sys/cam/cam_periph.c

   1 /*-
   2  * Common functions for CAM "type" (peripheral) drivers.
   3  *
   4  * Copyright (c) 1997, 1998 Justin T. Gibbs.
   5  * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry.
   6  * All rights reserved.
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions
  10  * are met:
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions, and the following disclaimer,
  13  *    without modification, immediately at the beginning of the file.
  14  * 2. The name of the author may not be used to endorse or promote products
  15  *    derived from this software without specific prior written permission.
  16  *
  17  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  20  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
  21  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  27  * SUCH DAMAGE.
  28  */
  29
  30 #include <sys/cdefs.h>
  31 __FBSDID("$FreeBSD$");
  32
  33 #include <sys/param.h>
  34 #include <sys/systm.h>
  35 #include <sys/types.h>
  36 #include <sys/malloc.h>
  37 #include <sys/kernel.h>
  38 #include <sys/bio.h>
  39 #include <sys/lock.h>
  40 #include <sys/mutex.h>
  41 #include <sys/buf.h>
  42 #include <sys/proc.h>
  43 #include <sys/devicestat.h>
  44 #include <sys/bus.h>
  45 #include <sys/sbuf.h>
  46 #include <vm/vm.h>
  47 #include <vm/vm_extern.h>
  48
  49 #include <cam/cam.h>
  50 #include <cam/cam_ccb.h>
  51 #include <cam/cam_queue.h>
  52 #include <cam/cam_xpt_periph.h>
  53 #include <cam/cam_periph.h>
  54 #include <cam/cam_debug.h>
  55 #include <cam/cam_sim.h>
  56
  57 #include <cam/scsi/scsi_all.h>
  58 #include <cam/scsi/scsi_message.h>
  59 #include <cam/scsi/scsi_pass.h>
  60
  61 static  u_int           camperiphnextunit(struct periph_driver *p_drv,
  62                                           u_int newunit, int wired,
  63                                           path_id_t pathid, target_id_t target,
  64                                           lun_id_t lun);
  65 static  u_int           camperiphunit(struct periph_driver *p_drv,
  66                                       path_id_t pathid, target_id_t target,
  67                                       lun_id_t lun);
  68 static  void            camperiphdone(struct cam_periph *periph,
  69                                         union ccb *done_ccb);
  70 static  void            camperiphfree(struct cam_periph *periph);
  71 static int              camperiphscsistatuserror(union ccb *ccb,
  72                                                  cam_flags camflags,
  73                                                  u_int32_t sense_flags,
  74                                                  int *openings,
  75                                                  u_int32_t *relsim_flags,
  76                                                  u_int32_t *timeout,
  77                                                  const char **action_string);
  78 static  int             camperiphscsisenseerror(union ccb *ccb,
  79                                                 cam_flags camflags,
  80                                                 u_int32_t sense_flags,
  81                                                 int *openings,
  82                                                 u_int32_t *relsim_flags,
  83                                                 u_int32_t *timeout,
  84                                                 const char **action_string);
  85
  86 static int nperiph_drivers;
  87 static int initialized = 0;
  88 struct periph_driver **periph_drivers;
  89
  90 MALLOC_DEFINE(M_CAMPERIPH, "CAM periph", "CAM peripheral buffers");
  91
  92 static int periph_selto_delay = 1000;
  93 TUNABLE_INT("kern.cam.periph_selto_delay", &periph_selto_delay);
  94 static int periph_noresrc_delay = 500;
  95 TUNABLE_INT("kern.cam.periph_noresrc_delay", &periph_noresrc_delay);
  96 static int periph_busy_delay = 500;
  97 TUNABLE_INT("kern.cam.periph_busy_delay", &periph_busy_delay);
  98
  99
 100 void
 101 periphdriver_register(void *data)
 102 {
 103         struct periph_driver *drv = (struct periph_driver *)data;
 104         struct periph_driver **newdrivers, **old;
 105         int ndrivers;
 106
 107         ndrivers = nperiph_drivers + 2;
 108         newdrivers = malloc(sizeof(*newdrivers) * ndrivers, M_CAMPERIPH,
 109                             M_WAITOK);
 110         if (periph_drivers)
 111                 bcopy(periph_drivers, newdrivers,
 112                       sizeof(*newdrivers) * nperiph_drivers);
 113         newdrivers[nperiph_drivers] = drv;
 114         newdrivers[nperiph_drivers + 1] = NULL;
 115         old = periph_drivers;
 116         periph_drivers = newdrivers;
 117         if (old)
 118                 free(old, M_CAMPERIPH);
 119         nperiph_drivers++;
 120         /* If driver marked as early or it is late now, initialize it. */
 121         if (((drv->flags & CAM_PERIPH_DRV_EARLY) != 0 && initialized > 0) ||
 122             initialized > 1)
 123                 (*drv->init)();
 124 }
 125
 126 void
 127 periphdriver_init(int level)
 128 {
 129         int     i, early;
 130
 131         initialized = max(initialized, level);
 132         for (i = 0; periph_drivers[i] != NULL; i++) {
 133                 early = (periph_drivers[i]->flags & CAM_PERIPH_DRV_EARLY) ? 1 : 2;
 134                 if (early == initialized)
 135                         (*periph_drivers[i]->init)();
 136         }
 137 }
 138
 139 cam_status
 140 cam_periph_alloc(periph_ctor_t *periph_ctor,
 141                  periph_oninv_t *periph_oninvalidate,
 142                  periph_dtor_t *periph_dtor, periph_start_t *periph_start,
 143                  char *name, cam_periph_type type, struct cam_path *path,
 144                  ac_callback_t *ac_callback, ac_code code, void *arg)
 145 {
 146         struct          periph_driver **p_drv;
 147         struct          cam_sim *sim;
 148         struct          cam_periph *periph;
 149         struct          cam_periph *cur_periph;
 150         path_id_t       path_id;
 151         target_id_t     target_id;
 152         lun_id_t        lun_id;
 153         cam_status      status;
 154         u_int           init_level;
 155
 156         init_level = 0;
 157         /*
 158          * Handle Hot-Plug scenarios.  If there is already a peripheral
 159          * of our type assigned to this path, we are likely waiting for
 160          * final close on an old, invalidated, peripheral.  If this is
 161          * the case, queue up a deferred call to the peripheral's async
 162          * handler.  If it looks like a mistaken re-allocation, complain.
 163          */
 164         if ((periph = cam_periph_find(path, name)) != NULL) {
 165
 166                 if ((periph->flags & CAM_PERIPH_INVALID) != 0
 167                  && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) {
 168                         periph->flags |= CAM_PERIPH_NEW_DEV_FOUND;
 169                         periph->deferred_callback = ac_callback;
 170                         periph->deferred_ac = code;
 171                         return (CAM_REQ_INPROG);
 172                 } else {
 173                         printf("cam_periph_alloc: attempt to re-allocate "
 174                                "valid device %s%d rejected\n",
 175                                periph->periph_name, periph->unit_number);
 176                 }
 177                 return (CAM_REQ_INVALID);
 178         }
 179
 180         periph = (struct cam_periph *)malloc(sizeof(*periph), M_CAMPERIPH,
 181                                              M_NOWAIT);
 182
 183         if (periph == NULL)
 184                 return (CAM_RESRC_UNAVAIL);
 185
 186         init_level++;
 187
 188
 189         sim = xpt_path_sim(path);
 190         path_id = xpt_path_path_id(path);
 191         target_id = xpt_path_target_id(path);
 192         lun_id = xpt_path_lun_id(path);
 193         bzero(periph, sizeof(*periph));
 194         cam_init_pinfo(&periph->pinfo);
 195         periph->periph_start = periph_start;
 196         periph->periph_dtor = periph_dtor;
 197         periph->periph_oninval = periph_oninvalidate;
 198         periph->type = type;
 199         periph->periph_name = name;
 200         periph->immediate_priority = CAM_PRIORITY_NONE;
 201         periph->refcount = 0;
 202         periph->sim = sim;
 203         SLIST_INIT(&periph->ccb_list);
 204         status = xpt_create_path(&path, periph, path_id, target_id, lun_id);
 205         if (status != CAM_REQ_CMP)
 206                 goto failure;
 207         periph->path = path;
 208
 209         xpt_lock_buses();
 210         for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
 211                 if (strcmp((*p_drv)->driver_name, name) == 0)
 212                         break;
 213         }
 214         if (*p_drv == NULL) {
 215                 printf("cam_periph_alloc: invalid periph name '%s'\n", name);
 216                 xpt_free_path(periph->path);
 217                 free(periph, M_CAMPERIPH);
 218                 xpt_unlock_buses();
 219                 return (CAM_REQ_INVALID);
 220         }
 221         periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id);
 222         cur_periph = TAILQ_FIRST(&(*p_drv)->units);
 223         while (cur_periph != NULL
 224             && cur_periph->unit_number < periph->unit_number)
 225                 cur_periph = TAILQ_NEXT(cur_periph, unit_links);
 226         if (cur_periph != NULL) {
 227                 KASSERT(cur_periph->unit_number != periph->unit_number, ("duplicate units on periph list"));
 228                 TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links);
 229         } else {
 230                 TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links);
 231                 (*p_drv)->generation++;
 232         }
 233         xpt_unlock_buses();
 234
 235         init_level++;
 236
 237         status = xpt_add_periph(periph);
 238         if (status != CAM_REQ_CMP)
 239                 goto failure;
 240
 241         init_level++;
 242
 243         status = periph_ctor(periph, arg);
 244
 245         if (status == CAM_REQ_CMP)
 246                 init_level++;
 247
 248 failure:
 249         switch (init_level) {
 250         case 4:
 251                 /* Initialized successfully */
 252                 break;
 253         case 3:
 254                 xpt_remove_periph(periph);
 255                 /* FALLTHROUGH */
 256         case 2:
 257                 xpt_lock_buses();
 258                 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
 259                 xpt_unlock_buses();
 260                 xpt_free_path(periph->path);
 261                 /* FALLTHROUGH */
 262         case 1:
 263                 free(periph, M_CAMPERIPH);
 264                 /* FALLTHROUGH */
 265         case 0:
 266                 /* No cleanup to perform. */
 267                 break;
 268         default:
 269                 panic("cam_periph_alloc: Unkown init level");
 270         }
 271         return(status);
 272 }
 273
 274 /*
 275  * Find a peripheral structure with the specified path, target, lun,
 276  * and (optionally) type.  If the name is NULL, this function will return
 277  * the first peripheral driver that matches the specified path.
