }
818
819 # ifalias_ipv6_down if
820 #       Helper function for ifalias_down().  Handles IPv6.
821 #
822 ifalias_ipv6_down()
823 {
824         local _ret alias ifconfig_args
825         _ret=1
826
827         # ifconfig_IF_aliasN which starts with "inet6"
828         alias=0
829         while : ; do
830                 ifconfig_args=`get_if_var $1 ifconfig_IF_alias${alias}`
831                 case "${ifconfig_args}" in
832                 inet6\ *)
833                         ifconfig $1 ${ifconfig_args} -alias && _ret=0
834                         ;;
835                 "")
836                         break
837                         ;;
838                 esac
839                 alias=$((${alias} + 1))
840         done
841
842         # backward compatibility: ipv6_ifconfig_IF_aliasN.
843         alias=0
844         while : ; do
845                 ifconfig_args=`get_if_var $1 ipv6_ifconfig_IF_alias${alias}`
846                 case "${ifconfig_args}" in
847                 "")
848                         break
849                         ;;
850                 *)
851                         ifconfig $1 inet6 ${ifconfig_args} -alias && _ret=0
852                         warn "\$ipv6_ifconfig_$1_alias${alias} is obsolete." \
853                             "  Use ifconfig_$1_aliasN instead."
854                         ;;
855                 esac
856                 alias=$((${alias} + 1))
857         done
858
859         return $_ret
860 }
861
862 # ipv6_prefix_hostid_addr_up if
863 #       add IPv6 prefix + hostid addr to the interface $if
864 ipv6_prefix_hostid_addr_up()
865 {
866         local _if prefix laddr hostid j address
867         _if=$1
868         prefix=`get_if_var ${_if} ipv6_prefix_IF`
869
870         if [ -n "${prefix}" ]; then
871                 laddr=`network6_getladdr ${_if}`
872                 hostid=${laddr#fe80::}
873                 hostid=${hostid%\%*}
874
875                 for j in ${prefix}; do
876                         address=$j\:${hostid}
877                         ifconfig ${_if} inet6 ${address} prefixlen 64 alias
878
879                         # if I am a router, add subnet router
880                         # anycast address (RFC 2373).
881                         if checkyesno ipv6_gateway_enable; then
882                                 ifconfig ${_if} inet6 $j:: prefixlen 64 \
883                                         alias anycast
884                         fi
885                 done
886         fi
887 }
888
889 # ipv6_accept_rtadv_up if
890 #       Enable accepting Router Advertisement and send Router
891 #       Solicitation message
892 ipv6_accept_rtadv_up()
893 {
894         if ipv6_autoconfif $1; then
895                 ifconfig $1 inet6 accept_rtadv up
896                 if ! checkyesno rtsold_enable; then
897                         rtsol ${rtsol_flags} $1
898                 fi
899         fi
900 }
901
902 # ipv6_accept_rtadv_down if
903 #       Disable accepting Router Advertisement
904 ipv6_accept_rtadv_down()
905 {
906         if ipv6_autoconfif $1; then
907                 ifconfig $1 inet6 -accept_rtadv
908         fi
909 }
910
911 # ifscript_up if
912 #       Evaluate a startup script for the $if interface.
913 #       It returns 0 if a script was found and processed or
914 #       1 if no script was found.
915 #
916 ifscript_up()
917 {
918         if [ -r /etc/start_if.$1 ]; then
919                 . /etc/start_if.$1
920                 return 0
921         else
922                 return 1
923         fi
924 }
925
926 # ifscript_down if
927 #       Evaluate a shutdown script for the $if interface.
928 #       It returns 0 if a script was found and processed or
929 #       1 if no script was found.
930 #
931 ifscript_down()
932 {
933         if [ -r /etc/stop_if.$1 ]; then
934                 . /etc/stop_if.$1
935                 return 0
936         else
937                 return 1
938         fi
939 }
940
941 # clone_up
942 #       Create cloneable interfaces.
943 #
944 clone_up()
945 {
946         local _prefix _list ifn
947         _prefix=
948         _list=
949
950         # create_args_IF
951         for ifn in ${cloned_interfaces}; do
952                 ifconfig ${ifn} create `get_if_var ${ifn} create_args_IF`
953                 if [ $? -eq 0 ]; then
954                         _list="${_list}${_prefix}${ifn}"
955                         [ -z "$_prefix" ] && _prefix=' '
956                 fi
957         done
958         debug "Cloned: ${_list}"
959 }
960
961 # clone_down
962 #       Destroy cloned interfaces. Destroyed interfaces are echoed to
963 #       standard output.