 278  */
 279 struct cam_periph *
 280 cam_periph_find(struct cam_path *path, char *name)
 281 {
 282         struct periph_driver **p_drv;
 283         struct cam_periph *periph;
 284
 285         xpt_lock_buses();
 286         for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
 287
 288                 if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0))
 289                         continue;
 290
 291                 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
 292                         if (xpt_path_comp(periph->path, path) == 0) {
 293                                 xpt_unlock_buses();
 294                                 mtx_assert(periph->sim->mtx, MA_OWNED);
 295                                 return(periph);
 296                         }
 297                 }
 298                 if (name != NULL) {
 299                         xpt_unlock_buses();
 300                         return(NULL);
 301                 }
 302         }
 303         xpt_unlock_buses();
 304         return(NULL);
 305 }
 306
 307 /*
 308  * Find a peripheral structure with the specified path, target, lun,
 309  * and (optionally) type.  If the name is NULL, this function will return
 310  * the first peripheral driver that matches the specified path.
 311  */
 312 int
 313 cam_periph_list(struct cam_path *path, struct sbuf *sb)
 314 {
 315         struct periph_driver **p_drv;
 316         struct cam_periph *periph;
 317         int count;
 318
 319         count = 0;
 320         xpt_lock_buses();
 321         for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
 322
 323                 TAILQ_FOREACH(periph, &(*p_drv)->units, unit_links) {
 324                         if (xpt_path_comp(periph->path, path) != 0)
 325                                 continue;
 326
 327                         if (sbuf_len(sb) != 0)
 328                                 sbuf_cat(sb, ",");
 329
 330                         sbuf_printf(sb, "%s%d", periph->periph_name,
 331                                     periph->unit_number);
 332                         count++;
 333                 }
 334         }
 335         xpt_unlock_buses();
 336         return (count);
 337 }
 338
 339 cam_status
 340 cam_periph_acquire(struct cam_periph *periph)
 341 {
 342
 343         if (periph == NULL)
 344                 return(CAM_REQ_CMP_ERR);
 345
 346         xpt_lock_buses();
 347         periph->refcount++;
 348         xpt_unlock_buses();
 349
 350         return(CAM_REQ_CMP);
 351 }
 352
 353 void
 354 cam_periph_release_locked(struct cam_periph *periph)
 355 {
 356
 357         if (periph == NULL)
 358                 return;
 359
 360         xpt_lock_buses();
 361         if (periph->refcount != 0) {
 362                 periph->refcount--;
 363         } else {
 364                 xpt_print(periph->path, "%s: release %p when refcount is zero\n ", __func__, periph);
 365         }
 366         if (periph->refcount == 0
 367             && (periph->flags & CAM_PERIPH_INVALID)) {
 368                 camperiphfree(periph);
 369         }
 370         xpt_unlock_buses();
 371 }
 372
 373 void
 374 cam_periph_release(struct cam_periph *periph)
 375 {
 376         struct cam_sim *sim;
 377
 378         if (periph == NULL)
 379                 return;
 380
 381         sim = periph->sim;
 382         mtx_assert(sim->mtx, MA_NOTOWNED);
 383         mtx_lock(sim->mtx);
 384         cam_periph_release_locked(periph);
 385         mtx_unlock(sim->mtx);
 386 }
 387
 388 int
 389 cam_periph_hold(struct cam_periph *periph, int priority)
 390 {
 391         int error;
 392
 393         /*
 394          * Increment the reference count on the peripheral
 395          * while we wait for our lock attempt to succeed
 396          * to ensure the peripheral doesn't disappear out
 397          * from user us while we sleep.
 398          */
 399
 400         if (cam_periph_acquire(periph) != CAM_REQ_CMP)
 401                 return (ENXIO);
 402
 403         mtx_assert(periph->sim->mtx, MA_OWNED);
 404         while ((periph->flags & CAM_PERIPH_LOCKED) != 0) {
 405                 periph->flags |= CAM_PERIPH_LOCK_WANTED;
 406                 if ((error = mtx_sleep(periph, periph->sim->mtx, priority,
 407                     "caplck", 0)) != 0) {
 408                         cam_periph_release_locked(periph);
 409                         return (error);
 410                 }
 411         }
 412
 413         periph->flags |= CAM_PERIPH_LOCKED;
 414         return (0);
 415 }
 416
 417 void
 418 cam_periph_unhold(struct cam_periph *periph)
 419 {
 420
 421         mtx_assert(periph->sim->mtx, MA_OWNED);
 422
 423         periph->flags &= ~CAM_PERIPH_LOCKED;
 424         if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) {
 425                 periph->flags &= ~CAM_PERIPH_LOCK_WANTED;
 426                 wakeup(periph);
 427         }
 428
 429         cam_periph_release_locked(periph);
 430 }
 431
 432 /*
 433  * Look for the next unit number that is not currently in use for this
 434  * peripheral type starting at "newunit".  Also exclude unit numbers that
 435  * are reserved by for future "hardwiring" unless we already know that this
 436  * is a potential wired device.  Only assume that the device is "wired" the
 437  * first time through the loop since after that we'll be looking at unit
 438  * numbers that did not match a wiring entry.
 439  */
 440 static u_int
 441 camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired,
 442                   path_id_t pathid, target_id_t target, lun_id_t lun)
 443 {
 444         struct  cam_periph *periph;
 445         char    *periph_name;
 446         int     i, val, dunit, r;
 447         const char *dname, *strval;
 448
 449         periph_name = p_drv->driver_name;
 450         for (;;newunit++) {
 451
 452                 for (periph = TAILQ_FIRST(&p_drv->units);
 453                      periph != NULL && periph->unit_number != newunit;
 454                      periph = TAILQ_NEXT(periph, unit_links))
 455                         ;
 456
 457                 if (periph != NULL && periph->unit_number == newunit) {
 458                         if (wired != 0) {
 459                                 xpt_print(periph->path, "Duplicate Wired "
 460                                     "Device entry!\n");
 461                                 xpt_print(periph->path, "Second device (%s "
 462                                     "device at scbus%d target %d lun %d) will "
 463                                     "not be wired\n", periph_name, pathid,
 464                                     target, lun);
 465                                 wired = 0;
 466                         }
 467                         continue;
 468                 }
 469                 if (wired)
 470                         break;
 471
 472                 /*
 473                  * Don't match entries like "da 4" as a wired down
 474                  * device, but do match entries like "da 4 target 5"
 475                  * or even "da 4 scbus 1".
 476                  */
 477                 i = 0;
 478                 dname = periph_name;
 479                 for (;;) {
 480                         r = resource_find_dev(&i, dname, &dunit, NULL, NULL);
 481                         if (r != 0)
 482                                 break;
 483                         /* if no "target" and no specific scbus, skip */
 484                         if (resource_int_value(dname, dunit, "target", &val) &&
 485                             (resource_string_value(dname, dunit, "at",&strval)||
 486                              strcmp(strval, "scbus") == 0))
 487                                 continue;
 488                         if (newunit == dunit)
 489                                 break;
 490                 }
 491                 if (r != 0)
 492                         break;
 493         }
 494         return (newunit);
 495 }
 496
 497 static u_int
 498 camperiphunit(struct periph_driver *p_drv, path_id_t pathid,
 499               target_id_t target, lun_id_t lun)
 500 {
 501         u_int   unit;
 502         int     wired, i, val, dunit;
 503         const char *dname, *strval;
 504         char    pathbuf[32], *periph_name;
 505
 506         periph_name = p_drv->driver_name;
 507         snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid);
 508         unit = 0;
 509         i = 0;
 510         dname = periph_name;
 511         for (wired = 0; resource_find_dev(&i, dname, &dunit, NULL, NULL) == 0;
 512              wired = 0) {
 513                 if (resource_string_value(dname, dunit, "at", &strval) == 0) {
 514                         if (strcmp(strval, pathbuf) != 0)
 515                                 continue;
 516                         wired++;
 517                 }
 518                 if (resource_int_value(dname, dunit, "target", &val) == 0) {
 519                         if (val != target)
 520                                 continue;
 521                         wired++;
 522                 }
 523                 if (resource_int_value(dname, dunit, "lun", &val) == 0) {
 524                         if (val != lun)
 525                                 continue;
 526                         wired++;
 527                 }
 528                 if (wired != 0) {
 529                         unit = dunit;
 530                         break;
 531                 }
 532         }
 533
 534         /*
 535          * Either start from 0 looking for the next unit or from
 536          * the unit number given in the resource config.  This way,
 537          * if we have wildcard matches, we don't return the same
 538          * unit number twice.
 539          */
 540         unit = camperiphnextunit(p_drv, unit, wired, pathid, target, lun);
 541
 542         return (unit);
 543 }
 544
 545 void
 546 cam_periph_invalidate(struct cam_periph *periph)
 547 {
 548
 549         /*
 550          * We only call this routine the first time a peripheral is
 551          * invalidated.
 552          */
 553         if (((periph->flags & CAM_PERIPH_INVALID) == 0)
 554          && (periph->periph_oninval != NULL))
 555                 periph->periph_oninval(periph);
 556
 557         periph->flags |= CAM_PERIPH_INVALID;
 558         periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND;
 559
 560         xpt_lock_buses();
 561         if (periph->refcount == 0)
 562                 camperiphfree(periph);
 563         xpt_unlock_buses();
 564 }
 565
 566 static void
 567 camperiphfree(struct cam_periph *periph)
 568 {
 569         struct periph_driver **p_drv;
 570
 571         for (p_drv = periph_drivers; *p_drv != NULL; p_drv++) {
 572                 if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0)
 573                         break;
 574         }
 575         if (*p_drv == NULL) {
 576                 printf("camperiphfree: attempt to free non-existant periph\n");
 577                 return;
 578         }
 579
 580         TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links);
 581         (*p_drv)->generation++;
 582         xpt_unlock_buses();
 583
 584         if (periph->periph_dtor != NULL)
 585                 periph->periph_dtor(periph);
 586         xpt_remove_periph(periph);
 587
 588         if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) {
 589                 union ccb ccb;
 590                 void *arg;
 591
 592                 switch (periph->deferred_ac) {
 593                 case AC_FOUND_DEVICE:
 594                         ccb.ccb_h.func_code = XPT_GDEV_TYPE;
 595                         xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
 596                         xpt_action(&ccb);
 597                         arg = &ccb;
 598                         break;
 599                 case AC_PATH_REGISTERED:
 600                         ccb.ccb_h.func_code = XPT_PATH_INQ;
 601                         xpt_setup_ccb(&ccb.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
 602                         xpt_action(&ccb);
 603                         arg = &ccb;
 604                         break;
 605                 default:
 606                         arg = NULL;
 607                         break;
 608                 }
 609                 periph->deferred_callback(NULL, periph->deferred_ac,
 610                                           periph->path, arg);
 611         }
 612         xpt_free_path(periph->path);
 613         free(periph, M_CAMPERIPH);
 614         xpt_lock_buses();
 615 }
 616
 617 /*
 618  * Map user virtual pointers into kernel virtual address space, so we can
 619  * access the memory.  This won't work on physical pointers, for now it's
 620  * up to the caller to check for that.  (XXX KDM -- should we do that here
 621  * instead?)  This also only works for up to MAXPHYS memory.  Since we use
 622  * buffers to map stuff in and out, we're limited to the buffer size.
 623  */
 624 int
 625 cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
 626 {
 627         int numbufs, i, j;
 628         int flags[CAM_PERIPH_MAXMAPS];
 629         u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
 630         u_int32_t lengths[CAM_PERIPH_MAXMAPS];
 631         u_int32_t dirs[CAM_PERIPH_MAXMAPS];
 632         /* Some controllers may not be able to handle more data. */
 633         size_t maxmap = DFLTPHYS;
 634
 635         switch(ccb->ccb_h.func_code) {
 636         case XPT_DEV_MATCH:
 637                 if (ccb->cdm.match_buf_len == 0) {
 638                         printf("cam_periph_mapmem: invalid match buffer "
 639                                "length 0\n");
 640                         return(EINVAL);
 641                 }
 642                 if (ccb->cdm.pattern_buf_len > 0) {
 643                         data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
 644                         lengths[0] = ccb->cdm.pattern_buf_len;
 645                         dirs[0] = CAM_DIR_OUT;
 646                         data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
 647                         lengths[1] = ccb->cdm.match_buf_len;
 648                         dirs[1] = CAM_DIR_IN;
 649                         numbufs = 2;
 650                 } else {
 651                         data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
 652                         lengths[0] = ccb->cdm.match_buf_len;
 653                         dirs[0] = CAM_DIR_IN;
 654                         numbufs = 1;
 655                 }
 656                 /*
 657                  * This request will not go to the hardware, no reason
 658                  * to be so strict. vmapbuf() is able to map up to MAXPHYS.
 659                  */
 660                 maxmap = MAXPHYS;
 661                 break;
 662         case XPT_SCSI_IO:
 663         case XPT_CONT_TARGET_IO:
 664                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
 665                         return(0);
 666
 667                 data_ptrs[0] = &ccb->csio.data_ptr;
 668                 lengths[0] = ccb->csio.dxfer_len;
 669                 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
 670                 numbufs = 1;
 671                 break;
 672         case XPT_ATA_IO:
 673                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE)
 674                         return(0);
 675
 676                 data_ptrs[0] = &ccb->ataio.data_ptr;
 677                 lengths[0] = ccb->ataio.dxfer_len;
 678                 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK;
 679                 numbufs = 1;
 680                 break;
 681         case XPT_SMP_IO:
 682                 data_ptrs[0] = &ccb->smpio.smp_request;
 683                 lengths[0] = ccb->smpio.smp_request_len;
 684                 dirs[0] = CAM_DIR_OUT;
 685                 data_ptrs[1] = &ccb->smpio.smp_response;
 686                 lengths[1] = ccb->smpio.smp_response_len;
 687                 dirs[1] = CAM_DIR_IN;
 688                 numbufs = 2;
 689                 break;
 690         case XPT_DEV_ADVINFO:
 691                 if (ccb->cdai.bufsiz == 0)
 692                         return (0);
 693
 694                 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
 695                 lengths[0] = ccb->cdai.bufsiz;
 696                 dirs[0] = CAM_DIR_IN;
 697                 numbufs = 1;
 698
 699                 /*
 700                  * This request will not go to the hardware, no reason
 701                  * to be so strict. vmapbuf() is able to map up to MAXPHYS.
 702                  */
 703                 maxmap = MAXPHYS;
 704                 break;
 705         default:
 706                 return(EINVAL);
 707                 break; /* NOTREACHED */
 708         }
 709
 710         /*
 711          * Check the transfer length and permissions first, so we don't
 712          * have to unmap any previously mapped buffers.
 713          */
 714         for (i = 0; i < numbufs; i++) {
 715
 716                 flags[i] = 0;
 717
 718                 /*
 719                  * The userland data pointer passed in may not be page
 720                  * aligned.  vmapbuf() truncates the address to a page
 721                  * boundary, so if the address isn't page aligned, we'll
 722                  * need enough space for the given transfer length, plus
 723                  * whatever extra space is necessary to make it to the page
 724                  * boundary.
 725                  */
 726                 if ((lengths[i] +
 727                     (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > maxmap){
 728                         printf("cam_periph_mapmem: attempt to map %lu bytes, "
 729                                "which is greater than %lu\n",
 730                                (long)(lengths[i] +
 731                                (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)),
 732                                (u_long)maxmap);
 733                         return(E2BIG);
 734                 }
 735
 736                 if (dirs[i] & CAM_DIR_OUT) {
 737                         flags[i] = BIO_WRITE;
 738                 }
 739
 740                 if (dirs[i] & CAM_DIR_IN) {
 741                         flags[i] = BIO_READ;
 742                 }
 743
 744         }
 745
 746         /* this keeps the current process from getting swapped */
 747         /*
 748          * XXX KDM should I use P_NOSWAP instead?
 749          */
 750         PHOLD(curproc);
 751
 752         for (i = 0; i < numbufs; i++) {
 753                 /*
 754                  * Get the buffer.
 755                  */
 756                 mapinfo->bp[i] = getpbuf(NULL);
 757
 758                 /* save the buffer's data address */
 759                 mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data;
 760
 761                 /* put our pointer in the data slot */
 762                 mapinfo->bp[i]->b_data = *data_ptrs[i];
 763
 764                 /* set the transfer length, we know it's < MAXPHYS */
 765                 mapinfo->bp[i]->b_bufsize = lengths[i];
 766
 767                 /* set the direction */
 768                 mapinfo->bp[i]->b_iocmd = flags[i];
 769
 770                 /*
 771                  * Map the buffer into kernel memory.
 772                  *
 773                  * Note that useracc() alone is not a  sufficient test.