964 #
965 clone_down()
966 {
967         local _prefix _list ifn
968         _prefix=
969         _list=
970
971         for ifn in ${cloned_interfaces}; do
972                 ifconfig -n ${ifn} destroy
973                 if [ $? -eq 0 ]; then
974                         _list="${_list}${_prefix}${ifn}"
975                         [ -z "$_prefix" ] && _prefix=' '
976                 fi
977         done
978         debug "Destroyed clones: ${_list}"
979 }
980
981 # childif_create
982 #       Create and configure child interfaces.  Return 0 if child
983 #       interfaces are created.
984 #
985 childif_create()
986 {
987         local cfg child child_vlans child_wlans create_args debug_flags ifn i
988         cfg=1
989         ifn=$1
990
991         # Create wireless interfaces
992         child_wlans=`get_if_var $ifn wlans_IF`
993
994         for child in ${child_wlans}; do
995                 create_args="wlandev $ifn `get_if_var $child create_args_IF`"
996                 debug_flags="`get_if_var $child wlandebug_IF`"
997
998                 if expr $child : 'wlan[0-9][0-9]*$' >/dev/null 2>&1; then
999                         ifconfig $child create ${create_args} && cfg=0
1000                         if [ -n "${debug_flags}" ]; then
1001                                 wlandebug -i $child ${debug_flags}
1002                         fi
1003                 else
1004                         i=`ifconfig wlan create ${create_args}`
1005                         if [ -n "${debug_flags}" ]; then
1006                                 wlandebug -i $i ${debug_flags}
1007                         fi
1008                         ifconfig $i name $child && cfg=0
1009                 fi
1010                 if autoif $child; then
1011                         ifn_start $child
1012                 fi
1013         done
1014
1015         # Create vlan interfaces
1016         child_vlans=`get_if_var $ifn vlans_IF`
1017
1018         if [ -n "${child_vlans}" ]; then
1019                 load_kld if_vlan
1020         fi
1021
1022         for child in ${child_vlans}; do
1023                 if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
1024                         child="${ifn}.${child}"
1025                         create_args=`get_if_var $child create_args_IF`
1026                         ifconfig $child create ${create_args} && cfg=0
1027                 else
1028                         create_args="vlandev $ifn `get_if_var $child create_args_IF`"
1029                         if expr $child : 'vlan[0-9][0-9]*$' >/dev/null 2>&1; then
1030                                 ifconfig $child create ${create_args} && cfg=0
1031                         else
1032                                 i=`ifconfig vlan create ${create_args}`
1033                                 ifconfig $i name $child && cfg=0
1034                         fi
1035                 fi
1036                 if autoif $child; then
1037                         ifn_start $child
1038                 fi
1039         done
1040
1041         return ${cfg}
1042 }
1043
1044 # childif_destroy
1045 #       Destroy child interfaces.
1046 #
1047 childif_destroy()
1048 {
1049         local cfg child child_vlans child_wlans ifn
1050         cfg=1
1051
1052         child_wlans=`get_if_var $ifn wlans_IF`
1053         for child in ${child_wlans}; do
1054                 if ! ifexists $child; then
1055                         continue
1056                 fi
1057                 ifconfig -n $child destroy && cfg=0
1058         done
1059
1060         child_vlans=`get_if_var $ifn vlans_IF`
1061         for child in ${child_vlans}; do
1062                 if expr $child : '[1-9][0-9]*$' >/dev/null 2>&1; then
1063                         child="${ifn}.${child}"
1064                 fi
1065                 if ! ifexists $child; then
1066                         continue
1067                 fi
1068                 ifconfig -n $child destroy && cfg=0
1069         done
1070
1071         return ${cfg}
1072 }
1073
1074 # ng_mkpeer
1075 #       Create netgraph nodes.
1076 #
1077 ng_mkpeer()
1078 {
1079         ngctl -f - 2> /dev/null <<EOF
1080 mkpeer $*
1081 msg dummy nodeinfo
1082 EOF
1083 }
1084
1085 # ng_create_one
1086 #       Create netgraph nodes.
1087 #
1088 ng_create_one()
1089 {
1090         local t
1091
1092         ng_mkpeer $* | while read line; do
1093                 t=`expr "${line}" : '.* name="\([a-z]*[0-9]*\)" .*'`
1094                 if [ -n "${t}" ]; then
1095                         echo ${t}
1096                         return
1097                 fi
1098         done
1099 }
1100
1101 # gif_up
1102 #       Create gif(4) tunnel interfaces.