 774                  * vmapbuf() can still fail due to a smaller file mapped
 775                  * into a larger area of VM, or if userland races against
 776                  * vmapbuf() after the useracc() check.
 777                  */
 778                 if (vmapbuf(mapinfo->bp[i]) < 0) {
 779                         for (j = 0; j < i; ++j) {
 780                                 *data_ptrs[j] = mapinfo->bp[j]->b_saveaddr;
 781                                 vunmapbuf(mapinfo->bp[j]);
 782                                 relpbuf(mapinfo->bp[j], NULL);
 783                         }
 784                         relpbuf(mapinfo->bp[i], NULL);
 785                         PRELE(curproc);
 786                         return(EACCES);
 787                 }
 788
 789                 /* set our pointer to the new mapped area */
 790                 *data_ptrs[i] = mapinfo->bp[i]->b_data;
 791
 792                 mapinfo->num_bufs_used++;
 793         }
 794
 795         /*
 796          * Now that we've gotten this far, change ownership to the kernel
 797          * of the buffers so that we don't run afoul of returning to user
 798          * space with locks (on the buffer) held.
 799          */
 800         for (i = 0; i < numbufs; i++) {
 801                 BUF_KERNPROC(mapinfo->bp[i]);
 802         }
 803
 804
 805         return(0);
 806 }
 807
 808 /*
 809  * Unmap memory segments mapped into kernel virtual address space by
 810  * cam_periph_mapmem().
 811  */
 812 void
 813 cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo)
 814 {
 815         int numbufs, i;
 816         u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS];
 817
 818         if (mapinfo->num_bufs_used <= 0) {
 819                 /* allow ourselves to be swapped once again */
 820                 PRELE(curproc);
 821                 return;
 822         }
 823
 824         switch (ccb->ccb_h.func_code) {
 825         case XPT_DEV_MATCH:
 826                 numbufs = min(mapinfo->num_bufs_used, 2);
 827
 828                 if (numbufs == 1) {
 829                         data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches;
 830                 } else {
 831                         data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns;
 832                         data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches;
 833                 }
 834                 break;
 835         case XPT_SCSI_IO:
 836         case XPT_CONT_TARGET_IO:
 837                 data_ptrs[0] = &ccb->csio.data_ptr;
 838                 numbufs = min(mapinfo->num_bufs_used, 1);
 839                 break;
 840         case XPT_ATA_IO:
 841                 data_ptrs[0] = &ccb->ataio.data_ptr;
 842                 numbufs = min(mapinfo->num_bufs_used, 1);
 843                 break;
 844         case XPT_SMP_IO:
 845                 numbufs = min(mapinfo->num_bufs_used, 2);
 846                 data_ptrs[0] = &ccb->smpio.smp_request;
 847                 data_ptrs[1] = &ccb->smpio.smp_response;
 848                 break;
 849         case XPT_DEV_ADVINFO:
 850                 numbufs = min(mapinfo->num_bufs_used, 1);
 851                 data_ptrs[0] = (uint8_t **)&ccb->cdai.buf;
 852                 break;
 853         default:
 854                 /* allow ourselves to be swapped once again */
 855                 PRELE(curproc);
 856                 return;
 857                 break; /* NOTREACHED */
 858         }
 859
 860         for (i = 0; i < numbufs; i++) {
 861                 /* Set the user's pointer back to the original value */
 862                 *data_ptrs[i] = mapinfo->bp[i]->b_saveaddr;
 863
 864                 /* unmap the buffer */
 865                 vunmapbuf(mapinfo->bp[i]);
 866
 867                 /* release the buffer */
 868                 relpbuf(mapinfo->bp[i], NULL);
 869         }
 870
 871         /* allow ourselves to be swapped once again */
 872         PRELE(curproc);
 873 }
 874
 875 union ccb *
 876 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority)
 877 {
 878         struct ccb_hdr *ccb_h;
 879
 880         mtx_assert(periph->sim->mtx, MA_OWNED);
 881         CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering cdgetccb\n"));
 882
 883         while (SLIST_FIRST(&periph->ccb_list) == NULL) {
 884                 if (periph->immediate_priority > priority)
 885                         periph->immediate_priority = priority;
 886                 xpt_schedule(periph, priority);
 887                 if ((SLIST_FIRST(&periph->ccb_list) != NULL)
 888                  && (SLIST_FIRST(&periph->ccb_list)->pinfo.priority == priority))
 889                         break;
 890                 mtx_assert(periph->sim->mtx, MA_OWNED);
 891                 mtx_sleep(&periph->ccb_list, periph->sim->mtx, PRIBIO, "cgticb",
 892                     0);
 893         }
 894
 895         ccb_h = SLIST_FIRST(&periph->ccb_list);
 896         SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle);
 897         return ((union ccb *)ccb_h);
 898 }
 899
 900 void
 901 cam_periph_ccbwait(union ccb *ccb)
 902 {
 903         struct cam_sim *sim;
 904
 905         sim = xpt_path_sim(ccb->ccb_h.path);
 906         if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX)
 907          || ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG))
 908                 mtx_sleep(&ccb->ccb_h.cbfcnp, sim->mtx, PRIBIO, "cbwait", 0);
 909 }
 910
 911 int
 912 cam_periph_ioctl(struct cam_periph *periph, u_long cmd, caddr_t addr,
 913                  int (*error_routine)(union ccb *ccb,
 914                                       cam_flags camflags,
 915                                       u_int32_t sense_flags))
 916 {
 917         union ccb            *ccb;
 918         int                  error;
 919         int                  found;
 920
 921         error = found = 0;
 922
 923         switch(cmd){
 924         case CAMGETPASSTHRU:
 925                 ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
 926                 xpt_setup_ccb(&ccb->ccb_h,
 927                               ccb->ccb_h.path,
 928                               CAM_PRIORITY_NORMAL);
 929                 ccb->ccb_h.func_code = XPT_GDEVLIST;
 930
 931                 /*
 932                  * Basically, the point of this is that we go through
 933                  * getting the list of devices, until we find a passthrough
 934                  * device.  In the current version of the CAM code, the
 935                  * only way to determine what type of device we're dealing
 936                  * with is by its name.
 937                  */
 938                 while (found == 0) {
 939                         ccb->cgdl.index = 0;
 940                         ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS;
 941                         while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) {
 942
 943                                 /* we want the next device in the list */
 944                                 xpt_action(ccb);
 945                                 if (strncmp(ccb->cgdl.periph_name,
 946                                     "pass", 4) == 0){
 947                                         found = 1;
 948                                         break;
 949                                 }
 950                         }
 951                         if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) &&
 952                             (found == 0)) {
 953                                 ccb->cgdl.periph_name[0] = '\0';
 954                                 ccb->cgdl.unit_number = 0;
 955                                 break;
 956                         }
 957                 }
 958
 959                 /* copy the result back out */
 960                 bcopy(ccb, addr, sizeof(union ccb));
 961
 962                 /* and release the ccb */
 963                 xpt_release_ccb(ccb);
 964
 965                 break;
 966         default:
 967                 error = ENOTTY;
 968                 break;
 969         }
 970         return(error);
 971 }
 972
 973 int
 974 cam_periph_runccb(union ccb *ccb,
 975                   int (*error_routine)(union ccb *ccb,
 976                                        cam_flags camflags,
 977                                        u_int32_t sense_flags),
 978                   cam_flags camflags, u_int32_t sense_flags,
 979                   struct devstat *ds)
 980 {
 981         struct cam_sim *sim;
 982         int error;
 983
 984         error = 0;
 985         sim = xpt_path_sim(ccb->ccb_h.path);
 986         mtx_assert(sim->mtx, MA_OWNED);
 987
 988         /*
 989          * If the user has supplied a stats structure, and if we understand
 990          * this particular type of ccb, record the transaction start.
 991          */
 992         if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO ||
 993             ccb->ccb_h.func_code == XPT_ATA_IO))
 994                 devstat_start_transaction(ds, NULL);
 995
 996         xpt_action(ccb);
 997
 998         do {
 999                 cam_periph_ccbwait(ccb);
1000                 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
1001                         error = 0;
1002                 else if (error_routine != NULL)
1003                         error = (*error_routine)(ccb, camflags, sense_flags);
1004                 else
1005                         error = 0;
1006
1007         } while (error == ERESTART);
1008
1009         if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) {
1010                 cam_release_devq(ccb->ccb_h.path,
1011                                  /* relsim_flags */0,
1012                                  /* openings */0,
1013                                  /* timeout */0,
1014                                  /* getcount_only */ FALSE);
1015                 ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1016         }
1017
1018         if (ds != NULL) {
1019                 if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
1020                         devstat_end_transaction(ds,
1021                                         ccb->csio.dxfer_len,
1022                                         ccb->csio.tag_action & 0x3,
1023                                         ((ccb->ccb_h.flags & CAM_DIR_MASK) ==
1024                                         CAM_DIR_NONE) ?  DEVSTAT_NO_DATA :
1025                                         (ccb->ccb_h.flags & CAM_DIR_OUT) ?
1026                                         DEVSTAT_WRITE :
1027                                         DEVSTAT_READ, NULL, NULL);
1028                 } else if (ccb->ccb_h.func_code == XPT_ATA_IO) {
1029                         devstat_end_transaction(ds,
1030                                         ccb->ataio.dxfer_len,
1031                                         ccb->ataio.tag_action & 0x3,
1032                                         ((ccb->ccb_h.flags & CAM_DIR_MASK) ==
1033                                         CAM_DIR_NONE) ?  DEVSTAT_NO_DATA :
1034                                         (ccb->ccb_h.flags & CAM_DIR_OUT) ?
1035                                         DEVSTAT_WRITE :
1036                                         DEVSTAT_READ, NULL, NULL);
1037                 }
1038         }
1039
1040         return(error);
1041 }
1042
1043 void
1044 cam_freeze_devq(struct cam_path *path)
1045 {
1046
1047         cam_freeze_devq_arg(path, 0, 0);
1048 }
1049
1050 void
1051 cam_freeze_devq_arg(struct cam_path *path, uint32_t flags, uint32_t arg)
1052 {
1053         struct ccb_relsim crs;
1054
1055         xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NONE);
1056         crs.ccb_h.func_code = XPT_FREEZE_QUEUE;
1057         crs.release_flags = flags;
1058         crs.openings = arg;
1059         crs.release_timeout = arg;
1060         xpt_action((union ccb *)&crs);
1061 }
1062
1063 u_int32_t
1064 cam_release_devq(struct cam_path *path, u_int32_t relsim_flags,
1065                  u_int32_t openings, u_int32_t arg,
1066                  int getcount_only)
1067 {
1068         struct ccb_relsim crs;
1069
1070         xpt_setup_ccb(&crs.ccb_h, path, CAM_PRIORITY_NORMAL);
1071         crs.ccb_h.func_code = XPT_REL_SIMQ;
1072         crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0;
1073         crs.release_flags = relsim_flags;
1074         crs.openings = openings;
1075         crs.release_timeout = arg;
1076         xpt_action((union ccb *)&crs);
1077         return (crs.qfrozen_cnt);
1078 }
1079
1080 #define saved_ccb_ptr ppriv_ptr0
1081 #define recovery_depth ppriv_field1
1082 static void
1083 camperiphsensedone(struct cam_periph *periph, union ccb *done_ccb)
1084 {
1085         union ccb      *saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr;
1086         cam_status      status;
1087         int             frozen = 0;
1088         int             depth = done_ccb->ccb_h.recovery_depth;
1089
1090         status = done_ccb->ccb_h.status;
1091         if (status & CAM_DEV_QFRZN) {
1092                 frozen = 1;
1093                 /*
1094                  * Clear freeze flag now for case of retry,
1095                  * freeze will be dropped later.
1096                  */
1097                 done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1098         }
1099         status &= CAM_STATUS_MASK;
1100         switch (status) {
1101         case CAM_REQ_CMP:
1102         {
1103                 int error_code, sense_key, asc, ascq;
1104
1105                 scsi_extract_sense_len(&saved_ccb->csio.sense_data,
1106                                        saved_ccb->csio.sense_len -
1107                                        saved_ccb->csio.sense_resid,
1108                                        &error_code, &sense_key, &asc, &ascq,
1109                                        /*show_errors*/ 1);
1110                 /*
1111                  * If we manually retrieved sense into a CCB and got
1112                  * something other than "NO SENSE" send the updated CCB
1113                  * back to the client via xpt_done() to be processed via
1114                  * the error recovery code again.
1115                  */
1116                 if ((sense_key != -1)
1117                  && (sense_key != SSD_KEY_NO_SENSE)) {
1118                         saved_ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
1119                 } else {
1120                         saved_ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1121                         saved_ccb->ccb_h.status |= CAM_AUTOSENSE_FAIL;
1122                 }
1123                 saved_ccb->csio.sense_resid = done_ccb->csio.resid;
1124                 bcopy(saved_ccb, done_ccb, sizeof(union ccb));
1125                 xpt_free_ccb(saved_ccb);
1126                 break;
1127         }
1128         default:
1129                 bcopy(saved_ccb, done_ccb, sizeof(union ccb));
1130                 xpt_free_ccb(saved_ccb);
1131                 done_ccb->ccb_h.status &= ~CAM_STATUS_MASK;
1132                 done_ccb->ccb_h.status |= CAM_AUTOSENSE_FAIL;
1133                 break;
1134         }
1135         periph->flags &= ~CAM_PERIPH_SENSE_INPROG;
1136         /*
1137          * If it is the end of recovery, drop freeze, taken due to
1138          * CAM_DEV_QFREEZE flag, set on recovery request.
1139          */
1140         if (depth == 0) {
1141                 cam_release_devq(done_ccb->ccb_h.path,
1142                          /*relsim_flags*/0,
1143                          /*openings*/0,
1144                          /*timeout*/0,
1145                          /*getcount_only*/0);
1146         }
1147         /*
1148          * Copy frozen flag from recovery request if it is set there
1149          * for some reason.
1150          */
1151         if (frozen != 0)
1152                 done_ccb->ccb_h.status |= CAM_DEV_QFRZN;
1153         (*done_ccb->ccb_h.cbfcnp)(periph, done_ccb);
1154 }
1155
1156 static void
1157 camperiphdone(struct cam_periph *periph, union ccb *done_ccb)
1158 {
1159         union ccb      *saved_ccb, *save_ccb;
1160         cam_status      status;
1161         int             frozen = 0;
1162         struct scsi_start_stop_unit *scsi_cmd;
1163         u_int32_t       relsim_flags, timeout;
1164
1165         status = done_ccb->ccb_h.status;
1166         if (status & CAM_DEV_QFRZN) {
1167                 frozen = 1;
1168                 /*
1169                  * Clear freeze flag now for case of retry,
1170                  * freeze will be dropped later.
1171                  */
1172                 done_ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1173         }
1174
1175         timeout = 0;
1176         relsim_flags = 0;
1177         saved_ccb = (union ccb *)done_ccb->ccb_h.saved_ccb_ptr;
1178
1179         switch (status & CAM_STATUS_MASK) {
1180         case CAM_REQ_CMP:
1181         {
1182                 /*
1183                  * If we have successfully taken a device from the not
1184                  * ready to ready state, re-scan the device and re-get
1185                  * the inquiry information.  Many devices (mostly disks)
1186                  * don't properly report their inquiry information unless
1187                  * they are spun up.
1188                  */
1189                 scsi_cmd = (struct scsi_start_stop_unit *)
1190                                 &done_ccb->csio.cdb_io.cdb_bytes;
1191
1192                 if (scsi_cmd->opcode == START_STOP_UNIT)
1193                         xpt_async(AC_INQ_CHANGED,
1194                                   done_ccb->ccb_h.path, NULL);
1195                 goto final;
1196         }
1197         case CAM_SCSI_STATUS_ERROR:
1198                 scsi_cmd = (struct scsi_start_stop_unit *)
1199                                 &done_ccb->csio.cdb_io.cdb_bytes;
1200                 if (status & CAM_AUTOSNS_VALID) {
1201                         struct ccb_getdev cgd;
1202                         struct scsi_sense_data *sense;
1203                         int    error_code, sense_key, asc, ascq, sense_len;
1204                         scsi_sense_action err_action;
1205
1206                         sense = &done_ccb->csio.sense_data;
1207                         sense_len = done_ccb->csio.sense_len -
1208                                     done_ccb->csio.sense_resid;
1209                         scsi_extract_sense_len(sense, sense_len, &error_code,
1210                                                &sense_key, &asc, &ascq,
1211                                                /*show_errors*/ 1);
1212                         /*
1213                          * Grab the inquiry data for this device.
1214                          */
1215                         xpt_setup_ccb(&cgd.ccb_h, done_ccb->ccb_h.path,
1216                             CAM_PRIORITY_NORMAL);
1217                         cgd.ccb_h.func_code = XPT_GDEV_TYPE;
1218                         xpt_action((union ccb *)&cgd);
1219                         err_action = scsi_error_action(&done_ccb->csio,
1220                                                        &cgd.inq_data, 0);
1221                         /*
1222                          * If the error is "invalid field in CDB",
1223                          * and the load/eject flag is set, turn the
1224                          * flag off and try again.  This is just in
1225                          * case the drive in question barfs on the
1226                          * load eject flag.  The CAM code should set
1227                          * the load/eject flag by default for
1228                          * removable media.
1229                          */
1230                         /* XXX KDM
1231                          * Should we check to see what the specific
1232                          * scsi status is??  Or does it not matter
1233                          * since we already know that there was an
1234                          * error, and we know what the specific
1235                          * error code was, and we know what the
1236                          * opcode is..
1237                          */
1238                         if ((scsi_cmd->opcode == START_STOP_UNIT) &&
1239                             ((scsi_cmd->how & SSS_LOEJ) != 0) &&
1240                              (asc == 0x24) && (ascq == 0x00) &&
1241                              (done_ccb->ccb_h.retry_count > 0)) {
1242
1243                                 scsi_cmd->how &= ~SSS_LOEJ;
1244                                 xpt_action(done_ccb);
1245                         } else if ((done_ccb->ccb_h.retry_count > 1)
1246                                 && ((err_action & SS_MASK) != SS_FAIL)) {
1247
1248                                 /*
1249                                  * In this case, the error recovery
1250                                  * command failed, but we've got
1251                                  * some retries left on it.  Give
1252                                  * it another try unless this is an
1253                                  * unretryable error.