1103 gif_up()
1104 {
1105         local i peers
1106
1107         for i in ${gif_interfaces}; do
1108                 peers=`get_if_var $i gifconfig_IF`
1109                 case ${peers} in
1110                 '')
1111                         continue
1112                         ;;
1113                 *)
1114                         if expr $i : 'gif[0-9][0-9]*$' >/dev/null 2>&1; then
1115                                 ifconfig $i create >/dev/null 2>&1
1116                         else
1117                                 gif=`ifconfig gif create`
1118                                 ifconfig $gif name $i
1119                         fi
1120                         ifconfig $i tunnel ${peers}
1121                         ifconfig $i up
1122                         ;;
1123                 esac
1124         done
1125 }
1126
1127 # ng_fec_create ifn
1128 #       Configure Fast EtherChannel for interface $ifn. Returns 0 if
1129 #       FEC arguments were found and configured; returns !0 otherwise.
1130 ng_fec_create()
1131 {
1132          local req_iface iface bogus
1133          req_iface="$1"
1134
1135          ngctl shutdown ${req_iface}: > /dev/null 2>&1
1136
1137          bogus=""
1138          while true; do
1139                  iface=`ng_create_one fec dummy fec`
1140                  if [ -z "${iface}" ]; then
1141                          exit 2
1142                  fi
1143                  if [ "${iface}" = "${req_iface}" ]; then
1144                          break
1145                  fi
1146                  bogus="${bogus} ${iface}"
1147          done
1148
1149          for iface in ${bogus}; do
1150                  ngctl shutdown ${iface}:
1151          done
1152 }
1153
1154 # fec_up
1155 #       Create Fast EtherChannel interfaces.
1156 fec_up()
1157 {
1158         local i j
1159
1160         for i in ${fec_interfaces}; do
1161                 ng_fec_create $i
1162                 for j in `get_if_var $i fecconfig_IF`; do
1163                         case ${j} in
1164                         '')
1165                                 continue
1166                                 ;;
1167                         *)
1168                                 ngctl msg ${i}: add_iface "\"${j}\""
1169                                 ;;
1170                         esac
1171                 done
1172         done
1173 }
1174
1175 # ipx_up ifn
1176 #       Configure any IPX addresses for interface $ifn. Returns 0 if
1177 #       IPX arguments were found and configured; returns 1 otherwise.
1178 #
1179 ipx_up()
1180 {
1181         local ifn
1182         ifn="$1"
1183
1184         # ifconfig_IF_ipx
1185         ifconfig_args=`_ifconfig_getargs $ifn ipx`
1186         if [ -n "${ifconfig_args}" ]; then
1187                 ifconfig ${ifn} ${ifconfig_args}
1188                 return 0
1189         fi
1190
1191         return 1
1192 }
1193
1194 # ipx_down ifn
1195 #       Remove IPX addresses for interface $ifn. Returns 0 if IPX
1196 #       addresses were found and unconfigured. It returns 1, otherwise.
1197 #
1198 ipx_down()
1199 {
1200         local _if _ifs _ret ipxList oldifs _ipx
1201         _if=$1
1202         _ifs="^"
1203         _ret=1
1204         ipxList="`ifconfig ${_if} | grep 'ipx ' | tr "\n" "$_ifs"`"
1205         oldifs="$IFS"
1206
1207         IFS="$_ifs"
1208         for _ipx in $ipxList ; do
1209                 # get rid of extraneous line
1210                 [ -z "$_ipx" ] && break
1211
1212                 _ipx=`expr "$_ipx" : '.*\(ipx [0-9a-h]\{1,8\}H*\.[0-9a-h]\{1,12\}\).*'`
1213
1214                 IFS="$oldifs"
1215                 ifconfig ${_if} ${_ipx} delete
1216                 IFS="$_ifs"
1217                 _ret=0
1218         done
1219         IFS="$oldifs"
1220
1221         return $_ret
1222 }
1223
1224 # ifnet_rename
1225 #       Rename all requested interfaces.
1226 #
1227 ifnet_rename()
1228 {
1229         local _if _ifname
1230
1231         # ifconfig_IF_name
1232         for _if in `ifconfig -l`; do
1233                 _ifname=`get_if_var $_if ifconfig_IF_name`
1234                 if [ ! -z "$_ifname" ]; then
1235                         ifconfig $_if name $_ifname
1236                 fi
1237         done
1238
1239         return 0
1240 }
1241
1242 # list_net_interfaces type
1243 #       List all network interfaces. The type of interface returned
1244 #       can be controlled by the type argument. The type
1245 #       argument can be any of the following:
1246 #               nodhcp  - all interfaces, excluding DHCP configured interfaces
1247 #               dhcp    - list only DHCP configured interfaces
1248 #               noautoconf      - all interfaces, excluding IPv6 Stateless
1249 #                                 Address Autoconf configured interfaces
1250 #               autoconf        - list only IPv6 Stateless Address Autoconf
1251 #                                 configured interfaces
1252 #       If no argument is specified all network interfaces are output.
1253 #       Note that the list will include cloned interfaces if applicable.