1254                                  */
1255                                 /* set the timeout to .5 sec */
1256                                 relsim_flags =
1257                                         RELSIM_RELEASE_AFTER_TIMEOUT;
1258                                 timeout = 500;
1259                                 xpt_action(done_ccb);
1260                                 break;
1261                         } else {
1262                                 /*
1263                                  * Perform the final retry with the original
1264                                  * CCB so that final error processing is
1265                                  * performed by the owner of the CCB.
1266                                  */
1267                                 goto final;
1268                         }
1269                 } else {
1270                         save_ccb = xpt_alloc_ccb_nowait();
1271                         if (save_ccb == NULL)
1272                                 goto final;
1273                         bcopy(done_ccb, save_ccb, sizeof(*save_ccb));
1274                         periph->flags |= CAM_PERIPH_SENSE_INPROG;
1275                         /*
1276                          * Send a Request Sense to the device.  We
1277                          * assume that we are in a contingent allegiance
1278                          * condition so we do not tag this request.
1279                          */
1280                         scsi_request_sense(&done_ccb->csio, /*retries*/1,
1281                                            camperiphsensedone,
1282                                            &save_ccb->csio.sense_data,
1283                                            save_ccb->csio.sense_len,
1284                                            CAM_TAG_ACTION_NONE,
1285                                            /*sense_len*/SSD_FULL_SIZE,
1286                                            /*timeout*/5000);
1287                         done_ccb->ccb_h.pinfo.priority--;
1288                         done_ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
1289                         done_ccb->ccb_h.saved_ccb_ptr = save_ccb;
1290                         done_ccb->ccb_h.recovery_depth++;
1291                         xpt_action(done_ccb);
1292                 }
1293                 break;
1294         default:
1295 final:
1296                 bcopy(saved_ccb, done_ccb, sizeof(*done_ccb));
1297                 xpt_free_ccb(saved_ccb);
1298                 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG;
1299                 xpt_action(done_ccb);
1300                 break;
1301         }
1302
1303         /* decrement the retry count */
1304         /*
1305          * XXX This isn't appropriate in all cases.  Restructure,
1306          *     so that the retry count is only decremented on an
1307          *     actual retry.  Remeber that the orignal ccb had its
1308          *     retry count dropped before entering recovery, so
1309          *     doing it again is a bug.
1310          */
1311         if (done_ccb->ccb_h.retry_count > 0)
1312                 done_ccb->ccb_h.retry_count--;
1313         /*
1314          * Drop freeze taken due to CAM_DEV_QFREEZE flag set on recovery
1315          * request.
1316          */
1317         cam_release_devq(done_ccb->ccb_h.path,
1318                          /*relsim_flags*/relsim_flags,
1319                          /*openings*/0,
1320                          /*timeout*/timeout,
1321                          /*getcount_only*/0);
1322         /* Drop freeze taken, if this recovery request got error. */
1323         if (frozen != 0) {
1324                 cam_release_devq(done_ccb->ccb_h.path,
1325                          /*relsim_flags*/0,
1326                          /*openings*/0,
1327                          /*timeout*/0,
1328                          /*getcount_only*/0);
1329         }
1330 }
1331
1332 /*
1333  * Generic Async Event handler.  Peripheral drivers usually
1334  * filter out the events that require personal attention,
1335  * and leave the rest to this function.
1336  */
1337 void
1338 cam_periph_async(struct cam_periph *periph, u_int32_t code,
1339                  struct cam_path *path, void *arg)
1340 {
1341         switch (code) {
1342         case AC_LOST_DEVICE:
1343                 cam_periph_invalidate(periph);
1344                 break;
1345         default:
1346                 break;
1347         }
1348 }
1349
1350 void
1351 cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle)
1352 {
1353         struct ccb_getdevstats cgds;
1354
1355         xpt_setup_ccb(&cgds.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
1356         cgds.ccb_h.func_code = XPT_GDEV_STATS;
1357         xpt_action((union ccb *)&cgds);
1358         cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle);
1359 }
1360
1361 void
1362 cam_periph_freeze_after_event(struct cam_periph *periph,
1363                               struct timeval* event_time, u_int duration_ms)
1364 {
1365         struct timeval delta;
1366         struct timeval duration_tv;
1367
1368         microtime(&delta);
1369         timevalsub(&delta, event_time);
1370         duration_tv.tv_sec = duration_ms / 1000;
1371         duration_tv.tv_usec = (duration_ms % 1000) * 1000;
1372         if (timevalcmp(&delta, &duration_tv, <)) {
1373                 timevalsub(&duration_tv, &delta);
1374
1375                 duration_ms = duration_tv.tv_sec * 1000;
1376                 duration_ms += duration_tv.tv_usec / 1000;
1377                 cam_freeze_devq(periph->path);
1378                 cam_release_devq(periph->path,
1379                                 RELSIM_RELEASE_AFTER_TIMEOUT,
1380                                 /*reduction*/0,
1381                                 /*timeout*/duration_ms,
1382                                 /*getcount_only*/0);
1383         }
1384
1385 }
1386
1387 static int
1388 camperiphscsistatuserror(union ccb *ccb, cam_flags camflags,
1389                          u_int32_t sense_flags,
1390                          int *openings, u_int32_t *relsim_flags,
1391                          u_int32_t *timeout, const char **action_string)
1392 {
1393         int error;
1394
1395         switch (ccb->csio.scsi_status) {
1396         case SCSI_STATUS_OK:
1397         case SCSI_STATUS_COND_MET:
1398         case SCSI_STATUS_INTERMED:
1399         case SCSI_STATUS_INTERMED_COND_MET:
1400                 error = 0;
1401                 break;
1402         case SCSI_STATUS_CMD_TERMINATED:
1403         case SCSI_STATUS_CHECK_COND:
1404                 if (bootverbose)
1405                         xpt_print(ccb->ccb_h.path, "SCSI status error\n");
1406                 error = camperiphscsisenseerror(ccb,
1407                                                 camflags,
1408                                                 sense_flags,
1409                                                 openings,
1410                                                 relsim_flags,
1411                                                 timeout,
1412                                                 action_string);
1413                 break;
1414         case SCSI_STATUS_QUEUE_FULL:
1415         {
1416                 /* no decrement */
1417                 struct ccb_getdevstats cgds;
1418
1419                 /*
1420                  * First off, find out what the current
1421                  * transaction counts are.
1422                  */
1423                 xpt_setup_ccb(&cgds.ccb_h,
1424                               ccb->ccb_h.path,
1425                               CAM_PRIORITY_NORMAL);
1426                 cgds.ccb_h.func_code = XPT_GDEV_STATS;
1427                 xpt_action((union ccb *)&cgds);
1428
1429                 /*
1430                  * If we were the only transaction active, treat
1431                  * the QUEUE FULL as if it were a BUSY condition.
1432                  */
1433                 if (cgds.dev_active != 0) {
1434                         int total_openings;
1435
1436                         /*
1437                          * Reduce the number of openings to
1438                          * be 1 less than the amount it took
1439                          * to get a queue full bounded by the
1440                          * minimum allowed tag count for this
1441                          * device.
1442                          */
1443                         total_openings = cgds.dev_active + cgds.dev_openings;
1444                         *openings = cgds.dev_active;
1445                         if (*openings < cgds.mintags)
1446                                 *openings = cgds.mintags;
1447                         if (*openings < total_openings)
1448                                 *relsim_flags = RELSIM_ADJUST_OPENINGS;
1449                         else {
1450                                 /*
1451                                  * Some devices report queue full for
1452                                  * temporary resource shortages.  For
1453                                  * this reason, we allow a minimum
1454                                  * tag count to be entered via a
1455                                  * quirk entry to prevent the queue
1456                                  * count on these devices from falling
1457                                  * to a pessimisticly low value.  We
1458                                  * still wait for the next successful
1459                                  * completion, however, before queueing
1460                                  * more transactions to the device.
1461                                  */
1462                                 *relsim_flags = RELSIM_RELEASE_AFTER_CMDCMPLT;
1463                         }
1464                         *timeout = 0;
1465                         error = ERESTART;
1466                         if (bootverbose) {
1467                                 xpt_print(ccb->ccb_h.path, "Queue full\n");
1468                         }
1469                         break;
1470                 }
1471                 /* FALLTHROUGH */
1472         }
1473         case SCSI_STATUS_BUSY:
1474                 /*
1475                  * Restart the queue after either another
1476                  * command completes or a 1 second timeout.
1477                  */
1478                 if (bootverbose) {
1479                         xpt_print(ccb->ccb_h.path, "Device busy\n");
1480                 }
1481                 if (ccb->ccb_h.retry_count > 0) {
1482                         ccb->ccb_h.retry_count--;
1483                         error = ERESTART;
1484                         *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT
1485                                       | RELSIM_RELEASE_AFTER_CMDCMPLT;
1486                         *timeout = 1000;
1487                 } else {
1488                         error = EIO;
1489                 }
1490                 break;
1491         case SCSI_STATUS_RESERV_CONFLICT:
1492                 xpt_print(ccb->ccb_h.path, "Reservation conflict\n");
1493                 error = EIO;
1494                 break;
1495         default:
1496                 xpt_print(ccb->ccb_h.path, "SCSI status 0x%x\n",
1497                     ccb->csio.scsi_status);
1498                 error = EIO;
1499                 break;
1500         }
1501         return (error);
1502 }
1503
1504 static int
1505 camperiphscsisenseerror(union ccb *ccb, cam_flags camflags,
1506                         u_int32_t sense_flags,
1507                        int *openings, u_int32_t *relsim_flags,
1508                        u_int32_t *timeout, const char **action_string)
1509 {
1510         struct cam_periph *periph;
1511         union ccb *orig_ccb = ccb;
1512         int error;
1513
1514         periph = xpt_path_periph(ccb->ccb_h.path);
1515         if (periph->flags &
1516             (CAM_PERIPH_RECOVERY_INPROG | CAM_PERIPH_SENSE_INPROG)) {
1517                 /*
1518                  * If error recovery is already in progress, don't attempt
1519                  * to process this error, but requeue it unconditionally
1520                  * and attempt to process it once error recovery has
1521                  * completed.  This failed command is probably related to
1522                  * the error that caused the currently active error recovery
1523                  * action so our  current recovery efforts should also
1524                  * address this command.  Be aware that the error recovery
1525                  * code assumes that only one recovery action is in progress
1526                  * on a particular peripheral instance at any given time
1527                  * (e.g. only one saved CCB for error recovery) so it is
1528                  * imperitive that we don't violate this assumption.
1529                  */
1530                 error = ERESTART;
1531         } else {
1532                 scsi_sense_action err_action;
1533                 struct ccb_getdev cgd;
1534
1535                 /*
1536                  * Grab the inquiry data for this device.
1537                  */
1538                 xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, CAM_PRIORITY_NORMAL);
1539                 cgd.ccb_h.func_code = XPT_GDEV_TYPE;
1540                 xpt_action((union ccb *)&cgd);
1541
1542                 if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)
1543                         err_action = scsi_error_action(&ccb->csio,
1544                                                        &cgd.inq_data,
1545                                                        sense_flags);
1546                 else if ((ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)
1547                         err_action = SS_REQSENSE;
1548                 else
1549                         err_action = SS_RETRY|SSQ_DECREMENT_COUNT|EIO;
1550
1551                 error = err_action & SS_ERRMASK;
1552
1553                 /*
1554                  * If the recovery action will consume a retry,
1555                  * make sure we actually have retries available.
1556                  */
1557                 if ((err_action & SSQ_DECREMENT_COUNT) != 0) {
1558                         if (ccb->ccb_h.retry_count > 0 &&
1559                             (periph->flags & CAM_PERIPH_INVALID) == 0)
1560                                 ccb->ccb_h.retry_count--;
1561                         else {
1562                                 *action_string = "Retries exhausted";
1563                                 goto sense_error_done;
1564                         }
1565                 }
1566
1567                 if ((err_action & SS_MASK) >= SS_START) {
1568                         /*
1569                          * Do common portions of commands that
1570                          * use recovery CCBs.
1571                          */
1572                         orig_ccb = xpt_alloc_ccb_nowait();
1573                         if (orig_ccb == NULL) {
1574                                 *action_string = "Can't allocate recovery CCB";
1575                                 goto sense_error_done;
1576                         }
1577                         /*
1578                          * Clear freeze flag for original request here, as
1579                          * this freeze will be dropped as part of ERESTART.
1580                          */
1581                         ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1582                         bcopy(ccb, orig_ccb, sizeof(*orig_ccb));
1583                 }
1584
1585                 switch (err_action & SS_MASK) {
1586                 case SS_NOP:
1587                         *action_string = "No recovery action needed";
1588                         error = 0;
1589                         break;
1590                 case SS_RETRY:
1591                         *action_string = "Retrying command (per sense data)";
1592                         error = ERESTART;
1593                         break;
1594                 case SS_FAIL:
1595                         *action_string = "Unretryable error";
1596                         break;
1597                 case SS_START:
1598                 {
1599                         int le;
1600                         if (SID_TYPE(&cgd.inq_data) == T_SEQUENTIAL) {
1601                                 xpt_free_ccb(orig_ccb);
1602                                 ccb->ccb_h.status |= CAM_DEV_QFRZN;
1603                                 *action_string = "Will not autostart a "
1604                                     "sequential access device";
1605                                 err_action = SS_FAIL;
1606                                 error = EIO;
1607                                 break;
1608                         }
1609
1610                         /*
1611                          * Send a start unit command to the device, and
1612                          * then retry the command.
1613                          */
1614                         *action_string = "Attempting to start unit";
1615                         periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
1616
1617                         /*
1618                          * Check for removable media and set
1619                          * load/eject flag appropriately.
1620                          */
1621                         if (SID_IS_REMOVABLE(&cgd.inq_data))
1622                                 le = TRUE;
1623                         else
1624                                 le = FALSE;
1625
1626                         scsi_start_stop(&ccb->csio,
1627                                         /*retries*/1,
1628                                         camperiphdone,
1629                                         MSG_SIMPLE_Q_TAG,
1630                                         /*start*/TRUE,
1631                                         /*load/eject*/le,
1632                                         /*immediate*/FALSE,
1633                                         SSD_FULL_SIZE,
1634                                         /*timeout*/50000);
1635                         break;
1636                 }
1637                 case SS_TUR:
1638                 {
1639                         /*
1640                          * Send a Test Unit Ready to the device.
1641                          * If the 'many' flag is set, we send 120
1642                          * test unit ready commands, one every half
1643                          * second.  Otherwise, we just send one TUR.
1644                          * We only want to do this if the retry
1645                          * count has not been exhausted.
1646                          */
1647                         int retries;
1648
1649                         if ((err_action & SSQ_MANY) != 0) {
1650                                 *action_string = "Polling device for readiness";
1651                                 retries = 120;
1652                         } else {
1653                                 *action_string = "Testing device for readiness";
1654                                 retries = 1;
1655                         }
1656                         periph->flags |= CAM_PERIPH_RECOVERY_INPROG;
1657                         scsi_test_unit_ready(&ccb->csio,
1658                                              retries,
1659                                              camperiphdone,
1660                                              MSG_SIMPLE_Q_TAG,
1661                                              SSD_FULL_SIZE,
1662                                              /*timeout*/5000);
1663
1664                         /*
1665                          * Accomplish our 500ms delay by deferring
1666                          * the release of our device queue appropriately.
1667                          */
1668                         *relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1669                         *timeout = 500;
1670                         break;
1671                 }
1672                 case SS_REQSENSE:
1673                 {
1674                         *action_string = "Requesting SCSI sense data";
1675                         periph->flags |= CAM_PERIPH_SENSE_INPROG;
1676                         /*
1677                          * Send a Request Sense to the device.  We
1678                          * assume that we are in a contingent allegiance
1679                          * condition so we do not tag this request.
1680                          */
1681                         scsi_request_sense(&ccb->csio, /*retries*/1,
1682                                            camperiphsensedone,
1683                                            &orig_ccb->csio.sense_data,
1684                                            orig_ccb->csio.sense_len,
1685                                            CAM_TAG_ACTION_NONE,
1686                                            /*sense_len*/SSD_FULL_SIZE,
1687                                            /*timeout*/5000);
1688                         break;
1689                 }
1690                 default:
1691                         panic("Unhandled error action %x", err_action);
1692                 }
1693
1694                 if ((err_action & SS_MASK) >= SS_START) {
1695                         /*
1696                          * Drop the priority, so that the recovery
1697                          * CCB is the first to execute.  Freeze the queue
1698                          * after this command is sent so that we can
1699                          * restore the old csio and have it queued in
1700                          * the proper order before we release normal
1701                          * transactions to the device.
1702                          */
1703                         ccb->ccb_h.pinfo.priority--;
1704                         ccb->ccb_h.flags |= CAM_DEV_QFREEZE;
1705                         ccb->ccb_h.saved_ccb_ptr = orig_ccb;
1706                         ccb->ccb_h.recovery_depth = 0;
1707                         error = ERESTART;
1708                 }
1709
1710 sense_error_done:
1711                 if ((err_action & SSQ_PRINT_SENSE) != 0
1712                  && (ccb->ccb_h.status & CAM_AUTOSNS_VALID) != 0)
1713                         cam_error_print(orig_ccb, CAM_ESF_ALL, CAM_EPF_ALL);
1714         }
1715         return (error);
1716 }
1717
1718 /*
1719  * Generic error handler.  Peripheral drivers usually filter
1720  * out the errors that they handle in a unique mannor, then
1721  * call this function.