1254 #       Cloned interfaces must already exist to have a chance to appear
1255 #       in the list if ${network_interfaces} is set to `auto'.
1256 #
1257 list_net_interfaces()
1258 {
1259         local type _tmplist _list _autolist _lo _if
1260         type=$1
1261
1262         # Get a list of ALL the interfaces and make lo0 first if it's there.
1263         #
1264         _tmplist=
1265         case ${network_interfaces} in
1266         [Aa][Uu][Tt][Oo])
1267                 _autolist="`ifconfig -l`"
1268                 _lo=
1269                 for _if in ${_autolist} ; do
1270                         if autoif $_if; then
1271                                 if [ "$_if" = "lo0" ]; then
1272                                         _lo="lo0 "
1273                                 else
1274                                         _tmplist="${_tmplist} ${_if}"
1275                                 fi
1276                         fi
1277                 done
1278                 _tmplist="${_lo}${_tmplist# }"
1279                 ;;
1280         *)
1281                 _tmplist="${network_interfaces} ${cloned_interfaces}"
1282
1283                 # lo0 is effectively mandatory, so help prevent foot-shooting
1284                 #
1285                 case "$_tmplist" in
1286                 lo0|'lo0 '*|*' lo0'|*' lo0 '*) ;; # This is fine, do nothing
1287                 *)      _tmplist="lo0 ${_tmplist}" ;;
1288                 esac
1289                 ;;
1290         esac
1291
1292         _list=
1293         case "$type" in
1294         nodhcp)
1295                 for _if in ${_tmplist} ; do
1296                         if ! dhcpif $_if && \
1297                            [ -n "`_ifconfig_getargs $_if`" ]; then
1298                                 _list="${_list# } ${_if}"
1299                         fi
1300                 done
1301                 ;;
1302         dhcp)
1303                 for _if in ${_tmplist} ; do
1304                         if dhcpif $_if; then
1305                                 _list="${_list# } ${_if}"
1306                         fi
1307                 done
1308                 ;;
1309         noautoconf)
1310                 for _if in ${_tmplist} ; do
1311                         if ! ipv6_autoconfif $_if && \
1312                            [ -n "`_ifconfig_getargs $_if ipv6`" ]; then
1313                                 _list="${_list# } ${_if}"
1314                         fi
1315                 done
1316                 ;;
1317         autoconf)
1318                 for _if in ${_tmplist} ; do
1319                         if ipv6_autoconfif $_if; then
1320                                 _list="${_list# } ${_if}"
1321                         fi
1322                 done
1323                 ;;
1324         *)
1325                 _list=${_tmplist}
1326                 ;;
1327         esac
1328
1329         echo $_list
1330
1331         return 0
1332 }
1333
1334 # get_default_if -address_family
1335 #       Get the interface of the default route for the given address family.
1336 #       The -address_family argument must be suitable passing to route(8).
1337 #
1338 get_default_if()
1339 {
1340         local routeget oldifs defif line
1341         defif=
1342         oldifs="$IFS"
1343         IFS="
1344 "
1345         for line in `route -n get $1 default 2>/dev/null`; do
1346                 case $line in
1347                 *interface:*)
1348                         defif=${line##*: }
1349                         ;;
1350                 esac
1351         done
1352         IFS=${oldifs}
1353
1354         echo $defif
1355 }
1356
1357 # hexdigit arg
1358 #       Echo decimal number $arg (single digit) in hexadecimal format.
1359 hexdigit()
1360 {
1361         printf '%x\n' "$1"
1362 }
1363
1364 # hexprint arg
1365 #       Echo decimal number $arg (multiple digits) in hexadecimal format.
1366 hexprint()
1367 {
1368         printf '%x\n' "$1"
1369 }
1370
1371 is_wired_interface()
1372 {
1373         local media
1374
1375         case `ifconfig $1 2>/dev/null` in
1376         *media:?Ethernet*) media=Ethernet ;;
1377         esac
1378
1379         test "$media" = "Ethernet"
1380 }
1381
1382 # network6_getladdr if [flag]
1383 #       Echo link-local address from $if if any.
1384 #       If flag is defined, tentative ones will be excluded.
1385 network6_getladdr()
1386 {
1387         local proto addr rest
1388         ifconfig $1 2>/dev/null | while read proto addr rest; do
1389                 case ${proto} in
1390                 inet6)
1391                         case ${addr} in
1392                         fe80::*)
1393                                 if [ -z "$2" ]; then
1394                                         echo ${addr}
1395                                         return
1396                                 fi
1397                                 case ${rest} in
1398                                 *tentative*)
1399                                         continue
1400                                         ;;
1401                                 *)
1402                                         echo ${addr}
1403                                         return
1404                                 esac
1405                         esac
1406                 esac
1407         done
1408 }