1722  */
1723 int
1724 cam_periph_error(union ccb *ccb, cam_flags camflags,
1725                  u_int32_t sense_flags, union ccb *save_ccb)
1726 {
1727         struct cam_periph *periph;
1728         const char *action_string;
1729         cam_status  status;
1730         int         frozen;
1731         int         error, printed = 0;
1732         int         openings;
1733         u_int32_t   relsim_flags;
1734         u_int32_t   timeout = 0;
1735
1736         periph = xpt_path_periph(ccb->ccb_h.path);
1737         action_string = NULL;
1738         status = ccb->ccb_h.status;
1739         frozen = (status & CAM_DEV_QFRZN) != 0;
1740         status &= CAM_STATUS_MASK;
1741         openings = relsim_flags = 0;
1742
1743         switch (status) {
1744         case CAM_REQ_CMP:
1745                 error = 0;
1746                 break;
1747         case CAM_SCSI_STATUS_ERROR:
1748                 error = camperiphscsistatuserror(ccb,
1749                                                  camflags,
1750                                                  sense_flags,
1751                                                  &openings,
1752                                                  &relsim_flags,
1753                                                  &timeout,
1754                                                  &action_string);
1755                 break;
1756         case CAM_AUTOSENSE_FAIL:
1757                 xpt_print(ccb->ccb_h.path, "AutoSense failed\n");
1758                 error = EIO;    /* we have to kill the command */
1759                 break;
1760         case CAM_ATA_STATUS_ERROR:
1761                 if (bootverbose && printed == 0) {
1762                         xpt_print(ccb->ccb_h.path, "ATA status error\n");
1763                         cam_error_print(ccb, CAM_ESF_ALL, CAM_EPF_ALL);
1764                         printed++;
1765                 }
1766                 /* FALLTHROUGH */
1767         case CAM_REQ_CMP_ERR:
1768                 if (bootverbose && printed == 0) {
1769                         xpt_print(ccb->ccb_h.path,
1770                             "Request completed with CAM_REQ_CMP_ERR\n");
1771                         printed++;
1772                 }
1773                 /* FALLTHROUGH */
1774         case CAM_CMD_TIMEOUT:
1775                 if (bootverbose && printed == 0) {
1776                         xpt_print(ccb->ccb_h.path, "Command timed out\n");
1777                         printed++;
1778                 }
1779                 /* FALLTHROUGH */
1780         case CAM_UNEXP_BUSFREE:
1781                 if (bootverbose && printed == 0) {
1782                         xpt_print(ccb->ccb_h.path, "Unexpected Bus Free\n");
1783                         printed++;
1784                 }
1785                 /* FALLTHROUGH */
1786         case CAM_UNCOR_PARITY:
1787                 if (bootverbose && printed == 0) {
1788                         xpt_print(ccb->ccb_h.path,
1789                             "Uncorrected parity error\n");
1790                         printed++;
1791                 }
1792                 /* FALLTHROUGH */
1793         case CAM_DATA_RUN_ERR:
1794                 if (bootverbose && printed == 0) {
1795                         xpt_print(ccb->ccb_h.path, "Data overrun\n");
1796                         printed++;
1797                 }
1798                 /* decrement the number of retries */
1799                 if (ccb->ccb_h.retry_count > 0 &&
1800                     (periph->flags & CAM_PERIPH_INVALID) == 0) {
1801                         ccb->ccb_h.retry_count--;
1802                         error = ERESTART;
1803                 } else {
1804                         action_string = "Retries exhausted";
1805                         error = EIO;
1806                 }
1807                 break;
1808         case CAM_UA_ABORT:
1809         case CAM_UA_TERMIO:
1810         case CAM_MSG_REJECT_REC:
1811                 /* XXX Don't know that these are correct */
1812                 error = EIO;
1813                 break;
1814         case CAM_SEL_TIMEOUT:
1815         {
1816                 struct cam_path *newpath;
1817
1818                 if ((camflags & CAM_RETRY_SELTO) != 0) {
1819                         if (ccb->ccb_h.retry_count > 0 &&
1820                             (periph->flags & CAM_PERIPH_INVALID) == 0) {
1821
1822                                 ccb->ccb_h.retry_count--;
1823                                 error = ERESTART;
1824                                 if (bootverbose && printed == 0) {
1825                                         xpt_print(ccb->ccb_h.path,
1826                                             "Selection timeout\n");
1827                                         printed++;
1828                                 }
1829
1830                                 /*
1831                                  * Wait a bit to give the device
1832                                  * time to recover before we try again.
1833                                  */
1834                                 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1835                                 timeout = periph_selto_delay;
1836                                 break;
1837                         }
1838                         action_string = "Retries exhausted";
1839                 }
1840                 error = ENXIO;
1841                 /* Should we do more if we can't create the path?? */
1842                 if (xpt_create_path(&newpath, periph,
1843                                     xpt_path_path_id(ccb->ccb_h.path),
1844                                     xpt_path_target_id(ccb->ccb_h.path),
1845                                     CAM_LUN_WILDCARD) != CAM_REQ_CMP)
1846                         break;
1847
1848                 /*
1849                  * Let peripheral drivers know that this device has gone
1850                  * away.
1851                  */
1852                 xpt_async(AC_LOST_DEVICE, newpath, NULL);
1853                 xpt_free_path(newpath);
1854                 break;
1855         }
1856         case CAM_REQ_INVALID:
1857         case CAM_PATH_INVALID:
1858         case CAM_DEV_NOT_THERE:
1859         case CAM_NO_HBA:
1860         case CAM_PROVIDE_FAIL:
1861         case CAM_REQ_TOO_BIG:
1862         case CAM_LUN_INVALID:
1863         case CAM_TID_INVALID:
1864                 error = EINVAL;
1865                 break;
1866         case CAM_SCSI_BUS_RESET:
1867         case CAM_BDR_SENT:
1868                 /*
1869                  * Commands that repeatedly timeout and cause these
1870                  * kinds of error recovery actions, should return
1871                  * CAM_CMD_TIMEOUT, which allows us to safely assume
1872                  * that this command was an innocent bystander to
1873                  * these events and should be unconditionally
1874                  * retried.
1875                  */
1876                 if (bootverbose && printed == 0) {
1877                         xpt_print_path(ccb->ccb_h.path);
1878                         if (status == CAM_BDR_SENT)
1879                                 printf("Bus Device Reset sent\n");
1880                         else
1881                                 printf("Bus Reset issued\n");
1882                         printed++;
1883                 }
1884                 /* FALLTHROUGH */
1885         case CAM_REQUEUE_REQ:
1886                 /* Unconditional requeue */
1887                 if (bootverbose && printed == 0) {
1888                         xpt_print(ccb->ccb_h.path, "Request requeued\n");
1889                         printed++;
1890                 }
1891                 if ((periph->flags & CAM_PERIPH_INVALID) == 0)
1892                         error = ERESTART;
1893                 else {
1894                         action_string = "Retries exhausted";
1895                         error = EIO;
1896                 }
1897                 break;
1898         case CAM_RESRC_UNAVAIL:
1899                 /* Wait a bit for the resource shortage to abate. */
1900                 timeout = periph_noresrc_delay;
1901                 /* FALLTHROUGH */
1902         case CAM_BUSY:
1903                 if (timeout == 0) {
1904                         /* Wait a bit for the busy condition to abate. */
1905                         timeout = periph_busy_delay;
1906                 }
1907                 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT;
1908                 /* FALLTHROUGH */
1909         default:
1910                 /* decrement the number of retries */
1911                 if (ccb->ccb_h.retry_count > 0 &&
1912                     (periph->flags & CAM_PERIPH_INVALID) == 0) {
1913                         ccb->ccb_h.retry_count--;
1914                         error = ERESTART;
1915                         if (bootverbose && printed == 0) {
1916                                 xpt_print(ccb->ccb_h.path, "CAM status 0x%x\n",
1917                                     status);
1918                                 printed++;
1919                         }
1920                 } else {
1921                         error = EIO;
1922                         action_string = "Retries exhausted";
1923                 }
1924                 break;
1925         }
1926
1927         /*
1928          * If we have and error and are booting verbosely, whine
1929          * *unless* this was a non-retryable selection timeout.
1930          */
1931         if (error != 0 && bootverbose &&
1932             !(status == CAM_SEL_TIMEOUT && (camflags & CAM_RETRY_SELTO) == 0)) {
1933                 if (error != ERESTART) {
1934                         if (action_string == NULL)
1935                                 action_string = "Unretryable error";
1936                         xpt_print(ccb->ccb_h.path, "Error %d, %s\n",
1937                             error, action_string);
1938                 } else if (action_string != NULL)
1939                         xpt_print(ccb->ccb_h.path, "%s\n", action_string);
1940                 else
1941                         xpt_print(ccb->ccb_h.path, "Retrying command\n");
1942         }
1943
1944         /* Attempt a retry */
1945         if (error == ERESTART || error == 0) {
1946                 if (frozen != 0)
1947                         ccb->ccb_h.status &= ~CAM_DEV_QFRZN;
1948                 if (error == ERESTART)
1949                         xpt_action(ccb);
1950                 if (frozen != 0)
1951                         cam_release_devq(ccb->ccb_h.path,
1952                                          relsim_flags,
1953                                          openings,
1954                                          timeout,
1955                                          /*getcount_only*/0);
1956         }
1957
1958         return (error);
1959 }